Digital Input/Output Modules

Digital Input/Output Modules
Digital Input/Output Modules
Digital Input/Output Modules
DIO248, DIO264, DIO280
The input/output module DIO2xx are used for
controlling digital consumer like contactors, relays,
pneumatic and hydraulic valves, as well as for
reading signals of digital working sensors, detectors
or switches. On events can be reacted expressly
via 8 available interrupt inputs. Alternatively there
are available up to four counters, for detecting e.g.
positions or counting goods. For the energy-saving
operation of inductivities all outputs can be operated
as PWM. Especially for the PWM operation of valves
a hold time is additionaly configurable between 0 up
to 2 s. Outputs are parallel connectable, in case it is
operated in the same operation mode.
•16/32/48/64 or 80 digital channels
•16 channels can be configured as input
or output
•Configurable interrupt inputs
•Configurable 32 bit counter
•Mode: event counter, incremental encoder,
gate measurement, cycle time or frequency
measurement
•Configurable input filter
•PWM output mode for e.g. valve economy mode
•Status display for each channel via LED
•Supply voltage 18 to 34 VDC
•Supply voltage protected against reverse polarity
•Cost effective and space saving
Item
DIO248
DIO264
DIO280
DIO280 CC
Item no.
00019116-00
00019115-00
00019114-00
00019119-00
34
System Overview • Bachmann electronic GmbH • 05/2017 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Digital Input/Output Modules
DIO248
DIO280
DIO280 CC
DIO264
Inputs
Quantity
16 to 32
24 to 40
Input voltage range (H)
Input voltage range (L)
0 to 5 VDC
Input delay (normally)
Standard: 600 µs
Settable 10 µs to 270 ms
Internal resistance
8 kOhm
Status indication (LED)
Interrupt inputs
32 to 48
15 to 34 VDC
Green
8, configurable as counter inputs or interrupt inputs
Counter
Quantity
up to 4
Resolution
Operating mode
Encoder types
Input signal
Signal evaluation
Max. input frequency
32 Bit
event counter, incremental encoder, gate measurement, cycle time or
frequency measurement
incremental encoder with A and B channel and one-channel pulse
encoder
A, B, Initator (interrupt inputs configurable)
1 / 2 / 4-fold edge evaluation or pulse direction mode
one-channel: 50 kHz
dual-channel (A/B): 20 kHz
Outputs
Quantity
16 to 32
Output voltage range
32 to 48
18 to 34 VDC
Output current per channel (max.)
Total current (max.)
24 to 40
0.5 A
16 A
20 A
Status indication (LED)
Green
Switching frequency
(max., ohmic load)
1 kHz
Inductive breaking capacity
1,15 H
24 A
PWM
Quantity
Pulse duty ratio / resolution
Frequency
Like outputs
0 to 100 % / 13 Bit
1 Hz to 1 kHz
Holding time (valve mode)
0 to 2s configurable
Start/Stopp
By dedicated output
Internal power supply
Galvanic isolation from system
Internal power supply
Internal current consumption
(at 5 V)
500 V
BS2xx
180 mA
35
System Overview • Bachmann electronic GmbH • 05/2017 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Digital Input/Output Modules
DIO248
DIO264
DIO280
DIO280 CC
External power supply
Reverse polarity protection
Energetic recovery
Yes
Sensor energetic recovery of DIO by switched-off supply
Input voltage
Nominal 24 VDC
Ambient conditions
Standard
Operating temperature
-30 to +60 °C
Working temperature
-40 to +60 °C
Rel. humidity operation
5 to 95 % without
condensation
Storage temperature
-40 to +60 °C
Rel. humidity storage
5 to 95 % with condensation
ColdClimate ( )
5 to 95 % with
condensation
Order codes
DIO248
00019116-00
Digital input/output module; 16x DI; 600µs filter; 16x DIO; 16x DO;
24V / 0.5A; 4 groups, 600µs filter; 8 interrupt channel; 50µs delay;
isolated
DIO264
00019115-00
Digital input/output module; 24x DI; 600µs filter; 16x DIO; 24x DO;
24V / 0.5A; 5 groups; 600µs filter; 8 interrupt channel; 50µs delay;
isolated
DIO280
00019114-00
Digital input/output module; 32x DI; 600µs filter; 16x DIO; 32x DO;
24V / 0.5A; 6 groups; 600µs filter; 8 interrupt channel; 50µs delay;
isolated
DIO280 CC
00019119-00
Like DIO280; ColdClimate ( )
Accessories DIO248/264/280
Item
Item no.
Description
SS-DIO248 B+C
00012539-50
Terminal set Phoenix screw side (4x SS 35/16) with labeling strip
and coding elements
KZ-DIO248 B+C
00011976-50
Terminal set Phoenix cage clamp (4x KZ 35/16) with labeling strip
and coding elements
SS-DIO264 B+C
00012539-50
Terminal set Phoenix screw side (5x SS 35/16) with labeling strip
and coding elements
KZ-DIO264 B+C
00011977-50
Terminal set Phoenix cage clamp (5x KZ 35/16) with labeling strip
and coding elements
SS-DIO280 B+C
00012538-50
Terminal set Phoenix screw side (6x SS 35/16) with labeling strip
and coding elements
KZ-DIO280 B+C
00011978-50
Terminal set Phoenix cage clamp (6x KZ 35/16) with labeling strip
and coding elements
36
System Overview • Bachmann electronic GmbH • 05/2017 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement