Very small and compact design True bypass switch DC 9V adapter power supply Bass Filter Pedal Clean: Excellent dynamic envelope filter effect, unique vocal-like sounds. Fuzz: Add vintage fuzz tone into the sound. 6 8 OUTPUT Main Features Dynamic envelope filter pedal for both bass and guitar Unique Funky style filter tone, Clean and Fuzz sweeping switch Full metal shell Fuzz Clean INPUT Precautions PLEASE READ CAREFULLY BEFORE PROCEEDING Power Supply Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center minus. The maximum working voltage shall not exceed 12V, otherwise may be dangerous equipment damage, fire or other problems. Unplug the AC power adapter when not using or during electrical storms. Connections Always turn off the power of this and all other equipment before connecting or disconnecting, this will help prevent malfunction and / or damage to other devices. Also make sure to disconnect all connection cables and the power cord before moving this unit. Cleaning Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths. Interference with other electrical devices Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions. Location To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions: Heat sources Direct sunlight Extreme temperature or humidity Magnetic fields High humidity or moisture Excessive dusty or dirty location Strong vibrations or shocks FCC certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 3 1. TRUE BYPASS Footswitch: Push down the footswitch to toggle between on and bypass status. 7 2. ON/OFF LED: RANGE Shows the on/off status of SWEEPER , when the LED is lit the effect is engaged. 9 4 3. DC IN Power Jack: For power supply, use a 9-volt DC regulated AC adapter (plug INTENSITY polarity is positive on the barrel and negative in the center). 5 4. INPUT Jack: 1/4” mono audio jack, for connecting guitar. 5. OUTPUT Jack: 1/4” mono audio jack, outputs the signal. 6. Mode Switch: Switch between Clean mode and Fuzz mode. 7. RANGE Knob: Adjusts the frequency range. 8. RESO Knob: Adjusts the internsity of resonance. 9. INTENSITY Knob: Adjusts the sensitivity of filter effects. DC IN Working Modes: 2 (Clean/Fuzz) Input: 1/4” monaural jack (impedance: 220k Ohms) Output: 1/4” monaural jack (impedance: 1.4k Ohms) Power Requirements: AC adapter 9V DC (center minus plug), recommended to use Mooer Micro Power Current Draw: 7 mA Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H) Weight: 160g Accessories: Owner’s Manual * Disclaimer: Any specification’s update won't be amended in this manual.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project