System Check 1. Install Keil MDK-ARM v5

System Check 1. Install Keil MDK-ARM v5
System Check
Laptop Requirements
• A Windows® Laptop (Windows 7 or Windows 8)
• MacBook running Windows (Parallels, VM Fusion, etc)
• Note: Administrator rights are needed for software and driver installation.
1. Install Keil MDK-ARM v5
Download and install the Keil MDK-ARM professional tool suite:
http://www2.keil.com/stmicroelectronics-stm32/mdk
In the Pack Installer window, click the “Install” button to download the family packs for the STM32F0
and STM32L0 series
Activation steps: From your desktop, right click on Keil uVision5 and select “Run as Administrator”;
in File > License Management, Single-User License tab, click “Get LIC via Internet...” and fill out the
web form in your browser.
Product Serial Number (PSN): U1E21-CM9GY-L3G4L
Page 1 of 5
Once you receive the license by email, come back to the License screen and enter it in “New License
ID Code (LIC)” box and click “Add LIC” button to finish.
2. Install STM32CubeMX
Download STM32CubeMX installer from www.st.com/stm32cube

Locate the file in your download folder (or your default download location if different) and
unzip the fileSetupSTM32CubeMX-4.8.0.exe to your location of choice. Run the
STM32CubeMX installer (SetupSTM32CubeMX-4.9.0.exe)

Java Run Time Environment 1.7 (version 1.7_45 or newer) is required. STM32Cube Installer
will prompt user if Java download is required

To complete the STM32CubeMX install you will be prompted to restart your computer.
After successful installation you will see a shortcut to the STM32CubeMX on your Desktop
3. Proxy Server configuration
Launch the STM32CubeMx
 Click on “Help”
 Open on “Updater settings”
Page 2 of 5
•
Select the “Connection Parameters” tab
•
Configure your internet access
• Proxy Server Type
• No Proxy
• Use System Proxy Parameters
• Manual Configuration
•
Manual Configuration of proxy server
• Contact your IT administrator for proxy type, HTTP address, and Port.
•
Confirm Internet Connection
• Click on “Check Connection”
• Green CHECK Mark
Page 3 of 5
4. Install STM32Cube Library Package

Open “Install New Libraries”
Menu->Help -> Install New Libraries

“Check” the STM32F0 and L0 packages
Release notes are displayed at the bottom.

Click on “Install Now”
5. Install ST-Link Utility
The ST-Link Utility allows typical flash program / erase / upload / download functions via the STLINK/V2 debugger, onboard the Discovery Board & Nucleo Boards. It also installs the Windows
device drivers necessary for the ST-LINK/V2 debugger.
• Download ST-Link Utility application from, http://www.st.com/web/en/catalog/tools/PF258168.
Page 4 of 5

Run STM32 ST-LINK Utility_v3.7.0.exe installer
Page 5 of 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement