Enhanced Multimedia Router - EMR

Enhanced Multimedia Router - EMR
Sumavision
Enhanced Multimedia Router
Product Catalogue
2014 V3.0
1
Index
EMR Overview…………………….. 3
Optional Modules Overview .…......4
Modules Introduction …………….. 6-24
Typical Applications ………………24-31
2
1
Overview
Enhanced Multimedia Router
- EMR
Sumavision’s Enhanced Multimedia Router (EMR) is a standard platform on which users can realize all Digital TV
head end functions. EMR is one rack-unit (1-RU) signal processing platform with flexible card-insertion structure (6
slots).
EMR
can
support
“Any
input”
(DVB-S/S2/ASI/IP/DS3/E3
and
etc.),
“Any
processing”
(encoding/decoding/multiplexing/scrambling, and etc.) and “Any output “(DVB-S/S2/ASI/IP/DS3/E3 etc)”. EMR is
available for any applications beyond your imagination besides encoding, decoding, multiplexing, transcoding,
transmodulating, etc.
HIGHLIGHT

Support flexible combination of any different type of functional cards

Massive internal multiplexing: maximum 8.5G data processing

Maximum 24 IRDs for DVB-S/S2 FTA streams

Maximum 20 IRDs for DVB-S/S2 encrypted streams

Multi-encoding support: SD/HD MPEG-2/MPEG-4/H.264

Maximum 24 programs MPEG-2/H.264 encoding/decoding

Maximum 36/72 QAM outputs

Maximum 30 ASI inputs or 30 ASI outputs

Maximum 8G IP inputs/outputs

Maximum 512 streams/2048 programs scrambling over IP

Support IPTV and conversion of MPTS from any type of inputs to SPTS

Support dual-power supply and hot-swap

Maximum 180 programs statistic multiplexing

Maximum 512 SPTS IP output through Gbe IP Ports
3
Optional Modules Overview
Modules
Analog MPEG2 SD
Encoding Modules
Digital MPEG2 SD
Encoding Modules
Dolby AC-3 Encoding
Module
HD Encoding Modules
Transcoding module
Decoding Modules
ASI Interface
Modules
Product Name
Description
Page
C101AS
MPEG-2 Analog SD Encoding Card
C101A
MPEG-2 Analog Encoding Card
C103A
Analog Audio Encoding Card
C101D
MPEG-2 Digital Encoding Card
P7
C103D
Digital Audio Encoding Card
P8
C103DB
Dolby AC-3 Encoding Card
P8
C101H
MPEG-2 HD encoding card
C150(L/S)
H.264 HD Encoding Card
C150 A
H.264 Analog Encoding Card
C150 D
H.264 Digital Encoding Card
C131
Multi MPEG-2/H.264 Encoding & Tanscoding
Card
P12
C201AS
Analog Decoding Card
P13
C202DH
Digital HD Decoding Card
P13
C204
HD 4:2:2 Decoding Card
P13
C304
4 ASI Output Card
P6
P7
P7
P9
P9
P10
P11
P14
4
C304S
4 ASI Output &Scrambling Card
C350
5 ASI Input Card
C355
ASI Input&Output Card
CA07
ASI Splitter Card
P15
P15
C409
ATM Adapter Card
P16
C416
DS3/E3 Card
P16
C471S
Scrambling Card
C472S
IP Scrambling Card
C510CI
De-scrambling Card
P14
Adapting Modules
Scrambling &
De-scrambling Modules
P17
QAM Output Card
P18
4-frequency DVB-S2 demodulation receiving
card
DVB-C Demodulation & Descrambling Card
P18
DVB-S/S2 De-scrambling Receiver Card
P19
DVB-S/S2 Modulation Card
P19
4 Frequencies DVB-T2 De-modulating Card
P20
4 Un-adjust Frequencies DVB-T2 Modulating
Card
DVB-S/S2 De-Scrambling&De-Modulation
Receiving Card
P20
24-UN adjacent-channel QAM Modulating card
P21
C707
30-Channel Statistic Multiplexing Card
P22
C302MH
ATSC M/H Statistic Multiplexing Card
P22
C409
ATM Adapter Card
P22
C416
DS3/E3 Card
P23
C451
GbE IP Card
P23
C653/C653C
Dual-Channel GbE IP Card
P23
C302SI
EPG processing card
P23
C508
C545
C523 CI
C515CI
Modulating
&Demodulating Modules
C507S
C544
C508T
C525CI
C518
Statistic Multiplexing
Modules
5
P19
P21
Switch Modules
CA05
RF Switch Card
CA01B
ASI Switch Card
CA04
IP Switch Card
P24
Modules Introduction
Analog MPEG2 SD Encoding Modules
Product
C101AS
MPEG-2 Analog
Encoding Card
Description
Specification
2 channels MPEG-2 4:2:0
MP@ML analog video
coding, and 2 channels
analog
stereo
audio
encoding





Input:
Video: 2 x CVBS, BNC
Audio: 2 x Analog Stereo,
Balanced
 Audio Formats: MPEG-1 Audio Layer I, MPEG-1 Audio
Video format: MPEG-2 4:2:0 MP@ML
Image format: PAL, NTSC, PAL-M, PAL-N, SECAM
Video encoding bit rate: CBR/VBR ,1.5~15Mb/s
Frame rate:PAL@25fps,NTSC@30fps,Secam@25fps
Aspect ratio:4:3 or 16:9
Layer II
 Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
 Encoding Bit-Rate: 64 ~ 384Kbps
 2 stereo channels Dolby Digital® (AC-3) 2.0 encoding
(Option)
6
C101A (EMR2.1)
MPEG-2 Analog
Encoding Card
2 channels MPEG-2 4:2:0
MP@ML analog video
coding, and 2 channels
analog
stereo
audio
encoding





Input:
Video: 2 x CVBS, BNC
Audio: 2 x Analog Stereo,
Balanced
 Audio Formats: MPEG-1 Audio Layer I, MPEG-1 Audio
Video format: MPEG-2 4:2:0 MP@ML
Image format: PAL, NTSC, PAL-M, PAL-N, SECAM
Video encoding bit rate: CBR/VBR ,1.5~15Mb/s
Frame rate:PAL@25fps,NTSC@30fps,Secam@25fps
Aspect ratio:4:3 or 16:9
Layer II
 Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
 Encoding Bit-Rate: 64 ~ 384Kbps
 2 stereo channels Dolby Digital® (AC-3) 2.0 encoding
(Option)
C103A
Analog Audio Encoding
Card
 Audio Formats: MPEG-1 Audio Layer I, MPEG-1 Audio
Provides 2 analog stereo
audio encoding
Layer II
 Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
 Encoding Bit-Rate: 64 ~ 384Kbps
 2 stereo channels Dolby Digital® (AC-3) 2.0 encoding
Input:
Audio: 2 x Analog Stereo,
Balanced
(Option)
Digital MPEG2 SD Encoding Modules
Product
C101D
MPEG-2 Digital Encoding
Card
Description
Specification
2 channels MPEG-2 4:2:0
MP@ML
digital
video
encoding, and 2 channels
digital audio encoding





Input:
Video: 2 x SDI
(Audio Embedded),BNC
Audio: 2 x AES/EBU, BNC
 Audio Formats: MPEG-1 Audio Layer I, MPEG-1 Audio
Video format: MPEG-2 4:2:0 MP@ML
Image format: PAL, NTSC, PAL-M, PAL-N, SECAM
Video encoding bit rate: CBR/VBR ,1.5~15Mb/s
Frame rate:PAL@25fps,NTSC@30fps,Secam@25fps
Aspect ratio:4:3 or 16:9
Layer II
 Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
 Encoding Bit-Rate: 64 ~ 384Kbp
 2 stereo channels Dolby Digital® (AC-3) 2.0 encoding
(Option)
7
C103D
Digital Audio Encoding
Card
2 channel
encoding
digital
audio




Audio Formats: MPEG-1 Audio Layer I, MPEG-1 Audio Layer II
Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
Encoding Bit-Rate: 64 ~ 384Kbps
2 stereo channels Dolby Digital® (AC-3) 2.0 encoding (Option)
Input:
Audio: 2 x Digital Stereo,
BNC
Dolby AC-3 Encoding Module
Product
Description
C103DB
2 channels 2.0 stereo
professional
audio
encoding, and 5.1 AC-3
professional
audio
encoding on HD encoding
card
Dolby AC-3 Encoding
Card
Specification




Audio Formats: AC-3 2.0, AC-3 5.1
Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
Encoding Bit-Rate: 56kbps-640kbps
Dynamic Range: ≤ -90dBFS@48KHz,
≤ -84dBFS@44.1kHz, 32kHz
 Support audio/video Synchronization, audio/video
asynchronous time +5/-15ms
Dolby AC-3 Encoding Card
is attached on other
encoding cards instead of
occupying slot
8
HD Encoding Modules
Product
Description
1 channel MPEG-2 HD
video encoding
C101H
MPEG-2 HD encoding
card
Input:
Video: 1 x YPbPr/CVBS,
BNC x 3;
1 x HD-SDI, (audio
embedded), BNC
Audio: 3 x AES/EBU, BNC;
3 x Analog Stereo,
Balanced
Specification

Video format: MPEG-2 MP@ML, MPEG-2 4:2:2P@ML,
MPEG-2 MP@HL, MPEG-2 MP@H14L Resolution :
1080i、720p

Resolution:
- SD: 480p 720x480@59.94Hz
576p 720x576@50Hz
480i 720x480@29.97Hz
576i
720x576@25Hz
- HD: 1080i 1920x1080@29.97/25Hz,
1080i 1440x1080@29.97/25Hz,
720p 1280x720@59.94/50/29.97/25/23.97Hz
 Aspect ratio: 16:9, 4:3
 GOP: I/IP/IBP/IBBP
 Audio Formats: MPEG-1 Layer II
2 stereo channels Dolby Digital® (AC-3) 2.0 encoding
(Option)
Dolby Digital® (AC-3) 5.1 channel encoding (Option)
 Sampling frequency: 48 KHz
 Encoding Bit-Rate: 64 ~ 384Kbps( MPEG-1 Layer2)
 Volume adjustment: -24dB~6dB
C150 (L/S)
H.264 HD Encoding
Card
1 channel H.264 HD/SD video
encoding
Input:
Video: 1 x HD-SDI, BNC
1 × HDMI, HDMI
1 x YPbPr,
extended via DVI
1 x CVBS ,
extended via DVI
Audio:1 × HD-SDI,
embedded audio (4 in 8).
1 × HDMI,
embedded audio (4 in 4).
4 × AES/EBU,
extended via DVI.
2 × analog stereo audio,
extended via DVI.
9
Video Input format:
HD: 1920×1080 60i/59.94i/50i/24p/23.98p
1280×720 60i/59.94p/50p
SD: 720×576 50i, 720×608 50i
720×480 59.94i, 720×512 59.94i
Resolution/Frame Rate self-adaptive
Video Encoding
 Encoding profile: Baseline, Main, High, High4:2:2
 Encoding Level: 1.0 ~1.3, 2.0~2.2, 3.0~3.2, 4.0~4.2, 5.0~5.1
 Encoding resolution:
1920×1080, 1280×720
720×576, 720×480
 Aspect Ratio: 4:3/16:9
 Encoding Bit-rate: 0.1Mb/s - 25Mb/s
H.264 HD recommended bit-rate: 6Mb/s - 12Mb/s
H.264 SD recommended bit-rate: 1.5Mb/s - 3Mb/s
 Bit-rate Control: CBR/VBR
 GOP Length: 1~30
 GOP Structure: Open GOP/Closed GOP
 B Frame number: 0, 1, 2, 3
 Self-adaptive I Frame Insertion
 Entropy code: CABAC、CAVLC
 Preprocessing: de-interlacing, noise reduction, sharpen
Encoding delay: 0.7s
------------------------------------------------------------------------------- MP2、AAC-LC、HE-AAC v1 、HE-AAC v2、Dolby Digital
Professional
 Sampling frequency: 48kHz/44.1kHz/32kHz
 Sample size: 24-bit
 Encoding rates:
AC3-PE: (only support 48kHz sampling frequency)
Stereo, 96kbps-384kbps
AAC-LC:
Stereo, 32kbps~284kbps
Dual, 32kbps~284kbps
Mono, 32kbps~192kbps
HE-AAC v1:
Stereo, 32kbps~192kbps
Dual, 32kbps~192kbps
Mono, 32kbps~96kbps
HE-AAC v2:
Stereo, 32kbps~96kbps
MPEG-1 LayII:
Stereo, 64kbps,96kbps~384kbps
Mono, 32kbps~192kbps
Audio pass-through
 MP2、AAC-LC、HE-AAC v1、HE-AAC v2、
Dolby Digital Professional

C150 A
2 channel H.264 SD Analog
encoding
H.264 Analog
Encoding Card
Input
2
interface
Video:
× CVBS,
Audio: 2 x Analog stereo
(balanced);
BNC
Video

Encoding profile: Baseline, Main, High

Encoding Level: 3.0~3.2, 4.0

Encoding resolution: 720/480/352×576/480

Encoding Bit-rate: 0.3Mb/s - 10Mb/s

Aspect ratio: 4:3, 16:9

Entropy encoding: CABAC, CAVLC

GOP structure: IBBP, IBP
----------------------------------------------------------------------Audio
 Audio Formats: MP2、AAC-LC、HE-AAC v1、HE-AAC
v2、Dolby Digital Professional

Sampling frequency: 48K/44.1K/32K

Encoding Bit-Rate: 32Kb/s ~384Kb/s
10
C150 D
2 channel H.264 HD/SD Digital
encoding
H.264 Digital Encoding
Card
Input:
Video:

2 × HD-SDI digital video,
BNC interface

2 × HDMI digital video,
HDMI interface
Audio:



11
1 x Analog stereo
(balanced);
2 × HD-SDI embedded
audio (4 in 8)
2 × HDMI embedded
audio (4 in 4)
Video

Encoding profile: Baseline, Main, High

Encoding Level: 3.0~3.2, 4.0~4.1

Encoding resolution:
1920/1440/1280/960×1080
1280/960/640×720
720/544/480/352×576/480

Encoding Bit-rate: 0.3Mb/s - 25Mb/s
H.264 HD recommended bit-rate: 6Mb/s - 12Mb/s
H.264 SD recommended bit-rate: 1.5Mb/s - 3Mb/s

Aspect ratio: 4:3, 16:9

Entropy encoding: CABAC, CAVLC

GOP structure: IBBP, IBP(1080i)
Audio
 Audio Formats: MP2、AAC-LC、HE-AAC v1、HE-AAC
v2、Dolby Digital Professional

Sampling frequency: 48K/44.1K/32K

Encoding Bit-Rate: 32Kb/s ~384Kb/s
Transcoding module
Product
C131
Multi MPEG-2/H.264
Encoding &
Tanscoding Card
Description
Specification
4 H.264 SD / 2 H.264 HD channels
Encoding & 8 MPEG2/H.264 SD
or 2 HD Programs Transcoding
Input:
MPEG2/H.264 programs
EMR main board
from
Output:
No output Physical Interface,
H.264/MPEG2 programs output by
other card
Video Input:

Resolution self-adaption:
 1920/1440/1280/960x1080
 1280/960/640x720
 720/704/544/528/480/352x576
 720/704/544/528/480/352x480

Frame rate self-adaption:
 23.98p/59.94i/60i/50i
 59.94p/60p/50p
 50i
 59.94i

Video format:
MPEG-2
Main Profile/High level
H.264
Profile :Baseline, Main, High
Level:1.0~1.3、2.0~2.2、3.0~3.2, 4.0~4.1
IDR Frame Frequency: 0~5 GOPs
Video Output:

Resolution:
 1920/1440/1280/960x1080
 1280/960/640x720
 720/704/544/528/480/352x576
 720/704/544/528/480/352x480

Frame rate:

23.98p/59.94i/60i/50i

59.94p/60p/50p

50i

59.94i

Video format:
D1:H.264/AVC 4:2:0 MP@Level 3.0
HD:H.264/AVC 4:2:0 HP@Level 4.0

Output Bitrate:
D1:2-10Mb/s
1280x720p:4-20Mb/s
1440x1080i:5-20Mb/s
1920x1080i:6-20Mb/s

Bitrate control: CBR/VBR

GOP Lengh:1~600

B Frame Number: 0,1,2,3,4,5,6,7

Entropy coding:CABAC, CAVLC
Audio:
Mpeg-l layer2、AAC-LC、HE-AAC v1、HE-AAC v2、Dolby
Digital、Dolby Digital Plus、LPCM
Audio Pass Through
12
Decoding Modules
Product
C201AS
Analog Decoding Card
Description
2
channels
multi-format
(MPEG-2 / H.264) SD analog
video decoding, and HD video
decoding to SD video
Specification




Output:
Video: 2 x CVBS, BNC
Audio: 2 x Analog Stereo,
Balanced




C202DH
Digital HD Decoding
Card
2
channels
multi-format
(MPEG-2 、 H.264) signal
SD/HD video decoding



Output:
Video: 2 x HDSDI,BNC
Audio: HD-SDI or AES(EBU)
( Audio Embedded)





C204
H.264/MPEG-2 HD
4:2:2 DECODING
CARD
13
1 channel SDI with embedded
audio (supports YPbPr/ CVBS
output)
0utput:
Video: 1 x YPbPr, BNC;
1 x CVBS,
(Same port with Y);
1x HD-SDI,
(audio embedded )
BNC;
1x HD-SDI(Backup)
(audio embedded )
BNC;
Audio:1 x Analo stereo (balanced);
1 x AES/EBU
(balanced)
Video format: MPEG-2 HD/SD MP@HL;
H.264/AVC High Level 4.1 high profile
Image resolution: 1080i、720p, downward-compatible
Aspect ratio: 4:3
Frame rate:PAL@25fps,NTSC@30fps
Audio Formats: MPEG-1 Layer II
Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
Encoding Bit-Rate: 32 ~ 384Kbps
Output volume adjustment: -30dB~0dB
Video format: MPEG-2 HD/SD MP@ML;
H.264/AVC High Level 4.1 high profile
Image format: PAL, NTSC
Aspect ratio: 16:9, 4:3
Image resolution:1080i、720p,downward-compatible
Audio Formats: MPEG-1 Layer II
Sampling frequency: 32 KHz, 44.1 KHz, 48 KHz
Encoding Bit-Rate: 32 ~ 384Kbps
Output volume adjustment: -30dB~0dB
Video Decoding

SDI/YPbPr: 1080i(25/29.97/30fps), 720p(50/59.94/60fps),
576i(25fps), 480i(29.97fps), Self-adaptation of video
format

CVBS( SD): PAL, NTSC, PAL-N, PAL-M, Self-adaptation
for PAL/NTSC, Manual selection for other option

Decoding mode: H.264: High
422(8bit)Profile@422(4.0)Level
MPEG-2: 422Profile@High Level

Aspect ratio: 16:9, 4:3 Self-adaptation

DVB VBI: support Closed Caption(EIA-608, EIA-708)

Self-adaptation of 188/204 bytes
Audio Decoding

Decoding Mode:
Standard: MPEG-1 layer II, MPEG-2
Optional: Dolby Digital (AC-3), HE-ACC, AAC-LC

Sampling Precision: 16bit

Sampling rate: 48k/44.1k/32kHz

Decoding Bit-rate: 32kbps-384kbps

Sound Volume: -30dB~0dB
ASI Interface Modules
Product
C304
4 ASI Output Card
C304S(EMR2.1)
4 ASI Output
&Scrambling Card
Description
4 channels ASI outputs
Output: 4 x ASI
4 channels ASI outputs with
scrambling modules
Output: 4 x ASI
Specification

Maximum number of PID each port can support: 256

Maximum system bit rate and effective bit rate:200Mbps

Rise time(20%~80%)≤1200ps

Fall time (20%~80%) ≤1200ps

Deterministic Jitter ≤10%

Adaptively support TS package input of 188 or 204 byte

Output range: 800±80

Maximum number of PID each port can support: 256

Maximum system bit rate and effective bit rate:200Mbps

Adaptively support TS package input of 188 or 204 byte

8×scrambling modules, each module can independently
scramble

Rise time(20%~80%)≤1200ps

Fall time (20%~80%) ≤1200ps

Deterministic Jitter ≤10%

Output range: 800±80

Maximum bit rate (each ASI):200Mbps

Minimum accepting sensitivity ≤ 200mV

Maximum input Voltage ≥ 880mV

Return Loss(5MHz~270MHz)≤-20dB

Support port backup, card backup and program backup
C350
5 ASI Input Card
5 channels ASI inputs
Input: 5 x ASI
14
C355
5 channels ASI inputs and
outputs Card
ASI Input&Output Card
Input:
Up to 5x ASI
Output: Up to 5x ASI
CA07
1 channels ASI inputs and 4
channels outputs
ASI Splitter Card
Input: 1 x ASI
Output: 4 x ASI
15

Maximum bit rate (each ASI):213Mbps

Minimum accepting sensitivity ≤ 200mV

Maximum input Voltage ≥ 880mV

Return Loss(5MHz~270MHz)≤-20dB

Support port backup, card backup and program backup

Adaptively support TS packet input of 188 or 204 byte

Maximum input bit rate of every ASI is up to 270Mbps
Adapting Modules
Product
C409
Description
Receiving ATM signal and
output ATM signal
ATM Adapter Card
Input port:
1×BNC,ATM interface
Specification

Input port support 2 input streams

Output port support 2 output streams

Support SDH and SONET

Get ATM signal from input and output by other card

Get TS from EMR main board and output ATM signal
Output port:
1×BNC,ATM interface
C416
DS3/E3 Card
2 channels DS3/E3
with 1 channel ASI outputs
and 1 channel DS3/E3 with
1 channel ASI Input
1×DS3/E3 input
1×ASI input,
1×ASI output
2×DS3/E3 outputs

Maximum input bit rate of DS3 up to 44.736Mbps

Maximum input bit rate of E3 up to 34.368Mbps

Support SPTS/MPTS

Support ASIDS3/E3 bi-directional adapting

Protocol compatible for DIVICOM、TANDBERG、BARCO
PHILIPS、THOMSON、SCOPUS、Harmonic、Huawei、
ZTE
Support PCR correction

16
Scrambling & De-scrambling Modules
Product
C471S (EMR2.1)
Description
Scrambling Card attached
on GbE IP card
IP Scrambling Card
Specification
Maximum 40 AC for each TS stream, maximum 768 bytes

for each AC

Scrambling for 10 TS streams simultaneously

Support scrambling up to 64 programs for each TS
stream, up to 15 PID for each program
C472S
Scrambling Card attached
on mainboard
IP Scrambling Card

Support DVB and OpenCAS for EIS


Support the same EMM for different TS streams,
maximum 12 EMMs ,maximum bandwidth 2Mbps for
each EMM
Support 4 CAS Simulcrypt for each TS stream

Maximun 1024 programs scrambling with up to 2048 PIDs

Up to 8 ports output for each sub card

Up to support 255 programs scrambling for each port

Support 4 CAS Simulcrypt for each TS stream

No limited PIDs of each port with maximum 32 PID of
each program
C510CI
2 x CAM slot,
PCMCIA standard



De-scrambling Card




17
Input/output multiplex from backboard
Video: MPEG-1, MPEG-2, H.264
Audio: MPEG-1, MPEG-2
Supports simulcrypt
Supports 2 CAM cards (Common Interface CI)
Supports de-scramble for maximum 64 programs (up to
the capacities of the CAM cards)
Supports de-scramble for BISS
Modulating & Demodulating Modules
Product
C508
Description
1 RF output
QAM Output Card
Specification

ITU-T J.83 Annex A, B and C

64, 128, 256 QAM constellations

Frequency range 52-1000MHz
Each port provides 2/4/6

Symbol rate: 5M-7M(1K step)
adjacent QAM channels

Output level: 95 ~ 120 dBuV


MER(balanced off): ≥ 38
dB@256QAM
MER(balanced on): ≥ 44 dB

CNR: ≥ 55dB

PCR jitter:<100ns

Phase noise: ≤-65 dBc/Hz @1kHz, ≤-95 dBc/Hz
@10kHz, ≤-110 dBc/Hz @100kHz
C545
4-frequency DVB-S2
Demodulation Receiving Card
dB@64QAM,
≥
37
Receive frequency:950MHz~2150MHz
Effective receiving level:-65dB~-25dB

symbol rate:1Msps ~ 45Msps

Maximum TS bitrate:120Mbps(DVB-S2)

Modulation mode:
DVB-S2:QPSK、8PSK、16APSK、32APSK
DVB-S:QPSK

Roll-off coefficient:
DVB-S:0.35
DVB-S2:0.35,0.25,0.2

Convolution code rate:
DVB-S:1/2,2/3,3/4,5/6,7/8.
DVB-S2:1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10

22KHz on/off

LNB power:13V、18V、option closed

C/Ku band compatibility:support

TS interruption recovery function:support

De-scrambling function: Support BISS de-scrambling,
each channel can support 8 programs de-scrambling,
then 4 channels on 1 card can support 32 programs
simultaneously

4 channels satellite signal
Input
Input:4×RF inputs

18
C515CI
DVB-S/S2 De-scrambling
Receiver Card
1 RF Input and 1 RF loop
output

Frequency range: 950MHz~2150MHz

Received signal level: -65dB~-25dB

Symbol range: 1Msps ~ 45Msps

FEC: DVB-S 1/2, 2/3, 3/4, 5/6, 7/8,DVB-S2 1/2, 3/5,
2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Input: 1 x RF
Loop output: 1 x RF
C523CI
DVB-C Demodulation &
Descrambling Card
1 RF Input and 1 RF loop
output

Support SCPC/MCPC

Polarization: Vertical, Horizontal

Roll-off factor : 20%, 25%, 35%

Support C/Ku band

Support QPSK/8PSK

Maximum 16 programs de-scrambling

Frequency range: 54MHz~866MHz

Received signal level: ≥45dbuv

Symbol range:
Annex B 64QAM 5.057
Annex B 256QAM 5.360
Input: 1 x RF
Loop output: 1 x RF
C507S

Annex A 3-7
FEC: ITU J.83 Annex A/B/C compatible

Bandwidth: 6M, 8M

Maximum 16 programs de-scrambling
Receive frequency:950MHz~2150MHz
Output level:73.0 dBuV~113.0 dBuV

symbol rate:50K~45000K

FEC Modulation mode:
DVB-S2:

1 channel
signal output
satellite
DVB-S/S2 Modulation Card
Input:1×ASI input

QPSK-1/4;QPSK-1/3;QPSK-2/5;QPSK-1/2;QPSK-3/5;QPSK-2/3;
QPSK-3/4;
QPSK-4/5;
QPSK-5/6;
QPSK-8/9;
QPSK-9/10;
8PSK-3/5; 8PSK-2/3;
8PSK-3/4;
8PSK-5/6;
8PSK-8/9;
8PSK-9/10;
16APSK-2/3;
16APSK-3/4;16APSK-4/5;
16APSK-5/6;16APSK-8/9;
16APSK-9/10;32APSK-3/4;32APSK-4/5;32APSK-5/6;
32APSK-8/9;32APSK-9/10
DVB-S:
QPSK-1/2、QPSK-2/3、QPSK-3/4、QPSK-5/6、QPSK-7/8

Roll-off factor:35%、25%、20%

19
FEC-frames:64800
bits/2025 bytes
bits/8100
bytes
or 16200
C544
4 Frequencies DVB-T2
De-modulating Card
Receive 4 DVB-T/T2/C streams
Input: 4 x RF

Received Frequency range: 52MHz~858MHz

Received signal level: -75dBm~-5dBm

Received bandwidth(DVB-T2):5MHz,6MHz, 7 MHz, 8
MHz
Symbol rate range(DVB-C): 1Msps ~ 7Msps





Modulation mode: 16QAM, 64QAM, QPSK
Support 5,6,7 or 8MHz bandwidth

Frequency range: 42-870MHz (4-unadjacent-channel
in one RF port)

Tuning Frequency Step: 1KHz

Output Electric Level range: 90-120 dBuV

MER(unequalized): ≥40@64QAM

SNR: ≥55dBc@64QAM

PCR Jitter: ≤100ns

Phase Noise: ≤-85dB@1KHz, ≤-103dB@10KHz,
≤-115dB@100KHz

RF Output : F-type connector, 75Ω

Support fixed PID Mapping

Maximum PID in each port: 256

Capable of multiplex TS stream from any card of EMR

C508T
4 Un-adjust Frequencies
DVB-T2 Modulating Card
Modulating mode:
DVB-T2:QPSK, 16QAM, 64QAM,256QAM
DVB-T:QPSK, 16QAM, 64QAM
DVB-C: 64QAM,128QAM,256QAM
FEC:
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8
DVB-T:1/2,2/3,3/4,5/6,7/8
Carrier wave mode:
DVB-T2:1K、2K、4K、8K、16K、32K
DVB-T:2k、8k
Support BISS descramble :every port can descramble
8 programs

DVB-T/H 4 channels Un-adjust
Frequencies modulating
Output

One RF
Output(4-unadjacent-channel),
F-type connector

One RF Test port(-20dB),
SMA-type connector
20
C525CI
DVB-S/S2
De-Scrambling&De-Modulation
Receiving Card
Receive one DVB-S/S2
stream
Input: 1 x RF
2 CAM slots

Received Frequency range: 950MHz~2150MHz

Received signal level:

Symbol rate range: 1Msps ~ 45Msps

Modulating mode:
Support DVB-S2:QPSK、8PSK、16APSK、32APSK
DVB-S:QPSK
FEC:
DVB-S: 1/2,2/3,3/4,5/6,7/8.
DVB-S2:1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10 Support
SCPC/MCPC






C518
1 RF output
24 Un-adjacent
Frequencies QAM Output
Card
1 SFP GBE Input
1 RJ45 Control Port
Each port provides up to 24
un-adjacent QAM channels
-65dB~-25dB
Maximum 128 programs de-scrambling,
each program support 128 PIDs
CAM descrambling Single-slot maximum
transfer rate: 200Mbps (400Mbps
bandwidth is dynamically shared four ports)
BISS descrambling bandwidth: 108Mbps
(400Mbps bandwidth is dynamically shared
four ports)
Roll-off factor: DVB-S:0.35
DVB-S2:0.35,0.25,0.2

ITU-T J.83 Annex A

64, 128, 256 QAM constellations

6 or 8MHz bandwidth

Frequency range 45-1000MHz

Symbol rate: 3.5M-7M(1K step)

Output level: 95 ~ 122 dBuV

MER( unequalized ): ≥ 42

CNR: ≥ 60dBc@256QAM

PCR jitter:<200ns

Phase Noise: ≤-85dB@1KHz, ≤-100dB@10KHz,
≤-105dB@100KHz, ≤110@1M

RF Output : F-type connector, 75Ω

Support fixed PID Mapping

Maximum program NO. in each frequency: 64

Maximum PID NO. in each frequency:256

Capable of multiplex TS stream from SFP
module(960Mbps)

One EMR 3.0 can achieve 72 un- adjacent
frequencies RF output
21
Statistic Multiplexing Modules
Product
C707
30-Channel Statistic
Multiplexing Card
Description
4 channels ASI outputs
Output: 4 x ASI
Connect type: RJ45
Format: 10/100 BaseT
Specification

Input bit rate range: 2~8Mbps(SD)
,12~20Mbps(HD)

Output bit rate range: 1~8Mbps(SD),6~20Mbps(HD)

Maximum Compressing Rate:50%(Recommend 40%)

Audio Transparent Transmission

Support maximum 30 SD programs / 6 HD programs

Support setting program priority

Statistic multiplexing output: 4×TS(MPTS) with MPEG-2
standard
C302MH
ATSC M/H Statistic
Multiplexing Card

Support CBR/VBR

Support ASI, IP, DS3 etc rear panel input

Support D1, 3/4D1 and HD1 resolution

Support minimum/maximum bit rate setting
2 outputs for ASI or
SMPTE310 protocol and
Gbe Input&output by two
independent connector
Output : 2 x ASI/ SMPTE310
Control via front panel or
10/100Base-T
Ethernet
interface
C409
Receiving ATM signal and
output ATM signal
ATM Adapter Card
Input: 1×BNC, ATM
interface
Output: 1×BNC, ATM
interface





Input port support 2 input streams
Output port support 2 output streams
Support SDH and SONET
Get ATM signal from input and output by other card
Get TS from EMR main board and output ATM signal
22
C416
DS3/E3 Card
2 channels DS3/E3
with 1 channel ASI outputs
and 1 channel DS3/E3 with
1 channel ASI Input
1×DS3/E3 input
1×ASI input,
1×ASI output
2×DS3/E3 outputs

Maximum input bit rate of DS3 up to 44.736Mbps

Maximum input bit rate of E3 up to 34.368Mbps

Support SPTS/MPTS

Support ASIDS3/E3 bi-directional adapting

Protocol compatible for DIVICOM、TANDBERG、BARCO
PHILIPS、THOMSON、SCOPUS、Harmonic、Huawei、
ZTE
Support PCR correction

C451(EMR2.1)
1 channel gigabit IP input
and output with UDP
encapusulation
GbE IP Card
Scrambling (option)

1×10/100BASE-T Ethernet port for scrambling, RJ-45
Signal Processing over IP

Input & Output:
either 1×GBE (SFP) or
1×GBE (100/1000 Base-T)





C653/C653C
(EMR2.1)
Dual-Channel GbE IP
Card
IP receiving and sending,
2SFP can work in main and
backup mode
Input&output:
2×1000 BASE-X SFP
Other ports:
CA:1×10/100BASE-T
Ethernet port, for scrambling
(valid when C471S is in use)
Total processing capability: 960Mbps
Support 16 different TS streams input and 12 different TS
streams output
Packet length: 188 or 204 byte
Support bit rate setting for each output
UDP
protocol,
support
SPTS
and
MPTS,
unicast/multicast
Support IP address and port number setting for each
output
Signal Processing over IP







2 SFP can be configured independently
Total processing capability of each SFP: 960Mbps
Support 16 different TS input and 12 different TS output
Packet length: 188 or 204 byte
Support bit rate setting for each output
UDP protocol,support SPTS and MPTS,
unicast/multicast
Support IP address and port number setting for each
output
ETHERNET:1×10/100BASE-T
Ethernet port, for main control
(Valid only in C653C)
C302SI
EPG processing card
Support xml format, Produce offline xml file format conversion software, unify different
formats of xml (txt)

Program amount: 1024

File storage: 40M

Information description support:

short-event:Support up to 128 characters

extended-event: Support up to 1024 characters

Update method:
Manually update
Regularly updated: There are options of update everyday and update every Friday, this term
can be expanded to custom mode

Time zone control: Automatically adjust(Cooperate with TDT/TOT)

23
Switch Modules
Product
CA05
Description
2 RF Inputs and 1 RF Output
with 1 ASI output
RF Switch Card
Input: 2 x RF
Specification

Switch from 2×RF to 1×RF and 1×ASI (same)

Support program priority setting

Automatic/manual

Switch time: 125ms
Output: 1 x ASI, 1 x RF
CA01B (EMR2.1)
3 channels ASI inputs and 2
channels ASI outputs
ASI Switch Card

Switch from 3×ASI to 2×ASI

Automatic/manual

Switch time: 125ms

Support multicast receiver and VLAN

3 Ethernet ports can receive IP data, select the appropriate
Input: 3 x ASI
Output: 2 x ASI
CA04
IP Switch Card
3 RJ45 GBE Ports
1 RJ45 100M Control Port
output
Input: 3 x
to
the
network
port
monitoring
information.
RJ45
Output: 3 x RJ45
according

Support
power cut off direct function

Supports MAC address self-learning function
24
Typical Applications
IRDs based on EMR
6×4 CH QPSK Input Card
Details: This application can receive 24 QPSK FTA streams (DVB-S/S2)
from satellites as well as GbE IP, and output in one GbE IP after remultiplexing.
Input: 24×QPSK (DVB-S/S2), GbE IP
Output: GbE IP
Multi-Enc & Transcoding based on EMR
6×MPEG-2 Analog SD Encoding Card(12ch MPEG2
SD CVBS)
Details: This application can encode 12×CVBS signals to MPEG-2 streams and output GbE IP after remultiplexing.
Input: 12×CVBS, 10×balanced stereo, GbE IP
Output: GbE IP
6×MPEG-2 Digital SD Encoding Card(12ch MPEG2 SD SDI)
Details: This application can encode 12×SDI signals to MPEG-2 streams and output GbE IP after remultiplexing.
Input: 12×SDI, 12×balanced stereo, GbE IP
Output: GbE IP
6×H.264 Digital SD/HD Encoding Card(12ch H.264 SD/HD SDI)
25
Details: This application can encode 12×SDI signals to H264 streams and output GbE IP after remultiplexing.
Input: 12×SDI, 12×balanced stereo, GbE IP
Output: GbE IP
6×H.264 Analog SD Encoding Card (12ch H.264 SD CVBS)
Details: This application can encode 12×CVBS signals to H264 streams and output GbE IP after remultiplexing.
Input: 12×CVBS 12×balanced stereo, GbE IP
Output: GbE IP
6x MPEG2/H.264 SD/HD Encoding Card (30ch MPEG2/H.264 SD SDI)
Details: This application can encode 30×SDI signals to MPEG2/H.264 streams and output GbE IP after remultiplexing.
Input: 30×SDI
Output: GbE IP
4:2:2 Contribution based on EMR
1x H264 Low delay HD 4:2:2 Encoding card+5x audio Encoding cards(1ch H.264 4:2:2 video&24 audio)
Details: This application can encode 1 H.264 HD 4:2:2 program with 24 digital audio and output GbE IP after remultiplexing.
Input: 24 digital audio , 1 HD-SDI / HDMI
Output: GbE IP
26
Multi-interface transmission
Details: This application can encode 1 H.264 HD 4:2:2 program and support DS3 adaptation with up to 7 ASI inputs.
Simultaneously support modulated followed by DVB-T/S/S2 and output GbE IP after remultiplexing.
Input: ASI , SDI, Expand port, GBE IP, DS3
Output: GbE IP, DVB-T/S/S2 Modulation, DS3, ASI
Multi-interface receiving
Details: This application can decode 1 MPEG2/H.264 HD 4:2:2 program and support DS3 adaptation with up to 5 ASI inputs.
Simultaneously support demodulated 4 streams followed by DVB-T/T2 and 1 stream received followed by DVB-S/S2
with descrambling module and output GbE IP after remultiplexing.
Input: ASI , RF, GBE IP, DS3
Output: GbE IP, CVBS, YPbPr, DS3, ASI
6x MPEG2/H.264 SD Decoding Card (12ch MPEG2/H.264 DEC)
Details: This application can Decode 12×SDI signals to MPEG2/H264 streams
Input: GbE IP
Output: 12×SDI 12×AES/EBU
Bulk Descrambling based on EMR
6x Descrambling cards (96ch Descrambling)
Details: This application can descramble up to 96ch of 12 scrambled streams
Input: GbE IP
27
Output: GbE IP
Bulk Receiving based on EMR
6x DVB-S/S2 satellite receiving cards(24 DVB-S/S2 satellite streams receiving)
Details: This application can receive up to 24 satellite streams
Input: RF
Output: GbE IP
6x DVB-T/T2 Demodulation cards (24 DVB-T/T2 Streams receiving)
Details: This application can receive up to 24 DVB-T/T2 streams
Input: RF
Output: GbE IP
6x QAM Descrambling cards (6ch QAM signals receiving with descrambling module)
Details: This application can receive up to 6 QAM streams with descrambling
Input: RF
Output: GbE IP
HITS based on EMR
4x DVB-S/S2 satellite receiving cards + 2x 6 frequencies QAM output cards(16ch HITS)
Details: This application can receive up to 16 satellite streams and 24-frequencies QAM modulation outputs
Input: RF
Output: GbE IP, RF
28
ASI-IP Gateway based on EMR
6x ASI input/output cards (30ch ASI-IP Gateway)
Details: This application can receive up to 30 ASI inputs of 30 ASI outputs signals by GBE IP In/out
Input: ASI , GbE IP
Output: GbE IP, ASI
DSNG based on EMR
Details: This application can demodulate 4 DVB-T/T2 streams and encode 1 H264 HD 4:2:2 low delay encoding program and
up to 5 ASI inputs of 5 ASI outputs signals which be modulated by DVB-S/S2 modulating module.
Input: ASI , GbE IP,RF,HD-SDI
Output: GbE IP, ASI, RF
Head-end based on EMR
4x DVB-T Modulation cards with 2x QAM descrambling cards(Hotel Headend)
Details: This application can modulate 4 DVB-T streams by the 2 QAM streams with descrambling module
Input: GbE IP, RF
Output: GbE IP, RF
4xQAM Modulation cards+ASI input&output card + EPG card (500-1000 ch Headend)
29
Details: This application can modulate 4 QAM streams by the 5 ASI I/O signals with EPG generating module
Input: GbE IP, ASI
Output: GbE IP, RF
ATSC-M/H based on EMR2.1
Details: This application can encoding one MPEG2 program and mux programs from other ASI interface, then output by M/H
module
Input: GbE IP, ASI, CVBS, HDSDI
Output: GbE IP, ASI
Decoders based on EMR
DS3/E3 Input MPEG-2 Digital SD Decoders
5×MPEG-2 Digital Decoding Card +1×DS3/E3 Card
Details: This application can decode MPEG-2/H.264 streams from 1×DS3/E3/ASI /GEB IP to 10×HDSDI.
Input: 1×DS3/E3, 1×ASI, GbE IP
Output: 10×HDSDI, 1×ASI, 1×DS3/E3,GBE IP
Gateway based on EMR
ASI<-->IP gateway
4×5 ASI Input Card+2×4 ASI Output Cards
Details: This application can realize 20 ASI to GBE IP and IP to 10 ASI gateways.
Input: 1×IP, 20×ASI, GBE IP
Output: 10×ASI, GBE IP
30
Transmodulators based on EMR
4×QPSK Card+2×QAM Card
Details: This application can transmodulate streams from 16×QPSK to 12×QAM after remultiplexing.
Input: 16×QPSK, GBE IP
Output: 12×QAM, GBE IP
Transcoder based on EMR
6×MPEG-2 HD to H.264 HD transcoding Card
Details: This application can transcode from 12×MPEG-2 to H.264 (HD).
Input: SDI,GBE IP
Output: GBE IP
31
Sumavision Technologies CO., LTD.
Sumavision Plaza,
No.15, KaiTuo Road,
Shangdi Information and Industry Base,
Haidian District,
Beijing, 100085,
CHINA
Tel: 86-10-82345859/69/70
Fax:
86-10-62978800
http://www.sumavision.com
Copyright © 2014 by SUMAVISION Technologies CO., Ltd. All rights reserved. SUMAVISION maintains the policy of product improvement and reserves
the right to modify the specifications without prior notice.
32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising