environmental controllers

environmental controllers
ENVIRONMENTAL CONTROLLERS
ENVIRONMENTAL CONTROLLERS 321–334
Autopilot322–326
Greenhouse Master Controller
323
Digital CO2 Controller with Fuzzy Logic
323
Analog CO2 Controller
323
Digital Environmental Controller
324
Analog Environmental Controller
324
Master Digital Timer
324
Adjustable Recycling Timer
325
Day/Night Cooling Thermostat
325
CO2 Monitor
325
Digital pH Controller & Sampling Kit
325
Commercial HID Controllers
326
High Power HID Controllers
326
C.A.P. Controls
327–329
PPM-3 and 2A
327
AIR-1, 2, 3, 3DN, and 4 327
Humidity Controller 327
Art-Dne Timer 328
T mp-Dne328
Cooling Thermostat
328
Hlc-1E Shut-Down
328
Hlc-2E HID Lighting Controller 328
Hlc-3E Preventer 328
C.A.P. Master Light Controllers 329
Link 4
330
Hydroponic Controller
330
Iponic Communication Module
330
Plug 'n' Grow
330–331
Igs-061 CO2 Controller
330
Igs-110 RH & Temperature Controller
330
Igs-220 CO2/RH/Temperature330
Igs-100 CO2 Smart Controller
331
Igs-011 Cycle & LGS-011L Controller
331
Igs-021 Temperature Controller
331
Igs4 Light Load Relay
331
Igs120-On & LGS 120-Off Switcher
331
Horti-Control Flip Flop Box Controllers
331
Hydrofarm Timers & Surge Protectors
332
Heavy Duty Timers
333
Indoor-Outdoor Thermometer
333
Hygro-Thermometer333
Temperature/Humidity Gauge
333
La Crosse Wireless Remote Temperature
& Humidity Monitor
334
La Crosse Wireless Weather Station
334
Biowave Sub Sonic Sound Device
334
hydrofarm.com | 321
ENVIRONMENTAL CONTROLLERS
Free your inner control freak.
Precise tools for controlling growing
environments
AutopilotControllers.com
for more information
Autopilot by Hydrofarm is dedicated to delivering high quality environmental controls to indoor
gardeners. Autopilot's mission is simple – to design and manufacture environmental control
instrumentation that is user friendly and durable, incorporates an optimal level of performance,
and delivers the lowest cost of ownership possible.
Autopilot's focus on excellence through design has resulted in products that are useful
throughout the horticulture industry, delivering on the company's promise of quality,
performance and value in digital and analog environmental control instrumentation. Explore
our family of products and learn how we use technology to interface harmoniously with nature.
Create the optimum
low maintenance system
Don’t sweat the small stuff – set up
the ultimate system and get it all
under control with Autopilot!
lighting
Controls the light cycle
through any 120V
ballast with precision.
lighting
accessories
Additional output for
even more control –
great with light movers!
322 | hydrofarm.com
night cycles
controllers
Control the humidity
with a dehumidifier
and never worry about
nights again.
recycling
functions
Autopilot gives
digital precision
control and a
failsafe battery
back-up.
Periodic control with
precision for all pumps
and CO2 systems.
ENVIRONMENTAL CONTROLLERS
Greenhouse Master Controller
The Autopilot Greenhouse Master Controller (GMC) is designed to
precisely control temperature, humidity, and CO2 in the growing area.
The GMC’s enclosure features four separate power outlets used to
connect external devices such as fans, CO2 injectors, air conditioners,
and dehumidifiers. Each external device easily connects to the unit
creating a simple and user friendly platform.
The GMC’s fan-powered remote combination probe features a highly
accurate dual beam CO2 sensor. The remote sensor can be placed up
to 15 feet from the controller and has been designed to resist EMI /
EFI from electronic ballasts.
Each unit has been pre-programmed with factory recommended
settings for quick plug and play operation. Autopilot controllers offer
grow room guidance.
ITEM CODE
APCECOTH
APCEIC
APCEXT
DESCRIPTION
Greenhouse Master Controller
Internet Cable and Software for Greenhouse
Master Controller
15' Extension Cable for APCECOTH/APCECOD
SRP
$604.95
64.95
19.95
Digital CO2 Controller – Fuzzy Logic
Autopilot's simple to use highly accurate digital CO2 controller has arrived. Autopilot's digital CO2
controller measures the carbon dioxide level in the grow room and automatically turns on and
off the CO2 device to accurately keep the carbon dioxide ppm at the desired level. The Autopilot
digital CO2 controller can be selected to operate in Fuzzy Logic mode or standard logic mode
(for use with generators). Fuzzy Logic mode will calculate the overshoot and undershoot of CO2
injection within the room. When used in Fuzzy Logic mode, the built-in microprocessor will
apply the calculations to the injection schedule which eliminates the guess work and maintains
CO2 levels efficiently. Standard logic CO2 controllers will not make these calculations and will
continue to inject more and more CO2 into the room until the controller
reaches its set-point. Standard CO2 injection methods do not allow
enough time for the carbon dioxide to mix with the air. Standard logic CO2
controllers may be fine when using a CO2 generator which costs very little
to operate, but can be costly and inefficient when using bottled CO2 tanks.
The Autopilot Digital CO2 controller has a 15' remote CO2 sensor with built
in photocell. Controlling CO2 has never been easier or more affordable.
Autopilot's digital CO2 controller eliminates guesswork while it controls
your carbon dioxide level with accuracy and efficiency. Autopilot offers
guidance for your growing environment.
• 15' remote combination probe, CO2, and light
• Accurate dual beam CO2 sensor
ITEM CODE DESCRIPTION
• Adjustable CO2 Dead-Band
APCECOD Digital CO2 Controller Fuzzy Logic
• Fuzzy Logic mode adjustable (On/Off )
APCEXT
15' Extension Cable for APCECOTH/APCECOD
• Built-in data logger stores high and low readings for CO2 ppm
SRP
$534.95
19.95
ANALOG CO2 Controller
The APCECO offers indoor gardeners an economical and simple
method of monitoring and controlling CO2 within the grow area. It
utilizes a highly visible and intuitive LED indicator display to let you
know generalized CO2 levels. The LED indicator will blink to show the
ppm level in increments of 100. The 15' remote sensor allows versatile
placement within the grow area.
ITEM CODE
DESCRIPTION
APCECO
Analog CO2 Controller
SRP
$294.95
hydrofarm.com | 323
ENVIRONMENTAL CONTROLLERS
Digital Environmental Controller
The Autopilot Digital Environmental Controller (DEC) precisely controls temperature
and humidity within your grow area. The DEC coordinates the use of supplemental CO2
injection within the temperature function. The DEC has four outlets and a 15' remote
combination probe with highly accurate temperature, humidity, and light sensors. Easy
to use push button functions are identified on a large digital display. Built-in data logger
records minimum and maximum temperature and humidity levels.
• Combines temperature, humidity and CO2 controls together in one
flexible unit with digital precision
• Control your temperature and humidity independently or synchronized
• Day/night temperature set points
• Remote 15' temperature and humidity sensor
• Resists EMI/EFI from electronic ballasts
• Reliable and easy to use
ITEM CODE
APCETHD
DESCRIPTION
Digital Environmental Controller
SRP
$229.95
Analog Environmental Controller
Control the temperature and humidity within your growing
environment, with adjustable temperature and humidity mode for
independent or synchronized control. Night device outlet operates
when the lights are off, while the built-in photo-cell ensures that your
CO2 device only activates when the lights are on.
• Coordinates supplemental CO2 with your ventilation equipment
• CO2 outlets are automatically disabled while your ventilation
equipment is functioning
• 15' Remote probe with highly accurate sensor
• Can increase or decrease humidity to a specified level
• Resists EMI/EFI from electronic ballasts
• Reliable and easy to use
ITEM CODE
DESCRIPTION
SRP
APCETHA
Analog Environmental Controller
$166.95
ITEM CODE
APCTMDT
DESCRIPTION
Master Digital Timer
SRP
$189.95
Master Digital Timer
Combination Recycling
and Lighting Timer
The Autopilot Master Digital Timer (MDT) controls lighting and recycling
functions in your grow area. The MDT has dual timer functions, a 24-hour
time clock for lighting and a recycling timer for pumps or CO2
injection. The MDT has four outlets. One controls a pump or other
recycling device; two are for “daytime” devices such as lights and light
movers; and one is for a “night” device, which would turn on at night.
The MDT features a “high temperature shutdown” function that
detects unsafe high temperatures in the grow room and turns off
the HID lights in the event of a ventilation failure. The MDT also
features “hot start” protection to ensure proper lamp cooling before
attempting to re-fire. The precise cycle timer can be programmed
anywhere between 1 second and 96 hours.
• Precise digital time clock with battery backup
• Adjustable high temperature shutdown and hot start prevention
• Recycling on/off range
• 3' remote temperature probe
324 | hydrofarm.com
ENVIRONMENTAL CONTROLLERS
Autopilot co2 monitor
Adjustable Recycling Timer
Precise cycle timer with day/night detection
Controls any application requiring
a device to be turned on and off at
precise intervals. This timer has a wide
range of uses including controlling
hydroponic pumps, CO2 injection,
turning on and off exhaust fans,
misters, and more.
There is no programming
required, it is easy to set
and operate. Cycle timing is
adjustable for operation during
the day, night or 24 hours.
• Controls 120 V pumps, fans
and more on a periodic repeat
cycle
• Adjustable “On” duration
spans from 15 seconds to
5 hours
• Adjustable “Off” duration
spans from 15 seconds to
13 hours
• Functions during the day,
during the night or 24 hours
ITEM CODE
DESCRIPTION
APCTART
Analog 24-Hour Recycling Timer
SRP
$74.95
Day/Night coolinG
thermoSTAT
• C
ontrols heating and
cooling equipment with
both day/night set-points
• Precise temperature sensor
• Temperature control
differential +/- 3°F
• Built-in photocell
• 45°F – 95°F control range
ITEM CODE
DESCRIPTION
APCET
Day/Night Thermostat
SRP
$69.95
Developed to detect the presence of CO2 in ambient air, the Autopilot
desktop CO2 monitor is smart, compact, and easy to use. In addition to
measuring the CO2 concentration, APCEM also measures the ambient
temperature and the relative humidity. High quality LCD display.
Independent CO2, RH, and temperature
readings. Calculates and displays
ventilation rates.
• Built-in data logger can store 48 sets
of CO2, temperature, and humidity
readings over 24 hours; one log
every 30 minutes
• Min/max mode records the
maximum and minimum
concentration of CO2 since the
device was last turned on
• High altitude setting allows you to
compensate for specific location
with adjustable altitude set-points
ITEM CODE
DESCRIPTION
APCEM
Autopilot CO2 Monitor
SRP
$134.95
Digital pH Controller
The Autopilot pH-1 controller
accurately and reliably measures
and controls the pH of any water-based solution,
including hydroponic nutrient mixtures, and
fish aquarium water. After selecting the desired
pH setting from 5.0 to 8.0 pH, the pH controller
measures the pH value of the solution and
automatically adds pH adjustment to change
the liquid's pH to the selected level. Includes a
chemically resistant low voltage dosing pump, and
both pH and temperature sensors. Features include
a simple, user-friendly interface, digital display,
adjustable dosing time, adjustable mixing time, High precision
adjustable pH dead band, maximum number
measurement
of dosing cycles, pH high and low limits, and
and control
a data logger which shows the minimum and
maximum pH recorded.
ITEM CODE
DESCRIPTION
APCEPH1
Digital pH Controller
APCEPH1RP
Replacement probe for APCEPH1
SRP
$369.95
64.95
pH controller sampling kit
pH sampling assembly, allows for more
accurate readings. Sampling kit includes
a submersible pump, ¾" x 5' tubing and
molded sensor assembly with mounting
bracket. The sampling assembly
provides a stable method to mount the
pH and temperature sensors. It uses a
submersible pump to mix the water and
to provide constant water flow across
the sensor to accurately measure the
water pH levels. Pump 300 LPH (80 GPH)
-6 foot lift.
ITEM CODE
DESCRIPTION
APCEPH1SK pH Controller Sampling Kit
SRP
$74.95
hydrofarm.com | 325
ENVIRONMENTAL CONTROLLERS
COMMERCIAL HID Controllers
Autopilot's 12- and 8-outlet commercial light controllers are designed
to safely control today's digital ballasts.
These commercial controllers feature an integrated time delay to "soft
start" each bank of four lights, reducing the start-up load. External
breakers allow the user to easily shut down power to the attached
equipment. The commercial light controller is made from steel and
built to last.
• Heavy-duty relays
• Durable steel enclosure
• Operate multiple HID or fluorescent light fixtures from a single
controller or timer device
• 120 V trigger cable and 120 V accessory outlet
APCLC8DX
ITEM CODE
APCLC12DX
APCLC8DX
APCLC12DX
DESCRIPTION
High Power HID Commercial 12-light
Controller
High Power HID Conmmercial 8-light
Controller
SRP
$439.95
324.95
High Power HID Controllers
Control multiple lights from one time-clock
or controller device. Power is wired directly
into the outlet timer box, and all of the outlets
are controlled by one 120 V trigger cable.
You can plug the trigger cable into a standard 24-hour timer or
environmental controller. All controllers feature premium quality
industrial grade relay and durable steel chassis, plus a 3-year no
hassle warranty.
8-outlet controller
Control up to eight lights from one
time-clock or controller device. 240 V
power is wired directly into the eight
outlet timer box, and all of the outlets
are controlled by one 120 V trigger
cable. Rated for 60 amps at
120/240 V, with eight 120/240 V
X-style receptacles.
326 | hydrofarm.com
4-Outlet controller
Control up to four lights from one
time-clock or controller device.
120/240 V power is wired directly
into the four outlet timer box, and
all of the outlets are controlled by
one 120 V trigger cable. Rated for
30 amps at 120/240 V, with four
120/240 V X-style outlets. This allows
for running your ballasts at 120/240
V without having to change out your
ballast power cords.
ITEM CODE
APCL8DX
APCL4DX
DESCRIPTION
High Power HID Controller, 8-light
High Power HID Controller, 4-light
SRP
$209.95
124.95
ENVIRONMENTAL CONTROLLERS
C.A.P. controls are warranted to be either rebuilt or replaced at
the manufacturer’s determination for a period of 3 years of normal use.
Modification, misuse, or abuse voids this warranty.
AIR-3
PPM-3
Expands the line of
atmospheric controllers
by providing the ability to
coordinate supplemental CO2
with ventilation equipment.
Rated for 15 A at 120 V.
The most affordable and simple CO2
controller available. Very accurate at
measuring levels of carbon dioxide in your
growing area from 0–5,000 ppm.
ITEM CODE DESCRIPTION
CAPPM3
CO2 ppm Controller w/ ppm Sensor
SRP
$474.95
ITEM CODE
DESCRIPTION
CAAIR3
Atmosphere CO2 Controller, 15 A @ 120 VAC
ppm-2a
AIR-3DN
The absolute best CO2 controller available today.
Fuzzy Logic™ brings the CO2 level up to the
desired setting without over-shooting. Used to
control both compressed CO2 and gas-burning
CO2 generators.
Provides the ability to
coordinate supplemental CO2
with ventilation equipment.
Features separated day and night
temperature settings. Rated for
15 A at 120 V.
ITEM CODE DESCRIPTION
CAPPM2A
Fuzzy Logic CO2 Controller, Complete with
ppm Sensor
SRP
$534.95
SRP
ITEM CODE
DESCRIPTION
CAAIR3DN
Atmosphere / CO2 Controller, Day & Night
Temp w/Photocell, 15 A @ 120 VAC
$216.95
SRP
$216.95
AIR-4
AIR-1
All the features of the AIR-3
plus independent temperature
and humidity controls and
photocell night device. Rated
for 15 A at 120 V.
CAAIR1 – Allows you to
control the temperature and
humidity within your growing
environment.
ITEM CODE
DESCRIPTION
CAAIR1
Atmosphere Controller, Temp & Humidity,
15 A @ 120 VAC
SRP
$154.95
ITEM CODE
DESCRIPTION
CAAIR4
Atmosphere/CO2 Controller, Split Temp &
Humidity 15 A @120 VAC
SRP
$224.95
AIR-2
Humidity Controller
Same features as the
AIR-1 plus independent
temperature and humidity
controls. Rated for 15 A
at 120 V.
Increases or decreases the humidity levels
in your garden. Compatible with any
equipment operating on 120 V or less. Set
the desired humidity level, the controller will
activate equipment accordingly, indicator
lights show it’s working. 3-year warranty.
ITEM CODE
DESCRIPTION
CAAIR2
Atmosphere Controller, Temp
& Humidity, 15 A @ 120 VAC
SRP
$154.95
ITEM CODE
DESCRIPTION
CAHUM1
Humidity Controller, 15 A @ 120 VAC
SRP
$121.95
hydrofarm.com | 327
ENVIRONMENTAL CONTROLLERS
HLC-2E HID Lighting Controller
Designed to protect your expensive HID lights
from hot starts, which occurs when your
lights are turned off and then back on before
the lamp is allowed to cool off.
ART-DNe Timer
Electronic adjustable recycling timer
controls any application requiring a device
to be turned on and off at precise intervals.
Adjustable on time of 1 second to 40 minutes,
and an off time of 1 minute to 8 hours.
Rated for 15 A at 120 V.
ITEM CODE
DESCRIPTION
CAART-DNE
Electronic Adjustable Recycling
Timer, .1–40 Min. On/1–480 Min.
Off, 15 A @ 120 VAC
ITEM CODE
DESCRIPTION
CAHLC2
HID Lighting Controller, Delay on Timer, 15
Minute on Delay, 15 A @ 120 VAC
SRP
$79.95
SRP
$82.95
HLC-3e Preventer
HID lighting controller combines the
functions of the HLC-1 and HLC-2 to protect
your expensive HID lights from hot starts and
your garden from high temperatures.
TMP-DNe
The TMP-DNe is a day/night electronic
cooling or heating thermostat with a
differential of 3, 5, or 7 degree settings.
ITEM CODE
DESCRIPTION
CATMP-DNE Cooling Thermostat, 50–115°F, 15 A @ 120 VAC
SRP
$79.95
Cooling Thermostat
CATMP1
Cooling Thermostat, 50–115°F, 15 A @ 120 VAC
SRP
$52.95
HLC-1e Shut-Down
Used as a high temperature shutdown
by plugging your lights into the outlet
and setting the maximum temperature
that your growing environment can
sustain.
ITEM CODE
DESCRIPTION
CAHLC1
HID Lighting Controller, Hi-Temp
Shutdown, 50–115°F, 15 A @ 120 VAC
328 | hydrofarm.com
DESCRIPTION
CAHLC3
HID Lighting Controller, 15 Minute “HotStart” & High-Temperature Protection,
15 A @ 120 VAC
SRP
$92.95
Hydrofarm
is getting social!
Check us out on Facebook, Twitter, and YouTube for
expert advice, fun competitions, promos and giveaways.
Like us on Facebook, share our posts, and join in the fun!
The TMP-1 allows you to control the
temperature within your growing
environment. The TMP-1 is a cooling
thermostat with a 3-ft. remote sensor.
Rated for 15 A at 120 V.
ITEM CODE DESCRIPTION
ITEM CODE
SRP
$82.95
ENVIRONMENTAL CONTROLLERS
Complete details
& specs at
Hydrofarm.com
C.A.P. Master Light ControllerS
C.A.P. Master Light Controllers are the best
devices for controlling from 4 up to 24 HID
lights from one time-clock or controller.
These controllers deliver performance
and value while still providing safety and
reliability. Most models feature 120/240 V
X-style outlets, which allows for running
your ballasts at 120/240 V without having
to change out your ballast power cords – or
choose a 240 V only model for commercial
use. C.A.P. Master Light Controllers are
available with a variety of options, including single
and dual trigger cables, auxiliary outlets, and
integrated timers that allow you to control your
MLC with the built-in time clock.
CAMLC24X
CAMLC16X
Visit Hydrofarm.com for complete product
details and specs for each item.
CAMLC4X
CAMLC4XT
CAMLC8X
CAMLC8XT
C.A.P. Master Light ControllerS
ITEM CODE
DESCRIPTION
# of plugs
Amps
voltage
Warranty
SRP
CAMLC4X
CAMLC4XT
MLC 4 Light X-Plug w/Trigger Cable (120/240 V)
4
30
120/240
3 yrs
$124.95
MLC 4 Light X-Plug w/Timer (120/240 V)
4
30
120/240
3 yrs
159.95
CAMLC8X
MLC 8 Light X-Plug w/Trigger Cable (120/240 V)
8
50
120/240
3 yrs
$209.95
CAMLC8XT
MLC 8 Light X-Plug w/Timer (120/240 V)
8
50
120/240
3 yrs
234.95
CAMLC8DX
MLC 8 Light X-Plug w/Dual Trigger Cables (120/240 V)
8
50
120/240
3 yrs
222.95
CAMLC12P4
MLC 12 Light X-Plug (120/240 V) plus (4) 120 V Aux Outlets w/Trigger Cable
12
60
120/240
3 yrs
$579.95
CAMLC16
MLC 16 Light Commercial (240 V only) w/Trigger Cable
16
80
240
3 yrs
$579.95
CAMLC16X
MLC 16 Light X-Plug (120/240 V) w/Trigger Cable
16
80
120/240
3 yrs
539.95
CAMLC16DX
MLC 16 Light X-Plug (120/240 V) w/Dual Trigger Cables
16
80
120/240
3 yrs
579.95
CAMLC20P4
MLC 20 Light X-Plug (120/240 V) plus (4) 120 V Aux Outlets w/Trigger Cable
20
100
120/240
3 yrs
$734.95
CAMLC24
MLC 24 Light Commercial (240 V only) w/Trigger Cable
24
120
240
3 yrs
$734.95
CAMLC24D
MLC 24 Light Commercial (240 V only) w/Dual Trigger Cables
24
120
240
3 yrs
759.95
CAMLC24X
MLC 24 Light X-Plug (120/240 V) w/Trigger Cable
24
120
120/240
3 yrs
689.95
CAMLC24DX
MLC 24 Light X-Plug (120/240 V) w/Dual Trigger Cables
24
120
120/240
3 yrs
734.95
hydrofarm.com | 329
ENVIRONMENTAL CONTROLLERS
Link 4 Hydroponic controller
Link4 iPonic Controllers are the latest in greenhouse environmental
automation. Control and integrate a variety of equipment in your
grow room with one easy-to-use system. Great for controlling heating,
cooling, humidity, lighting needs, and more. Precision controls allow
you to improve crop quality, reduce equipment usage, and lower
energy costs. The iPonic 600 gives complete monitoring and control
from outside the grow room via optional PC software, smart phone
applications, and internet connectivity.
Better control
= Better yields
LC99511
• 8 power outlets integrated directly into
controller
• Integrated remote combination sensor
with 16' cord measures CO2, temperature,
humidity and light
• Easy-to-use touch screen display
• Factory presets for instant plug and play on reflective materials
operation
• Customized programming in minutes
• Integrated high temperature shut off
• Alarms for high/low temperature, humidity,
CO2 via text message or e-mail
Latest greatest @
• UL and CUL approved
Hydrofarm.com
• 3-year limited warranty
• 1-year warranty on sensor module
• Temperature: Range : -40°F to 150°F
Accuracy : +/-0.9°F (From 50°F to 104°F)
• Humidity: Range : 0% to 100%
Accuracy: +/-2% from 10% to 90%
• CO2: Range : 0 to 10,000 ppm
Accuracy : +/- (30 ppm +5%)
• Light: Range : 0 to 2000 W/m2
Accuracy : PAR (400 nm – 750 nm)
3
iPonic Communication module
DESCRIPTION
Link 4 Hydroponic Controller
Link 4 iPonic Communication Module
330 | hydrofarm.com
• Easy to install and set up
• AC adapter mandatory use on
newer units
• CO2 controller with display and
day/night detection
• Controls your CO2 tank or gas
burner during day only
• Programming allows to
increase or to decrease the CO2
concentration (only during the
lighting period)
• Displays both CO2
concentration and temperature
ITEM CODE
NBIGS061
• A
djustable CO2 set point from
100 to 4,900 ppm
• Yearly easy calibration
by the user when prompted
on display
• Precise CO2 sensor:
truly ±75 ppm
• High temperature shut-off
function adjustable from 50
to 122°F (10 to 50°C)
• 120 V, 15 A, 2 HP load capacity
DESCRIPTION
CO2 Smart Controller with High-Temp Shut-Off
SRP
$499.99
iGS-110 RH &
Temperature
Controller
• P
recise temperature and
RH sensors
• Day and night set-points
• Can cool, heat, humidify,
dehumidify, or cool and
dehumidify
ITEM CODE DESCRIPTION
NBIGS110 Relative Humidity/Temperature Controller
NBIGS110S Relative Humdity/Temp Controller w/External
Probe
SRP
$439.99
459.99
iGS-220 CO2/RH/
Temperature
• S eamless integration of CO2
enrichment and intake/
exhaust ventilation
• CO2, relative humidity,
and temperature precise
electronic sensors
• 24-hour data logging of
sensor values
• Alarm system hook-up
(with IMS-100)
Control your iPonic controller from anywhere
in the world. This optional module will enable
you to connect your controller to the internet
via an RJ45 connector. Control it from
your PC, Mac, smartphone, or any web
browser capable device. Log into the
Link4 Cloud website and control
all the units you own from
one place.
ITEM CODE
LC99511
LC99512
iGS-061 CO2 ControlLER with
High Temperature Shut Off
SRP
$1,399.00
114.95
ITEM CODE DESCRIPTION
NBIGS220 CO2/RH/Temperature Smart Controller
NBIGS221 CO2/RH/Temp Controller Day/Night Settings
SRP
$679.99
999.99
ENVIRONMENTAL CONTROLLERS
iGS-100 CO2 Smart Controller
iGS120-on & iGS120-off Switcher
• A
n auxiliary output can be
configured to defeat ventilation
during a CO2 enrichment or venting
process
• An additional delay may be set to
maintain auxiliary output defeating
for an additional 5, 10, 15, or 20 minutes
• Each output can be set to operate during the day only, the night
only, or day and night
• 15A /120V switches OFF when sense
cord is powered
• Used to inhibit CO2
dehumidifiers and/or other
equipment while venting is in
progress
• 15A/120V switches ON when
sense cord is powered
• Used to turn equipment on
from other power circuit
ITEM CODE DESCRIPTION
NBIGS100 CO2 Auxiliary Smart Controller
ITEM CODE
NBIGSILS120OFF
NBIGSILS120ON
SRP
$509.99
DESCRIPTION
120V - 15A OFF Switcher
120V - 15A ON Switcher
SRP
$89.99
89.99
iGS-011 Cycle & iGS-011L controller
•
•
•
•
Cycle timer with photocell
Day and night operation or day only
ON cycles from ½ minute to 30 minutes
OFF cycles from 1 minute to 12 hours
FLIP FLOP BOX CONTROLLERS
ITEM CODE DESCRIPTION
NBIGS011 Precise Cycle Controller without Display
SRP
$99.99
iGS-021 Temperature controller
• Temperature controller without display
• Can be set to heat or cool with day and
night set-points
ITEM CODE DESCRIPTION
NBIGS021 Day/Night Controller without Display
SRP
$99.99
iGS4 Light Load Relay
These controllers allow you to expand your growing area without
having to increase power requirements or purchase additional ballasts.
All you need is an additional reflector and lamp for each ballast in your
system. Heavy duty aluminum chassis won't rust. Made in the USA.
• Use 2 or 4 bulbs on one ballast (not simultaneously)
• Maximize available power by using all 24 hours of the day
• Run lights in several different staggered configurations
• Saves energy by using fewer
ballasts
• No need to run additional
power circuits
• Works with magnetic core
and digital ballasts
• Plug and play with most
popular lighting systems
• Piggyback trigger cable
allows daisy chaining
additional controllers
• 5-year hassle-free warranty
• S afely switch high amperage equipment with low cost timer
• Incorporated 0–20 minutes ON delay
• Prevent hot bulb start-ups or sequence turn ons to reduce
electrical system loading
NBILS4121, NBILS4121S
ITEM CODE DESCRIPTION
NBILS4121 4 Lights/Load Switcher w/Built-in Delay,
120 V in, 120 V out
NBILS4121S 4 Lights/Load Switcher w/Built-in Delay,
240 V in, 120 V out
NBILS4241 4 Lights/Load Switcher w/Built-in Delay,
240 V in, 240 V out
DS83
DS84
NBILS4241
SRP
$149.99
149.99
189.99
ITEM CODE
DS81
DS82
DS83
DS84
DS85
DS86
DESCRIPTION
Flip Flop Box, 2 In / 4 Out
Flip Flop Box, 4 In / 8 Out
Flip Flop Box, 6 In / 12 Out
Flip Flop Box, 8 In / 16 Out
Flip Flop Box, 10 In / 20 Out
Flip Flop Box, 20 In / 40 Out
SRP
$298.95
548.95
748.95
998.95
1,148.95
2,298.95
hydrofarm.com | 331
ENVIRONMENTAL CONTROLLERS
7–Day Dual Outlet Digital Timer
•
•
•
•
•
•
Heavy Duty Grounded Timer
•
•
•
•
TM01015
15 minute ON/OFF
Great for lighting, pumps, etc.
15 A
TM01715D
1 minute ON/OFF
Up to 8 ON/OFF cycles per day
Different days and cycles
Controls 2 outlets simultaneously
15 A
Great
value!
ITEM CODE DESCRIPTION
TM01715D 7-Day Dual Outlet Digital Timer
ITEM CODE DESCRIPTION
TM01015 15 A, 24-Hr, Grounded Timer
SRP
$10.95
240V Heavy Duty Timer
• 4
timed, 4 constant outlets
• 15 A / 2 H.P. and accepts
the most common 240 V
cord (NEMA 6–15P)
• 2 ON/OFF cycles per day
for 240 V lights, fans
or other appliances
• Convenient clamshell
packaging
Dual Outlet
Grounded Timer
•
•
•
•
TM01015D
15 minute ON/OFF
24-hour cycle
Controls 2 outlets
simultaneously
• 15 A
ITEM CODE DESCRIPTION
TM01015D Dual Outlet Grounded Timer
SRP
$17.95
ITEM CODE DESCRIPTION
TM01240 15 Amp, 3600W, 240V Timer
SRP
$24.95
SRP
$12.95
Hydrofarm Surge
Protector
•
•
•
•
7–Day Digital Timer
•
•
•
•
•
TM01715
1 minute ON/OFF
Up to 8 ON/OFF cycles per day
Excellent for hydro systems
15 A
ITEM CODE DESCRIPTION
TM01715 7-Day Digital Timer
332 | hydrofarm.com
SRP
$16.95
Power indicator
Surge protector
6 ft. power cord
Circuit breaker
switch for safety
ITEM CODE DESCRIPTION
TMSP8
Hydrofarm Surge Protector
SRP
$21.95
ENVIRONMENTAL CONTROLLERS
MECHANICAL HEAVY DUTY TIMER
Heavy duty 24-hour mechanical timer features a weatherproof
plastic box. Easy-to-read and set 24-hour dial AM/PM. For all
indoor and outdoor applications.
• 208-277 VAC, 40 A, 60 Hz • Captive trippers – can’t be lost
• Resistive or tungsten
• Ground lug termination
• UL and CSA listed
• Large screw terminals for easy
wiring #8 AWG
• DPST model switching
Indoor-Outdoor
Thermometer
The large display shows current
temperature and humidity levels,
and includes a remote probe for
second zone temperature. Records
high and low points for both
temperature and humidity.
ITEM CODE DESCRIPTION
HGIOHT
Active Air In-Out Thermometer w/
Hygrometer
ITEM CODE DESCRIPTION
TMHDP104 Mechanical Heavy Duty Timer
SRP
$82.95
New from Intermatic, this
convenient, efficient 7-day
outdoor timer offers:
• 40 A rating
• Multi-voltage: 120, 208-240, or
277 VAC
• Field adjustable DIP switch
• SPDT and DPDT all-in-one
• UL type 3R outdoor enclosure
is standard
• Power and status LED indicator
lights
• Independently adjustable
trippers at 2-hour intervals
• Real time clock face – easy to
(15 minute intervals for the
program and read
GMTM40)
• Captive trippers – can’t be lost
•
ON/OFF/Auto override switch
• Large screw terminals for easy
• Ground lug termination
wiring #8 AWG
DESCRIPTION
Intermatic 24-Hour Outdoor Timer
Intermatic 24-Hour Plastic Outdoor
Timer
TMGM40AVW Intermatic 7-day Plastic Outdoor
Timer
TMHDT101 Intermatic T101 Timer w/Metal Case
(120 V)
TMHDT104 Intermatic T104 Timer w/Metal Case
(240 V)
TMHDTRIP
1 Set (ON/OFF) Metal Tripper for
T101 & T 104
HYGRO-Thermometer
This large number LCD display
is visible from a distance. Very
accurate and hangs or mounts
on a wall surface.
Intermatic
Heavy Duty Timer
ITEM CODE
TMGM40
TMGM40AV
SRP
$19.95
SRP
$103.95
103.95
164.95
ITEM CODE DESCRIPTION
HGIOHTJ Active Air Hygro-Thermometer
SRP
$21.95
Temperature/Humidity
Gauge
Large dial keeps you
informed about your growing
environment's temperature
and humidity. Easily visible
across the room.
ITEM CODE DESCRIPTION
HGTHG
Temperature/Humidity Gauge
SRP
$24.95
74.95
89.95
3.95
Latest greatest @
Hydrofarm.com
hydrofarm.com | 333
ENVIRONMENTAL CONTROLLERS
La Crosse Wireless Remote Temperature & Humidity
Monitor with Early Warning Alerts
iPhone not included
Use a smartphone, tablet, or computer to monitor ambient
temperature and humidity while you're away. Ideal for greenhouses,
gardens, basements, offices, attics – anywhere temperature and
humidity are a concern. Just connect the Gateway to your existing
router with the included LAN cable. The temperature and humidity
sensor transmits data to the Gateway (200 ft. range), which
then uploads your data to the LaCrosse website for 24/7 remote
monitoring via email alert or text message.
You can ...
• Set custom early warning text and e-mail alerts to notify you to take
action when temperature or humidity exceed the desired range, the
connection is lost which could signify a power outage, or the sensor
batteries are low
• Monitor and protect sensitive plants, gardens, greenhouses, and
indoor/outdoor temperature and humidity
• Monitor greenhouse temerature and humidity levels. Prevent mold
or frozen pipes with humidity and temperature level alerts
La Crosse Wireless Weather Station
with Moon Phase
Instant weather right at your fingertips! The
LaCrosse Wireless Weather Station displays
indoor/outdoor temperature and humidity, plus
moon phase.
• 8 Moon phases
• IN/OUT temperature
with MIN/MAX
records (°F/°C)
• IN/OUT humidity
(%RH)
• 12/24 Hour time
display
• Calendar (month and
date)
• Low battery indicators
• Desktop or wall hang
BIOWAVE Sub sonic
sound device
Biowave Sub Sonic Sound Devices create a
subsonic harmonic wave that improves plant
respiration, increasing plant yields by an
average of 20% and total dissolved solids by
a whopping 55%! This revolutionary, patentpending machine enhances plant metabolism,
photosynthesis and health so your hydroponic
plants grow more rapidly, resist diseases better,
and produce larger yields. It's easy to use, just
plug and play. Comes with a 1-year warranty.
Now available in two sizes!
334 | hydrofarm.com
Wall hanging
or free standing
Features
• Monitor (CH1) ambient air
temperature and humidity
• Probe temperature (CH2) when
optional probe is attached (dry,
wet, and wet-threaded probe
are sold separately)
• Weather resistant case
• Add up to 5 sensors per
gateway to monitor addional
areas
• 200-ft wireless range
Specifications
• Humidity range: 3%–99%
(%RH)
• Temperature range: -40°F–
140°F
• 2 "AAA" Alkaline batteries
(not included)
• Internet gateway, LAN cable,
and AC adapter included
• High-speed Internet and
router required
ITEM CODE DESCRIPTION
LCT1111
La Crosse Temp & Humidity Wireless Alert System
Specifications:
• 260 ft. transmission range
• Wireless outdoor
temperature range:
-39.8–139.8°F
(-39.9–59.9°C)
• Indoor temperature
range: 14.1–139.8°F
(-9.9–59.9°C)
SRP
$134.95
• Outdoor humidity
range: 1–99%
• Indoor humidity
range: 20–95%
• Up to 12 month
battery life
• Weather display: 2 "AAA"
alkaline batteries
• Thermo-hygro transmitter:
2 "AAA" alkaline batteries
ITEM CODE DESCRIPTION
LCT9066
La Crosse Wireless Weather Station w/Moon Phase
SRP
$34.95
BIOWAVE Sub sonic sound device – BW92000
Covers 1 acre (44,000 sf ). Made of brushed aluminum. The 9200 unit is specifically
designed for indoor plants–great for greenhouses or larger areas. Hangs from the
ceiling. New design and new drive system. Whisper quiet.
BIOWAVE mini growth booster – BW1000
Covers 500sf. Made out of lexan plastic.
Ideal for a small grow room. Can hang
from the ceiling or sit on a flat surface.
ITEM CODE DESCRIPTION
BW92000 Biowave Sub Sonic Sound Device
BW1000
Biowave Mini Sub Sonic Sound Device
SRP
$2,400.00
1,499.95
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement