Wiring devices catalogue addendum

Wiring devices catalogue addendum
WIRING DEVICES
ADDENDUM
THE GLOBAL SPECIALIST
IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
Arteor
TM
and ZigBee*
radio technology
setting the standard for wireless installations
Arteor’s wireless range uses ZigBee - a widely
recognised international radio communication
standard - making it ideal for small, new installations
and refurbishment projects. In addition, it can be used
with the Arteor BUS system to increase the number of
control points within an existing installation.
Operating at a frequency of 2.4 GHz, Arteor ZigBee
wireless transmitters and receivers control lighting,
roller blinds and technical detectors, and provide
the added functionality of scenario control and
bi-directional communication between devices.
XX
* ZigBee Certified product – Manufacturer Specific Profile
SCENARIO CONTROL
LIGHTING CONTROL
INDIVIDUAL RECEIVER:
DIMMER SWITCH
(See p. 4)
Indicates the light
intensity via LEDs
4 SCENARIO CONTROL
(See p. 5)
For automation of
lighting etc
ROLLER BLIND CONTROL
INDIVIDUAL RECEIVER:
ROLLER BLIND SWITCH
(See p. 4)
Controls any type of electric
roller blind
From dimmer
Motor
N
N
B
A
NL
A
A + B
A
B
N
L
TECHNICAL ALARM
TECHNICAL
DETECTORS
(See p. 9)
Indicates
water or gas
leaks
A Indicates lighting control
B Indicates roller blind control
WIRING DEVICES
WWW.LEGRAND.CO.UK
CATALOGUE
ADDENDUM
1
ARTEOR
BUS/SCS technology
TM
unlocking functionality
NEW
Arteor’s BUS/SCS building automation system makes it easy to create
scenarios that incorporate multiple functions for large living areas
and commercial environments... simultaneously controlling lighting,
temperature, multimedia, video door entry and more.
SIMPLE SOPHISTICATION
With just 2 dedicated wires, Arteor BUS/SCS technology is simple to install,
yet its innovative design makes it sophisticated enough to meet the needs
of complex installations. What’s more, installations can be reconfigured and
reprogrammed without the need for rewiring.
2
DOOR ENTRY
SYSTEMS
SCENARIO
CONTROL
AUDIO AND VIDEO
DOOR ENTRY
(See p. 28)
Access control and
intercommunication
with other units
TEMPERATURE
CONTROL
SCENARIO CONTROL
(See p. 12)
For the activation
of up to 4 scenarios
ROLLER BLIND
CONTROL
CENTRAL
UNIT FOR
TEMPERATURE
CONTROL
(See p. 19)
Can manage up
to 99 zones
ROLLER BLIND
CONTROL
(See p. 12)
Controls any type of
electric roller blind
From actuators
M
Motor
N
230 VA
B
230 VA
BUS line
BUS line
27 V A
M
A
A
BUS line
BUS line
BUS line
A
Video display
Touch
Screen
B
A
B
A B
A Indicates lighting control
B Indicates roller blind control
HOME MANAGEMENT
SOUND
DISTRIBUTION
10’’ TOUCH SCREEN
(See p. 25)
Complete control of the automation
system, including:
- door entry system
- scenarios (multiple functions simultaneously)
- lighting, temperature, roller blinds
- multimedia distribution
- energy consumption
AMPLIFIER
(See p. 22)
Controls the volume
of ceiling speakers
in each room / zone
Choose the functions that meet the
demands of your installation... then
choose the finish that matches your
interior design scheme.
For the full range of matching Arteor
wiring accessories see p. 107
WIRING DEVICES
WWW.LEGRAND.CO.UK
CATALOGUE
ADDENDUM
3
ArteorTM Radio/ZigBee®
lighting and roller blind controllers/receivers
5735 45
0672 34
Replacement of key covers
by touch plates
0672 63
5735 46
p. 7
Support frame and surround plate selection charts p. 30-33
Load selection charts p. 10
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Receivers to be equipped with round or square key covers in white or black inish with magnesium buttons (p. 6),
2 module surround plates (p. 30-33) and 2 module support frames (p. 30-33)
Standard key covers can be replaced by touch plates (p. 7)
To be installed in lush mounting boxes min. depth 40 mm
Connect to the load and can be controlled by remote control transmitters, scenario switches, mobile control units and detectors (p. 5, 8, 9)
Pack
Cat.Nos
Lighting controllers/receivers (switches)
100/240 VA
Pack
Cat.Nos
Each active button on the receivers is identiied by
LED (blue LED indicator status supplied)
Switch without neutral – 300 W - 1 circuit
1
Each active button on the receivers is identiied by
LED (with blue LED bargraph)
Leading/trailing edge dimmer without neutral –
300 W
0672 31
1
NEW
1
5735 44
1
0672 33
1
0672 34
Lighting controllers/receivers (dimmers)
100/240 VA
0672 37
Switch without neutral – 2 x 300 W - 2 circuits
Supplied with support frame
Leading/trailing edge dimmer without neutral –
600 W
1
5735 46
Switch with neutral – 2 500 W - 1 circuit
NEW
1
5735 49
1
5735 47
1
5735 48
1
0672 63
Switch with neutral – 2 x 1 000 W - 2 circuits
Leading/trailing edge dimmer without neutral –
2 x 300 W
Supplied with support frame
Universal dimmer with neutral – 400 W
Switch with neutral – 3 x 1 000 W - 3 circuits
1
5735 45
0-10 V dimmers
Roller blind controllers/receivers – 100/240 VA
Selecting Arteor components
+
Support frame
+
+
Mechanism + Touch plate
or
+
Key cover + Surround plate
4
ZigBee ®: Certiied product Manufacturer Speciic Proile
ArteorTM Radio/ZigBee®
ArteorTM Radio/ZigBee®
lighting and roller blind transmitters
scenario controllers
0672 35
5738 70
5735 51
Surround plate selection charts p. 30-33
Replacement of key covers by touch plates p. 7
Technical information :
www.legrand.co.uk/arteor-building-automation
and follow the link to ‘Arteor project and technical guide’
Transmitters to be equipped with round or square key covers in white or
black inish with magnesium buttons (p. 6), 2 module surround plates
(p. 30-33) and multi-standard support frames (with removable ins) see
Cat. No. 5735 51(opposite)
Standard key covers can be replaced by touch plates (p. 7)
Surface mounting with direct ixing of support frame on wall
Control one or more Radio/ZigBee® receivers
No wiring needed. Supplied with batteries1
Pack
Cat.Nos
1
0672 35
1
0672 36
1
0672 39
Surround plate selection charts p. 30-33
Technical information :
www.legrand.co.uk/arteor-building-automation
and follow the link to ‘Arteor project and technical guide’
Pack
Cat.Nos
Wall mounting scenario controllers
To be equipped with round or square key covers in
white or black inish with magnesium buttons (p. 6),
2 module surround plates (p. 30-33) and
multi-standard support frames (with removable ins)
see Cat. No. 5735 51(below)
Standard rocker plates and surround plates can be
replaced by touch plates (p. 7)
Surface mounting with direct ixing of support frame
on wall
No wiring needed
Supplied with batteries1
4-scenario controllers
4 push buttons to control 4 scenarios (1 scenario
can control several functions: shutters, lighting...)
Lighting remote control transmitters
For 1 circuit switch controllers
For 2 circuit switch controllers
0882 32
1
0672 40
1
5735 51
For dimmer controllers
Multi-standard support frame
For scenario controllers, light and roller blind
transmitter Radio/ZigBee®
Roller blind control transmitters
For roller blind controllers
1
Mobile scenario controllers
0672 64
1
Selecting Arteor components
+
1
1 scenario can control several functions: lighting level
adjustment, roller blinds, general ON or OFF...
Pocket scenario controller
5738 70
4-scenario controller
For Radio/ZigBee ® installation
Supplied with batteries1
0882 32
Radio/ZigBee ® - IR remote control
5-scenario controller
Supplied with batteries1
+
Support frame + Mechanism + Touch plate
or
+
Key cover
1 : Battery life 5 years
+
Surround plate
ZigBee ®: Certiied product Manufacturer Speciic Proile
1 : Battery life 5 years
5
ArteorTM Radio ZigBee®
lighting control, automation and scenario key covers – selection chart
NEW
5745 58
5745 61
5745 67
NEW
5745 96
NEW
5745 80
5745 82
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
n Selection chart for round and square key covers
Key covers are available in round or square versions, in white or black inish with magnesium buttons
Use in conjunction with surround plates to complete your installation (p. 30-33)
ROUND VERSION
NEW
SQUARE VERSION
Key cover description
White
Black
White
Black
Lighting switch 1 circuit
5745 55
5745 56
5745 73
5745 74
Lighting switch 2 circuits
5745 57
5745 58
5745 75
5745 76
Lighting switch 3 circuits
5745 59
5745 60
5745 96
5745 97
Lighting dimmer with
blue LED bargraph
5745 61
5745 62
-
-
Lighting dimmer without
blue LED bargraph
5745 63
5745 64
5745 81
5745 82
Lighting dimmer 2 circuits with
blue LED bargraph
5745 65
5745 66
5745 79
5745 80
Roller blind control
5745 67
5745 68
5745 83
5745 84
4 scenario controller
5745 69
5745 70
5745 77
5745 78
False key cover
5745 71
5745 72
5745 85
5745 86
ZigBee ®: Certiied product Manufacturer Speciic Proile
6
ArteorTM Radio/ZigBee®
touch plates – selection chart
5737 51
5737 54
5737 64
5737 91
5737 69
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
n Selection chart for touch plates
Touch plates are available in white or black and can be used instead of key covers and surround plates
Touch plates
Associate mechanisms
Function
Touch control switch
1 circuit
Touch control switch
2 circuits
Touch control switch
3 circuits
Colour
BS ixing centres
White
5737 50
Black
5737 51
White
5737 54
Black
5737 55
White
5737 64
Black
5737 65
White
5737 58
Black
5737 59
White
5737 68
Black
5737 69
White
5737 90
Black
5737 91
Remote control
transmitter
0672 31
0672 35
0672 39
0672 34
0672 36
5735 45
Touch control dimmer
1 circuit
Touch control roller
blinds switch
1 circuit
Control mechanism
(receiver)
4-scenario touch control
0672 37
5735 46
5735 47
0672 39
0672 63
0672 64
0672 40
ZigBee ®: Certiied product Manufacturer Speciic Proile
7
ArteorTM Radio/ZigBee®
other functions
Technical detectors see
Wiring devices catalogue
0883 05
5738 62
Support frames and surround plates selection charts p. 30-33
Loads selection chart p. 10
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
Cat. Nos.
Water heater switches – receivers
Pack
Cat. Nos.
Can be activated by any other radio device
Receivers to be equipped with round or square
key covers in white or black inish with magnesium
buttons (p. 6), 2 module surround plates (p. 30-33)
and 2 module support frames (p. 30-33)
To be installed in lush mounting boxes –
min. depth 40 mm
1
Radio/ZigBee ® micromodule switch
1 output – 300 W
Enables control points to be added to improve an
existing installation without damage to the walls
Controls energy-saving, LED, halogen and
incandescent bulbs
Suitable for itting on DCL (lighting appliance)
covers. Its receiver function is used to execute
commands received from scenario switches,
centralised control units, detectors
Phase/neutral power supply
5735 50
1
0883 05
BUS/SCS-Radio/ZigBee ® Arteor gateways
To be equipped with round or square key covers in
white or black inish with magnesium buttons (p. 6)
and 2 module surround plates (p. 30-33)
To be installed in lush mounting boxes –
min. depth 40 mm
Used to link a BUS/SCS installation and an
additional Radio/ZigBee ® installation
Used to control up to 32 transmitters
1
1
Connect directly to an existing 2P + E socket to
switch the light connected to the socket
Its receiver function is used to execute commands
received from scenario switches, centralised control
units, detectors, etc
Radio/ZigBee ® mobile dimmer switch-sockets
500 VA
2 lighting levels (factory-preset and modiiable by
the user)
0883 20
British standard
1
Radio/ZigBee ® switch-sockets
10 A
0883 23
British standard
0672 50
Transmitter with auxiliary inputs
1
Transmitter/receiver mobile sockets
0883 31 Can be used to initiate ON/OFF on closing or
opening of a volt-free contact
For controlling a Radio/ZigBee® installation using
commercially available detectors (eg light sensitive
switch, moisture sensor)
Fits behind a traditional switch, without damage to
the walls, to control a Radio/ZigBee® switch
Transmitter/receiver control units for false
ceiling – 100-240 VA
Its receiver function is used to execute, on its
circuits, on/off commands received from centralised
control units, scenario switches, mobile control units
and detectors
Universal switch – phase/neutral
1 output – 2 500 W
1
5738 62
1
Dimmer for all loads (excluding luorescent and
LEDs) – without neutral
5738 64
1 output – 600 W
1
5738 66
Dimmer for 1-10 V ballast – phase/neutral
1 output – 500 VA
ZigBee ®: Certiied product Manufacturer Speciic Proile
8
ArteorTM Radio/ZigBee®
other functions (continued)
0672 33
0882 91
0883 27
Plexo lush and surface mounting
boxes, see Wiring devices catalogue
Support frames and surround plates selection charts p. 30-33
Loads selection chart p. 10
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
Cat. Nos.
Weatherproof (Plexo) radio transmitter/
receiver switch
1
0695 03
2 500 W
Its transmitter function allows it to control
another lighting Radio/Zigbee ® receiver
switch
Its receiver function is used to execute commands
received from centralised control units, scenario
switches, mobile control units and detectors
3 wire installation in box depth 40 mm min.
Pack
Cat. Nos.
Indoor motion detector
1
0882 91
Used to control a scenario by detecting
movement, especially switching on lights
automatically to create an illuminated
pathway (from the bedroom to the WC for
example)
Infrared detection (range 11 m, time delay between
3 and 60 min, detection angle : 85°, light level
threshold between 20 and 1 000 lux)
Set by mobile conigurators Cat. Nos. 0882 30/35
(see Wiring devices catalogue)
Supplied with ixing base
Detection at night only or night and day
Wall mount at desired location
2 AA batteries
1
0883 30 IP 21
For indoor use only
Setting : 2 temperature thresholds
Temperature ranges : from –10°C to +40°C
Can be used to initiate 2 scenarios when the
temperature is higher than the high threshold or
lower than the low threshold
Weatherproof radio individual blind
switch
1
0883 27
Controls motors (4 wire) on 230 V
electric blinds for lowering/raising/
stopping the blind
Installed in the loft or in the blind head
rail during modernisation of an existing
blind without damage to the walls
Must be used together with a centralised switch
Cat. No. 0672 64 (p. 5)
Must remain accessible for any programming
necessary
Maximum loads supported in 230 VA : 1 x 500 VA
Indoor temperature sensor
Weatherproof radio transmitter/receiver
multifunction switches - 230 VA
1
1
Switches for controlling 1 or 2 circuits connected
to its terminals according to 3 different operating
modes : time-lag switch, switch, remote control
switch
Its receiver function is used to execute, on its
circuits, on/off commands received from individual
control units, centralised control units, scenario
switches, mobile control units and detectors
Phase/neutral power supply
5738 58
Weatherproof multifunction switch
2 500 W
5738 60
Weatherproof multifunction 2 gang switch
2 x 2 500 W
Technical alarms
NEW
1
Equipped with round cover plates and magnesium
circle for control
To be equipped with 2 module surround plates and
support frames (p. 30-33)
To be installed in lush mounting boxes min. depth
40 mm
0672 33 Actuators 100-240 VA - 10 A
Used to close the valve from where gas/water is
supplied to the installation
Use transformers Cat. Nos. 5740 35 and 5740 85
(see Wiring devices catalogue) and detectors
NEW
1
0675 25 Transceivers
ZigBee ®: Certiied product Manufacturer Speciic Proile
9
ArteorTM Radio/ZigBee®
n Switches and dimmers – maximum loads at 230 V
For values at 110 V, please halve values
Universal
Leading edge
Incandescent
lamp
Halogen lamp
0672 31
300 W
300 W
300 VA
300 VA
5735 44
2 x 300 W
2 x 300 W
2 x 300 VA
2 x 300 VA
0672 33
2 500 W
2 500 W
2 500 VA
2 500 VA
1 250 VA
1 250 VA
1250 VA
0672 34
2 x 1 000 W
2 x 1 000 W
2 x 1 000 VA
2 x 1 000 VA
2 x 500 VA
2 x 500 VA
2 x 500 VA
5735 45
3 x 1 000 W
3 x 1 000 W
3 x 1 000 VA
3 x 1 000 VA
3 x 500 VA
3 x 500 VA
3 x 500 VA
DIMMERS
SWITCHES
Cat.Nos.
ELV halogen with ELV halogen
ferromagnetic
with electronic
transformer
transformer
Fluorescent
tube
LED
Compact
luorescent lamp
Fluorescent
lamps with
0-10 V ballast
Reducer motor
for shutter
0672 63
500 VA
0883 27
500 VA
5738 62
2 500 W
2 500 W
2 500 VA
2 500 VA
1 250 VA
1 250 VA
1 250 VA
5738 58
2 500 W
2 500 W
2 500 VA
2 500 VA
1 250 VA
1 250 VA
1 250 VA
yes
5738 60
2 x 2 500 W
2 x 2 500 W
2 x 2 500 VA
2 x 2 500 VA
2 x 1 250 VA
2 x 1 250 VA
2 x 1 250 VA
yes
0883 05
300 W
300 W
300 VA
300 VA
300 VA
300 VA
300 VA
-
0883 23
1 200 W
1 200 W
1 200 VA
1 200 VA
0672 37
300 W
300 W
300 VA
300 VA
5735 49
2 x 300 W
2 x 300 W
2 x 300 VA
2 x 300 VA
5735 46
600 W
600 W
450 VA
600 VA
5735 47
400 W
400 W
400 VA
400 VA
160 VA
160 VA
5735 48
1 000 VA
5738 66
1 000 VA
5738 64
0883 20/22
600 W
600 W
450 VA
600 VA
60 W/500 W
60 W/500 W
60 VA/500 VA
60 VA/500 VA
ZigBee®: Certiied product - Manufacturer Speciic Proile
10
Trailing edge
ArteorTM BUS/SCS
lighting control and automation control mechanisms
0675 52
5739 04
5739 05
Key covers for
micropush
control
mechanisms
p. 13
Technical characteristics p. 17-18
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
Cat. Nos.
1
0675 52
1
0675 54
White
1
1
Basic control mechanisms
To be installed in flush mounting boxes
Micropush control mechanisms
To be equipped with round or square
key covers in white or black inish with
magnesium buttons (p. 13) and 2 module
surround plates (p. 30-33) or
touch plates (below)
2 module mechanism
Control for the activation of
1 actuator for single or double
loads, or 2 actuators for single
load, or independent double loads for
lighting and shutters
3 module mechanism
Control for the activation of 3
actuators for single or double
loads, or 2 actuators for single
load or independent double loads
Touch plates
Pack
1
1
Cat. Nos.
Multi-functions control mechanisms
Micropush control mechanisms
To be equipped with round or square
key covers in white or black inish with
magnesium buttons (p. 13) and 2 module
surround plates (p. 30-33) or
touch plates (below)
0675 53
2 module mechanism
Control for the activation of
4 scenarios, soft-start and
soft-stop of dimmers, sound
distribution functions and
activation of devices installed on
different BUS branches
Touch plates
Control for the activation of 4 scenarios,
soft-start and soft-stop of dimmers, sound
White
Black
distribution functions
5739 04 5739 05
2 module mechanisms
For use with Cat. No. 0675 53
(above)
Black
5739 08 5739 09
5739 12 5739 13
2 module mechanisms
For use with Cat. No. 0675 52
(above)
3 module mechanisms
For use with Cat. No. 0675 54
(above)
To be used with frame Cat. No.
5760 40 + back box Cat. No. 0800 49 - dry
partition or Cat. No. 0801 49 - concrete
Flush mounting controller with
built-in control
1
0675 56
For controlling two lighting circuits
or a blind motor
Slat orientation control
2 outputs - 2 A
230 V power supply
To be installed in flush mounting boxes
To be equipped with key covers (p. 13),
support frames and surround plates
(p. 30-33)
Scenario controllers with speciic
marking for hotels (see p. 29)
11
ArteorTM BUS/SCS
lighting control and automation control mechanisms (continued)
5739 02
5 737 16
5739 00
Key covers for
micropush
control
mechanisms
p. 13
F401
0882 32
5739 03 (for example
scenario IN / OUT /
DINNER / RELAX)
5739 01
Technical characteristics p. 17-18
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
Cat. Nos.
F401
NEW
1
0675 57
NEW
1
0675 58
Advanced rolling shutter
management devices
Pack
Relay interlocking or pulse based motor
drive. Position status return : closed, open,
intermediate position. Drive following
different orders : up, down, or opening %
2-relay controller for the driving of a
motor
Maximum motor power : 500 W, 230 Vac
Logic relay interlocking
2 DIN modules
Controller with integrated control for the
driving of a motor
To be itted with :
- STOP key cover, Cat. Nos. 5745
45/46/47/48
- rolling shutter key cover Cat. Nos. 5745
15/16 and 5744 92/93 (p. 13)
- Arteor surround plates (p. 30-33)
- back box
Maximum motor power : 500 W, 230 Vac
Logic relay interlocking
Stop, up, down function
Possibility of blade angle adjustment
Recall of a previously saved opening/
closing position
Recording of the opening/closing position
on the control using self-learning procedure
Speciic advanced motor management
control
To be fitted with :
- STOP key cover, Cat. Nos. 5745
45/46/47/48
- rolling shutter key cover Cat. Nos. 5745
15/16 and 5744 92/93 (p. 13)
- Arteor surround plates (p. 30-33)
- back box
Point-point, room, group, and general
control of the motor controlled rolling
shutters, to be used in conjunction with
actuators Cat. Nos. F401 or 0675 57
(above)
Stop, up, down function
Possibility of blade angle adjustment
Recall of a previously saved opening/
closing position
Recording of the opening/closing
position on the control using self-learning
procedure
Cat. Nos.
White
Magnesium
1
5739 02 5739 03
1
5745 03 5745 04
Scenario controllers
For controlling a number of controllers and
managing 4 scenarios
To be used in conjunction with scenario
module Cat.No. F420
Supplied complete with scenario
identiication label
Equipped with round or square version
cover plates
To be equipped with support frames and
surround plates (p. 30-33)
2 module mechanism
NEW
NEW
1
1
8 push button controllers
0675 92
White
Black
3541
3542
For lighting, automation, sound
diffusion and scenario functions
A5 sheets for the customisation of the
symbols of Cat. No. 0675 92
Touch screens
Equipped with white or magnesium
surround, to be equipped with square
surround plates (p. 30-33)
White
1
Magnesium
5737 16 5737 17
1.2" OLED touch screen for
management of max. 4 functions
sound system, temperature
control, 4 scenarios, energy
management 2 module plates
IR receivers
With white or magnesium surround
To be equipped with square surround plates
(p. 30-33)
White
1
Magnesium
5739 00 5739 01
To be associated with remote
control Cat. No. 0882 32 (see
below)
Can receive up to 16 commands
Mobile scenario controller
Advanced IR remote controller
1
Scenario controllers with speciic
marking for hotels (see p. 29)
12
0882 32
5 push buttons to control 5 scenarios
(1 scenario can control several
functions : shutters, lighting...)
To be used in association with
IR receiver Cat. Nos. 5739 00/01
(see above)
ArteorTM BUS/SCS
lighting control and automation key covers
NEW
5745 05
5745 08
5745 38
5745 36
5745 16
5744 86
NEW
NEW
5744 81
5744 80
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
n Selection chart for round or square key covers
Key covers are available in round or square versions, in white or black inish with magnesium buttons
Use in conjunction with surround plates to complete your installation (p. 30-33)
NEW
ROUND VERSION
key cover description
Modules
White
SQUARE VERSION
Magnesium
White
Magnesium
5744 87
5744 86
5744 89
5744 88
ON
F
OF
Regulation symbol left-hand
side mounting
ON
1
5745 05
5745 06
OFF
Regulation symbol right-hand
side mounting
ON
F
ON
OF
ON
1
5745 07
OFF
5745 08
F
OF
ON
Regulation symbol
2
ON
5745 37
5745 38
F
OF
OFF
Up/Down symbol any side mounting
1
5745 15
5745 16
5744 93
5744 92
Up/Down symbol
2
5745 35
5745 36
5744 95
5744 94
GEN marking
2
5745 39
5745 40
5744 73
5744 72
ON/OFF marking
2
5745 33
5745 34
5744 81
5744 80
GEN
GEN
ON
ON
OFF
OFF
Sound source selection
right-hand mounting
1
5745 11
5745 12
5744 91
5744 90
Shutter STOP marking any
side mounting
1
5745 45
5745 46
5745 47
5745 48
Without marking any
side mounting
1
5745 09
5745 10
5744 65
5744 64
Without marking
2
5745 13
5745 14
5744 67
5744 66
GEN
Scenario controllers with speciic
marking for hotels (see p. xx)
13
ArteorTM BUS/SCS
lighting control and automation
F411/2
0026 02
F414
0026 22
Technical characteristics p. 17-18
Support frames and plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
Cat. Nos.
1
F411/1N
1
F411/2
1
F411/4
1
0026 02
DIN rail actuators 100/240 VA - 50/60 Hz
N/O contact
To be associated to loads and control mechanisms
(p. 11-12)
1 output relay for controlling 1 circuit
Maximum load : 16 A resistive load
2 DIN modules 17.5 mm
Replaces Cat. No. 0038 41
2 output relay for controlling 2 circuits
Maximum load per circuit : 6 A resistive load or
incandescent lamps
1 x 500 VA for roller blinds with end stops
2 DIN modules 17.5 mm. Replaces Cat. No. 0038 42
4 output relay for controlling 4 circuits
Maximum load per circuit : 6 A resistive load
2 DIN modules 17.5 mm
Replaces Cat. No. 0038 44
Relay with 4 x 16 A outputs
6 DIN modules 17.5 mm
Pack
Cat. Nos.
1
E46ADCN
1
F414
1
F415
NEW
1
F418
1
F413N
1
0026 11
1
0026 31
1
1
0026 21
0026 22
RJ adaptor
10
14
0488 72 For connecting Cat. Nos. 0026 02/21/22/11 to the BUS
27 V= - 1. 2 A
Input voltage : 230 VA output voltage 27 V=
Maximum consumption : 300 mA
Maximum current supplied : 1.2 A
8 DIN modules 17.5 mm
Replaces Cat. No. 0035 60
Power supplies
1
0634 42
27 V= - 0.6 A
220-240 V – 50/60 Hz
Output 1-2 27 V= 600 mA
2 DIN modules 17.5 mm
Contact interfaces
DIN controllers for dimming
For use in conjunction with loads and control
mechanisms (p. 11-12) for dimming control
For incandescent, halogen and ferromagnetic
loads
Load : 60 – 1 000 W / 230 VA - 50 Hz
4 DIN modules 17.5 mm. Replaces Cat. No. 0036 52
For electronic transformers loads
1 output
Load : 0.25 to 1.7 A / 230 VA - 50 Hz
4 DIN modules 17.5 mm. Replaces Cat. No. 0036 53
For dimmer LEDs, compact luorescent lamps
CFL, energy saving halogen lamps and
electronic transformers
1 output – 300 VA maximum 230 Va.c. – 150 VA
maximum 127 Vd.c.
4 DIN modules 17·5 mm
For 1-10 V ballasts
Load : 500 VA maximum
2 DIN modules 17.5 mm. Replaces Cat. No. 0036 56
1 output – 1000 VA maximum
6 DIN modules 17.5 mm
For DALI protocol
Enables communication between the BUS/SCS
installation and the lighting appliances controlled by
DALI protocol
6 DIN modules 17.5 mm
For incandescent, halogen 230 V, ELV halogen
with electronic or ferromagnatic transformer
6 DIN modules 17.5 mm
Automatic recognition of the load
1 output – 1000 W maximum
2 outputs – 400 W maximum per output
BUS power supplies
1
F428
1
3477
1
F401
Allow the connection between traditional
wiring accessories such as switches, time
delay switches or external sensors and
BUS installation to control 2 actuators for
single function or 1 actuator for double
functions
2 independent contacts
2 DIN modules 17.5 mm
Replaces Cat. No. 0035 53
Basic modularity
To be installed in flush mounting box
Replaces Cat. No. 5739 96
2-relay controller for the driving of a
motor
Maximum motor power : 500 W, 230 Vac
Logic relay interlocking
2 DIN modules
For Plexo3 enclosures
(visit www.legrand.co.uk)
ArteorTM BUS/SCS
accessories for automation
Full technical guide
available to download at
www.legrand.co.uk
F425
F420
F422
3501/AUX
3501/CEN
3501K/1
Technical characteristics p. 17-18
Support frames and plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
1
1
Cat. Nos.
F425
F420
F422
Additional DIN devices
Memory module for actuators
Restores the last state of an actuator in
case of a power failure
2 DIN modules 17.5 mm
Replaces Cat. No. 0035 52
Scenario module
Allows creation of scenarios by linking
different functions
Up to 16 scenarios
2 DIN modules 17.5 mm
Replaces Cat. No. 0035 51
SCS-SCS gateway (extension)
Allows the extension of the installation or
the integration between different functions
Suitable for larger installations
2 DIN modules 17.5 mm
Replaces Cat. No. 0035 62
Pack
1
L4669
1
L4669/500
1
L4669KM1
2 wire cable for BUS system
Conform to IEC 45-5 and IEC 20-20
Length 100 m
Replaces Cat. No. 0492 31
Length 500 m
Replaces Cat. No. 0492 32
Length 1 000 m. Supplied on wooden reels
Replaces Cat. No. 0492 32
Individual plug-in jumpers
5
1
3501K/1
Kit with : AUX, GEN, GR, AMB, ON, OFF,
O/I, PUL, SLA,CEN, ↑↓, ↑↓M (10 pieces of
each figure)
1
3501K
Old Cat. No. 0261 45
Kit with "0 to 9" jumpers (10 pieces of each
figure)
Plier
1
3502
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
1
3504
Virtual coniguration software
Used to configure mechanisms
and controllers in the installation for
applications such as lighting, shutters and
temperature control
Comprising 1 CD with software for PC
Additional devices
1
3559
10
3515
USB cable
Programming cable
BUS spare clamp
Used to connect the various system
components (controls, dimmers, etc) to the
BUS line
5
5
0
1
2
3
4
5
6
7
8
9
GEN
GR
AMB
AUX
ON
OFF
O/I
PUL
SLA
CEN
↑↓
↑↓M
Old Cat. No.
0492 00
0492 01
0492 02
0492 03
0492 04
0492 05
0492 06
0492 07
0492 08
0492 09
0492 10
0492 11
0492 12
0492 13
0492 14
0492 15
0492 16
0492 17
0492 18
0492 19
0492 20
0492 21
3501/0
3501/1
3501/2
3501/3
3501/4
3501/5
3501/6
3501/7
3501/8
3501/9
3501/GEN
3501/GR
3501/AMB
3501/AUX
3501/ON
3501/OFF
3501/O/I
3501/PUL
3501/SLA
3501/CEN
3501/T
3501/TM
10
5
Virtual coniguration software
Plug-in jumpers for all devices
Used to associate an address with the
different system components
10
SCS cables
Cat. Nos.
Plug-in jumper kits
Plier for plug-in in jumpers
For Plexo3 enclosures
(visit www.legrand.co.uk)
15
ArteorTM BUS/SCS
accessories for automation
For more
information
on lighting
management,
see Wiring
devices
catalogue
0488 23
(directional head)
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
1
16
Cat.Nos
180° corner sensors
Supplied with ixing base
Connect to 2 circuit controller Cat.No. 0488 50 (see
Wiring devices catalogue) by cord or RJ 45 cable or
BUS/SCS cable
itted with RJ 45 connector Cat.No. 0488 72 (p. 14)
180° corner sensor – detection ield 45 m² – for
small of f ices
PIR – Maximum range 8 m – IP 42
Optimum distance between 2 sensors : 6 m
Consumption 0·2 W on standby
0488 24 RJ 45 connection
All loads 10 A – 240 V
180° corner sensor – detection ield 90 m² – for
conference rooms and large ofices
Dual-tech – Maximum range 11 m – IP 42
With directional head
Optimum distance between 2 sensors : 10 m
Consumption 0·2 W on standby
0488 23 RJ 45 connection
All loads 10 A – 240 V
Pack
Cat. Nos.
180° switch sensors
1
1
Detection ield 15 m²
Presence sensors
PIR -Maximum range 10 m – IP 41
5740 46
White
5740 96
Magnesium
1
1
Absence sensors
Dual-tech – Maximum range 10 m – IP 41
5740 48
White
5740 98
Magnesium
ArteorTM BUS/SCS
lighting control and automation
n System principle
The lighting control system allows the management of different functions in a simultaneous and integrated way
All the components of the lighting control system are interconnected via an electronic circuit that can be programmed : the BUS
The information is exchanged through the 2 wire BUS cable at low voltage (27 V= )
There are two types of devices in the system :
- the controls units, which are connected only to the BUS cable and
- the actuators, connected both to the BUS cable and to the 230VA power line for managing the connected load
When the lighting control system devices are configured properly, it is possible to manage the load as follows :
- control for a single load
- control for one or more load groups
- simultaneous management of all loads
It is also possible to carry out special functions, which are hard to achieve with conventional electrical systems
These functions are called scenarios
One scenario is a set of simultaneous control of multiple groups of loads, used in order to modify the environment according to the user’s needs
An example of a scenario can be represented by the simultaneous activation of lights, which can be set by the user after getting inside the
building by using one single control device or by using the touch screen menu
n Installation principle
Consumer unit
Control units
Touch screen
Cat. No. 5737 16
or 5737 17
Scenario module
Cat. No. F420
Power supply
Cat. No. E46ADCN
Scenario controller
Cat. No. 5739 02
or 5739 03
Touch control mechanism
Cat. No. 5739 04 or 5739 05
230 VA
2
1
3
2 wire cable for BUS Cat. No. L4669
Din rail
actuator
Cat. No. F411/1N
Din rail
leading/trailing
edge dimmer
Cat. No. 0026 22
Din rail
actuator
Cat. No. F411/2
Actuators
1
2
3
Loads
Scenario controllers
can manage
zone 1, 2 and 3
Lighting
source
Zone 1 :
Kitchen
1
Lighting
source
Zone 2 :
Dining room
2
Roller
blinds,
shutters
3
Zone 3 :
Shutter control
17
ArteorTM BUS/SCS
lighting control and automation (continued)
n Actuators and dimmers max. loads at 230 V
Universal
Leading edge
Incandescent
lamp
Halogen lamp
ELV halogen with
ferromagnetic
transformer
ELV halogen
with electronic
transformer
Fluorescent
tube
Compact
fluorescent
lamp
LED
Fluorescent
lamps with
0-10 V ballast
Reducer
motor for
shutter
F411/1N
3 500 W
3 500 W
1 000 VA
1 000 VA
1 000 VA
1 000 VA
–
–
–
F411/2
2 300 W
2 300 W
500 VA
250 VA
250 VA
250 VA
–
–
500 VA
F411/4
1 400 W
1 400 W
500 VA
70 VA
70 VA
70 VA
–
–
500 VA
0026 01
2 x 3 600 W
2 x 3 600 W
2 x 3 600 VA
2 x 1 000 VA
2 x 1 000 VA
–
–
–
–
0026 02
4 x 1 000 W
4 x 1 000 W
4 x 500 VA
4 x 500 VA
4 x 500 VA
4 x 500 VA
4 x 500 VA
–
4 x 100 VA
F413N
–
–
–
–
–
–
10 x 55 VA
10 x 55 VA
–
0026 11
–
–
–
–
–
–
–
1 000 VA - 50 mA
–
0026 21
1 000 W
1 000 W
500 VA
500 VA
–
–
–
–
–
0026 22
2 x 500 W
2 x 500 W
2 x 250 VA
2 x 500 VA
–
–
–
–
–
F414
1 000 W
1 000 W
1 000 VA
–
–
–
–
–
–
F415
–
–
–
400 VA
–
–
–
–
–
F418
300 W
300 W
–
300 VA
–
300 VA
300 VA
–
–
DIMMERS
ACTUATORS
Cat. Nos.
18
Trailing edge
ArteorTM BUS/SCS
temperature control
Full technical guide
available to download at
www.legrand.co.uk
5739 20
5739 19
5739 23
5739 24
5737 16
Support frames and surround plates selection charts p. 30-31
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
Cat. Nos.
Central units for temperature
control
Equipped with white or magnesium square
version keypad cover plates, to be
equipped with special surround plates
(p. 30-33)
Supplied with support frame, flush mounting
box and 7.2 V battery
White
Magnesium
Cat. No. 0675 18
5739 18 5739 19
Temperature control central unit
Can manage up to 99 zones
Pack
Cat. Nos.
1
F430/2
1
F430/4
Probes
1
To control the room temperature of heating
and cooling system
Equipped with white or magnesium square
version cover plates, to be equipped with
surround plates (p. 30-33)
To be installed in flush mounting boxes
White
Magnesium 2 module mechanisms 22.5 x 45 mm
Temperature setting range :
5739 20 5739 21
from 3 °C to 40 °C
1
5739 22 5739 23
1
5739 24 5739 25
Temperature setting range :
from 3 °C to 40 °C with dial for
adjustment of +/- 3 °C relative to
the set temperature and for the
modality selection
Temperature setting range :
from 3 °C to 40 °C with manual/
automatic speed selection for
fan-coil
1
le
Availabr 2013
be
Septem
1
0674 59
Actuator with 2 independent relays
For single and double loads :
6 A resistive
3 A motorised valves and pumps
2 DIN modules 17.5 mm
Replaces Cat. No. 0035 79
Actuator with 4 independent relays
For single, double or mixed loads :
6 A resistive
3 A motorised valves, pumps and fan-coils
2 DIN modules 17.5 mm
Replaces Cat. No. 0035 80
BUS power supplies
1
E46ADCN
1
E49
27 V= - 1. 2 A
Input voltage : 230 VA output voltage 27 V=
Maximum consumption : 300 mA
Maximum current supplied : 1.2 A
8 DIN modules 17.5 mm
Replaces Cat. No. 0035 60
27 V= - 0.6 A
Input voltage : 230 VA output voltage 27 V=
Maximum current supplied : 0.6 A
2 DIN modules 17.5 mm
Battery for temperature control
central unit
1
3506
7.2 V battery for central unit
Replaces Cat. No. 0675 18
SCS cables
Touch screens
Equipped with white or magnesium
surround, to be equipped with surround
White
Magnesium plates (p. 30-33)
5737 16 5737 17
1.2" OLED touch screen for
management of max. 4 functions
sound system, temperature control,
4 scenarios, energy management
2 module plates
DIN rail actuators 100/240 VA
50/60 Hz
1
L4669
1
L4669/500
1
L4669KM1
1
3456
2 wire cable for BUS system
Conform to IEC 45-5 and IEC 20-20
Length 100 m. Supplied on wooden reels
Replaces Cat. No. 0492 31
Length 500 m. Supplied on wooden reels
Replaces Cat. No. 0492 32
Length 1 000 m. Supplied on wooden reels
Replaces Cat. No. 0492 32
IR transmitter for splitter
Display thermostat
Flush mounted thermostat with
backlit display. Can be used
to control the temperature of
an individual zone, both if a
temperature central unit is and is not
present. Features a temperature probe and
an input for the connection of a contact line
(e.g. window contact). Can be used for the
management of different types of systems,
and the adjustment of the fan speed when
fan coils are used. Possibility of automatic
operation (summer/winter), with compatible
systems. Connection to SCS BUS
– 2 modules.
For controlling splitters in different modes
(auto-hot- cold)
Management of On/Off speeds
(auto-low-medium or high)
Temperature range between 16-30 °C
Air conditioning remote control can “learn”
the IR signal
Can be installed behind the air
conditioning unit
Supplied complete with 2 m cable
Replaces Cat. No. 0883 01
Plug-in jumpers (p. 15)
19
ArteorTM BUS/SCS
energy management
3522
F520
3508BUS
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
Cat.Nos
3522
Consumption indicators
Pulse counter interface
Used to store data from a pulse counter :
water, colorimetry, heat or gas
In countries where there is ATEX Directive
it is mandatory to use a zener barrier/galvanic
insulation barrier between the pulse counter interface
and the gas meter
The barrier must answer to the ATEX directive and
must be installed outside ATEX area
Install one pulse counter interface per meter to
measure the consumption individually
Consumption data stored hour by hour, and kept for
several years (12 years)
Display can be in the form of histograms or
statistical data
Use a touch screen Cat. Nos. 5739 58 and 0672
67/68 (p. 25) to display the consumption of the
various meters
Replaces Cat. No. 0035 54
Pack
Cat.Nos
1
F524
20
1
F520
1
3523
Additional toroid
Operates with consumption indicator
Cat. No. F520 (see above)
Cable cross section 25 mm2 max.
Replaces Cat. No. 0035 56
Used to display the data measured by the
system via several web pages
Can handle different billing rates
Integrated memory for up to 10 pulse
counter circuits
Centralises the data from circuits/pulse counter
Automatic backup onto SD card
Replaces Cat. No. 0035 66
Connectors
Spare parts for consumption indicator
Cat. No. F520 (see opposite)
10
10
10
Consumption indicator for 3 circuits
For single phase installations
Supplied with a toroid and its link
Each toroid can monitor one circuit
The consumption indicator can take up to 3
toroids, for monitoring 3 separate circuits
Several consumption indicators can be installed to
monitor more than 3 circuits on the installation
Instantaneous and cumulative display of the
consumption for each circuit and display of
consumption on touch screens Cat. Nos. 5739 58 and
0672 67/68 (p. 25)
Display can be in the form of histograms or
statistical data
Consumption data can be stored for 1 year, hour by
hour, 2 years day by day or 12 years month by month
Replaces Cat. No. 0035 55
IP data concentrator
3508BUS BUS connector, depth 3.81 mm
Replaces Cat. No. 0492 44
3508U2 2-pole connector
Replaces Cat. No. 0492 45
3508U3 3-pole connector
Replaces Cat. No. 0492 46
ArteorTM BUS/SCS
temperature control
n Installation principle
Consumer unit
Control units
Central unit
Cat. No. 5739 18
or 5739 19
can manage
up to 99 zones
Power supply
Cat. No. E46ADCN
Probe Zone 2
Cat. No. 5739 22
or 5739 23
Probe Zone 1
Cat. No. 5739 22
or 5739 23
230 VA
2
1
Probe Zone 99
Cat. No. 5739 22
or 5739 23
99
2 wire cable for BUS Cat. No. L4669
Actuator with 2
independent relays
Cat. No. F430/2
Actuator with 4
independent relays
Cat. No. F430/4
Actuators
1
2
Loads
Heating
Heating
1
2
Zone 1
Zone 2
21
ArteorTM BUS/SCS
sound distribution
0675 55
5745 12
5739 26
5739 29
5737 16
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
Cat. Nos.
Ampliiers
Pack
Flush mounting ampliier
1
0675 55
1
F502
1
F503
5
5745 11 5745 12
5
5745 05 5745 06
White
2 x 1 Wrms - 2 modules
To be equipped with round version
key covers (below) and surround
plates (p. 30-33)
Replaces Cat. No. 5739 76
DIN rail ampliiers
2 Wrms (1 Wrms + 1 Wrms)
- 100/240 VA, 4 DIN modules
Replaces Cat. No. 0035 85
60 Wrms (30 Wrms + 30 Wrms)
- 100/240 VA, 10 DIN modules
Replaces Cat. No. 0035 83
1 module key covers
For flush mounting amplifier Cat. No. 5739 76
1
Cat. Nos.
Audio/video signal distribution devices
1
F441M
1
F441
Magnesium
Right-hand side mounting with marking
ON
Left-hand side mounting with marking
OFF
5
5744 91 5744 90
5
5744 87 5744 86
Right-hand side mounting
Left-hand side mounting
F
OF
1
F500N
1
L4561N
RCA inputs
Equipped with white or magnesium square
version cover plate, to be equipped with
White
Magnesium surround plates (p. 30-33)
5739 26 5739 27
For connecting a stereo source
to the system
2 module mechanism
22
White
Magnesium Flush mounting
5739 28 5739 29 8 ohms – 100 W
To be installed in flush mounting
box min. depth 80 mm
1
5739 77
1
L4566
16 ohms – 12 W
To be installed in flush mounting
box Cat. Nos. 0893 79 or 0892 79
(opposite)
False ceiling mounting
8 ohms – 100 W. Ø 240 mm
Replaces Cat. No. 5739 81
RDS stereo radio tuner with
coaxial connector for external
aerial antenna
Supplied with depth compensator
for DIN rail. 4 DIN modules
Replaces Cat. No. 0035 82
DIN stereo control sources
Loudspeakers
1
Multi-channel matrix with
cross-connection, mixing
switch functions for distribution
of the stereo sound source
signal and audio/video signals
8 inputs (first 4 for the 2 wire audio/video
system and others for stereo sound source)
8 outputs. 10 DIN modules
Replaces Cat. No. 0035 84
Audio/video node for mixing
audio/video sources (max. 4
sources)
6 DIN modules
Replaces Cat. No. 5739 98
DIN RDS radio sources
ON
1
Touch screens
Equipped with white or magnesium
surround, to be equipped with surround
White
Magnesium plates (p. 30-33)
5737 16 5737 17
1.2" OLED touch screen for
management of max. 4 functions
sound system, temperature control,
4 scenarios, energy management
2 module plates
For stereo sources
IR remote control possible
RCA/RCA and jack cables to
connect to IR transmitters
4 DIN modules
Replaces Cat. No. 0035 86
Flush mounting boxes
2
2
0893 79
0892 79
For loudspeaker Cat. No. 5739 77
For dry partitions - 2 x 3 modules
For concrete walls - 2 x 3 modules
ArteorTM BUS/SCS
sound distribution (continued)
5739 32
3495
Full technical guide
available to download at
www.legrand.co.uk
3460 00
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
Cat. Nos.
Connectors
Equipped with white or magnesium square
version cover plates, to be equipped with
surround plates (p. 30-33)
White
Magnesium 1 module mechanism
8 contact connector to link
5739 32 5739 33
interface Cat. No. 0035 86
to the BUS
Pack
1
1
Attenuator
1
3499
To be connected at the end of the line of
the outputs of audio/video node and
multi-channel matrix
Replaces Cat. No. 0035 89
Insulator
1
3495
Adapts the signal coming from
external sound sources to the
sound distribution system
Replaces Cat. No. 5739 88
1
3496
Sound output for touch screen 3·5" (p. 19)
Works as a source for sound diffusion
system
Replaces Cat. No. 5740 44
Cat. Nos.
BUS power supplies
Power supply unit for sound system
3460 00 Input voltage : 230 VA
Output voltage : 27 V=
Maximum consumption 1 A
8 DIN modules
Replaces Cat. No. 0634 35
27 V= - 0.6 A
E49
Input voltage : 230 VA
Output voltage : 27 V=
Maximum current supplied 0.6 A
2 DIN modules
BUS cable
1
For sound distribution and video door entry system
3369 04 200 m
Replaces Cat. No. 5739 99
Sound output
23
ArteorTM BUS/SCS
sound distribution
n Installation principle
Consumer unit
Control units
Loudspeaker
Cat. No. 5739 28
or 5739 29
Power supply
Cat. No. 3460 00
Amplifier
Cat. No. 0675 55
+ key cover
Cat. No. 5745 11
+ 5745 05
Attenuator
Cat. No. 3499
230 VA
DIN rail amplifier
Cat. No. F502
Attenuator
Cat. No. 3499
Audio/Video node
Cat. No. F441
Loudspeaker
Cat. No. 5739 28
or 5739 29
RCA input
Cat. No. 5739 26
or 5739 27
DIN RDS
radio source
Cat. No. F500N
24
Portable
MP3 Player
(Not included)
Loudspeaker
Cat. No. 5739 28
or 5739 29
ArteorTM BUS/SCS
home management system
NEW
Full technical guide
available to download at
www.legrand.co.uk
5737 16
5739 58
0672 67
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
1
1
Cat. Nos.
Local management
1.2" touch screens
Equipped with white or magnesium
surround, to be equipped with surround
White
Magnesium plates (p. 30-33)
5737 16 5737 17
1.2" OLED touch screen for
management of max. 4 functions
sound system, temperature control,
4 scenarios, energy management
2 module plates
3.5" touch screen
Supplied with support frame and with white
and magnesium cover plate, to be equipped
with special plates (p. 30-33)
5739 58
3.5" touch screen to
control BUS functions,
lighting, temperature control,
sound system, scenarios,
energy management,
intruder alarm
Equipped with front panel
USB connector ready for
open webnet programming
language
To be installed in flush mounting box
Cat. Nos. 0892 79 or 0893 79, opposite
New generation 10” multimedia video
W
E
N
touch screen
10” touch screen performing the functions
of an internal unit and a touch screen
White
Black
The new graphic interface
enables different kinds of
customisations
0672 68 0672 67
Integrated web navigator
It gives the possibility of
controlling all functions from
one single point of the home :
- performing of scenarios
- switching on/off, and dimming of lights
- shutter control
- temperature display and management
- energy management – consumption
display
- sound system management : selection of
music sources, volume adjustment...
- video door entry system call management
- management of multimedia content (photo
frame, audio player, MP3...)
Wall mounted installation (support
supplied)
Requires power supply Cat. No. 3 460 20,
opposite
Pack
Cat. Nos
1
F454
Remote management
Web server gateway TCP-IP
Allows the communication
between a BUS/SCS
installation and a TCP/IP
network
6 DIN modules 17.5 mm
Other devices
1
0492 49
1
MH200N
1
3460 20
1
F450
Supervision software
Can be used in order to tune up the
system's functions through a computer, and
to follow them on real time basis
Scenario scheduler
Allows setting up of up to 300
scenarios with pre-set conditions
(time and logical type)
6 DIN modules 17.5 mm
Replaces Cat. No. 0035 65
Scenario scheduler power supply
Provides power for Web server and
scenario scheduler Cat. No. 0035 65
2 DIN modules 17.5 mm
Replaces Cat. No. 0634 42
Open/Bacnet gateway
Interface for the remote control
of Bacnet devices,Fancoil units,
AC units, underloor heating and
touch screens
Flush mounting boxes
2
2
0893 79
0892 79
For 3.5" touch screen Cat. No. 5739 58
For dry partitions - 2 x 3 modules
For concrete walls - 2 x 3 modules
25
ArteorTM BUS/SCS
door entry system
5739 52
3491 40
5739 50
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
1
Cat. Nos.
Video internal display units
Hands free internal unit
2.5” LCD colour display
Possible integration in BUS system
Equipped with White or Magnesium cover plates, to
be equipped with special plates (p. 30-33)
To be installed in lush mounting box Cat. Nos. 0893 79
or 0892 79
5739 50
White
5739 51
Magnesium
Audio internal display units
1
1
Equipped with:
- microphone
- loudspeaker
- 2 hang-up push buttons
- 1 door release push button
- 2 auxiliary push buttons for other functions
Volume adjustment for communication and call tone,
and with bell cut-off indicator
Allows intercom between several rooms
Supplied complete with special lush mounting box,
cover plate and plate
5740 111
White
5743 112
Magnesium
Pack
Cat. Nos.
Optional cameras
1
5739 86
For outdoor use
2 wire colour camera
1
1
For lush mounting
2 wire colour camera with swivelling lens
Automatic adjustment of focus and brightness
Built-in microphone
Equipped with cover plates, to be equipped with
support frames and surround plates (p. 30-33)
To be installed in lush mounting box
2 modules
5739 52
White
5739 53
Magnesium
1
3460 00
BUS power supply
Flush mounting boxes
2
2
Video/audio entrance panels
1
1
1
Entrance panel
Electronic module including: speaker phone
module, motorised camera and colour display
Possible access via integrated proximity card
reader
Supplied with programming and coniguration
software
Surround plate
3392 13
Vandalproof steel inish cover plate and
support frame
With key for assembly
3491 40
3393 13
Flush mounting box
Vandalproof lush mounting box
1 : Supplied with White plate
2 : Supplied with Mirror Black plate
26
Power supply unit for sound system
Input voltage : 230 VA output voltage
27 V=
Maximum consumption 1 A
8 DIN modules 17.5 mm
Replaces Cat. No. 0634 35
For video display unit Cat. Nos. 5739 50/51
0893 79 For dry partitions - 2 x 3 modules
0892 79 For concrete walls - 2 x 3 modules
ArteorTM BUS/SCS
accessories for video door entry system
3460 20
0408 98
3462 00
3468 30
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
1
1
1
1
1
1
1
1
1
Cat. Nos.
Accessories for video door entry systems
Additional power supply
3460 20 220-240 V - 50/60 Hz
Output 1-2 27 V= 600 mA
2 DIN modules 17.5 mm
Replaces Cat. No. 0634 42
Electric door release with latch
0408 98 For left or right opening. 12 VA or =
6 W - 158 x 26 x 32 mm
Door release
3749 00 Door release - 12 VA/880 mA
Relay for door release
3462 30 Relay for 12 V= release (powered by BUS) for gate
or electromagnetic lock electronic control boxes
An exit push button can be connected
Used to increase the time delay up to 10 minutes
(set by a coniguration jumper)
Permissible output current : 4 A
Stabilised current : 250 mA at 30 ohms
4 x 17.5 mm DIN modules
Replaces Cat. No. 0634 41
Interface for auxiliary control
3462 00 Relay for auxiliary commands
Allows the connection of auxiliary functions such as
lighting, automatic door opening...
4 DIN modules 17.5 mm
To be equipped with coniguration jumpers, to be
ordered separately
Replaces Cat. No. 0634 31
Coniguration jumpers
3501K Composed of 13 jumpers no. 1, 3 jumpers no. 2,
2 jumpers no. 3, 2 jumpers no. 4, 2 jumpers no. 5,
2 jumpers no. 6, 2 jumpers no. 7, 2 jumpers no. 8,
2 jumpers no. 9, 2 jumpers no. 0
Replaces Cat. No. 0261 45
Door release relay
3462 50 Door release relay NC/NO volt-free contact :
max. 24 V= - 8 A resistive, 4 A inductive
2 DIN modules 17.5 mm
Replaces Cat. No. 0634 33
Intercommunication module for up to 5 units
3468 50 For communication between the various internal
units/handsets in the house
Max. capacity : 5 units
4 DIN modules 17.5 mm
Replaces Cat. No. 0634 38
Extension interface
3468 51 Increases the operational performance of the system
(e.g. distance between the entrance panel and the
internal units/handsets)
Replaces Cat. No. 0634 39
Pack
Cat. Nos.
1
3468 30
1
3468 41
1
3474 00
1
5740 39
1
5740 43
1
F441
1
3369 04
Accessories for video door entry systems
(continued)
2 wire video adaptor
Use one adaptor per power supply
2 DIN modules 17.5 mm
Replaces Cat. No. 0634 34
Video signal distributor
With 4 outputs for intercom module for up to 5 units
Replaces Cat. No. 0634 32
Video signal converter
From coaxial to 2 wire bus for 12 V= CCTV cameras :
the CCTV camera is directly supplied via a terminal
Replaces Cat. No. 5740 38
2 wire/IP interface
For extended systems with IP backbone and 2 wire
support
Virtual switchboard software
For managing entryphone and video
entryphone calls
The software (for Windows operating systems) can
be installed on any ixed or mobile PC and is used
to receive, manage and transfer calls from inside
and outside
Offers home video control with cyclical CCTV vision,
day and night functions and the ability to display the
alarms present in the various apartments
- Operating systems supported : Microsoft Windows
XP Service Pack 2 and Windows Vista
- Software required : NET Framework 2.0 or later
Audio/video signal distribution devices
Audio/video node for mixing audio/video sources
(max. 4 sources)
6 DIN modules 17.5 mm
Replaces Cat. No. 5739 98
BUS cable
For sound diffusion and video door entry system
200 m
Replaces Cat. No. 5739 99
27
ArteorTM BUS/SCS
ArteorTM BUS/SCS
video door entry system kits
video and audio door entry systems
Dimensions of video internal display units Cat. Nos. 5739 50/51
33.2
151.5
151.5
+
Installation distances for video door entry systems
Video internal
unit
5740 32 (see composition below)
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-buildingautomation and follow the link to ‘Arteor project and technical guide’
Pack
1
1
Cat.Nos
Video door entry system kits
For 1 apartment
5740 32 Comprising :
- 1 entrance panel supplied complete with special
lush mounting box
- 1 hands free video internal unit equipped
with colour display and supplied with
special lush mounting box, support frame and
Mirror white surround plate
- 1 power supply
- 1 video adaptor
Possibility to install up to 4 internal video or audio
units
For 2 apartments
5740 33 Comprising :
- 1 entrance panel supplied complete with special
lush mounting box
- 2 hands free video internal units equipped with
colour display and supplied with special lush
mounting box, support frame and Mirror white
surround plate
- 1 power supply
- 1 video adaptor
Possibility to install up to 2 internal video or audio
units
Power supply
Entrance panel
> 0.2 mm2
50 m
50 m
50 m (total max. distance)
PT278 (28 mm2)
90 m
115 m
150 m (total max. distance)
SYT 6/10-SYT 5/10
(0.5 mm2)
60 m
80 m
140 m (total max. distance)
SYT 9/10-SYT 8/10
(1 mm2)
200 m
200 m
200 m (total max. distance)
230V
Dimensions of audio internal units Cat. Nos. 5740 11 and 5743 11
40.2
113
45
Installation distances for audio door entry systems
Audio internal
unit
0.28 mm2
Power supply
140 m
Entrance panel
200 m
30 m
290 m
50 m
580 m
100 m
340 m
0.50 mm2
1 mm2
28
210 m
500 m
420 m
1000 m
Door release
ArteorTM BUS/SCS
hotel equipment
0675 90
0675 92
5745 91
Support frames and surround plates selection charts p. 30-33
Technical information : www.legrand.co.uk/arteor-building-automation and follow the link to ‘Arteor project and technical guide’
Pack
Cat.Nos
Control indicators for room management
Pack
Cat.Nos
BUS/SCS keycard switches
1
0675 90
DO NOT DISTURB – MAKE UP THE ROOM
external indicator and bell push button
1
0675 91
DO NOT DISTURB – MAKE UP THE ROOM
external + indicator and bell push button +
badge reader
1
1
Equipped with rocker plates, to be equipped with
support frames and surround plates (p. 30-33)
For energizing a circuit by inserting a key fob
Time delay of approx. 30 sec. after card removal
Lighting of the slot by LED
2 modules
RFID keycard switch
5722 36
White
5727 36
Magnesium
DO NOT DISTURB – MAKE UP THE ROOM
command to be completed with key covers
1
0767 11
le
Availabr 2013
be
Septem
1
1
0675 93
0675 92
1
3541
1
3542
le
Availabr 2013
be
Septem
8 push buttons control for lighting,
automation, sound diffusion and scenario
functions
A5 sheets for the customisation of the symbols of
Cat. No. 0675 92
White
Scenario controllers BUS/SCS
1
1
Touch control plates, supplied complete, to be
installed in lush mounting boxes
4-scene touch control - 4 scenarios
"wake up / sleep / TV / relax" scenarios - 2 modules
For BS lush mounting boxes
5740 89
White
5745 89
Black
1
1
6-scene touch control - 6 scenarios
"wake up / sleep / TV / relax / open curtains / close
curtains" scenarios - 3 modules
For British, Italian and American lush mounting boxes
5740 91
White
5745 91
Black
Magnesium
Key-cover with symbols for control
mechanism BUS/SCS
1
1
Key-cover with symbol DO NOT DISTURB - 2
modules
5743 46
White
5743 47
Magnesium
1
1
5743 48
5743 49
1
1
Couple of key cover with symbol DO NOT DISTURB
and symbol PLEASE CLEAN THE ROOM
5743 94
White
5743 95
Magnesium
1
1
5743 96
5 743 97
1
0674 59
White
Magnesium
White
Magnesium
For RFID keycard switches
MIFARE contactless badge card ISO format
(50 x 80 mm)
Chip : 13.56 MHz
Standard 1 KB memory
le
Availabr 2013
be
Septem
1
MH201
IP Scenario module
Manages scenarios related to hotel rooms
(with basic time and logic conditions)
Works as a gateway for the Coniguration
software
Display thermostat
le
Availabr 2013
be
m
te
p
e
S
Flush mounted thermostat with backlit
display.It can be used to control the
temperature of an individual zone, both
if a temperature central unit is and is not
present. It features a temperature probe
and an input for the connection of a contact line (e.g.
window contact). It can be used for the management
of different types of systems, and the adjustment of
the fan speed when fan coils are used. Possibility
of automatic operation (summer/winter), with
compatible systems. Connection to SCS BUS
– 2 modules
Monitoring software
Software for the monitoring of the status of the room,
for the corresponding basic management and the
programming of badges
1
1
3544SW For hotels with up to 20 rooms
3546SW As above – for hotels over 20 rooms
ZigBee ®: Certiied product Manufacturer Speciic Proile
29
ArteorTM back boxes, support frames and surround plates
square version
SURROUND platES
Neutral
Number of
modules per
mechanism
Back
boxes
Support
frames
1 module
1 gang1
2 modules and
1.2" touch screen
Surround
plates
tattoo
Graphic
White
pearl alu
Graphite
Edition 1
Casual
Formal
5760 03
5752 00
5752 01
5752 02
5761 08
5761 01
5761 02
1 gang1
5760 03
5760 013
5752 10
5752 11
5752 12
5761 28
5761 21
5761 22
3 modules - 1 gang
1 gang1
5760 01
5751 60
5751 61
5751 62
5761 88
5761 81
5761 82
3 modules and
shaver sockets
2 gang2
5760 02
5750 70
5750 71
5750 72
5761 68
5761 61
5761 62
4 modules
2 gang2
5760 00
5750 80
5750 81
5750 82
5761 48
5761 41
5761 42
6 modules
(surface mounting)
Supplied
with plate
5753 70
5753 71
5753 72
5763 78
5763 71
5763 72
Supplied
with plate
5753 90
5753 91
5753 92
–
–
–
Supplied
with plate
5754 00
5754 01
5754 02
–
–
–
SQUaRE VERSION
5723 93
6890 27
(flush mounting)
5723 96
2 x 6 modules
(surface mounting)
6890 28
(flush mounting)
0818 56
3 x 6 modules
(flush mounting)
8 modules
(flush mounting)
Supplied
with plate
5767 00
5767 01
5767 02
5767 18
5767 11
5767 12
For 5 a/13 a switched
socket outlet 1 gang
1 gang1
Not required
5750 90
5750 91
5750 92
5762 18
5762 11
5762 12
For 13 a twin
switched socket
outlet - 2 gang
2 gang2
Not required
5751 00
5751 01
5751 02
5762 08
5762 01
5762 02
For 13 a fused
connection unit switched
1 gang1
Not required
5751 20
5751 21
5751 22
5761 98
5761 91
5761 92
For cooker unit
Cat. No. 5720 88
2 gang2
Not required
5751 50
–
–
–
–
–
Blanking cover plate
British standard
1 gang1
5760 03
or
5760 01
5751 30
5751 31
5751 32
–
–
–
Blanking cover plate
British standard
2 gang2
5760 02
5751 40
5751 41
5751 42
–
–
–
8218 59
British standard 60.3 mm ixing centres
1 : Suitable for use with 1 gang back boxes. For Legrand options, see wiring devices catalogue
2 : Suitable for use with 2 gang back boxes. For Legrand options, see wiring devices catalogue
30
SURROUND platES
Mirror
Brushed metal
Wood
leather
Signature
Mirror
white
Mirror
black
Mirror
red
Mirror
taupe
Stainless
steel
Gold
brass
Wenge
style
light
oak
Club
Galuchat
Woven
metal
5752 04
5752 03
5761 06
5761 05
5752 06
5761 00
5752 05
5761 09
5761 03
5761 04
5761 07
5752 14
5752 13
5761 26
5761 25
5752 16
5761 20
5752 15
5761 29
5761 23
5761 24
5761 27
5751 64
5751 63
5761 86
5761 85
5751 66
5761 80
5751 65
5761 89
5761 83
5761 84
5761 87
5750 74
5750 73
5761 66
5761 65
5750 76
5761 60
5750 75
5761 69
5761 63
5761 64
5761 67
5750 84
5750 83
5761 46
5761 45
5750 86
5761 40
5750 85
5761 49
5761 43
5761 44
5761 47
5753 74
5753 73
5763 76
5763 75
5753 76
5763 70
5753 75
5763 79
5763 73
5763 74
5763 77
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5767 04
5767 03
5767 16
5767 15
5767 06
5767 10
5767 05
5767 19
5767 13
5767 14
5767 17
5750 94
5750 93
5762 16
5762 15
5750 96
5762 10
5750 95
5762 19
5762 13
5762 14
5762 17
5751 04
5751 03
5762 06
5762 05
5751 06
5762 00
5751 05
5762 09
5762 03
5762 04
5762 07
5751 24
5751 23
5761 96
5761 95
5751 26
5761 90
5751 25
5761 99
5761 93
5761 94
5761 97
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
31
ArteorTM back boxes, support frames and surround plates
round version
SURROUND platES
Neutral
Number of
modules per
mechanism
Back
boxes
Support
frames
2 modules
1 gang1
3 modules
Surround
plates
tattoo
Graphic
White
pearl alu
Graphite
Edition 1
Casual
Formal
5760 03
5756 10
5756 11
5756 12
5761 18
5761 11
5761 12
2 gang2
5760 02
5755 40
5755 41
5755 42
5761 58
5761 51
5761 52
3 modules - 1 gang
1 gang1
5760 01
5755 60
5755 61
5755 62
5761 78
5761 71
5761 72
4 modules
2 gang2
5760 00
5755 50
5755 51
5755 52
5761 38
5761 31
5761 32
6 modules
6890 27
(flush mounting)
Supplied
with plate
5767 40
5767 41
5767 42
5767 58
5767 51
5767 52
2 x 6 modules
(flush mounting)
Supplied
with plate
5756 90
5756 91
5756 92
–
–
–
8 modules
(flush mounting)
Supplied
with plate
5766 80
5766 81
5766 82
5766 98
5766 91
5766 92
ROUND VERSION
6890 28
8218 59
British standard 60.3 mm ixing centres
1 : Suitable for use with 1 gang back boxes. For Legrand options, see wiring devices catalogue
2 : Suitable for use with 2 gang back boxes. For Legrand options, see wiring devices catalogue
ArteorTM back boxes and surround plates
special items
SURROUND platES
Mechanisms
Video internal display unit
2·5" BUS alarm module
3·5" touch screen
Central unit for temperature control
32
Flush
mounting
boxes
for dry
partitions
Neutral
Surround
plates
tattoo
Graphic
White
pearl alu
Graphite
Edition 1
Casual
Formal
–
–
–
–
–
–
–
–
–
–
–
–
0893 79
(concrete walls)
0892 79
(dry partition walls)
Supplied
with box
SURROUND platES
Mirror
Brushed metal
Wood
leather
Signature
Mirror
white
Mirror
black
Mirror
red
Mirror
taupe
Stainless
steel
Gold
brass
Wenge
style
light
oak
Club
Galuchat
Woven
metal
5756 14
5756 13
5761 16
5761 15
5756 16
5761 10
5756 15
5761 19
5761 13
5761 14
5761 17
5755 44
5755 43
5761 56
5761 55
5755 46
5761 50
5755 45
5761 59
5761 53
5761 54
5761 57
5755 64
5755 63
5761 76
5761 75
5755 66
5761 70
5755 65
5761 79
5761 73
5761 74
5761 77
5755 54
5755 53
5761 36
5761 35
5755 56
5761 30
5755 55
5761 39
5761 33
5761 34
5761 37
5767 44
5767 43
5767 56
5767 55
5767 46
5767 50
5767 45
5767 59
5767 53
5767 54
5767 57
–
–
–
–
–
–
–
–
–
–
–
5766 84
5766 83
5766 96
5766 95
5766 86
5766 90
5766 85
5766 99
5766 93
5766 94
5766 97
SURROUND platES
Mirror
Brushed metal
Wood
leather
Signature
Mirror
white
Mirror
black
Mirror
red
Mirror
taupe
Stainless
steel
Gold
brass
Wenge
style
light
oak
Club
Galuchat
Woven
metal
5764 84
5764 83
–
–
5764 86
5764 80
–
–
–
–
5764 87
5765 24
5765 23
–
–
5765 26
5765 20
–
–
–
–
5765 37
33
Obsolete items cross-reference tables
34
Wiring devices catalogue
page reference
Wiring devices
catalogue addendum
page reference
Scenario module
55
15
F425
Memory module
55
15
003553
F428
DIN contacts interface
54
14
003554
3522
Pulses counter interface
59
20
003555
F520
Bus meter with memory 3-inputs for toroids - 1 DIN
59
20
003556
3523
Additional toroid
59
20
003560
E46ADCN
Power supply 230 V
54
14
003562
F422
SCS-SCS gateway
55
15
003565
MH200N
Scenario programmer
64
25
003567
E49
Mini power supply
54
19/23
003582
F500N
Radio Tuner
61
22
003583
F503
DIN power amplifier
61
22
003584
F441M
Multichannel matrix
61
22
003585
F502
DIN amplifier
61
22
003586
L4561N
Stereo control
61
22
003589
3499
Line terminator
62
23
003652
F414
DIN dimmer 1000 W
54
14
003653
F415
DIN dimmer 400 VA
54
14
003656
F413N
Ballast DIN dimmer 1-10 V
54
14
003841
F411/1N
1 relay DIN actuator 16 A
54
14
003842
F411/2
2 realys DIN actuator 10 A
54
14
003844
F411/4
4 relays DIN actuator 6 A
54
14
026145
3501K
Configurators kit 0-9
55
15
049200
3501/0
“Configurators “”0””
55
15
049201
3501/1
“Configurators “”1””
55
15
049202
3501/2
“Configurators “”2””
55
15
049203
3501/3
“Configurators “”3””
55
15
049204
3501/4
“Configurators “”4””
55
15
049205
3501/5
“Configurators “”5””
55
15
049206
3501/6
“Configurators “”6””
55
15
049207
3501/7
“Configurators “”7””
55
15
049208
3501/8
“Configurators “”8””
55
15
049209
3501/9
“Configurators “”9””
55
15
049210
3501/GEN
“Configurators “”GEN””
55
15
049211
3501/GR
“Configurators “”GR””
55
15
049212
3501/AMB
“Configurators “”AMB””
55
15
049213
3501/AUX
“Configurators “”AUX””
55
15
049214
3501/ON
“Configurators “”ON””
55
15
049215
3501/OFF
“Configurators “”OFF””
55
15
049216
3501/OI
“Configurators “”O/I””
55
15
049217
3501/PUL
“Configurators “”PUL””
55
15
049218
3501/SLA
“Configurators “”SLA””
55
15
049219
3501/CEN
“Configurators “”CEN””
55
15
049220
3501/T
“Configurators “”T””
55
15
049221
3501/TM
“Configurators “”TM””
55
15
049222
3515
SCS clamp
55
15
049231
L4669
SCS cable
55
1
049232
L4669/500
SCS-cable
55
1
049234
3559
USB programming cable
55
15
049237
3501K/1
Special configurators kit
55
15
049244
3508BUS
Removable bus clamp width 3,81
59
20
049245
3508U2
Removable clamp 2 poles
59
20
049246
3508U3
Removable clamp 3 poles
59
20
067516
3507/6
6 V battery
-
19
067518
3506
7.2 V battery
58
19
573812
067231
Switch without neutral 300 W
44
4
573813
067231
Switch without neutral 300 W
44
4
573814
573544
Switch without neutral 2 x 300 W
44
4
573815
573544
Switch without neutral 2 x 300W
44
4
573816
067237
Leading/trailing dimmer 300 W
44
5
573817
067237
Leading/trailing dimmer 300 W
44
5
573818
573549
Leading/trailing dimmer 2 x 300 W
44
4
573820
573546
Leading/trailing dimmer 600 W
44
4
Old
Cat. Nos.
New
Cat. Nos.
003551
F420
003552
Product descriptions
Obsolete items cross-reference tables
Wiring devices catalogue
page reference
Wiring devices
catalogue addendum
page reference
Leading/trailing dimmer 600 W
44
4
067233
Switch with neutral 2500 W
44
4
573823
067233
Switch with neutral 2500 W
44
4
573824
067234
Switch with neutral 2 x 1000 W
44
4
573825
067234
Switch with neutral 2 x 1000 W
44
4
573826
573545
Switch with neutral 3 x 1000 W
44
4
573827
573545
Switch with neutral 3 x 1000W
44
4
573828
573547
Universal dimmer 300 W
44
4
573829
573547
Universal dimmer 300 W
44
4
573832
573548
Dimmer 0-10 V
44
4
573833
573548
Dimmer 0-10 V
44
4
573834
067235
Switch control 1 G
45
5
573835
067235
Switch control 1 G
45
5
573836
067236
Switch control 2 G
45
5
573837
067236
Switch control 2 G
45
5
573838
067239
Dimmer control
45
5
573839
067239
Dimmer control
45
5
573840
067263
Shutter actuator
44
4
573841
067263
Shutter actuator
44
4
573842
067264
shutter control
45
5
573843
067264
shutter control
45
5
573846
573550
20 A switch
48
8
573847
573550
20 A switch
48
8
573848
067240
4 scenarios control
45
5
573849
067240
4 scenarios control
45
5
573856
067250
Gateway SCS/ZigBee
48
8
573857
067250
Gateway SCS/ZigBee
48
8
573872
067233
Switch with neutral 2500W
47
4
573873
067233
Switch with neutral 2500W
47
4
573874
067525
Transceiver for technical alarms
47
9
573875
067525
Transceiver for technical alarms
47
9
573961
067556
Flush mounted actuator and free control
52
11
573964
574505
KEY COVER REGULATION 1 MODULE - WHITE
53
13, 22
573965
574506
KEY COVER REGULATION 1 MODULE - MAGN
53
13, 22
573966
574511
KEY COVER SOUND DIFFUSION 1 MODULE - WHITE
61
13, 22
573967
574512
KEY COVER SOUND DIFFUSION 1 MODULE - MAGN
61
13, 22
573968
574509
KEY COVER 2 FUNCTIONS 1 MODULE - WHITE
53
13
573969
574510
KEY COVER 2 FUNCTIONS 1 MODULE - MAGN
53
13
573970
574513
KEY COVER 2 FUNCTIONS 2 MODULES - WHITE
53
13
573971
574514
KEY COVER 2 FUNCTIONS 2 MODULES - MAGN
53
13
573974
067552
Control bus 1 and 2 gangs - 2 modules
52
11
573975
067554
Control 3 modules bus
52
11
573976
067555
Amplifier bus - 2 modules
61
22
573981
L4566
False celing mounted loudspeaker
61
22
573987
067553
Control for special functions bus - 2 modules
52
11
573988
3495
Insulator for sound sources
62
22
573996
3477
Basic contacts interface
54
14
573998
F441
Audio-video node
61
22
574044
3496
Touch Screen adapter
62
22
574360
574507
KEY COVER REGUL 1M - WHITE R
53
13
574361
574508
KEY COVER REGUL 1M - MAGN R
53
13
574362
574515
KEY COVER UP DOWN 1M - WHITE
53
13
574363
574516
KEY COVER UP DOWN 1M - MAGN
53
13
574382
574533
KEY COVER ON OFF 2M - WHITE
53
13
574383
574534
KEY COVER ON OFF 2M - MAGN
53
13
574384
574535
KEY COVER UP DOWN 2M - WHITE
53
13
574385
574536
KEY COVER UP DOWN 2M - MAGN
53
13
574386
574537
KEY COVER REGUL 2M - WHITE
53
13
574387
574538
KEY COVER REGUL 2M - MAGN
53
13
574388
574539
KEY COVER GEN 2M - WHITE
-
13
574389
574540
KEY COVER GEN 2M - MAGN
-
13
Old
Cat. Nos.
New
Cat. Nos.
573821
573546
573822
Product descriptions
35
Contact details
United Kingdom
Great King Street North,
Birmingham, B19 2LF
Customer Services:
Tel: +44 (0) 845 605 4333 Fax: +44 (0) 845 605 4334
E-mail: [email protected]
Quotations and Technical Support:
Tel: +44 (0) 870 608 9020 Fax: +44 (0) 870 608 9021
E-mail: [email protected]
FOLLOW
US AT
www.legrand.co.uk
www.legrand.ie
www.youtube.com/legrandtvuk
Distributor:
Head office (UK and Ireland):
Legrand Electric Limited
Great King Street North, Birmingham, B19 2LF
Tel: +44 (0) 870 608 9000 Fax: +44 (0) 870 608 9004
Website: www.legrand.co.uk
This document is printed on sustainably sourced paper. Please recycle.
The Legrand logo is a registered trademark
of the Legrand group of companies.
Wiring devices catalogue addendum 07/2013.PDF
www.voltimum.co.uk
www.voltimum.ie
Wiring devices catalogue
Republic of Ireland:
Tel: 01 295 9673 Fax: 01 295 4671
E-mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement