Shure | E4C-N-E | User guide | Shure E4C-N-E headphone

Shure E4C-N-E headphone
E4c
Sound Isolating Earphones
The E4c earphone features HighDefinition drivers with Tuned-Port
technology for an ultra-wide frequency
soundstage with brilliant
highs and extended bass.
As the ideal companion
to any portable or home
audio source, the E4c
incorporates the same
precision components
used by professional
musicians to bring
incredibly accurate sound
with remarkable isolation.
WEARING THE EARPHONES
Three popular methods for wearing the earphones are illustrated below.
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
�
right ear
left ear
Over the ear
in back
Over the ear
in front
Straight down
Tighten the cable and take up slack by raising the cable sleeve .
©2005, Shure Incorporated
27EN3189B (Rev. 4)
Make sure that the sleeve completely
covers the earphone nozzle. If any part
of the nozzle is exposed, the sleeve is
not properly installed.
Printed in U.S.A.
CHOOSING AN EARPHONE SLEEVE
CLEANING THE EARPHONE NOZZLE
FULL TWO YEAR WARRANTY
Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, fits comfortably, and is easy to remove from
your ear.
If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.
Shure Incorporated (“Shure”) hereby warrants that this product will be free
from defects in materials and workmanship for a period of two years from
the date of purchase. At its option Shure will repair or replace the defective
product and promptly return it to you, or refund the purchase price. You should
retain proof of purchase to validate the purchase date and return it with any
warranty claim.
Wax Removal Loop
Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Foam Sleeves
When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal.
Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.
Nozzle
When cleaning, do not force any object through the earphone nozzle! This will
damage the earphone sound filter.
If you believe this product is defective within the warranty period, carefully
repack the unit, insure it, and return it postage prepaid to:
Shure Incorporated
5800 W. Touhy Ave.
Niles, IL 60714-4608
If necessary, the supplied replacement nozzles may be used. See the back of
this guide for instructions on nozzle replacement.
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
SAFE USE

Use a slow twisting motion to remove the earphones. Never pull
on the earphone cord.

Warning: If a sleeve becomes lodged in your ear, seek skilled
medical assistance to remove the sleeve. Damage to the ear
may be caused by non-professionals attempting to remove the
sleeve.

Prior to inserting the earphone, always recheck the sleeve to
make sure it is firmly attached to the nozzle.

Turn up the volume control only far enough to hear properly.

Ringing in the ears may indicate that the volume level is too high.
Try lowering the volume.

If you connect these earphones to an airplane’s sound system,
listen at low levels so that loud messages from the pilot do not
cause discomfort.

Have your ears checked by an audiologist on a regular basis. If
you experience wax buildup, discontinue use until an audiologist
has examined your ears.

Stop using the earphones if they are causing great discomfort or
infection.
TECHNICAL SPECIFICATIONS
FURNISHED ACCESSORIES
Level attenuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PA235
Carrying pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95A2259
Fit Kit w/cleaning tool . . . . . . . . . . . . . . . . . . . . . . . . 90XJ1371
Triple flange sleeves . . . . . . . . . . . . . . . . . . . . . . . . . 90WX1371
Replacement nozzles . . . . . . . . . . . . . . . . . . . . . . . . 90XF1371
Plug adapter — 1/8” to 1/4” . . . . . . . . . . . . . . . . . . . PA234
REPLACEMENT PARTS
Bag of 20 foam sleeves . . . . . . . . . . . . . . . . . . . . . . . PA750
Bag of 500 foam sleeves . . . . . . . . . . . . . . . . . . . . . . PA754
Bag of 10 clear flex sleeves:
small . . . . . . . . . . . . . . . . PA756S
medium . . . . . . . . . . . . . . PA756M
large . . . . . . . . . . . . . . . . . PA756L
Bag of 10 soft flex sleeves:
small . . . . . . . . . . . . . . . . PA758S
medium . . . . . . . . . . . . . . PA758M
large . . . . . . . . . . . . . . . . . PA758L
Triple-flange sleeves (2) . . . . . . . . . . . . . . . . . . . . . . PA755
Replacement nozzles (2) . . . . . . . . . . . . . . . . . . . . . . PA4NC
PA235 LEVEL ATTENUATOR
REPLACING THE EARPHONE NOZZLE
The PA235 provides you with volume control when you are connecting
earphones to airplane seat outputs. It is intended only for airline use. It is not
intended for use with other audio sources.
Replace the nozzle if it becomes damaged, or if wax buildup cannot be
removed using the wax removal loop.
To use the PA235:
1.
2.
3.
4.
5.
6.
7.
Connect the 1/8-inch jack on the earphones to the female jack on the
PA235.
Turn the PA235 volume down completely (toward – ).
Connect the PA235 to the 1/8-inch audio output of the airplane seat.
Insert the earphones into your ears (see Inserting the Earphones).
Turn the volume on the PA235 up slightly (toward +).
Adjust the seat volume as follows:
•
If the audio is distorted, turn down the volume at the seat.
•
If there is no distortion, but there is background noise, turn up the
seat volume.
Adjust the PA235 volume to a comfortable level.
NOTE: the program may be interrupted by messages from the pilot that
are much louder. To avoid discomfort, keep the overall volume just loud
enough for listening enjoyment.
1.
2.
3.
4.
Be careful when replacing the earphone nozzle. Parts are small and easily lost
if dropped.
�
� �
Single balanced armature
Sensitivity (at 1kHz)
109 dB SPL/mW
Impedance (at 1kHz)
29 Ω
Output connector
Gold-plated 3.5 mm (1/8-inch) stereo plug
Cable length
157 cm (62”)
Net weight
31 g (1.1 oz.)
Operational temperature
-18° C to 57° C (0° F to 135° F)
Storage temperature
-29° C to 74° C (-20° F to 165° F)
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often find
custom-fit molded sleeves offer the best comfort and sound isolation.
Ask a Hearing Health Care Professional about creating custom molded sleeves
for your earphones. For more information, visit http://www.sensaphonics.com.
MAINTENANCE
Unscrew the retainer  from the earphone base .
Remove the nozzle .
Slide the retainer  over the new nozzle .
Place the nozzle on the earphone base with the flange  aligned with the
groove in the base. Tighten the retainer .
�
Transducer type


Careful maintenance ensures a tight seal between the sleeve and
nozzle, improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.

Do not expose earphones to extreme temperatures.

Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2)
environments.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising