Changing the Toner in Hewlett Packard Laser Printers

Changing the Toner in Hewlett Packard Laser Printers
IT Quick Reference Guides
Changing Toner in Hewlett Packard Laser Printers
Hardware Guides
This guide covers how to change a toner cartridge in a HP LaserJet printer.
If the printer declares "Toner Low" and the print-outs are pale then please follow these instructions:
Remove the Toner Cartridge. In most printers, you open the top flap of the printer. The toner cartridge is the large black
box contained within. Pull it out gently towards you and up (it may need a bit of wiggling, but be gentle with it!):
Carefully shake the cartridge (toner is difficult to remove from clothes...) - it may not be quite finished yet and could go for
some time yet. Toner is expensive so it is always worth doing this.
To reinsert the toner cartridge, slide it back down and forward in a reverse of the moves you made getting it out.
The printer will then run a self-check. Wait till it has finished. If it says "Ready" all is well. If it still says "Toner Low" then please call
the Help Desk at 410-677-5454 or put in a ticket at to request a replacement.
Salisbury University IT Help Desk | 410-677-5454| Last Edited: 6 June 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF