C:\Users\JU\Desktop\Charger Ins

C:\Users\JU\Desktop\Charger Ins
General Description :
The Battery charger is for charging lead acid
traction batteries only. The charger is electronically protected
against over current, short circuit and reverse battery
connection. The charging profile is constant current followed
by a forced taper, while sensing voltage to evaluate 100%
charge condition.
FRONT VIEW
TOP VIEW
Location of Charger:
Install the charger in a cool, dry, well ventilated
location away from corrosive fumes and moist atmosphere. Allow 200mm free space on all sides for
proper ventilation refer pictures (as shown in fig1&2) .
(fig-1)
Note:
Park the vehicle for charging in a position as shown while ensuring that the cable is not stretched while connecting to the charge port. Cable length provided is only 2.5M.
(fig-2)
198mm
C U T T H IS T E M PL AT E & U S E T HIS TO D R IL L H O L E A S S H O W N
B E L O W IN T H E C H A R G E R M O U N T IN G IN S T R U C T IO N S
1:1 SCALE
CHARGER MOUNTING INSTRUCTION
Procedure for installation of charger:
Step1 : Drill holes using the given template.
Packing List:
1. Battery Charger 48V25A - 1No
2. Mounting Template
- 1No
3. Fisher
- 2Nos
4. Screw
- 2Nos
Step2 : Insert plastic screw plugs to the drilled hole.
Step3 : Fasten screw to the plug, such that the screw head is projected 1’’ from the wall surface.
Step4 : Mount the charger onto the screws installed in the wall as shown in the illustration below.
Download operation manual at www.mainimaterials.com
Manufactured by :
Maini Materials Movement Pvt Ltd.
SY.NO.32, Chandapura, Hosur Road,
Bangalore-560099. India.
TEL : +91 80 4352 6555
FAX : +91 80 4352 6580
Email : customercare@maini.com
Web : www.mainimaterials.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising