Samsung P2250W Datasheet User manual

Add to my manuals
41 Pages

advertisement

Samsung P2250W Datasheet User manual | Manualzz

LCD Monitor

User Manual

SyncMaster P2250W

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

Table Of Contents

MAJOR SAFETY PRECAUTIONS

Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

INSTALLING THE PRODUCT

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installing the Stand for the Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Connecting with a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

USING THE PRODUCT

Setting the Optimal Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Product Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-5

INSTALLING THE SOFTWARE

Natural Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

MagicTune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

MultiScreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

TROUBLESHOOTING

Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

MORE INFORMATION

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) - Europe only . . . . . . . 6-4

1 Major Safety Precautions

1-1 Before You Start

Icons used in this manual

ICON NAME

Caution

MEANING

Indicates cases where the function may not work or the setting may be canceled.

Note Indicates a hint or tip to operate a function.

Using this Manual

• Make yourself fully aware of the safety precautions before using this product.

• If a problem occurs, refer to the 'Troubleshooting' section.

Copyright Notice

The contents of this manual are subject to change without prior notice for performance improvement.

Copyright © 2009 Samsung Electronics Co., Ltd. All Rights Reserved.

The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.

The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co., Ltd.

The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.

Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.

The ENERGY STAR logo is the registered trademark of the U.S. Environmental Protection Agency.

All other trademarks mentioned herein belong to their respective companies.

Major Safety Precautions 1-1

1-2 Custody and Maintenance

External Surface and Screen Maintenance

Clean the product with a soft dry cloth.

• Do not clean the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product.

• Do not scratch the screen with your fingernails or a sharp object.

This may result in scratches or damage to the product.

• Do not clean the product directly by spraying water onto the product.

If water enters the product, it may result in fire, electric shock or a problem with the product.

• A white stain may be generated on the surface of the highglossy model due to the inherent characteristics of the material, if a supersonic humidifier is used.

The appearance and the color may differ depending on the model.

About persistent images

• Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for a long time, set the power-saving mode or screen saver.

• Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either brighter or darker than normal by appr. 1ppm (parts per million) pixel.

The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical

Resolution x 3

Example) If the maximum resolution is 1680 x 1050, the number of sub-pixels is 1680 x 1050 x 3 = 5,292,000.

1-2 Major Safety Precautions

1-3 Safety Precautions

Icons used for safety precautions

ICON NAME

Warning

Caution

MEANING

Failing to follow the precautions marked with this sign, may result in a serious injury or even a fatality.

Failing to follow the precautions marked with this sign, may result in a personal injury or property damage.

Meaning of Signs

Do not perform.

Do not disassemble.

Do not touch.

Must be followed.

The power plug must be unplugged from the wall outlet.

Must be grounded to prevent electric shock.

Power Related

The following images are for your reference and may differ depending on models and countries.

Warning

Avoid using a damaged power cord or plug or a loose power outlet.

• Otherwise, it may result in electric shock or fire.

Avoid plugging in or unplugging the power supply with wet hands.

• Otherwise, it may result in electric shock.

Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only).

• Otherwise, it may result in electric shock or injury.

Keep the power cord and the product away from a heater.

• Otherwise, it may result in electric shock or fire.

Avoid connecting multiple electric appliances to a single wall outlet.

• Otherwise, it may result in fire due to overheating of the wall outlet.

Plug the power plug in firmly.

• Otherwise, it may result in fire.

Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord.

• Otherwise, it may result in electric shock or fire due to a damaged power cord.

If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth.

• Otherwise, it may result in fire.

Major Safety Precautions 1-3

Caution

Avoid unplugging the power plug while the product is operating.

• Otherwise, it may damage the product due to electric shock.

When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord.

• Otherwise, it may result in electric shock or fire.

Installation Related

Warning

Avoid placing burning candles, mosquitorepellent or cigarettes on the product and installing the product near a heater.

• Otherwise, it may result in fire.

Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet.

• Otherwise, it may result in fire due to internal over-heating.

Keep the plastic bags used to pack the product away from children.

• If children place the plastic bags over their heads, they may suffocate.

Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance.

• Otherwise, it may result in electric shock or fire.

Connect the power plug to a wall outlet that can be easily reached.

• When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product.

Ask an installation engineer or relevant company to install the product onto the wall.

• Otherwise, it may result in injury.

• Make sure to use the specified wall mount.

Keep a distance of at least 10 cm from the wall when installing the product for ventilation.

• Otherwise, it may result in fire due to internal over-heating.

Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf.

• The product may fall and this may result in damage to the product or injury.

• If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire.

1-3 Major Safety Precautions

Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle.

• This may result in electric shock or fire.

Avoid installing the product at an easily reachable height where children may reach it.

• If a child touches the product, the product may fall and this may result in injury.

• Since the front part is heavier, install the product on a flat and stable surface.

Caution

Do not let the product drop while moving it.

• This may result in a problem with the product or injury.

When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf.

• Otherwise, this may cause the product to fall off and result in a malfunction or injury.

• Make sure to use a cabinet or shelf suitable to the size of the product.

If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter.

• Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time and so on.

Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater.

• This may shorten the product life cycle or cause fire.

Do not place the product face down on the floor.

• This may damage the panel of the product.

When putting the product down, handle it gently.

• Otherwise, it may result in a problem with the product or injury.

Cleaning Related

Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recommended cleansing agent only.

You can purchase the recommended cleansing agent from a service center.

Major Safety Precautions 1-3

Before cleaning the product, unplug the power cord.

• Otherwise, it may result in electric shock or fire.

Caution

Avoid spraying cleansing agent directly onto the product.

• This may result in discoloration or cracking of the exterior of the product or the panel coming off.

Use a soft, damp cloth with a "monitorexclusive cleansing agent" and wipe the product with it.

• If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product.

Usage Related

Warning

Since a high voltage runs through the product, never disassemble, repair or modify the product yourself.

• Otherwise, it may result in fire or electric shock.

• If the product needs to be fixed, contact a service center.

If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service center.

• Otherwise, it may result in electric shock or fire.

If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service center.

• Otherwise, it may result in fire or electric shock.

1-3

When cleaning the product, do not spray water directly over the product parts.

• Make sure that water does not enter the product.

• Otherwise, it may result in fire, electric shock or a problem with the product.

When cleaning the product, disconnect the power cord and clean the product with a soft dry cloth.

• Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product.

This may result in the exterior being deformed or the print being removed.

Since the exterior of the product is easily scratched, be sure to use a proper cleansing cloth. Use the cleansing cloth with a small amount of water. However, if the cloth is contaminated by alien substances, it may result in scratches to the exterior; therefore shake off any alien substances from the cloth before using it.

When cleaning the product, do not spray water directly over the product parts.

• Make sure that water does not enter the product.

• Otherwise, it may result in fire, electric shock or a problem with the product.

Avoid letting children to hang or climb onto the product.

• Otherwise, it may result in the product falling and this may result in injury or death.

Avoid placing objects such as toys and cookies on top of the product.

• If a child hangs over the product to grab an object, the object or the product may fall and this may result in injury or even death.

Major Safety Precautions

When thunder or lighting occurs, unplug the power cord and under no circumstance touch the antenna cable as this is dangerous.

• Otherwise, it may result in electric shock or fire.

Avoid moving the product by pulling the power cord or antenna cable.

• Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.

Avoid lifting up or move the product by holding only the power cord or signal cable.

• Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.

Take care not to block the vent by a table cloth or curtain.

• Otherwise, it may result in fire due to internal overheating.

Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmetics or drugs, or a metal object over the product.

• If water or an alien substance enters the product, turn the power off, unplug the power cord and contact a service center.

• Otherwise, it may result in a problem with the product, electric shock or fire.

Caution

Displaying a still image for a long time may create a persistent image or stain on the screen.

• If you do not use the product for a long time, use the power-saving mode or set the screensaver to the moving picture mode.

Set the appropriate resolution and frequency for the product.

• Otherwise, it may result in eye strain.

Major Safety Precautions

Avoid dropping an object over the product or cause impact to the product.

• Otherwise, it may result in electric shock or fire.

When a gas leak occurs, do not touch the product or the power plug and ventilate immediately.

• A spark may result in an explosion or fire.

• During a thunder or lighting storm, do not touch the power cord or antenna cable.

Avoid using or placing inflammable spray or objects near the product.

• This may result in an explosion or fire.

Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc).

• If water or an alien substance enters the product, turn the power off, unplug the power cord and contact a service center.

• Otherwise, it may result in a problem with the product, electric shock or fire.

When not using the product for a long time such as leaving your home, unplug the power cord from the wall outlet.

• Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock.

Avoid turning the product upside down or move the product holding only the stand.

• This may cause the product to fall resulting in damage to the product or injury.

1-3

Watching the product from too close a distance continuously may damage your eyesight.

It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time.

• This will alleviate any eye strain.

Keep small accessories away from the children.

Avoid using a humidifier or cooker near the product.

• Otherwise, it may result in electric shock or fire.

Since the display panel is hot after using it for a long time, do not touch the product.

Take care when adjusting the angle of the product or the height of the stand.

• If your hand or finger is caught, you may be injured.

• If the product is tilted excessively, the product may fall and this may result in injury.

Avoid placing a heavy object over the product.

• Otherwise, it may result in a problem with the product or injury.

Maintaining the Correct Posture when Using this Product

Maintain the correct posture when using this product.

• Straighten your back.

• Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and face the screen forwards.

• Maintain the correct posture when using this product.

• Adjust the angle of the product so that light is not reflected onto the screen.

• Keep your elbow at a right angle and keep your arm level with the back of your hand.

• Keep your elbow at a right angle.

• Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart.

1-3 Major Safety Precautions

2 Installing the Product

2-1 Package Contents

• Unpack the product and check if all of the following contents have been included.

• Store the packaging box in case you need to move the Product at a later stage.

Monitor

CONTENTS

Installation Manual Product Warranty User Manual D-Sub Cable

Power Cord

Stand

Cleaning Cloth

OPTIONAL PARTS

Cable Holder Stand Connector

DVI Cable

The cleaning cloth is supplied with black high-glossy models only.

Installing the Product 2-1

2-2 Installing the Stand

Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.

Insert the Stand Connector into the Stand in the direction shown by the figure.

Check if the Stand Connector is firmly connected.

Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.

Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards.

Hold the main body of the product with your hand as shown by the figure.

Push the assembled stand into the main body in the direction of the arrow as shown in the figure.

2-2 Installing the Product

- Caution

Do not lift the product holding only the stand

Installing the Product 2-2

2-3 Removing the Stand

Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards.

Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards.

Hold the main body of the product with your hand as shown by the figure.

Pull the stand in the direction of the arrow as shown in the figure to separate it.

Turn the connecting screw at the bottom of the stand to separate it.

Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as shown in the figure.

2-3 Installing the Product

2-4 Installing the Stand for the Wall Mount

This product provides a stand mount of 75 mm x 75 mm that complies with the VESA specifications.

A. Stand Mount

B. Stand (Optional)

1. Turn the product off and unplug the power cord from the wall outlet.

2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards.

3. Separate the stand.

4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.

• If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.

• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications.

• Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive force.

This may result in damage to the product or injury due to the product falling.

The company shall not be held liable for any damage or injury.

• The company shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation engineer.

• When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the wall.

• The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications.

• Use the wall mount according to the international specifications.

Installing the Product 2-4

2-5 Connecting with a PC

The connecting part may differ depending on the product model.

1. Connect the product to a PC depending on the video output supported by the PC.

• When the graphics card provides D-Sub (analog) output

• Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.

• When the graphics card provides DVI (digital) output

• Connect the [DVI IN] port of the product to the DVI port of the PC with the DVI cable.

2. Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the

220V or 110V wall outlet.

(The input voltage is switched automatically.)

2-5

When the product is connected to a PC, you can turn the product on and use it.

When both the DVI (<Digital>) and D-Sub (<Analog>) cables are connected, you can select the input signal <Analog/

Digital> by pressing the button.

Installing the Product

2-6 Kensington Lock

Kensington Lock

A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.

Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.

Locking the product

1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking direction.

2. Connect the Kensington lock cable.

3. Tie the Kensington lock cable to a desk or heavy object.

You can purchase the locking device from an electronics store, an online shop, or our service center.

Installing the Product 2-6

3 Using the product

3-1 Setting the Optimal Resolution

If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.

Select a language and the optimal resolution.

▲/▼ : You can select a language with these buttons.

MENU : If you press this button, the message disappears.

• The message appears up to 3 times if the resolution has not been set to the optimal resolution.

• To set the resolution to the optimal resolution

• When the PC is turned off, connect the product and the PC and turn the power on.

• Right-click over the Desktop and select 'Properties' from the pop-up menu.

• In the 'Settings' tab, set the resolution to the optimal resolution.

3-1 Using the product

3-2 Standard Signal Mode Table

The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike for a CDT monitor.

Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.

If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.

Therefore, configure it as follows referring to the User Manual of the graphics card.

P2250W

DISPLAY MODE

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 800

VESA, 1280 x 800

VESA, 1280 x 960

VESA, 1280 x 1024

VESA, 1280 x 1024

VESA,1680 x 1050

HORIZONTAL

FREQUENCY (KHZ)

35.156

37.879

48.077

46.875

48.363

56.476

60.023

67.500

31.469

31.469

35.000

49.726

68.681

37.861

37.500

49.702

62.795

60.000

63.981

79.976

64.674

VERTICAL

FREQUENCY (HZ)

56.250

60.317

72.188

75.000

60.004

70.069

75.029

75.000

59.940

70.087

66.667

74.551

75.062

72.809

75.000

59.810

74.934

60.000

60.020

75.025

59.883

PIXEL CLOCK

(MHZ)

36.000

40.000

50.000

49.500

65.000

75.000

78.750

108.000

25.175

28.322

30.240

57.284

100.000

31.500

31.500

83.500

106.500

108.000

108.000

135.000

119.000

SYNC POLARITY (H/V)

-/-

-/-

+/+

+/+

+/+

+/+

+/+

+/+

-/-

-/-

-/-

-/-

-/-

-/+

-/-

-/+

-/+

+/+

+/+

+/+

+/-

Horizontal Frequency

The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.

Vertical Frequency

A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This frequency is called the vertical frequency. The vertical frequency is represented in Hz.

Using the product 3-2

3-3 Installing the Device Driver

If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or

Samsung Electronics website(http://www.samsung.com/), and download the driver.

1. Insert the driver installation CD-ROM into the CD-ROM drive.

2. Click on "Windows Driver".

3. Select the model of your product from the model list.

4. Complete the remaining installation steps according to the instructions displayed on the screen.

5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system.

3-3 Using the product

3-4 Product Operating Buttons

Product Operating Buttons

Touch one of the operating buttons lightly.

The LED buttons appear.

ICON

MENU

▲/▼

DESCRIPTION

Press this button to view the On Screen Display (OSD).

This button is also used to exit the OSD or to return to a higher-level OSD menu

* OSD Adjustment Lock

This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person

On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated.

Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment

Lock function is disabled.

Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ].

Use these buttons to navigate the menu or to adjust a value in the OSD.

Users can set the Customized Key to one of the following functions. If the user presses the

Customized Key[ ] after setting it, the configured function will be performed

<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>

You can set the function of the Customized Key by selecting "SETUP&RESET ->

Customized Key" in the OSD.

Use this button to control the brightness of the screen.

Use this button to select a function.

If you press the [ ] button when there is no OSD, the input signal (analog/digital) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen.)

To select digital mode, you have to connect the product and the PC with the DVI cable.

Using the product 3-4

ICON

AUTO

DESCRIPTION

Press [AUTO] button to adjust the screen settings automatically

This function is only available in analog mode.

If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed.

Press this button to turn the product on or off

• The buttons on the right of the product are touch-type buttons.

• Touch the buttons lightly with your finger.

Power LED

This LED is turned on when the product works normally.

For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption.

3-4 Using the product

3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)

The Screen Adjustment Menu (OSD: On Screen Display) Structure

TOP MENUS

PICTURE

COLOR

Brightness

Fine

MagicColor

Color Effect

H-Position

Contrast

Response Time

Red

Gamma

V-Position

SUB MENUS

Sharpness

Green

Image Size

SIZE & POSI-

TION

SETUP&RESET

Reset

Off Timer On/Off

Customized Key

Menu Transparency

Off Timer Setting

Language

Auto Source

INFORMA-

TION

MagicBright

Blue

Coarse

Color Tone

Menu H-Position Menu V-Position

LED On/Off

PC/AV Mode

LED Brightness

Display Time

PICTURE

MENU

Brightness

Contrast

Sharpness

DESCRIPTION

Controls the screen brightness.

This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.

Controls the contrast of the pictures displayed on the screen

This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

Controls the clarity of details of pictures displayed on the screen

This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

Using the product 3-5

MENU

MagicBright

Coarse

Fine

Response Time

DESCRIPTION

Provides preset picture settings optimized for various user environments such as editing a document, surfing the Internet, playing games, watching sports or movies and so on.

• <Custom>

If the preset picture modes are not sufficient, users can configure the <brightness> and

<Contrast> directly using this mode.

• <Text>

This mode provides the picture setting appropriate for editing a document.

• <Internet>

This mode provides the picture setting appropriate for surfing the Internet (text + picture).

• <Game>

This mode provides the picture setting appropriate for playing games that include lots of graphics and that require a fast screen refresh rate.

• <Sport>

This mode provides the picture setting appropriate for watching sports games that include lots of movement.

• <Movie>

This mode provides brightness and sharpness settings similar to those of a TV for the best entertainment environment (movie, DVD, etc.).

• <Dynamic Contrast>

Controls the picture contrast automatically so that bright and dark pictures are balanced overall.

Removes vertical noise lines (line pattern) from the screen.

The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu.

This function is only available in analog mode.

Removes horizontal noise lines (line pattern) from the screen.

If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again.

This function is only available in analog mode.

Accelerates the response time of the LCD panel faster than the original response time so that moving pictures appear sharper and more natural.

• <Normal>

• <Faster>

• <Fastest>

It is recommended setting the Normal or Faster when not viewing a movie.

COLOR

3-5 Using the product

MENU

MagicColor

Red

Green

Blue

Color Tone

Color Effect

Gamma

DESCRIPTION

Expresses natural colors more clearly without changing the picture quality using proprietary digital picture quality improvement technology developed by Samsung Electronics.

• <Off> - Turns the MagicColor function off.

• <Demo> - You can compare the pictures processed by MagicColor with the original pictures.

• <Full> - Provides a clearer picture including areas corresponding to skin color.

• <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color.

You can adjust the red color value of pictures according to your preference.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

You can adjust the green color value of pictures according to your preference.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

You can adjust the blue color value of pictures according to your preference.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

You can set the color temperature according to your preference.

• <Cool> - Sets the color temperature of the screen to a cooler color.

• <Normal> - Sets the color temperature of the screen to the standard color temperature.

• <Warm> - Sets the color temperature of the screen to a warmer color.

• <Custom> - Select this menu to set the color temperature manually.

If you do not like the preset color temperatures, you can manually adjust the colors of <Color

Effect>.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

You can change the overall atmosphere by changing the color of pictures.

This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.

• <Off> - Turns the color effect function off.

• <Grayscale> -Displays pictures in black and white.

• <Green> - Displays pictures in green mono color.

• <Aqua> - Displays pictures in aqua mono color.

• <Sepia> - Displays pictures in sepia mono color.

Using this menu, you can change the intensity of the colors of medium brightness.

(This is unavailable when MagicBright is set to <Dynamic Contrast> mode.)

SIZE & POSITION

Using the product 3-5

MENU

H-Position

V-Position

Image Size

Menu H-Position

Menu V-Position

SETUP&RESET

DESCRIPTION

Moves the position of the display area on the screen horizontally.

This function is only available in analog mode.

Moves the position of the display area on the screen vertically.

This function is only available in analog mode.

PC signals

• <Auto> - The picture is displayed at the aspect ratio of the input signal.

• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.

• A signal not in the standard mode table is not supported.

• If the resolution is set to the optimal resolution, the aspect ratio does not change whether the <Image Size> is set to <Auto> or <Wide>.

AV signals

• <4 : 3> - Displays pictures at the 4 : 3 aspect ratio.

• <16 : 9> - Displays pictures at the 16 : 9 aspect ratio.

• <Screen Fit> - If a 720P, 1080i or 1080P signal is input in DVI input mode, the picture is displayed as is without truncation.

• This can only be set when the external input is connected through DVI and <PC/AV Mode> is set to <AV>.

You can adjust the horizontal position of the OSD.

You can adjust the vertical position of the OSD.

Reset

MENU

Menu Transparency

DESCRIPTION

Use this function to restore the visual quality and color settings to the factory defaults.

• <No> - <Yes>

You can select the transparency of the OSD.

• <Off> - <On>

3-5 Using the product

MENU

Language Select a language for the OSD.

DESCRIPTION

LED On/Off

LED Brightness

Off Timer On/Off

Off Timer Setting

Auto Source

PC/AV Mode

Display Time

Customized Key

The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC.

Turns the Menu button LED on or off.

• <Off> - Turns the Power button LED lamp off.

• <On> - Turns the Power button LED lamp on.

Adjusts the brightness of the Menu button LED in levels.

You can turn the Off Timer on or off.

• <Off> - <On>

Turns the power off automatically when the configured time is reached.

• <Auto> - The monitor automatically selects an input signal.

• <Manual> - Users have to manually select an input signal.

Set to PC when connected to a PC.

Set to AV when connected to an AV device.

This function does not support analog mode.

The OSD automatically disappears if no action is taken by the user.

You can determine the time to wait before the OSD is hidden.

• <5 sec> - <10 sec> - <20 sec> - <200 sec>

You can set the function of the Customized Key to one of the following.

• <MagicBright> - <MagicColor> - <Color Effect> - <Image Size>

INFORMATION

MENU

INFORMATION

DESCRIPTION

Shows the frequency and resolution set on the PC.

Using the product 3-5

4 Installing the Software

4-1 Natural Color

What is Natural Color ?

This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).

The Natural Color is provided online. You can download it from the website below and install; http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html

4-1 Installing the Software

4-2 MagicTune

What is MagicTune?

MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines.

Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.

Installing the Software

1. Insert the installation CD into the CD-ROM drive.

2. Select the MagicTune setup program.

If the pop-up screen for the software installation does not appear on the main screen, find and double-click the

MagicTune setup file on the CD-ROM.

3. Select the installation language and click [Next].

4. Complete the remaining software installation steps according to the instructions displayed on the screen.

• The software may not work properly if you do not restart the computer after the installation.

• The MagicTune icon may not appear depending on the computer system and the product specifications.

• If the shortcut icon does not appear, press the F5 key.

Restrictions and Problems with the Installation (MagicTune™)

The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment.

System Requirements

OS

• Windows 2000

• Windows XP Home Edition

• Windows XP Professional

• Windows Vista

For MagicTune™, Windows 2000 or later is recommended.

Hardware

• At least 32MB of memory

• At least 60MB of free space on the hard disk drive

For more information, refer to the website.

Removing the Software

You can only remove MagicTune™through [Add or Remove Programs ] in Windows.

To remove MagicTune™, complete the following steps.

1. Click [Start] select [Settings], and select [Control Panel] from the menu.

For Windows XP, click [Start], and select [Control Panel] from the menu.

2. Double-click the [Add or Remove Programs] icon in the Control Panel.

3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.

Installing the Software 4-2

4. Click [Change or Remove Programs] to remove the software.

5. Select [Yes] to start removing MagicTune™.

6. Wait until a message box appears informing you that the software has been removed completely.

For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, please visit our website.

4-2 Installing the Software

4-3 MultiScreen

What is MultiScreen ?

MultiScreen enables users to use the monitor by partitioning multiple sections.

Installing the Software

1. Insert the installation CD into the CD-ROM drive.

2. Select the MultiScreen setup program.

If the pop-up screen for the software installation does not appear on the main screen, find and double-click the

MultiScreen setup file on the CD-ROM.

3. When the Installation Wizard appears, click [Next].

4. Complete the remaining software installation steps according to the instructions displayed on the screen.

• The software may not work properly if you do not restart the computer after the installation.

• The MultiScreen icon may not appear depending on the computer system and the product specifications.

• If the shortcut icon does not appear, press the F5 key.

Restrictions and Problems with the Installation (MultiScreen)

The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.

Operating System

OS

• Windows 2000

• Windows XP Home Edition

• Windows XP Professional

• Windows Vista

For MultiScreen, the operating systems Windows 2000 or later is recommended.

Hardware

• At least 32MB of memory

• At least 60MB of free space on the hard disk drive

Removing the Software

Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].

Select MultiScreen from the program list and click the [Add/Delete] button.

Installing the Software 4-3

5 Troubleshooting

5-1 Monitor Self-Diagnosis

• You can check if the product is working properly using the Self-Diagnosis function.

• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below.

1. Turn the product and the PC off.

2. Separate the D-Sub cable from the product .

3. Turn the product on.

4. If the product is working properly, the 'Check Signal Cable' message appears.

In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product is working properly.

5-1 Troubleshooting

5-2 Before Requesting Service

Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest

Samsung Electronics Service Center.

A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON

Is the power cord connected properly?

Is the “Check Signal Cable” message displayed on the screen?

Is the “Not Optimum Mode” message displayed on the screen?

Is a blank screen displayed and does the power LED blink at a 1 second interval?

Did you connect with a DVI cable?

Check the connection status of the power cord.

Check the cable connecting the PC and the product.

If the message appears on the screen even if the cable is properly connected, recheck the input signal by pressing the

button of the product.

This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product.

In this case, set up the appropriate resolution and the frequency for the product.

This occurs when the power saving function is running.

If you click the mouse or press any key, the screen will be turned on.

If you connect the DVI cable when the PC has booted up or if you reconnect the DVI cable after disconnecting the cable while using a PC, the screen may not be displayed because some graphics cards do not output the video signal.

In this case, reboot the PC while the DVI cable is connected.

THE ON SCREEN ADJUSTMENT MENU (OSD) DOES NOT APPEAR.

Did you cancel the screen adjustment?

Check if the <OSD Adjustment Lock> function is set to Off.

THE COLOR IS WEIRD / THE PICTURE IS DISPLAYED IN BLACK AND WHITE

Is the entire screen displayed in the same color as if viewing the screen through a cellophane paper?

Is the graphics card configured correctly?

Check the cable connection to the computer.

Reinsert the graphics card into the computer completely.

Check if the <Color Effect> is set to <Off>.

Set up the graphics card referring to the user manual.

THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER.

Did you change the graphics card or the driver?

Did you change the resolution and frequency appropriate to the product?

Is the graphics card configured correctly?

Please press the [AUTO] button to run the auto adjustment function.

Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table)

Set up the graphics card referring to the user manual.

THE PICTURES ARE OUT-OF-FOCUS.

Did you change the resolution and the frequency appropriate to the product?

Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table)

Troubleshooting 5-2

THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE

GRAPHICS CARD.

Did you install the device driver for the product?

Is the graphics card configured correctly?

Windows ME/XP/2000 : Set the color again by selecting Control Panel → Display → Settings.

Configure the color again in accordance with the new graphics card driver.

WHEN I CONNECT THE MONITOR, THE 'UNKNOWN MONITOR, PLUG&PLAY (VESA DDC) MONITOR FOUND'

MESSAGE IS DISPLAYED.

Did you install the device driver for the product?

Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card.

Install the device driver referring to the descriptions about the driver installation.

Install the device driver referring to the descriptions about the driver installation.

WHEN I LOOK AT THE EXTERIOR EDGES OF THE PRODUCT, SMALL ALIEN SUBSTANCES APPEAR ON IT.

Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges, such things may be seen. This is not a defect of the product.

A “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTER.

If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.

5-2 Troubleshooting

5-3 FAQ

FAQ!

How can I change the frequency of the video signal?

How can I change the resolution?

How can I use the power saving function?

PLEASE TRY THE FOLLOWING!

You have to change the frequency of the graphics card.

(For more information, refer to the User Manual of the computer or the graphics card.)

Windows XP : Change the resolution by selecting Control

Panel → Appearance and Themes → Display → Settings.

Windows ME/2000 : Change the resolution by selecting Control Panel → Display → Settings.

(For more information, refer to the User Manual of the computer or the graphics card.)

Windows XP : Configure it by selecting Control Panel →

Appearance and Themes → Display → Screen Saver Setting or configure it in the BIOS Setup of the computer.

Windows ME/2000 : Configure it by selecting Control Panel →

Display → Screen Saver Setting or Configure it in the BIOS

Setup of the computer.

For more information, refer to the Windows user manual for the computer.

Troubleshooting 5-3

6 More Information

6-1 Specifications

LCD Panel

Synchronization

Display Color

Resolution

Input Signal, Terminated

Maximum Pixel Clock

Power Supply

Signal Cable

MODEL NAME

Size

Display area

Pixel Pitch

Horizontal

Vertical

Optimum resolution

Maximum resolution

Dimensions (WxHxD) / Weight (Simple stand)

Environmental considerations

VESA Mounting Interface

Operating

Storage

P2250W

22 inch (55 cm)

473.76 mm (H) X 296.1 mm (V)

0.282 mm (H) X 0.282 mm (V)

30~81 kHz

56~75 Hz

16.7M

1680 X 1050 @ 60 Hz

1680 X 1050 @ 60 Hz

RGB Analog, DVI(Digital Visual Interface)

0.7 Vp-p ± 5 %

Separate H/V sync, Composite,

TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)

164 MHz (Analog, Digital)

This product supports 100 – 240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product.

15pin-to-15pin D-sub cable, Detachable

DVI-D to DVI-D connector, Detachable

519.5 x 356.0 x 63 mm / 20.5 x 14.0 x 2.5 inch

(Without Stand)

519.5 x 425.0 x 189.4 mm / 20.5 x 16.7 x 7.5 inch /

5.4kg / 11.9 Ibs (With Stand)

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

75mm (H) x 75 mm (V) / 2.9 inches x 2.9 inches

Class B (Information Communication equipment for residential use)

This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

6-1 More Information

6-2 Power Saving Function

This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a different color to indicate that the product is in power saving mode. When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides the power saving function.

STATE

Power Indicator

Power Consumption

NORMAL OPERATION

On

40 watts

POWER SAVING MODE

Blinking

Less than 1 watts

POWER OFF

Off

Less than 1 watts

If there is no power cut-off switch, the power consumption is "0" only when the powr cord is disconnected.

More Information 6-2

6-3 Contact SAMSUNG WORLDWIDE

• If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

U.S.A

CANADA

MEXICO

NORTH AMERICA

1-800-SAMSUNG(726-7864)

1-800-SAMSUNG(726-7864)

01-800-SAMSUNG(726-7864) http://www.samsung.com/us http://www.samsung.com/ca http://www.samsung.com/mx

ARGENTINA

BRAZIL

CHILE

COLOMBIA

COSTA RICA

ECUADOR

EL SALVADOR

GUATEMALA

HONDURAS

JAMAICA

NICARAGUA

PANAMA

PUERTO RICO

REP. DOMINICA

TRINIDAD & TOBAGO

VENEZUELA

LATIN AMERICA

0800-333-3733

0800-124-421

4004-0000 http://www.samsung.com/ar http://www.samsung.com/br

800-SAMSUNG(726-7864) http://www.samsung.com/cl

01-8000112112 http://www.samsung.com/co

0-800-507-7267

1-800-10-7267 http://www.samsung.com/latin http://www.samsung.com/latin

800-6225

1-800-299-0013 http://www.samsung.com/latin http://www.samsung.com/latin

800-7919267 http://www.samsung.com/latin

1-800-234-7267 http://www.samsung.com/latin

00-1800-5077267

800-7267

1-800-682-3180

1-800-751-2676

1-800-SAMSUNG(726-7864)

0-800-100-5303 http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin

AUSTRIA

BELGIUM

CZECH REPUBLIC

EUROPE

0810 - SAMSUNG(7267864,€ 0.07/min) http://www.samsung.com/at

02 201 2418

800 - SAMSUNG (800-726786) http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr

(French) http://www.samsung.com/cz

DENMARK

EIRE

FINLAND

FRANCE

GERMANY

6-3

8 - SAMSUNG (7267864)

0818 717 100

30 - 6227 515

01 4863 0000

01805 - SAMSUNG (7267864,€ 0.14/

Min) http://www.samsung.com/dk http://www.samsung.com/ie http://www.samsung.com/fi http://www.samsung.com/fr http://www.samsung.de

More Information

BELARUS

ESTONIA

LATVIA

LITHUANIA

MOLDOVA

KAZAKHSTAN

KYRGYZSTAN

RUSSIA

TADJIKISTAN

UKRAINE

UZBEKISTAN

HUNGARY

ITALIA

LUXEMBURG

NETHERLANDS

NORWAY

POLAND

PORTUGAL

SLOVAKIA

SPAIN

SWEDEN

SWITZERLAND

U.K

AUSTRALIA

CHINA

HONG KONG

INDIA

INDONESIA

JAPAN

More Information

EUROPE

06-80-SAMSUNG(726-7864)

800-SAMSUNG(726-7864)

02 261 03 710

0900 - SAMSUNG (0900-7267864) (€

0.10/Min)

3 - SAMSUNG (7267864)

0 801 1SAMSUNG (172678)

022 - 607 - 93 - 33

808 20 - SAMSUNG (7267864)

0800-SAMSUNG(726-7864)

902 - 1 - SAMSUNG (902 172 678)

0771 726 7864 (SAMSUNG)

0848-SAMSUNG(7267864, CHF 0.08/ min)

0845 SAMSUNG (7267864)

CIS

810-800-500-55-500

800-7267

8000-7267

8-800-77777

00-800-500-55-500

8-10-800-500-55-500

00-800-500-55-500

8-800-555-55-55

8-10-800-500-55-500

8-800-502-0000 http://www.samsung.com/hu http://www.samsung.com/it http://www.samsung.com/lu http://www.samsung.com/nl http://www.samsung.com/no http://www.samsung.com/pl http://www.samsung.com/pt http://www.samsung.com/sk http://www.samsung.com/es http://www.samsung.com/se http://www.samsung.com/ch http://www.samsung.com/uk http://www.samsung.com/ee http://www.samsung.com/lv http://www.samsung.com/lt http://www.samsung.com/kz_ru http://www.samsung.ru

http://www.samsung.ua

http://www.samsung.com/ua_ru http://www.samsung.com/kz_ru 8-10-800-500-55-500

ASIA PACIFIC

1300 362 603

400-810-5858

010-6475 1880

3698 - 4698 http://www.samsung.com/au http://www.samsung.com/cn http://www.samsung.com/hk http://www.samsung.com/hk_en/ http://www.samsung.com/in 3030 8282

1800 110011

1-800-3000-8282

0800-112-8888

0120-327-527 http://www.samsung.com/id http://www.samsung.com/jp

6-3

MALAYSIA

NEW ZEALAND

PHILIPPINES

SINGAPORE

THAILAND

TAIWAN

VIETNAM

SOUTH AFRICA

TURKEY

U.A.E

ASIA PACIFIC

1800-88-9999

0800 SAMSUNG (0800 726 786)

1800-10-SAMSUNG(726-7864)

1800-3-SAMSUNG(726-7864)

1-800-8-SAMSUNG(726-7864)

02-5805777

1800-SAMSUNG(726-7864)

1800-29-3232

02-689-3232

0800-329-999

1 800 588 889

MIDDLE EAST & AFRICA

0860-SAMSUNG(726-7864)

444 77 11

800-SAMSUNG(726-7864)

8000-4726 http://www.samsung.com/my http://www.samsung.com/nz http://www.samsung.com/ph http://www.samsung.com/sg http://www.samsung.com/th http://www.samsung.com/tw http://www.samsung.com/vn http://www.samsung.com/za http://www.samsung.com/tr http://www.samsung.com/ae

6-3 More Information

6-4 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) -

Europe only

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

More Information 6-4

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 55.9 cm (22")
  • Full HD 1680 x 1050 pixels
  • 2 ms 300 cd/m² 1000:1
  • 40 W

Related manuals