Atomic 2910 EFI Throttle Body Kit Instruction manual

Below you will find brief information for Throttle Body Kit 2910. This product is designed to be a simple to install, self-tuning EFI system capable of adding performance to your engine. The Atomic TBI is designed to install on a standard square bore intake manifold flange. It is a self-tuning EFI system that continuously adjusts after the basic configuration is complete. There is no laptop programming. Base on the engine descriptors that you input during the initial setup, the Atomic will automatically create a base fuel map to get the engine running. Once the system is started the self learning technology will optimize those maps resulting in the best performance possible. If you drive through altitude changes, temperature swings or other factors the Atomic will adjust accordingly, on the fly. This ensures that your engine will produce excellent driveability at all times, even from the sunny coast to the cool mountains.

PDF Download
Document
MSD Throttle Body Kit 2910 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Self tuning EFI system
  • No PC required
  • Wide-band O2 sensor
  • Fuel pump control
  • Timing control
  • Nitrous and boost support

Frequently asked questions

The Atomic TBI is a self-tuning EFI system designed for simple installation and improved performance. It requires no laptop programming and automatically adjusts based on engine descriptors and driving conditions.

The Atomic TBI can work with both return and returnless fuel systems. It's recommended to use an in-tank pump for better performance and quieter operation.

To use the Atomic TBI's timing control features, you need an MSD Ignition Control and an adjustable rotor.
Preparing document for printing…
0%