LS FTTH Solutions
Leading Solution
LS FTTH Solutions
Highway to the Ubiquitous Life
FTTH Team
www.lscable.com
www.lsftth.com
12F~17F, LS Tower, 1026-6, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, 431-080, Korea
Tel. 82-2-2189-9114
Ⓒ2009 LS Cable, Ltd. All right reserved. This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation.
No part of this product or document may be reproduced in any form by any means without prior written authorization of LS Cable and its licensors, if any.
Products shown on this catalog are subject to change without any prior notice.
Always with our customers
LS Cable is leading the cable, telecommunication industry.
It also represents the LS Group. With its company vision,
“Always with our customers.” LS Cable continuously drives towards
becoming the global leading company providing the technology as
required by customers and the solution that others cannot offer.
Towards the global leading company
All employees of LS Cable stand behind the vision of becoming Your No.1
Creative Partner and are doing their best to realize our customers’
satisfaction. Securing and establishing a firm growth engine, LS Cable will
be reborn as an enterprise to leap worldwide
Leading Solution
LS aims to develop into a company that provides its clients with a Leading Solution,
contributes to the overall society,
and offers a business environment where the employees can realize their dreams.
Electric Power
Business
Human communication
connecting minds
Main energy artery
lightening the world
Telecommunication
Business
Awakening and changing
prime power
Research &
Development
Broadband Access
Network Equipment
Optical Fibers
Consulting Services
• All ITU-T G.984.x Standard compatible
• Layer 2 and Layer 3 Switch functions
• support full redundancies
• Web-based management
• support TDM services
• Zero Water Peak Fiber
• Bend Intensity Fiber
• Non-Zero DSF
• Laser Optimized Multimode Fiber
• Suggesting Optimized Business Models
• Advanced Network Architecture Design
• Customizing Services for Customers
P2P Solution
• Layer2, 3 Switches
• Aggregate sub-networks
• Customer Premise Equipment
VoIP Solution
• s upport all voice service through
Ethernet network
LS Cable is proud to carry total FTTH solution products ranged from Network Core, RAS, Media
Gateways, G-PON, E-PON, Switching Router, IT Security, IP/VPN Service System, NG SDH/SONET
to Home networks solutions as well as diverse Fiber-optic cables, DATA and Coax cables and
OSP materials. With a long history of serving customers in the industry worldwide, we have
been bringing the total solutions and services to the world by integrating data, voice and video
to build the most innovative and reliable networks for world’s Telco Carriers, ISPs, Government
and enterprise market. With outstanding performance and value-added services, we are
confident in creating the best networking solutions to meet customers’ maximum benefits, and
to foster and guarantee a better quality of service
With the fast development on information and networks infrastructure, broadband applications
such as high definition television (HDTV), video on demand (VOD) and etc are getting popular.
Compared with other communication media, optical fiber obviously has superiority because of
its high bandwidth and tremendously low data loss. Due to these advantageous features, it has
been rapidly developed and gradually replacing with copper wire-based transmission system. At
present, the WAN and MAN markets have been saturated with optical fiber and now the LAN
has also been slowly developed towards the optical fiber transmission. Only the network access
speeds between MAN and LAN markets are still slow, which is commonly called the “Last Mile
Bottleneck”. To solve this problem, optical fiber has increasingly penetrated to the customer
premises. Today, everyone knows that optical fiber is a better solution for increasing network
bandwidth
Thus, now we’re going to propose these value added FTTH solutions to help you to achieve your
prospective last mile solution.
In this product literature, we introduce the turn-key solutions from supply, installation to
maintenance of the FTTH/FTTB equipment and other elements of networking that is necessary
to enable the FTTH network
We aim to create a “Leading Solution” for our customers
Broadband Network
Integration Service
GPON Solution
EPON Solution
• All IEEE802.3ah Standard compatible
• High-density and Cost-effective
Introduction
Fiber Optic
Cable & Connectivity
Outdoor & Indoor Cables
• All areas applicable
Air Blown Solutions
• ABF, ABC, Blown Tube Cables
FTTH Drop Cables
• Flexible and Various
Passive Optical Solutions
• Fiber Distribution Hub
• Optical Splitter
• Fiber Optic Splice Closure
• Optical Distribution Frame
• Optical Termination Box
• Fiber Optic Outlet
• Rack & Cabinet
• Field Installable Connector
• Optical Patch Cords & Adapters
Constructions
• Integrating Various Services
• Effective Network Deployment
• Providing Stable Network Maintenance
Realization of FTTx Total Solution by LS Cable
FTTH
(Residential)
Outlet
Field Installable
optical connector
FTTC FTTH
Outlet
(multi-residentail)
Housing AREA
ABF Solution
GPON ONU
GPON ONT
Splitter
(FTTH, VDSL)
Distrlbution
Apt, Area
Drop Cable
(FTTH, VDSL)
cabinet
Optical Termination Box
Metro Ring
Closure & Splitter
GPON OLT
GPON ONU
Field Installable
optical connector
Optical Distribution Frame
VoIP Gateway
FTTO
Fiber Distribution Hub
cabinet
Access Ring
Telephone Co.
FOC Solution
FDF Patch panel
Router Switch
Distrlbution
ANT
Mobile Co.
CATV Co.
Closure & Splitter
Manhole
Feeder
Duct
GPON Solution
EPON Solution
VoIP Solution
P2P Solution
LS GPON provides downstream capacity of
2.488 Gbps and an upstream capacity of
1.244 Gbps. It is designed to provide high
speed internet service for subscribers and
optimized environments for service
providers.
LS EPON provides various types of Interfaces
and it is designed to fit in any service
provider’s plan and/or environments.
LS VoIP solution is fully compatible with LS
GPON/GPON equipments to complete
service provider’s faultless Triple Play Service
solutions. (VoIP, Video, and Data)
LS P2P solution provides intelligent
networking services like advanced QoS,
rate limiting, high availability, and security
to enhance network operations while
simple network configuration is still
maintained.
Broadband Access Network Equipment
GPON Solution
GPON OLT LST20016
GPON ONU LST2024 GPON ONT LST402 GPON ONT LST110G/111G GPON ONT LST400F
GPON ONT LST020G/022G GPON ONT LST442E/422E GPON ONT LST412V
GPON ONT LST204A
GPON EMS 10
12
14
15
16
17
18
19
20
21
EPON Solution
EPON OLT LSTE9024 EPON ONU LSTE2024FE/LSTE400
EPON ONU LSTE2024DSL
22
24
25
P2P Solution
Router Switch LST3524G
26
VoIP Solution
VoIP Gateway LST320VEF
28
GPON Solution
GPON OLT LST20016
Descriptions
Specification
LST20016 GPON OLT is a full carrier-class, future-proof GPON system that provides
Ethernet, video, TDM and voice services in a single platform with the open
architecture to easily accommodate future service requirements. Based on the ASIC
for GPON functionality, it is flexible and efficient solution for the optical last-mile
network.
General
Protocols and Standards
L2/ 3 wire speed forwarding rate
Full or half duplex operation
Max. 40 1000Base-X or 1000
Base-T) or Max. 2 ports 10Giga interface
40 Ports PON interface
3 Built-in fans 1000RPM/26.8CFM
802.1D Bridge standard(STP)1998 edition
802.1p Priority and Class of Service
standard
802.1Q VLAN standard
802.1s Multiple STP configuration
802.1w Rapid STP configuration
802.1x Authentication
802.3 10BaseT Ethernet standard
802.3u Fast Ethernet standard
802.3z Gigabit Ethernet standard
802.3ab Gigabit UTP standard
802.3x Flow control standard
802.3ad Port trunking
RFC 768 UDP
RFC 783 TFTP
RFC 791, 950, 919, 922 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854, 855 Telnet
RFC 959 FTP
RFC 1112 IGMP
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 1157 SNMP v1, RFC 1905 SNMP v2
RFC 1213 MIB-II
RFC 1293 Inverse ARP
RFC 1305 NTPv3
RFC 1350 TFTP
RFC 1492 TACACS+
RFC 2328 OSPFv2
RFC 1058 RIP v1, 2
RFC 1771 BGPv4
RFC 2131 DHCP
RFC 2474 DiffServ
RFC 4601 PIM-SM
RFC 3569 PIM-SSM
RFC 2663 NAT
RFC 2096 IP Forwarding
RFC 2338 VRRP
ISO10589 IS-IS
RFC 2516
RFC 1757 RMON MIB (4 groups)
RFC 2021, 2074 RMON II
Key Features
Full support of telco-grade power, cooling, reliability and management
•Rack-mountable front-access chassis
•Modular design with dual power, built-in FAN, controller & uplink redundancy
•Universal slot for flexible network design
•GPON modularity with SFP type transceiver
Switching Architecture
High speed non-blocking switch fabric
Store and Forward switching
32K MAC address
4K Active 802.1Q VLAN support
216Gbps switching capacity
Environment-friendly and future-enable system
•Lower CO2 emission due to minimized power consumption
•Support of user-friendly linux-based EMS
Features
Scalable architecture
•Non-blocking 216Gbps throughput switching capacity
•Selective uplink of 10Gbps XFP and 4x1Gbps SFP
•Up to 40 GPON port (ex, 2560 subscriber @64 splitting ratio)
•Support of splitting ratio up to 128
QoS management for triple play service
•L2/L3 switching/routing protocol including RIP, OSPF, BGP
•Multicast protocol of PIM-SM & IGMP
•Tailor-made S/W feature set including PPPoE intermediate agent, DHCP option82
Ordering Information
LST20016
GPON OLT with max. 40 PON ports
Part Name SHF
LST20016 GPON Shelf with 16 slot and FAN
SCU
Packet switching and CPU management
GPU
4-port GPON ports with SFP type
GEU
4-ports 1000BaseX SFP type
XEU
1-port 10Gbit Ethernet with XFP type
TDU
PSU-AC
Power conversion from 110/220VAC to 12VDC
PSU-DC
Power conversion from -48VDC to 12VDC
10
LS FTTH Solutions
Description
Circuit Emulation with 16 E1 ports
ITU-T G.984 compliant
802.1D STP
802.1w RSTP
802.1s MSTP
802.1Q tagged VLAN
Q-in-Q Stacked VLAN
IGMP snooping
IGMP report proxy
Broadcast/Multicast storm filtering
Port/ Flow Base mirroring
Per-port MAC address limiting
MAC address filtering
DHCP Server/ Relay/ Client
DHCP Filtering
NetBIOS, NetBEUI, NBT filtering
802.3ad Link aggregation
RIPv1,2/ OSPF v2/ BGP4/ IS-IS
IP Multicasting (PIM-SM/ SSM,
IGMP v2/3,
IGMP Snooping)
Bandwidth Control (100Kbps unit)
Rate limiting per port and Flow
ACL (Access-Control-List)
QoS, CoS traffic management
CPU protection
RFC 2271 SNMP Management frameworks
RFC 1643 Ethernet MIB
RFC2233 Interface MIB
RFC3195 Syslog
Enterprise MIB
Web-based Management
Management
RFC 854
RFC 959
RFC 783
RFC 1157
RFC 1213
RFC 1493
Telnet
FTP
TFTP
SNMPv1/v2c
MIB-II
Bridge MIB
Physical and Environmental
Dimension (WxHxD) :482x399x240(mm)
Operating Temperature : 0℃ to 50℃
Storage Temperature : -30℃ to 70℃
Humidity : 10% to 90% non-condensing
Power : 110/220VAC 50/60Hz Free Volt,
DC -44 ~ 60VDC
Power Consumption: Max 450W
when option modules populated
ETSI (Many ETSI Environmental specs)
IEC 60950/ EN 60950-1
ETSI/EN 300-019–2.3
ETSI/EN 300-019–2.1
EN 300 386 V1.3.2
EN 55022
EN 61000-4-2, 3, 4, 5, 6
FCC Part 15B
CE/MIC EMI/EMC compliant
LS FTTH Solutions
11
GPON Solution
GPON ONU LST2024
Descriptions
Specification
LST2024 GPON ONU is modular type GPON ONU used in small / medium size business building structures allowing the service
provider to select uplink-interface card for each selected service. The uplink-interface contains GPON interface card and Gigabit
Ethernet interface card.
General
Protocols and Standards
Management
L2 wire speed forwarding rate
Full or half duplex operation
24 ports All Fast Ethernet(100Base-T)
Auto MDI/MDI-X
2 slot for various type of uplink
802.1D Bridge standard(STP)1998 edition
802.1p Priority and Class of Service standard
802.1Q VLAN standard
802.1s Multiple STP configuration
802.1w Rapid STP configuration
802.1x Authentication
802.3 10BaseT Ethernet standard
802.3u Fast Ethernet standard
802.3z Gigabit Ethernet standard
802.3ab Gigabit UTP standard
802.3x Flow control standard
802.3ad Port trunking
RFC 768 UDP
RFC 783 TFTP
RFC 791, 950, 919, 922 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854, 855 Telnet
RFC 959 FTP
RFC 1112 IGMP
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 1157 SNMP v1, RFC 1905 SNMP v2
RFC 1213 MIB-II
RFC 1293 Inverse ARP
RFC 1305 NTPv3
RFC 1350 TFTP
RFC 1492 TACACS+
RFC 2663 NAT
RFC 2096 IP Forwarding
RFC 2338 VRRP
ISO10589 IS-IS
RFC 1757 RMON MIB (4 groups)
RFC 2021, 2074 RMON II
RFC 2271 SNMP Management frameworks
RFC 1643 Ethernet MIB
RFC2233 Interface MIB
RFC3195 Syslog
Enterprise MIB
Web-based Management
RFC 854
RFC 959
RFC 783
RFC 1157
RFC 1213
RFC 1493
Switching Architecture
High speed non-blocking switch fabric
Store and Forward switching
16K MAC address
4K Active 802.1Q VLAN support
Key Features
Flexible architecture for business user
•Rack-mountable main frame with 19” 1RU height
•Modular design with various uplink
- GPON uplink interface with 2.5G for downstream, 1.25G for upstream
- Gigabit uplink interface as 1000BaseT or 1000BaseF
Features
ITU-T G.984 compliant
802.1D STP
802.1w RSTP
802.1s MSTP
802.1Q tagged VLAN
Q-in-Q Stacked VLAN
IGMP snooping
IGMP report proxy
Broadcast/Multicast storm filtering
Port/ Flow Base mirroring
Per-port MAC address limiting
MAC address filtering
DHCP Server/ Relay/ Client
DHCP Filtering
NetBIOS, NetBEUI, NBT filtering
802.3ad Link aggregation
IP Multicasting (IGMP Snooping)
Bandwidth Control (100Kbps unit)
Rate limiting per port and Flow
ACL (Access-Control-List)
QoS, CoS traffic management
CPU protection
Environment-friendly and cost-effective design
•Lower CO2 emission due to minimized power consumption
•24 Built-in 10/100BaseT ports for subscriber
Fully compatible S/W architecture
•Compliant to ITU-T G.984: AES, FEC, DBA, 8 T-cont, 32 Port-ID
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•Remote OAM: Remote download, Alarm, Optical monitoring
Environment-hardened HW
•100/220VAC free voltage input (power consumption < 40W)
•Temperature -20~60℃, Humidity 10~90% (Non condensing)
Ordering Information
LST2024
GPON ONU with 24 port FE and various uplink card
Part Name LMF
GPM
1-port GPON card for uplink
GEM
1-port 1000BaseT card for uplink
GFM
1-port 1000BaseF card for uplink as SFP type
LS FTTH Solutions
Physical and Environmental
Dimension (WxHxD) :483x44x240 (mm)
Operating Temperature : -20℃ to 60℃
Storage Temperature : -30℃ to 70℃
Humidity : 10% to 90% non-condensing
Power : 110/220VAC 50/60Hz Free Volt,
Power Consumption: Max 40W
when option modules fully loaded
Description
12
Telnet
FTP
TFTP
SNMPv1/v2c
MIB-II
Bridge MIB
LST2024 Main Frame with 24FE and 2 uplink slot
LS FTTH Solutions
13
GPON Solution
GPON Solution
GPON ONT LST402
GPON ONT LST110G/LST111G
Descriptions
Descriptions
LST402 GPON ONT is wall-mountable residential equipment supporting the both 4 FE and 2 VoIP interface. This model are
adaptive to deliver IP based service such as high speed data, IPTV, and VoIP.
LST110G/LST111G GPON ONT is wall-mountable residential equipment supporting the 1 FE and 1GE or 1 FE, 1 GE and 2 VoIP
interface, respectively. These model are adaptive to deliver IP based service such as high speed data, IPTV, and VoIP.
Specification
Specification
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :127x170x40 (mm)
•Support of triple service
- 4 x 10/100BaseT ports for subscriber
- 2 x VoIP ports for subscriber
•Remote OAM: Remote download, Alarm, Optical monitoring
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :127x170x40 (mm)
•Supports triple service
- 1 x 10/100BaseT port and 1 x 10/100/1000BaseT port for subscriber
- 2 x VoIP ports for subscriber
•Remote OAM: Remote download, Alarm, Optical monitoring
ITU-T G.984 GPON fully complying GPON interface
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
- Min. 20Km length
•Support single T-CONT mode and multiple T-CONTs mode
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 40 T-cont and 256 Port-ID
•OMCI interface fully meets ITU-T G.984.4 and 983.2
ITU-T G.984 standard fully complying GPON interface
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
- Min. 20Km length
•Support single T-CONT mode and multiple T-CONTs mode
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 40 T-cont and 256 Port-ID
•Standard compliant OMCI interface as defined by ITU-T G.984.4 and G.983.2
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•Up to 256 MAC address and 4 VLAN group
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•MAC address limit and Rate limit
•IGMP v2/v3 snooping for IP-TV multicast service
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•Up to 256 MAC address and 4 VLAN group
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•MAC address limit and Rate limit
• IGMP v2/v3 snooping for multicasting IP-TV service
VoIP service connecting to analog telephone with RJ11 connector
•Embedded DSP for two VoIP protocol (H.248 or SIP)
•Multiple codecs including G.711/G.729/G.723.1
•5-REN per line, blanced ring at 55V RMS and 54ms Echo cancellation
•Support various CLASS services - Caller ID, Call Waiting, Call Forwarding, Call Transfer, Call Toggle, Three Way Calling, Distinctive
Ringing, etc
•G.711 for FAX and T.38 FAX
VoIP service connecting to analog telephone with RJ11 connector for LST111G
•Embedded DSP for two VoIP protocol (H.248 or SIP)
•Multiple codecs including G.711/G.729/G.723.1
•5-REN per line, blanced ring at 55V RMS and 54ms Echo cancellation
•Support various CLASS services - Caller ID, Call Waiting, Call Forwarding, Call Transfer, Call Toggle, Three Way Calling, Distinctive
Ringing, etc
•G.711 for FAX and T.38 FAX
Environment-hardened HW
•12V 3A, AC adaptor (Power consumption <15W)
•Temperature -5~50℃ pt, Humidity 10~85% (Non condensing)
•ETSI, CE certified
Environment-hardened HW
•12V 3A, AC adaptor (Power consumption <15W)
•Temperature -5~50℃, Humidity 10~85% (Non condensing)
•ETSI, CE certified
Ordering Information
Ordering Information
LST402
14
LS FTTH Solutions
LST110G
LST111G
GPON ONT with 4FE and 2VoIP
LST402
LST110G
GPON ONT with 1GEand 1FE
LST110G
GPON ONT with 1GEand 1FE
LST111G
GPON ONT with 1GE, 1FE and 1VoIP
LST111G
GPON ONT with 1GE, 1FE and 1VoIP
GPON ONT with 4FE and 2VoIP
LS FTTH Solutions
15
GPON Solution
GPON Solution
GPON ONT LST400F
GPON ONT LST020G/LST022G
Descriptions
Descriptions
LST400F GPON ONT is the wall-mountable residential equipment optimized for
data only subscriber. It is Isupporting the both of 4 FE and 2 VoIP interface. This
model are adaptive to deliver IP based service such as high speed data, IPTV, and
VoIP.
LST110G/LST111G GPON ONT is wall-mountable residential equipment
supporting the 1 FE and 1GE or 1 FE, 1 GE and 2 VoIP interface, respectively.
These model are adaptive to deliver IP based service such as high speed data, IPTV,
and VoIP.
Specification
Specification
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :110x160x35 (mm)
•Support of triple service
- 4 x 10/100BaseT ports for subscriber
•Remote OAM: Remote download, Alarm, Optical monitoring
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) : 110x160x35 (mm)
•Support of triple service
- 2 x 10/100/1000BaseT ports for subscriber
- 2 x VoIP ports for subscriber
•Remote OAM: Remote download, Alarm, Optical monitoring
GPON interface fully compliant with ITU-T G.984 standard
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
- Min. 20Km length
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
•Standard compliant OMCI interface as defined by ITU-T G.984.4 and G.983.2
GPON interface fully compliant with ITU-T G.984 standard
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
- Min. 20Km length
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
•Standard compliant OMCI interface as defined by ITU-T G.984.4 and G.983.2
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•Up to 1K MAC address and 4 VLAN group
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•IEEE 802.1x port-based and MAC-based network access control
•IGMP v2/v3 snooping/proxy for multicasting IP-TV service
•MAC address flood guard for DoS attack prevention
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•Up to 1K MAC address and 4 VLAN group
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•IEEE 802.1x port-based and MAC-based network access control
•IGMP v2/v3 snooping/proxy for multicasting IP-TV service
•MAC address flood guard for DoS attack prevention
•Classification by L2/L3/L4 field in the packet incoming
•Marking and remarking of COS, DSCP or IP precedence
Environment-hardened HW
•5V 2A, AC adaptor (Power consumption <10W)
•Temperature 0~50℃, Humidity 5~90% (Non condensing)
•ETSI, CE certified
POTS interface with RJ11 connector for LST022G
•Embedded DSP for two VoIP protocol (H.248, H.323v4 or MGCP)
•Multiple codecs including G.711/G.729/G.723.1
•5-REN per line, blanced ring at 55V RMS
•Max of 64msec fixed, adaptive echo cancellation buffer
•CID, DTMF, VAC, CNF, G.168 & T.38 Fax relay
•G.711 for FAX and T.38 FAX
Ordering Information
LST400F
LST020G
GPON ONT with 2GE
LST022G
GPON ONT with 2GE and 2VoIP
16
LS FTTH Solutions
GPON ONT with 4FE
Environment-hardened HW
•5V 2A, AC adaptor (Power consumption <10W)
•Temperature 0~50℃, Humidity 5~90% (Non condensing)
•ETSI, CE certified
LS FTTH Solutions
17
GPON Solution
GPON Solution
GPON ONT LST442E/LST422E
GPON ONT LST412V
Descriptions
Descriptions
As GPON SBU (Single Business Unit) equipment, ONT LST442E/LST422E incorporates interoperability, key customers’ specific
requirements and cost-efficiency. Equipped with ITU-T G.984 compliant, supporting both 4FE and VoIP interface including voice,
video, and high speed internet access. To serve the business customers, it also supports E1 transmission over the PON network,
based on CES (Circuit Emulation) technology.
LST412V GPON ONT is wall-mountable residential equipment supporting the 4FE, 2VoIP as well as 1 RF video.
Specification
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :200x267x66 (mm)
•Supports triple and TDM service
- 4 x 10/100BaseT ports and 2xVoIP ports for subscriber
- 2 or 4 E1 interface for subscriber
Specification
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :200x267x66 (mm)
- Support of triple service as well as TDM service
- 4 x 10/100BaseT ports and 2xVoIP ports for subscriber
- 2 or 4 E1 interface for subscriber
LST442E
ITU-T G.984 fully complying GPON interface
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
LST422E
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•IGMP snooping v2/v3 for IP-TV multicast service
VoIP service connecting to analog telephone with RJ11 connector
•Embedded DSP for two VoIP protocol (H.248 or SIP)
•Multiple codecs including G.711/G.729/G.723.1
•Supports various CLASS services – CID, CW, CF, CT, Call Toggle, Three Way Calling, etc
E1 TDM interface with RJ48 connector using CES technology
•IETF, MEF and ITU-T standard compliant encapsulation
•Conformance with ITU-T G.703 and G.704
•Multiple timing recovering mode
•Selectable system timing sources when applicable
•Compliant with G.823, ETSI EN 300 912 or G.824 specifications clauses dealing with frequency stability and accuracy
Environment-hardened HW
•12V 3A, AC adaptor (Power consumption <15W)
•Temperature -5~50℃, Humidity 10~85% (Non condensing)
•ETSI, CE certified
ITU-T G.984 standard fully complying GPON interface
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•IGMP snooping for IP-TV multicast service
VoIP service connecting to analog telephone with RJ11 connector
•Embedded DSP for two VoIP protocol (H.248 or SIP)
•Multiple codecs including G.711/G.729/G.723.1
•Supports various CLASS services
•CID, CW, CF, CT, Call Toggle, Three Way Calling, etc
Analog RF video interface with 75Ohm F connector
•Compliant to ITU-T G.984.2 for optical specification
- Wavelength: 1540nm~1560nm and Optical input power: -8 ~ +2dBm
•Full RF range 46MHz~870MHz with 14dBmV
•Stability and accuracy
Environment-hardened HW
•12V 3A, AC adaptor (Power consumption <15W)
•Temperature -5~50℃, Humidity 10~85% (Non condensing)
•ETSI, CE certified
Ordering Information
LST442E
GPON ONT with 4FE, 2VoIP and 4 E1
LST422E
GPON ONT with 4FE, 2VoIP and 2 E1
LST412V
GPON ONT with 4FE, 2VoIP and 1 RF video
18
LS FTTH Solutions
LS FTTH Solutions
19
GPON Solution
GPON Solution
Outdoor GPON ONT LST204A
GPON EMS
Descriptions
Descriptions
LST204 is located on the subscriber side over the GPON network to provide multiple services
such as Internet data service, voice service, video service, IPTV, and CATV overlay. This system
is adequate for Fiber To The Home (FTTH).
LST204 is outdoor cabinet type, which basically provides Ethernet 2 ports and POTS (VoIP) 4
ports and mainly installed on the outside of a detached house or a townhouse,. Additionally,
the CATV is available for the option.
LS EMS will provide the service operator centrally monitoring and
management by using fully redundant single application software with the
required hardware platform (Unix platform) with high availability capability
of software, application, database and hardware to proactively manage and
monitor all Active EMS network elements, namely the OLT and the ONU
and its services
Specification
Specification
Simple architecture with user-friendly interface
•Wall mountable outdoor ONT
•Support of triple service and optional RF video TDM service
- 2 x 10/100BaseT ports for subscriber
- 4 VoIP interface for subscriber
Management and monitoring of all the NE with following functionalities:
•Fault Management
•Performance Management
•Configuration Management
•Security Management
GPON interface is fully compliant with ITU-T G.984 standard
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
•Support of ASE-128, FEC, DBA
User-friendly GUI interface in unix-based platform.
•Topology Management : physical and logical graphical topology view.
•Resource Management :record the inventory of the network resources and the service creation.
•EMS Log Management: record of all network and EMS activities and the security audit trail.
•Report Form Management: report for fault alarm, network performance, EMS performance, network activities, service creation
and security audit trail.
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q)
•MAC management and port-based rate limiting
•IGMP v2 snooping for multicasting IP-TV service
Centralized operation and maintenance (O&M) of the NE
•Single EMS platform with In-band management
•Interface and integration with other existing or B/OSS (Business/Operation Support EMS)
VoIP service connecting to analog telephone with RJ11 connector
•Embedded DSP for two VoIP protocol (H.248 or SIP)
•Multiple codecs including G.711/G.729/G.723.1
•Support various CLASS services – CID, CW, CF, CT, Three Way Calling, etc
1+1 active-active server redundancy for high reliability
•High Availability (HA) features in primary and secondary location with its connectivity for southbound and northbound interface.
Environment-hardened HW
•Water-proof outdoor closure
•Built-in splicing tray
•12V 2A, AC adaptor (Power consumption <12W)
•Temperature -5~50℃, Humidity 10~85% (Non condensing)
•CE certified
Web based client access Ordering Information
Ordering Information
LST204A
GPON ONT ODBK
20
LS FTTH Solutions
Outdoor GPON ONT with 2FE and 4VoIP
Outdoor closure for GPON ONT
UNES2000
LS Element Management System
LS FTTH Solutions
21
EPON Solution
EPON OLT LSTE9024
Descriptions
Specification
LSTE9024 EPON OLT is L3 based multi service platform providing flexible
number of GEPON ports and GE ports combination up to 24 ports including
2 x 10G uplink ports for future migration.
Key Features
OLT configuration
•19” rack-mountable main frame: 482mm x 177(mm) x 280(mm), (W x H x D)
•Up to 20 GEPON ports supports for max 640 subscriber accommodation
•Flexible GE(Gigabit Ethernet) uplink interface up to 10xGE ports
•FAN is integrated with main shelf, but it is detachable
General
Protocols and Standards
ISO10589 IS-IS
L2/ 3 wire speed forwarding rate
802.1D Bridge standard(STP)1998 edition
RFC 1757 RMON MIB (4 groups)
Full or half duplex operation
RFC 2021, 2074 RMON II
8 ports All Giga(1000Base-X or 1000
802.1p Priority and Class of Service
standard
Base-T or 100Base-Fx) Installed
802.1Q VLAN standard
RFC 1643 Ethernet MIB
Auto MDI/MDI-X
802.1s Multiple STP configuration
RFC2233 Interface MIB
20 Ports PON interface
802.1w Rapid STP configuration
RFC3195 Syslog
802.1x Authentication
Enterprise MIB
802.3 10BaseT Ethernet standard
Web-based Management
RFC 2271 SNMP Management frameworks
Switching Architecture
802.3u Fast Ethernet standard
High speed non-blocking switch fabric
802.3z Gigabit Ethernet standard
Switching & routing function
•Non-block 24G L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•L3 routing protocol: RIP v1/v2, OSPF v1/v2, BGP+
•IP multicast with PIM-SM/SSM, IGMP v2/3, IGMP snooping
•32K MAC address table & 4K 802.1Q VLAN
•8 ports /group link aggregation (802.3ad)
Store and Forward switching
802.3ab Gigabit UTP standard
Management
32K MAC address
802.3x Flow control standard
RFC 854
Telnet
4K Active 802.1Q VLAN support
802.3ad Port trunking
RFC 959
FTP
RFC 768 UDP
RFC 783
TFTP
RFC 783 TFTP
RFC 1157 SNMPv1/v2c
Features
RFC 791, 950, 919, 922 IP
RFC 1213 MIB-II
802.3ah GEPON
Dual mode operation of GEPON and Turbo GEPON
•IEEE802.3ah MPCP, OAM compliant
•1.25G(DS)/1.25G(US) GEPON for 32 splits (max. 30Mbps BW allocation for subscriber)
•State-of-art 2.5G(DS)/1.25(US) GEPON for 64 splits
RFC 792 ICMP
RFC 1493 Bridge MIB
802.1D STP
RFC 793 TCP
802.1w RSTP
RFC 826 ARP
802.1s MSTP
RFC 854, 855 Telnet
Physical and Environmental
802.1Q tagged VLAN
RFC 959 FTP
Dimension (WxDxH) :440x325x44 (mm)
Network management
•CLI, telnet & SNMP v1/2 based network control
•Remote system upgrade using FTP, TFTP protocol
Q-in-Q Stacked VLAN
RFC 1112 IGMP
Operating Temperature : 0℃to 50℃
IGMP snooping
RFC 2236 IGMP v2
Storage Temperature : -30℃ to 70℃
IGMP report proxy
RFC 3376 IGMP v3
Humidity : 10% to 90% non-condensing
Broadcast/Multicast storm filtering
RFC 1157 SNMP v1, RFC 1905 SNMP v2
Power : 110/220VAC 50/60Hz Free Volt,
Environment-hardened HW
•AC 200~240VAC or DC -42.5~-56.5V (power consumption < 700W)
•Temperature 0~40℃, Humidity 20~80% (Non condensing)
Port/ Flow Base mirroring
RFC 1213 MIB-II
Ordering Information
LSTE9024 EPON OLT with 4FE, 2VoIP and 1 RF video port
Part Name Description
SHF
PIU-E1
1.25G GEPON Line card
PIU-E2
Turbo(2.5G) GEPON Line card
SCU
LST9024 GEPON Shelf with FAN
SCU-PC
CPU unit
SCU-PS
Switch unit
LIU
4-ports 000BaseX SFP Type
XIU
1-port 10G Ethernet XFP type
PSU-PA
AC power unit
PSU-PD
DC power unit
22
LS FTTH Solutions
Per-port MAC address limiting
RFC 1293 Inverse ARP
MAC address filtering
RFC 1305 NTPv3
DHCP Server/ Relay/ Client
RFC 1350 TFTP
DHCP Filtering
RFC 1492 TACACS+
NetBIOS, NetBEUI, NBT filtering
RFC 2328 OSPFv2
802.3ad Link aggregation
RFC 1058 RIP v1, 2
RIPv1,2/ OSPF v2/ BGP4/ IS-IS
RFC 1771 BGPv4
IP Multicasting (PIM-SM/ SSM,
RFC 2131 DHCP
DC -42 ~ 54VDC
Power Consumption: Max 500W
when option modules fully loaded
IGMP v2/3,
IGMP Snooping)
RFC 2474 DiffServ
Bandwidth Control (100Kbps unit)
RFC 4601 PIM-SM
Rate limiting per port and Flow
RFC 3569 PIM-SSM
ACL (Access-Control-List)
RFC 2663 NAT
QoS, CoS traffic management
RFC 2096 IP Forwarding
CPU protection
RFC 2338 VRRP
LS FTTH Solutions
23
EPON Solution
EPON Solution
EPON ONU/ONT LSTE2024FE/LSTE400
EPON ONU LSTE2024DSL
Descriptions
Descriptions
LSTE2024FE provide the EPON uplink and 24FE.
LST2024DSL provide the EPON uplink and 24 VDSL lines, respectively.
Specification
Architecture
•19” Rack mounted ONU: 440mm x 280mm x 44mm
•GEPON uplink interface with 1.25G for down and 1.25G for up
•24 x VDSL ports
LSTE2024
LSTE400
Specification
Architecture
•19” Rack mounted ONU: 440mm x 280mm x 44mm
•GEPON uplink interface with 1.25G for down and 1.25G for up
•24 x 10/100BaseT ports
Key Feature
•Compliant to IEEE 802.3ah: AES, FEC, DBA
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping, STP
•Remote OAM: Remote download, Alarm, Optical monitoring
•QoS : Classification, Marking/Remarking, SPQ, WRR, WFQ
•DHCP relay
Power Supply
•220V AC (Power consumption <100W)
•Dying Gasp
Key Feature
•Compliant to IEEE 802.3ah: AES, FEC, DBA
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping, STP
•Remote OAM: Remote download, Alarm, Optical monitoring
•QoS : Classification, Marking/Remarking, SPQ, WRR, WFQ
•DHCP relay
Operation Environment
•Temperature -5~50℃, Humidity 10~85% (Non condensing)
Power Supply
•220V AC (Power consumption <100W)
•Dying Gasp
Operation Environment
•Temperature -5~50℃, Humidity 10~85% (Non condensing)
Ordering Information
LSTE2024FE
LSTE400
LSTE2024DSL
24
LS FTTH Solutions
EPON ONU with 24FE port
EPON ONT with 4FE port
EPON ONU with 24 VDSL port
LS FTTH Solutions
25
P2P Solution
Router Switch LST3524G
Descriptions
Specification
LST3524G Router Switch is the intelligent Ethernet router
switch to provide the broadband multimedia service.
LST3524G support the carrier-class availability, flexible
scalability and strong security function accommodated by
the professional experience.
General
Protocols and Standards
RFC 1757 RMON MIB (4 groups)
L2/ 3 wire speed forwarding rate
802.1D Bridge standard(STP)1998 edition
RFC 2021, 2074 RMON II
Full or half duplex operation
RFC 2271 SNMP Management frameworks
24 ports All Giga(1000Base-X or 1000
802.1p Priority and Class of Service
standard
Base-T or 100Base-Fx) Installed
802.1Q VLAN standard
RFC2233 Interface MIB
Auto MDI/MDI-X
802.1s Multiple STP configuration
RFC3195 Syslog
4 Ports Gigabit(1000Base-T) Combo
802.1w Rapid STP configuration
Enterprise MIB
Ports
802.1x Authentication
Web-based Management
RFC 1643 Ethernet MIB
802.3 10BaseT Ethernet standard
Key Features
802.3u Fast Ethernet standard
Flexible architecture for business user
•Rack-mountable main frame with 19” 1RU height
•24 port Gigabit interface with 4 port combo interface
Switching Architecture
802.3z Gigabit Ethernet standard
Management
High speed non-blocking switch fabric
802.3ab Gigabit UTP standard
RFC 854
Telnet
Store and Forward switching
802.3x Flow control standard
RFC 959
FTP
Switching & routing function
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•L3 routing protocol: RIP, OSPF, BGP
•IP multicast with PIM-SM/SSM, IGMP v2/3, IGMP snooping
•32K MAC address table & 4K 802.1Q VLAN
•8 ports /group link aggregation (802.3ad)
•802.1w/1s Fast/Multiple Spanning Tree Protocol 지원
32K MAC address
802.3ad Port trunking
RFC 783
TFTP
RFC 768 UDP
RFC 1157 SNMPv1/v2c
RFC 783 TFTP
RFC 1213 MIB-II
RFC 791, 950, 919, 922 IP
RFC 1493 Bridge MIB
4K Active 802.1Q VLAN support
Features
RFC 792 ICMP
802.1D STP
RFC 793 TCP
802.1w RSTP
RFC 826 ARP
Physical and Environmental
802.1s MSTP
RFC 854, 855 Telnet
Dimension (WxDxH) :440x325x44 (mm)
Traffic & security management
•Bandwidth management for each port
•Prevention of CPU overflow
•Broadcast/Multicast storm control
•MAC, DHCP, NetBIOS, NetBEUI, NBT filtering
•MAC address learning limiting per port
•Support of TACACS+
802.1Q tagged VLAN
RFC 959 FTP
Operating Temperature : 0℃ to 50℃
Q-in-Q Stacked VLAN
RFC 1112 IGMP
Storage Temperature : -30℃ to 70℃
IGMP snooping
RFC 2236 IGMP v2
Humidity : 10% to 90% non-condensing
IGMP report proxy
RFC 3376 IGMP v3
Power : 110/220VAC 50/60Hz Free Volt,
Broadcast/Multicast storm filtering
RFC 1157 SNMP v1, RFC 1905 SNMP v2
Network management
•CLI & telnet based control
•SNMP v1/2c based network control
•Support of MIB-II, RMON MIB, Bridge MIB
•Remote system upgrade using FTP, TFTP protocol
Environment-hardened HW
•100~240VAC free voltage input (power consumption < 72W)
•Temperature 0~50℃, Humidity 10~90% (Non condensing)
Ordering Information
26
LST3524G
LS FTTH Solutions
Port/ Flow Base mirroring
RFC 1213 MIB-II
Per-port MAC address limiting
RFC 1293 Inverse ARP
MAC address filtering
RFC 1305 NTPv3
DHCP Server/ Relay/ Client
RFC 1350 TFTP
DHCP Filtering
RFC 1492 TACACS+
NetBIOS, NetBEUI, NBT filtering
RFC 2328 OSPFv2
802.3ad Link aggregation
RFC 1058 RIP v1, 2
RIPv1,2/ OSPF v2/ BGP4/ IS-IS
RFC 1771 BGPv4
IP Multicasting (PIM-SM/ SSM,
RFC 2131 DHCP
IGMP v2/3,
RFC 2474 DiffServ
IGMP Snooping)
RFC 4601 PIM-SM
Bandwidth Control (100Kbps unit)
RFC 3569 PIM-SSM
Rate limiting per port and Flow
RFC 2663 NAT
ACL (Access-Control-List)
RFC 2096 IP Forwarding
QoS, CoS traffic management
RFC 2338 VRRP
CPU protection
ISO10589 IS-IS
DC -42 ~ 54VDC
Power Consumption: Max 74W
when option modules populated
24 SFP Ports and 4 Ports combo Uplink
LS FTTH Solutions
27
VoIP Solution
VoIP Gateway LST320VEF
Descriptions
LST320VEF is the 1.5U rack-mountable voice gateway subsidiary to make
phone call over IP network with various signaling protocol such as SIP, MGCP.
LST320VEF has 2 slots for pluggable I/O interface card for user interface which
is composed of 16 voice port with RJ-11 connector. LST320VEF secures high
quality of voice and provides stable performance. For the purpose of
expanding voice port LST320VEF is cascaded to LST300U ONU and managed
by a GUI based Management System.
Key Features
Flexible architecture for business user
•Rack-mountable main frame with 19” 1.5RU height :193.8mm x 43.7mm x 255.9mm
•Modular design with 2 pl
•2 pluggable I/O slots for VoIP service (Max. 32 port)
•Internal fan controled by temperature sensor
Switching & additional function
•VLAN and bridge feature
•User security by IP access-list
•Remote software upgrade using FTP & TFTP
•IEEE 802.1p packet prioritization
Voice feature
•Various voice codecs: G.723.1, G.729a, G.729b, G.711
•RFC 3261 SIP protocol, H.248 and MGCP
•CID, DTMF, VAD, CNG, G.168 and T.38 G3 Fax Relay
•Max. 32ms fixed, adaptive jitter buffering
•Echo Canceller Length – max. 128ms
•Traffic quering and SNMP MIB v2 for Network Management
•Noise suppression, G.168-2002 Echo cencellation
•Voice quality of over MOS 4.0
Environment-hardened HW
•200~250VAC free voltage input (power consumption < 80W)
•Temperature 0~50℃, Humidity 10~90% (Non condensing)
Environment-hardened HW
•100~240VAC free voltage input (power consumption < 72W)
•Temperature 0~50℃, Humidity 10~90% (Non condensing)
Ordering Information
LST320VEF
VoIP Gateway for business users
Part Name Description
MDU
LST320VEF Main Frame with 2 slot
VC16
Voice Card with 16 VoIP interfaces
28
LS FTTH Solutions
LS FTTH Solutions
29
Optical Fibers and Cables
Air Blown Solutions
FTTH Drop Cables
Connectivity
LS Cable brings you from G652D to G657
Optical Fibers and various Optical Fiber Cables
at its best quality
LS Cable’s Ez blowing system, our own cost
effective and time saving ABF solution,
simply made the optical network so easy.
LS Cable’s various types of Drop Cables are
featuring the last mile FTTH network.
LS Cable’s various types of Drop Cables are
featuring the last mile FTTH network.
Fiber Optic Cable and Connectivity
Optical Fibers and Cables
Zero Water Peak Fiber (G652.D)
Bend Insensitive Fiber (G657)
Nivzero DSF (G655)
Laser Optimized Multimode Fiber
Outdoor Cable/Indoor Cable
32
33
34
35
36
Air Blown Solutions
Air Blown Solutions Overview
Air Blown Fiber Unit (EPFU)
3.5/5mm Outdoor Micro Duct
3.5/5mm Indoor Micro Duct (LSZH)
Air Blown Cable (Ez Blow® Micro ABC)
Micro Duct (Direct Install) for Ez Blow® Micro ABC
Micro Duct (Direct Bury) for Ez Blow® Micro ABC
38
40
42
43
44
46
47
FTTH Drop Cables
Flat Type Drop Cable Overview
48
Flat Type Drop Cable
Figure-8 Type Aerial Drop Cable
Round Type Drop Cable
Connectivity
Fiber Distribution Hub (FDH)
Splitter & Panout Splitter
Mount Splitter on ODF
Fiber Optic Splice Closure
Optical Distribution Frame (ODF)
Optical Termination Box
Fiber Optic Outlet
Fiber Distribution Rack
Ez-SC, Field Installable Optical Connector
Ez-SC Assembly Procedure
Optical Patch Cords & Adapters
30
LS FTTH Solutions
LS FTTH Solutions
50
52
53
54
56
57
58
59
62
63
64
31
Optical Fibers and Cables
Optical Fibers and Cables
Zero Water Peak Fiber (G652.D)
Bend Insensitive Fiber (G657)
WAVE-s
WAVE-s
Descriptions
Descriptions
•Extremely low water peak
•Full spectrum from 1260nm to 1625nm
•Designed to cover the entire wavelength
•Germanium doped core and silica cladding
•Dual protective arylate coating applied over fiber
•Environmental-proof tested and complying ITU-T Standards
Key Features
Key Features
0.6
Over 50% More spectrum
•Optimum dispersion
For 10 Gb/s
•Low cost operation
0.5
PMD[ps/ km]
Attennation (dB/km)
•Long term attenuation reliability by absence of hydrogen aging defects
•Excellent geometrical properties for active alignment splicing technique
•Extremely low PMD performance
•Bend Insensitivity at 20Φ bending
•Low water peak grade attenuation
•G657.A : Compatible with G652.D
•G657.B : FTTH optimized bending performance
Maximum bending radius (G652.D vs. G657)
G652.D
60
0.50
40Gb/s
0.20
10Gb/s
0.4
0.10
Average 0.280dB/km
@1383±3nm
0.3
2.5Gb/s
30
G657
0.05
0.03
0.2
0.1
1100
1200
1300
1400
1500
1600
0.01
10
3
10
Wavelength (nm)
5
10
7
10
Transmission [km]
The PMD link design value is a term used to describe the PMD of concatenated
lengths of fiber (also known as PMDQ). This value represents a statistical upper limit
for total link PMD. Individual PMD values may change when cabled.
Optical Properties
Optical Properties
1310nm
≤0.34
dB/km
1383nm
≤0.31
dB/km
1490nm
≤0.21
dB/km
1310nm
≤0.35
dB/km
1550nm
≤0.20
dB/km
1383nm
≤0.34
dB/km
1625nmâ
≤0.21
dB/km
1490nm
≤0.21
dB/km
Mode Field Diameter
1310nm (typical)
9.2
㎛
1550nm
≤0.21
dB/km
1550nm (typical)
10.4
㎛
1625nm
≤0.22
Cable
≤1260
nm
Mode Field Diameter
1310nm (typical)
8.9
1550nm
≤18
ps/(nm·km)
Cutoff Wavelength
Cable
≤1260
Chromatic Dispersion
1625nm
≤22
Ps/(nm·km)
1550n
≤18
ps/(nm·km)
Zero Dispersion Wavelength
1310~1324
nm
1625nm
≤22
ps/(nm·km)
Slope @λo
≤0.092
ps/(nm2·km)
Chromatic Dispersion
ø32mm 1550nm
≤0.03
dB
Slope @λo
Attenuation
Cutoff Wavelength
Attenuation
G657.A
Zero Dispersion Wavelength
G657.B
dB/km
8.6
1310~1324
≤0.092
100turns,ø50mm 1310nm & 1550nm
≤0.03
dB
Macrobending
1 turn, ø20mm 1550nm
≤0.3 ≤0.05
100turns, ø60mm 1625m
≤0.03
dB
Attenuation
1 turn, ø20mm 1625nm
≤1.0 ≤0.2
Link Design Valueâ
≤0.06
ps/√km
Maximum Individual Fiberâ
≤0.2
ps/√km
Macrobending Attenuation1turns,
PMD
32
LS FTTH Solutions
PMD
㎛
nm
nm
ps/(nm2·km)
dB
dB
Link Design Value
≤0.06
ps/√km
Maximum Individual Fiber
≤0.2
ps/√km
LS FTTH Solutions
33
Optical Fibers and Cables
Optical Fibers and Cables
Nonzero DSF (G655)
Laser Optimized Multimode Fiber
DreamLightTM
GigaTM
Descriptions
Descriptions
LSC DreamLightTM is designed for long-haul, high data rate and high capacity DWDM system.
By optimizing dispersion and effective area, the generation of non-linear effects in 50 GHz channel spacing system is successfully
surpassed.
•High performance Laser Optimized MMF produced using sophisticated MCVD process
•High bandwidth and low attenuation to ensure attenuation margin in LAN/WAN
•Uniform DMD profile for 10Giga data rate
Key Features
•Provide optimum performance for 10Gb/s 50GHz channel spacing in the C band
•Make it feasible the next generation 40 Gb/s transmission system
•Compatible with future DWDM amplifier regions such as S band
•Wide band design provide CWDM application
•Enhanced PMD performance
SAN
Internet Data
Center
DWCM
ch.16
10Gb/s
10~40km
Access
80
80
80
80
ch.2
ch.4
DCF
0
Switch
ch.1
ch.6
-23
LAN
Switch
Fiber Offset(µm)
Servers
TM
ch.5
LAN Enterprise
Eye diagram of ch1 & ch16
Transmission experiment set-up
DreamLight Enhanced
ch.1
ch.3
DMD~0.17 ps/m
WAN/MAN
Cerral/Office
DCF
23
Servers
0.0
1.0
2.0
3.0
4.0
5.0
Model Delay(ns)
Disk Array
ch.7
ch.8
ch.9
10Gb/s
MOD
50 ps/div
50 ps/div
ch.10
DCF
ch.11
Measured spectra after 320 km
ch.12
ch.13
ch.14
10Gb/s PIN Receiver
Optical Properties
ch.15
ch.16
1550.92 ~ 1556.55 nm
OSNR ~ 25.5 dB
Q-factor > 21dB
B E R ~ 1 0 -29
Characteristics
Units
Attenuation coefficient
dB/km
Attenuation
1550nm
Mode Field Diameter
1310nm (typical)
Cutoff Wavelength
Cable
A
1625nm
B
OM3 (50um)
850nm
≤2.4
≤ 2.8
≤2.4
1300nm
≤0.6
≤ 0.7
≤0.6
≥500 / 1000
≥ 200 / 600
≥1500 / 500
≥ 400 / 800
≥140 / 400
≥400 / 800
Bandwidth
MHz.km
Premium
850nm / 1300nm
dB/km
≤0.24
dB/km
㎛
9.3
62.5um
≤0.22
9.6 50㎛
Optical Properties
Standard
850nm / 1300nm
Laser Bandwidth
MHz.km
nm
Chromatic Dispersion
1530~1565nm
2~6 5.5~10
ps/(nm·km)
Numerical Aperture
Zero Dispersion Wavelength
≤1520 ≤1440
nm
DMD
Link Design Value
≤0.1
ps/√km
10G Transmission
Maximum Individual Fiber
≤0.2
ps/√km
Distance
PMD
34
LS FTTH Solutions
≤1480
850nm
(typical)
0.2
0.275
≥2000
0.2
ps/m
≤0.30
m
300
LS FTTH Solutions
35
Optical Fibers and Cables
Outdoor Cable/Indoor Cable
Outdoor Cable
Type
Construction
Fiber count
Feature
2~576
Construction
Figure-8 type
2~288
LS offers various cables with increased fiber density and easy deployment for a
wide range of installations, including duct, aerial (lashed and self-supporting),
direct buried, and outdoor/indoor.
Marine &
Ribbon
CentralLoose Tube
24~432
Fiber count
Feature
Figue-8 type optical cables are self-supporting aerial cables that are designed for
easy and economical installation.
The Loose tube designs from LS Cable meet the needs for customer's
requirements, and provide excellent performance.
Multi Loose Tub
Type
2~48
Off-Shore
The Central Ribbon Cable designs meet the needs of the variety of applications.
The loose tube design provides stable performance over a wide temperature
range and is compatible with any grade optical fiber.
The LS's Marine and Offshore fiber optic cables is designed especially for the
harsh environments of commercial marine vessels, oil platforms and other similar
applications.
L ow smoke/zero halogen, flame retardant cables offer the versatility and ease of
use of our other offshore cables in a construction suited for marine applications.
These cables are available in all dry designs with dielectric and metallic sheath.
Indoor Cable
The Central Ribbon Cable designs meet the needs of the variety of applications.
Ribbon
Multi Loose
72~864
Type
Construction
Fiber count
Feature
Ribbon cable can be deployed in a limited space, while streamlining fiber
termination and saving time and money with easy mass fusion splicing.
These cables are available in all dry designs with dielectric and metallic sheath.
Simplex &
Duplex cord
1 or 2
S hort Run Office & Computer Room Cabling Patch cords, Pigtails and Jumpers
Equipment Interconnects
OFNR(riser rated), OFNP(plenum rated) or LSZH(low smoke zero halogen rated)
LS's ribbon slot cable provides excellent optical transmission and physical
Ribbon Slot
4~1000
performance. Ribbon slot cable is a design that has high tensile strength and
flexibility in a compact cable size for use in conduit, direct buried and aerial
applications.
Micro Unit
ADSS
2~144
2~288
High capacity & fiber density Advanced "dry"water blocking materials
Virtually gel-free design Rapid installation (small & lightweight)
Easy break-out of bundles & tubes (QAW)
Distribution
(single Unit)
Distribution
(Sub Unit)
2 ~ 24
T Distribution cables are rugged, high performance optical communication cables
for inside plant installations Backbone & Computer Room Cabling Compact
design for limited conduit space OFNR(riser rated), OFNP(plenum rated) or LSZH
(low smoke zero halogen rated)
24 or 144
The Central Ribbon Cable designs meet the needs of the variety of applications.
Ribbon cable can be deployed in a limited space, while streamlining fiber
termination and saving time and money with easy mass fusion splicing.
These cables are available in all dry designs with dielectric and metallic sheath.
istribution cables are rugged, high performance optical communication cables
D
for inside plant installations
DSS Optical Cables are all-dielectric, self-supporting aerial cables designed for
A
easy and economical installation.
High modulus aramid yarns provides high tensile strength and long term
reliability.
Breakeout
2~12
Backbone & Computer Room Cabling
Compact design for limited conduit space
OFNR(riser rated), OFNP(plenum rated) or LSZH (low smoke zero halogen rated)
Direct Termination on 2.0 mm Sub-Unitsns.
36
LS FTTH Solutions
LS FTTH Solutions
37
Air Blown Solutions
Air Blown Solutions Overview
Air Compressor
Air Compressor
Air Blown Cable
Blowing Head
Blowing Head
Blown tube Cable
Blown tube unit
Blown tube Cable
Direct Install Tub
Cable(in Duct)
Access Chamber
Gas-Seal Unit
CSSP
Customer Premises
Customer Splice and Spilt
(various capacities)
Internal Customer Lead-In
Fibre Optic Cable
to ONU or ONT
TELECOM
External Customer Lead-In
Low Fire Hazard Tube Cable
Exchange, or Optical Node
4DI or 7DI
4DI or 7DI
4DI or 7DI
Direct Bury Tube Cable
4DI or 7DI
38
LS FTTH Solutions
LS FTTH Solutions
39
Air Blown Solutions
Air Blown Fiber Unit (EPFU)
2 Fiber Unit (with ripcord)
Optical Properties
Diameter
1.02 ± 0.06
Weight
0.90 ±0.05
Fibers colors
Fiber Type
Blue, Orange
SM, 50MMF, 62.5MMF
single Mode
Wavelength
(nm)
(G. 652b)
Multi Mode
(50/125)
OM2
Multi Mode
(50/125)
OM3
Multi Mode
(50/125)
OM3+
850
-
-
3.5
2.6
2.6
2.6
0.38
0.36
1.0
0.8
0.8
0.8
1383
-
0.36
-
-
-
-
1550
0.28
0.25
-
-
-
-
850nm
Min. Modal
-
-
200
500
1500
3500
850nm
Effective
Modal
-
-
2000
4700
1300/1310
-
-
500
500
4
Fiber Unit
Multi Mode
(62.5/125)
OM1
1300/1310
Maximum Attenuation
[dB/km]
LWPF
Single Mode
(G.652d)
Bandwidth
[Mhz.km]
Diameter
1.02 ± 0.06
Weight
0.90 ±0.05
Fibers colors
Fiber Type
-
600
500
Blue, Orange, Green, Red
SM, 50MMF, 62.5MMF
Mechanical & Environmental Properties
8
Fiber Unit
Diameter
1.40 ± 0.05
Weight
1.70 ±0.05
Fibers colors
Fiber Type
Blue, Orange, Green, Red, Grey, Yellow, Brown, Violet
SM, 50MMF, 62.5MMF
12
Fiber Unit
Diameter
Weight
1.55 ± 0.07
2.20 ±0.05
Fibers colorsBlue, Orange, Green, Red, Grey, Yellow,
Brown, Violet, Black, White, Pink, Turquoise
Fiber Type
SM, 50MMF, 62.5MMF
Item
Standard
Test Condition
PASS
9.81 X W N
Tensile Strength
IEC 60794-1-2 E1
(W: mass of 1km)
Residual Fiber strain: ≤ 0.05%
No change in Attenuation After test
No significant damage
PASS
No change in Attenuation After test
No significant damage
40mm (2 & 4 F)P
60mm (8 F)
ASS
No change in Attenuation After test
No significant damage
PASS
SMF ≤ ±0.5dB/km (1310, 1550nm)
MMF ≤ ±0.25dB/km (850, 1300nm)
-10 °C ~ 65 °C
PASS
for 10cycles
SMF ≤ ±0.07dB/km (1310, 1550nm)
RH : 93%
MMF ≤ ±0.25dB/km (850, 1300nm)
Crush
Bend
Cold Test
IEC 60794-1-2 E3
100N 60seconds
IEC 60794-1-2 E11
BS EN 60068-2-1
Change of BS EN 60068-2-38
Temperature
(Condensation)
-20 °C 96hrs
LS FTTH Solutions
Fiber strain Max. load: ≤ 0.4%
Cycle Duration: 24Hrs
-10 °C ~ 60 °C
for 3cycles
PASS
Temperature Cycle
SMF ≤ ±0.07dB/km (1310, 1550nm)
MMF ≤ ±0.25dB/km (850, 1300nm)
PASS
SMF ≤ ±0.07dB/km (1310, 1550nm)
MMF ≤ ±0.25dB/km (850, 1300nm)
IEC 60794-1-2 F1
+20°C ± 2.0°C
for 2000Hrs
40
Performance
Water Immersion
CW 1500 Part4 3.2.4
LS FTTH Solutions
41
Air Blown Solutions
Air Blown Solutions
3.5/5mm Out door Micro Duct
3.5/5mm Indoor Micro Duct (LSZH)
Features & Benefits
Features & Benefits
•The tube bundle is protected by a polyethylene sheath with an
aluminum water barrier bonded inside.
•No tensile risk to fibers, since they are installed later.
•Can be customized to suit user requirements
•Low weight, low cost product, with great flexibility
•DB bundles have all the advantages of the DI design, but with an
additional tough sheath that acts like a subduct once buried, with
superior resistance to crush, distortion and corrosion.
•The tube cables with flame retardant material
•No tensile risk to fibers, since they are installed
later, when required-2 Low Smoke Emission
2
3
and no contains halogens- Low installation
tension
required 7
3
7
1
1
•Can be customized to suit user requirements
2
2
3
7
7
3
1
1
Product List and Installation Guide Line (Direct Install)
No. of Tube
5
5
5
5
4
6
4
6
4
6
4
6
Product List and Installation Guide Line
Nom. O.D.
(mm)
Min. Bend
Radius (mm)
Tensile
(N)
Nom. Weight
(kg) Max. Drum
Length (m)
85
500
50
4000
No. of Tube
Nom. O.D.
(mm)
Min. Bend
Radius (mm)
Tensile
(N)
Nom. Weight
(kg) Max. Drum
Length (m)
1
8.4
2
8.5 X 13.5
135
800
78
4000
1
7.4
75
100
35
4000
4
15.4
300
1200
121
4000
2
7.4 x 12.4
150
250
80
4000
7
18.5
280
1700
167
4000
4
14.5
290
400
130
4000
12
23.7
355
2500
247
2000
7
17.4
265
600
195
4000
19
27.8
420
3300
338
2000
12
22.8
345
900
310
2000
24
33.0
500
3800
440
2000
19
26.7
400
1300
440
2000
24
32.5
490
1800
585
2000
Product List and Installation Guide Line (Direct Bury)
No. of Tube
Nom. O.D.
(mm)
Min. Bend
Radius (mm)
Tensile
(N)
Nom. Weight
(kg) Max. Drum
Length (m)
1
10.0
85
600
67
4000
2
10.5X15.5
135
800
115
4000
4
19.4
300
1500
162
4000
7
22.3
280
1800
208
4000
12
28.3
355
2700
377
2000
19
31.1
420
3500
485
2000
24
36.8
500
4400
560
2000
Mechanical Properties
Item
Standard
Tensile Strength
IEC 60794-1-2 E1
Mechanical Properties
Item
Standard
Tensile Strength
IEC 60794-1-2 E1
Crush
IEC 60794-1 E2
42
LS FTTH Solutions
Test Condition
Applied load
refer to Tensile
above Table
5 minute
700N 60seconds for
Direct In stall type and 1,000N 60seconds for Direct In Bury type
Performance
PASS
No permanent damage, or localized
diameter reductions greater than 7%
PASS
No permanent residual deformation
greater than 15%, no splitting,
nor permanent damage
Test Condition
Applied load
refer to Tensile
above Table
5 minute
Performance
PASS
No permanent damage, or localized
diameter reductions greater than 7%
300N 60seconds
Crush
IEC 60794-1-2 E3
then removed.
Wait 1hour
PASS
Flame retardant
IEC60332-1 & 3
PASS
Smoke emission
IEC61034-1/2
PASS
Halogen contents
IEC60754-1
PASS
Acidity
IEC60754
PASS
No permanent residual deformation
greater than 15%, no splitting,
nor permanent damage
LS FTTH Solutions
43
Air Blown Solutions
Air Blown Cable (Ez Blow® Micro ABC)
Features & Benefits
Schematic Air blown cable installation route (96 F Ez Blow™ Micro ABC)
•All dielectric Single Jacket Multi Loose Tube cables are UV-stabilized,
fully water blocked for Micro duct applications.
•Loose tube design provides stable and highly reliable transmission
parameters for a variety of voice, data, video and imaging
applications.
•This lightweight cable offers durability and flexibility required for
many outside plant uses.
•RoHS (Restriction of the use of Certain Hazardous Substances
Directive)
•Telcordia GR-20-CORE
•IEC 60793 / IEC 60794
Optical Fiber
Filling Compound
Loose Buffer Tubes
Strength Member
Water Blocking Yarn
Binder Yarn
Ripcord
Jacket
Start
Bending Diameter : 1.2m
End
Specification Sheet
Items
Fiber Counts
Outer Diameter (mm)
Cable Weight (kg/km)
Specifications
144
Nom. 8.9
67
A
B, D, F
C
400m
Straight
E
40m
Entering street side cabinet making 180°turn in the cabinet
G
500m
Straight
90
45
120
60
140
70
180
90
Maximum Tensile
Loading (N)
Incidental
Residual
450
150
600
150
900
250
1000
300
Installation
-10℃ ~ +40℃
-10℃ ~ +40℃
-10℃ ~ +40℃
-10℃ ~ +40℃
Operation
-40℃ ~ +70℃
-40℃ ~ +70℃
-40℃ ~ +70℃
-40℃ ~ +70℃
Storage
-40℃ ~ +70℃
-40℃ ~ +70℃
-40℃ ~ +70℃
-40℃ ~ +70℃
Sheath material
Fiber Type
Recommendation of Duct Size
(ID/OD mm)
Nylon or HDPE
150m
Straight
Diameter 1.2m
360°turn in a manhole
Test Result from Blowing of 96F Ez Blow™ Micro ABC in Test Site (Micro duct size O.D/I.D: 10/8mm)
•The micro cable was blown the total length of 1100 m in just over 35 minutes in this test.
•The cable comparing with others in the market has excellent blowing performance.
G.652b & d SMF, 62.5MMF(OM1), 50MMF(OM2, OM3, OM3+)
Installation Speed
5.5/7
6/8
8/10
8/10
Blowing Distance
2000m
2000m
8/10
10/12
10/12
12/14
1000m
2000m
1000m
2000m
Time
120
100
50
40
80
30
60
20
40
10
20
0
0
0
Shipping Information
200
400
600
800
1000
1200
Distance (m)
Standard Reel Length
4000m
Time (mim)
Remark
96
Nom. 6.8
48
Installation
Residual
Length
Max 72
Nom. 5.8
28
Minimum Bending
Radius (mm)
Temperature Range
Route
Max 24
Nom. 4.5
19
Installation Speed (m/mim)
Items
Equipment
Specifications
•PR-140 from Plumettaz with 6.1~6.5mm
steel tire (U-groove)
Compressor
•KAESER M12E
- Air capacity (FAD) : 0.82 m³/min
- Working pressure : 13.0 bar (g)
•Start to install the cable 100m without any air (120m/mim)
•Gradually increase the airflow as shown
in the installation manual
Installation
method
* Graph showing test result from blowing of micro ABC in test site.
* Other Cable lengths may be available upon request.
44
LS FTTH Solutions
LS FTTH Solutions
45
Air Blown Solutions
Air Blown Solutions
Micro Duct (Direct Install) for Ez Blow® Micro ABC
Micro Duct (Direct Bury) for Ez Blow® Micro ABC
Features & Benefits
Features & Benefits
•The tube bundle is protected by a polyethylene sheath with an aluminum water barrier
bonded inside.
•No tensile risk to fibers, since they are installed later.
•Can be customized to suit user requirements
•Low weight, low cost product, with great flexibility
•DB bundles have all the advantages of the DI design, but with an additional tough sheath
that acts like a subduct once buried, with superior resistance to crush, distortion and
2
corrosion.
3
7
•No tensile risk to fibers, since they are installed later.
1
•Can be customized to suit user requirements
2
2
3
7
4
6
No. of Tube
1
4
6
2
7
3
1
4
6
4
6
5
Product List and Installation Guide Line
Tube Size
(O.D./I.D.)
3
1
1
5
7
5
5
Product List and Installation Guide Line
Nom. O.D.
(mm)
Min. Bend
Radius (mm)
Tensile
(N)
Max. Drum
Length (m)
Tube Size
(O.D./I.D.)
No. of Tube
Nom. O.D.
(mm)
Min. Bend
Radius (mm)
Tensile
(N)
Max. Drum
Length (m)
13.7
150
800
2000
1
13.7
170
1000
2000
10/8
2
13.7 X 23.7
150
1200
2000
2
26.6 X 16.6
170
1500
2000
4
27.9
420
2000
2000
10/8
4
30.9
470
2200
2000
7
33.8
510
2700
2000
7
36.6
560
3000
1000
1
15.4
160
1100
2000
1
20.8
250
1800
2000
12/10
2
15.4 X 27.4
160
1800
2000
4
32.8
500
2700
7
39.8
600
3500
Mechanical Properties
Item
2
20.8 X 32.8
250
2700
2000
2000
12/10
4
37.8
570
3300
1000
1000
7
44.8
680
4700
1000
Mechanical Properties
Standard
Tensile Strength
IEC 60794-1-2 E1
Test Condition
Applied load
refer to Tensile
above Table
5 minute
Performance
PASS
No permanent damage, or localized
diameter reductions greater than 7%
Item
Standard
Tensile Strength
IEC 60794-1-2 E1
Test Condition
Applied load
refer to Tensile
above Table
5 minute
Performance
PASS
No permanent damage, or localized
diameter reductions greater than 7%
PASS
PASS
No permanent residual deformation
No permanent residual deformation
700N 60seconds
then removed.
Wait 1hour
Crush
IEC 60794-1-2 E3
46
LS FTTH Solutions
greater than 15%, no splitting,
nor permanent damage
1000N 60seconds
then removed.
Wait 1hour
Crush
IEC 60794-1-2 E3
greater than 15%, no splitting,
nor permanent damage
LS FTTH Solutions
47
FTTH Drop Cables
FTTH Drop Cable Overview
Figure-8 Type Aerial Drop Cable
- Suitable outdoor application (Aerial Installation)
- Flame Retardant PU or LSZH jacket is available
- Metal or dielectric messenger wire is available
- Field installable connector (Ez-SC) is available
- It is possible to supply Pre-connectorized type
- ITU-T G.657A, B fiber is available
I Mechanical Characteristics
Outet
(page 60)
Fiber
Count
Nominal
Diameter
[mm]
Nominal
Weight
[kg/km]
Maximum
Tensile Load
[N]
Crush Load
[N/cm]
1, 2
5.0 x 2.9
11
1000N
50kg/50mm
I Environmental Characteristics
Terminal Box
(page 표시)
Operation Temperature
- 40 to +70°C
Storage Temperature
- 40 to +70°C
Patch cord
(page 표시)
Patch cord Drop Cable
(page 63)
Filed Installable connector
(page 61)
Round Type Drop Cable
Flat Type Drop Cable
- Suitable In/outdoor application
(Duct and Aerial Installation is possible)
- Suitable for Indoor & duct application
- Flame Retardant PU jacket is applied
- Flame Retardant LSZH jacket is applied
- Small size and light weight
- Excellent crush and impact resistance
- Field installable connector (Ez-SC) is available
Termination Box
(page 59)
- Field installable connector (Ez-SC) is available
- It is possible to supply Pre-connectorized type
- It is possible to supply Pre-connectorized type
- ITU-T G.657A, B fiber is available
- ITU-T G.657A, B fiber is available
I Mechanical Characteristics
I Mechanical Characteristics
Fiber
Count
Nominal
Diameter
[mm]
Nominal
Weight
[kg/km]
Maximum
Tensile Load
[N]
Crush Load
[N/cm]
1, 2
1.9 x 3.5
10
150
50kg/50mm
Street Cabinet
PDF (page 표시)
Rack (page 표시)
ODF (page 58)
I Environmental Characteristics
Operation Temperature
- 20 to +70°C
Storage Temperature
- 30 to +70°C
Closure
(page 56)
Fiber
Count
Nominal
Diameter
[mm]
Nominal
Weight
[kg/km]
Maximum
Tensile Load
[N]
Crush Load
[N/cm]
1
3.0
8
500
50kg/50mm
I Environmental Characteristics
Operation Temperature
- 40 to +70°C
Storage Temperature
- 40 to +70°C
Manhole
Closure
48
LS FTTH Solutions
LS FTTH Solutions
49
Connectivity
Fiber Distribution Hub (FDH)
Descriptions
Distribution Type
LS Cable Fiber Distribution Hub is designed to provide a local convergence point
for outside plant FTTH application, housing optical splitters that connect feeder
cables from the central office to distribution cables serving customer premises. The
FDH can accommodate trays for splitter modules, they provide termination and
storage functions. The FDH has splitter capacity for 1x32, 1x16 and dual 1x8
modules. All splitter modules are compatible with all sized of FDH. All components
of the FDH shall be of high quality design, workmanship and finish.
Features
•Intelligent design
•Simple and clearly arranged cable management
•Integrated slack storage spool
•All front access
•Accommodates 12 or 24 splitter modules
•IEC 529 IP-54 Protected
FODH Series
Specification
PARAMETER
Dimension(H x W x D)
Splitter Module Type
Cable port(In/Out)
Cable Diameter
Adaptor Type
No. of Adaptor
FODH-288-A
FODH-432-A
1100mm x 720mm x 520mm
990mm x 1320mm x 520mm
Max. Capacity
288
432
No. of Splitter Module
12
24
1:4 / 1:8 / 1:16 / 1:32
1/2
2/4
Max.20 mm
SC / FC
288
432
Input Parking Lot
Max.12
Max.24
Output Parking Lot
Max.48
Material
Mounting Options
Max.96
Splitter Module Specification
Aluminum
Ground / Pedestal / Pole
Part Number
ODFH-SPMD - ① - ②
Material
Module
Case
Dimension
(L x W x D, mm)
Connector Type
① Splitter Module type
A : 1:4
B : 1:8
C : 1:16
D : 1:32
50
LS FTTH Solutions
Stainless Steel
(*other material available)
150 x 80 x 15
(*other type available)
SC/APC
(*other type available)
② Connector type
SC/PC
SC/APC
FC/PC
FC/APC
* Other type available
LS FTTH Solutions
51
Connectivity
Connectivity
Splitter & Panout Splitter
Mount Splitter on ODF
Descriptions
Descriptions
LS Cable supply high performance PLC (Planar Lightwave Circuit)
Splitter Modules which are GR-1209-CORE, GR-1221-CORE
requirements compliant. A single mode 1 x N Splitter has one input
port and output ports (N) for dividing an optical signal.
•Rackmount Type Splitter is FTTH-Ready component and useful to set-up at a rack type system in a central office such as
Equipment Room (ER) or Telecommunication Room (TR).
•There is no need to handle splitter module or optical fiber because all components are inside the frame.
•It includes a splitter inside the rackmount. (4ch, 8ch, 16ch, 32ch available)
Key Features
•Same as LS’s Panout Splitter
•Fiber Termination/Connection Ports Option
•Optical Splice Capability
•Compact Design
•Compatible with most cable management system
Key Features
•Low Insertion Loss
•Good Uniformity
•Wide Operation Wavelength Range
•Ultra Small Design
•Low P01
•GR-1209 & 1221-CORE Compliant
•Fine Tuning of FHD & PECVD
1XN Splitter Chip
Silcon Molding
Applications
•Same as LS’s Panout Splitter
Lid
1ch Silcon Fiber array
Nch Slicon Fiber array
Part Number
Applications
FOSP-①-②-③④
•FTTH, FTTB, FTTC
•CATV networks
•PON (Passive Optical Network) System
•Fiber Optic Equipment and System
① Mount type
Specification Sheet
Model
1xN or 2xN
1x4
F: PANOUT type splitter
1x8
R: mount Splitter on Rack mount ODF
1x16
W: mount Splitter on wall mount cassette
1x32
C: mount Splitter on closure tray
1x64
2x4
FOSP1x4
FOSP1x8
FOSP1x16
1 x 4
1 x 8
1 x 16
Packing 40 x 4 x 4
Size (mm)
② In x out
S: Splitter
40 x 4 x 4
or
50 x 5 x 4
FOSP1x32
1 x 32
FOSP1x64
FOSP2x4
FOSP2x8
FOSP2x16
FOSP2x32
1 x 64
2 x 4
2 x 8
2 x 16
2 x 32
40 x 4 x4
or
50 x 5 x 4
50 x 5 x 4
60 x 7 x 4
50 x 5 x 4
or
55 x 7 x 4
70 x 22 x 8
40 x 4 x 4
55 x 7 x 4
Return Loss
≥ 55dB
Directivity
≥ 55dB
Operating
Wavelength
1.26 ~ 1.60 ㎛
Temperature
-40 ~ 80℃
2x8
2x16
2x32
③ Connector Type
④ Polishing type
N : None
SP : PC or SPC (RL ≥40dB) for SM
LC : LC Simplex
DLC : LC Duplex
UP : UPC (RL ≥55dB) for SM
SC : SC Simplex
DSC : SC Duplex
AP : APC (RL ≥60dB) for SM
ST : ST Simplex
FC : FC Simplex
MU : MU Simplex
Input 250 ㎛ dia. and output/ribbon fiber normal length :
Pigtails
1m or customer specified (un-connectorized or connectorized)
52
LS FTTH Solutions
LS FTTH Solutions
53
Connectivity
Fiber Optic Splice Closure
Aerial/Manhole/Mounted Closure
Dome Type Closure
Descriptions
Descriptions
LS Cable Fiber Optic Closures are designed for efficient and scalable operation. It is meant to be infrastructure solutions for FTTH
networks. The closure simplifies FTTH network installation, maintenance and management from central office to the each outside
plants. The Closures provide for connections between fiber optic cables and passive optical splitters in the outside plant. The
closure protects fiber optic splicing point and can be mounted to support aerial applications.
The special feature of FOSC-S-XX-YY-B/C is easy installation applying handle-locking structure which is non-bolt system to closure
assembly. One-body structure supports easy and fast aerial installation. The cone type gasket allows to adjust the its diameter and
completely protect water.
FOSC-T series is designed to terminate, splice and interconnect fiber optic cables in an outdoor environment. This enclosure
accommodates FTTH applications by mounting to the exterior surface of a dwelling and connecting between the feeder cable
and distribution cable to individual living units.
•Fiber Optic Splice Closures FOSC-D are designed for operational efficiency and
scalability for FTTx infrastructure network solutions. The closure simplifies FTTx
network installation, maintenance and management from central office to the each
outside plants.
•FOSC-D provides connections between fiber optic cables and passive optical splitters
in the outside plant. The closure protects fiber optic splicing point and can be
mounted to support aerial and duct applications. FOSC-D have high mechanical
strength against any environmental conditions and allows rapid network
installation.
FOSC-D Series
Features
FOSC-S-XX-YY-B/C series
FOSC-S-3.3-72-A
FOSC-T-3.3-144-A
Features
•Simple and clearly arranged cable management.
•Engineered fiber routing protects bend radius throughout the unit to ensure signal integrity.
•Enough work space and efficient splicing.
•Double-layered sleeve guide
•Qualified to GR-771-CORE for FOSC-S series
•Maximum 16 sc connecter can be mounted for FOSC-S series
•Easy installation, specially for FOSC-S-XX-YY-B/C by applying handle-locking structure
•Accommodate any size of cable diameter
•Compact Design and High Strength
•Connector mounting available
•Environmental conservation structure and material
Specification
Specification
Part Number
Dimension(LxWxH)
Weight(kg)
Max. Capacity
No. of Splice Tray
FOSC-T-3.3-144-A
Dimension (H*R)
430 x 190 x 100
430 x 190 x 135
430 x 170 x 110
375 x 340 x 145
Weight
3.5kg
7.0kg
3.0
4.2
3.0
8.5
Entrance
Single : 5 Oval : 1
Single : 6 Oval : 1
72C(144C)
192C(384C)
72C
144C
3
8
3
6
Suitable cable dia.
Single : less than ø20mm
Oval : ø8-28mm
Single : less than 26mm
Oval : less than 52mm
Splice capacity per tray
Cable port(In/Out)
Cable Diameter(In/Out)
No. of optical adaptor
Max. No. of Splice tray
3/3
Capacity of tray
8-26mm
8-22mm
Max. Capacity
144
16 sc type
-
Splice method
Fusion
Mount to exterior
surface
Cable Blocking
Heat Shrinkable Tube
Material
24C(48C)
3/3(Standard Sheath Gasket)
Installation Type
Aerial / Manhole
LS FTTH Solutions
FOSC-D-6.1-288-A
710mm xø210mm
FOSC-S-3.3-72-A
54
FOSC-D-5.1-144-A
560mm xø175mm
FOSC-S-3.3-192-C
Part Number
FOSC-S-3.3-72-B
6
12
Max : 24 cores
288
PP, ABS
LS FTTH Solutions
55
Connectivity
Connectivity
Optical Distribution Frame (ODF)
Optical Termination Box
Descriptions
Descriptions
•LS ODFs (Optical Distribution Frame) provide efficient
cable connections between outside plant cable and
equipment in the buildings and communication
facilities, ODF integrates fiber splicing, storage and
cable connections together in single unit. The frontal
access and the unique adaptor arrangement design
will increase your work speed and maintenance
efficiency.
•LS Cable Optical Termination Box is mounted to outside or
inside wall of building to distribute and connect optical cable for
distribution of subscriber. It is designed with controls that
maintain the fiber bend radius throughout the unit on the
segregated customer and provider sides. For convenient cable
management, they provide termination, splicing and storage
functions for fiber optic cable systems.
FODF-R-S-SC-12
FODF-R-F-FC-24
FODF-R-D-SC-96
FODF-R-S-SC-144
Descriptions
•Simple and clearly arranged cable management.
•Engineered fiber routing protects bend radius throughout the unit to ensure signal integrity.
•Enough work space and efficient splicing.
•Splice tray has 4 way of in/outlet for easy installation.
Specification
Specification
FODF-R-S-SC-12
Type
Dimension
(WxDxH, mm)
483x310x44
Fiber capacity
Unit
Cable port
Swing
FODF-R-F-FC-24
FODF-R-D-SC-96
FODF-R-S-SC-144
FOTB-E-N-96-A
FOTB-I-N-24-A
FOTB-E-N-24-A
530 x 410 x 170
525 x 600 x 225
250 x 240 x 65
370 x 270 x 100
Capacity
96
96
24
24
No. of Splice Tray
4
4
1
1
144 fibers
Splice capacity per tray
24
24
24
24
5U
4U
Cable port(In/Out)
3
2
Cable Diameter(In/Out)
ø8~32
ø8~32
ø8~32
Splice Method
1
4
2
Color
Ivory
Grey
Ivory
Ivory
Material
Steel
Aluminum
Steel
Aluminum
Installation Type
Fixed
PPart Number
Swing
Dimension(mm)
483x310x133
435x310x220
435x310x176
12 fibers
24 fibers
96 fibers
1U
3U
1
2
ø8~32
1
Cable diameter
Number of splice tray
Splice tray capacity
Adaptor type
SC/FC
FC
SC
SC
Splice method
Fusion
Fusion
Fusion
Fusion
LS FTTH Solutions
Draw
56
FOTB-E-N-24-A
Features
•Durable and rust free housings
•Efficient distribution capacity per unit space
•Easy identification, distribution and connection
•Low loss variation while operation
•All steel constructions except splice tray that is plastic
FOTB-E-N-96-A
•Outdoor installation.
•Wall / Pole Mountable Type.
•Distribution point for subscriber.
•FTTH.
•Data communications.
•Indoor installation.
•Rack Mountable Type.
•FTTH.
•Data communications.
Part Number
FOTB-I-N-24-A
Application
Application
FOTB-I-N-96-A
12fiber/tray
24fiber/tray
FOTB-I-N-96-A
3/12
12/5
2/2
2/2
8-22mm / 3-6mm
Max.8mm
8-22mm
8-22mm
Fusion
Wall / Pole
LS FTTH Solutions
57
Connectivity
Connectivity
Fiber Optic Outlet
Fiber Distribution Rack
Cabinet Rack
Descriptions
Description & Application
•LS Cable Fiber Optic Outlet FOOL-SCX-N-X is mounted to
inside wall of building to distribute and connect optical cable
for distribution of subscriber. FOOL-SCX-N-X is designed with
controls that maintain the fiber bend radius throughout the
unit on the segregated customer and provider sides. For
convenient cable management, they support termination,
splicing and storage functions for fiber optic cable systems.
The outlet has a simple design and enough work space to
arrange clearly for cable management, and engineered fiber
routing protect bend radius through the unit to ensure signal
integrity.
All standard 19" cabinets generally conform to (IEC297-Part1,2,3), (EIA RS-310-C), (DIN 41494
100) 19" standard. LS SimpleTM Cabinet Rack provides unsurpassed strength, stability and
durability for supporting FDF, patch panels, high-density blocks, cabling and other
telecommunication equipment.
•ULight Weight
Material : 6063-T5 Aluminum Construction - 5.0T safety glass front door / slide latch type
side door / 1.2T
steel rear door / side, rear cable bracket / ground bar / caster and level foot
•UFinish : Ivory Powder Coat
FOOL-SC2-N-A
FOOL-SC2-R1-A
Dimension
Application
•Outdoor installation.
•Wall / Pole Mountable Type.
•Distribution point for subscriber.
•FTTH.
•Data communications.
FOOL-SC2-N-B
FOOL-SC8-N-A
No.
Dimension (H x D x W)
Part Number
H
U
D
W"
1
1,000
18
750
600 (19")
LS-CR-1000
2
1,200
22
750
600 (19")
LS-CR-1200
3
1,400
27
750
600 (19")
LS-CR-1400
4
1,600
31
750
600 (19")
LS-CR-1600
5
1,800
36
750
600 (19")
LS-CR-1800
6
2,000
40
750
600 (19")
LS-CR-2000
7
2,200
45
750
600 (19")
LS-CR-2200
Configuration
Specification
Part Number
Interface
FOOL-SC2-N-A
FOOL-SC2-N-B
FOOL-SC8-N-A
Material
Plastic
Color
White / Grey
Dimension(L x W x D)
93mmx185mmx28mm
Capacity
2 FO
Splicing
90mmx150mmx25mm
FOOL-SC2-R1-A
Top View
135mmx170mmx45mm
8 FO
120mm x 70mm x 16mm
2 FO / 1 Copper
Fusion splice
/ Field Assembly Connector
Fusion splice
/Field Installable Connector
Performance
Surplus Fiber Storage
Radius bending: ≥30 mm
Radius bending: ≥15 mm
(G.657 fiber applied)
Adaptor Capacity
2 SC
8 SC
Cable Entry
2
1
Applied Cable dia.
Installation Type
Circumstance
Operating Temperature
58
Application
LS FTTH Solutions
2 SC adaptor
2
2(Rear and Bottom)
3 ~ 6 mm
Wall-flat type
-20 ~ +50°C
Indoor
Indoor use
Front (Inner) View
Front View
Side View
Rear View
LS FTTH Solutions
59
Connectivity
Fiber Distribution Rack
Open Rack
Rack Management
Description & Application
All standard 19", 23" rack generally conform to (IEC297-Part1,2,3), (EIA RS-310-C), (DIN 41494
100) 19" standard. LS SimpleTM Open Rack provides unsurpassed strength, stability and
durability for supporting FDF, patch panels, high-density blocks, cabling and other
telecommunication equipment. Available various accessories.
•ULight weight
Material : 6063-T5 Aluminum Construction. All 2 post vertical frames / 3.0T insulated plate /
ground bar / rear cable bracket
•UOptions
Rack Support(Min. 600 ~ Max.1200 mm)
Plinths (H200, 250, 300mm)
Vertical Cable Management
Cable Bracket and Panels
•UFinish : Black Powder Coat
19", 1U (2Hole, 4Hole)
Improve Cable Routing
Front Filler Plate (1, 2, 3, 4, 5, 6U)
Rear Cable Bracket
Rear Cable Arrangement
19。ア Rack Type
Fixed 110 Block, 25 & 50P and
Jumper Trough (1U)
19" Rack Type
Fixed 110 Block, 100P
Jumper Trough (2U, 4U, 6U)
Surge Protector BRT
19", 23" Rack Type
Ringrun Panel
19", 23" Rack Type
Improve Cable Routing (1U, 2U)
19" Wire Cable Bracket
19" Rack Type 1U
Improve Cable Routing
23" 110 Block Wire Bracket
Fixed 110 Block 300P
(Leg Type)
Shelf
19" Rack Type (D300mm)
Ground Bar (100mm)
Grounding, Included Insulator
Cable Duct
Vertical Cable Routing
Rack Supporter
Open Rack Supporter
Min. 600 ~ Max. 1200 mm
Plinth
Open Rack Plinth
(H200, 250, 300 mm)
Power Strip
15A, 110/220V
Dimensions
No.
Dimension (H x D x W)
Description
H
U
D
W”
Part Number
1
Open Rack 19"
1,800
36
360
600 (19")
LS-OR-19-1800
2
Open Rack 19"
2,000
40
360
600 (19")
LS-OR-19-2000
3
Open Rack 19"
2,200
46
360
600 (19")
LS-OR-19-2200
4
Open Rack 23"
1,800
36
360
700 (23")
LS-OR-23-1800
5
Open Rack 23"
2,000
40
360
700 (23")
LS-OR-23-2000
6
Open Rack 23"
2,200
46
360
700 (23")
LS-OR-23-2200
7
Vertical Rack
1,800
-
160
150
LS-VR-1800
8
Vertical Rack
2,000
-
160
150
LS-VR-2000
9
Vertical Rack
2,200
-
160
150
LS-VR-2200
Configuration
200
100
W
A60635-T5 t=7.0
H
Open-Rack
A60635-T5 t=4.0
300
A60635-T5 t=7.0
Open-Rack
60
LS FTTH Solutions
LS FTTH Solutions
61
Connectivity
Connectivity
Ez-SC, Field Installable Optical Connector
Ez-SC Assembly Procedure
Descriptions
•Easy installation in the field without adhesive & polishing
•Compatible with conventional SC connector
•Performance exceeds ANSI/TIA/EIA-568-A
•Telcordia GR-1081-CORE
1. Boot insert in cable as above
picture
2. Stripping coating around 20mm
3. Inserting cord after cleaning alcohol and fiber cutting(10mm) using tool
Key Features
•Easy operation & Quick assembly
•Connector & fiber re-use available
•Neither adhesive nor polishing necessary
•Additional tool does not necessary
•Can be installed to 0.25mm, 0.9mm and 3.0mm cord
EZ-SC(UPC/APC)
4. Inserting connector to Assembly tool
5. Inserting cable(fiber) until bending
occurs (important)
Specification
Item
PCA
PC 50
≤ Max. 0.5dB
≤Max. 0.5dB
≤ Max. 0.5dB
≥ 45
≥ 50
≥ 60
Insertion Loss
(against master plug)
Return Loss
Cable retention
Application cable diameter
≥10N
0.25mm fiber, 0.9mm tight buffer,
3.0mm cord or cable, 2.0mm Flat type cable
IEC61754-4
GR-1081-CORE
Standard
Operation Temperature
APC 60 NOTE 1)
7-1. Connect Ez-SC to patch cord and beaming light (SUCCESS)
6. Push push-holder toward front
-40℃ ~ 70℃
7-2. Connect Ez-SC to patch cord and beaming light (FAILUER)
* Note 1) 3.5° Cleaving Modify
Specification Sheet
FOFC-①-②-③
① Connector Type
SC : SC connector
LC : LC connector
62
LS FTTH Solutions
② Polishing type
PC : PC type
A5 : APC type (Return
loss ≥ 50)
A6 : APC type (Return
loss ≥ 60)
③ Cable outer Diameter
025 : Fiber
090 : 900㎛ Tight buffer
200 : 2.0mm Flat
300 : 3.0mm cord
8. Inserting boot
9. Inserting housing
10. Connection completed
LS FTTH Solutions
63
Connectivity
Optical Patch Cords & Adaptor
SC type Patch Cord & Adaptor
Performance requirements for Optical Patch Cord
•The most popular connector with 0.25mm diameter ferrule
•Used in a wide range of application
•Push-on design makes easy to connect or dis-connect
•RoHS compliant
Connector type
Fiber Type
SM (1310/1550nm)
Polishing Type
Insertion Loss
SC, ST, FC
SPC
Return Loss Polishing Type
Insertion Loss
LC, MU
MM (850/1310nm)
UPC
≥ 40 dB APC
PC
≤ 0.3 dB
≤ 0.4 dB
≥ 55 dB ≥ 25 dB
SPC
≥ 60 dB UP
PC
≤ 0.3 dB
Return Loss
Polishing Type
SPC
Insertion Loss
≤ 0.75 dB
≤ 0.75 dB
Return Loss
≥ 40 dB
≥ 25 dB
MT-RJ
≥ 40 dB
≥ 55 dB
≤ 0.4 dB
≥ 25 dB
PC
Note : SPC(Super Physical Contact), UPC(Ultra Physical Contact), APC(Angled Physical Contact)
LC type Patch Cord & Adaptor
Part Number Information
Adapter
•Small form factor (SFF) connector with 1.25mm diameter ferrule
•Used in a wide range of application
•Simple push-on design same as RJ45 connector
•RoHS compliant
FC type Patch Cord & Adaptor
FOAD-①-②-③
① Adapter/Connector Type
LC : LC Simplex DLC : LC Duplex
SC : SC Simplex DSC : SC Duplex
ST : ST Simplex FC : FC Adapter
MU : MU Simplex MTRJ : MTRJ Adapter
BICON : Biconic Adapter
PIG: Open (pigtail)
⑤ Fiber Type
•Screw-coupled connector
•Unsed in a wide range of application
•RoHS compliant
64
LS FTTH Solutions
SC : Conventional Single Mode Fiber (G.652B)
SE : Enhanced Single Mode Fiber (G.652D)
BE : Bend Insensitive Fiber (G.657)
MC 50MMF Conventional
MG : 50MMF Giga Grade (OM2)
MX : 50MMF 10 Giga Grade (OM3)
HC : 62.5MMF Conventional (OM1)
HG : 62.5MMF 1 Giga Grade
Patchcord
FOPC-① ④-①④-⑤⑥⑦-⑧
② Sleeve Material
PB : Phosphor Bronze
ZC : Zirconia Ceramic
OO : No Alignment Sleeve
④ Polishing Type
PC : PC for MM
SP : SPC for SM
UP : UPC for SM
AP : APC for SM
③ Housing Material
P : Plastic Housing
M : Metal Housing
⑥ Cable Type
S : Simplex Cord
Z : Duplex Zipcord
⑥ Jacket Material
V : PVC
Z : LSZH
⑦ Cable Outer Diameter
09 : 0.9mm Tight Buffer
16 : 1.6mm Sheath Cable
18 : 1.8mm Sheath Cable 20 : 2.0mm Sheath Cable
24 : 2.4mm Sheath Cable
30 : 3.0mm Sheath Cable
⑥ Jacket Material
V : PVC
Z : LSZH
LS FTTH Solutions
65
LS FTTH Activities
LS Cable is a proud vendor member of the Full Service Access Network Group, FSAN which is an interest group for
the world's leading telecommunications services providers, independent test labs, and equipment suppliers to work
towards a common goal of truly broadband fiber access networks. The Mission of FSAN is to drive applicable
standards, where they already exist, into the services and products in the industry, while simultaneously advancing its
own specifications into the appropriate standard bodies to provide further definition to the Full Service Access
Network. FSAN has more than 50 members representing the leading implementers of Gigabit rate G-PON and
B-PON Passive Optical Networking. LS Cable has been actively testing Interoperability and Assessing the
Implementation of ITU G.984 Standards, and also participating to establish Standards for FSAN members.
FTTH Leading
Solution Provider
As a proud foundation member of FTTH council Asia Pacific, LS Cable has been enthusiastic board member
representing all areas of broadband industries, including telecommunications, computing, networking, system
integration, engineering and content-provider companies, as well as traditional telecommunications service
providers, utilities and municipalities. Our aim is to educate, promote and accelerate FTTH and resulting economic
and quality of life enhancements.
ASIA PACIFIC
Vendor Member
Foundation Member
Test Interoperability and Assess the
BoD Member
Implementation of ITU G.984 Standards
Regional Committee Technical Committee
Participates establishing FSAN Committee
Market Development Committee
Standards
66
LS FTTH Solutions
LS FTTH Solutions
67
Products & Systems of LS Cable
Power Transmission & Distribution System
Telecommunication System
Extra High Voltage Cable System
Overhead Transmission Line System
OPGW I Busduct System
Onshore & Offshore Cable System
Medium & Low Voltage Cable
Control & Instrumentation Cable
Optical Fiber
Optical Fiber Cable
RF Feeder Cable
LAN Cable
FTTH
HFC (Hybrid Fiber Coaxial Cable)
Global Network
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement