Edimax Gigabit 24-port L2 managed switch with 4 SFP ports

Gigabit 24‐p
port L2 Plus Management Switch
with 4 SFP slots
Product Description
Product Description
ES‐5240GM, a 24‐port Gigabit L2 Plus management Switch
h, is a standard switch that meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications. The switch includ
des 20‐Port 10/100/1000Mbps TP and 4‐Port Gigabit TP/SFP Fiber dual media. The switch can be managed thro
ough RS‐232 serial port, or through Ethernet port using CLI or Web‐based management interface, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure a
and control each port’s activity in a friendly way. The p
y y
overall network management is enhanced and the networrk efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features co
omprehensive and useful functions such as QoS
(Quality of Service), Spanning Tree, VLAN, Port Trunking, B
Bandwidth Control, Port Security, SNMP/RMON, IGMP Snooping capability via the intelligent software. The ES‐52
240GM is suitable for both metro‐LAN and office applications. Key features
4 SFP slots for flexible fiber connection
9KB Jumbo Frame support
IEEE 802.1x Access Control to improve network seccurity
Port Mirroring to help IT manager monitor network traffic
Q‐in‐Q VLAN for performance & security
4,094 VLAN groups
g p
IEEE 802.1D compatible, 802.1w Rapid Spanning TTree and 802.1s Multiple Spanning Tree
Unknown Unicast/Broadcast/Multicast Storm Conttrol
Multicast VLAN Management for IPTV
IP‐Mac‐Port binding for LAN security
QCL based on application traffic for QoS and rate liimitation management
ACL based on Ethernet Type / ARP / IPv4 for packeets permit or deny, rate limitation and port copy
DHCP Option 82 relay agent
DHCP Option 82 relay agent
QoS with four priority queues
The QoS(Quality Of Service) Control List (QCL) feature pro
QoS(Quality Of Service) Control List (QCL) feature pro
ovides four internal queues to support four different
ovides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay‐sensitive traffic. The ES‐52
240GM can classify the packet as one of the four priorities according to VIP port, 802.1p priority tag, DiffServ and/or IP TOS, IPv4 and UDP/TCP application traffics. The QoS operate at full wire speed. The actual sccheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both.
P Mi
Port Mirroring
It is based on ACL function to classify the ingress traffic to
o do port copy. This mechanism helps track network errors or abnormal packet transmission without interrup
pting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror captu
ure port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possiible but can create congestion at the mirror capture port.
Q‐in‐Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better ssecurity. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performancce. Q‐in‐Q, the use of double VLAN tags is an efficient method for enabling Subscriber Aggregation. This is very
h df
bli S b ib A
Thi i
useful in the MAN.
f l i h MAN
Isolated Group, provides protection for certain ports
The isolated group feature allows certain ports to be designated as protected. All other ports are non‐isolated. Traffic between isolated group members is blocked. Trafffic can only be sent from isolated group to non‐isolated group.
Mac‐based 802.3ad LACP with automatic link fail‐over
Dynamic fail‐over means packets will not get assigned to
o any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports. 802 1 A
802.1x Access Control improves network security
802.1x features enable user authentication for each netw
work access attempt. Port security features allow you to limit the number of MAC addresses per port in order to ccontrol the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mech
hanism based on user and machine identities, as well as control the number of access stations.
control the number of access stations.
802.1d Compatible & 802.1w Rapid Spanning Tree & 80
02.1s Multiple Spanning Tree
For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in the event of any fail‐over switch on the network.
4 dual media ports for flexible fiber connection
4‐Port 21,22,23,24 dual media ports are provided for flexxible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or llong distance fiber backbone attachment. Use of the SFP module will disable their corresponding built‐in 10/100/1
1000Base‐T connections.
Broadcast/Multicast/unknown‐Unicast Storm Control
To limit too many broadcast/multicast/unknown‐unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured
d upper threshold.
IP‐MAC‐Port Binding
The IP network layer uses a four‐byte address. The Ethernet link layer uses a six‐byte MAC address. Binding these two address types together allows the transmission of data between the layers. The primary purpose of number of authorized users. Only the authorized client IP‐MAC binding is to restrict the access to a switch to a n
can access the switch’s port by checking the pair of IP‐MA
AC Addresses and port number with the pre‐configured d t b
database. If an unauthorized user tries to access an IP‐M
th i d
ti t
IP MAC binding enabled port, the system will block the AC bi di
bl d
t th
ill bl k th
access by dropping its packet.
Access Control List (ACL)
The ACLs are divided into EtherTypes. IPv4, ARP protocol, MAC and VLAN parameters etc. As you create ACEs for g
g p y
p rt and each policy can be applied to any port. This p y
ingress classification, you can assign a policy for each por
makes it very easy to determine what type of ACL policy you will be working with.
Technical Specifications
Complied Standards
IEEE 802.3x Flow Control capability
IEEE 802.1q VLAN
IEEE 802.1p
Switching capacity:
24 Gigabit Ethernet ports with non‐blocking wire sp
Gigabit Ethernet ports with non blocking wire sp
peed performance
peed performance
8 K MAC addresses Supports Jumbo frame up to 9K Unknown Unicast/Broadcast/Multicast Storm Supprression
Port Mirroring
Port‐base VLAN
IEEE802.1q tag‐base VLAN, up to 4,096 active VLANs
Q‐in‐Q is an efficient method for enabling Subscribeer Aggregation
Multicast VLAN management
Supports QCL for Layer 4 TCP/UDP Port and ToS Classsification
Supports 802.1p QoS with four level priority queue
Supports priority in a Q‐in‐Q tag
Bandwidth Control
Supports bandwidth rating per port ingress and egreess rate limit 500Kbps~1000Mbps with 1Kbps
VSM (Virtual Stacking Management) Supports 16 devices (alike model) stacking
Multiple switches can be managed via one IP address, just like software stacking
Multiple switches can be managed via one IP addre
ss just like software stacking
Low cost and easy to establish network environmen
nt, no extra hardware required
Port trunking with 12 trunking groups
up to 16 ports for each group
t 16
t f
802.1q with GVRP/ GARP
Supports IGMP snooping including active and passivve mode
Network Security
802.1x access control for port based and MAC based authentication
Management Access Policy Control
Access control List
IP‐MAC‐Port bindingg
DHCP relay agent
Snmpv1,v2c Network Management
■RFC 1213 MIB (MIB-II)
■Interface MIB
l ti MIB
Statistics Group 1
Hi t
Alarm Group 3
Event Group 9
FC 1493 Bridge MIB
FC 1643 Ethernet MIB
■Entterprise MIB
LED Indicators
Port 1-24
Port 1-24
Port 21,22,23,24
Network Interface
10/100/1000 Mbps TP Jack (RJ‐45)
10/100/1000 Mbps TP Jack (RJ
1000Mbps SFP Fiber Module
Dual Media Auto Detection
1 to 20
1 to 20
TP(RJ‐45) / SFP
Hardware Specifications
Voltage 100∼240 V
Frequency 50∼60 Hz
Consumption 40W
Ambient 0° to 40°C
Temperature Humidity 5% to 90%
Dimensions 442(W) × 44(H) × 209(D) mm
2.82 Kg
Complies with FCC Parrt 15 Class A & CE Mark approval
Packing Information Carton Dimensions (mm)
N.W (KG)
G.W (KG)
530 (W) x 512 (D) x 345 (H)
2.82 Kg
3.82 Kg