Catalogue 2016

Catalogue 2016
Catalogue
2016
Ver.04.12.15
COMPANY
Leb electronics was established in 1999 after a long experience gained in the electronics sector. The company
specializes in development, designing and production of electronic devices destined mainly to the gate
automation industry.
Leb electronics is now a very important supplier of electronic equipment for many Italian companies,
distinguishing itself for innovation and reliability of its products.
Thanks to its staff of mechanics professionals, it has been possible the designing and development of
electro-mechanical operators, which contain innovative technical solutions that makes possible easy
installations and reliability of operations. Since 2005, Leb electronics can offer a complete range of
residential operators able to satisfy most of the demand of the market.
2
Our products are projected
and designed within our
Italian factory.
Before being launched and
distributed, all products have
to undergo heavy and long
tests in our own test fields.
Operators and electronics must withstand the worst conditions of weather and cycle duty. They are tested
until they are completely worn out, to check endurance.
We have also indoor test field, for testing our overhead operators.
A large stock of articles allows to process orders of customers
quickly
Currently the company employs young
and specialized staff, with a complete
and specific knowledge in their
operational field. The distribution network
is organized with Italian retailers,
importers and distributors in the most
important countries.
Leb electronics provides a pre and postsale technical support. Importers can
benefit of technical trainings organized in
Italy or, in case, at their premises.
3
The Company Mission is to produce and supply its customers with products containing state-of-the-art
electronics matched with modern, strong and reliable electro-mechanical operator, and, at the same
time, to keep an excellent quality/price ratio. User-friendly products on every aspect: quality, installation,
reliability, service and price.
The excellent features of its products have
allowed Leb electronics to become important
supplier of Companies distributing in the DIY
market with a dedicated line. Every year more
and more customers start to work with Leb
electronics with mutual satisfaction.
4
GENERAL INDEX
INDEX
Sliding Gate Control Boards
Swing Gate Control Boards
Universal Control Boards
Control Board 380 Vac Sliding Gate
Control Boards 230 Vac Tubular/Roll. Shutter
Page 6
Page 6
Page 7
Page 8
Page 8
Remote controls and Secret Key programmer
Page 9
Radio Receivers
Page 10
Accessories and security devices
Page 11
Sliding Gate Operators BOOST
Page 14
Swing Gate Operators DARTY
Page 16
Swing Gate Operators ARROW
Page 18
Articulated Swing Gate Operators TWIST
Page 20
Swing gate Underground Operators STONE
Page 22
Traffic Barrier SHUT
Page 24
Sectional Door Operators SPEEDY
Page 26
Table of Features of Control Boards
Table of Compatibility Receiver/Transmitters
Where We Are
Sales Conditions
Page 28
Page 30
Page 33
Page 34
5
SLIDING GATE
Control Boards 230 Vac
CTR18 – 230 Vac – 1 sliding gate motor or up-and-over garage door




Box SCT6 included
32 VA electric transformer
Closure after crossing photocells
Working times adjustable by trimmer
Plug-in radio receiver can be connected by Molex
Card suitable for working in very cold weather conditions
CTR31 – 230 Vac – 1 sliding gate motor or up-and-over garage door
Rx on board – Box STC6 included





Slow-down function
Working times adjustable digitally
Pedestrian opening and courtesy light also by remote control
Separated inputs for Opening and Closing
Far Storing Feature
SWING GATE
Control Boards 230 Vac
CTR17 – 230 Vac - 2 swing gate motors




Box SCT6 included
32 VA electric transformer
Electro-lock control
Working times adjustable by trimmer
Plug-in radio receiver can be joined by Molex
Card suitable for working in very cold weather conditions
CTR32 – 230 Vac - 2 swing gate motors






Slow-down function
Working times adjustable digitally
Pedestrian opening and courtesy light also by remote control
Open gate indicator light
Electro-lock control
Far Storing Feature
Rx on board – Box SCT6 included
For a complete list of control boards features, please refer to pages 28 and 29
6
UNIVERSAL
Control Boards 230 Vac
CTR19 – 230 Vac – Universal (Swing and Sliding gate, Garage door)




Box SCT6 included
32 VA electric transformer
Controlling up to 2 leaves with 4 electric limit switches
Working times adjustable by trimmer
Plug-in radio receiver can be joined by Molex
Card suitable for working in very cold weather conditions
For a complete list of control boards features, please refer to pages 28 and 29
UNIVERSAL
Control Board 12/24 Vdc
CTR50 – 12/24 Vdc – Universal (Swing and Sliding gate, Garage door)



Rx on board - Box SCT6 and
Transformer 100 VA included



Slow-down function
Working times adjustable digitally
Automatic programming procedure (just 1 push)
Obstacle detection by amperometric reading
Controlling up to 2 leaves with 4 electric limit switches
Far Storing Feature
CTR50/PW24 – 24 Vdc – Universal (Swing and Sliding gate, Garage door)


Same features as CTR50 above, but equipped with transformer 170
VA and supplied in a dedicated box (SCT8)
Working only at 24 Vdc
Rx on board - Box SCT8 and
Transformer 170 VA included
CTR50/PW12 – 12 Vdc – Universal (Swing and Sliding gate, Garage door)


Same features as CTR50 above, but equipped with transformer 170
VA and supplied in a dedicated box (SCT8)
Working only at 12 Vdc
Rx on board – Box SCT8 and
Transformer 170 VA included
For a complete list of control boards features, please refer to pages 28 and 29
7
SLIDING GATE
Control Board 380 Vac
AT380/D ( AT380 + CTR18 ) – 380 Vac sliding gate




For managing 1 motor three-phase 380 Vac
Working times adjustable by trimmer
Closure after crossing photocells
Adjustable over-current device (motor protection)
Boxes included SCT4 for CTR18
For a complete list of control boards features, please refer to page 28 and 29
Control Boards 230 Vac
TUBULAR/ROLLING SHUTTER
CTR29 – 230 Vac – For Tubular motor

Rx on board - Box SCT5 included



Working times adjustable digitally
Separated inputs for Opening and Closing
Possibility to operate in dead man’s control mode
Far Storing Feature
CTR30 – 230 Vac – For Rolling Shutter motor


Rx on board - Box SCT5 included




Working times adjustable digitally
Separated inputs for Opening and Closing
Blinker and courtesy light outputs
Safety device input
Plug-in torque adjustment card can be joined by Molex
Far Storing Feature
LIGHT CONTROL
Control Boards 230 Vac
CTR29L – 230 Vac – For Light control





2-Channel light control
Timer or bistable operation mode
1 KW for each channel loading capacity
Far Storing Feature
Box SCT5 included
For a complete list of control boards features, please refer to pages 28 and 29
8
ROLLING CODE & FIXED CODE
Remote controls
SMARTY - Rolling code or fixed code/cloner







Serialized code with 4,2 million combinations (rolling code)
Switchable into fixed code
Fixed code copying function up to 80 bit
Each pushbutton fixed or rolling code independently
Programmable also through PS01 inductive mode (433 Mhz)
4 Channels
Batteries lithium cell CR2016 x 2 long life
SMARTY433 – 433,92 MHz
SMARTY868 – 868,35 MHz
ROLLING CODE
ROLLY – Rolling code




Serialized code with 4,2 million combinations
Operating frequency 433,92 MHz
4 Channels
Batteries lithium cell CR2016 x 2 long life
FIXED CODE
FIXY – Fixed code programmable by mini dip-switch




1024 code combinations
Operating frequency 433.92 MHz
4 Channels
Batteries lithium cell CR2016 x 2 long life
SECRET KEY PROGRAMMER
PS01 – Programmer for SMARTY/RSK4N (Secret Key System)




Manages remotes and locks a specific RSK4N receiver
Wireless Bluetooth connection with RSK4N receiver
Manages also standard rolling code installation
LebManager SW for PC included
For Rx/Tx compatibility list please refer to page 30
9
FIXED CODE (Rolling compatible)
Radio Receivers
Plug-in radio receiver




2 Channels (100 codes)
2 operation modes (monostable and bistable)
Far Storing Feature
Compatible with all Leb’s remote controls
RWAU2 - 433,92 MHz
RPAU2 - 868,35 MHz
Radio receiver with terminal board




2 Channels (100 codes)
2 operation modes (monostable and bistable)
Far Storing Feature
Compatible with all Leb’s remote controls
RKAU2 - 433,92 MHz
RPAU2K - 868,35 MHz
Stand-alone radio receiver




2 Channels (100 codes)
2 operation modes (monostable and bistable)
Far Storing Feature
Compatible with all Leb’s remote controls
RWAU2SA - 433,92 MHz
RPAU2SA - 868,35 MHz
ROLLING CODE
Radio Receivers
Stand-alone Rolling code receiver




4 Channels, up to1000 storable codes
Far Storing Feature
Wiegand interface for access control
Compatible with SMARTY433, ROLLY, TRP1 and RTA2
RSK4N - 433,92 MHz
RPSK4N - 868,35 MHz
MEM256– Back-up memory card (included in Rx)
BT01 – Bluetooth module for PS01 wireless connection
For Rx/Tx compatibility list please refer to page 30
10
Accessories
Wireless keyboard





Operation with fixed or rolling code (selectable)
Secret Key System Ready
Night light and acoustic beep
Protection degree IP64
Lithium cell CR2032 x 2 long life
RTA2 – 433,92 MHz
RTA8 – 868,35 MHz
SELE2 – Outdoor Key selector



Base in aluminium
Provided with 2 keys (European standard)
Double control (5 A capacity load)
TRP1 – Radio Transponder Rolling Code 433,92 MHz




12 Vdc/24 Vac power supply
4 selectable channels
5 transponder keys included
Protection degree IP54
TRC1 – Transponder key
FTE – Outdoor photocells 12 Vdc/24 Vac





15 m range
Modulated infrared rays device
Provided with focalizing lens
Low current consumption
Protection degree IP54
CLE – Aluminium column for accessories
CLE5 50 cm high
CLE10 100 cm high
Price for each piece
11
Accessories
ANSE – Tuned antenna 433,92/868,36 MHz


Helicoidal antenna for improved reception
Supplied with 4 m coaxial cable RG58
LP – Blinker with LED bulb
LP 24LED - 24 Vac
LP 230LED - 230 Vac
BSK1 – Reversible electro Lock with built-in Receiver 433,92 MHz



Receiver compatible with all Leb remotes, RTA2, TRP1
2 SMARTY433 remotes included
Far storing Feature (no need to open electro lock to
store new remotes)
LMP20WB – Solar Panel 12-24 Vdc
 Current control (battery protection)
 20 W power
 Equipped with 2 fixing brackets
Voltage regulator included 12/24 Vdc
LM240K/CB – Battery Kit for solar panel


2 Batteries 12V / 12Ah included
Cables and box SCT8 included
REG – Torque adjustment card
Optional module card for CTR17, CTR18, CTR19, CTR30
12
Accessories
LED bulb for blinker
BLD24 – LED bulb 24 Vdc/Vac 1,5 W
BLD230 – LED bulb 230 Vac 1,5 W
Receiver module
RSAW - 433,92 MHz
RSAW/868 - 868,35 MHz
Toroidal transformer for low voltage control boards
TRF11 – 230 Vac/20 Vac - 170 VA
TRF6 – 230 Vac/12- 15-20 Vac – 100 VA
SCT5 - Box for CTR29, CTR29L, CTR30

IP54
Standard with Control Board
ContControloaaarrrddd
SCT4 – Box for CTR57 Control Board and AT380/D


Hinged lid box
IP54
Standard with Control Board
ContControloaaarrrddd
SCT6 – Box for all Control Boards (except CTR50/PW,
AT380/D, CTR29, CTR29L, CTR30)

IP54
Standard with Control Board
SCT8 – Box for CTR50/PW (12 & 24 Vdc)

IP54
Standard with Control Board
ContControloaaarrrddd
13
SLIDING GATE
BOOST Operators
Irreversible operators for sliding gate BOOST











Gearing completely made of solid steel
Fixing base plate included
Die-cast aluminium body powder coated
Electronic limit switches
Screws in stainless steel
Equipped with control board and radio receiver
Start-up power and slow-down function
Electronic adjustment of the torque
Pedestrian opening by remote control
Automatic closing
Separated inputs for Opening and Closing (only version 230 Vac)
Version 24 Vdc
 Battery charger already included
 Possibility to connect solar panel LMP20WB
 Obstacle detection by amperometric sensor
MTC1 – Operator 24 Vdc for gate up to 400 kg – (BOOST4)


Equipped with control board CTR58
Radio receiver on board
MTC2 – Operator 230 Vac for gate up to 500 kg – (BOOST5)


Equipped with control board CTR31 and receiver on board
Ventilated motor for heavy duty
MTC3 – Operator 230 Vac for gate up to 1000 kg – (BOOST10)


Equipped with control board CTR31 and receiver on board
Ventilated motor for heavy duty
Fixing base plate for all operators BOOST


4 mm thickness
Zinc-coated steel
Standard with Boost
14
SLIDING GATE
BOOST Operators
Technical Features
Max leaf weight
kg
MTC1
MTC2
MTC3
400
500
1000
Main power supply
230 Vac - 50/60 Hz
Motor power supply
24 Vdc
230 Vac
230 Vac
Current absorption
A
5
1
1,2
Capacitor
μF
-
6
Thermic protection
°C
-
Motor speed
rpm
1400
Gate speed
m/min
10
Max torque
Nm
24
36
Rack module
M
4
Operating temperature
°C
-20 ÷ +60
Protection degree
IP
Duty cycle
%
55
44
50
40
Limit switch
Operator weight
10
120
40
electronic
kg
9,5
9
9,5
CRM 6 – 1 m bar with 6 fixing brackets



Solid steel core 10 x10 mm inside nylon structure
Nylon rack module 4
Suitable for gate up to 600 kg
CRM 5 – metal rack module 4

1 m bar, 12 x 30 mm with fixing spacers and screws
Kit for sliding gate






BOOST operator equipped with control board (CTR31 or CTR58)
Base plate
1 photocell FTE
2 SMARTY Remotes
ANSE Antenna
Blinker (LP24LED or LP230LED)
KOS2 – BOOST4 (24 Vdc) for gate up to 400 kg
KOS1 – BOOST5 for gate up to 500 kg
KOS3 - BOOST10 for gate up to 1000 kg
15
SWING GATE
DARTY Operators
Irreversible operators for swing gate DARTY



Gearing made of solid steel and bral
Stainless steel shaft and power coated aluminium pipe
Unlocking system with Allen wrench included

Adjustable and non-welding rear and front bracket included
DARTY24 – Operator 24 Vdc for leaf up to 2,5 m
DARTY24
Technical Features
Max leaf length
m
2.5
Max leaf weight
kg
250
Main power supply
230 Vac - 50/60 Hz
Motor power supply
24 Vdc
Current absorption
A
2,5
Max thrust
N
2000
Operating temperature
°C
-20 ÷ +60
Protection degree
IP
44
Duty
%
50
Operator weight
kg
3,5
Kit for swing gate DARTY24






2 DARTY24 operators
Control board CTR57
1 photocell FTE
2 SMARTY Remotes
ANSE Antenna
Blinker LP24LED
KPT8 – DARTY 24 Vdc for leaf up to 2,5 m
16
SWING GATE
Accessories
CTR57 – 24 Vdc – 2 swing gate motors
Rx on board - Box and
Transformer 100 VA included





Slow-down function
Working times adjustable digitally
Automatic programming procedure (just 1 push)
Obstacle detection by amperometric sensor
Far Storing Feature
17
SWING GATE
ARROW Operators
Irreversible operators for swing gate ARROW





Die-cast aluminium body powder coated
Gearing completely made of solid steel and bral
Protected and easy unlocking system with Allen wrench included
Built-in capacitor (230 Vac version)
2 Mechanical stoppers (open and close) included
Adjustable and non-welding rear and front bracket included

AL400DC – ARROW 24 Vdc for leaf up to 3 m
AL400AC – ARROW 230 Vac for leaf up to 3 m
ARROW 24 ARROW 230
Technical Features
Max leaf length
m
3
3
Max leaf weight
kg
250
300
Main power supply
230 Vac -50/60 Hz
Motor power supply
24 Vdc
230 Vac
1
Current absorption
A
3,2
Capacitor
μF
-
6
Thermic protection
°C
-
120
Max thrust
N
2200
Operating temperature
°C
Protection degree
IP
Duty
%
50
30
Operator weight
kg
6
6,5
2500
-20 ÷ +60
44
18
SWING GATE
ARROW Operators
Kit for swing gate ARROW






2 ARROW operators
Control board CTR50 for 24V or CTR32 for 230V
1 photocell FTE
2 Remotes SMARTY
Antenna ANSE
Blinker (LP24SL o LP230SL)
KLO2 – ARROW 24 Vdc for leaf up to 3 m
KLO1 – ARROW 230 Vac for leaf up to 3 m
2 Mechanical stoppers
Standard with ARROW
Accessories
CTR50 – 12/24 Vdc – Universal (Swing and Sliding gate, Garage door)



Rx on board - Box SCT6 and
Transformer 100 VA included



Slow-down function
Working times adjustable digitally
Automatic programming procedure (just 1 push)
Obstacle detection by amperometric reading
Controlling up to 2 leaves with 4 electric limit switches
Far Storing Feature
CTR32 – 230 Vac - 2 swing gate motors
Rx on board – Box SCT6 included






Slow-down function
Working times adjustable digitally
Pedestrian opening and courtesy light also by remote control
Open gate indicator light
Electro-lock control
Far Storing Feature
19
ARTICULATED ARM SWING GATE
TWIST Operators
Irreversible operator 24 Vdc articulated arm TWIST







Gearing completely made of solid steel and bral
Die-cast aluminium base powder coated
Aluminium articulated arm with mechanical stopper
Unlocking system with Allen wrench included
Opening up to 110°
Built-in CTR57 control board with room for back-up batteries
Suitable in case of large and deep pillars
TWIST24CS – TWIST aluminum arm with board CTR57
TWIST24S – TWIST TWIST aluminum arm w/out board
TWIST24
Technical Features
Max leaf length
m
2,5
Max leaf weight
kg
250
Main power supply
230 V 50/60 Hz
Motor power supply
Current absorption
24 Vdc
A
2,5
Max torque
Nm
270
Operating temperature
°C
-20 ÷ +60
Protection degree
IP
44
Duty
%
50
Operator weight
kg
5,5
Kit for swing gate with articulated arm TWIST






2 TWIST operators (Master + Slave)
Control board CTR57
1 photocell FTE
2 Remotes SMARTY
Antenna ANSE
Blinker LP24SL
KAO2S – With aluminium articulated arm and stopper
20
21
UNDERGROUND SWING GATE
GATE
STONE Operators
Irreversible underground swing gate operator STONE







Foundation box and lid made of STAINLESS STEEL
Heavy duty lid and foundation with drainage holes
Gearing completely made of steel and bral
Waterproof motor
2 internal mechanical stoppers on version 110°
2 internal electric limit switches on version 180°
Unlocking system with broached lever
UO24DC/MT – STONE 24 Vdc - Electric motor only
UO230AC/MT – STONE 230 Vac - Electric motor only
Technical Features
Opening
°
STONE
24/110
STONE
230/110
STONE
24/180
STONE
230/180
110
110
180
180
Main power supply
230 Vac - 50/60 Hz
Motor power supply
24 Vdc
24 Vdc
230 Vac
250
200
250
5
1,2
5
1,2
-
8
-
8
°C
-
120
-
120
Max torque
Nm
280
350
280
350
Operating temperature
°C
Protection degree
IP
Duty
%
50
30
Operator weight
kg
Max leaf length
m
Max leaf weight
kg
200
Current absorption
A
Capacitor
μF
Thermic protection
230 Vac
2,5
-20 ÷ +60
67
50
30
15
CAINT/110IN – Foundation box for STONE 110°


Equipped with transmission levers 110°,
mechanical stoppers and unlocking system
All stainless steel with drainage holes
22
UNDERGROUND SWING GATE
GATE
STONE Operators
Unlocking system
Standard with foundation box
Kit underground operator STONE







2 STONE operators
2 STAINLESS STEEL foundation boxes
Control board
1 photocell FTE
2 remotes SMARTY
Antenna ANSE
Blinker (LP24SL o LP230SL)
KU03IN – STONE 24 Vdc opening 110°

With CTR50/PW24 control board
KU04IN – STONE 230 Vac opening 110°

With CTR32 control board
23
TRAFFIC BARRIER
SHUT Barrier
Electromechanical traffic barrier 24 Vdc SHUT














Max boom length m 4,50
Opening time 3 to 6 seconds
Zinc-coated steel body powder coated
Built- in CTR59/SBSC control panel
Electronic limit switch
Amperometric obstacle sensor
Receiver and battery charger included
Room for back-up batteries (2 x 7 Ah suggested)
Soft start and soft stop
Gearing completely made of solid steel and bral
Fixing hub included
Easy unlocking system with key included
Adjustable mechanical stoppers
Far Storing Feature
SHUT24 – Traffic barrier up to 4,5 m


Equipped with CTR59/SBSC, receiver and battery charger
Fixing hub already included (for boom diameter 80 mm)
Needs balancing spring according to boom gate length
SHUT
Technical Features
Max boom arm length
m
Opening time
s
Main power supply
3-6*
230 V 50/60 Hz
Motor power supply
Current absorption
4,5
24 Vdc
A
5
Max torque
Nm
240
Operating temperature
°C
-20 ÷ +60
Protection degree
IP
44
Duty
%
50
Operator weight
kg
50
*Selectable: 3 seconds up to 3 m boom, above 6 seconds
24
TRAFFIC BARRIER
Accessories
Boom arm



Anodized aluminium diameter 80 mm
Thickness 2 mm
2 caps for boom included
ASTA300 - 3 m length
Needs SPR300 spring
ASTA450 - 4,5 m length
Needs SPR450 spring
Rubber and aluminum profile for boom arm
RUBB300 – 3 m length
RUBB450– 4,5 m length
SPR300 – Balancing spring for 3 m arm
For 3 m length boom arm (green colour)
SPR450 – Balancing spring for 4,5 m arm

For 4,5 m length boom arm (yellow colour)
BSPLT – Base plate for SHUT
STKR – Stickers for boom arm

For increasing visibility of boom arm
12 Pieces
FORK – Fork type support


Adjustable height
Anodized aluminium
25
SECTIONAL AND GARAGE DOORS
SPEEDY Operators
Sectional door operator 24 Vdc SPEEDY














Gearing made of bral
Supplied with 3 m guide and pre-assembled chain
Guide made of aluminium pieces 1 m x 3
Equipped with chain stretcher
Provided with 4 brackets for installation
1 remote control SMARTY included
Control board CTR59SC with built-in radio receiver
Toroidal transformer
Easy and automatic programming
2 magnetic limit switches
Soft start and soft stop
Obstacle detection
Courtesy light LED, also by remote control
Far Storing Feature
SPEEDY 60
Technical features
Main power supply
230 V-50/60 Hz
Motor power supply
Current absorption
Max thrust
Max door height
Speed
SPEEDY 80
24 Vdc
A
N
mm
4
600
6,5
800
2250
m/sec.
~ 0,1
Operating temperature
°C
-20 ÷ +60
Duty
%
50
Operator weight
kg
8
9
SPD60 – Kit SPEEDY 24 Vdc sectional door 600N



3 m guide with pre-assembled chain
1 remote control SMARTY included
4 brackets for installation
SPD80 – Kit SPEEDY 24 Vdc sectional door 800N



3 m guide with pre-assembled chain
1 remote control SMARTY included
4 brackets for installation
26
SPEEDY Operators
SECTIONAL AND GARAGE DOORS
KBS1A – Adapter arm for up-and-over garage door
KFC1 - External release wire
GEK01 – 1 m additional guide with chain
27
CTR57 CTR59SC
Section.
CTR32
Swing
CTR17
Swing
CTR58
Swing
CTR31
Slide
CTR18
Slide
Technical Features/Control Boards
Slide
Table of features of control boards
24 Vdc
❷
●
●
●
●
●
24 Vdc
❶
●
●
●
●
V e r. 2 6 .11.15
Motor power supply
Control of 1 or 2 motors
Radio receiver on board (Fix code &/or Rolling)
Possibility to close receiver only to rolling code
Receiver with "Far Storing" feature
Self-learning programming (autom., just one push)
Possibility to operate single leaf (for swing)
Possib. 0 secs delay between leaves (for swing)
Control of electric limit switches
Time programming (mechanical stoppers)
Control of encoder
Obstacle detector (amperometric sensor)
Slow down feature
Pedestrian opening Radio or Manual
Separated inputs for Open and Close controls
Dedicated input emergency Stop
Step by step mode
Dead man's control
Condominium mode
Automatic closing (time)
Closure after crossing the photocell
Torque adjustment
Maximum start-up power
Photostop feature
Microprocessor auto-test on safety inputs
Electric-lock output
Kickback function for electric-lock
Control of blinker (pre-flashing, flashing, etc.)
Courtesy light
Open gate light indicator
Inputs state LED
Display on board
Built-in Battery charger
Opening control by clock
Possibility to program all the operation times
230 Vac 230 Vac
❶
❶
●
●
●
24 Vdc
❶
●
●
●
●
230 Vac 230 Vac
❷
❷
●
●
●
●
●
●
●
●
●
●
●
●
RM
●
●
●
●
●
●
●
●
●
●
R
●
●8
●
●
●
●
M
●
RM
●
●
R
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●4
●
●
●
●
●
●
●
●
●4
●
●
●
●
●
●
●
●
●
●
●
2
Also soft start
Photocells must be excluded
5
Working by dedicated channel
Only in condominium mode
*Univ = Universal, working with both slide and swing gates
●
●
1
3
4
8
●
●8
●
●
●
●1
●
●
●8
●
●
●
●
●
●
●
●
●
●
Excludible
Only during programming
28
Motor power supply
Control of 1 or 2 motors
Radio receiver on board (Fix code &/or Rolling)
Possibility to close receiver only to rolling code
Receiver with "Far Storing" feature
Self-learning programming (autom., just one push)
Possibility to operate single leaf (for swing)
Possib. 0 secs delay between leaves (for swing)
Control of electric limit switches
Time programming (mechanical stoppers)
Control of encoder
Obstacle detector (amperometric sensor)
Slow down feature
Pedestrian opening Radio or Manual
Separated inputs for Open and Close controls
Dedicated input emergency Stop
Step by step mode
Dead man's control
Condominium mode
Automatic closing (time)
Closure after crossing the photocell
Torque adjustment
Maximum start-up power
Photostop feature
Microprocessor auto-test on safety inputs
Electric-lock output
Kickback function for electric-lock
Control of blinker (pre-flashing, flashing, etc.)
Courtesy light
Open gate light indicator
Inputs state LED
Display on board
Built-in Battery charger
Opening control by clock
Possibility to program all the operation times
230 Vac 12/24 V
❷
❷
●
●
●
●
●
●
●
●
● (4)
● (4)
●
●
●
●
●
M
RM
24 Vdc
❶
●
●
●
●
230 Vac 230 Vac 380 Vac
❶
❶
❶
●
●
●
●
●
●
●
●2
●
●
●8
●
●
●
●
●
●
●
●
●
●1
R
●
●
●
CTR30 AT380/D
Slide
CTR29
Rolling
Shutter
V e r. 2 6 .11.15
CTR59/S
BSC
Tubul.
CTR50
Barrier
CTR19
Univ*
Technical Features/Ctrl boards
Univ*
Table of features of control boards
●
●
●8
●
●5
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
3
●
●
●
●
●
●
●
●
●
●
●
●
●
●2
●
●
●
●
29
Table of Compatibility Tx/Rx Leb Electronics
Ver. 26.11.15
Fixed code Rx on CTR Rolling Code Rx on CTR RWAU2, RKAU2, RWAU2SA
ARTICLE
SMARTY
433
FEATURES
433,92 MHz
100 codes storable
FIXED CODE & ROLLING
COMPATIBLE*
ROLLING CODE
ONLY
FIXED CODE & ROLLING
COMPATIBLE*
ROLLING CODE ONLY
OK
OK
OK
OK
(to be
selected)
OK
NO
OK
NO
Rolling
Code
OK
OK
OK
OK
Fixed Code
OK
NO
OK
NO
OK
OK
OK
OK
(to be
selected)
OK
NO
OK
NO
Rolling
Code
OK
OK
OK
OK
TRANSMISSION
(default)
Fixed Code
ROLLY
FIXY
50 codes storable
Rolling
Code
It is also
a Fixed
code
Cloner
Dip Switch
Rolling
Code
(default)
RTA2
Wireless
Fixed Code
TRP1
To be
powered
through
mains
Fixed code Rx on CTR Rolling Code Rx on CTR RPAU2, RPAU2K, RPAU2SA
ARTICLES
SMARTY
868
FEATURES
It is also
a Fixed
code
Cloner
868,35 MHz
TRANSMISSION
Rolling
Code
(default)
Fixed Code
(to be
selected)
Rolling
Code
(default)
RTA8
RSK4N
1000 codes storable
50 codes storable
RPSK4
50 codes storable
50 codes storable
100 codes storable
1000 codes storable
FIXED CODE & ROLLING
COMPATIBLE*
ROLLING CODE
ONLY
FIXED CODE & ROLLING
COMPATIBLE*
ROLLING CODE ONLY
OK
OK
OK
OK
OK
NO
OK
NO
OK
OK
OK
OK
OK
NO
OK
NO
Wireless
Fixed Code
(to be
selected)
*Receiver can store also rolling code remotes, but without performing rolling algorithm check
30
Secret Key System
SMARTY
SMARTY, not only is it a fixed code
copier and remote, but it is also a
programmable remote to be used in
order to implement Secret Key System.
RSK4N/RPSK4N
Classic receiver for rolling code can be
switched for operating in Secret Key
System mode.
PS01 + LebManager SW
Inductive programmer for SMARTY
remotes, to be used together with
Windows based SW LebManager
What is Secret Key System of Leb electronics?
It is a Transmitter/Receiver system that allows to delete, insert, change any remote control stored into a specific
receiver RSK4N (433,92 MHz) or RPSK4 (868,35 MHz), but only if authorized. ANY OPERATION CAN BE
CARRIED OUT FAR FROM INSTALLATION. It is based on rolling code transmission. Moreover, with a PC
and the dedicated included SW LebManager, it makes possible to store and manage codes and names directly
to the receiver through Bluetooth protocol. Database can be stored on a dedicated memory card or on PC.
How does Secret Key System work?
Any radio transmitter SMARTY can be a rolling code or fixed code/copier remote, but inside there is also an
electronic circuit programmable by PS01, able to turn its transmission into “Secret Key” standard. Beside
normal use, the remote can transmit instructions to the specific receiver in order to modify previously stored
codes or enter a new one.
How many parts Secret Key System consist of?
It is a user-friendly and very easy system. It consists of



Receiver RSK4N(433,92 MHz) o RPSK4N (868,35 MHz),
Radio transmitter SMARTY433 (433,92 MHz) or SMARTY868 (868,35 MHz)
Programmer PS01 + Windows based SW LebManager
What are the advantages of using Secret Key System?
The system is very useful when in need of controlling a large number of remotes, codes and receivers on same
installation. The installer can count on a database of codes and only himself has privileges for storing and
modifying codes in the receiver. New radio transmitters can be stored, removed or changed without being
on installation site. Receivers, once installed, do not need to be manually operated, being possible to
communicate through Bluetooth.
31
Far Storing System
SMARTY
ROLLY
CTR50, CTR57,
CTR58, CTR59,
CTR31, CTR32,
CTR54, CTR29,
CTR30
RSK4N
RWAU2SA
RKAU2
RWAU2
BSK1
What is “Far Storing” feature?
It is a special feature that makes possible to store new Leb rolling code remotes without manually operating
on the receiver.
Why is it so important?
Because if the receiver of your installation is working only in rolling code mode, rolling remotes cannot be
cloned. In case you need to add new remotes, you must manually operate on the receiver. With Far Storing
feature, instead, you can add new remotes just by operating on push buttons of a new remote to be stored,
together with a remote already stored.
What do I need in order to get Far Storing feature work?
When your installation is working with any of CTR50, CTR57, CTR58, CTR59, CTR31, CTR32, CTR54,
CTR29, CTR30 control boards, or RWAU2SA, RKAU2 RWAU2 receivers and any of SMARTY (in rolling code
mode), ROLLY, TRK4 remotes, you can use Far Storing feature.
Can I use Far Storing feature also for Leb receivers not working in rolling code (i.e. fixed code)?
Yes you can. Most of Leb receivers, when new, can be irreversibly set into rolling or fixed code (rolling
compatible). In fixed code mode, as an alternative, you might also find convenient to copy your remote
(TSAW4N as well) straight into SMARTY remote, as receiver won’t perform rolling code algorithm check.
Is the procedure difficult to do it?
No, it is very simple, only a couple of pushes. Just make sure to be within working range of receiver while
storing new remotes into installation.
32
WHERE WE ARE
Leb electronics is located in Acquafredda (BS), Via Caduti del Lavoro, 1 (Z.I.), CAP 25010
GPS coordinates:
DMS 45°18’39,2” N 10°25’13,8” E
DDD 45,31099 10,42051
Coming from A4 highway, take the
Desenzano exit and keep driving
towards Asola/Parma up to getting to
Acquafredda.
Coming from highway A21, take the
Manerbio exit and follow Leno
indication, once there keep following
Gottolengo indication and once there
keep driving to Acquafredda.
33
General Sales Conditions
ARTICLE 1
WARRANTY
1.1. With exception of what expressly agreed each time
between the parts, Leb electronics guarantees the conformity of
the supplied products and anything else explicitly agreed.
Warranty due to defects is limited only to product defects due to
materials or manufacturing defects that can be referred to Leb
electronics.
The warranty does not apply in case of:


Malfunctions or damages related to transport;
Malfunctions or damages caused by anomalies of the
electrical mains or any incorrect use of the product;

Tampering or damages caused by unauthorized
personnel and/or due to use of non-genuine Leb
electronics articles and/or spare parts;

Defects and/or damages caused by chemical agents
and/or atmospheric phenomena (e.g. lightning
strikes, etc.);

Replacement of parts that are subjected to usage
wearing, as lamps, batteries, etc.

Products without an identification plate.
This warranty shall expire in case any non-genuine Leb
electronics accessory is installed.
1.2 Warranty on Leb electronics operators has a validity of 20
months beginning from the start-up date, when a suitable
evidence of that is available, and in any case not longer than 24
months from the production date.
The warranty is subjected to an expressly written request to Leb
electronics to act according to the points here below indicated.
No return of goods or debit notes will be accepted if not
previously authorized by Leb electronics. With this request,
within a reasonable time and at its own will, Leb electronics will
either:
a) supply the buyer with free of charge and ex-works
products of the same quality and type of the faulty or
non-standard ones; Leb electronics can also ask the
buyer to send back the faulty goods at its own
expenses; these goods will become Leb electronics’
property.
b) Repair at its own expenses the faulty products, or
modify non-standard products. In this case, all
transport costs will be at the buyer’s expenses.
c) Supply spare parts free of charge: all transport costs
are at the buyer’s expenses.
1.3 The warranty, as per this article, absorbs and replaces all
legal warranties due to defects and differences and excludes
any other Leb electronics liabilities that could be originated by
the supplied products; in particular, the Buyer will not be able to
claim any other further requests.
Leb electronics shall not be responsible for any further claims
once the warranty period has expired.
ARTICLE 2
CLAIMS
2.1 It is understood that, as applied by Italian Law nr. 21 June
1971, art. 1:
“Claims regarding quantity, weight, gross weight and colour, or
claims regarding faults and defects in quality compliance which
the Buyer could discover on delivery of the goods, shall be
submitted by the Buyer within 7 days from the delivery, under
penalty of nullity of the warranty”.
ARTICLE 3
DELIVERY
3.1 Any liability from damages ensuing from total or partial
delayed or failed delivery shall be excluded.
ARTICLE 4
PAYMENT
4.1 Any delayed or irregular payment shall entitle Leb
electronics to cancel any ongoing agreement, including
arrangements not related to the current issue, as well as
entitling Leb electronics to claim damages, if any.
4.2 Leb electronics shall however have the right to claim
overdue interests at bank rate in Italy increased by 5 points. In
case of failed payment Leb electronics shall have the right to
cancel all warranties on goods, regarding the Customer as
insolvent.
4.3 The Buyer shall be bound to full payment, even when claims
or disputes are under way.
ALL INFORMATION HAVE BEEN WRITTEN AND CHECKED
WITH THE GREATEST CARE.
HOWEVER, LEB ELECTRONINCS DOES NOT TAKE ANY
RESPONSIBILITY FOR ERRORS OR OMISSIONS.
LEB ELECTRONICS CAN CHANGE, AT ANY TIME AND
WITHOUT PREVIOUS WARNING THE CHARACTERISTICS
AND THE PRICES OF ALL ITS PRODUCTS.
ALL PRICES MENTIONED IN THIS DOCUMENT ARE IN
EUROCURRENCY AND WITHOUT VAT.
MINIMUM ORDER IS EURO 500,00. BELOW THIS AMOUNT
LEB ELECTRONICS HAS THE RIGHT NOT TO CONFIRM
ORDER.
34
NOTES
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
35
36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement