"Professional Series – Red label" : Super tower or Super
mid-tower cases with elegant, clean line designs.
"Aluminum – Silver label" : Unique “Full aluminum” cases
targeting at power users, professionals and gamers.
"Ultimate Gaming Series – Black label" : Ultimate gaming
cases targeting at the extreme gamers. This Series offers
gamers with most functions, expandability and Extreme
"Compact – Blue Label" : Small form factor case series
including cube cases, mini-ITX and Mini-Tower
PGS Introduction
"Value Series" : Best VALUE gaming cases with the
highest C/P Ratio (Cost to Performance ratio).
Qs-200 is one of the best “Mini-Tower” case in the
market today if not the BEST Mini-tower case. This
compact case is not only elegantly designed and
solidly constructed; it also provides high versatility,
expandability, transportability, protection and
The Qs-200 is designed with “User-Friendly” concept
in mind and it also gives gamers high versatility and
protection for their Hard Drives. Its “Screw-less”
chassis, pre-installed cable management clips
and removable HDD bracket made this chassis
an easy install. The chassis can support
2 x 3 1/2” HDDs or 3 x 2 1/2” HDDs.
These Hard Drives are also well protected from shock
with the “anti-vibration” rubbers.
The Qs-200 case also delivers optimal air flow and
supports Longer High-End VGA cards up to 340mm.
It is the only Mini-tower case in the market which
can support 5 x 12cm fans (2 x12cm fans in front,
1 x 12cm fan in the rear and 2 x 12cm fan on the
side panel). Its “Mesh” front panel also helps to
maximize air-intake.
Design Concept
Aerocool is proud to announce our first compact case
(Model : Qs-200) under the PGS-Q series (Compact
series – Blue Label).
Photos are for exterior
reference only. Not all fans
are inclusive.
Please see specification
- Solidly constructed chassis - 0.6mm SECC Japanese
- High-end Graphic card Support - Supports
longer high-end VGA cards up to 340mm
- High versatility - Supports 2 x 3 1/2" HDDs or
3 x 2 1/2" HDDs
- HDD Protection - Includes anti-vibration rubber to
protect your HDDs from shock.
- Ease of Installation - The combination of
Screw-less 5 1/4” bays, 3 1/2” bay and PCI Slot PLUS
a Removable HDD plate make this chassis an easy
- Easy Access front I/O ports - 3 x USBs,
Audio/Mic and E-Sata ports
- Smart Cable Management - “cable management
clips” are pre-installed inside the chassis to minimize
your cable mess and improve the system airflow
- Dust Protection - Includes front "Dust Filter" to prevent
dust entering your computer
- High performance "Mini -Tower" for gamers and
Case Type
Chassis Dimensions
Drive Bays
Expansion Slots
Max length space available for PCI slots
I / O Ports
Cooling System
Rated voltage
Starting voltage
Power consumption
Rated current
Air Flow (CFM)
Air pressure
Noise (dBA)
Mini Tower
SECC 0.6mm
Mini - ITX / Micro ATX
367(H) x 185(W) x 395(D)
2 x 5.25" (External) / 1 x 3.5" (External) / 2x3.5” HDDs or 3x2.5” HDDs
4 Slots
340 mm
3 x USB2.0 / 1 x E-SATA / Mic & headphone (AC97 & HD audio)
120 x 120 x 25mm
≤ 9V(Power ON/OFF)
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
120 x 120 x 25mm
≤ 9V(Power ON/OFF)
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
5 x 12cm fans !!!
1. Front - 2 x 12cm fan (1 x 12cm Blue LED fan included)
2. Back - 1 x 12cm fan (1 x 12cm Blue LED fan included)
3. Side - 2 x 12cm fan (optional)
Air Flow
Superb Airflow - install up to
Tool-free for 5.25” bays
Sufficient depth for hi-end
VGA cards up to 340mm
Tool-Free for PCI slots
Removable HDD rack can be
laid flat for ease of installation
Cable clips to reduce
cable mess
Can install up to 2x12cm
HDD installation option 3:
2.5” x 2 or 2.5” x 3
HDD installation option 2: HDD installation option 1:
3.5” x 1 and 2.5” x 1
3.5” x 2
Design Concept