Ciel EaM micro duo bat detector Manual

Below you will find brief information for bat detector micro duo. The micro duo bat detector is a handheld device that allows you to detect and record bat calls. It features both heterodyne and frequency division detector modes, enabling you to identify and analyze bat calls. The device features a built-in microphone, speaker, and memory for recording calls. It can be used to identify bat species, monitor bat populations, and conduct research on bat ecology.

PDF Download
Document
Bat Detector Micro duo Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Heterodyne and frequency division detector modes
  • Built-in microphone and speaker
  • Memory for recording calls
  • Adjustable frequency and volume
  • Red LED display
  • Lightweight and portable
  • Easy to use

Frequently asked questions

Press the On/Off button for less than 3 seconds to switch between heterodyne (HD), frequency division (FD) modes.

Use the + and - buttons to set the volume to the desired level. The setting applies to all modes.

The recording length is approximately 3 seconds.

Hold the Rec button for 3 seconds or longer to delete a recording.

The detector uses a 9-volt battery.

The detector is fully functional until the battery reaches 6.7 volts for HD mode and 7.2 volts in FD mode.
Preparing document for printing…
0%