Viewsonic VMP52
VMP52
Digital Media Player
- User Guide
- Guide de l’utilisateur
- Guía del usuario
- Bedienungsanleitung
- Pyководство пользователя
- 使用手冊
Model No.: VS12840
Compliance Information
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or
accumulators as unsorted municipal waste, but use the return and collection systems available.
If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or
Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002%
Cadmium, or more than 0.004% Lead.
ViewSonic
VMP52
Important Safety Instructions
1.
Do not use the equipment near water.
2.
Wipe the machine with a soft and dry cloth.
3.Do not block any vent holes. Please install the product in accordance with the manufacturer’s instructions.
4.Do not use the product on your legs for a long time because it gets hot and you may be burned.
5.Please avoid installing the product in a place where the temperature is above 40°C or lower than 0°C, or in a place
that is moist or wet.
6.Protect the power cord plug, outlet, and connections to other equipment from damage by trapping and squeezing.
7.
Please only use devices and accessories specified by the manufacturer.
8.The unit is hot pluggable. However it is recommended that the power be turned off before the memory card is
inserted or removed.
9.Do not remove the memory card during data access. The data may be lost and the product could be damaged.
10.
Disconnect the power cord if the product will not be used for an extended period.
11.
Do not repair, disassemble, or modify the product. Only qualified ViewSonic personnel should check and repair
any damage to the machine.
12.
The unauthorized playing of certain audio or image files may infringe the related copyright laws under certain
circumstances.
13.Do not adjust the volume to a high level, or the sounds may distort and become unpleasant.
14.When you view pictures for an extended period of time your eyes may become fatigued.
15.
Careful attention should always be paid when moving the digital media player.
16.
Make sure the place where the digital media player is placed is clean and dry.
17.If there is smoke, a strange smell or an abnormal noise, immediately turn off the digital media player and contact
your dealer or ViewSonic.
ViewSonic
ii
VMP52
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament
and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS
Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Proposed Maximum Concentration
Actual Concentration
Lead (Pb)
Substance
0.1%
< 0.1%
Mercury (Hg)
0.1%
< 0.1%
Cadmium (Cd)
0.01%
< 0.01%
Hexavalent Chromium (Cr6+)
0.1%
< 0.1%
Polybrominated biphenyls (PBB)
0.1%
< 0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
< 0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the
Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g.
piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by
weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic
iii
VMP52
Copyright Information
Copyright© ViewSonic Corporation, 2009. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product
specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written
permission from ViewSonic Corporation.
For Your Records
Product Name:
VMP52
ViewSonic Digital Media Player
Model Number:
VS12840
Document Number:
VMP52-P-UK-E_UG_ENG Rev. 1A 07-15-09
Serial Number:
___________________________________
Purchase Date:
___________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its
useful life. Your local waste disposal company may provide information about proper disposal.
ViewSonic
iv
VMP52
Table of Contents
Simple Operation....................................................................................................2
Please undergoing the below operation before using the product...................4
End-user License Agreement................................................................................7
Precautions.............................................................................................................7
Functional Description.......................................................................................... 9
Packing List...........................................................................................................10
Connection of signal and Memory Devices........................................................10
Player Setup..........................................................................................................11
Playing Operations...............................................................................................13
1) Photo playing.................................................................................................13
2) Music playing.................................................................................................14
3) Movie playing.................................................................................................15
4) E-book playing...............................................................................................16
Specifications........................................................................................................17
Appendix................................................................................................................18
Customer Support................................................................................................19
ViewSonic
VMP52
Simple Operation
Front pannel
Rear pannel
Note: When player is power on, standby indicator turns to green. When the player is in standby, the indicator
turns to red.
ViewSonic
VMP52
Schematic Diagram of Remote Control
1
11
2
12
13
14
15
16
17
18
19
3
4
5
6
20
21
7
22
23
24
8
9
10
ViewSonic
25
26
27
28
29
VMP52
Please undergoing the below operation before using the product
1. C
onnect HDMI cable or component cable,
audio cable and power cord.
2. Insert USB device or memory card with
media files.
3. Select the TVs HDMI input and power up the
media player, after a few seconds the media
player menu will be displayed.
ViewSonic
VMP52
Instruction to install the built-in SATA(2.5’) HDD
1. R
emove four hex screws from the rear (connector panel) using the supplied tool.
2. Slide out the rear cover, complete with circuit board. It may be
necessary to push gently from the front by removing the front
cover via four hex screws.
3. Place the SATA(2.5’) HDD closely at the back of circuit board,
then insert it into the SATA matching slot.
4. Tighten the screws on the SATA(2.5) HDD with the supplied
tool.
5. Slide the circuit board along with the board slot into the main
case, then tighten the screws on the main case.
ViewSonic
Note:
1) Please format the SATA(2.5’) HDD before fitting it into
the player.
2) Make sure not to damage embedded components on the
circuit board.
3) After successful installation, enter setup menu, and
choose “SATA” in device selection, for detailed instruction
please refer to Page 11.
VMP52
Three input HDMI switcher
1) Possible connections and devices depicted below:
2) Turn on TV set and the connected HDMI device.
3) P
ress SOURCE key in the remote control, the display will show “HDMI1, HDMI2, HDMI3, exit”, press
▲/▼ key to select HDMI source, and press ENTER key to confirm.
ViewSonic
VMP52
End-user License Agreement
Please read this agreement carefully before using the product:
Please ensure:
1) Do not dismantle the product for improper purposes.
2) Unauthorized access to hardware or software will result in a voided warranty.
How to use this User Manual:
Please read the User Manual carefully before using the product. Our company is not liable for any direct
or indirect losses arising from hardware damage, program damage, file loss and system breakdown due
to improper operations.
Precautions
Dear customer, thank you for buying our product. We sincerely hope that our product will bring pleasure
and happiness to you. Please carefully read and pay special attention to the following before using the
product:
● Do not expose the product to rains or damp environments to prevent fire or electric shock.
● Do not expose the product to rains, moisture, dripping or splashing to reduce the danger of fire,
electric shock or product damage.
ViewSonic
VMP52
Safety Instructions
1) Do not place the power cord and plug of the adapter near heat sources.
2) Do not place any weight on the power cord and plug of the adapter.
3) Do not dismantle and repair the adapter and its power cord.
4) Do not open the enclosure of the product to ensure your safety. Please ask service-trained professionals to conduct maintenance if necessary.
Maintenance Tips
1) Do not dismantle components of the product on your own. The warranty mark will beinvalidated
automatically if you dismantle and repair the product on your own.
2) Please contact our local warranty department to arrange maintenance properly if necessary.
3) To replace devices or accessories, please select the original ones designated by the manufacturer.
ViewSonic
VMP52
Functional Description
● HDMI digital interface with 720P/1080P(1920*1080) resolution.
● HDMI1.3 with 480p/720p/1080p video output. Component output supports 480p/720p/1080p.
● Unique design with three input HDMI switcher to reduce the number of cables routed to your display.
● Innovative built-in SATA(2.5’)HDD slot.
● Support H.264, MPEG1/2/4, DIVX, XVID etc. true HD formats.
● Support HD Video formats such as TS, MKV, RM/RMVB, TP, AVI, VOB, DAT, MPG, MPEG, MOV etc.
● First Media Player worldwide supporting 720Presolution HDMI slot for RM/RMVB formats. Fully
support RM8/RM9/RM10 formats.
● Surport Audio formats such as BTSC/A2/EIA-J, MPEG-1, MPEG-2(Layer I/II), AAC, HE-AAC.
● Read *.TXT with background music. Support E-book reading.
● Selectable colour temperature modes.
● Selectable audio modes
● Selectable video modes
● Support multi-subtitles and multi-audio tracks.
● Full function remote control.
● Support SD/MMC/MS cards. USB 2.0 Host.
● Coaxial audio output.
● 12V/1.2A power supply for stable performance.
● OSD Language: English/Traditional Chinese/French/German/Italian/Spanish/Polish/Russian
ViewSonic
VMP52
Packing List
Main unit....................................... 1 SET
Remote control............................. 1 PCS
COAXIAL cable............................ 1 PCS
Screw........................................... 4 PCS
QSG.............................................1 PCS
Adapter.........................................1 PCS
Hexagon tool................................ 1 PCS
In case of missing items, please feel free to contact your dealer without delay.
Connection of Signal and Memory Devices
1) Connecting Display Device
a) Method 1: Connection with component cable. Connect the Y(green), Pb(blue), Pr(red)
component video output signal of the player to the corresponding input interfaces of the display
device(e.g., TV component input jack), and connect the A/V cable to the display device.
b) Method 2: Connect display with HDMI.
c) Method 3: If you have several devices with HDMI output, such as DVD, PC etc, you can connect
them with this media player via the HDMI slot in the real panel and output to the desired display.
Note: Factory default video output is YPbPr 720P.
ViewSonic
10
VMP52
2) Connection to Memory Devices
a) The player has USB HOST interface, which can be used for connecting USB memory sticks,
external HDD and other USB memory devices.
b) The player has a 3 in l card slot compatible with SD/MMC/MS cards.
c) AMini USB connector allows connection to a computer for transferring media to the integrated
HDD, if installed. (Note: Make sure the media player is powered on before connecting PC with
USB cable) .
Player Setup
After connecting as described previously, turn on the player, then
it will start initialization (the green indicator will be illuminated),
and the screen will display “Loading…”. After the completion of
initialization, the main menu page will display, including photo,
music, movie, text and setting icons. Press ◄/► key of RC to
select “Setting” icon, then it will show as below picture:
In this page, press ENTER key to confirm, and press UP/DOWN
key to select icon, and press ◄/► key to adjust data.
The parameter setup includes the following items:
● Language: Select OSD 8 languages (English/Traditional Chinese/French/German/Italian/Spanish/
Polish/Russian)
ViewSonic
11
VMP52
● Repeat: Set the repeat modes. There are Repeat All/ None/Select for options.
● Slideshow speed: Set the picture slideshow refresh speed, There are Medium/Slow/Fast for options.
● Movie screen: Set movie aspect ratio, Full screen/Normal ratio for option.
● Setting: 1080P or 720P .
● Device selection: Choose the built-in SATA(2.5’) HDD or external USB device.
Note: when connecting with PC, the player default to SATA HDD mode
● Restore Factory Default: Factory Default .
ViewSonic
12
VMP52
Playing Operations
1) Photo playing
Correctly insert memory device, In the main menu page, press ◄/► key to select “Photo” icon, then
all the file names in this folder will be listed, press ENTER key to enter folder and press UP/DOWN key
and ENTER key to select desired file to play. Picture profile will be shown on the right of the screen, and
preview starts in thumbnail window.
A. In the photo content page, you can
● Press UP/DOWN key to select “Up Folder”, and press ENTER key to return to the previous menu page.
● Press
/
key to turn to previous or next page .
● Press UP/DOWN key to move the cursor to select desired picture.
● Press
key to play single picture in full screen, and slideshow will start.
● Press MENU key to return to main menu page.
● Press SELECT key to select repeat playing function:  when the cursor moves to the folder name.
Press ENTER key, it will pop up “select all” or “unselect”. Press ◄/► key to select, and Press ENTER key to confirm;  if the cursor moves to the file, press SELECT key to tick, player will repeat
play the ticked file until the tick is canceled.
B. In the full-screen picture display status, you can
● Press MENU key or ■ key to return to the files content page.
● Press
key to pause slideshow, and display single picture. Press again to restart.
● Press
/
key to play previous/next picture.
● Press INFO key, the relevant information of the picture will be shown on the screen.
ViewSonic
13
VMP52
2) Music playing
In main menu, press ◄/► key to select “Music” icon, then press UP/DOWN key to choose folder. All the
available folder names will be listed. Press ENTER key to enter the desired folder. Press UP/DOWN key
and ENTER key to choose desired file. Audio file profile will appear in bottom right of display and preview
starts in thumbnail window. Press ENTER key to enter playing page. ID3 info, process bar, time and
frequency spectrum will appear in bottom right of display. Songs contents are displayed on the left.
A. In music file content page, you can:
● Press UP/DOWN key to select “Up Folder”, and press ENTER key to return to the previous menu
page.
● Press UP/DOWN key to move cursor, to select desired song by SELECT key.
● Press
/
key for previous/next page.
● Press ENTER key to enter music playing mode.
● Press MENU key to return to main menu.
● Press
key to play music and enter music playing mode.
B. In music playing mode, you can:
● Press MENU key or ■ key to return to file content page.
● Press MUTE key to mute the sound. Press again to resume.
● Press Play/Pause key to play or pause music.
● Press VOL+/- key to adjust volume.
● Press UP/DOWN key to move cursor, press SELECT key to play selected song.
● Press
/
key to select previous or next song.
/
key for fast backward and fast forward. 2x/4x/8x/16x are available.
● Press
ViewSonic
14
VMP52
3) Movie playing
In main menu page, press ◄/► key to select “Movie” icon, then press UP/DOWN key to select folder. All
the folder names will be listed. Press ENTER key to enter the desired folder. Press UP/ DOWN key and
ENTER key to select desired file. Video file profile will appear in right of display and preview starts in
right thumbnail window.
A. In movie file content page, you can:
● Press UP/DOWN key Select “Up Folder”, and press ENTER key to return to the previous menu page.
● Press UP/DOWN key to move cursor to select desired movie by select key.
● Press
/
key for previous/next page.
● Press ENTER key to enter movie playing page.
● Press
/
key for previous/next page.
● Press ENTER key to enter movie playing page.
● Press MENU key to return to main menu page.
● Press ENTER key to play movie.
B. In movie playing mode, you can:
● Press MENU key or ■ key to return to file content page.
● Press MUTE key to mute sound, press again to resume.
● Press VOL+/- key to adjust volume.
● Press
key to play or pause.
● Press INFO key to display video file profile.
● Press
/
key to select previous or next video file.
/
key for fast backward and fast forward. 2x/4x/8x/16x are available.
● Press
ViewSonic
15
VMP52
4) E-book playing
In main menu page, press ◄/► key to select “TEXT” icon. Then press UP/DOWN key and ENTER key to
enter desired one.
In E-book playing mode, you can:
● Press MENU key or ■ key to return to file content page .
/
key for previous or next text file.
● Press
● Press
/
key for page down.
ViewSonic
16
VMP52
Specifications
Stereo output: 2 connector
Interface
Video
characteristics
Weight
Coaxial audio output: 1 connector
Component signal output : 3 connector
HDMI output: 1 connector;
HDMI input:3 connector
VIDEO 1.0Vp-p (75Ω load)
Y: 1.0Vp-p
PB/PR: 0.7Vp-p
about 860g
Audio
characteristics
Audio output level (V):
2.00+0.0/-1.0
Audio SNR (dB) ≥85
Power voltage
12V
Power
consumption
≤10W
Dimensions
195x126x45mm
* A simple file folder system will greatly accelerate the response speed of the system. More complicated
file folders will bring extra load to the system, and affect the processing speed of the system. A single
file folder system is recommended.
* Try to use English and Chinese character for the folder name. Characters no more than 10.
* When the system is busy in processing your previous operation, please do not press keys excessively
frequently; otherwise, the processing speed of the system will be adversely affected.
* If any fault occurs due to misoperation, please restart and the system will re-initialise.
Note 1: Due to continuous development of the system, the actual display and operation may
differ from the operating instructions.
Note2: The design and specifications of the product are subject to change without prior notice.
ViewSonic
17
VMP52
Appendix
Support media format
Function Module
Movie
Music
Photo
Subtitle
Movie File Format
Text
Container
Resolution / Max specification
.avi
.vob
.ts
.tp
.mov
.mkv
.dat
.mpg
MP3
WMA
JPEG
BMP
PNG
.SRT/.SSA
MPEG1
MPEG2
MPEG4
H.264
.txt
1080p/1080i/720p
480i/576i
1080p
1080P
1080p
1080P
480i
1080p
Sampling: 8k~48kHz
Bit rate: 32k~320KHz
6000x6000
.DAT/.MPG
.MPG
.Avi, Divx, Xvid
.MKV/.MOV
Video and Subtitle need same file name.
\
Up to 40Mbps
Up to 20Mbps
Up to 20Mbps
Note 1: Video does not support Divx3, Divx6, VC1,WMV,RV20 and MP42.
Note 2: Audio does not support Dolby HD, DTS, Sony ATRAC3
ViewSonic
18
VMP52
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
ViewSonic Corporation
World Headquarters
381 Brea Canyon Road
Walnut, CA 91789-0708
Tel: 909-444-8888
Fax: 909-468-1240
ViewSonic Latin America / Miami
8201 Peters Road, Suite 1000
Plantation, FL 33324
ViewSonic Canada
100 Mural Street, Suite 202
Richmond Hill, Ontario L4B 1J3
Canada
Tel: 905-709-9774
Fax: 905-709-0685
ViewSonic Belux
Teleport Towers
Kingsfordweg 151
1043 GR Amsterdam
Email: sales_be@viewsoniceurope.com
Tel: +31 (0)20 491 9254
FAX: +31 (0)20 491 9090
ViewSonic Poland
Email: Sales-pl@viewsoniceurope.com
Service and support:
Tel: + 48 61 879 89 93;
Email: info@arconet.pl
ViewSonic Norway
PO.box: Postboks 62 Bryn 0611 Oslo Norway
Email: sales_no@viewsoniceurope.com
Europe
ViewSonic United Kingdom
ViewSonic Europe Ltd.
Level 4, Tower 42,
25 Old Broad Street,
London, EC2N 1HQ
United Kingdom
Tel: +44 (0) 207 382 8250
Fax: +44 (0) 207 382 8251
ViewSonic Russia
Radio 24
Business Centre “Jauza Tower”
105005 Moscow
Russia
Email: For Information
Email: For Customer Care & Quality
Tel: +7 495 258 5670
Fax: +7 495 258 0625
ViewSonic Italy
Email: sales-it@viewsoniceurope.com
ViewSonic Ukraine
1,Dorohozhytska Str., office
1025-B, Kiev, 04119, Ukraine
Tel./fax: +380 44 537 48 47
ViewSonic
19
ViewSonic Finland
Lars Sonckin Kaari 12 02600 Espoo, Finland
Email: sales-fi@viewsoniceurope.com
TEL +358-(0)20 7120 861
FAX: +358-(0)20 7120 869
ViewSonic Spain & Portugal
Tel: +34 916305339
Email: sales_es@viewsoniceurope.com
ViewSonic France
5 rue du Helder
75009 Paris
France
Email: sales_fr@viewsoniceurope.com
Tel: +33(0)1 41474-900
Fax: +33(0)1 41474-910
ViewSonic Sweden
TEL +46(0)8 507 13000
FAX +46(0)8 626 20 30
SERVICE and SUPPORT:
Tel: +46 (0)8 579 290 45
Info-Mail: sales-se@viewsoniceurope.com
Bergkällavägen 32 P.O. Box 310
SE-19230 Sollentuna
ViewSonic Greece
43 Agias Lavras Str
P.Faliro
Athens 17563
Greece
Email: sales_nl@viewsoniceurope.com
Tel: +30210 9836281
Fax: +30210 9836281
VMP52
Viewsonic Portugal
Tel: +351 91 333 7738
Info-Mail: sales-pt@viewsoniceurope.com
ViewSonic Germany
ViewSonic Central Europe
Koenigstr. 10C 70173 Stuttgart
Email: sales_de@viewsoniceurope.com
Tel: +49 (0) 711 222 54 482
Fax: +49 (0) 711 222 54 200
Middle East
ViewSonic Middle East
LOB 13 Office 8
PO Box 17625
Jebel Ali
Dubai U.A.E.
Tel: 971 4 8811871
Fax: 971 4 8811969
Asia/Pacific
ViewSonic Taipei
Head Office
9F, No. 192, Lien Chen Road
Chung Ho 235 Taipei
Taiwan
Tel: 011-886-2-2246-3456 (operator)
Fax: 011-886-2-8242-3666 (9th fl. / exec. office)
ViewSonic Singapore
221 Henderson Road
#04-08 Henderson Building
Singapore 159557
Tel: 011-65-6273-4018
Fax: 011-65-6273-1566
ViewSonic
ViewSonic Korea Office
#2110, 21F, Renaissance Tower Bldg.
Gongdeok 2-dong
Mapo-gu, Seoul, 121-706
Korea
Tel: 82-2-798-2132
Fax: 82-2-798-2136
ViewSonic Guangzhou
Room 1305, Renfeng Tower, No. 490 Tianhe Rd,
Tianhe Dist., Guangzhou PRC
510630
Tel: 86-20-3878-1858
Fax: 86-20-3878-1766
ViewSonic India Pvt Ltd.
M-28, Commercial Complex (M-Block Market)
3rd floor, Greater Kailash-II
N Delhi - 110 048
India
Tel: 91-11-4053-6556
Fax: 91-11-4053-6557
ViewSonic Beijing
Room 902, 9F Union Plaza
No. 20, Chao Wai Ave
Chaoyang Dist.
Beijing PRC
100020
Tel: 86-10-6588-5301
Fax: 86-10-6588-4288
ViewSonic Thailand [Rep. Office]
246 Time Square Building,
12-02, Room no. 1550B,
Sukhumvit Rd.
Klong Tuery, Bangkok 10110
Thailand
Tel: +662 253 7189
ViewSonic Hong Kong
Unit 3, 15/F, Greenfield Tower,
Concordia Plaza, 1 Science Museum Road,
TST East Kowloon, Hong Kong
Tel: (852) 3690 1398
Fax: (852) 3690 1399
China
ViewSonic China Head Office (Shanghai)
Room 3608, 36F United Plaza
No. 1468 Nan Jing
Shanghai
20040
Tel: 86-21-6237-5252
Fax: 86-21-6237-5373
or 86-21-6237-5590
20
Australia
ViewSonic Australia Pty. Ltd.
Unit 4, 44 Dickson Ave, Artarmon
NSW 2064, Australia
Tel: 61-2-9906-6277
Fax: 61-2-9906-6377
VMP52
Limited Warranty
ViewSonic Digital Media Player
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,
ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts
may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Media Player are warranted for 1 year for labor from the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Causes external to the product, such as electric power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f.Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is
displayed on the product for an extended period of time.
ViewSonic
21
VMP52
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer
to Customer Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c)
your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or
ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the
implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss
of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference
with business relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4.3: ViewSonic DMP Warranty
ViewSonic
DMP_LW01 Rev. 1A 06-04-08
22
VMP52
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising