advertisement
Model 53U Multi Power Monitor
■
Single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems
■
Three line measured value/bargraph indicators plus energy count/info display
■
Modbus, Ao, Di/Do options
■
Up to 31st harmonic distortion measurement
■
Software lock
■
IP 50 front panel
M-System model 53U is a 96-mm-square Multi LCD
Power Monitor mounted on a panel surface.
One model can be used for single-phase/2-wire and
3-wire, three-phase/3-wire and 4-wire systems. Users can freely choose and program major variables such like
AC voltage/current, active/reactive power, power factor,
AC frequency deviation, apparent power, active/reactive energy and up-to-the-31st harmonic distortions.
Measured variables also include the maximum/minimum/ average values, in total of 500 types. Up to 1800 patterns of display combinations are available.
All measured variables can be transmitted to the host PC via RS-485/Modbus RTU. Conversion factors, system confi guration, interval times are programmable using the
PC Confi gurator Software locally or remotely. Measured values, counter values, setting data are stored in the non-volatile memory at the power off.
An open collector output can be used for energy count pulse or limit alarm trip. Pulse rate for energy count can be specifi ed. The contact output can be simulated for testing the connected device.
External open collector input is typically used to reset energy count memory. The signal can be also monitored at the host system via Modbus, so that the host can start/ stop monitoring according to ON/OFF status of a load
(e.g. motor running or not).
Four analog output option (4-20 mA or 1-5 V) is also available instead of Modbus and Di/Do interface. Users can choose and program four among major variables, e.g. 1 VT plus 3 CT, to be converted into analog outputs, thus eliminating needs for four independent single function transducers.
For M-System product information and downloadable data sheets, visit M-System web site at: www.m-system.
co.jp.
User-Friendly PC Software Setting
Save yourself much time using the free PC Confi gurator software
(model: PMCFG) to create, save and download your own parameter settings.
Local (RS-232C) or
Network (Modbus RTU)
Multi Power Monitor
53U
Monitoring and Storing
Measured/Computed Values on the PC
The PC Recorder Light
MSR128LU dedicated for the
53U / L53U is free for downloading from our web site.
Modbus RS-485
Monitoring window for real-time, instantaneous values, max/min values, energy and harmonic distortions
Confi guration window for quick and easy viewing/setting of basic parameters
Multi Power Monitor 53U
RS-232C/
RS-485 Converter
R2K-1
L53U
FRONT DISPLAY FUNCTIONS
500 types of measured variables;
1800 combinations
Bargraphs
Each measured variable is represented in percentage.
www.m-system.co.jp
Information display
Shows the energy count in normal conditions.
Variable type in alarm condition is displayed when an alarm is triggered.
Parameter type is displayed in the setting mode.
Normal mode : Energy count display
Alarm mode : Alarm trip display
Display flashes while the alarm is on.
Configuration mode : Parameter display
SPECIFICATIONS
■ MEASURED VARIABLES
Voltage: 1-N, 2-N, 3-N, 1-2, 2-3, 3-1
Current: 1, 2, 3, N
Average current: 1, 2, 3
Active/reactive/apparent power: 1, 2, 3, ∑
Power factor: 1, 2, 3, ∑
Frequency
Phase angle between voltages: 1-2, 2-3, 3-1
Active energy incoming/outgoing: ∑
Reactive energy inductive/capacitive: ∑
Apparent energy: ∑
Power intervals (demand) and other demands
Harmonic contents: 2nd to 31st
Max. and min. values
■ INPUT
Frequency: 50/60 Hz (45-65 Hz)
Voltage Input
Line-to-line (delta voltage): 480 V
Line-neutral (phase voltage): 277 V
Current Input: 1 A or 5 A
Contact Input: 24 Vdc or 110 Vdc
The status can be monitored on the Modbus; usable to reset energy count or to update average (demand) value.
Operating temp.: -10 to +55°C (14 to 131°F)
Storage temp.: -20 to +80°C (-4 to +176°F)
Operating humidity:
90% RH max. (non-condensing)
Mounting: 1/4 DIN panel fl ush mount
Degree of protection: IP 50 (front)
IP 30 (terminal block and housing)
Weight: 300 g (0.66 lb)
■ PERFORMANCE
Accuracy (in % of span)
Voltage/current: ±0.3% (Option /H: ±0.2 %)
Power: ±0.5%
Power factor: ±0.5%
Frequency: ±0.1%
Energy: ±1% (Option /H: ±0.5%)
Harmonic contents: ±1%
Analog output: Accuracy of assigned measurand or ±0.2 %,whichever is greater.
Response time: ≤2 sec. (0-99 %)
≤3 sec. for frequency/harmonic contents
Sampling time: ≤600 msec.
≤1.1 sec. for frequency/harmonic contents
Insulation resistance: ≥100 MΩ with 500 Vdc
EXTERNAL DIMENSIONS
unit: mm (inch)
96 (3.78) 23
(.91)
80 (3.15) [12 (.47)]
■ OUTPUT
• Modbus RTU
Communication:
Half-duplex, asynchronous, no procedure
Interface: Conforms to EIA RS-485
Max. transmission distance: 500 meters
Baud rate: 1.2-38.4 kbps
Max. number of slave nodes: 31
• DC Current: 4-20 mAdc
Load resistance: ≤270 Ω
• DC Voltage: 1-5 Vdc
Load resistance: ≥5000 Ω
• Open Collector: 130 Vdc @30 mA
Programmable for either alarm or energy count.
2 (.08)
Specifi cations are subject to change without notice.
Your local representative:
Dielectric strength: 4000 Vac @1 minute
(voltage input or current input or contact input or contact output or network interface or confi gurator jack or analog output to power)
2500 Vac @1 minute (voltage input to current input to contact input to contact output to network interface or confi gurator jack or analog output)
2000 Vac @1 minute (circuits to housing)
■
STANDARDS & APPROVALS
CE conformity:
EMC Directive (2004/108/EC)
EMI EN 61000-6-4: 2007
EMS EN 61000-6-2: 2005
Low Voltage Directive (2006/95/EC)
EN 61010-1: 2001
UL approval:
UL/C-UL general safety requirements
UL 61010-1: 2005
CAN/CSA-C22.2 No.61010-1: 2004
IEC standard: (applicable with Option /H)
IEC 62053-22: 2003 class 0.5s
IEC 62053-23: 2003 class 2
92 (3.62)
100 (3.94) dia.
GASKET MOUNTING BRACKET
■ INSTALLATION
Auxiliary power input:
100-240 Vac (operational range 85-264 V)
47-66 Hz, <8 VA
M-SYSTEM CO., LTD. — www.m-system.co.jp — [email protected] Product Bulletin 53U_UL_R0_130904
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project