FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module

FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module
DATASHEET
FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module
FE-4S – 4 Port 10/100 BaseT Fast
Ethernet Module
The FE-4S module is designed to transport
up to four 10/100 BaseT Fast Ethernet
channels across an MD8000 network.
KEY FUNCTIONS:
• External interface to 10/100 BaseT user
circuits
• Electrical Interface, RJ-45 connector
• Transparent data transmission with
robust FEC
• Hitless Path Failure Protection
The FE-4S module is designed to transport up to four 10/100 BaseT
Fast Ethernet channels across an MD8000 network. Each of these
four channels operates at full wire speed rates and is completely
independent and bi-directional, ensuring that data on each of the
individual ports is kept separate.
As with all other MD8000 line cards, data traffic sent into this card are
encapsulated into Ethernet frames and transferred to the MD8000
Switch Controller (SW-CNT) modules. Received data traffic in the reverse
direction is sent by the SW-CNT, accepted at the FE-4S module, and
output as 1-4 unique 10/100 BaseT output signals. For improved transport
resiliency and reliability, Forward Error Correction (FEC) and hitless
switching options may be used with this line module.
All four ports support Full-Duplex and Auto-Negotiation. Bandwidth
for individual ports can be provisioned at the following rates: 1Mbps,
2.5Mbps, 5Mbps, 10Mbps, 20Mbps, 30Mbps, 40Mbps, 50Mbps,
75Mbps and 100Mbps. The front panel of the FE-4S module features
a comprehensive set of LEDs for monitoring the status and health of
incoming and outgoing channels. Using SNMP, the module is also fully
manageable by Media Links’ NMS systems.
KEY FEATURES:
• 4 fully Independent Ethernet Circuits
• UTP CAT5 Interface
• Automatic Rate Negotiation
Port 1
10Mb/100Mb
APPLICATIONS:
•
•
•
•
LAN Extension
WAN Access Circuit
Network Management and Telemetry
File Transfer
Port 2
10Mb/100Mb
Port 3
10Mb/100Mb
Port 4
10Mb/100Mb
Backplane Interface
Ether
Phy
Ether
Phy
Ether
Phy
Ether
Phy
RS Encoder
Mux
RS Encoder
IP
Encapsulation
RS Encoder
Mux
RS Encoder
RS Decoder
RS Decoder
RS Decoder
RS Decoder
Hitless
Switch
IP
Decapsulation
Demux
IP
Decapsulation
Demux
Format
to
10 Gb/s
De-Format
from
10 Gb/s
Front
LEDs
MD8000 - FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module Block Diagram
East
SW-CNT
West
SW-CNT
East
SW-CNT
West
SW-CNT
DATASHEET
NAME
Port 1-4
TYPE
RJ45
DESCRIPTION
Ethernet In/Out Ports
10BASE-T/100BASE-TX Auto
Negotiation
Rear Board Connectors
NAME
CONDITION TO ILLUMINATE
IN-SRV
Status Monitored
MAINTE
Under Maintenance
ACT
Normal Operation
ERR
Board Failure Detected
POWER
Board Power Voltage Low (Warning)
TEMP
Board Temperature High (Warning)
TEMP
Link is established
100M/10M
Linked at 10Mbps
PKT-L1/2
Input stream of the selected channel
1: Packet input from Line 1
2: Packet input from Line 2
LINE1/2
SWCNT for the selected channel
1: SWCNT #1; 2: SWCNT #2
RS-F/E
RS-F: Uncorrectable Error Detected
RS-E: Correctable Error Detected
Hit/Man
Hit: Hitless Switching mode
Man: Manual Switching mode
Hitless
Hitless Switching can be enabled
TX/RX
TX: Transmitting Frames
RX: Receiving Frames
BUF-ERR
Buffer Overlow
Front Panel LEDs
DATASHEET
FUNCTIONAL SPECIFICATIONS:
Ethernet
Encapsulation
Data Rate
10 Mbps / 100 Mbps
Access Method
CSMA / CD Full-Duplex
Frame Structure
iEEE 802.3ab
Transmission Method
Transmission Code
10BASE-T
Transmission Method = Baseband
Transmission Code = Manchester
100BASE-TX
Transmission Method = Baseband
Transmission Code = 4B/5B+MTL-3
Transmission Media
10BASE-T
UTP CAT3 or higher
100BASE-TX
UTP CAT5 or higher
Maximum Cable Length
100 m
Network Protocol
IP v4
Packet Size
1500 Bytes (including the IP Header)
ORDERING INFORMATION
MODEL
ORDER NUMBER
4 Port 10/100BT Fast Ethernet Module (4 duplex service)
Media Global Links
Kawasaki Tech Center 18F
580-16 Horikawa-cho,
Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0013 Japan
Phone: +81 44-589-3440
query@medialinks.co.jp
Media Links, Inc.
431-C Hayden Station Road
Windsor, CT 06095
USA
Phone: +1 860-206-9163
Fax: +1 860-206-9165
info@medialinks.com
DATASHEET-MD8000-FE-4S-08-2016
MD801008
Media Links Australia
2-12 Rokeby Street,
Collingwood, VIC 3066,
Australia
Phone: +61 3-9017-0175
Fax: +61 3-8456-6339
info@medialinksaustralia.com.au
ORDER CODE
FE-4Sch-F
Media Links EMEA
Thremhall Park
Start Hill, Bishop’s Stortford,
Herts CM22 7WE
United Kingdom
Phone: +44(0)1279 874371
emea_info@medialinks.com
www.medialinks.com
© 2016 Media Global Links. All rights reserved. Specifications subject to change without notice.
Media Links and Media Defined Networking are trademarks of Media Global Links.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising