crestron electronics

crestron electronics
CRESTRON ELECTRONICS
TABLE OF CONTENTS
page
CRESTRON
page
PERFORMANCE PAKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Products Plus People . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Crestron Around the World. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
AUDIO DISTRIBUTION & CONTROL
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Solutions for Business, Education and Government . . . . . . . 6, 7
Processors, Tuners and Accessories. . . . . . . . . . . . . . . . . . . . . 124
Technologies for the Connected Lifestyle . . . . . . . . . . . . . . . 8, 9
Complete Audio Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
True Blue Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Industry Leadership Through Training. . . . . . . . . . . . . . . . . . . 11
VIDEO DISTRIBUTION & CONTROL
Video Distribution Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
I2P: Seamless Integration into the Crestron Environment. . . . 12
Information at Your Fingertips . . . . . . . . . . . . . . . . . . . . . . . . . 13
Crestron Touchpanels at a Glance . . . . . . . . . . . . . . . . . . . . . . 14
RESIDENTIAL ROOM SOLUTIONS
Room Solution Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Crestron Control Systems at a Glance . . . . . . . . . . . . . . . . . . . 15
ETHERNET SOLUTIONS
TOUCHPANELS
e-Control™ Ethernet Control Solutions . . . . . . . . . . . . . . . . . 139
Isys™ Touchpanel Control Systems. . . . . . . . . . . . . . . . . . . . . . 16
Isys™ Touchpanel Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Isys™ Touchpanel Control System Accessories . . . . . . . . . . . . 31
SOFTWARE SOLUTIONS
e-Control™ Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Compact Wall-Mounted Touchpanels. . . . . . . . . . . . . . . . . . . . 43
Control System Programming Software. . . . . . . . . . . . . . . . . 146
Compact Wall-Mounted Touchpanel Accessories . . . . . . . . . . 44
Wired Touchpanels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
NETWORK INTERFACE AND POWER SOLUTIONS . . . . 147
Wired Touchpanel Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 46
Wireless Touchpanels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
NETWORK CAMERA CONTROL . . . . . . . . . . . . . . . . . . . . . . . . 150
Wireless Touchpanel Accessories . . . . . . . . . . . . . . . . . . . . . . . 50
PRESENTATION SOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
CONTROL PANELS and KEYPADS
Wall Mounted Designer Keypads . . . . . . . . . . . . . . . . . . . . . . . 54
LIGHTING CONTROL PRODUCTS
Wall Box Dimmers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Automation Cabinet Enclosures and Accessories . . . . . . . . . 157
Wall/Lectern Mounted Keypads and Accessories . . . . . . . . . . 62
Wall Box Dimmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Wireless Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Dimmer Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Wireless Control Panel Receivers. . . . . . . . . . . . . . . . . . . . . . . . 70
Switches and Motor Controllers . . . . . . . . . . . . . . . . . . . . . . . 162
Commercial Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
CONTROL SYSTEMS
2-Series Control Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
CRESTRON-CERTIFIED WIRE and CABLE . . . . . . . . . . . . . 167
CNX Control Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Control System Expansion Cards. . . . . . . . . . . . . . . . . . . . . . . . 86
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Control System Accessories, Cables and Power Supplies . . . . 91
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
LOW COST ROOM SOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 101
SMARTOUCH STS
SmarTouch™ Complete Control Systems. . . . . . . . . . . . . . . . 104
SmarTouch™ Control Processors. . . . . . . . . . . . . . . . . . . . . . . 105
SmarTouch™ Expansion Modules. . . . . . . . . . . . . . . . . . . . . . 106
SmarTouch™ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
1
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P RO D U C TS P LU S P E O P L E
T H AT ’ S C R E S T R O N
While our products flourish in businesses
and connected homes worldwide, we’re
constantly at work developing new
generations of Crestron products. We have
the vision to imagine the future and make
it happen today.
Plus... Symbolic of the services and
programs that support Crestron
products. Our I2P
For more than 30 years, Crestron has been
the world’s leading manufacturer of
advanced control and automation systems.
We offer total solutions for integration and
control of audio, video, computer, the
Internet and more.
Partnership Program,
the Crestron Technical
Institute, Crestron
Authorized Independent
Programmers and, of
course, True Blue Support
Our leadership comes from a total focus and
all demonstrate our total commitment to
commitment to providing the best
our industry, and to our customers.
products, programs and services in the
industry – all backed by Crestron’s
dedicated team of people. Products Plus
People – that’s what Crestron is all about.
Products... Innovative technology is the
cornerstone of Crestron. Since the
beginning, we’ve been a pioneer in
the A/V industry, introducing a
number of firsts. We were the
first developers of
microprocessor-based control
systems, and were first to bring to the
industry touchpanel technology for remote
control applications. Crestron was also
first-to-market with e-Control™, a truly
viable Internet-based control solution that is
now the industry standard for harnessing
the power of the Web to control the A/V and
People... Crestron people make the
difference. Our people commit themselves
to deliver unwavering support, turning
problems into solutions. They care about
our customers, and are dedicated to
proving it each and every day.
In addition to our World Headquarters
in Rockleigh,
New Jersey,
Crestron has
sales and
support offices
throughout the
U.S., Canada, Europe, Asia, Latin America and
Australia. Regardless of where they are in
the world, every Crestron office is prepared
to always deliver products and services on
time, every time.
environmental systems of businesses and
homes around the globe.
2
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
Product Plus People. That’s Crestron.
P RO D U C TS P LU S P E O P L E
CRESTRON AROUND THE WORLD
Crestron’s commitment to Products Plus People is not limited by borders, language or
geography. We deliver the industry’s finest customer and technical support from a growing
number of offices throughout the world. Each Crestron office is staffed with factory-trained
personnel in sales, training, customer service and support.
Crestron’s global team understands the cultures and demands of each world market and
provides the personalized solutions you need, when you need them.
NORTH AMERICA
Crestron Electronics
Corporate Headquarters
15 Volvo Drive
Rockleigh, NJ 07647
Phone: 800.237.2041 / 201.767.3400
Fax: 201.767.7576
Customer Support:
888.CRESTRON (888.273.7876)
Crestron Mid-Atlantic
5925 N. Fifth St.
Arlington, VA 22203
Phone: 703.812.4630
Fax: 703.812.4631
Crestron Latin America
Blvd. M. Avila Camacho 37, Piso 1-B
Col. Lomas de Chapultepec
Mexico, D.F. 11560
Phone +52.55.5093.2164/+52.55.5093.2166
Fax +52.55.5093.2165
BRAZIL
Crestron Brazil
Rua Bruno Hering 716
89036-160 Blumenau SC Brazil
Phone: +55.47.326.3033
Fax: +55.47.322.6563
Crestron Midwest
415 West Golf Road, Suite 5
Arlington Heights, IL 60005
Phone: 800.949.3465 / 847.437.6650
Fax: 847.437.6052
Crestron South
11660 Alpharetta Highway,
Suite 400
Roswell, GA 30076
Phone: 877.339.0060 / 678.339.0060
Fax: 678.339.0066
Crestron Florida
407 Center Pointe Circle, Suite 1621
Alamonte Springs, FL 32701
Phone: 866.273.7876 / 407.261.0459
Fax: 407.261.0913
Crestron Southwest
3033 Kellway Drive
Suite 110
Carrollton, TX 75006
Phone: 866.999.1300 / 214.390.8888
Fax: 214.390.8778
Crestron West
4332 Cerritos Avenue, Suite106
Los Alamitos, CA 90720
Phone: 800.827.2188 / 714.827.8988
Fax: 714.827.6553
Crestron Canada
70 East Beaver Creek Rd.
Unit 30, Richmond Hill
Ontario, Canada L4B 3B2
Phone: 905.882.7054
Fax: 905.882.7064
MEXICO, CENTRAL/
SOUTH AMERICA
EUROPE / AFRICA / MIDEAST
Crestron International
Oude Keerbergsebaan 2
2820 Rijmenam, Belgium
Phone: +32.15.50.99.50
Fax: +32.15.50.99.40
Crestron UK Ltd.
MWB Business Exchange
12-50 Kingsgate Road
Kingston-Upon-Thames
Surrey, United Kingdom KT2 5AA
Phone: +44.208.547.4007
Fax: +44.208.408.5440
Crestron France
3 rue des Frères Chausson
92600 Asnieres Sur Seine
Paris, France
Phone: +33.1.47.91.00.00
Fax: +33.1.47.91.00.99
Crestron Germany
Ringstrasse 1,
89081 Ulm-LEHR, Germany
Phone: +49.731.96281.0
Fax: +49.731.96281.50
Crestron Iberica S.L.
Edificio Golden, Ricardo Soriano 72
29600 Marbella (Malaga), Spain
Phone: +34.95.27.68.332
Fax: +34.95.27.68.301
AUSTRALIA / NEW ZEALAND
Crestron Pacific Pty. Ltd
Unit 5, 62a Albert Street
Preston Victoria 3072
Phone: +613.9480.2999
Fax: +613.9480.2988
ASIA / FAR EAST
Crestron Asia, Ltd
Room 2501, 25/F, Westin Centre
No.26 Hung To Road
Kwun Tong, Kowloon,
Hong Kong
Phone: +852.2341.2016
Fax: +852.2344.0889
Crestron Asia - Beijing
Room 710, Level 7, Diyang Building
No. 2 Xin, Dongsanhuan North Rd.
Chaoyang District, Beijing 100027
Phone: +8610.8453.6808
Fax: +8610.8453.6809
Crestron Asia - Guangzhou
Rm 906A, The Time Plaza Central Building
No.28 Tianhe Bei Road
Guangzhou, PR China, 510620
Phone: +8620.3891.0577
Fax: +8620.3891.0580
Crestron Asia - Shanghai
Room 2110, Unicom Intl. Tower
547 TianMu Road West
Shanghai 200070
P.R. China
Phone: +.86.21.6353.5867
Fax: +.86.21.3303.1025
Crestron Asia - Singapore
No.1, Sims Lane #06-01
Singapore 387355
Phone: +65.6846.0215
Fax: +65.6846.0216
Crestron Asia - Malaysia
Suite 1.01(B), 1/F, Plaza Hamodal,
Jalan, 13/2, Section 13
46200 Petaling Jaya
Selangor, Malaysia
Phone: +603.7958.3220
Fax: +603.7958.3221
Crestron Asia - Taiwan, Ltd.
1/F, No. 18, Alley 4, Lane 123
Nanjing E. Road, Taipei (105)
Taiwan R.O.C.
Phone: +88.622.762.2257
Fax: +88.622.763.7126
Crestron Japan
B1, 4-3-6 Shibuya,
Shibuya-ku,Tokyo, Japan #150-0002
Tel +81.3.5774.1361.
Fax +81.3.6418.0337
3
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P RO D U C TS P LU S P E O P L E
C R E S T R O N P R O D U C T OV E RV I E W
Control Systems
Isys,™ our award-winning family of advanced
Control systems serve as the central intelli-
touchpanel systems. Isys panels are truly
gence of any A/V system, providing the link
global touchpanels, capable of operating
to every device in the control network. With
any number of devices and linking to
our previous generation of control systems
multiple control systems anywhere in the
entrenched in the market as the most
world via the Internet. With eye-catching
reliable and sophisticated system of its time,
good looks, revolutionary modular design,
Crestron took another step forward with the
and full Internet compatibility, Isys touch-
introduction of the 2-Series Control Systems.
panel systems are a living symbol of
Comprised of the PRO2, AV2, RACK2 and
Crestron design and innovation.
PAC2, as well as the cost-effective CP2,CP2E,
The Isys TPS-6000, TPS-5000, TPS-4500 and
MP2 and MP2E, the 2-Series systems are
TPS-3000 all feature high resolution, XVGA
ideal for
color touchscreen displays and deliver the
control
most vivid, crisp control screen graphics
and
on the market today. Isys touchpanels are
automa-
available with 15",12" or 6.4” screens,
tion of
tabletop tilt or wall enclosures, and plug-in
audio, video, lighting, security and HVAC in
modules for Ethernet, computer, video and
any commercial facility, educational setting
audio and wireless capabilities.
or connected home.
Compact Wall-Mounted Touchpanels
At the core of the 2-Series is a completely
Combining the best of a touchpanel and
redesigned new dual-bus control engine
keypad, Crestron offers a range of versatile,
based on the hottest new 257 MIPS, 32-bit
compact wall-mounted touchpanels – the
Motorola Coldfire® processor. Crestron
TPS-3000L and TPS-2000L that provide
2-Series systems provide an enhanced
many of the advanced capabilities found in
built-in web server, ingenious use of off-the-
the larger Isys
shelf compact flash memory and a new,
panels.
innovative, advanced operating system.
These
2-Series systems have a unique “self-healing”
compact, wall-
feature that can load a program as soon as a
new touchpanel or other network
device is installed. 2-Series systems also
provides a Built-in Firewall to deliver the
ultimate in security.
Advanced Touchpanels
Crestron touchpanels provide centralized, fingertip control of any audio,
video, computer or Internet device.
The signature Crestron touchpanel is
4
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
mounted Isys
models also feature an active matrix display
that provides the finest quality video and
graphics available on a screen of its size.
With the exclusive Virtual Pan-and-Zoom
feature, just the drag of a finger allows for
panning across the video picture and zooming in for the best view – even with stationary
security cameras.
P RO D U C TS P LU S P E O P L E
C R E S T R O N P R O D U C T OV E RV I E W
The award-winning
Keypads
CT-1000 and the
Crestron keypads are practi-
LC-1000 deliver big
cal, cost-effective solutions
performance within
that provide effortless con-
their compact en-
trol of a wide range of func-
closures, while their
tions. Featuring backlit
affordable pricing, lets you put one in every
engravable buttons and LED
room. Fully customizable for any control
feedback, Crestron keypads are easy to see,
environment, their crisp, clear displays sense
day or night. They play WAV sound files and
changing lighting conditions and automati-
built-in temperature sensors allowing you to
cally brighten or dim to optimize visibility.
monitor the HVAC system in each room.
Add to this impressive list built-in WAV
Available with custom inlays and finishes
sound file storage and playback, plus a wide
that blend elegantly into any interior
range of Designer Finishes – including
design, they may be configured as a single
engravable buttons – to compliment any
or in groups to provide easy-to-use control.
decor.
CRESTRON e-Control™: The Industry
Wireless Touchpanel Systems
Standard for Ethernet-Based Control
The Crestron SmarTouch™ series of light-
Crestron e-Control is the most widely used
weight handheld touchpanels has become
a standard in the world of Home
Theater. The popularity of these
Internet-based control technology in the
world today, in use at most every Fortune
500 company today, and recognized as the
dynamic touchpanels is in their
industry standard for high-speed control
ability to integrate an entire home
system communication.
automation system into one ergonomically
sound, handheld, lightweight device.
Crestron’s e-Control Power Applications
provide real world, Internet-based solutions
Available in one-way (ST-1700C and
that can be used every day to make presen-
ST-1550C) or two-way models (STX-1700C),
tations, maintain equipment and more. In
SmarTouch panels feature Crestron's
addition, Crestron’s new e-Control 2 extends
advanced RF technology that allows the
the capabilities of e-Control technology
user to roam around without ever needing
with ActiveX Web, ActiveX.EXE, ActiveX
to point it at any device.
Emulator and PDA Control.
Digital Video Processor
The remarkable DVP4 is a digital video
processor, touchpanel interface, seamless
crosspoint switcher with full effects and a
powerful 2-Series control engine that can
display four high-resolution windows
simultaneously on a single monitor,
projector or plasma screen.
5
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P RO D U C TS P LU S P E O P L E
S O LU T I O N S F O R B U S I N E S S , E D U C AT I O N A N D G OV E R N M E N T
Crestron technology solutions allow for the
seamless control of all aspects of corporate
presentations, videoconferencing and
distance learning, as well as command and
control centers, help desks and electronic
courtrooms and correctional facilities.
Nearly every Fortune company today has
chosen to standardize on Crestron for their
corporate facilities. Companies like Cisco,
AT&T, Morgan Stanley, Boeing, Gannett and
Intel are just a few that rely on Crestron
everyday for control and integration of their
facilities. In addition, many of the world’s
most prestigious colleges and universities
sites to the Global Operations Center and
seamlessly synchronize and control A/V and
communications throughout each facility.
Crestron technology also enables these
companies to host global, interactive
presentations and meetings.
such as the Wharton School of Business and
the Massachusetts Institute of Technology
Education and Distance Learning
use Crestron to help enable them to teach
Crestron e-Control provides the ability to
“without walls”.
link classroom control and students anywhere using a LAN/WAN or Internet connec-
Videoconferencing/CODEC Farming
tion. Many schools, large and small, have
Videoconferencing is playing a larger role in
the world of global
business than ever
before.
With Crestron
e-Control,™ a great
way to offset the
cost of high
quality CODECs
across a corporate facility is provided
through the use of a centrally located
control processor.
Command and Control/
chosen Crestron technology as the way to
Global Operation Centers
teach and link students in classrooms and
With the power of e-Control providing the
across campuses around the world.
key networking support, Crestron control is
used in many of the world’s largest business
command–and–control centers. Companies
like AT&T rely on Crestron to link multiple
6
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
These days, distance learning extends beyond
the educational community. Large corporations find that using the same presentation
P RO D U C TS P LU S P E O P L E
S O LU T I O N S F O R B U S I N E S S , E D U C AT I O N A N D G OV E R N M E N T
techniques allows them to maximize train-
intelligent. Emails and pages can be sent
ing time and resources by getting more
when unexpected system repairs, or security
employees involved in the process. This
concerns arise. Crestron e-Control also allows
reduces expensive and time-consuming
you to monitor and maintain any system
travel. Crestron has the answers to provid-
remotely through any Internet connection.
ing far end control without the need for
additional, dedicated communication lines
by using the Internet as the control
communications pipeline.
Help Desk
With Crestron, monitoring as many rooms
as you like simultaneously from one central
location, is simple. Should a presenter or
Government
instructor need assistance with a presenta-
Government and Armed Services facilities
tion, a remote location acting as a help desk
around the
can start a presentation, change room light-
world employ
ing, and turn equipment on or off. Any function that can be controlled from within the
room is now available from virtually any PC
with a web browser.
e-Courtroom
Crestron e-Control simplifies and automates
an assortment of typical courtroom tasks.
Now, all users can control a variety of sources
as well as monitor distant rooms and coordinate conferences from other sites. With the
advanced Crestron technologies and control solutions. The Pentagon is just one
example where government officials rely on
addition of scheduling and voting software,
e-control can provide complete management
of today’s electronic courtroom.
Crestron technology to monitor world
Electronic Correctional Facility
armed forces activities 24/7/365.
Security and redundancy go hand in hand.
Building and System Monitoring
Building and System monitoring takes
advantage of a wide range of Crestron technologies. Crestron systems monitor activity
in all rooms, determine equipment usage,
and maximize the capability of the entire
facility. System upgrades and maintenance
are easier than ever, since updates for
scheduled repairs and maintenance are regularly reported. Crestron systems are also
What better way to ensure all functions and
operations are secure than by connecting
Crestron’s dual processor card cage to a
high-speed Ethernet backbone. Computers
with access to the LAN/WAN can monitor
every area of the facility. Crestron e-Control
links security cameras, door sensors, heat
and motion sensors as well as control over
lights, audio and video distribution systems
for total facility control.
7
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P RO D U C TS P LU S P E O P L E
C R E S T R O N H O M E – T E C H N O LO G I E S F O R T H E CO N N E C T E D L I F E S T Y L E
The homeowner of today has an ever-
Producing audiophile quality, professional
increasing amount of electronic devices and
audio distribution
entertainment sources at their disposal.With
processors like the
so many options and alternatives to choose
CNX-PAD8A and
from, homeowners are looking for uncompli-
the CNX-BIPAD8
cated, stress-free ways to make it all work
deliver audio from
together.
any source into as many as 32 separate
Crestron has taken our decades of experience
in creating sophisticated control systems for
The revolutionary Crestron CNX-PVID8X4
Crestron Home,™ a range of products and
and CNX-PVID8X3 video processors accept
solutions for the connected homes of today
component, S-video and NTSC/PAL compos-
and tomorrow. Crestron Home provides
ite video sources, including HDTV signals,
seamless integration of whole-house audio
and distribute them to display devices
and video, home theater, lighting, security,
throughout the home via CresCAT
climate, communications, the Internet and
structured wiring.
Only Crestron offers a range of professional
Home Theater
audiophile amplifiers for a variety of applica-
Crestron Home theater solutions can
tions: the CNAMPX-16X60, a16-channel, 60
help make the full cinema experience
watts-per-channel amplifier for eight rooms;
at home a reality.While replacing that
the CNAMPX-12X60, a 12-channel, 60 watts-
awkward collection of remotes with
per-channel amplifier for six rooms; and the
one smartly designed Crestron touch-
CNAMPX-2X60, a 2-channel, 60 watts-per-
panel, all the audio and video sources,
channel amplifier for a single room.
projector, screen, lighting and drapes
in a home theater can be controlled
effortlessly.
Crestron intelligent amplifiers run over the
control network, thus providing remote
system and zone on/off capabilities, and
Crestron SmartTouch™ wireless touchpanels
reporting internal temperature for the
are among the most popular choices in the
protection of the entire audio system.
world for home theater controllers. Crestron
also features a range of digital amplifiers
and processors specifically designed for
Surround Sound that help create the total
cinema experience.
Audio and Video Distribution
Crestron Home offers the world’s best multizone distribution system for whole-house
audio and video.
8
©2002 Specifications subject to change without notice.
using CresCAT structured wiring.
the commercial market and developed
more, while keeping it all simple and fun to use.
Crestron Elec tronics, Inc.
rooms and areas throughout the home
800.237.2041 201.767.3400
www.crestron.com
To complete the system, Crestron ST-TUNE
integrated AM/FM/TV tuner provides access
to favorite presets for AM, FM, or TV channels,
including digital station display and secondary audio program capability for foreign
language broadcasts.
Control of each room is easy using one of the
many Crestron touchpanels or keypads.
P RO D U C TS P LU S P E O P L E
C R E S T R O N H O M E – T E C H N O LO G I E S F O R T H E CO N N E C T E D L I F E S T Y L E
Lighting
Crestron Home technology provides peace
Crestron has provided advanced, reliable
of mind by allowing homeowners to monitor
lighting control and dimming systems for
all surveillance cameras and motion detectors
more than twenty years.
around their property. They also report any
With our comprehensive range of lighting
control and dimming systems fully and
seamlessly integrated into a Crestron Home
automation system, moods both subtle and
window or door left ajar, or arm/disarm an
entire security system at once – or zone by
zone – all with a single command.
Environment/Climate
dramatic can be created instantly
The ultimate in comfort control, Crestron
with the simple touch of a button,
Home products and solutions allow the home-
on any touchpanel or a keypad.
owner to control their entire home environ-
Crestron’s family of home light-
ment from any touchpanel or keypad.
ing products include a variety of
All Crestron touchpanels and keypads have
dimmer modules that allow dim-
built-in temperature sensors to measure
ming of incandescent, magnetic
ambient room temperature and deliver the
low voltage, and electronic low
reading to the graphic display. Crestron
voltage for total flexibility in
Home solutions optimize a home’s comfort
lighting design. These options
provide the ability to set the perfect mood for every room and
activity.
Also available to enhance any
home system are a host of specialized switches and motor controllers, for on/off switching and
control of motors for screens and
drapes, ceiling fans, projector lifts
and more. Crestron lighting systems are programmable using Crestron’s award-winning
software tools.
and energy efficiency by automating all
HVAC controls and home appliance usage.
With the seamless integration of whole-house audio
Security
The ability to control
and monitor home
security is one of the
most fundamental
requirements of any
home today.
and video, home theater,
lighting, security, climate,
communications, the
Internet and more, Crestron
Home is technology for the
connected lifestyle.
9
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P RO D U C TS P LU S P E O P L E
T R U E B LU E C U S TO M E R S U P P O RT
Loyalty. Trust. Effort.
Our dedication to True Blue Support
What you need, when you need it.
ensures that we will never lose site of our
core principal – focus and
That’s what “True Blue” means
commitment to our partners and
at Crestron. That’s also what
our industry. We continue to
we call our award-winning
devote new energies to devel-
service and support program
oping future technologies and
and the team of dedicated professionals who work behind the
scenes for you and your needs.
Our people make True Blue Support
supporting
the trustworthy resource it is. Whether it’s
them with
a product that needs to be replaced or if
the same
on-site assistance is required, Crestron True
loyalty.
Blue Support can be counted on to help, no
True Blue Customer Feedback
questions asked.
True Blue is nothing new at Crestron.
Customer
support has
always been the
top priority.
Regardless of
whether the call
is placed to our
company headquarters in New Jersey or to
any of our regional or international offices,
Crestron True Blue Support will be there,
24/7/365 to support our customers.
Another benefit of True Blue Support is
access to Crestron’s Technical Sales and
Engineering Services. Together, they
provide:
System Engineering and Programming
Touchpanel and program design
assistance
e-Control™ programming and integration
Onsite troubleshooting
10
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
Here’s what our customers recently said about
Crestron’s True Blue Customer Support:
“Your entire Customer Support staff are by far
the most committed, best trained people in the
entire industry. They deliver products and service on a highly professional level – on time,
every time.”
Jacques Lake
MCSI
“On behalf of HB Communications I extend
thanks to Crestron for their support in solving
the issues we experienced on a large project we
recently completed.
Crestron’s True Blue team was quick to respond
with a 4-person team at the project site and
quickly identified the problem. Because of the
advanced resources that were dispatched, the
problem was quickly resolved and a solution
was implemented on the spot.
As usual, the sprit of cooperation between our
organizations produced an effective and timely answer to our mutual customer's needs.
We look forward to the deployment of
Crestron's "2-Series" and the advanced control
solutions and user interfaces that it will allow
us to deliver. The raw "horsepower" of the
2-Series processor is much more than we could
have hoped for.”
Jim Smith
HB Communications, Inc.
P RO D U C TS P LU S P E O P L E
I N D U S T RY L E A D E R S H I P T H R O U G H T R A I N I N G A N D C E RT I F I C AT I O N
As important as anything we do, Crestron
prides itself on our commitment to training. The investment we make in training
Crestron Authorized Independent
Programmers
The title of Crestron Authorized
is returned many times over when
Independent Programmer is more than just
our partners feel confident in their
a label. Our
to authorized Crestron dealers and are available to other industry professionals for a fee
or through sponsorship.
gives
Crestron
dealers a
R
ME
now
DE
M
service
E
EN
gramming and installation. Classes are free
added
D
classes ranging from system design, pro-
ZE
Institute, we offer a variety of training
S
N AUTH
O
IN DEP
Through the renowned Crestron Technical
value-
O
TR
RI
The Crestron Technical Institute
newest
CR
knowledge of Crestron technology.
NT PROGR
A
direct link
to all authorized qualified independent
The Crestron Technical Institute is, by no
programmers. The directory of Crestron
means, limited to one building, location or
Authorized Independent Programmers is
country. Each Crestron regional and inter-
available at www.crestron.com/caip.
national office provides on-site, factorydirect services, the
same as those provided by our New Jersey
headquarters.
Crestron Authorized Independent
Programmers
are the only
independent
programmers
CTI instructors and
authorized –
cirriculum deliver
and certified
everything needed in
– by Crestron.
order for a partner to
Having a
become a Crestron
Crestron
expert.
Authorized
Crestron Commercial Programming
Levels 1,2 & 3
Crestron Home Programming
Levels 1,2 & 3
Crestron Certification
Crestron Professional Installation
(Commercial and Home)
e-Control™ Design
Crestron recertification (level 4)
Independent Programmer on the job is
having Crestron stand behind it 101%.
11
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
I 2 P : S E A M L E S S I N T E G R AT I O N I N TO T H E C R E S T R O N E N V I R O N M E N T
Control systems lie at the heart of A/V
integration. Because of this, Crestron has
created the industry’s most dynamic
partnership program – I2P.
The I2P Partnership Program is designed to
allow the products of partner manufacturers to operate seamlessly with Crestron
systems. I2P membership includes a
powerful coalition of manufacturers from
many diverse markets. The program
supports audio/video,
security, HVAC, lighting
In conjunction with each
partner, Crestron engineers create custom
modules that allow their
products to communicate and interoperate
within a Crestron control
and other controlled
environment. Our data-
devices that may be incor-
base of I2P software
porated into a system.
modules offers the
Crestron offers an open plat-
Crestron programmer a
form approach that lets I2P
simplified, timesaving
manufacturers’ products
drag-and-drop solution for integration of I2P
perform to their specifications as plug-and-
partner products.
play devices in a Crestron system. Our operating system supports any combination of
This database has been created for our deal-
UDP/IP, TCP/IP, RS-232, IR, 422 and 485
ers to easily incorporate I2P member
communication methods.
products into a Crestron network solution.
Our online Crestron Design Center
(http://www.crestron.com/modules/index.
html) provides complete module description of the partner’s product, including help
files, sample programs, touchpanel layout
and cable diagrams.
12
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
DEALER RESOURCES
I N F O R M AT I O N AT YO U R F I N G E RT I P S
At Crestron, we’re constantly introducing
new products, new features, new software
updates and new tools to make our systems
even more powerful. To get the latest details
on all the products, simply visit
www.crestron.com.
For in-depth technical information on every
product and application imaginable, click
You’ll also find a wealth of resources for
on the Crestron Design Center. This re-
specific marketing efforts, including case
source was
histories, ad archive, high-resolution
developed
photos, back issues of our InSite newsletter,
specifically
promotional items like t-shirts, jackets and
to assist
hats, and a growing list of product and
dealers,
service awards. You can also check out our
consultants
tradeshow schedule, request literature and
and engi-
sign up for CTI classes online.
neers in
researching
products, designing systems, and writing
bid specifications and proposals. Everything
you need is available in one location with a
click of your mouse:
Product Resources including manuals,
engineering specifications, CAD drawings,
product catalogs, product line overviews,
Bookmark www.crestron.com and visit often
for the latest word on the world of control.
sales literature, brochures, and highresolution photos.
Integration Tools such as software
modules that allow partner
manufacturers’ products to operate
seamlessly with Crestron systems.
Tech Tools to make your job faster and
easier, including hot design tips,
application diagrams, Power Factor
Calculator, Programming Design Kit, plus
software downloads and helpful FAQs on
a wide variety of topics.
13
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
C R E S T R O N TO U C H PA N E L S AT A G L A N C E
Crestron Touchpanels offer a wide variety of features and screen sizes, with configurations
for tabletop use or for mounting in walls or lecterns. Be sure to consult individual product pages
for specific details and model options.
14
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
C R E S T R O N CO N T R O L S YS T E M S AT A G L A N C E
Crestron Control Systems offer a wide variety of features and expansion capabilities, with
configurations that are ideal for both large and small systems, controlled locally or across the
Internet. Be sure to consult individual product pages for specific details and model options.
15
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S
TPS-6000 – Isys™ 15” Tilt Touchpanel
There’s nothing in the world that compares with the award-winning Isys touchpanel control system.
The TPS-6000 tilt model is a sleek, state-of-the-art Internet control powerhouse that’s ideal for boardrooms and conference rooms, as well as the ultimate high-tech home theater system. Its 15"diagonal
touch-sensitive LCD display produces a gorgeous high resolution picture for both graphics and video,
either full screen or in a window.The unique modular design allows users to upgrade capabilities
simply by installing expansion cards for RGB graphics, video or Internet communications. Upgrading
to wireless operation is as easy as inserting the 2-way RF wireless module. Standard audio capabilities
include built-in microphone, two stereo speakers, amplifier, mixer and the ability to play stored WAV
files. And the TPS-6000 runs end-to-end on worldwide standard IP Internet Protocol and operates at
10/100 Ethernet.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 15"/38.1cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 1024x768 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Screen Tilt . . . . . . . . . . . . . . . . . . . . . . . Soft-Touch adjustable screen tilt, 30-80 degrees
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black injection-molded case
Connectors:
TPS-6000:
Headphone . . . . . . . . . . . . . . . . . . Mini phone jack
Audio Input/Output. . . . . . . . . . . 8-pin RJ45
RS-232 . . . . . . . . . . . . . . . . . . . . . . 6-pin RJ11
RGBHV . . . . . . . . . . . . . . . . . . . . . . 15-pin high density, supplied by optional TPS-XVGA card
Net/Video . . . . . . . . . . . . . . . . . . . 10-pin RJ45
LAN. . . . . . . . . . . . . . . . . . . . . . . . . 8-pin RJ45
TPS-IMC Interface Module: . . . . . . . Outboard module providing expanded audio/video/network
connections to the touchpanel system (included)
NTSC/PAL VIDEO. . . . . . . . . . . . . . BNCx2 or 6-pin, Composite or Y/C, made active by optional TPS-VID card
NET . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin, for connection to the Cresnet system
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-pin RJ45, for touchpanel connection, plus Composite and S-Video
input made active by optional TPS-VID card
MIC OUT. . . . . . . . . . . . . . . . . . . . . 3-pin, for line level balanced microphone output
AUDIO INPUT . . . . . . . . . . . . . . . . 6-pin RJ11
AUDIO OUTPUT. . . . . . . . . . . . . . . 8-pin RJ45
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in microphone (AGC or fixed gain mode),balanced line level input and output,power
amplifier (2W per channel),audio mixer,two stereo speakers and WAV file capability
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 8MB internal flash memory, upgradeable to 32MB with plug-in memory
modules (TPS-MEM32MB, TPS-MEM16MB) plus 8MB of DRAM
Power Requirements . . . . . . . . . . . . . . 24W, 1A (w/o expansion cards or wireless option)
Dimensions (HxWxD) . . . . . . . . . . . . . 13" (33.1cm) x 14.2" (36.1cm) x 10.6" (26.8cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3lb (4.2Kg) (w/o expansion cards or wireless option)
EXPANSION CARD OPTIONS:
TPS-ENET . . . . . . . . . . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet Card (8-Pin RJ45) Ethernet module provides full/half
duplex TCP/IP and UDP/IP communication via Ethernet/LAN/WAN to any
Crestron IP device. Power: 4W
TPS-VID . . . . . . . . . . . . . . . . . . . . . . Video Module Card (10-PinRJ45) Video input digitizer allows NTSC or
PAL video to be displayed on the touchpanel. Supports both Composite
and S-Video formats, for full screen or window display. Power: 8W
TPS-XVGA . . . . . . . . . . . . . . . . . . . RGB Graphics Card (DB15) RGB interface card allows full screen or
window display of computer video up to 1280x1024. Supports
non-interlaced computer sources at native resolution of 1024x768, and
scales signals of higher and lower resolutions for display. Power: 10W
TPS-XVGA-BV . . . . . . . . . . . . . . . is an RGB Graphics Card w/balanced video allows computer video to be
displayed on touchpanel either fullscreen or in a window. Power:10W
TPS-6000 continued on next page
16
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S
TPS-6000 – Isys™ 15” Tilt Touchpanel
continued from previous page
ADDITIONAL OPTIONS:
TPS-XTXRF . . . . . . . . . . . . . . . . . . Wireless Module and Docking Station for wireless operation
TPS-IMW . . . . . . . . . . . . . . . . . . . . . Interface Module Wall-mounted unit that installs into a two-gang
electrical box. Same functions as the TPS-IMC, but with terminal block
connections
TPS-RFGWX . . . . . . . . . . . . . . . . . Two-way RF tranceiver
HBK-6000 . . . . . . . . . . . . . . . . . . . . Used with or without the rotating base, this sleekly designed hatchback
option is ideal for cable management. It neatly and completely covers
panel connections and includes wire strain relief. The hatchback also
ensures that unauthorized users cannot disconnect the panel.
SMK-6000 . . . . . . . . . . . . . . . . . . . . This handy accessory for the TPS-6000,TPS-5000 & TPS-4500 tilt
models reduces the chance of theft while improving viewing
convenience. The rotating base mounts on the desktop, in a lectern or
conference table and accommodates surfaces of varying thickness. It
rotates 330 degrees and compensates for varying surface angles.The
rotating base kit includes the Hatchback.
17
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
TPS-6000L – Isys™15” Lectern/
Wall Mounted Touchpanel
There’s nothing in the world that compares with the award-winning Isys touchpanel
control system.The wall or lectern mounted TPS-6000LB is a state-of-the-art Internet
control powerhouse that’s ideal for auditoriums or command centers, and the ultimate for
high-tech kitchens or bedrooms. Its 15"diagonal touch-sensitive LCD display produces a
gorgeous high resolution picture for both graphics and video, either full screen or in a
window.The unique modular design allows users to upgrade capabilities simply by
installing expansion cards for RGB graphics, video or Internet communications. Standard
audio capabilities include built-in microphone, four stereo speakers, amplifier, mixer and
the ability to play stored WAV files. And the TPS-6000LB runs end-to-end on worldwide
standard IP Internet Protocol and operates at 10/100 Ethernet.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 15"/38.1cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 1024x768 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal enclosure with injection-molded plastic faceplate in black
Connectors:
Audio Input . . . . . . . . . . . . . . . . . . 6-pin RJ11
Microphone Output. . . . . . . . . . . 3-pin Terminal block
RS-232 . . . . . . . . . . . . . . . . . . . . . . 6-pin RJ11
RGBHV . . . . . . . . . . . . . . . . . . . . . . BNCx5, supplied by optional TPS-XVGAL card
Net . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin Terminal block
Video . . . . . . . . . . . . . . . . . . . . . . . BNCx2 + terminal block, supplied by TPS-VIDL card
LAN. . . . . . . . . . . . . . . . . . . . . . . . . 8-pin RJ45, supplied by TPS-ENETL card
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in microphone (AGC or fixed gain mode), balanced line level input
and output, power amplifier (2W per channel), audio mixer, four stereo
speakers and WAV file capability
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 8MB internal flash memory, upgradeable to 32MB with plug-in memory
modules (TPS-MEM32MB, TPS-MEM16MB) plus 8MB of DRAM
Power Requirements . . . . . . . . . . . . . . 24W, 1A (w/o expansion cards)
Dimensions (HxWxD) . . . . . . . . . . . . . 13.6" (34.4cm) x 14.6" (37.1cm) x 3.1" (7.9cm) with faceplate
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6lb (3.9Kg) with faceplate (w/o expansion cards)
EXPANSION CARD OPTIONS:
TPS-ENETL . . . . . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet Card (8-Pin RJ45) Ethernet module provides full/half
duplex TCP/IP and UDP/IP communication via Ethernet/LAN/WAN to
any Crestron IP device. Power: 4W
TPS-VIDL . . . . . . . . . . . . . . . . . . . . Video Module Card (BNCx2 and terminal block) Video input digitizer
allows NTSC or PAL video to be displayed on the touchpanel. Supports
both Composite and S-Video formats, for full screen or window display.
Power: 8W
TPS-XVGAL . . . . . . . . . . . . . . . . . . RGB Graphics Card (BNCx5) RGB interface card allows full screen or
window display of computer video up to 1280x1024. Supports noninterlaced computer sources at native resolution of 1024x768, and
scales signals of higher and lower resolutions for display. Power: 10W
ADDITIONAL OPTIONS:
RMK-6000 . . . . . . . . . . . . . . . . . . . . Rack mount
BB-6000 . . . . . . . . . . . . . . . . . . . . . . Back box for wall mounting
MODEL OPTIONS:
All the features of the TPS-6000LB with the following exceptions:
TPS-6000LB . . . . . . . . . . . . . . . . . . Enclosure with black plastic faceplate
TPS-6000LW . . . . . . . . . . . . . . . . . Enclosure with white plastic faceplate
18
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
TPS-5000 – Isys™12” Tilt Touchpanel
There’s nothing in the world that compares with the award-winning Isys touchpanel control system.The
TPS-5000 tilt model is a sleek,state-of-the-art Internet control powerhouse that’s ideal for boardrooms
and conference rooms,as well as the ultimate high-tech home theater system.Its 12"diagonal touchsensitive LCD display produces a gorgeous high resolution picture for both graphics and video,either full
screen or in a window.The unique modular design allows users to upgrade capabilities simply by
installing expansion cards for RGB graphics,video or Internet communications.Upgrading to wireless
operation is as easy as inserting the 2-way RF wireless module.Standard audio capabilities include
built-in microphone,two stereo speakers,amplifier,mixer and the ability to play stored WAV files.And the
TPS-5000 runs end-to-end on worldwide standard IP Internet Protocol and operates at 10/100 Ethernet.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 12" / 30.5cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 800x600 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Screen Tilt . . . . . . . . . . . . . . . . . . . . . . . Soft-Touch adjustable screen tilt, 30-80 degrees
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black injection-molded case
Connectors:
TPS-5000:
Headphone . . . . . . . . . . . . . . . . . . Mini phone jack
Audio Input/Output. . . . . . . . . . . 8-pin RJ45
RS-232 . . . . . . . . . . . . . . . . . . . . . . 6-pin RJ11
RGBHV . . . . . . . . . . . . . . . . . . . . . . 15-pin high density, supplied by optional TPS-XVGA card
Net/Video . . . . . . . . . . . . . . . . . . . 10-pin RJ45
LAN. . . . . . . . . . . . . . . . . . . . . . . . . 8-pin RJ45
TPS-IMC Interface Module. . . . . . . . Outboard module providing expanded audio/video/network
connections to the touchpanel system (included)
NTSC/PAL VIDEO . . . . . . . . . . . . . . BNCx2 or 6-pin, Composite, or Y/C, made active by optional TPS-VID card
NET . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin, for connection to devices in the Cresnet system
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-pin RJ45, for touchpanel connection, plus Composite and S-Video
input made active by optional TPS-VID card
MIC OUT. . . . . . . . . . . . . . . . . . . . . 3-pin, for line level balanced microphone output
AUDIO INPUT . . . . . . . . . . . . . . . . 6-pin RJ11
AUDIO OUTPUT. . . . . . . . . . . . . . . 8-pin RJ45
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in microphone (AGC or fixed gain mode),balanced line level input and output,power
amplifier (2W per channel),audio mixer,two stereo speakers and WAV file capability
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 4MB internal flash memory, upgradeable to 32MB with plug-in memory
modules (TPS-MEM32MB, TPS-MEM16MB) plus 8MB of DRAM
Power Requirements . . . . . . . . . . . . . . 20W, 0.8A (w/o expansion cards or wireless option)
Dimensions (HxWxD) . . . . . . . . . . . . . 11.9" (30.1cm) x 13.3" (33.7cm) x 10.6" (26.8cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6lb (3.5Kg) (w/o expansion cards or wireless option)
EXPANSION CARD OPTIONS:
TPS-ENET . . . . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet Card(8-Pin RJ45) Ethernet module provides full/half
duplex TCP/IP and UDP/IP communication via Ethernet/LAN/WAN to any
Crestron IP device. Power: 4W
TPS-VID . . . . . . . . . . . . . . . . . . . . . . Video Module Card(10-Pin RJ45) Video input digitizer allows NTSC or
PAL video to be displayed on the touchpanel. Supports both Composite
and S-Video formats, for full screen or window display. Power: 8W
TPS-XVGA . . . . . . . . . . . . . . . . . . . RGB Graphics Card(DB15) RGB interface card allows full screen or
window display of computer video up to 1280x1024. Supports noninterlaced computer sources at native resolution of 800x600, and scales
signals of higher and lower resolutions for display. Power: 10W
TPS-XVGA-BV . . . . . . . . . . . . . . . is an RGB Graphics Card w/balanced video allows computer video to be
displayed on touchpanel either fullscreen or in a window. Power:10W
TPS-5000 continued on next page
19
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S
TPS-5000 – Isys™ 15” Tilt Touchpanel
continued from previous page
ADDITIONAL OPTIONS:
TPS-XTXRF . . . . . . . . . . . . . . . . . . Wireless Module and Docking Station for wireless operation
TPS-IMW . . . . . . . . . . . . . . . . . . . . . Interface Module Wall-mounted unit that installs into a two-gang
electrical box. Same functions as the TPS-IMC, but with terminal block
connections
TPS-RFGWX . . . . . . . . . . . . . . . . . Two-way RF tranceiver
HBK-6000 . . . . . . . . . . . . . . . . . . . . Used with or without the rotating base, this sleekly designed hatchback
option is ideal for cable management. It neatly and completely covers
panel connections and includes wire strain relief. The hatchback also
ensures that unauthorized users cannot disconnect the panel.
SMK-6000 . . . . . . . . . . . . . . . . . . . . This handy accessory for the TPS-6000,TPS-5000 & TPS-4500 tilt
models reduces the chance of theft while improving viewing
convenience. The rotating base mounts on the desktop, in a lectern or
conference table and accommodates surfaces of varying thickness. It
rotates 330 degrees and compensates for varying surface angles.The
rotating base kit includes the Hatchback.
20
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
TPS-5000L – Isys™12” Lectern/
Wall Mounted Touchpanel
There’s nothing in the world that compares with the award-winning Isys touchpanel
control system.The wall or lectern mounted TPS-5000LB is a state-of-the-art Internet
control powerhouse that’s ideal for auditoriums or command centers, and the ultimate for
high-tech kitchens or bedrooms. Its 12"diagonal touch-sensitive LCD display produces
a gorgeous high resolution picture for both graphics and video, either full screen or in a
window.The unique modular design allows users to upgrade capabilities simply by
installing expansion cards for RGB graphics, video or Internet communications. Standard
audio capabilities include built-in microphone, two stereo speakers, amplifier, mixer and
the ability to play stored WAV files. And the TPS-5000LB runs end-to-end on worldwide
standard IP Internet Protocol and operates at 10/100 Ethernet.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 12" / 30.5cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 800x600 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal enclosure with injection-molded plastic faceplate in black
Connectors
Audio Input . . . . . . . . . . . . . . . . . . 6-pin RJ11
Microphone Output. . . . . . . . . . . 3-pin Terminal block line level balanced
RS-232 . . . . . . . . . . . . . . . . . . . . . . 6-pin RJ11
RGBHV . . . . . . . . . . . . . . . . . . . . . . BNCx5, supplied by optional TPS-XVGAL card
Net . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin Terminal block
Video . . . . . . . . . . . . . . . . . . . . . . . BNCx2 + terminal block, supplied by TPS-VIDL card
LAN. . . . . . . . . . . . . . . . . . . . . . . . . 8-pin RJ45, supplied by TPS-ENETL card
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in microphone (AGC or fixed gain mode), balanced line level input
and output, power amplifier (2W per channel), audio mixer, two stereo
speakers, and WAV file capability
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 4MB internal flash memory, upgradeable to 32MB with plug-in memory
modules (TPS-MEM32MB, TPS-MEM16MB) plus 8MB of DRAM
Power Requirements . . . . . . . . . . . . . . 20W, 0.8A (w/o expansion cards)
Dimensions (HxWxD) . . . . . . . . . . . . . 11.0" (28.1cm) x 13.4" (34.1cm) x 2.7" (6.9cm) with faceplate
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9lb (2.7Kg) with faceplate (w/o expansion cards)
EXPANSION CARD OPTIONS:
TPS-ENETL . . . . . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet Card (8-Pin RJ45) Ethernet module provides full/half
duplex TCP/IP and UDP/IP communication via Ethernet/LAN/WAN to
any Crestron IP device. Power: 4W
TPS-VIDL . . . . . . . . . . . . . . . . . . . . Video Module Card (BNCx2 and terminal block) Video input digitizer
allows NTSC or PAL video to be displayed on the touchpanel. Supports
both Composite and S-Video formats, for full screen or window display.
Power: 8W
TPS-XVGAL . . . . . . . . . . . . . . . . . . RGB Graphics Card (BNCx5) RGB interface card allows full screen or
window display of computer video up to 1280x1024. Supports noninterlaced computer sources at native resolution of 800x600, and scales
signals of higher and lower resolutions for display. Power: 10W
ADDITIONAL OPTIONS:
RMK-5000 . . . . . . . . . . . . . . . . . . . . Rack mount
BB-5000 . . . . . . . . . . . . . . . . . . . . . . Back box for wall mounting
MODEL OPTIONS:
All the features of the TPS-5000LB with the following exceptions:
TPS-5000LB . . . . . . . . . . . . . . . . . . Enclosure with black plastic faceplate
TPS-5000LW . . . . . . . . . . . . . . . . . Enclosure with white plastic faceplate
21
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
TPS-4500 – Isys™12” Tilt Touchpanel
There’s nothing in the world that compares with the award-winning Isys touchpanel
control system.The TPS-4500 tilt model is a sleek, state-of-the-art multimedia touchpanel
that offers great looks and high performance at an affordable price. Its 12"diagonal
touch-sensitive LCD display produces a gorgeous high resolution picture for both graphics
and video, either full screen or in a window.The unique modular design allows users to
display full-motion video simply by installing an expansion card. And upgrading to
wireless operation is as easy as inserting the 2-way RF wireless module.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 12" (30.5cm) diagonal
Screen Resolution . . . . . . . . . . . . . . . . 800x600 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Screen Tilt . . . . . . . . . . . . . . . . . . . . . . . Soft-Touch adjustable screen tilt, 30-80 degrees
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black injection-molded case
Connectors:
TPS-4500:
RS-232 . . . . . . . . . . . . . . . . . . . . . . 6-pin RJ11
Net/Video . . . . . . . . . . . . . . . . . . . 10-pin RJ45
TPS-4500IMC Interface Module . . . Outboard module providing expanded video/network connections
to the touchpanel system (included)
NTSC/PAL VIDEO . . . . . . . . . . . . . . BNCx2 or 6-pin Composite, plus Y/C, made active by optional TPS-VID card
NET . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin, for connection to devices in the Cresnet system
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-pin RJ45, for touchpanel connection, plus Composite and S-Video
input made active by optional TPS-VID card
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 4MB internal flash memory, upgradeable to 32MB with plug-in memory
modules (TPS-MEM32MB, TPS-MEM16MB) plus 8MB of DRAM
Power Requirements . . . . . . . . . . . . . . 20W, 0.8A (w/o expansion cards or wireless option)
Dimensions (HxWxD) . . . . . . . . . . . . . 11.9" (30.1cm) x 13.3" (33.7cm) x 10.6" (26.8cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6lb (3.5Kg)(w/o expansion cards or wireless option)
EXPANSION CARD OPTIONS:
TPS-VID . . . . . . . . . . . . . . . . . . . . . . Video Module Card (10-PinRJ45) Video input digitizer allows NTSC or
PAL video to be displayed on the touchpanel. Supports both Composite
and S-Video formats, for full screen or window display. Power: 8W
ADDITIONAL OPTIONS:
TPS-XTXRF . . . . . . . . . . . . . . . . . Wireless Module and Docking Station for wireless operation
TPS-4500IMW . . . . . . . . . . . . . . . . Interface Module Wall-mounted unit that installs into a one-gang
electrical box. Same functions as the TPS-4500IMC, but with terminal
block connections
TPS-RFGWX . . . . . . . . . . . . . . . . . Two-way RF tranceiver
HBK-6000 . . . . . . . . . . . . . . . . . . . . Used with or without the rotating base, this sleekly designed hatchback
option is ideal for cable management. It neatly and completely covers
panel connections and includes wire strain relief. The hatchback also
ensures that unauthorized users cannot disconnect the panel.
SMK-6000 . . . . . . . . . . . . . . . . . . . . This handy accessory for the TPS-6000,TPS-5000 & TPS-4500 tilt
models reduces the chance of theft while improving viewing
convenience. The rotating base mounts on the desktop, in a lectern or
conference table and accommodates surfaces of varying thickness. It
rotates 330 degrees and compensates for varying surface angles.The
rotating base kit includes the Hatchback.
22
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
TPS-4500L – Isys™12” Lectern/
Wall Mounted Touchpanel
There’s nothing in the world that compares with the award-winning Isys touchpanel
control system.The wall or lectern mounted TPS-4500LB is a state-of-the-art multimedia
touchpanel that offers great looks and high performance at an affordable price.
Its 12"diagonal touch-sensitive LCD display produces a gorgeous high resolution picture,
either full screen or in a window. And the unique modular design allows users to display
full-motion video simply by installing an expansion card.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 12" / 30.5cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 800x600 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Screen Tilt . . . . . . . . . . . . . . . . . . . . . . . Soft-Touch adjustable screen tilt, 30-80 degrees
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black injection-molded case
Connectors:
RS-232 . . . . . . . . . . . . . . . . . . . . . . 6-pin RJ11
NTSC/PAL VIDEO . . . . . . . . . . . . . . BNCx2 or 6-pin Composite, plus Y/C, made active by optional TPS-VID card
NET . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin, for connection to devices in the Cresnet system
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 4MB internal flash memory, upgradeable to 64MB with plug-in memory
modules (TPS-MEM64MB, TPS-MEM32MB, TPS-MEM16MB) plus 8MB of
DRAM, upgradeable to 32MB
Power Requirements . . . . . . . . . . . . . . 20W, 0.8A (w/o expansion cards)
Dimensions (HxWxD) . . . . . . . . . . . . . 11.0" (28.1cm) x 13.4" (34.1cm) x 2.7" (6.9cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9lb (2.7Kg)(w/o expansion cards)
EXPANSION CARD OPTIONS:
TPS-VIDL . . . . . . . . . . . . . . . . . . . . Video Module Card (BNCx2 and terminal block) Video input digitizer
allows NTSC or PAL video to be displayed on the touchpanel. Supports
both Composite and S-Video formats, for full screen or window display.
Power: 8W
ADDITIONAL OPTIONS:
RMK-5000 . . . . . . . . . . . . . . . . . . . . Rack mount
BB-5000 . . . . . . . . . . . . . . . . . . . . . . Back box for wall mounting
MODEL OPTIONS:
All the features of the TPS-4500LB with the following exceptions:
TPS-4500LB . . . . . . . . . . . . . . . . . . Enclosure with black plastic faceplate
TPS-4500LW . . . . . . . . . . . . . . . . . Enclosure with white plastic faceplate
23
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
TPS-3000 – Isys™ Tilt Touchpanel
The newest member of the award -winning Isys family, the TPS-3000 packs all the power
and performance of the world’s most advanced touchpanels into a compact, stylish tilt
model. TPS-3000 6.4” active matrix display, 640 x 480 resolution, 64,000 colors, 8 MB flash
and 8 MB DRAM. The TPS-3000 delivers the finest quality video and graphics available on
a screen of its size and features the 64,000-color Isys engine that allows all graphics to be
displayed with incredible brightness and depth.
The newest Isys panel also supports real-time video (standard) and can accommodate
balanced or unbalanced signals in S-Video or composite format.The TPS-3000’s audio
capabilities include stereo speakers with built-in volume control, microphone, and WAV
file sound capability. With eye-catching good looks, the TPS-3000 touchpanel is a living
symbol of Crestron ingenuity and innovation.
Touchscreen
DisplayType: . . . . . . . . . . . . . . . . . . . . . 6.4” active matrix color display with 640x480 resolution
16 bit non-palette graphics with color key video window capability
CPU: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MIPs Coldfire processor running ISYS generation firmware
Memory: . . . . . . . . . . . . . . . . . . . . . . . . 8Mbytes of Flash (7 MB for user display lists)
8Mbytes of DRAM
Video:. . . . . . . . . . . . . . . . . . . . . . . . . . . Composite/S-Video video input through TPS-IMC/IMW
Built in time-base correction so video and graphics are always stable.
Video can be displayed full screen or in a window
NTSC and PAL supported
Adjustments for brightness, contrast, hue, saturation available.
Audio:. . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced line level stereo input through TPS-IMC/IMW
Maximum input level = 2VRMS single ended, 4VRMS differential with
internal volume control and two speakers. Balanced line level
microphone with AGC output via TPS-IMC/IMW
Maximum output level = 1VRMS single ended, 2VRMS differential
Built in wave file & key click capability
Wave files are 8 bit 8KHz mono PCM type
Headphone: Mini-phone jack on back of unit
RS-232:. . . . . . . . . . . . . . . . . . . . . . . . . . RJ-11 connector for console, telestrator etc.
Cresnet . . . . . . . . . . . . . . . . . . . . . . . . . Via TPS-IMC/IMW
Operating temperature: . . . . . . . . . . . 5 to 45 deg C
Humidity: . . . . . . . . . . . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
ADDITIONAL OPTIONS:
HBK-3000 . . . . . . . . . . . . . . . . . . . . Used with or without the rotating base, this sleekly designed hatchback
option is ideal for cable management. It neatly and completely covers
panel connections and includes wire strain relief. The hatchback also
ensures that unauthorized users cannot disconnect the panel.
SMK-3000 . . . . . . . . . . . . . . . . . . . . This handy accessory for the TPS-3000 tilt model reduces
the chance of theft while improving viewing convenience. The rotating
base mounts on the desktop, in a lectern or conference table and
accommodates surfaces of varying thickness. It rotates 330 degrees
and compensates for varying surface angles.The rotating base kit
includes the Hatchback.
24
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
TPS-3000L – Isys ™ 6” Lectern/
Wall Mounted Touchpanel
This compact touchpanel mounts cleanly into any wall or lectern surface. It combines
many of the capabilities of the other members of the Isys family in a versatile, smaller size
with a 6” diagonal screen. Perfect for boardrooms and training rooms, and equally at
home, in the kitchen and entryway of a state-of-the-art home, the TPS-3000LB provides
the industry’s highest resolution, 640x480, in a compact panel. Standard capabilities
include video display,WAV sound file storage and playback, microphone, speakers and
built-in time base corrector to insure stable video and graphics
Touchscreen
DisplayType: . . . . . . . . . . . . . . . . . . . . . 6.4” active matrix color display with 640x480 resolution
16 bit non-palette graphics with color key video window capability
Light sensor can be used to auto-dim the backlight
CPU: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MIPs Coldfire processor running ISYS generation firmware
Memory: . . . . . . . . . . . . . . . . . . . . . . . . 8Mbytes of Flash (7 MB for user display lists)
8Mbytes of DRAM
Video:. . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced/single ended Composite/S-Video video input.
Balanced video uses 6 position mini-phoenix (same as TPS-5000L)
2 BNC inputs can be used for S-video or composite
Built in time-base correction so video and graphics are always stable
Video can be displayed full screen or in a window
NTSC and PAL supported
Adjustments for brightness, contrast, hue, saturation available
Audio:. . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced line level stereo input (6-position mini-phoenix)
Maximum input level = 2VRMS single ended, 4VRMS differential with
internal volume control and two speakers
Balanced line level microphone with AGC output (3 pos mini-phoenix)
Maximum output level = 1VRMS single ended, 2VRMS differential
Built in wave file & key click capability
Wave files are 8 bit 8KHz mono PCM type
RS-232:. . . . . . . . . . . . . . . . . . . . . . . . . . RJ-11 connector for console, telestrator etc.
Buttons: . . . . . . . . . . . . . . . . . . . . . . . . . 5 engraveable CNX-B12
Cresnet . . . . . . . . . . . . . . . . . . . . . . . . . 4 pos mini-phoenix
Operating temperature: . . . . . . . . . . . 5 to 45 deg C
Humidity: . . . . . . . . . . . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
ADDITIONAL OPTIONS:
RMK-TPS3000L . . . . . . . . . . . . . . Rack mount
BB-3000 . . . . . . . . . . . . . . . . . . . . . . Back box for wall mounting
MODEL OPTIONS:
TPS-3000LA . . . . . . . . . . . . . . . . . . Enclosure with almond plastic faceplate
TPS-3000LB . . . . . . . . . . . . . . . . . . Enclosure with black plastic faceplate
TPS-3000LW . . . . . . . . . . . . . . . . . Enclosure with white plastic faceplate
25
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
TPS-2000L – Isys ™ 5” Lectern/
Wall Mounted Touchpanel
The TPS-2000L sets new standards in touchpanel technology. It incorporates features
found only in our top-of-the-line Isys panels and adds ten easy-to-use pushbuttons, yet it’s
so cost effective, you can put one in every room.The 5” diagonal color display presents
crisp, clear graphics and full-motion video with a built-in time base corrector, while a light
sensor automatically brightens or dims the display with room light for easy viewing. And
its exclusive Virtual Digital Pan and Zoom lets you use your finger to pan across the video
picture and zoom for the best view, without moving the camera.The 2000’s audio
capabilities include WAV sound file storage and playback, a microphone, amplifier and
speakers, as well as adjustments for volume, bass and treble. Finally, it complements any
décor, with optional inlays for paint, wallpaper and designer metal finishes.
Touchscreen:
Display Type. . . . . . . . . . . . . . . . . . . Touch-sensitive active matrix color LCD
Screen Dimensions . . . . . . . . . . . . . 5”/12.7cm diagonal
Screen Resolution . . . . . . . . . . . . . . 320x234 pixels
Color . . . . . . . . . . . . . . . . . . . . . . . . . 16 Bit non-palette graphics
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal enclosure with injection-molded plastic faceplate and keys
in white
Connectors . . . . . . . . . . . . . . . . . . . . . . 4-position mini-phoenix for Cresnet, 8-position mini-phoenix for audio
and video
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced line level mono input, balanced line level microphone output,
and built-in WAV file capability (8KHz)
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced(CAT5) /unbalanced composite video input and built-in time
base correction.Video can be displayed either full screen or in a
window
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 2MB internal flash memory, 8MB of DRAM
CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63MIPs Coldfire processor running Isys generation firmware
Power Requirements . . . . . . . . . . . . . . 13W, 24VDC, 0.54A
ADDITIONAL OPTIONS:
BB-2000 . . . . . . . . . . . . . . . . . . . . . . Back box kit for wall mounting
PMK-2000L . . . . . . . . . . . . . . . . . . Pre-Construction Mount
MMK-2000L . . . . . . . . . . . . . . . . . . Mud mount kit
TMK-2000L . . . . . . . . . . . . . . . . . . Trim mount kit
WMKM-2000L . . . . . . . . . . . . . . . Wall mount kit - Mud
WMKT-2000L . . . . . . . . . . . . . . . . Wall mount kit - Trim
TPS-FP . . . . . . . . . . . . . . . . . . . . . . . . Designer Series faceplates and engraved buttons
TPS-WPK . . . . . . . . . . . . . . . . . . . . . Water Resistant Cover Kit
26
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L I N T E R FAC E S
New for 2003
CNX-DVP4 – Digital Video Processor
The CNX-DVP4 is a digital video-processor, touchpanel interface, and stand alone 2-Series
control processor that can display up to 4 real-time video/computer windows
simultaneously on a single high-resolution monitor, projector or plasma screen. Ideal for
presentations, distance learning, and command and control centers, the DVP4 combines a
unique set of features to deliver a complete presentation solution.
Incorporating 4 DVI-I inputs, the DVP4 has the capability to accept any combination of
4 analog RGB computer sources up to 1600 x 1200 resolution, or 4 DVI digital visual
interface digital computer sources up to 1280 x 1024 resolution.
Multiple video formats can be processed through the 8 BNC inputs on the DVP4. Any
combination of composite NTSC/PAL or S-Video (Y/C) sources can be fed to the unit
simultaneously.
The sum of the inputs creates a 12 input x 4 video window seamless matrix switch for the
ultimate in professional video switching. Combined with seamless switching, the DVP4
also incorporates digital transition effects - fades, reveals, and pans can be applied to
video windows with software definable timing for each event. Each video window can be
scaled and positioned in a virtually unlimited configuration. Graphics can be incorporated
in the foreground or background in combination with the windows, and with built-in
alpha channel support, corporate icons and dynamic text can be placed over the video
windows in a translucent format.
A DVI-I output provides the option of running analog RGB or DVI digital video to the
display of your choice.The output can be scaled for analog RGB non-interlaced resolutions
from 800 x 600 to 1600 x 1200 as well as interlaced HDTV format 1080i.The DVI digital
visual interface output can be scaled from 800 x 600 to 1280 x 1024 and supports HDTV
1080i as well.
When used in either analog RGB or DVI mode, all output resolutions support 4:3 and 16:9
aspect ratios to best match the display device.
By adding a touch sensitive overlay to the output display, the DVP4 transforms into a
Crestron touchpanel. It is compatible with overlays such as the Smart Matisse™, Elo™,
3M™ and even accepts Microsoft™ Serial Mouse pointing devices for control.Touchpanel
graphics, video window layouts, and effects, are all programmed using Crestron’s VTPRO-e
Microsoft Windows-based graphics development software.
Crestron’s breakthrough 2-Series control engine with the hot new 257 MIPS, 32-bit
Motorola ColdFire® processor and TYPE II complact flash memory slot is at the core of the
DVP4.The control engine allows the DVP4 to be used as a stand-alone master control
system running control logic to support any of Crestron’s network devices in the same
format as all the 2-Series control systems.The DVP4 is also capable of running in slave
mode so that it can be used with an existing 2-Series control system in a similar fashion to
a standard Isys™ touchpanel.
Four included RS-232 control ports can be programmed to control external devices such
as plasma screens, video conferencing codecs, or used as Touch-the-PC ports to allow the
user to touch through the computer window displayed onscreen and control any
Windows-based PC.To round out the package, a 10/100 Ethernet port with built-in Web
Server provides the ultimate in e-Control help desk functions and high speed
communications.
The DVP4 combines the latest in video processing technology with incredible graphic and
control features to provide a powerful solution for any application where high resolution
video and graphics are required.
DVP4 continued on next page
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
27
T O U C H PA N E L S
™
I S YS T O U C H PA N E L I N T E R FAC E S c o n t i n u e d
DVP4 continued from previous page
Switcher: . . . . . . . . . . . . . . . . . . . . . . . . Seamless - 12 Inputs x 4 Windows to One display output
Inputs:
Digital sampling: . . . . . . . . . . . . . 24 bit, 8 bits per color.
General Input selection: . . . . . . . Up to 4 RGB computers and 4 S-Video (or 8 Composite) video, any
combination of up to 4 sources displayed simultaneously on the
output.
RGB Input: . . . . . . . . . . . . . . . . . . . . . . . 4 DVI-I/Analog connectors for RGB (RGBHV, RGBS and RGsB
supported)/LVDS Digital
Non-interlaced analog sources: 640 x 480 (60-85Hz),
800 x 600 (60-85Hz)
832 x 624 (60-85Hz),
848 x 480 (60-85Hz)
852 x 480 (60-85Hz),
1024 x 768 (60-85Hz)
1152 x 864 (60-85Hz),
1280 x 768 (60-85Hz)
1280 x 960 (60-85Hz),
1280 x 1024 (60-85Hz)
1360 x 765 (60-85Hz),
1365 x 768 (60-85Hz)
1365 x 1024 (60-85Hz),
1600 x 1200 (60-75Hz)
Interlaced analog sources: . . . . . 1080i (1920 x 1080) (30Hz)
Minimum/maximum levels: . . . .5V to 1.5V p-p with built-in DC restoration.
Impedance: . . . . . . . . . . . . . . . . . . 75 ohms
Input sync type: . . . . . . . . . . . . . . Autodetect RGBHV, RGBS, RGsB
Input level: . . . . . . . . . . . . . . . . . . 3.0V to 5.0V p-p
Input impedance: . . . . . . . . . . . . 1k ohms
Max input voltage: . . . . . . . . . . . 5.0V p-p
DVI digital sources:. . . . . . . . . . . . 640 x 480 (60-85Hz),
800 x 600 (60-85Hz)
832 x 624 (60-85Hz),
848 x 480 (60-85Hz)
852 x 480 (60-85Hz),
1024 x 768 (60-85Hz)
1152 x 864 (60-85Hz),
1280 x 768 (60-85Hz)
1280 x 960 (60Hz),
1280 x 1024 (60Hz)
Video input: . . . . . . . . . . . . . . . . . . . . . 8 BNC connectors shared for 8 NTSC/PAL Composite sources or 4
S-Video (Y/C) sources - mix and match any combination using the 8
BNC inputs.
Minimum/maximum levels: . . . .5V to 1.5V p-p with built-in DC restoration
Impedance: . . . . . . . . . . . . . . . . . . 75 ohms
TBC: . . . . . . . . . . . . . . . . . . . . . . . . Internal TBC with Genlock to any active external source (software
definable).
Outputs:
Color Depth: . . . . . . . . . . . . . . . . . 32-Bit/pixel 24-bit color + 8-bit alpha channel, 24-Bit Video/Graphics
Output interface: . . . . . . . . . . . . 1 DVI-I connector for output display of analog RGB /LVDS Digital Video
Supported Aspect Ratios with any output resolution listed below:
4:3, 16:9
Output resolutions: . . . . . . . . . . . Non-Interlaced analog RGB/DVI output:
800 x 600 (60-85Hz)
1024 x 768 (60-85Hz)
720p (1280 x720, 60Hz)
1280 x 1024 (60-85Hz)
1365 x 768 (60-85Hz)
1600 x 1200 (60Hz)
Interlaced analog
RGB/DVI output:. . . . . . . . . . . . . . 1080i HDTV (1920 x 1080
Output Sync:
Output type: . . . . . . . . . . . . . . . RGBHV, RGBS
Output level: . . . . . . . . . . . . . . . TTL, 5.0V p-p
Polarity: . . . . . . . . . . . . . . . . . . . Composite sync, negative
H/V: . . . . . . . . . . . . . . . . . . . . . . . User-selectable
Effects: . . . . . . . . . . . . . . . . . . . . . . All video windows support fades, reveals, and pans with user definable
timing. Text, buttons, and graphics can be overlaid on video/computer
windows.
Processor:
CPU: . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed: . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory: . . . . . . . . . . . . . . . . . . . . . . . 4 MB FLASH for Program File, 32MB RAM, 32 MB Compact Flash Card
(Included) for Graphics/Webserver - Expandable up to 4GB (accessible
on rear panel - accepts standard Type II compact flash or IBM
Microdrive).
DVP4 continued on next page
28
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L I N T E R FAC E S c o n t i n u e d
DVP4 continued from previous page
Communication: . . . . . . . . . . . . . . . . . 4 RS-232 ports (DB-9) for interfacing with PC Mouse Control,
Telestrator or AV devices
1 RS-232 port for Programming/Console
1 RS-232 port for external pointing device/
user interface.
User Interface: . . . . . . . . . . . . . . . . . . . Accepts a variety of pointing devices, including a Microsoft™compatible serial mouse, and touch-sensitive screen overlays from
other manufacturers like SMART Matisse™, 3M™ and Elo
TouchSystems™
Cresnet port: . . . . . . . . . . . . . . . . . . . . Operates in Master Mode to support Cresnet Peripherals when used as
a stand-alone control system.
Operates in slave mode when used with any
2-Series control system.
Ethernet: . . . . . . . . . . . . . . . . . . . . . . . . RJ45 for auto-sensing 10/100 BaseT Ethernet, dynamic/static IP, and full
duplex TCP/IP, UDP/IP, Built-In web server
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V from Cresnet, 50W power factor (requires external CNPWS-75 not
included).
Environmental:
Operating temperature: . . . . . . . 5 to 45°C
Humidity: . . . . . . . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
Enclosure: . . . . . . . . . . . . . . . . . . . Black Metal
Dimensions (HxWxD) . . . . . . . . . . . . . 3.5” (8.9cm) x 19” (48.3cm) x 11.5” (29.1cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 lbs. (3.6 kg)
Included Connectors:. . . . . . . . . . . . . . DVI/VGA adapter kit Contains 5 adapters which convert DVI inputs to
15-pin VGA analog inputs.
INCLUDED ACCESSORIES
DVI/VGA ADAPTER KIT . . . . . Contains 5 adapters which convert DVI inputs to 15-pin VGA
analog inputs (Included)
29
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L I N T E R FAC E S c o n t i n u e d
TPS-TPI – Isys™ Touchpanel Interface
There’s nothing in the world that compares with the award-winning Isys touchpanel
control system. Like the other models in the Isys family, the TPS-TPI is a complete control
system offering a host of sophisticated capabilities. Designed without a display, it turns
any plasma monitor, LCD display or large video projector and screen into an Isys system
that handles high-resolution graphics and video. It can be controlled by a variety of
pointing devices, including a serial mouse, graphics tablet or touch-sensitive overlay,
which allows any size screen to function as a touchpanel.The TPS-TPI is ideal for
classrooms, command and control centers, stage and show presentations, interactive
kiosks, boardrooms and home theater systems.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Connectors:
Audio Input . . . . . . . . . . . . . . . . . . RJ11
Audio Output . . . . . . . . . . . . . . . . Mini phone jack
RS-232 . . . . . . . . . . . . . . . . . . . . . . RJ11
RGBHV . . . . . . . . . . . . . . . . . . . . . . BNCx5, supplied by optional TPS-XVGAL card
Net . . . . . . . . . . . . . . . . . . . . . . . . . Terminal block
Video . . . . . . . . . . . . . . . . . . . . . . . BNCx2 + terminal block, supplied by optional TPS-VIDL card
Analog Video Output. . . . . . . . . . DB15 high density
LAN. . . . . . . . . . . . . . . . . . . . . . . . . RJ45, supplied by optional TPS-ENETL card
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Line level input and output, power amplifier (2W per channel), audio
mixer, two stereo speakers and WAV file capability
User Interface . . . . . . . . . . . . . . . . . . . . Accepts a variety of pointing devices, including a Microsoft®-compatible
serial mouse, Crestron SmartPresenter™, graphics tablets, and touchsensitive screen overlays. Check with Crestron for a current list of
software drivers
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 8MB internal flash memory, upgradeable to 32MB with plug-in memory
modules (TPS-MEM32MB, TPS-MEM16MB) plus 8MB of DRAM
Power Requirements . . . . . . . . . . . . . . 10W
Dimensions (HxWxD) . . . . . . . . . . . . . 9.5" (24.0cm) x 15.1" (38.4cm) x 2.9" (7.4cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9lb (1.8Kg)
EXPANSION CARD OPTIONS:
TPS-ENETL 10/100 BaseT Ethernet Card . . (RJ45) Ethernet module provides full/half duplex TCP/IP and UDP/IP
communication via Ethernet/LAN/WAN to any Crestron IP device
Power: 4W
TPS-VIDL Video Module Card . . . (BNCx2 and terminal block) Video input digitizer allows NTSC or PAL
video to be displayed. Supports both Composite and S-Video formats,
for full screen or window display. Power: 8W
TPS-XVGAL RGB Graphics Card . (BNCx5) RGB interface card allows full screen or window display of
computer video up to 1600x1200. Supports non-interlaced
computer sources at native resolution of 1024x768,
and scales signals of higher and lower resolutions for
display. Power: 10W
30
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS T O U C H PA N E L C O N T R O L S YS T E M AC C E S S O R I E S
TPS-FP – Designer Series Faceplates
for TPS-2000L
The Isys™ TPS-2000L touchpanel can be fully customized with a wide variety of designer
finishes, and can also accommodate painting, wallpapering and custom laser engraving.
The TPS-FP Designer Series faceplates replace the standard white faceplates and install
easily without tools. Available in almond, black, white, black chrome, brushed gold,
polished black, polished brass, polished gold and stainless steel, they allow the TPS-2000L
to enhance any residential or commercial décor.
ENGRAVING AVAILABLE ON BUTTONS ONLY
TPS-FP-BLK/CHR . . . . . . . . . . . . Black Chrome with black trim and buttons
TPS-FP-BR/GLD . . . . . . . . . . . . . . Brushed Gold with black trim and buttons
TPS-FP-P/BLK . . . . . . . . . . . . . . . . Polished Black with black trim and buttons
TPS-FP-P/BRASS . . . . . . . . . . . . Polished Brass with black trim and buttons
TPS-FP-P/GLD . . . . . . . . . . . . . . . Polished Gold with black trim and buttons
TPS-FP-S/STEEL . . . . . . . . . . . . . Stainless Steel with black trim and buttons
TPS-FPINA . . . . . . . . . . . . . . . . . . . Primed faceplate to cover with paint or wallpaper, with almond trim
and buttons
TPS-FPINB . . . . . . . . . . . . . . . . . . . Primed faceplate to cover with paint or wallpaper, with black trim
and buttons
TPS-FPINW . . . . . . . . . . . . . . . . . . . Primed faceplate to cover with paint or wallpaper, with white trim
and buttons
ENGRAVING AVAILABLE ON FACEPLATE AND BUTTONS
TPS-FPA . . . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
TPS-FPB . . . . . . . . . . . . . . . . . . . . . . Black faceplate and buttons
TPS-FPW . . . . . . . . . . . . . . . . . . . . . White faceplate and buttons
New for 2003
TPS-WPK – Water Resistant Cover Kit
for TPS-2000L
These covers are great for protecting the Isys™ TPS-2000L touchpanel under damp or
splashy conditions, such as basements, pools, boathouses, bathrooms, laundries and
garages. Each kit contains four urethane covers, which install easily without tools over the
faceplate of the touchpanel.They effectively prevent liquids and other airborne materials
from settling directly onto the panel, while allowing regular usage of the unit.These covers
make the touchpanels water-resistant not waterproof, and therefore are not
recommended for use under extreme outdoor weather conditions.
Kit Contents . . . . . . . . . . . . . . . . . . . . . Four flexible urethane covers
31
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
TPS-IMC – Isys™Interface Module
The TPS-IMC is designed specifically to serve as an interface module for the Crestron TPS-5000
and TPS-6000 tilt touchpanels.The TPS-IMC is included with the TPS-5000 and TPS-6000.
I/O Ports:
NTSC/PAL VIDEO. . . . . . . . . . . . . . BNCx2 plus terminal block to accept balanced video.These three ports
are made active by the purchase and installation of TPS-VID, composite
and S-video for TV video card
NET . . . . . . . . . . . . . . . . . . . . . . . . . Terminal block four-pin connector is used to connect to other four-wire
devices in the Cresnet system
AUDIO . . . . . . . . . . . . . . . . . . . . . . 8-position RJ45 mates with touchpanel to provide audio input
and mic out to amplifiers
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-position RJ45 mates with touchpanel to provide network
connection to panel and makes available composite and S-video
input for TV video card
MIC OUT. . . . . . . . . . . . . . . . . . . . . Port mates with supplied 3-pin connector to produce line level
differential output
AUDIO INPUT . . . . . . . . . . . . . . . . Port mates with supplied 6-pin connector to accept
differential or single ended audio signal
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened top panel
Dimensions (HxWxD) . . . . . . . . . . . . . 2.00" (5.08cm) x 5.33" (13.53cm) x 1.24" (3.15cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.59lb (0.27Kg)
New for 2003
TPS-IMC-BV – Isys ™ Interface Module with
Balanced Video
The TPS-IMC-BV is an optional interface module for TPS-6000 and TPS-5000 tilt
touchpanels which have the RGB interface card with balanced video,TPS-XVGA-BV,
installed.This interface module provides network, audio and balanced video connections
for the touchpanel, while eliminating a clutter of cables into the touchpanel itself.
The TPS-IMC-BV is included wwith the TPS-XVGA-BV card
I/O Ports:
RGB INPUT. . . . . . . . . . . . . . . . . . . . . . . DB15F connects to the PC video port and is functional with the
installation of the TPS-XVGA-BV RGB computer interface card
RGB OUTPUT . . . . . . . . . . . . . . . . . . . . . 10-pin RJ45 port connects to the touchpanel and is made active with
the installation of the TPS-XVGA-BV RGB computer interface card
NTSC/PAL VIDEO . . . . . . . . . . . . . . . BNCx2 (unbalanced video) plus 8-pin RJ45 connector (balanced video)
NET . . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin connector
NET/VIDEO . . . . . . . . . . . . . . . . . . . . 10-position RJ45 provides network connection to the touchpanel and
provides composite and S-video input for the TPS-VID video card
AUDIO. . . . . . . . . . . . . . . . . . . . . . . . 8-position RJ45 connects to the touchpanel and provides audio input
and microphone out from the touchpanel to audio amplifiers (required
triamese cable included)
AUDIO INPUT . . . . . . . . . . . . . . . . . . 8-pin RJ45 for use with CNX-BIPAD8
AUDIO INPUT . . . . . . . . . . . . . . . . . . 6-pin connector accepts differential or single ended audio input
MIC OUTPUT . . . . . . . . . . . . . . . . . . 3-pin connector produces line level differential output
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened top panel
Dimensions (HxWxD) . . . . . . . . . . . . . 3.20” (8.13cm) x 7.70” (19.56cm) x 1.25” (3.18cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.15lb (.52kg)
32
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
TPS-IMW – Isys ™ Wall-Mounted Interface Module
The TPS-IMW is a wall-mounted interface module for the TPS-5000 and TPS-6000 tilt
touchpanels that mounts into a 2-gang electrical box with a recommended depth of 2.5".
I/O Ports:
NTSC/PAL VIDEO. . . . . . . . . . . . . . Terminal block only for balanced & Unbalanced video
NET . . . . . . . . . . . . . . . . . . . . . . . . . four-pin screw terminal
AUDIO . . . . . . . . . . . . . . . . . . . . . . 8-position RJ45 mates with touchpanel to provide audio input
and mic out to amplifiers
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-position RJ45 mates with touchpanel to provide network
connection to panel and makes available composite and S-video
input for TV video card.
MIC OUT. . . . . . . . . . . . . . . . . . . . . Port mates with supplied 3-pin connector to produce line level
differential output
AUDIO INPUT . . . . . . . . . . . . . . . . Port mates with supplied 6-pin connector to accept
differential or single ended audio signal
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened top panel
Dimensions (HxWxD) . . . . . . . . . . . . . 4.11" (10.44cm) x 3.5" (8.89cm) x 1.51" (3.82cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.48lb (0.22Kg)
TPS-4500IMC – Isys™ Interface Module
The TPS-4500IMC is designed specifically to serve as an interface module for the Crestron
TPS-4500 tilt touchpanel.The TPS-4500IMC is included with the TPS-4500.
I/O Ports:
NTSC/PAL VIDEO. . . . . . . . . . . . . . BNCx2 plus terminal block.These three ports are made active by the
purchase and installation of TPS-VID, composite and S-video for TV
video card.
NET . . . . . . . . . . . . . . . . . . . . . . . . . 4-Pin screw terminal
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-position RJ45 mates with touchpanel to provide network
connection to panel and makes available composite and S-video
input for TV video card.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened top panel
Dimensions(HxWxD) . . . . . . . . . . . . . . . 2.00" (5.08cm) x 5.33" (13.53cm) x 1.24" (3.15cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.59lb (0.27Kg)
TPS-4500IMW – Isys™ Wall-Mounted
Interface Module
The TPS-4500IMW is a wall-mounted interface module for the TPS-4500 tilt touchpanel
that mounts into a 1-gang electrical box with a recommended depth of 2.5".
I/O Ports:
NTSC/PAL VIDEO. . . . . . . . . . . . . . Terminal block only
NET . . . . . . . . . . . . . . . . . . . . . . . . . 4-Pin screw terminal
NET/VIDEO. . . . . . . . . . . . . . . . . . . 10-position RJ45 mates with touchpanel to provide network
connection to panel and makes available composite and S-video
input for TV video card.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened top panel
Dimensions (HxWxD) (without bezel) . . . 4.27“ (10.85cm) x 2.5" (6.36cm) x 1.49" (3.77cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.51lb (0.23Kg)
ADDITIONAL OPTIONS:
The TPS-4500IMW can be used for NET/VIDEO connection to a TPS-5000 or TPS-6000 if audio on
TPS panel is not being used.
33
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
TPS-MEM32MB – 32 MB Isys™Memory
Expansion Module
The TPS-MEM32MB is a plug-in flash memory module for both TPS-4500/5000/6000/ tilt
and wall/lectern versions of the Isys touchpanel control system, which increases memory
capacity for displaying icons and high resolution graphics, plus storing and playing WAV
files. These models can accept one module as a replacement for the existing flash module.
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 32MB
TPS-MEM16MB – 16 MB Isys™Memory
Expansion Module
The TPS-MEM16MB is a plug-in flash memory module for both TPS-4500/5000/6000/ tilt
and wall/lectern versions of the Isys touchpanel control system, which increases memory
capacity for displaying icons and high resolution graphics, plus storing and playing WAV
files. These models can accept one module as a replacement for the existing flash module.
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 16MB
TPS-ENET – Isys™Ethernet Card for Tilt Models
The TPS-ENET 10/100 BaseT Ethernet card is an optional feature designed for Crestron’s
Isys™ TPS-5000 and TPS-6000 tilt touchpanels. Installed into a specific expansion slot on
the touchpanel motherboard, 40-pin connector attaches directly to the motherboard.The
card provides communication via Ethernet/local area network (LAN) and wide area
network (WAN) via IP.TPS-ENET supports both static and dynamic IP processing.
Connectors . . . . . . . . . . . . . . . . . . . . . . 40-pin connector attaches directly to the motherboard with two
supplied mounting screws (external connection via Isys 8-position
RJ45 port
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . .4W (0.167A @ 24 VDC)
Network Type . . . . . . . . . . . . . . . . . . . . 10BaseT/100BaseT, half or full duplex
Protocols . . . . . . . . . . . . . . . . . . . . . . . . TCP/IP, UDP/IP, ICMP (Ping), & CIP
Dimensions (HxWxD) . . . . . . . . . . . . . 0.63" (1.60cm) x 1.13" (2.88cm) x 5.75" (14.61cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.80 oz (0.02Kg)
TPS-ENETL – Isys™Ethernet Card for Lectern/Wall
Mounted Models
The TPS-ENETL 10/100 BaseT Ethernet card is an optional feature designed for Crestron’s
Isys™ TPS-5000L and TPS-6000L tilt touchpanels and TPS-TPI touchpanel interface.
Installed into a specific expansion slot on the touchpanel motherboard, 40-pin connector
attaches directly to the motherboard.The card provides communication via Ethernet/local
area network (LAN) and wide area network (WAN) via IP. TPS-ENETL supports both static
and dynamic IP processing.
Connectors . . . . . . . . . . . . . . . . . . . . . . 40-pin connector attaches directly to the motherboard and provides
an 8-position RJ45 port
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . .4W (0.167A @ 24 VDC)
Network Type . . . . . . . . . . . . . . . . . . . . 10BaseT/100BaseT, half or full duplex
Protocols . . . . . . . . . . . . . . . . . . . . . . . . TCP/IP, UDP/IP, ICMP (Ping), & CIP
Dimensions (HxWxD) . . . . . . . . . . . . . 1.02" (2.60cm) x 1.43" (3.62cm) x 5.85" (14.86cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.20 oz (0.03Kg)
34
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
TPS-VID – Isys ™ Video Card for Tilt Models
The TPS-VID video card is an optional feature designed for Crestron’s Isys™ TPS-5000,
TPS-6000 and TPS-4500 tilt touchpanels.The card is a video digitizer that allows NTSC,
PAL, or S-video to be displayed on the touchpanel.
Connection . . . . . . . . . . . . . . . . . . . . . . 60-pin connector attaches the card directly to the motherboard into a
specific expansion slot on the touchpanel and is secured with four
supplied mounting screws
Video Types . . . . . . . . . . . . . . . . . . . . . . NTSC or PAL
Video Format . . . . . . . . . . . . . . . . . . . . Composite or S-Video
Video Format Detection . . . . . . . . . . . Within 2 seconds
Color Depth. . . . . . . . . . . . . . . . . . . . . . 256,000 colors
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . 8W (0.333A @ 24 VDC)
Dimensions (HxWxD) . . . . . . . . . . . . . 0.70" (1.78cm) x 2.10" (5.33cm) x 5.93" (15.10cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.60 oz (0.05Kg)
New for 2003
TPS-VID-2 – Dual Video Card for Isys ™ Tilt Models
The TPS-VID-2 is a dual window version of TPS-VID video card and inserts into any new or
existing TPS-6000,TPS-5000 or TPS-4500 panel. The TPS-VID-2 capabilities include: display
of two real-time video windows simultaneously, scale video at full screen or window to
any size, display picture-in-picture, and individually place windows anywhere on the
screen. When adding a TPS-XVGA card to a TPS-6000 or TPS-5000 with a TPS-VID-2 card,
capabilities include: display of three sources on-screen simultaneously, ability to overlay
video on computer graphics as well as overlay computer on video windows. Ideal for
videoconferencing applications (far end or local site).
Connection . . . . . . . . . . . . . . . . . . . . . . Unit can auto-detect NTSC or PAL video, and can detect composite or
S-video if only one input is active. Connections for a single video source
would be identical to that of the TPS-VID. For two sources the chroma
( C ) connections would be used for one composite signal and the
COMP/Y for the other.
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . 12Watt
Tools Support:. . . . . . . . . . . . . . . . . . . . VT-PROe will need to generate video objects that have a source
selection capability.
TPS-VIDL – Isys ™ Video Card for Lectern/
Wall Mounted Models
The TPS-VIDL video card is a video digitizer that allows NTSC, PAL, or S-Video to be
displayed on a touchpanel. It is an optional feature designed for Crestron’s wall/lectern
mounted TPS-5000L,TPS-6000L and TPS-4500L touchpanels and the TPS-TPI touchpanel
interface.The TPS-VIDL card is designed to be installed into a specific expansion slot in the
touchpanel or interface.
Connector Specifications (Port,Type, Signal):
Touchpanel Interface. . . . . . . . . . 60-pin connector, various signals
C+. . . . . . . . . . . . . . . . . . . . . . . . . . 1 pin of 6-pin connector, 3.5mm, Bal. S-Video chrominance input
C- . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pin of 6-pin connector, 3.5mm, Bal. S-Video chrominance return
C S. . . . . . . . . . . . . . . . . . . . . . . . . . 1 pin of 6-pin connector, 3.5mm, Bal. S-Video chrominance shield
Y+. . . . . . . . . . . . . . . . . . . . . . . . . . 1 pin of 6-pin connector,3.5mm,Bal. S-Video luminance input
or composite input
Y- . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pin of 6-pin connector, 3.5mm, Bal. S-Video luminance return
Y S. . . . . . . . . . . . . . . . . . . . . . . . . . 1 pin of 6-pin connector, 3.5mm, Bal. S-Video luminance shield
C . . . . . . . . . . . . . . . . . . . . . . . . . . . BNC, S-Video chrominance (color information) input
35
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
TPS-VIDL – Isys ™ Video Card for Lectern/
Wall Mounted Models
continued from previous page
COMP/Y . . . . . . . . . . . . . . . . . . . . . . . . . BNC, Composite video or S-Video luminance (brightness) input
Video Types . . . . . . . . . . . . . . . . . . . . . . NTSC or PAL
Video Format . . . . . . . . . . . . . . . . . . . . Composite or S-Video
Video Format Detection . . . . . . . . . . . Within 2 seconds
Color Depth. . . . . . . . . . . . . . . . . . . . . . 256,000 colors
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . 8W (.0333A @ 24VDC)
Dimensions (HxWxD) . . . . . . . . . . . . . 1.16" (2.95cm) x 2.63" (6.67cm) x 5.00" (12.70cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.20 oz (0.09Kg)
New for 2003
TPS-XT XRF – Wireless Module and Docking
Station for Isys ™ Tilt Models
The TPS-XTXRF is an optional 2-way radio frequency (RF) transceiver module designed for
Crestron Isys™ tilt touchpanels.When equipped with the TPS-XTXRF, the touchpanel is
converted to a portable, long range, RF 2-way wireless transceiver that communicates
through an RF gateway/transceiver (TPS-RFGWX, sold separately) to the Cresnet system.
The 2-way communications provides the control of the devices connected to the Crestron
System and provide dynamic onscreen feedback for real-time confirmation of commands.
Communications . . . . . . . . . . . . . . . . . . 2-way spread spectrum radio frequency (RF), 2.4 GHz
(2400 to 2483 MHz)
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 3’ minimum to 100-200’ maximum indoor/1000’ outdoor
(obtain additional range by using multiple TPS-RFGWX units distributed
throughout the installation)
Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . Injection molded with silk-screened labels
Dimensions (HxWxD) . . . . . . . . . . . . . . 3.27” (8.31cm) base or 7.78” (19.76cm) maximum with antenna x 9.85”
(25.02cm) x 8.41” (21.36cm)
Included . . . . . . . . . . . . . . . . . . . . . . . . . TPS-XBTP high performance rechargeable battery pack,TPS-XDS
docking station/recharger, PW-2420RU external power pack for
powering docking station/touchpanel while trickle-charging the
TPS-XBTP.
New for 2003
TPS-XDS – Docking Station/
Recharger for Isys ™ Tilt Models
The TPS-XDS is a microprocessor-based docking station designed to charge the TPS-XBTP
rechargeable battery pack and/or provide operating power for an Isys™ tilt model
touchpanel equipped with the optional TPS-XTXRF 2-way RF transceiver module.When
docked in the TPS-XDS, the TPS-XBTP installed in the touchpanel is continually tricklecharged until fully charged to maintain optimum performance. Power to the TPS-XDS is
supplied by the provided external power pack (PW-2420RU.)
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal & molded plastic with silk-screened labels
Dimensions (HxWxD) . . . . . . . . . . . . . 1.26” (3.19cm) x 10.89” (27.67cm) x 5.37” (13.64cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.13lb (0.51 kg)
Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC Power
Indicators. . . . . . . . . . . . . . . . . . . . . . . . Green PWR LED indicates power supplied to the unit, Red CHG LED
indicates touchpanel with wireless module and battery installed and
charging
Input Power . . . . . . . . . . . . . . . . . . . . . 120VAC, 60Hz or 240VAC, 50Hz
Output Power . . . . . . . . . . . . . . . . . . . . 24VDC, 2A minimum, regulated
36
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
New for 2003
TPS-RFGWX – 2-Way RF Transceiver/Wireless
Gateway for Isys ™ Tilt Models
The TPS-RFGWX is a 2-way radio frequency (RF) transceiver/gateway that communicates
with a Crestron Isys™ touchpanel equipped with the optional TPS-XTXRF 2-way RF
transceiver module.The TPS-RFGWX receives RF signals from one or more touchpanels
and translates the signals into commands for transmission over the Cresnet system.
Feedback signals from the Cresnet system are transmitted from the TPS-RFGWX to the
touchpanel(s) for real-time confirmation of commands. Up to 15 touchpanels can
communicate with one TPS-RFGWX and, if more touchpanels are needed, more
TPS-RFGWX units may be added to the system.
Communications . . . . . . . . . . . . . . . . . 2-way spread spectrum radio frequency (RF), 2.4 GHz (2400 to 2483
MHz), transmit power 100mW
Range. . . . . . . . . . . . . . . . . . . . . . . . . . . 3’ minimum to 100-200’ maximum indoor/1000’ outdoor (obtain
additional range by using multiple TPS-RFGWX units distributed
throughout the installation)
Ports:
NET (Modular) . . . . . . . . . . . . . . . . . . . Two 6-pin, 6-position RJ11 modular jacks to connect the TPS-RFGWX to
modular devices in the Cresnet system
NET (4-Wire) . . . . . . . . . . . . . . . . . . . . . 4-pin Cresnet connector to connect the TPS-RFGWX to other 4-wire
devices in the Cresnet system
Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green LED illuminates when Cresnet power is supplied to the
TPS-RFGWX
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED illuminates when communication with the Cresnet system
and the TPS-RFGWX is established
SIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red LED illuminates when the TPS-RFGWX is in RF communication with
a touchpanel
Rx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red LED illuminates when an RF command is received from a
touchpanel
Tx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red LED illuminates when feedback is transmitted via RF to a
touchpanel
Power Requirements . . . . . . . . . . . . . . 3W, 24VDC, 0.125A, network
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened labels
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70” (4.32cm) x 7.07” (17.95cm) x 6.32” (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.38 lb (0.93 kg)
TPS-XBTP – Battery Pack for Isys™
The TPS-XBTP is a high-performance rechargeable battery pack which supplies operating
power to an Isys™ panel equipped with the optional TPS-XTXRF 2-way RF transceiver
module. Installation of the battery pack into the touchpanel offers freedom to roam
without being confined to a stationary power source.When the touchpanel is docked on
the TPS-XDS docking station, the TPS-XBTP is being charged.
Output Voltage . . . . . . . . . . . . . . . . . . . 20VDC, nominal
Composition . . . . . . . . . . . . . . . . . . . . . Nickel-metal hydride (Ni-MH)
Operating Time. . . . . . . . . . . . . . . . . . . Approximately 2.5 hours with typical use, 8-10 hours in standby mode
(for new unit with full charge)
Estimated Life . . . . . . . . . . . . . . . . . . . . 500 charging/discharging cycles
Operating Temperature. . . . . . . . . . . . 32 to 104 degrees F (0 to 40 degrees C) optimal
Storage Temperature . . . . . . . . . . . . . . -4 to 113 degrees F (-20 to 45 degrees C) optimal
Dimensions (HxWxD) . . . . . . . . . . . . . 1.40” (3.56cm) x 7.14” (18.14cm) x 5.00” (12.70cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 lb (1.00 kg)
37
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
New for 2003
TPS-XBC – Battery Charger for TPS-XBTP
The TPS-XBC is an external battery charger that allows charging of a single TPX-XBTP
rechargeable battery pack without the use of the Isys™ touchpanel.This makes it possible
to keep spare batteries always charged and ready for use.
TPS-XVGA – RGB Graphics Card for Isys™
Tilt Mounted Models
The TPS-XVGA RGB computer interface card is an optional feature designed for Crestron's
Isys™ TPS-5000 and TPS-6000, which allows personal computer (PC) video to be displayed
on the touchpanel full screen or in a window. Non-interlaced input video resolutions of up
to 1600x1200 are supported by scaling up or down to the native resolution of the
touchpanel. Requires TPS-IMC interface module (included).
Connectors . . . . . . . . . . . . . . . . . . . . . . 60-pin connector which attaches the card directly to the motherboard,
standard DB15HD mini-computer video connector.
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . 10W (0.417A @ 24 VDC)
Max. Input Resolution . . . . . . . . . . . . . 65Hz at 1600x1200 resolution
Video Sampling Rate . . . . . . . . . . . . . . 140MHz
Dimensions(HxWxD) . . . . . . . . . . . . . . 1.21" (3.07cm) x 4.02" (10.21cm) x 5.86" (14.88cm)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 2.75 oz (0.08Kg)
New for 2003
TPS-XVGA-BV – RGB Graphics Card
with Balanced RGB Video for Isys ™ Tilt Models
The TPS-XVGA-BV is a computer interface card with balanced video designed to be
installed into a specific expansion slot as an option for the Isys™ TPS-6000 and TPS-5000
touchpanels.The card allows computer video to be displayed on the touchpanel either full
screen or in a window. Non-interlaced input video resolutions of up to 1600x1200 are
supported by scaling up or down to the native resolution of the touchpanel. Requires
TPS-IMC-BV interface module (included).
Connectors . . . . . . . . . . . . . . . . . . . . . . 60-pin connector which attaches the card directly to the motherboard
and a 10-position RJ-45 connector for the computer video
Power Requirements . . . . . . . . . . . . . . 10 W, 24VDC, 0.417A
Max Input resolution . . . . . . . . . . . . . . 1600x1200
Max. Input Vertical Refresh Rates. . . . 65Hz at 1600x1200 resolution
Video Sampling Rate . . . . . . . . . . . . . . 140MHz
Dimensions (HxWxD) . . . . . . . . . . . . . 1.21” (3.07cm) x 4.02” (10.21cm) x 5.70” (14.48cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.75 oz (0.08 kg)
38
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
TPS-XVGAL – RGB Graphics Card for Isys™Lectern/
Wall Mounted Models
The TPS-XVGAL RGB computer interface card is an optional feature designed for Crestron's Isys™
TPS-5000L and TPS-6000L touchpanels and the TPS-TPI touchpanel interface., which allows
personal computer (PC) video to be displayed on the touchpanel full screen or in a window.
Connectors . . . . . . . . . . . . . . . . . . . . . . 60-pin connector attaches directly to the motherboard and provides five BNC
connectors for PC video access.
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . 10W (0.417A @ 24VDC)
Max. Input Resolution . . . . . . . . . . . . . 65Hz at 1600x1200 resolution
Video Sampling Rate . . . . . . . . . . . . . . 140MHz
Dimensions(HxWxD): . . . . . . . . . . . . . 1.16" (2.95cm) x 3.80" (9.65cm) x 6.00" (15.24cm)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 4.90 oz (0.14Kg)
New for 2003
TPSBLOCK-10 – 10-Pin Connector and Cable Interface
Solution for Isys ™ Tilt Models
The TPSBLOCK-10 is a plug-and-play Net/Video/RGB connection accessory for Isys™ tilt model
touchpanels, with a 10-pin female panel-mount connector ready-made for easy mounting into a
standard Extron/Altinex/Inline-type interface plate or any custom panel.The TPSBLOCK-10
provides a plug-in socket for the NET/VIDEO or Balanced RGB cable from an Isys touchpanel.
It features an integral 10’ cable to 10-pin male connector on the back end for connection to the
TPS-IMC or TPS-IMC-BV.
Connectors . . . . . . . . . . . . . . . . . . . . . . Chassis mount 10-pin female RJ-45 connector to attach to standard touchpanel
cable, and 10-pin male RJ-type connector to attach to TPS-IMC
or TPS-IMC-BV module
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 10’ (3.05m)
BB-6000 – Back Box for 15” Lectern/
Wall Mounted Isys™Models
The back box BB-6000 provides for installing a Crestron TPS-6000 (LB and LW) Lectern/Wall
Mount Touchpanel into a wall or anywhere a recessed back box is required.
Supplied Components:
One (1) Metal Electrical Box and mounting hardware
Cutout Dimensions . . . . . . . . . . . . . . . 15.125"(38.418cm) x 13.3" (33.782cm)
BB-5000 – Back Box for 12” Lectern/
Wall Mounted Isys™Models
The back box, BB-5000, provides for installing a Crestron TPS-5000 (LB and LW) or TPS-4500
(LB and LW) Lectern/Wall Mount Touchpanel into a wall or anywhere a recessed back box
is required
Supplied Components:
One (1) Metal Electrical Box and mounting hardware
Cutout Dimensions . . . . . . . . . . . . . . . 14.000" (35.560cm) x 10.750" (27.305cm)
39
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
New for 2003
BB-3000 – Back Box for 6” Lectern/
Wall Mounted Isys ™ Models
The BB-3000 is an optional recess - mounted back box for the Isys™ TPS-3000L,
suitable for installation in a wall, lectern or similar surface.
Construction . . . . . . . . . . . . . . . . . . . . . Metal box
New for 2003
BB-2000L – Back Box for 5” Lectern/
Wall Mounted Isys ™ Models
The BB-2000 is an optional recess - mounted back box for the Isys™ TPS-2000L,
suitable for installation in a wall, lectern or similar surface.
Construction . . . . . . . . . . . . . . . . . . . . . Metal box
Dimensions . . . . . . . . . . . . . . . . . . . . . . 6.5”H x 7.6”W x 3.25”D
New for 2003
MMK-2000L – Mud ring for use with
Pre-Construction Mount Kit
Mud ring for use with the PMK-2000L Pre-Construction Mount Kit or the BB-2000L Back
box to compensate for larger drywall cutout imperfections with the aid of additional
plastering.
New for 2003
PMK-2000L – Pre-Construction Mount Kit
Pre-Construction Mount Kit consists of a single metal plate that can be fastened to the
stud of a framed wall prior to hanging drywall.The plate is designed to provide the
necessary support for a single touchpanel and can mount to the right or left side of a
stud.
New for 2003
TMK-2000L – Trim ring for use with
Pre-Construction Mount Kit
Trim ring for use with the PMK-2000L Pre-Construction Mount Kit or the BB-2000L Back
box to compensate for minor drywall cutout imperfections.
40
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
New for 2003
WMKT-2000L – Dry Wall Mounting Kit
with Trim Ring
Designed to mount the TPS-2000L in a drywall/post construction application.
Comes with trim ring to compensate for minor drywall cutout imperfections
New for 2003
WMKM-2000L – Dry Wall Mounting Kit
with Mud Ring
Designed to mount the TPS-2000L in a drywall/post construction application.
Comes with mud ring to compensate for larger drywall cutout imperfections
with the aid of additional plastering.
RMK-6000 – Rack Mount Kit for 15” Lectern/
Wall Mounted Isys™Models
The RMK-6000 is a complete 9U rack mount kit that has been developed for the Crestron
TPS-6000LB and TPS-6000LW touchpanel models. Use the supplied hardware to assemble
the rack mount kit to the touchpanel.The RMK-6000 is designed to occupy nine rack
spaces or 15.72 inches (39.93cm) in a standard 19" rack.
RMK-5000 – Rack Mount Kit for 15” Lectern/
Wall Mounted Isys™Models
The RMK-5000 is a complete 7U rack mount kit that has been developed for the Crestron
TPS-5000 (LB and LW) and TPS-4500 (LB and LW) touchpanel models. Use the supplied
hardware to assemble the rack mount kit to the touchpanel.The RMK-5000 is designed
to occupy seven rack spaces or 12.22 inches (31.04cm)in a standard 19" rack.
New for 2003
RMK-TPS3000L – Rack Mount Kit for 6”Lectern/
Wall Mounted Isys ™ Models
The RMK-TPS3000L allows the Isys™ TPS-3000L to be mounted into a vertical
equipment rack.
Construction . . . . . . . . . . . . . . . . . . . . . Black metal
41
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
™
I S YS TO U C H PA N E L CO N T R O L S YS T E M ACC E S S O R I E S c o n t i n u e d
New for 2003
TPS-CBL-3 – Single Network/Video Cable
for Isys ™ Models
The TPS-CBL cables provide network and video connections for Isys™
tilt-model touchpanels.
Connectors . . . . . . . . . . . . . . . . . . . . . . (2) 10-pin RJ-45
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 3’
MODEL OPTIONS:
All the features of the TPS-CBL-3 with the following exceptions:
TPS-CBL-6 . . . . . . . . . . . . . . . . . . Length, 6’
TPS-CBL-9 . . . . . . . . . . . . . . . . . . Length, 9’
New for 2003
TPS-CBL-S3 – Siamese Network/Video/Audio
Cable for Isys ™ Models
The TPS-CBL-S cables provide network, video and audio connections for Isys™
tilt-model touchpanels.
Connectors . . . . . . . . . . . . . . . . . . . . . . (2) 10-pin RJ-45, (2) 8-pin RJ-45
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 3’
MODEL OPTIONS:
All the features of the TPS-CBL-S3 with the following exceptions:
TPS-CBL-S6 . . . . . . . . . . . . . . . . . Length, 6’
TPS-CBL-S9 . . . . . . . . . . . . . . . . . Length, 9’
New for 2003
TPS-CBL-T3 – Triamese Network/Video/Audio/
RGB Cable for Isys ™ Models
The TPS-CBL-T cables provide network,video, audio and balanced RGB connections
for Isys™ tilt-model touchpanels.
Connectors . . . . . . . . . . . . . . . . . . . . . . (4)10-pin RJ-45, (2) 8-pin RJ-45
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 3’
MODEL OPTIONS:
All the features of the TPS-CBL-T3 with the following exceptions:
TPS-CBL-T6 . . . . . . . . . . . . . . . . . Length, 6’
TPS-CBL-T9 . . . . . . . . . . . . . . . . . Length, 9’
42
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
C O M PAC T WA L L - M O U N T E D T O U C H PA N E L S
CT-1000 – ColorTouch™ 4” Color
Wall-Mounted Touchpanel
The CT-1000 is a 3.8" diagonal passive matrix color LCD touchpanel designed for
wall- mounting.This single, compact touchpanel ends the age of walls cluttered with
switches, control panels and thermostats.The CT-1000 can be fully customized for any
control environment, with graphic icons and programmable “quick” pushbuttons that let
users easily select and control any function.The crisp, clear display automatically adjusts
itself to changing lighting conditions, dimming and brightening as needed. Storage and
playback of WAV sound files add a whole new dimension to control. Optional Designer
Series faceplates (CT/LC-FP) coordinate with any decor.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Passive matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 3.8"/9.6cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 240x320 pixels
Screen Illumination . . . . . . . . . . . . . . . Backlit fluorescent
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Plastic with optional back box
Communications . . . . . . . . . . . . . . . . . Cresnet: (1) 4-wire screw mini terminal type connector
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 768Kb flash memory for display and WAV files
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.25A; 6W
Dimensions (HxWxD) . . . . . . . . . . . . . 4.77"(12.10cm) x 4.86" (12.34cm) x 1.59" (4.04cm) with faceplate
Weight Total . . . . . . . . . . . . . . . . . . . . . 8.6 oz (.25Kg) (not including box or bracket)
Quick Pushbuttons. . . . . . . . . . . . . . . . (10) flank LCD display—used to access frequently used commands
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
ADDITIONAL OPTIONS:
BB-1000 . . . . . . . . . . . . . . . . . . . . . . Wall mounting back box
CT/LC-FP . . . . . . . . . . . . . . . . . . . . . Designer series faceplates and engravable buttons
CT/LC-WPK . . . . . . . . . . . . . . . . . . . Water resistant cover kit
LC-1000 – BriteTouch™ 4” Grayscale
Wall-Mounted Touchpanel
The LC-1000 is a 3.8" diagonal passive matrix grayscale LCD touchpanel designed for
wall-mounting.This single, compact touchpanel ends the age of walls cluttered with
switches and control panels.The LC-1000 can be fully customized for any control
environment, with graphic icons and programmable ”quick” pushbuttons that let users
easily select and control any function.The crisp, clear display automatically adjusts itself
to changing lighting conditions, dimming and brightening as needed. Storage and
playback of WAV sound files adds a whole new dimension to control. Optional Designer
Series faceplates (CT/LC-FP) coordinate with any decor.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Passive matrix grayscale LCD
Screen Dimensions . . . . . . . . . . . . . . . 3.8"/9.6cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 240x320 pixels
Screen Illumination . . . . . . . . . . . . . . . White LED backlight, automatically adjusts to changing lighting conditions
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Plastic with optional back box
Communication . . . . . . . . . . . . . . . . . . Cresnet (1) 4-wire screw mini terminal type connector
Memory:
Size,Type . . . . . . . . . . . . . . . . . . . . 768Kb flash memory for display and WAV files
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.125A; 3W
Dimensions (HxWxD) . . . . . . . . . . . . . 4.77"(12.10cm) x 4.86" (12.34cm) x 1.59" (4.04cm) with faceplate
Weight Total . . . . . . . . . . . . . . . . . . . . . 8.6 oz (.25Kg) (not including box or bracket)
Quick Pushbuttons. . . . . . . . . . . . . . . . (10) flank LCD display—used to access frequently used commands
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
ADDITIONAL OPTIONS:
BB-1000 . . . . . . . . . . . . . . . . . . . . . . Wall mounting back box
CT/LC-FP . . . . . . . . . . . . . . . . . . . . . Designer series faceplates and engravable buttons
CT/LC-WPK . . . . . . . . . . . . . . . . . . . Water resistant cover kit
43
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
C O M PAC T WA L L - M O U N T E D T O U C H PA N E L AC C E S S O R I E S
CT/LC-FP – Designer Series Faceplates for Compact
Wall Mounted Touchpanels
The CT/LC-FP faceplates replace the standard faceplates for both the CT-1000
and LC-1000 touchpanels. Installing easily without tools, these designer faceplates
allow the touchpanel to complement any commercial or residential decor.
ENGRAVING AVAILABLE ON BUTTONS ONLY:
CT/LC-FP-S/STEEL . . . . . . . . . . . Stainless Steel with Black trim and buttons
CT/LC-FP-BLK/CHRM. . . . . . . . Black Chrome with Black trim and buttons
CT/LC-FP-BR/GLD . . . . . . . . . . . Brushed Gold with Black trim and buttons
CT/LC-FP-P/BLK . . . . . . . . . . . . . Polished Black with Black trim and buttons
CT/LC-FP-P/BRASS . . . . . . . . . . Polished Brass with Black trim and buttons
CT/LC-FP-P/GLD . . . . . . . . . . . . . Polished Gold with Black trim and buttons
CT/LC-FPINW . . . . . . . . . . . . . . . . Primed Faceplate to cover with paint or wallpaper,
with White trim and buttons
CT/LC-FPINB . . . . . . . . . . . . . . . . . Primed Faceplate to cover with paint or wallpaper,
with Black trim and buttons
CT/LC-FPINA . . . . . . . . . . . . . . . . . Primed Faceplate to cover with paint or wallpaper,
with Almond trim and buttons
ENGRAVING AVAILABLE ON FACEPLATE AND BUTTONS:
CT/LC-FPW . . . . . . . . . . . . . . . . . . . White buttons
CT/LC-FPB . . . . . . . . . . . . . . . . . . . . Black buttons
CT/LC-FPA . . . . . . . . . . . . . . . . . . . . Almond buttons
ENGRAVING AVAILABLE ON FACEPLATES ONLY:
CT/LC-FPW-NB . . . . . . . . . . . . . . . White Faceplate, no buttons
CT/LC-FPB-NB . . . . . . . . . . . . . . . Black Faceplate, no buttons
CT/LC-FPA-NB . . . . . . . . . . . . . . . Almond Faceplate, no buttons
BB-1000 – Wall mounting back box for CT-1000
and LC-1000
The BB-1000 is an optional recess - mounted back box for the CT/LC-1000 touchpanel,
suitable for installation in a wall, lectern or similar surface.
Dimensions (HxWxD) . . . . . . . . . . . . . 4.49" (11.39cm) x 4.50" (11.44cm) x 3.0” (7.62 cm)
New for 2003
CT/LC-WPK – Water Resistant Cover Kit for
CT-1000 and LC-1000 (Pack of 4)
These covers are great for protecting compact 4” wall-mounted touchpanels under damp
or splashy conditions, such as basements, pools, boathouses, bathrooms, laundries and
garages. Each kit contains four urethane covers, which install easily without tools over the
faceplate of the touchpanel.They effectively prevent liquids and other airborne materials
from settling directly onto the panel, while allowing regular usage of the unit.These covers
make the touchpanels water-resistant not water-proof, and therefore are not
recommended for use under extreme outdoor weather conditions.
Kit Contents . . . . . . . . . . . . . . . . . . . . . Four flexible urethane covers
Dimensions (HxWxD) . . . . . . . . . . . . . 4.86” (12.34cm) x 4.77” (12.12cm) x 0.23” (0.58cm)
44
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E D T O U C H PA N E L S
™
CT-1600 – ColorTouch 6” Color Touchpanel
The CT-1600 is a 5.7" diagonal passive matrix color LCD touchpanel with an adjustable
tiltcase and position lock.The CT-1600's icons, graphics and text, with 256 colors, replace
large, complicated control panels with a series of simpler screens, each specific to the
application at hand.
Display Type . . . . . . . . . . . . . . . . . . . . . Passive matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 5.7"/14.4cm diagonal
Screen Resolution . . . . . . . . . . . . . . . . 320x240 pixels
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Screen Tilt . . . . . . . . . . . . . . . . . . . . . . . Adjustable screen tilt, 0-70 degrees
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Adjustable tiltcase; black plastic
Communications . . . . . . . . . . . . . . . . . Cresnet (1) 4-wire screw terminal type connector
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 768Kb flash memory
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.25A; 6W
Dimensions (HxWxD) . . . . . . . . . . . . . 5.97"(15.16cm) x 7.67" (19.48cm) x 5.32" (13.51cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.82lb (1.28Kg)
MODEL OPTIONS:
All the features of the CT-1600, with the following exceptions:
CT-1600L/W-DB
Enclosure . . . . . . . . . . . . . . . . . . . . Wall mount with black faceplate, no screen tilt
Dimensions (HxWxD) . . . . . . . . . 6.49"(16.49cm) x 7.64" (19.39cm) x 1.68" (4.26cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . 1.71lb (0.77Kg)
CT-1600L/W-DW
Enclosure . . . . . . . . . . . . . . . . . . . . Wall mount with white faceplate, no screen tilt
Dimensions (HxWxD) . . . . . . . . . 6.49"(16.49cm) x 7.64" (19.39cm) x 1.68" (4.26cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . 1.71lb (0.77Kg)
45
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E D T O U C H PA N E L AC C E S S O R I E S
RMK-1600 – Rack Mount Kit for 6” Touchpanels
The RMK-1600 allows Crestron 5.7" diagonal touchpanels to be mounted into a vertical
equipment rack.
For Touchpanel Models . . . . . . . . . . . . CT-1600L/W-DB & DW
Rack Space Occupied . . . . . . . . . . . . . 7" vertical (4) rack spaces (fits in standard 19"rack)
Construction . . . . . . . . . . . . . . . . . . . . . Black Metal
BB-1600 – Back Box for 6” Touchpanels
The BB-1600 is an optional recess - mounted back box for the Series 1600 Lectern/Wall
Mount Touchpanel, suitable for installation in a wall, lectern or similar surface.
Dimensions (HxW, cutout) . . . . . . . . . 5.39"(13.68cm) x 7.44"(18.85cm)
46
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L S
New for 2003
ST-1700C – 1-Way 6” Wireless Color Touchpanel
The new ST-1700C is the latest in Crestron’s popular line of handheld wireless
touchpanels.The industry’s only high-resolution wireless active matrix display,
the stunning on-screen quality delivers 64,000 colors, and produces a dazzling
high-resolution picture.
In addition to the astounding on-screen display, the ST-1700C goes the extra mile with
five engraveable push buttons on each side for quick and handy “one-touch” control.
The ST-1700C features new fast-charging long-life NiMh batteries and is compatible with
the CNRFGWA RF Gateway
Touchscreen
Display Type . . . . . . . . . . . . . . . . . . . . . 5.7” active matrix color display with 320x240 resolution
16 bit non-palette graphics
CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MIPs Coldfire processor running ISYS generation firmware
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 4Mbytes of Flash (at least 3 MB for user display lists)
8Mbytes of SDRAM
EEPROM for NV storage of last page and join#’s etc.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 5 buttons on each side of the display
Internal Logic . . . . . . . . . . . . . . . . . . . . 1-way panel executes STS panel local logic
Connectors . . . . . . . . . . . . . . . . . . . . . . 3 position mini headphone jack for Cresnet/RS-232 Panel Loading
12DC power jack
RF support. . . . . . . . . . . . . . . . . . . . . . . 1-way, 434MHz
Compatible with CNRFGWA
2-way . . . . . . . . . . . . . . . . . . . . . . . All versions 418MHz, compatible with STRFGWX
Power Requirements
ST-BTP . . . . . . . . . . . . . . . . . . . . . . Rechargeable, high performance NiMh power pack, removable
(included) or 110/220V external power supply (included)
ST-DS Docking Station . . . . . . . . 12 VDC power pack
Power pack . . . . . . . . . . . . . . . . . . 12 VDC
Included Components
ST-BTP . . . . . . . . . . . . . . . . . . . . . . Rechargeable NiMh battery pack
(fits in compartment on underside of touchpanel)
ST-DS . . . . . . . . . . . . . . . . . . . . . . . Docking station/charger with external power pack
MODEL OPTIONS:
All the features of the ST-1700C with the following exceptions
STI-1700C . . . . . . . . . . . . . . . . . . . . International Version
STX-1700C . . . . . . . . . . . . . . . . . . . Two-way Version
STXI-1700C . . . . . . . . . . . . . . . . . . Two-way International Version
47
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L S c o n t i n u e d
ST-1550C – 1-Way Wireless 6”
Color Tilt Touchpanel
The ST-1550C is a color LCD touchpanel which communicates via RF signals with
the Cresnet system.The RF signal allows complete freedom of movement up to 300 feet,
even through walls, indoors or outside. Its lightweight, contoured case is easily held in one
hand, and is ideal for applications in audio, video, lighting and environmental control.
Touchscreen:
Display Type . . . . . . . . . . . . . . . . . . . . . Passive matrix color LCD
Screen Dimensions . . . . . . . . . . . . . . . 5.7" (14.5cm) diagonal
Screen Resolution . . . . . . . . . . . . . . . . 320x240 pixels
Illumination. . . . . . . . . . . . . . . . . . . . . . Backlit fluorescent
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . High impact, fixed angle case, black molded plastic
Connectors:
Stereo phone jack . . . . . . . . . . . . To upload touchscreen projects via PC
AC power pack connector . . . . . Power pack connector for external power pack
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 768KB flash memory for display
Communications . . . . . . . . . . . . . . . . . Radio Frequency (RF) 1-way, 434 MHz RF between touchpanel and
CNRFGWA, range up to 300 ft.
Power Requirements:
ST-BTP . . . . . . . . . . . . . . . . . . . . . . Rechargeable, high performance Nicad power pack, removable
(included) or 110/220V external power supply (included)
ST-DS Docking Station . . . . . . . . 12 VDC power pack
Power pack . . . . . . . . . . . . . . . . . . 12 VDC
Dimensions (HxWxD):
ST-1550C . . . . . . . . . . . . . . . . . . . . 5.7" (14.5cm) x 8.8" (22.2cm) x 3.3" (8.5cm)
ST-DS . . . . . . . . . . . . . . . . . . . . . . . 0.9" (2.5cm) x 6.7" (17.1cm) x 6.8" (17.2cm)
Weight:
ST-1550C . . . . . . . . . . . . . . . . . . . . 1.85lb (0.84Kg)
Included Components:
ST-BTP . . . . . . . . . . . . . . . . . . . . . . Rechargeable NiCad battery pack
(fits in compartment on underside of touchpanel)
ST-DS . . . . . . . . . . . . . . . . . . . . . . . Docking station/charger with external power pack
ADDITIONAL ACCESSORIES:
CNRFGWA . . . . . . . . . . . . . . . . . . . . 1-way RF Gateway
MODEL OPTIONS:
All the features of the ST-1550C with the following exceptions:
STI-1550C . . . . . . . . . . . . . . . . . . . . International Version, 220V, 418 MHz RF between
touchpanel and control processor
48
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L S c o n t i n u e d
New for 2003
MT-500C – MiniTouch
Small screen control of large-scale Crestron systems is easy with the new Crestron
MT-500C. Our new MiniTouch features a 3” color touchscreen display with eight
programmable push buttons.
With a 200’ RF wireless range, the Crestron MiniTouch can be
used with Crestron’s CNRFGWA-418 RF Gateway and any Crestron 2-Series control system.
Powered with fast-charging NiMh batteries, the Crestron MiniTouch comes complete with
a docking station, and is programmed with Crestron’s VT-Pro-e software.
Power Requirements . . . . . . . . . . . . . 4.8 VDC (NiMh, 600mAh)
RS-232 Ports . . . . . . . . . . . . . . . . . . . . For loading screens
RF output . . . . . . . . . . . . . . . . . . . . . . . 418 MHZ
Memory . . . . . . . . . . . . . . . . . . . . . . . . 8 MB non-volatile flash memory
LCD screen . . . . . . . . . . . . . . . . . . . . . . 320 x 240, 256 color, passive matrix, backlit
VT Pro-e Version . . . . . . . . . . . . . . . . . 2.5 or higher
Operation Temperature . . . . . . . . . . . 0°C to 50°C (32°F to 122°F)
Dimensions Height: . . . . . . . . . . . . . . . 5.60 in (14.23 cm) Width: 3.70 in (9.40cm) Depth: 1.30 in (3.31 cm)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 9 oz (.28 kg)
49
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L AC C E S S O R I E S
STRFGWX – 2-Way RF Gateway/
Transceiver for 6” Touchpanels
The STRFGWX is a 2-way radio frequency (RF) transceiver that communicates with the
wireless Crestron 2-Way RF Compact Color Touchpanel, STX-1550C or STX-1550CW.
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . 12VDC from external power pack PW-1205 or 24VDC network power (3W).
RF Communications: . . . . . . . . . . . . . . 2-Way, 418MHz, range 3 ft to 75 ft.
Dimensions (HxWxD): . . . . . . . . . . . . . 1.70" (4.32cm) x 6.94" (17.63cm) x 6.32" (16.07cm)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 2.10lb (0.95Kg)
Ports:
12 VDC .5 A . . . . . . . . . . . . . . . . . . Direct current (DC) power socket connector is used to supply power via
the external power pack.
NET (Modular Cresnet) . . . . . . . . Two 6-pin, 6-position RJ11 modular jacks are used to connect to
modular devices in the Cresnet system.Two NET ports are available so
that network units can be daisy-chained together.
NET (Four-Wire Cresnet) . . . . . . . 4-pin connector is used to connect to other four-wire devices in the
Cresnet system.
Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Green LED illuminates when 12VDC power is supplied.
NET . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED illuminates when communication with Cresnet system is established.
RF:
Three LEDs monitor RF communications:
SIG . . . . . . . . . . . . . . . . . . . . . Red LED illuminates when transceiver is operational.
Rx . . . . . . . . . . . . . . . . . . . . . . Red LED illuminates when a command is received from a touchpanel
Tx . . . . . . . . . . . . . . . . . . . . . . Red LED illuminates when a command is transmitted to a touchpanel.
MODEL OPTIONS:
All the features of the STRFGWX with the following exceptions:
STRFGWXI. . . . . . . . . . . . . . . . . . . . (for use with STXI-1550C) International Version, 220V
uses PWI-1210 power pack
CNRFGWA – 1-Way RF Receiver
The CNRFGWA is a one-way radio frequency transceiver that communicates
with all Crestron one-way wireless touchpanels and RF transmitters.
The unit receives RF signals from one or more panels and translates them into
commands for transmission over the control network.
Communications . . . . . . . . . . . . . . . . . Radio Frequency (RF)1-way; 434MHz
Communications Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin male connector; to Cresnet control network
LED Indicators
SIGNAL. . . . . . . . . . . . . . . . . . . . . . Indicates reception of valid RF signal
ID SELECT. . . . . . . . . . . . . . . . . . . . Indicates established communication between unit and Cresnet control
system
NET PWR . . . . . . . . . . . . . . . . . . . . Indicates 24VAC power supplied from Cresnet control network
Power Requirements . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 3.0W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Dimensions (HxWxD) . . . . . . . . . . . . . 7.28" (18.49cm) x 3.25" (8.25cm) x 1.35" (3.44cm)
Antenna Length . . . . . . . . . . . . . . . . . . 7.90" (20.1cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1lb (0.5Kg)
50
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L AC C E S S O R I E S c o n t i n u e d
CNANT – High-Performance Extension Antenna
The CNANT is a high performance indoor ground plane (base) antenna designed to
surpass the performance of the factory-supplied antenna provided with Crestron receivers
such as the CNRFGWA and ST-CP. Its omni-directional radiation pattern and remote
installation permits more gain and extends its communication range.The remote
capability of the CNANT permits it to be mounted anywhere indoors within 15 feet (or up
to 50 feet with longer cable, not supplied) of the receiver.
Frequency Range . . . . . . . . . . . . . . . . . 400-440 MHz
Gain (min) . . . . . . . . . . . . . . . . . . . . . . . Unity
Connectors . . . . . . . . . . . . . . . . . . . . . . 2 BNC female
Impedance . . . . . . . . . . . . . . . . . . . . . . 50 Ohms
Radiation Pattern . . . . . . . . . . . . . . . . . Omnidirectional
Dimensions (HxWxD) (upright) . . . . . 21.5" (54.61cm) x 13.5" (34.29cm) x 13.5"(34.29cm)
Weight (without cable) . . . . . . . . . . . . 0.51lb (1.12Kg)
Included. . . . . . . . . . . . . . . . . . . . . . . . . 15' (45.72 m) BNC cable
ST-DS – Docking Station/Charger for 6”
Wireless touchpanels
The ST-DS is a microprocessor based docking station for the ST-1550C, STX-1550C,
and ST-1550 touchpanels.The ST-DS can also charge the ST-BTP in 2 hours, whereas
trickle charging (ST-BTP installed in touchpanel) can take up to 24 hours. Included
with all ST/STX-1550 panels.
Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC power socket connector, used to supply power via external power pack
LED Indicators:
External Power . . . . . . . . . . . . . . . . . Green LED illuminates when power is provided to the ST-DS via the
specified external power pack
CHG (Charge) . . . . . . . . . . . . . . . . . . Red LED illuminates when the ST-BTP is inserted into the ST-DS battery
cavity and remains ON while the battery is charging. If the CHG LED blinks
every second, it is in a “charge pending”state.When fast charging, the LED
will remain ON
RDY (Ready) . . . . . . . . . . . . . . . . . . . Red LED illuminates when the ST-BTP in the ST-DS battery cavity
is fully charged
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External power pack included (Crestron PW-1215)
Connectors. . . . . . . . . . . . . . . . . . . . . . . . . DC power socket connector used to supply power via the recommended
external power pack
Dimensions (HxWxD) . . . . . . . . . . . . . . 6.76" (17.18cm) x 6.72" (17.06cm) x 0.94" (2.38cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.01lbs (0.46Kg)
MODEL OPTIONS:
All the features of the ST-DS with the following exceptions:
STI-DS . . . . . . . . . . . . . . . . . . . . . . . . International version, 220V
For Models STI-1550, STI-1550C, STXI-1550C. Uses PWI-1215 power pack
51
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L AC C E S S O R I E S c o n t i n u e d
ST-BC – Battery Pack Recharger/
Battery Packs for STX-3500C
+ ST-1500 Series
The ST-BC is designed to provide rapid charge/discharge of the ST-BP rechargeable
battery pack for use with the STX-3500C touchpanel. Rather
than trickle charging the ST-BP in the touchpanel, the ST-BC can charge
a fully discharged ST-BP in 2 hours. Ships with one ST-BP.
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates when power is supplied to the unit
CHG . . . . . . . . . . . . . . . . . . . . . . . . Indicates when ST-BP inserted into unit is charging
RDY. . . . . . . . . . . . . . . . . . . . . . . . . Indicates when ST-BP inserted into unit is fully charged
FLT . . . . . . . . . . . . . . . . . . . . . . . . . Indicates ST-BP is inserted into unit incorrectly or there is
a problem with the ST-BP
DISCHG . . . . . . . . . . . . . . . . . . . . . Indicates when ST-BP inserted into unit is discharging
Power Requirements . . . . . . . . . . . . . . 12VDC, 1.5A adapter; included
Dimensions (HxWxD) . . . . . . . . . . . . . 1.59" (4.04cm) x 5.11" (12.98cm) x 5.37" (13.63cm)
Includes . . . . . . . . . . . . . . . . . . . . . . . . . (1) ST-BP battery pack
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3lb (0.6Kg)
MODEL OPTIONS:
All the features of the ST-BC with the following exceptions:
STI-BC . . . . . . . . . . . . . . . . . . . . . . . . (International version)
Power Options . . . . . . . . . . . . . . . . . . . AC adapter (220VAC compatible); included
DA-1550CW – Docking Assembly for STX-1550CW
The DA-1550CW connects directly to the BB-1550CW back box. This
microprocessor-based docking assembly charges the ST-BTP rechargeable
NiCad battery pack contained in the docked STX-1550CW. Included with the
STX-1550CW.
Power Requirements . . . . . . . . . . . . . . 34W ([email protected])
Dimensions (HxWxD) . . . . . . . . . . . . . . 6.51" (16.54cm) x 5.57" (14.14cm) x 3.56" (9.05cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.21lb (1.46Kg)
BB-1550CW – Back Box for STX-1550CW
The back box, BB-1550CW, is the mounting hardware that secures a Crestron
STX-1550CW touchpanel to a wall or other suitable mounting surface.
Included with the STX-1550CW.
Supplied Components:
One (1) Metal Enclosure and mounting hardware
Cutout Dimensions . . . . . . . . . . . . . . . 6.14"(15.61cm) x 6.78"(17.23cm)
52
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
T O U C H PA N E L S
W I R E L E S S T O U C H PA N E L AC C E S S O R I E S c o n t i n u e d
ST-BP – Battery Pack for use with STX-3500C
+ ST-1500 Series
The ST-BP is a removable, rechargeable NiCad battery pack for the
STX-3500C wireless touchpanel. (2) are required.
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removable, rechargeable NiCad
Capacity (fully charged) . . . . . . . . . . . 2800mAh
Dimensions (HxWxD) . . . . . . . . . . . . . . 2.05" (5.21cm) x 3.92" (9.96cm) x 1.03" (2.62cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65lb (0.3Kg)
ST-BTP – Rechargeable Battery Pack for 6”
Wireless Touchpanel
This high-performance rechargeable battery pack is designed to power all configurations
of the STX-1550C, STX-1550CW, ST-1550C, and ST-1550 wireless touchpanels.The unique
design of the ST-BTP prevents it from being installed improperly, as it fits only one way
into the battery compartment of the touchpanel.
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removable, rechargeable NiCad
Dimensions (HxWxD) . . . . . . . . . . . . . . 1.16" (2.94cm) x 4.25" (10.78cm) x 2.28" (5.79cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.79lb (0.36Kg)
53
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S
New for 2003
CNX-B12B – 12-Button Designer Keypad
The CNX-B12B wall-mounted designer keypad with black buttons and faceplate is a great
choice for AV control. Used singly or in groups, it’s ideal for on/off functions, dimming or
even complex control sequences.The large, ergonomically correct, engraveable buttons
are easy to read from any angle, and backlighting makes them a snap to locate, even in
the dark.The keypads play WAV sound files and deliver audio feedback of commands,
while LED indicators deliver visual feedback of commands.
Also, a temperature sensor lets you monitor the HVAC system. Available with a variety
of button caps, inlays and finishes that blend elegantly into any décor.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Single gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . Black removable faceplate
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 12 Black, backlit buttons (Optional engraving not included)
Feedback Indicators. . . . . . . . . . . . . . . 12 LEDs visible through button cap light pipe
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
Temperature Sensor. . . . . . . . . . . . . . . Temperature sensor reports to Cresnet for HVAC monitoring
Power Factor . . . . . . . . . . . . . . . . . . . . . 3W
ADDITIONAL OPTIONS:
B-G1-FP . . . . . . . . . . . . . . . . . . . . . . Single gang Designer Series Faceplates in a variety of finishes
B-G2-FP . . . . . . . . . . . . . . . . . . . . . . Two gang Designer Series Faceplates in a variety of finishes, for
ganging two CNX-B keypads
B-G3-FP . . . . . . . . . . . . . . . . . . . . . . Three gang Designer Series Faceplates in a variety of finishes, for
ganging three CNX-B keypads
MODEL OPTIONS:
All the features of the CNX-B12B with the following exceptions:
CNX-B12W . . . . . . . . . . . . . . . . . . White faceplate and buttons
CNX-B12A . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
54
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S c o n t i n u e d
New for 2003
CNX-B8B – 8-Button Designer Keypad
The CNX-B8B wall-mounted designer keypad with black buttons and faceplate is a great
choice for AV control. Used singly or in groups, it’s ideal for on/off functions, dimming or
even complex control sequences.The large, ergonomically correct, engraveable buttons
are easy to read from any angle, and backlighting makes them a snap to locate, even in
the dark.The keypads play WAV sound files and deliver audio feedback of commands,
while LED indicators deliver visual feedback of commands.
Also, a temperature sensor lets you monitor the HVAC system. Available with a variety of
button caps, inlays and finishes that blend elegantly into any décor.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Single gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . Black removable faceplate
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 8 Black, backlit buttons (Optional engraving not included)
Feedback Indicators. . . . . . . . . . . . . . . 8 LEDs visible through button cap light pipe
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
Temperature Sensor. . . . . . . . . . . . . . . Temperature sensor reports to Cresnet for HVAC monitoring
Power Factor . . . . . . . . . . . . . . . . . . . . . 3W
ADDITIONAL OPTIONS:
B-G1-FP . . . . . . . . . . . . . . . . . . . . . . Single gang Designer Series Faceplates in a variety of finishes
B-G2-FP . . . . . . . . . . . . . . . . . . . . . . Two gang Designer Series Faceplates in a variety of finishes, for
ganging two CNX-B keypads
B-G3-FP . . . . . . . . . . . . . . . . . . . . . . Three gang Designer Series Faceplates in a variety of finishes, for
ganging three CNX-B keypads
MODEL OPTIONS:
All the features of the CNX-B8B with the following exceptions:
CNX-B8W . . . . . . . . . . . . . . . . . . . White faceplate and buttons
CNX-B8A . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
55
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S c o n t i n u e d
New for 2003
CNX-B6B – 6-Button Designer Keypad
The CNX-B6B wall-mounted designer keypad with black buttons and faceplate is a great
choice for AV control. Used singly or in groups, it’s ideal for on/off functions, dimming or
even complex control sequences.The large, ergonomically correct, engraveable buttons
are easy to read from any angle, and backlighting makes them a snap to locate, even in
the dark.The keypads play WAV sound files and deliver audio feedback of commands,
while LED indicators deliver visual feedback of commands.
Also, a temperature sensor lets you monitor the HVAC system. Available with a variety of
button caps, inlays and finishes that blend elegantly into any décor.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Single gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . Black removable faceplate
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 6 Black, backlit buttons (Optional engraving not included)
Feedback Indicators. . . . . . . . . . . . . . . 6 LEDs visible through button cap light pipe
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
Temperature Sensor. . . . . . . . . . . . . . . Temperature sensor reports to Cresnet for HVAC monitoring
Power Factor . . . . . . . . . . . . . . . . . . . . . 3W
ADDITIONAL OPTIONS:
B-G1-FP . . . . . . . . . . . . . . . . . . . . . . Single gang Designer Series Faceplates in a variety of finishes
B-G2-FP . . . . . . . . . . . . . . . . . . . . . . Two gang Designer Series Faceplates in a variety of finishes, for
ganging two CNX-B keypads
B-G3-FP . . . . . . . . . . . . . . . . . . . . . . Three gang Designer Series Faceplates in a variety of finishes, for
ganging three CNX-B keypads
MODEL OPTIONS:
All the features of the CNX-B6B with the following exceptions:
CNX-B6W . . . . . . . . . . . . . . . . . . . White faceplate and buttons
CNX-B6A . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
56
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S c o n t i n u e d
New for 2003
CNX-B4B – 4-Button Designer Keypad
The CNX-B4B wall-mounted designer keypad with black buttons and faceplate is a great
choice for AV control. Used singly or in groups, it’s ideal for on/off functions, dimming or
even complex control sequences.The large, ergonomically correct, engraveable buttons
are easy to read from any angle, and backlighting makes them a snap to locate, even in
the dark.The keypads play WAV sound files and deliver audio feedback of commands,
while LED indicators deliver visual feedback of commands.
Also, a temperature sensor lets you monitor the HVAC system. Available with a variety of
button caps, inlays and finishes that blend elegantly into any décor.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Single gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . Black removable faceplate
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 4 Black, backlit, buttons (Optional engraving not included)
Feedback Indicators. . . . . . . . . . . . . . . 4 LEDs visible through button cap light pipe
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
Temperature Sensor. . . . . . . . . . . . . . . Temperature sensor reports to Cresnet for HVAC monitoring
Power Factor . . . . . . . . . . . . . . . . . . . . . 3W
ADDITIONAL OPTIONS:
B-G1-FP . . . . . . . . . . . . . . . . . . . . . . Single gang Designer Series Faceplates in a variety of finishes
B-G2-FP . . . . . . . . . . . . . . . . . . . . . . Two gang Designer Series Faceplates in a variety of finishes, for
ganging two CNX-B keypads
B-G3-FP . . . . . . . . . . . . . . . . . . . . . . Three gang Designer Series Faceplates in a variety of finishes, for
ganging three CNX-B keypads
MODEL OPTIONS:
All the features of the CNX-B4B with the following exceptions:
CNX-B4W . . . . . . . . . . . . . . . . . . . White faceplate and buttons
CNX-B4A . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
57
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S c o n t i n u e d
New for 2003
CNX-B2B – 2-Button Designer Keypad
The CNX-B2B wall-mounted designer keypad with black buttons and faceplate is a great
choice for AV control. Used singly or in groups, it’s ideal for on/off functions, dimming or
even complex control sequences.The large, ergonomically correct, engraveable buttons
are easy to read from any angle, and backlighting makes them a snap to locate, even in
the dark.The keypads play WAV sound files and deliver audio feedback of commands,
while LED indicators deliver visual feedback of commands.
Also, a temperature sensor lets you monitor the HVAC system. Available with a variety of
button caps, inlays and finishes that blend elegantly into any décor.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Single gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . Black removable faceplate
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 2 Black, backlit, buttons (Optional engraving not included)
Feedback Indicators. . . . . . . . . . . . . . . 2 LEDs visible through button cap light pipe
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in speaker to play stored WAV files
Temperature Sensor. . . . . . . . . . . . . . . Temperature sensor reports to Cresnet for HVAC monitoring
Power Factor . . . . . . . . . . . . . . . . . . . . . 3W
ADDITIONAL OPTIONS:
B-G1-FP . . . . . . . . . . . . . . . . . . . . . . Single gang Designer Series Faceplates in a variety of finishes
B-G2-FP . . . . . . . . . . . . . . . . . . . . . . Two gang Designer Series Faceplates in a variety of finishes, for
ganging two CNX-B keypads
B-G3-FP . . . . . . . . . . . . . . . . . . . . . . Three gang Designer Series Faceplates in a variety of finishes, for
ganging three CNX-B keypads
MODEL OPTIONS:
All the features of the CNX-B2B with the following exceptions:
CNX-B2W . . . . . . . . . . . . . . . . . . . White faceplate and buttons
CNX-B2A . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
58
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S c o n t i n u e d
New for 2003
B-G1-FP – 1-Gang Designer Series Faceplates
The CNX-B Series Designer Keypads can be fully customized with a wide variety of
designer finishes, and can also accommodate painting, wallpapering and custom laser
engraving.The B-G1-FP 1-Gang Designer Series faceplates replace the standard faceplates
and install easily without tools. Available in almond, black, white, black chrome, brushed
gold, polished black, polished brass, polished gold and stainless steel, along with a primed
option that accommodates paint or wallpaper, they allow the CNX-B keypads to enhance
any residential or commercial décor.
ENGRAVING AVAILABLE ON BUTTONS ONLY
B-G1-FP-BLK/CHR . . . . . . . . . . . Black Chrome with black trim and buttons
B-G1-FP-BR/GLD . . . . . . . . . . . . Brushed Gold with black trim and buttons
B-G1-FP-P/BLK . . . . . . . . . . . . . . Polished Black with black trim and buttons
B-G1-FP-P/BRASS . . . . . . . . . . . Polished Brass with black trim and buttons
B-G1-FP-P/GLD . . . . . . . . . . . . . . Polished Gold with black trim and buttons
B-G1-FP-S/STEEL . . . . . . . . . . . . Stainless Steel with black trim and buttons
B-G1-FP-PRIMED . . . . . . . . . . . . Primed faceplate to cover with paint or wallpaper
B-G1-FPA . . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
B-G1-FPB . . . . . . . . . . . . . . . . . . . . . Black faceplate and buttons
B-G1-FPW . . . . . . . . . . . . . . . . . . . . White faceplate and buttons
New for 2003
B-G2-FP – 2-Gang Designer Series Faceplates
The CNX-B Series Designer Keypads can be fully customized with a wide variety of
designer finishes, and can also accommodate painting, wallpapering and custom laser
engraving.The B-G2-FP Designer Series faceplates allow ganging of any two CNX-B
keypads, replacing the standard faceplates and installing easily without tools. Available in
almond, black, white, black chrome, brushed gold, polished black, polished brass, polished
gold and stainless steel, along with a primed option that accommodates paint or
wallpaper, they allow the CNX-B keypads to enhance any residential or commercial décor.
ENGRAVING AVAILABLE ON BUTTONS ONLY
B-G2-FP-BLK/CHR . . . . . . . . . . . Black Chrome with black trim and buttons
B-G2-FP-BR/GLD . . . . . . . . . . . . Brushed Gold with black trim and buttons
B-G2-FP-P/BLK . . . . . . . . . . . . . . Polished Black with black trim and buttons
B-G2-FP-P/BRASS . . . . . . . . . . . Polished Brass with black trim and buttons
B-G2-FP-P/GLD . . . . . . . . . . . . . . Polished Gold with black trim and buttons
B-G2-FP-S/STEEL . . . . . . . . . . . . Stainless Steel with black trim and buttons
B-G2-FP-PRIMED . . . . . . . . . . . . Primed faceplate to cover with paint or wallpaper
B-G2-FPA . . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
B-G2-FPB . . . . . . . . . . . . . . . . . . . . . Black faceplate and buttons
B-G2-FPW . . . . . . . . . . . . . . . . . . . . White faceplate and buttons
59
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L - M O U N T E D D E S I G N E R K E Y PA D S c o n t i n u e d
New for 2003
B-G3-FP – 3-Gang Designer Series Faceplates
The CNX-B Series Designer Keypads can be fully customized with a wide variety of
designer finishes, and can also accommodate painting, wallpapering and custom laser
engraving.The B-G3-FP Designer Series faceplates allow ganging of any three CNX-B
keypads, replacing the standard faceplates and installing easily without tools.
Available in almond, black, white, black chrome, brushed gold, polished black, polished
brass, polished gold and stainless steel, along with a primed option that accommodates
paint or wallpaper, they allow the CNX-B keypads to enhance any residential or
commercial décor.
ENGRAVING AVAILABLE ON BUTTONS ONLY
B-G3-FP-BLK/CHR . . . . . . . . . . . Black Chrome with black trim and buttons
B-G3-FP-BR/GLD . . . . . . . . . . . . Brushed Gold with black trim and buttons
B-G3-FP-P/BLK . . . . . . . . . . . . . . Polished Black with black trim and buttons
B-G3-FP-P/BRASS . . . . . . . . . . . Polished Brass with black trim and buttons
B-G3-FP-P/GLD . . . . . . . . . . . . . . Polished Gold with black trim and buttons
B-G3-FP-S/STEEL . . . . . . . . . . . . Stainless Steel with black trim and buttons
B-G3-FP-PRIMED . . . . . . . . . . . . Primed faceplate to cover with paint or wallpaper
B-G3-FPA . . . . . . . . . . . . . . . . . . . . . Almond faceplate and buttons
B-G3-FPB . . . . . . . . . . . . . . . . . . . . . Black faceplate and buttons
B-G3-FPW . . . . . . . . . . . . . . . . . . . . White faceplate and buttons
60
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L B OX D I M M E R S
New for 2003
CLW-1DIM – Wall Box Dimmer
The CLW-1DIM is a self-powered wall box dimmer, which includes an isolated 2-wire nonpolarized Cresnet port. Buttons may report to the control system and be used to control
other functions simultaneously, however the dimmer will also operate stand-alone when
Cresnet data is not available.
New for 2003
CLW-1SW – Wall Box Switch
The CLW-1SW is a self-powered wall box switch, which includes an isolated 2-wire nonpolarized Cresnet port. Buttons may report to the control system and be used to control
other functions simultaneously, however the switch will also operate stand-alone when
Cresnet data is not available.
New for 2003
CLW-DELV – Electronic Low Voltage Wall Box
The CLW-DELV is a self-powered electronic low voltage wall box switch, which includes an
isolated 2-wire non-polarized Cresnet port. Buttons may report to the control system and
be used to control other functions simultaneously, however the switch will also operate
stand-alone when Cresnet data is not available.
New for 2003
CLW-SLV – Slave Switch Wall Box
for Multiple Point Control
The CLW-SLV is a self-powered slave switch wall box for multiple point control, which
includes an isolated 2-wire non-polarized Cresnet port. Buttons may report to the control
system and be used to control other functions simultaneously, however the switch will
also operate stand-alone when Cresnet data is not available.
61
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L / L E C T E R N M O U N T E D K E Y PA D S A N D AC C E S S O R I E S
CNWM-LT9 – 9-Button Wall Mounted Keypad
The CNWM-LT9 is a 9-button keypad with LED feedback indicators. It features a 1-gang
faceplate with buttons that match the style and colors of LiteTouch® systems.
Power Requirements: . . . . . . . . . . . . . 24 VDC Cresnet Power, Load Factor of 6W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . 1 gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . White, removeable (may be customized with paint or wall coverings)
Feedback Indicators. . . . . . . . . . . . . . . LEDs
Dimensions (HxWxD) . . . . . . . . . . . . . 4.6" (11.68cm) x 2.8" (7.11cm) x 1.2" (3.05cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3 oz/1.00Kg)
OPTIONAL ACCESSORIES
CNWM-LT9-BTW . . . . . . . . . . . . . Engravable buttons for CNWM-LT9,White
CNWM-LU12 – 12-Button Wall Mounted Keypad
The CNWM-LU12 is a 12 button keypad with 10 LED feedback indicators. It features a
1-gang faceplate with buttons that match the style and colors of Lutron systems.
Power Requirements . . . . . . . . . . . . . . 24 VDC Cresnet Power, Load Factor of 2W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . 1 gang
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . White, removeable (may be customized with paint or wall coverings)
Feedback Indicators. . . . . . . . . . . . . . . LEDs (top 10 buttons only)
Dimensions (HxWxD) . . . . . . . . . . . . . 4.6" (11.68cm) x 2.7" (6.86cm) x 1.2" (3.05cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 oz/0.84Kg)
OPTIONAL ACCESSORIES
CNWM-LU12-FPW . . . . . . . . . . . Engravable faceplate for CNWM-LU12-FPW, White
CNWM-10A – Wall Mounted Keypad
with Variable layout
The CNWM-10A is a wall-mounted keypad that may be customized with engraving and
variable layout, including from 1 to 10 buttons. Attractive enough for the home, it is also
durable enough for commercial applications.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (10) maximum, with LED indicators
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Wall mount; (1) 1-gang electrical box
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 5W
Dimensions (HxW). . . . . . . . . . . . . . . . 4.62" (11.73cm) x 2.86" (7.26cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.61lb (0.27Kg)
MODEL OPTIONS:
All the features of the CNWM-10A, with the following exceptions:
CNWM-29A:
Buttons . . . . . . . . . . . . . . . . . . . . . (29) maximum, with LED indicators
Enclosure . . . . . . . . . . . . . . . . . . . . (1) 2-gang electrical box
Cresnet Power Factor. . . . . . . . . . 5.5W
Dimensions (HxW). . . . . . . . . . . . . . . . 4.62" (11.73cm) x 4.62" (11.73cm)
Weight . . . . . . . . . . . . . . . . . . . . . . 0.5lb (0.23Kg)
OTHER OPTIONS:
Optional panel finishes and trims, plus button colors and configurations are available.
Custom panel engraving also Included.
62
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L / L E C T E R N M O U N T E D K E Y PA D S A N D AC C E S S O R I E S c o n t . .
CNWMBG-10A – 10 Button Wall Mounted Keypad
with Bargraph
The CNWMBG-10A is a wall-mounted keypad that may be customized with engraving
and variable layout, including from 1 to 10 buttons. It also includes a bargraph that
provides immediate feedback functions such as for room lighting or audio volume.
Attractive enough for the home, is also durable enough for commercial applications.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (10) maximum, with LED indicators
Bargraph . . . . . . . . . . . . . . . . . . . . . . . . (1) 10-segment LED bargraph
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Wall mount; (1) 1-gang electrical box
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 6W
Dimensions (HxW). . . . . . . . . . . . . . . . 4.62" (11.74cm) x 2.86" (7.26cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.36lb (0.16Kg)
OTHER OPTIONS:
Optional panel finishes and trims, plus button colors and configurations are available.
Custom faceplate engraving also Included.
CNWMBG2-34A – 34 Button Wall Mounted Keypad
with Bargraphs
The CNWMBG2-34A is a wall-mounted keypad that may be customized with engraving and
variable layout, including from 1 to 34 buttons. It also includes two bargraphs that provide
immediate feedback functions such as for lighting or audio. It is ideal for controlling complex
AV and environmental functions in a boardroom, conference room or auditorium.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (34) maximum, with LED indicators
Bargraph . . . . . . . . . . . . . . . . . . . . . . . . (2) 10-segment LED bargraphs
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Wall mount, (1) 4-gang electrical box
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 7W
Dimensions (HxW). . . . . . . . . . . . . . . . 4.63" (11.76cm) x 8.32" (21.13cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.32 lbs (0.4Kg)
OTHER OPTIONS:
Optional panel finishes and trims, plus button colors and configurations are available.
Custom faceplate engraving also Included.
63
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L / L E C T E R N M O U N T E D K E Y PA D S A N D AC C E S S O R I E S c o n t . .
New for 2003
CNX-BF12W – 12-Button Wall Mounted
Function Keypad
The CNX-BF12W is a wall-mounted user interface device ideally suited to control the CNXPAD8A professional audio distribution processor and audio source devices. It consists of
six source buttons, an on/off button, mute button, volume controls and basic device
control buttons.
Power Requirements: . . . . . . . . . . . . . 24 VDC, 0.125A, 3 Watts
Default Network ID: . . . . . . . . . . . . . . . 60
Wave File Format/Size Limit . . . . . . . 8-bit, 8Khz, PCM/512K total capacity, max. of 101 WAV files
Control System Update Files1, 2, 3
2-Series Control System Update . . . . Version C2-1001.CUZ or later
CEN/CN-TVAV Update File . . . . . . . . . Version 5.10.13V.UPZ or later
CNMSX-AV/Pro Update File . . . . . . . . Version 5.10.11X.UPZ or later
CNRACKX/-DP Update File . . . . . . . . . Version 5.10.11W.UPZ or later
ST-CP Update File . . . . . . . . . . . . . . . . Version 4.01.04S.UPZ or later
Dimensions (HxWxD) . . . . . . . . . . . . . 4.76” (12.1 cm), 2.91” (5.57 cm), 1.54” (3.90 cm)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 2.60 oz (75 g)
MODEL OPTIONS:
All the features of the CNX-BF12W, with the following exceptions:
CNX-BF12A:
Buttons……………………………...Almond
CNX-BF12B :
Buttons…………………………….. Black
New for 2003
CNX-BN12B – 12-Button Wall Mounted
Numeric Keypad
The CNX-BN12W is a wall-mounted user interface device ideally suited to control the
CNX-PAD8A professional audio distribution processor and audio source devices. Used as
an optional numeric keypad in addition to the CNX-BF12W source keypad, it is ideal for
functions such as selecting a disc from a large volume CD changer
Power Requirements: . . . . . . . . . . . . . 24 VDC, 0.125A, 3 Watts
Default Network ID: . . . . . . . . . . . . . . . 60
Wave File Format/Size Limit . . . . . . . 8-bit, 8Khz, PCM/512K total capacity, max. of 101 WAV files
Control System Update Files1, 2, 3
2-Series Control System Update . . . . Version C2-1001.CUZ or later
CEN/CN-TVAV Update File . . . . . . . . . Version 5.10.13V.UPZ or later
CNMSX-AV/Pro Update File . . . . . . . . Version 5.10.11X.UPZ or later
CNRACKX/-DP Update File . . . . . . . . . Version 5.10.11W.UPZ or later
ST-CP Update File . . . . . . . . . . . . . . . . Version 4.01.04S.UPZ or later
Dimensions (HxWxD) . . . . . . . . . . . . . 4.76”(12.1 cm), 2.91”(5.57 cm), 1.54” (3.90 cm)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 2.60 oz (75 g)
MODEL OPTIONS:
All the features of the CNX-BN12W, with the following exceptions:
CNX-BN12A:
Buttons……………………………...Almond
CNX-BN12W :
Buttons…………………………….. White
64
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L / L E C T E R N M O U N T E D K E Y PA D S A N D AC C E S S O R I E S c o n t . .
CNWP-32– Lectern Mounted Keypad
The CNWP-32 is a lectern-mounted keypad that may be customized with engraving
and variable layout, including from 1 to 32 buttons. It is ideal for controlling complex
AV and environmental functions in a boardroom, conference room or auditorium.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (32) maximum, with LED indicators
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Lectern mount
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 3W
Dimensions (HxW). . . . . . . . . . . . . . . . 5.50" (13.97cm) x 5.75" (14.61cm )
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.09 lbs (0.5Kg)
MODEL OPTIONS:
All the features of the CNWP-32, with the following exceptions:
CNWP-32B:
Enclosure . . . . . . . . . . . . . . . . . . . . Consolette
Dimensions (HxW). . . . . . . . . . . . 6.04" (15.34cm) x 6.29" (15.98cm)
Weight . . . . . . . . . . . . . . . . . . . . . . 0.93 lb (0.42Kg)
CNWP-64:
Buttons . . . . . . . . . . . . . . . . . . . . . (64) maximum, with LED indicators
Cresnet Power Factor. . . . . . . . . . 5.5W
Dimensions (HxW). . . . . . . . . . . . 5.50" (13.97cm) x 10.75" (27.31cm)
Weight . . . . . . . . . . . . . . . . . . . . . . 1.66 lbs (0.75Kg)
OTHER OPTIONS:
Optional panel finishes, plus button colors and configurations are available.
Custom faceplate engraving also Included.
CNWPBG2-32 – Lectern Mounted Keypad
with Bargraphs
The CNWPBG2-32 is a lectern-mounted keypad that may be customized with engraving
and variable layout, including from 1 to 32 buttons. It also includes two bargraphs that
provide immediate feedback functions such as for lighting and audio. It is ideal for
controlling complex AV and environmental functions in a boardroom, conference room or
auditorium.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (32) maximum, with LED indicators
Bargraph . . . . . . . . . . . . . . . . . . . . . . . . (2) 10-segment LED bargraphs
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Lectern mount
Power Requirements . . . . . . . . . . . . . . 24VDC network power, load factor of 7W
Dimensions (HxW). . . . . . . . . . . . . . . . 5.50" (13.97cm) x 8.25" (20.96cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.31 lbs (0.59Kg)
MODEL OPTIONS:
All the features of the CNWPBG2-32, with the following exceptions:
CNWPBG2-32B:
Enclosure . . . . . . . . . . . . . . . . . . . . Consolette
Dimensions (HxW). . . . . . . . . . . . 6.04" (15.34cm) x 8.79" (22.33cm)
Weight . . . . . . . . . . . . . . . . . . . . . . 1.16 lbs (0.52Kg)
CNWPBG2-64:
Buttons . . . . . . . . . . . . . . . . . . . . . (64) maximum, with LED indicators
Load Factor . . . . . . . . . . . . . . . . . . 6.5W
Dimensions (HxW). . . . . . . . . . . . 5.50" (13.97cm) x 12.5" (31.75cm)
Weight . . . . . . . . . . . . . . . . . . . . . . 1.31 lbs (0.59Kg)
OTHER OPTIONS:
Optional panel finishes, plus button colors and configurations are available.
Custom faceplate engraving also Included.
65
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
WA L L / L E C T E R N M O U N T E D K E Y PA D S A N D AC C E S S O R I E S c o n t . .
CNPI-16B – 16 Button Custom Keypad Interface
The CNPI-16B allows other manufacturers’ keypad to interface with the Crestron network
in the same manner as a Crestron button panel. It accepts up to 16 button inputs and
provides 16 LED output drivers.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . None; circuit board (4 corner holes for mounting)
Connectors:
NETWORK . . . . . . . . . . . . . . . . . . . (1) 4-pin male connector; to Cresnet control network
POWER. . . . . . . . . . . . . . . . . . . . . . (1) 2-pin male connector; to any device requiring power (24 VDC, 500mA)
INPUT . . . . . . . . . . . . . . . . . . . . . . . (1) 20-pin male connector; to custom (non-Crestron) control panel’s
buttons or switches
OUTPUT . . . . . . . . . . . . . . . . . . . . . (1) 20-pin male connector, to LED indicator on custom
(non-Crestron) panel
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates when 24 VDC is supplied to unit from network
ACT . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between network and unit
Output Voltage . . . . . . . . . . . . . . . . . . . 0 (min) to 24 VDC (max)
Output Current per Output. . . . . . . . . 200mA (max) subject to max total current
Output Current (Total). . . . . . . . . . . . . 1A (total for outputs 1-8); 1A (total for outputs 9-16)
Power:
Requirements . . . . . . . . . . . . . . . . 24 VDC network power
Cresnet Power Factor. . . . . . . . . . 15W (average) (approx. 2.5W+1W/incandescent bulb)
(approx. 2.5W+0.5W/LED)
Dimensions (HxWxD) . . . . . . . . . . . . . 2.50" (6.35cm) x 4.60" (11.68cm ) x 0.50" (1.27cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.19lb (0.09Kg)
CNPI-48I – 48 Button Custom Keypad Interface
The CNPI-48I allows other manufacturers’ keypad to interface with the Crestron network
in the same manner as a Crestron button panel. It accepts up to 48 button inputs and
provides 48 incandescent lamp output drivers, plus two bargraph outputs.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal “sandwich”
Connectors:
NETWORK . . . . . . . . . . . . . . . . . . . (1) 4-pin male connector; to Cresnet control network
SWITCH INPUT . . . . . . . . . . . . . . . (2) 26-pin male connectors; to custom (non-Crestron) control panel’s
buttons or switches
INDICATOR OUTPUT . . . . . . . . . . . (2) 26-pin male connectors, to incandescent indicators on custom
(non-Crestron) panel
BARGRAPH . . . . . . . . . . . . . . . . . . (1) 14-pin male connector; drives up to (2) 10-segment bargraphs
LED Indicators:
NET PWR . . . . . . . . . . . . . . . . . . . . Indicates when 24 VDC is supplied to unit from network
ID SELECT. . . . . . . . . . . . . . . . . . . . Indicates communication between unit and network
Output Voltage . . . . . . . . . . . . . . . . . . . 0 (min) to 24 VDC (max)
Output Current per Output. . . . . . . . . 200mA (max) subject to max total current)
Output Current (Total). . . . . . . . . . . . . 1A (total for outputs 1-8, 9-16, 17-24, 25-32, 33-40, 41-48
subject to max total current; 2A (total for all outputs)
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 40W (average) (approx. 2W+1W/incandescent bulb);
(approx. 2W+0.1W/LED) per bulb on LEDs
Dimensions (HxWxD) . . . . . . . . . . . . . 5.80" (14.73cm) x 7.60" (19.30cm) x 1.10" (2.79cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.11 lbs (0.5Kg)
MODEL OPTIONS:
All the features of the CNPI-48I, with the following exceptions:
CNPI-48L: (Used to drive LED indicators)
INDICATOR OUTPUT . . . . . . . . . . . (2) 26-pin male connectors, to LED indicators on custom (non-Crestron) panel
Weight . . . . . . . . . . . . . . . . . . . . . . 1.06lbs (0.48Kg)
66
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
W I R E L E S S K E Y PA D S
All panels include custom engraving, colored switch caps, choice of button configurations and panel
finishes. Requires CNIRGW or CNRFGWA wireless receiver.
CNIRT-32B – Consolette IR Wireless Control Panel
The CNIRT-32B is a low cost, full-function consolette infrared keypad that may be used
as a dedicated wireless controller for audio, video and environmental functions.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (32) maximum
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Consolette; molded plastic
Communications:
Infrared (IR) . . . . . . . . . . . . . . . . . . . . . . 1-way; 64KHz—Requires CNIRGW gateway/receiver
for communication with the Cresnet control network
Power Requirements . . . . . . . . . . . . . . (1) 9VDC alkaline battery; included
Dimensions (HxWxD) . . . . . . . . . . . . . 6.04" (15.34cm) x 6.29" (15.98cm) x 2.0” (5.08cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8lb (0.36Kg)
MODEL OPTIONS:
All the features of the CNIRT-32, with the following exceptions:
CNIRT-48B:
Buttons . . . . . . . . . . . . . . . . . . . . . (48) maximum
Dimensions . . . . . . . . . . . . . . . . . . 6.04" (15.34cm) x 8.79" (22.33cm)
OTHER OPTIONS:
Optional panel finishes, plus button colors and configurations are available.
CNRFT-32A – Consolette RF Wireless Control Panel
The CNRFT-32A is a low cost, full-function consolette radio frequency keypad that may
be used as a dedicated wireless controller for audio, video and environmental functions.
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (32) maximum
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Consolette; molded plastic
Communications:
Radio Frequency (RF). . . . . . . . . . 1-way; 434MHz—Requires CNRFGWA gateway/receiver
for communication with the Cresnet control network
Power Requirements . . . . . . . . . . . . . . (1) 9VDC alkaline battery; included
Dimensions (HxW). . . . . . . . . . . . . . . . 6.04" (15.34cm) x 6.29" (15.98cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.58lb (0.26Kg)
MODEL OPTIONS:
All the features of the CNRFT-32A, with the following exceptions:
CNRFT-48A:
Buttons . . . . . . . . . . . . . . . . . . . . . (48) maximum
Dimensions (HxW). . . . . . . . . . . . 6.04" (15.34cm) x 8.79" (22.33cm)
Weight . . . . . . . . . . . . . . . . . . . . . . 0.81lb (0.37Kg)
OTHER OPTIONS:
Optional panel finishes, plus button colors and configurations are available.
67
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
W I R E L E S S K E Y PA D S c o n t i n u e d
CNIRHT-30 – Handheld IR Wireless Transmitter
The CNIRHT-30 is a compact, lightweight, hand-held wireless infrared transmitter. Used in
conjunction with the CNIRGW receiver, it is ideal to control audio, video and lighting in a
boardroom or conference room.
Communications: . . . . . . . . . . . . . . . . . Infrared (IR); 1-way; 64KHz
Requires CNIRGW gateway/receiver
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . Customized: (30) maximum
Power Requirements . . . . . . . . . . . . . . (1) 9VDC alkaline battery; included
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Molded black plastic
Dimensions (HxWxD) . . . . . . . . . . . . . 6.50" (16.5cm) x 2.75" (6.85cm) x 0.80" (2.03cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.27lb (0.12Kg)
MODEL OPTIONS:
All the features of the CNIRHT-30, with the following exceptions:
CNIRHT-15:
Buttons . . . . . . . . . . . . . . . . . . . . . (15) maximum
OTHER OPTIONS:
Optional panel finishes, plus button colors, engraving and configurations are available.
Custom faceplate engraving also Included.
CNRFHT-30A – Handheld RF Wireless Transmitter
The CNRFHT-30A is a compact, lightweight, hand-held wireless radio frequency
transmitter. Used in conjunction with the CNRFGWA receiver, it is ideal to control audio,
video and lighting in a boardroom or conference room.
Communications . . . . . . . . . . . . . . . . . Radio Frequency (RF); 1-way; 434MHz
Requires CNRFGWA gateway/receiver
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . Customized: (30) maximum
Power Requirements . . . . . . . . . . . . . . (1) 9VDC alkaline battery; included
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Molded black plastic
Dimensions (HxWxD) . . . . . . . . . . . . . 6.50" (16.5cm) x 2.75" (6.85cm) x 0.80" (2.03cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.27lb (0.12Kg)
MODEL OPTIONS:
All the features of the CNRFHT-30A, with the following exceptions:
CNRFHT-15A:
Buttons . . . . . . . . . . . . . . . . . . . . . (15) maximum
OTHER OPTIONS:
Optional panel finishes, plus button colors, engraving and configurations are available.
Custom faceplate engraving also Included.
68
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
W I R E L E S S K E Y PA D S c o n t i n u e d
CNWM – SmartPresenter ™ Wireless Mouse
Crestron’s CNWM (or CNWML with laser pointer) operates with the Cresnet or SmarTouch
control systems. Crestron’s CNWM is the only wireless mouse with (RF) communication,
full keyboard emulation and multi-purpose buttons for AV control. CNWM also may be
used to control multiple computers with the use of multiple CNMK units (the keyboard
and mouse control interface).
The CNWM has a 500' range and is perfect for large auditoriums as well as small
classrooms and boardrooms. Simultaneously use the computer’s existing keyboard and
mouse in conjunction with the CNWM. The CNWML has all the features of the CNWM and
comes with a built-in laser pointer.
Communications:
Radio Frequency (RF) . . . . . . . . . . . . . 1-way; 434MHz; Requires CNRFGWA gateway/receiver when used
with the Cresnet control network * Also used with SmarTouch control processor
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (5) “keypad” buttons (top side); (1) “mouse” button (top side);
(1) “trigger” button (under side)
Power Requirements . . . . . . . . . . . . . . (2) “AAA” alkaline batteries; included
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Molded black plastic
Dimensions (HxWxD) . . . . . . . . . . . . . 5.33" (13.54cm) x 1.78" (4.51cm) x 1.38" (3.51cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . (without batteries) 0.14lbs (0.064Kg)
MODEL OPTIONS:
All the features of the CNWM, with the following exceptions:
CNWML . . . . . . . . . . . . . . . . . . . . . . Wireless RF mouse with laser pointer
Laser Pointer Wavelength . . . . . . 670nm (Class IIIa Product)
Output Power . . . . . . . . . . . . . . . . Less than 5mW
Dimensions . . . . . . . . . . . . . . . . . . 6.04" (15.33cm) x 1.78" (4.51cm) x 1.36" (3.46cm)
69
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
C O N T R O L PA N E L S a n d K E Y PA D S
W I R E L E S S C O N T R O L PA N E L R E C E I V E R S
CNIRGW – 1-Way IR Receiver
The CNIRGW gateway/receiver allows IR communication from a Crestron
1-way wireless IR transmitter to the control network.
Communications . . . . . . . . . . . . . . . . . Infrared (IR) 1-way; 64KHz
Communications Ports . . . . . . . . . . . . NET (1) 4-pin male connector; to Cresnet control network
LED Indicators. . . . . . . . . . . . . . . . . . . . (1) LED, visible through lens
Power Requirements . . . . . . . . . . . . . . 24VDC network power, load factor of 3W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Mounts in single-gang electrical box; ivory wall plate included
Dimensions (HxW). . . . . . . . . . . . . . . . 4.60" (11.68cm) x 2.75" (6.99cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.43lb (0.2Kg)
CNRFGWA – 1-Way RF Receiver
The CNRFGWA gateway/receiver allows RF communication from a Crestron
1-way wireless RF transmitter to the control network.
Communications . . . . . . . . . . . . . . . . . Radio Frequency (RF) 1-way; 434MHz
Communications Ports . . . . . . . . . . . . NET (1) 4-pin male connector; to Cresnet control network
LED Indicators:
SIGNAL. . . . . . . . . . . . . . . . . . . . . . Indicates reception of valid (RF) signal
ID SELECT. . . . . . . . . . . . . . . . . . . . Indicates established communication between unit and
Cresnet control system
NET PWR . . . . . . . . . . . . . . . . . . . . Indicates 24VAC power supplied from Cresnet control network
Power Requirements . . . . . . . . . . . . . . 24VDC network power, load factor of 3W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Dimensions (HxWxD) . . . . . . . . . . . . . 7.28" (18.49cm) x 3.25" (8.25cm) x 1.35" (3.44cm)
Antenna Length . . . . . . . . . . . . . . . . . . 7.90" (20.1cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 lbs (0.5Kg)
70
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S
New for 2003
CNX-DVP4 – Digital Video Processor
The CNX-DVP4 is a digital video-processor, touchpanel interface, and stand alone 2-Series
control processor that can display up to 4 real-time video/computer windows
simultaneously on a single high-resolution monitor, projector or plasma screen. Ideal for
presentations, distance learning, and command and control centers, the DVP4 combines a
unique set of features to deliver a complete presentation solution.
Incorporating 4 DVI-I inputs, the DVP4 has the capability to accept any combination of
4 analog RGB computer sources up to 1600 x 1200 resolution, or 4 DVI digital visual
interface digital computer sources up to 1280 x 1024 resolution.
Multiple video formats can be processed through the 8 BNC inputs on the DVP4. Any
combination of composite NTSC/PAL or S-Video (Y/C) sources can be fed to the unit
simultaneously.
The sum of the inputs creates a 12 input x 4 video window seamless matrix switch for the
ultimate in professional video switching. Combined with seamless switching, the DVP4
also incorporates digital transition effects - fades, reveals, and pans can be applied to
video windows with software definable timing for each event. Each video window can be
scaled and positioned in a virtually unlimited configuration. Graphics can be incorporated
in the foreground or background in combination with the windows, and with built-in
alpha channel support, corporate icons and dynamic text can be placed over the video
windows in a translucent format.
A DVI-I output provides the option of running analog RGB or DVI digital video to the
display of your choice.The output can be scaled for analog RGB non-interlaced resolutions
from 800 x 600 to 1600 x 1200 as well as interlaced HDTV format 1080i.The DVI digital
visual interface output can be scaled from 800 x 600 to 1280 x 1024 and supports HDTV
1080i as well.
When used in either analog RGB or DVI mode, all output resolutions support 4:3 and 16:9
aspect ratios to best match the display device.
By adding a touch sensitive overlay to the output display, the DVP4 transforms into a
Crestron touchpanel. It is compatible with overlays such as the Smart Matisse™, Elo™,
3M™ and even accepts Microsoft™ Serial Mouse pointing devices for control.Touchpanel
graphics, video window layouts, and effects, are all programmed using Crestron’s VTPRO-e
Microsoft Windows-based graphics development software.
Crestron’s breakthrough 2-Series control engine with the hot new 257 MIPS, 32-bit
Motorola ColdFire® processor and TYPE II complact flash memory slot is at the core of the
DVP4.The control engine allows the DVP4 to be used as a stand-alone master control
system running control logic to support any of Crestron’s network devices in the same
format as all the 2-Series control systems.The DVP4 is also capable of running in slave
mode so that it can be used with an existing 2-Series control system in a similar fashion to
a standard Isys™ touchpanel.
Four included RS-232 control ports can be programmed to control external devices such
as plasma screens, video conferencing codecs, or used as Touch-the-PC ports to allow the
user to touch through the computer window displayed onscreen and control any
Windows-based PC.To round out the package, a 10/100 Ethernet port with built-in Web
Server provides the ultimate in e-Control help desk functions and high speed
communications.
The DVP4 combines the latest in video processing technology with incredible graphic and
control features to provide a powerful solution for any application where high resolution
video and graphics are required.
DVP4 continued on next page
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
71
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
DVP4 continued from previous page
Switcher: . . . . . . . . . . . . . . . . . . . . . . . . Seamless - 12 Inputs x 4 Windows to One display output
Inputs:
Digital sampling: . . . . . . . . . . . . . 24 bit, 8 bits per color.
General Input selection: . . . . . . . Up to 4 RGB computers and 4 S-Video (or 8 Composite) video, any
combination of up to 4 sources displayed simultaneously on the
output.
RGB Input: . . . . . . . . . . . . . . . . . . . . . . . 4 DVI-I/Analog connectors for RGB (RGBHV, RGBS and RGsB
supported)/LVDS Digital
Non-interlaced analog sources: 640 x 480 (60-85Hz),
800 x 600 (60-85Hz)
832 x 624 (60-85Hz),
848 x 480 (60-85Hz)
852 x 480 (60-85Hz),
1024 x 768 (60-85Hz)
1152 x 864 (60-85Hz),
1280 x 768 (60-85Hz)
1280 x 960 (60-85Hz),
1280 x 1024 (60-85Hz)
1360 x 765 (60-85Hz),
1365 x 768 (60-85Hz)
1365 x 1024 (60-85Hz),
1600 x 1200 (60-75Hz)
Interlaced analog sources: . . . . . 1080i (1920 x 1080) (30Hz)
Minimum/maximum levels: . . . .5V to 1.5V p-p with built-in DC restoration.
Impedance: . . . . . . . . . . . . . . . . . . 75 ohms
Input sync type: . . . . . . . . . . . . . . Autodetect RGBHV, RGBS, RGsB
Input level: . . . . . . . . . . . . . . . . . . 3.0V to 5.0V p-p
Input impedance: . . . . . . . . . . . . 1k ohms
Max input voltage: . . . . . . . . . . . 5.0V p-p
DVI digital sources:. . . . . . . . . . . . 640 x 480 (60-85Hz),
800 x 600 (60-85Hz)
832 x 624 (60-85Hz),
848 x 480 (60-85Hz)
852 x 480 (60-85Hz),
1024 x 768 (60-85Hz)
1152 x 864 (60-85Hz),
1280 x 768 (60-85Hz)
1280 x 960 (60Hz),
1280 x 1024 (60Hz)
Video input: . . . . . . . . . . . . . . . . . . . . . 8 BNC connectors shared for 8 NTSC/PAL Composite sources or 4
S-Video (Y/C) sources - mix and match any combination using the 8
BNC inputs.
Minimum/maximum levels: . . . .5V to 1.5V p-p with built-in DC restoration
Impedance: . . . . . . . . . . . . . . . . . . 75 ohms
TBC: . . . . . . . . . . . . . . . . . . . . . . . . Internal TBC with Genlock to any active external source (software
definable).
Outputs:
Color Depth: . . . . . . . . . . . . . . . . . 32-Bit/pixel 24-bit color + 8-bit alpha channel, 24-Bit Video/Graphics
Output interface: . . . . . . . . . . . . 1 DVI-I connector for output display of analog RGB /LVDS Digital Video
Supported Aspect Ratios with any output resolution listed below:
4:3, 16:9
Output resolutions: . . . . . . . . . . . Non-Interlaced analog RGB/DVI output:
800 x 600 (60-85Hz)
1024 x 768 (60-85Hz)
720p (1280 x720, 60Hz)
1280 x 1024 (60-85Hz)
1365 x 768 (60-85Hz)
1600 x 1200 (60Hz)
Interlaced analog
RGB/DVI output:. . . . . . . . . . . . . . 1080i HDTV (1920 x 1080
Output Sync:
Output type: . . . . . . . . . . . . . . . RGBHV, RGBS
Output level: . . . . . . . . . . . . . . . TTL, 5.0V p-p
Polarity: . . . . . . . . . . . . . . . . . . . Composite sync, negative
H/V: . . . . . . . . . . . . . . . . . . . . . . . User-selectable
Effects: . . . . . . . . . . . . . . . . . . . . . . All video windows support fades, reveals, and pans with user definable
timing. Text, buttons, and graphics can be overlaid on video/computer
windows.
Processor:
CPU: . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed: . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory: . . . . . . . . . . . . . . . . . . . . . . . 4 MB FLASH for Program File, 32MB RAM, 32 MB Compact Flash Card
(Included) for Graphics/Webserver - Expandable up to 4GB (accessible
on rear panel - accepts standard Type II compact flash or IBM
Microdrive).
DVP4 continued on next page
72
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
DVP4 continued from previous page
Communication: . . . . . . . . . . . . . . . . . 4 RS-232 ports (DB-9) for interfacing with PC Mouse Control,
Telestrator or AV devices
1 RS-232 port for Programming/Console
1 RS-232 port for external pointing device/
user interface.
User Interface: . . . . . . . . . . . . . . . . . . . Accepts a variety of pointing devices, including a Microsoft™compatible serial mouse, and touch-sensitive screen overlays from
other manufacturers like SMART Matisse™, 3M™ and Elo
TouchSystems™
Cresnet port: . . . . . . . . . . . . . . . . . . . . Operates in Master Mode to support Cresnet Peripherals when used as
a stand-alone control system.
Operates in slave mode when used with any
2-Series control system.
Ethernet: . . . . . . . . . . . . . . . . . . . . . . . . RJ45 for auto-sensing 10/100 BaseT Ethernet, dynamic/static IP, and full
duplex TCP/IP, UDP/IP, Built-In web server
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V from Cresnet, 50W power factor (requires external CNPWS-75 not
included).
Environmental:
Operating temperature: . . . . . . . 5 to 45°C
Humidity: . . . . . . . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
Enclosure: . . . . . . . . . . . . . . . . . . . Black Metal
Dimensions (HxWxD) . . . . . . . . . . . . . 3.5” (8.9cm) x 19” (48.3cm) x 11.5” (29.1cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 lbs. (3.6 kg)
Included Connectors:. . . . . . . . . . . . . . DVI/VGA adapter kit Contains 5 adapters which convert DVI inputs to
15-pin VGA analog inputs.
INCLUDED ACCESSORIES
DVI/VGA ADAPTER KIT . . . . . Contains 5 adapters which convert DVI inputs to 15-pin VGA
analog inputs (Included)
73
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S
New for 2003
PRO2 – Professional Dual Bus Control System
At the heart of the PRO2 control system is the breakthrough 2-Series Control Engine,
based on the hot new 257 MIPS, 32-bit Motorola ColdFire® processor. Its unique Dual Bus
architecture lets you upgrade to new, higher performance expansion cards, while still
using your existing cards and software programs.The 40Mb/s Y-Bus supports existing CNX
control cards and serves as the pipeline for IR, serial communications and relays.The
300Mb/s Z-Bus is designed for super high-speed control card applications such as 10/100
Ethernet, USB, USBII, FireWire, disk drive arrays and more. And onboard 36MB memory is
enhanced with a 4GB expansion slot that supports off-the-shelf Type II compact flash
memory and the IBM Microdrive® hard disk drive, for on-board storage of program and
touchpanel files, room and equipment profiles, upgrades, databases and schedules.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory:
On-board Memory . . . . . . . . . . . . 36MB
Expandable Memory . . . . . . . . . . Compact Flash slot up to 4GB (accepts standard Type II Compact Flash
or IBM Microdrive® not included)
Y-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Mb/s parallel communications; built-in 3-slot card cage supports
Crestron’s existing CNX expansion cards and new C2 expansion cards
IR/Serial ports . . . . . . . . . . . . . . . . . . . . 8 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.2MHz
with individual VART per port allowing simultaneous firing of all ports
I/O Versiports . . . . . . . . . . . . . . . . . . . . (8) programmable digital/analog input and digitaloutputs; digital
outputs offer 250mA sync from maximum 24VDC; catchdiodes for use
with real world loads; digital inputs rated for 0-24VDC, 20K ohms input
impedance, logic threshold 1.25VDC; analog inputsrated
0-10VDC, protected to 24VDC maximum, 20K ohms input impedance;
programmable 2K ohms pullup resistor (per pin, software reference to
GND or closure to GND)
Communication ports . . . . . . . . . . . . . 6 bi-directional ports for RS-232/422/485; Ports 3-6 Cresnet Accelerator
ready
Computer console . . . . . . . . . . . . . . . . 1 RS-232 port (accessible from front or rear panel), 9-pin DB9 for
programming with a PC
Cresnet port . . . . . . . . . . . . . . . . . . . . . 1 4-pin male connector, expandable via Cresnet Accelerator, which
increases the effective network speed, fan-out and device addresses by
a factor of 8 for each poll accelerator added to the system.
Relay ports . . . . . . . . . . . . . . . . . . . . . . (8) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
Z-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 300Mb/s parallel communications; 1 expansion card slot. Optional cards
include: C2ENET-1: Single Port 10/100 BaseT Ethernet, C2ENET-2: Dual
Port WAN-LAN-10/100 BaseT Ethernet. Future Support for USB, USBII,
FireWire, or Disc Drive Array.
Ethernet Support . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet, Dynamic/static IP and full duplex TCP/IP, UDP/IP,
Built-in Firewall, Built-in Router, Built-in Network Address Translator
(NAT), Built-in Web Server: Files shared in internal flash or compact
flash card memory (capabilities depending upon which Z-Bus card is
installed)
Operating System . . . . . . . . . . . . . . . . Real-time, preemptive, multitasking kernel, Multi-threaded, FAT32 file
system with long names, Fully compatible with existing SIMPL™
Windows® and SIMPL+™ programs, Enhanced SIMPL+ instruction set
Screen . . . . . . . . . . . . . . . . . . . . . . . . . . Reverse mode (yellow and black) LCD back light; 2 lines, 40 characters
per line
PRO2 continued on next page
74
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
PRO2 continued from previous page
Menu Function Buttons:
PANEL. . . . . . . . . . . . . . . . . . . . . . . Programmable interface offering command text, indirect text, and
hierarchical screen structure
INFO . . . . . . . . . . . . . . . . . . . . . . . . Displays system information including the loaded SIMPL program
MSG . . . . . . . . . . . . . . . . . . . . . . . . Displays system alarms and error messages
TIME . . . . . . . . . . . . . . . . . . . . . . . . Permits alterations to system date and time; access code required
COM . . . . . . . . . . . . . . . . . . . . . . . . Monitors the transmission and reception traffic on each COM port
Menu Selection Buttons:
MENU . . . . . . . . . . . . . . . . . . . . . . . Returns screen display to menu default state
^ . . . . . . . . . . . . . . . . . . . . . . . . . . . Advances the current screen display
V . . . . . . . . . . . . . . . . . . . . . . . . . . . Returns the current screen display to its previous state
BKLT . . . . . . . . . . . . . . . . . . . . . . . . Alters screen and LCD brightness
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Indicates an error message is available from the software feature
buttons
LNK A . . . . . . . . . . . . . . . . . . . . . . . Indicates attachment to LAN (port 1 of Z-Bus card)
ACT A . . . . . . . . . . . . . . . . . . . . . . . Indicates communication over LAN (port 1 of Z-Bus card)
LNK B . . . . . . . . . . . . . . . . . . . . . . . Indicates attachment to LAN (port 2 of Z-Bus card, if dual port card
inserted)
ACT B . . . . . . . . . . . . . . . . . . . . . . . Indicates communication over LAN (port 2 of Z-Bus card, if dual port
card inserted)
COM TXD (A-F) . . . . . . . . . . . . . . . Indicates transmission of data to serial devices attached to respective
COM ports
COM RXD (A-F) . . . . . . . . . . . . . . . Indicates reception of data from serial devices attached to respective
COM ports
COM RTS (A-F) . . . . . . . . . . . . . . . Indicates when unit is ready to receive data from serial devices
attached to respective COM ports
COM CTS (A-F) . . . . . . . . . . . . . . . Indicates when serial device on the respective COM port is ready to
accept data from the unit
IR-SERIAL (A-H). . . . . . . . . . . . . . . Indicates activity on respective IR/SERIAL line
INPUT-OUTPUT (1-8) . . . . . . . . . . Indicates input voltage threshold for respective I/O port exceeded
RELAY (1-8) . . . . . . . . . . . . . . . . . . Indicates respective relay is closed
SLOT (1-3) . . . . . . . . . . . . . . . . . . . Illuminates when card is inserted into slot; flashes when card is active
Power Requirements . . . . . . . . . . . . . . 100-250VAC, 2.3A, 50/60Hz, internal universal 75W power supply.
Depending on the expansion slot load, there is a 50W maximum
load rating
Dimensions (HxWxD) . . . . . . . . . . . . . 3.47” ( 8.81cm) x 19.00” (48.26cm) x 9.7” (24.6cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7.25lb (3.3kg)
OPTIONAL ACCESSORIES
CNX-NPA8 . . . . . . . . . . . . . . . . . . . . Allows a large number of Cresnet devices to be controlled by a single
PRO2 while maintaining a high level of reliability and performance.
Connecting to the control processor via a high-speed RS-232 (using
built-in COM ports 3-6) or Ethernet link, it effectively multiplies Cresnet
bandwidth by implementing eight simultaneous Cresnet networks,
each operating at full speed. Multiple units can be used at the same
time for even larger or faster systems.
C2ENET-1 . . . . . . . . . . . . . . . . . . . . Single port ethernet card
C2ENET-2 . . . . . . . . . . . . . . . . . . . . Dual port ethernet card
75
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
AV2 – Economical Dual Bus Control System
At the heart of the AV2 control system is the breakthrough 2-Series Control Engine, based
on the hot new 257 MIPS, 32-bit Motorola ColdFire® processor. Its unique Dual Bus
architecture lets you upgrade to new, higher performance expansion cards, while still
using your existing cards and software programs. Using the optional CAGE2 3-card
expansion cage, the AV2’s 40Mb/s Y-Bus supports existing CNX control cards and serves as
the pipeline for IR, serial communications and relays.The 300Mb/s Z-Bus is designed for
super high-speed control card applications such as 10/100 Ethernet, USB, USBII, FireWire,
disk drive arrays and more. And onboard 36MB memory is enhanced with a 4GB
expansion slot that supports off-the-shelf Type II compact flash memory and the IBM
Microdrive® hard disk drive, for on-board storage of program and touchpanel files, room
and equipment profiles, upgrades, databases and schedules.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory:
On-board Memory . . . . . . . . . . . . 36MB
Expandable Memory . . . . . . . . . . Compact Flash slot up to 4GB (accepts standard Type II Compact Flash
or IBM Microdrive® not included)
Y-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Mb/s parallel communications; optional 3-slot card cage supports
Crestron’s existing CNX expansion cards and new C2 expansion cards
IR/Serial ports . . . . . . . . . . . . . . . . . . . . 8 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.2MHz
with individual VART per port allowing simultaneous firing of all ports
I/O Versiports . . . . . . . . . . . . . . . . . . . . (8) programmable digital/analog input and digitaloutputs; digital
outputs offer 250mA sync from maximum 24VDC; catchdiodes for use
with real world loads; digital inputs rated for 0-24VDC, 20K ohms input
impedance, logic threshold 1.25VDC; analog inputsrated
0-10VDC, protected to 24VDC maximum, 20K ohms input impedance;
programmable 2K ohms pullup resistor (per pin, software reference to
GND or closure to GND)
Communication ports . . . . . . . . . . . . . 6 bi-directional ports for RS-232/422/485; Ports 3-6 Cresnet Accelerator
ready
Computer console . . . . . . . . . . . . . . . . 1 RS-232 port (accessible from front or rear panel), 9-pin DB9 for
programming with a PC
Cresnet port . . . . . . . . . . . . . . . . . . . . . 1 4-pin male connector, expandable via Cresnet Accelerator, which
increases the effective network speed, fan-out and device addresses by
a factor of 8 for each poll accelerator added to the system.
Relay ports . . . . . . . . . . . . . . . . . . . . . . (8) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
Z-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 300Mb/s parallel communications; 1 expansion card slot. Optional cards
include: C2ENET-1: Single Port 10/100 BaseT Ethernet, C2ENET-2: Dual
Port WAN-LAN-10/100 BaseT Ethernet. Future Support for USB, USBII,
FireWire, or Disc Drive Array.
Ethernet Support . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet, Dynamic/static IP and full duplex TCP/IP, UDP/IP,
Built-in Firewall, Built-inRouter, Built-in Network Address Translator
(NAT), Built-in Web Server: Files shared in internal flash or compact
flash card memory (capabilities depending upon which Z-Bus card
is installed)
Operating System . . . . . . . . . . . . . . . . Real-time, preemptive, multitasking kernel, Multi-threaded, FAT32 file
system with long names, Fully compatible with existing SIMPL™
Windows® and SIMPL+™ programs, Enhanced SIMPL+ instruction set
AV2 continued on next page
76
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
AV2 continued from previous page
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Indicates an error message is available from the software feature
buttons
LNK A . . . . . . . . . . . . . . . . . . . . . . . Indicates attachment to LAN (port 1 of Z-Bus card)
ACT A . . . . . . . . . . . . . . . . . . . . . . . Indicates communication over LAN (port 1 of Z-Bus card)
LNK B . . . . . . . . . . . . . . . . . . . . . . . Indicates attachment to LAN (port 2 of Z-Bus card, if dual port card
inserted)
ACT B . . . . . . . . . . . . . . . . . . . . . . . Indicates communication over LAN (port 2 of Z-Bus card, if dual port
card inserted)
Power Requirements . . . . . . . . . . . . . . 100-250VAC, 2.3A, 50/60Hz, internal universal power supply.
Depending on the expansion slot load, there is a 50W maximum
load rating
Dimensions (HxWxD) . . . . . . . . . . . . . 3.47” ( 8.81cm) x 19.00” (48.26cm) x 9.7” (24.6cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 6.75lb (3.1kg)
OPTIONAL ACCESSORIES
CAGE2 . . . . . . . . . . . . . . . . . . . . . . . . 3 Card expansion cage
CNX-NPA8 . . . . . . . . . . . . . . . . . . . . Allows a large number of Cresnet devices to be controlled by a single
AV2 while maintaining a high level of reliability and performance.
Connecting to the control processor via a high-speed RS-232 (using
built-in COM ports 3-6) or Ethernet link, it effectively multiplies Cresnet
bandwidth by implementing eight simultaneous Cresnet networks,
each operating at full speed. Multiple units can be used at the same
time for even larger or faster systems.
C2ENET-1 . . . . . . . . . . . . . . . . . . . . Single port ethernet card
C2ENET-2 . . . . . . . . . . . . . . . . . . . . Dual port ethernet card
77
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
R ACK2 – Dual Bus Control System
with Solutions Card Frame
At the heart of the RACK2 control system is the breakthrough 2-Series Control Engine,
based on the hot new 257 MIPS, 32-bit Motorola ColdFire® processor. Its unique Dual Bus
architecture lets you upgrade to new, higher performance expansion cards, while still
using your existing cards and software programs.The 40Mb/s Y-Bus supports up to 12
CNX control cards in its Solutions Card Frame and serves as the pipeline for IR, serial
communications and relays.The 300Mb/s Z-Bus is designed for super high-speed control
card applications such as 10/100 Ethernet, USB, USBII, FireWire, disk drive arrays and more.
And onboard 36MB memory is enhanced with a 4GB expansion slot that supports offthe-shelf Type II compact flash memory and the IBM Microdrive® hard disk drive, for onboard storage of program and touchpanel files, room and equipment profiles, upgrades,
databases and schedules. And the built-in 8-port Cresnet Expander Hub serves as a
repeater, splitter and wiring block to allow connection of hundreds of additional
controlled devices and extended network cabling runs.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory:
On-board Memory . . . . . . . . . . . . 36MB
Expandable Memory . . . . . . . . . . Compact Flash slot up to 4GB (accepts standard Type II Compact Flash
or IBM Microdrive® not included)
Y-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Mb/s parallel communications
Solutions Card Frame. . . . . . . . . . Built-in 12-slot Solutions Card Frame supports Crestron’s existing CNX
expansion cards and new C2 expansion cards in order to configure the
RACK2 for IR/Serial ports, I/O Versiports, RS-232/422/485, relays, etc
Computer Console . . . . . . . . . . . . 1 RS-232 port (accessible from front or rear panel), 9-pin DB9 for
programming with a PC
Cresnet Expander Hub. . . . . . . . . 8-port CNXHUB serves as repeater, splitter and wiring block
Z-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Mb/s parallel communications; 4 Slot Frame for Optional cards
include: C2ENET-1: Single Port 10/100 BaseT Ethernet, C2ENET-2: Dual
Port WAN-LAN-10/100 BaseT Ethernet. Future Support for USB, USBII,
FireWire, or Disc Drive Array
Ethernet Support . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet, Dynamic/static IP and full duplex TCP/IP, UDP/IP,
Built-in Firewall, Built-in Router, Built-in Network Address Translator
(NAT), Built-in Web Server: Files shared in internal flash or compact
flash card memory (capabilities depending upon which Z-Bus card
is installed)
Operating System . . . . . . . . . . . . . . . . Real-time, preemptive, multitasking kernel, Multi-threaded, FAT32 file
system with long names, Fully compatible with existing SIMPL™
Windows® and SIMPL+™ programs, Enhanced SIMPL+ instruction set
Screen . . . . . . . . . . . . . . . . . . . . . . . . . . Reverse mode (yellow and black) LCD back light; 2 lines, 40 characters
per line
Menu Function Buttons:
PANEL. . . . . . . . . . . . . . . . . . . . . . . Programmable interface offering command text, indirect text, and
hierarchical screen structure
INFO . . . . . . . . . . . . . . . . . . . . . . . . Displays system information including the loaded SIMPL program
MSG. . . . . . . . . . . . . . . . . . . . . . . . Displays system alarms and error messages
TIME . . . . . . . . . . . . . . . . . . . . . . . . Permits alterations to system date and time; access code required
COM . . . . . . . . . . . . . . . . . . . . . . . . Monitors the transmission and reception traffic on each COM port
RACK2 continued on next page
78
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
R ACK2 continued from previous page
Menu Selection Buttons:
MENU . . . . . . . . . . . . . . . . . . . . . . . Returns screen display to menu default state
^ . . . . . . . . . . . . . . . . . . . . . . . . . . . Advances the current screen display
V . . . . . . . . . . . . . . . . . . . . . . . . . . . Returns the current screen display to its previous state
BKLT . . . . . . . . . . . . . . . . . . . . . . . . Alters screen and LCD brightness
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Indicates an error message is available from the software feature
buttons
LNK A . . . . . . . . . . . . . . . . . . . . . . . Indicates attachment to LAN (port 1 of Z-Bus card)
ACT A . . . . . . . . . . . . . . . . . . . . . . . Indicates communication over LAN (port 1 of Z-Bus card)
LNK B . . . . . . . . . . . . . . . . . . . . . . . Indicates attachment to LAN (port 2 of Z-Bus card, if dual port card
inserted)
ACT B . . . . . . . . . . . . . . . . . . . . . . . Indicates communication over LAN (port 2 of Z-Bus card, if dual port
card inserted)
SLOT (1-15) . . . . . . . . . . . . . . . . . . Illuminates when card is inserted into slot; flashes when card is active
Power Requirements . . . . . . . . . . . . . . 24VDC, 12W; requires CNPWS-75 (not included)
Dimensions (HxWxD) . . . . . . . . . . . . . 7.00” (17.8cm) x 19.00” (48.26cm) x 8.50” (21.6cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5lb (4.3kg)
OPTIONAL ACCESSORIES
C2ENET-1 . . . . . . . . . . . . . . . . . . . . Single port ethernet card
C2ENET-2 . . . . . . . . . . . . . . . . . . . . Dual port ethernet card
79
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
CP2 – Compact Fixed Resource Control System
At the heart of the CP2 control system is the breakthrough 2-Series Dual Bus
Control Engine, based on the hot new 257 MIPS, 32-bit Motorola ColdFire®
processor. Like the other models of Crestron 2-Series, the CP2 is built from
the ground up for high performance.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 36MB
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . (3) DB9 for RS-232/422/485
RELAYS . . . . . . . . . . . . . . . . . . . . . . (8) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
INPUT/OUTPUT. . . . . . . . . . . . . . . (8) programmable digital/analog input and digital outputs; digital
outputs offer 250mA sync from maximum 24VDC; catchdiodes for use
with real world‰ loads; digital inputs rated for 0-24VDC, 20K ohms
input impedance, logic threshold 1.25VDC; analog inputs rated
0-10VDC, protected to 24VDC maximum, 20K ohms input impedance;
programmable 2K ohms pullup resistor (per pin, software reference to
GND or closure to GND)
IR ports . . . . . . . . . . . . . . . . . . . . . 8 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.2MHz
with individual UART per port allowing simultaneous firing of all ports
Computer Port . . . . . . . . . . . . . . . 1 RS-232 port,9-Pin DB9 for programming a PC
Cresnet Port . . . . . . . . . . . . . . . . . 1 4-Pin male connector
Power . . . . . . . . . . . . . . . . . . . . . . . 1-jack accepts 24VDC from pw-2420RU power supply(sold seperately),
passes power through to CresNET port
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Green LED, indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED, indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Red LED, indicates an error message is available from the
software feature buttons
Power Requirements . . . . . . . . . . . . . . External 24VDC, 2.0A2, 24W+ power jack or Cresnet connector
(Not Included)
OPTIONAL ACCESSORIES
CNX-NPA8 ..........................................Allows a large number of Cresnet devices to be controlled by a single
CP2 while maintaining a high level of reliability and performance.
Connecting to the control processor via a high-speed RS-232 (using
built-in COM ports 3-6) or Ethernet link, it effectively multiplies Cresnet
bandwidth by implementing eight simultaneous Cresnet networks,
each operating at full speed. Multiple units can be used at the same
time for even larger or faster systems.
80
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
CP2E – Compact Fixed Resource Control System
with Ethernet
At the heart of the CP2E control system is the breakthrough 2-Series Dual Bus Control
Engine, based on the hot new 257 MIPS, 32-bit Motorola ColdFire® processor. Like the
other models of Crestron 2-Series, the CP2E is built from the ground up for high
performance and high speed Internet communications.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 36MB
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . (3) DB9 for RS-232/422/485
RELAYS . . . . . . . . . . . . . . . . . . . . . . (8) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
INPUT/OUTPUT. . . . . . . . . . . . . . . (8) programmable digital/analog input and digital outputs; digital
outputs offer 250mA sync from maximum 24VDC; catch diodes for use
with “real world” loads; digital inputs rated for 0-24 VDC, 20K ohms
input impedance, logic threshold 1.25VDC; analog inputs rated
0-10VDC, protected to 24VDC maximum, 20K ohms input impedance;
programmable 2K ohms pullup resistor (per pin, software reference to
GND or closure to GND)
IR ports . . . . . . . . . . . . . . . . . . . . . 8 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.2MHz
with individual UART per port allowing simultaneous firing of all ports
Ethernet. . . . . . . . . . . . . . . . . . . . . RJ45 for 10/100 BaseT Ethernet, dynamic/static IP and full duplex
TCP/IP, UDP/IP, Built-In webserver
Computer Port . . . . . . . . . . . . . . . 1 RS-232 port,9-Pin DB9 for programming a PC
Cresnet Port . . . . . . . . . . . . . . . . . 1 4-Pin male connector
Power . . . . . . . . . . . . . . . . . . . . . . . 1-jack accepts 24VDC from pw-2420RU power supply(sold seperately),
passes power through to CresNET port
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Green LED, indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED, indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Red LED, indicates an error message is available from the software
feature buttons
LNK . . . . . . . . . . . . . . . . . . . . . . . . Red LED, indicates attachment to LAN
ACT . . . . . . . . . . . . . . . . . . . . . . . . Red LED, indicates communication over LAN
Power Requirements . . . . . . . . . . . . . . External 24VDC, 2.0A 2, 24W+ power jack or Cresnet connector
(Not Included)
OPTIONAL ACCESSORIES
CNX-NPA8 ..........................................Allows a large number of Cresnet devices to be controlled by a single
CP2E while maintaining a high level of reliability and performance.
Connecting to the control processor via a high-speed RS-232 (using
built-in COM ports 3-6) or Ethernet link, it effectively multiplies Cresnet
bandwidth by implementing eight simultaneous Cresnet networks,
each operating at full speed. Multiple units can be used at the same
time for even larger or faster systems.
81
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
New for 2003
PAC2 – Automation Control System
with Ethernet
The PAC2 Control System is designed especially for mounting in Crestron’s automation
cabinet enclosures. At the heart of the PAC2 control system is the breakthrough 2-Series
Control Engine, based on the hot new 257 MIPS, 32-bit Motorola ColdFire® processor. Its
unique Dual Bus architecture lets you upgrade to new, higher performance expansion
cards, while still using your existing cards and software programs.The 40Mb/s Y-Bus
supports existing CNX control cards as well as new C2 expansion cards and serves as the
pipeline for IR, serial communications and relays.The 300Mb/s Z-Bus is designed for super
high-speed control card applications such as 10/100 Ethernet, USB, USBII, FireWire and
more. And onboard 36MB memory is enhanced with a 4GB expansion slot that supports
off-the-shelf Type II compact flash memory and the IBM Microdrive® hard disk drive, for
on-board storage of program and touchpanel files, room and equipment profiles,
upgrades, databases and schedules.
Processor:
CPU . . . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory:
On-board Memory . . . . . . . . . . . . . 36MB
Expandable Memory . . . . . . . . . . . Compact Flash slot up to 4GB (accepts standard Type II Compact Flash
not included)
Y-Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Mb/s parallel communications; 2 slots for Crestron’s existing CNX I/O
expansion cards or new C2 expansion cards
Z-Bus:. . . . . . . . . . . . . . . . . . . . . . . . . . . 300Mb/s parallel communications; 1 expansion card slot. Optional cards
include: C2ENET-1: Single Port 10/100 BaseT Ethernet, C2ENET-2: Dual
Port WAN-LAN-10/100 BaseT Ethernet. Future Support for USB, USBII,
FireWire, or Disc Drive Array.
Ethernet Support . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet, Dynamic/static IP and full duplex TCP/IP, UDP/IP,
optional Firewall, Router, Network Address Translator (NAT), Built-in
Web Server.
Connectors:
RELAYS . . . . . . . . . . . . . . . . . . . . . . . (8) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
INPUT/OUTPUT . . . . . . . . . . . . . . . . (8) programmable digital/analog input and digital outputs; digital
outputs offer 250mA sync from maximum 24VDC; catch diodes for use
with “real world” loads; digital inputs rated for 0-24 VDC, 20K ohms
input impedance, logic threshold 1.25VDC; analog inputs rated 010VDC, protected to 24VDC maximum, 20K ohms input impedance;
programmable 2K ohms pullup resistor (per pin, software reference to
GND or closure to GND)
Cresnet ports . . . . . . . . . . . . . . . . . . (1) connector on CPU card plus (8) groups of (4) connectors on top
plate (32 total); each group is from a separate port on an internal 8port Cresnet Expander Hub. (2) 5-position connectors for Cresnet
signals and an additional Override contact closure signal.
Override input . . . . . . . . . . . . . . . . . (1) 3-position mini-phoenix connector for external contact closure
inputs (connects directly to the 5-position Cresnet connectors)
Cresnet backup . . . . . . . . . . . . . . . . (1) 5-position connector for backup computer to automatically take
control of the Cresnet network upon failure of the internal computer
Computer port . . . . . . . . . . . . . . . . RS-232 port on CPU card for console use.
PAC2 continued on next page
82
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
2 - S E R I E S C O N T R O L S YS T E M S c o n t i n u e d
PAC2 continued from previous page
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates an error message is available from the software feature
buttons
LAN A – LNK + ACT . . . . . . . . . . . . Indicates attachment to and communication over LAN (port 1 of Z-Bus
card)
LAN B – LNK + ACT . . . . . . . . . . . . Indicates attachment to and communication over LAN (port 2 of Z-Bus
card, if dual port card inserted)
Cresnet Activity. . . . . . . . . . . . . . . . (8) LEDs indicate Cresnet segment activity
Cresnet PWR . . . . . . . . . . . . . . . . . . (4) LEDs indicate Cresnet power supplied to the unit
RUN. . . . . . . . . . . . . . . . . . . . . . . . . . Indicates the built-in Cresnet backup processor is operating
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in A/C to 24V, 75Wpower supply for internal functions;
(4) 3-position mini-phoenix connectors for flexible power distribution.
OPTIONAL ACCESSORIES
CNX-NPA8 . . . . . . . . . . . . . . . . . . . . Allows a large number of Cresnet devices to be controlled by a single
PAC2 while maintaining a high level of reliability and performance.
Connecting to the control processor via a high-speed RS-232 (using
built-in COM ports 3-6) or Ethernet link, it effectively multiplies Cresnet
bandwidth by implementing eight simultaneous Cresnet networks,
each operating at full speed. Multiple units can be used at the same
time for even larger or faster systems.
C2ENET-1 . . . . . . . . . . . . . . . . . . . . Single port ethernet card
C2ENET-2 . . . . . . . . . . . . . . . . . . . . Dual port ethernet card
New for 2003: Call Crestron True Blue Support for more information on specifications and availability
83
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C N X C O N T R O L S YS T E M S
CNR ACKX – Modular Integrated Control System
The CNRACKX is a modular “card cage” control system offering tremendous
flexibility and customization. CNRACKX provides (15) expansion card slots, plus Crestron’s
exclusive DPA (Direct Processor Access) port for LAN/Ethernet expansion.The CNRACKX
includes a CNX-CPU processor with the cage. And Crestron’s exclusive Direct Processor
Access (DPA) port provides a direct link to any LAN
or Internet connection via high speed Ethernet.
Processor
Processing Speed . . . . . . . . . . . . . 4MIPS
Connectors on CNXCPU:
CRESNET . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector and (1) 4-pin male connector;
for expansion to Cresnet or SmarTouch peripherals; total maximum
load rating depends on expansion slot load
COMPUTER . . . . . . . . . . . . . . . . . . (1) 9-pin DB9 female connector for programming with a PC;
modem compatible, null modem cable not supplied
CNX Card Slots:
DPA. . . . . . . . . . . . . . . . . . . . . . . . . Direct Processor Access expansion slot for optional local area
network (LAN) interface card CNXENET+, which requires field
installation and has (1) 8-wire RJ45 connector on CNXCPU for
communication access
Other (1-15) . . . . . . . . . . . . . . . . . (15) open “card cage” slots accept any combination of
CNX Expansion Cards
LED Indicators on CNXCPU:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates CNXCPU is processing data or communicating with system hardware
LED Indicators on front panel:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates CNXCPU is processing data or communicating with system hardware
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Indicates an error condition is detected by the CNXCPU
Ethernet RXD . . . . . . . . . . . . . . . . Indicates reception of Ethernet data
Ethernet TXD. . . . . . . . . . . . . . . . . Indicates transmission of Ethernet data
Ethernet LNK. . . . . . . . . . . . . . . . . Indicates attachment to Ethernet network
Ethernet ERR . . . . . . . . . . . . . . . . . Indicates Ethernet protocol error
SLOT (1-15) . . . . . . . . . . . . . . . . . . Illuminates when card is inserted into slot; flashes when card is active
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Permits physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Depress in combination with the HW-R button to perform an overload/reset
Screen . . . . . . . . . . . . . . . . . . . . . . . . . . (1) reverse mode (yellow and black) LED back light; (2) lines,
(40) characters per line
Menu Function Buttons:
PANEL. . . . . . . . . . . . . . . . . . . . . . . Programmable interface offering command text, indirect text, and
hierarchical screen structure
INFO . . . . . . . . . . . . . . . . . . . . . . . . Displays system information including the loaded SIMPL program
MSG . . . . . . . . . . . . . . . . . . . . . . . . Displays system alarms and error messages
TIME . . . . . . . . . . . . . . . . . . . . . . . . Permits alterations to system date and time; access code required
COM . . . . . . . . . . . . . . . . . . . . . . . . Monitors the transmission and reception traffic on each COM port
Menu Selection Buttons:
MENU . . . . . . . . . . . . . . . . . . . . . . . Returns screen display to menu default state
^ . . . . . . . . . . . . . . . . . . . . . . . . . . . Scrolls listed information up
v . . . . . . . . . . . . . . . . . . . . . . . . . . . Scrolls listed information down
BKLT . . . . . . . . . . . . . . . . . . . . . . . . Adjusts LCD backlight and LED indicator brightness
Power Requirements . . . . . . . . . . . . . . 24VDC; requires CNPWS-75; not included
multiple CNPWS-75 power supplies may be required, depending
upon total load
Dimensions (HxWxD) . . . . . . . . . . . . . 5.20" (13.21cm) x 19.00" (48.26cm) x 8.31" (21.12cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0lbs (3.6Kg)
84
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C N X C O N T R O L S YS T E M S c o n t i n u e d
CEN-T VAV – 10BaseT Ethernet Programmable
TV/AV Controller
The CEN-TVAV is an Ethernet-based remote television/audio-visual (TV/AV) controller for
devices such as TVs,VCRs, switchers and DVD players. Communicating via standard
Internet protocol, it provides a complete programmable control system in an economic
package. CEN-TVAV includes an IR port that can support up to five discrete AV devices, four
Versiports for digital input, digital output, or analog input, for controlling or monitoring
external equipment, an RS-232 port, a current sensor, a Cresnet port and an IR receiver for
use with a handheld remote.
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV power-in cord is plugged into an
energized VAC outlet.
NET . . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when communication with the Cresnet system is occurring or
while processing commands from the PC (i.e., uploading programming).
ETHERNET:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during reception of Ethernet data.
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during transmission of Ethernet data.
LNK . . . . . . . . . . . . . . . . . . . . . . Illuminates when there are attachments to the Ethernet network.
ERR . . . . . . . . . . . . . . . . . . . . . . Illuminates when an Ethernet protocol error is detected.
INPUT-OUTPUT . . . . . . . . . . . . . . . These four LEDs illuminate while the corresponding input or output
device that is connected to the rear panel I/O is active.
TV/AV:
PWR. . . . . . . . . . . . . . . . . . . . . . Illuminated while the current sensor is detecting that the TV or AV
device connected to the power-out receptacle is ON.
IR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when IR signals are being sent to that device.
Device Power
RS-232:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV is receiving serial data from the RS-232 port.
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV is sending data to the RS-232 port.
IR IN . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV receives a valid IR code from an
optional handheld transmitter.
PORTS:
ETHERNET . . . . . . . . . . . . . . . . . . . This 8-pin, 8-position RJ45 port connects the CEN-TVAV to a 10BaseT
Ethernet/LAN or WAN via a hub.
CRESNET . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector and (1) 4-pin male connector;
for expansion to Cresnet or SmarTouch peripherals; total maximum
load rating depends on expansion slot load
RS-232 . . . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used for control of RS-232
peripheral devices and to communicate with a personal computer (PC)
when programming the CEN-TVAV.
I/O (1-4, G). . . . . . . . . . . . . . . . . . . Pins 1-4 of this Versiport may individually be used as programmable digital
inputs, digital outputs, analog inputs, or any combination of each.
IR. . . . . . . . . . . . . . . . . . . . . . . . . . . This 3.5mm mini-jack is used by the STIRP (provided) to control an
attached TV or AV device.
POWER OUT . . . . . . . . . . . . . . . . . This receptacle provides current-sensed AC power to an attached TV or
AV device.
POWER IN . . . . . . . . . . . . . . . . . . . This attached power cord supplies operating AC power to the CENTVAV and the attached TV or AV device.
Function Modes . . . . . . . . . . . . . . . . . . Local Processing Mode, Remote Processing Mode, Mixed Mode
Ethernet Protocols:. . . . . . . . . . . . . . . . TCP/IP, UDP/IP, ICMP (Ping) and CIP
Ethernet Type . . . . . . . . . . . . . . . . . . . . 10BaseT
Power Requirements . . . . . . . . . . . . . . 115VAC, 50-6- Hz, 6.6A maximum
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.63lbs (1.65Kg)
OPTIONAL ACCESSORIES:
ST-SPL . . . . . . . . . . . . . . . . . . . . . . . IR splitter
MODEL OPTIONS:
All the features of the CEN-TVAV, with the following exceptions:
CENI-TVAV . . . . . . . . . . . . . . . . . . International Version; 220V
85
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C O N T R O L S YS T E M S E X PA N S I O N C A R D S
New for 2003
C2ENET-1 – Single Port Ethernet Card
for 2-Series Control Systems
The C2ENET-1 is a 10/100 BaseT half/full duplex Ethernet expansion card for use in the ZBus of the PRO2, AV2, RACK2 and PAC2 2-Series control systems.This single port 10/100
BaseT Ethernet card allows super high-speed ethernet connectivity.
Network Type . . . . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet
Protocols . . . . . . . . . . . . . . . . . . . . . . . . TCP/IP, UDP/IP
Power Requirements . . . . . . . . . . . . . . 2W
FEATURES:
10/100 Autonegotiating, Full/Half Duplex
New for 2003
C2ENET-2 – Dual Port Ethernet Card
for 2-Series Control Systems
The C2ENET-2 is a 10/100 BaseT half/full duplex Ethernet expansion card for use in the
Z-Bus of the PRO2, AV2, RACK2 and PAC2 2-Series control systems.This dual port WANLAN-10/100 BaseT Ethernet card allows super high speed ethernet connectivity, while
activating the control system’s built-in firewall, router and network address translator
(NAT).
Network Type . . . . . . . . . . . . . . . . . . . . 10/100 BaseT Ethernet
Protocols . . . . . . . . . . . . . . . . . . . . . . . . TCP/IP, UDP/IP
Power Requirements . . . . . . . . . . . . . . 3W
FEATURES:
10/100 Autonegotiating, Full/Half Duplex
86
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C O N T R O L S YS T E M S E X PA N S I O N C A R D S c o n t i n u e d
New for 2003
C2IR-8 – IR/Serial Output Card
for 2-Series Control Systems
The C2IR-8 is an 8-port IR output card for use in the Y-Bus of the PRO2, AV2, RACK2 and
PAC2 2-Series control systems. It generates 8 simultaneous IR signals with up to a 1.3MHz
carrier, and can also be used as a serial output port and can generate dynamic data for
most RS-232 compatible devices.
Connectors . . . . . . . . . . . . . . . . . . . . . . 8 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.3MHz
Power Requirements . . . . . . . . . . . . . . 3W
New for 2003
C2COM-3 – RS-232/422/485 Interface
for 2-Series Control Systems
The C2COM-3 features 3 bi-directional RS-232/422/485 ports with hardware
handshaking. It is used to communicate between the 2-Series control system and
projectors, AV switchers or any other RS-232/422/485 device. All ports can communicate
with the Cresnet Poll accelerator.
Connectors . . . . . . . . . . . . . . . . . . . . . . (3) 9-pin DB9 connectors to connect to serial equipment for RS232/422/485 communication
Power Requirements . . . . . . . . . . . . . . 2W
Parameters:
Baud rates . . . . . . . . . . . . . . . . . . . 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,57600 and 115200 bps
Parity . . . . . . . . . . . . . . . . . . . . . . . Even, odd, none or zero stick
Data Bits . . . . . . . . . . . . . . . . . . . . (7) or (8)
Stop Bits. . . . . . . . . . . . . . . . . . . . . (1) or (2)
Handshaking. . . . . . . . . . . . . . . . . Bidirectional RS-232, RS-422, or RS-485 communication with hardware
and software handshaking supported
CNXENET+ – 10BaseT Ethernet Expansion Card with
2 MB Webserver for CNX Control Systems
The CNXENET+ allows connections to Crestron's full line of CNX control systems (CNMSXPRO, CNMSX-AV and CNRACKX) via Ethernet/LAN, Internet and intranet. It features a 2MB
web server, on-board RISC processing and built-in security. Up to 5 users can connect
simultaneously to the control system via web browser. In addition, the CNXENET+ allows
direct TCP/IP communications to third party devices.This expansion card is upgradeable
in the field and connects directly to Crestron's exclusive Direct Processor Access (DPA) slot
to provide direct, high-speed access from any control system device to the system
processor.
Network Type . . . . . . . . . . . . . . . . . . . . 10BaseT
Protocols:. . . . . . . . . . . . . . . . . . . . . . . . TCP/IP, UDP/IP, ICMP, and HTTP
User Licenses . . . . . . . . . . . . . . . . . . . . 5
On-board Web server . . . . . . . . . . . . . 2MB
Connections . . . . . . . . . . . . . . . . . . . . . One 8-wire RJ45 connector for LAN/DPA and one 26-pin male
connector which mates with control system process board or
CNXCPU board.
Power Requirements . . . . . . . . . . . . . . 24VDC Crestnet power, load factor of 4W
Dimensions (HxWxD) . . . . . . . . . . . . . 1.13" (2.86cm) x 2.95" (7.49cm) x 4.55" (11.56cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.13lbs (0.06Kg)
87
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C O N T R O L S YS T E M S E X PA N S I O N C A R D S c o n t i n u e d
CNXIR-8 – IR/Serial output Card for all
Crestron Control Systems
Includes (8) IR/serial ports, which can be used for infrared, ASCII or other serial
communication and control.
Connectors . . . . . . . . . . . . . . . . . . . . . . (1) 16-pin, terminal block, included; containing (8) independent
IR/RS-232/serial output ports; infrared output up to 1.12MHz including
RS-232 with speeds up to 38,400 bps.
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 3W
CNXIO-16 – 16-relay Expansion Card for all
Crestron Control Systems
Features (16) digital/analog inputs and/or digital outputs.
Connectors . . . . . . . . . . . . . . . . . . . . . . (2) 9-pin terminal block; included
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 2W
Ratings:
Digital Output . . . . . . . . . . . . . . . 250mA sync from maximum 24VDC; catch diodes for use
with “real world” loads
Digital Input . . . . . . . . . . . . . . . . . 0-24VDC
Input Impedance . . . . . . . . . . . . . 20K ohms; programmable 2k ohms pullup resistor (per pin, software
reference to GND or closure to GND)
Input Logic Threshold . . . . . . . . . 1.25VDC
Analog Input. . . . . . . . . . . . . . . . . 0-10VDC, protected to 24VDC maximum
CNXAO-8 – Analog Output Card for all
Crestron Control Systems
The CNXAO-8 provides eight individually adjustable analog output channels.
Connectors . . . . . . . . . . . . . . . . . . . . . . 2 5-pin Mini-Phoenix Type
Power Requirements . . . . . . . . . . . . . . 24VDC, network power; 24W maximum
(8W + 2W per fully loaded output)
Voltage Span/Offset . . . . . . . . . . . . . . +/-12VDC
Maximum Source/Sink Current . . . . . 80 mA
Output Resolution . . . . . . . . . . . . . . . . 1024 Levels (10 bit)
CNXCOM-2 – Dual RS-232/422/485 Card for all
Crestron Control Systems
Features (2) bidirectional RX-232/422/485 ports with hardware handshaking;
use with projectors, AV switchers or any RS-232/422/485 device.
Connectors . . . . . . . . . . . . . . . . . . . . . . (2) 9-pin, DB9 connectors; connect to serial equipment for
RS-232/RS-422/RS-485 communication
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 4W
Parameters:
Baud rates . . . . . . . . . . . . . . . . . . . Up to 34,200 bps
Parity . . . . . . . . . . . . . . . . . . . . . . . Even, odd or none
Data Bits . . . . . . . . . . . . . . . . . . . . (7) or (8)
Stop Bits. . . . . . . . . . . . . . . . . . . . . (1) or (2)
Handshaking. . . . . . . . . . . . . . . . . Bidirectional RS-232, RS-422, or RS-485 communication with hardware
and software handshaking supported
88
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C O N T R O L S YS T E M S E X PA N S I O N C A R D S c o n t i n u e d
CNXMIDI – MIDI Interface for all
Crestron Control Systems
The CNXMIDI is a fully programmable MIDI IN, OUT and THRU interface. Use with devices
such as mixers and lighting equipment.
Connectors
(1) 2-pin, connector; for wiring to MIDI device
(2) 3-pin, connector; for wiring to MIDI device
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 4W
CNXRY-8 – 8-relay Expansion Card for all
Crestron Control Systems
Includes (8) isolated , normally open relay closures. Use to activate
low voltage lighting, drapes, etc.
Connectors . . . . . . . . . . . . . . . . . . . . . . (1) 16-pin, terminal block, included; (8) hermetically sealed,
isolated relays
Ratings:
Max. Rating per Contact . . . . . . . 1A, 30VAC/VDC; MOV arc suppression across contacts for use with
“real world” loads
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 3W
CNXRY-16 – Analog Input, Digital I/O
Expansion Card for all Crestron Control Systems
Includes (2) banks of 8 relays. Each bank of 8 relays shares a common wiper.
Use to activate low voltage lighting, drapes etc.
Connectors . . . . . . . . . . . . . . . . . . . . . . (2) 9-pin, terminal block, included; (16) hermetically sealed,
isolated relays
Ratings:
Max. Rating per Contact . . . . . . . 1A, 30VAC/VDC; MOV arc suppression across contacts for use with
“real world” loads
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 5W
89
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
C O N T R O L S YS T E M S E X PA N S I O N C A R D S c o n t i n u e d
CNXVTC-3 – Volume and Tone Control Card
for all Crestron Control Systems
The CNXVTC-3 is a volume control interface including bass and treble control with
(3) independent mono channels that can be grouped via software (ie, stereo pair
and one mono, 3 mono, etc.).
Connectors . . . . . . . . . . . . . . . . . . . . . . (3) 6-pin terminal block; included; stereo plus (1) mono channel;
or (3) independent mono channels
Volume (per channel):
Input Impedance . . . . . . . . . . . . . 10K (or 600 ohms using British load resister)
Output Impedance. . . . . . . . . . . . 10 ohms
Input. . . . . . . . . . . . . . . . . . . . . . . . Balanced or Unbalanced
Output . . . . . . . . . . . . . . . . . . . . . . Balanced or Unbalanced
THD. . . . . . . . . . . . . . . . . . . . . . . . . –90dB
Hum and Noise. . . . . . . . . . . . . . . (ref.0dBv) –90dB
Max. Input Level . . . . . . . . . . . . . . (Flat mode) 3.5Vrms
Channel Separation . . . . . . . . . . . –90dB
Attenuation Range. . . . . . . . . . . . (excluding Mute) 0 to –76dB (max.)
Mute. . . . . . . . . . . . . . . . . . . . . . . . –104dB
Frequency Response . . . . . . . . . . 8Hz to 60KHz (–3dB minimum)
Tone (per channel):
Flatness . . . . . . . . . . . . . . . . . . . . . (8 to 60KHz flat mode) +/– 0.2dB
Bass Gain Range. . . . . . . . . . . . . . (100Hz) +/– 12dB
Bass Step Size . . . . . . . . . . . . . . . . (100Hz) 2dB
Treble Gain Range . . . . . . . . . . . . (10KHz) +/– 12dB
Treble Step Size . . . . . . . . . . . . . . (10KHz) 2dB
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 6W
CNXTA – Telephone and Voice/WAV Player
Interface Card for all Crestron Control Systems
The CNXTA allows access and control of a Cresnet system through standard telephone
lines. It recognizes and generates telephone Dual-Tone Multifrequency (DTMF) signals
which are used by the Cresnet system to remotely operate any device controlled by the
system.The CNXTA also recognizes caller ID (CID) and CID on call waiting, and uses audio
messages recorded as WAV files as voice prompts and responses.
Ports:
Line Level Audio Out . . . . . . . . . . 3-position male connector
Line Level Audio In . . . . . . . . . . . 4-position male connector
Phone Line . . . . . . . . . . . . . . . . . . 6-pin RJ11
Power Requirements . . . . . . . . . . . . . . 24VDC, network power, 3W
Audio Capacity . . . . . . . . . . . . . . . . . . . Approximately 30 minutes of total time
(individual WAV files up to 4 minutes)
Input Impedance . . . . . . . . . . . . . . . . . 10K or 600 Ohms
Output Impedance . . . . . . . . . . . . . . . 10 Ohms
Input/Output . . . . . . . . . . . . . . . . . . . . Balanced or Unbalanced
Input Maximum Level . . . . . . . . . . . . . 3.5V rms
Frequency Response . . . . . . . . . . . . . . 300 Hz to 3 KHz (-3dB min)
WAV file:
Format . . . . . . . . . . . . . . . . . . . . . . PCM
Frequency . . . . . . . . . . . . . . . . . . . 8,000 Hz
Bits . . . . . . . . . . . . . . . . . . . . . . . . . 16
Channels . . . . . . . . . . . . . . . . . . . . one (monophonic)
90
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES
New for 2003
CPU2 – Control Processor Card
for RACK2 Control System
The CPU2 is the central processor unit for use in the RACK2 control system. It performs
the execution of the SIMPL and SIMPL+ Windows® programs as well as managing the
Cresnet network and the expansion cards installed in the control system.The Rack2
includes one CPU2.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory:
On-board Memory . . . . . . . . . . . . 36MB
Expandable Memory . . . . . . . . . . Compact Flash slot up to 4GB (accepts standard Type II Compact Flash
or IBM Microdrive® not included)
CNXCPU – Control Processor
for CNRACKX Control System
The CNXCPU is the central processor unit for use in the CNRACKX/CNRACKX-DP systems.
It performs the execution of the SIMPL and SIMPL+ Windows® programs as well as
managing the Cresnet network and the expansion cards installed in the control system.
The CNXCPU features Crestron's exclusive DPA (Direct Processor Access) slot for
Ethernet/LAN expansion of the control network.The CNRACKX includes one CNXCPU.
The CNRACKX -DP includes two CNXCPUs
Processor:
Processing Speed . . . . . . . . . . . . . 3 MIPS
Ports:
Computer . . . . . . . . . . . . . . . . . . . DB-9 female RS-232
Cresnet. . . . . . . . . . . . . . . . . . . . . . 4-pin power and 6-pin RJ-type connectors
LAN/DPA . . . . . . . . . . . . . . . . . . . . 8-pin RJ-type connector
Indicators:
PW . . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates unit is processing data or communicating with system hardware
Power Requirements . . . . . . . . . . . . . . 24VDC from CNPWS-75 external power supply (not included)
Connectors: . . . . . . . . . . . . . . . . . . . . . . 26-pin DPA connector for optional Ethernet Expansion Card
(CNXENET or CNXENET+)
Load Factor . . . . . . . . . . . . . . . . . . . . . . 4W (8W with optional Ethernet Expansion Card)
91
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
New for 2003
CAGE2 – 3-Card Expansion Cage
for AV2 Control System
The CAGE2 is an optional 3-slot field-upgradeable internal chassis for the AV2 control
system.When installed, the CAGE2 provides 3 slots that accept any combination of 2Series Y-Bus and/or CNX series plug-in control cards to serve as the pipeline for IR, serial
communications relays, MIDI, volume control, etc.The expansion cards are secured to the
CAGE2 with two thumbscrews attached to the faceplate of each card.
Connectors:
CARD . . . . . . . . . . . . . . . . . . . . . . . (3) 62-pin connectors that accept the plug-in expansion cards
AV2 . . . . . . . . . . . . . . . . . . . . . . . . . (1) 50-pin connector for connection to the AV2 processor board.
Dimensions (HxWxD) . . . . . . . . . . . . . 3.0” (7.62cm) x 6.60” (16.77cm) x 7.12” (18.08cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.73 lb (0.36 kg)
CNXCAGE – 3-Card Expansion Cage
for CNMSX-AV Control System
CNXCAGE is a (3) slot field-upgradable internal expansion module for the CNMSX-AV.The
3 slots accept any combination of CNX control cards
Connectors:
CARD . . . . . . . . . . . . . . . . . . . . . . . (3) 62-pin female connector; for CNX Expansion Card insertion
CNMSX. . . . . . . . . . . . . . . . . . . . . . (1) 26-pin male connector for connection to CNMSX-AV
processor board
Dimensions (HxWxD) . . . . . . . . . . . . . 3.00" (7.62cm) x 6.63" (16.83cm) x 7.0" (17.78cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.64lbs. (0.29Kg)
CNCS – AC Current Sensor
for all Crestron Control Systems
The CNCS is a current sensor that provides true power status feedback for AC devices such
as monitors and video projectors.The CNCS works in conjunction with versiport
input/output ports on any control processor.
Connectors:
24+, F (OUT), P(OUT),
C (OUT), GND . . . . . . . . . . . . . . . . (1) 5-pin terminal block, included; connects to I/O port
AC OUTPUT . . . . . . . . . . . . . . . . . . (1) 3-prong socket for connection to devices that need power sensing
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 24VDC network power supplied to unit
FULL LOAD . . . . . . . . . . . . . . . . . . Indicates full load threshold has been exceeded
PARTIAL LOAD. . . . . . . . . . . . . . . . Indicates partial load threshold has been exceeded
User Adjustments (Potentiometers):
FULL LOAD (Threshold) . . . . . . . . Changes full load threshold
PARTIAL LOAD (Threshold) . . . . . Changes partial load threshold
Power Requirements . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 3.0W
Max. AC Load . . . . . . . . . . . . . . . . 8.5A, [email protected]
Min. AC Load . . . . . . . . . . . . . . . . . 0.033A, [email protected]
Voltage Range . . . . . . . . . . . . . . . 0 to 220VAC, 45 to 65Hz
Relay Contact Rating . . . . . . . . . . 1A, 24VAC/VDC
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Dimensions (HxWxD) . . . . . . . . . . . . . 1.77" (4.49cm) x 4.32" (10.98cm) x 4.33" (10.99cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8lbs. (0.8Kg)
92
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
CNXHUB – Cresnet 6-Port Expander Hub
for all Crestron Control Systems
The CNXHUB is a Cresnet compatible hub that can serve as a repeater, splitter, and
wiring block.There are six independent Cresnet ports. Each of the six ports (or segments)
has a dedicated driver/receiver.There are no master or slave ports and each port is
interchangeable with the others. Each port can support an aggregate of up to 5000’ of
Cresnet cabling with up to 25 Cresnet devices
Connections . . . . . . . . . . . . . . . . . . . . . 6 ports for mini-phoenix connectors attached to Crestron or Cat 5
cables
Indicators. . . . . . . . . . . . . . . . . . . . . . . . Front Panel LEDs
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
Net Activity (A-F) . . . . . . . . . . . . Indicates when the device on a respective segment transmits data
Power Requirements . . . . . . . . . . . . . . 24VDC, Load Factor of 2W
Dimensions (HxWxD) . . . . . . . . . . . . . 1.7" (4.32cm) x 7.1" (18.03cm) x 6.3" (16.00cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 lbs (4.2Kg)
CNXLIR – IR/Serial Learner
for all Crestron Control Systems
The CNXLIR is an IR/Serial Learner used to "learn" the IR/serial codes that control a piece of
equipment and store them to a PC-based database for use in SIMPL Windows®
programming. It is used in conjunction with Crestron's DEAL (Driver Editor And Learner)
for Windows® software to learn these codes and allow the programmer to create a
custom IR device driver file.
Required Power Supply:
Adapter . . . . . . . . . . . . . . . . . . . . . 12VDC, 0.5A, 120V input (Crestron Model PW-1205)
Communications . . . . . . . . . . . . . . . . . RS-232 (software handshaking enabled)
Indicators. . . . . . . . . . . . . . . . . . . . . . . . Front Panel LEDs
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
IR Out . . . . . . . . . . . . . . . . . . . . . . . Indicates activity on the IR out port of the unit
RDY. . . . . . . . . . . . . . . . . . . . . . . . . Indicates unit is waiting for IR signal
SGNL. . . . . . . . . . . . . . . . . . . . . . . . Indicates unit is processing (“learning”) the signal
CMPLT . . . . . . . . . . . . . . . . . . . . . . Indicates “learning” is complete
OVRDRV . . . . . . . . . . . . . . . . . . . . . Indicates unit does not accept signal
Input/Output Ports:
COMPUTER/RS-232 . . . . . . . . . . . 9-pin DB9 female connector for PC communication when “learning” codes
SIGNAL. . . . . . . . . . . . . . . . . . . . . . 4-pin used to “learn” standard serial codes
IR OUT . . . . . . . . . . . . . . . . . . . . . . Connects to STIRP probe, used to test “learned” codes
Required Software:
DEAL for Windows . . . . . . . . . . . . Version 1.0 operates the CNXLIR with limited capabilities
Version 2.0 allows full capabilities
Dimensions (HxWxD) . . . . . . . . . . . . . 1.7" (4.32cm) x 7.1" (18.03cm) x 6.3" (16.01cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 lbs. (0.91Kg)
MODEL OPTIONS:
All the features of the CNXLIR, with the following exceptions:
CNXLIRI: . . . . . . . . . . . . . . . . . . . . . . International Version; 220V
Required Power Supply:
AC adapter . . . . . . . . . . . . . . . . 12VDC, 1.0A, 230V input
93
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
CNRJ11 – 4 Wire to RJ11 “One to One” Converter
for all Crestron Control Systems
The CNRJ11 is a 1-1 converter for Cresnet 4-wire and network modular cable.
Connectors:
NET (24,Y, Z, G) . . . . . . . . . . . . . . . (1) 4-pin terminal block, included; connects to 4-wire Cresnet device
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector; connects to modular device
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal, with (6) screw holes on (2) metal ‘feet’
Dimensions (HxWxD) . . . . . . . . . . . . . 1.97" (5.00cm) x 3.25" (8.26cm) x 1.16" (2.95cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3lbs. (0.15Kg)
CNXRMAK – Rack Mount Kit for Control
Accessories and Power Interfaces
The CNXRMAK is a rack mount kit that is used to install up to three
Crestron CNHBLOCK network distribution blocks or three CNPWS-75 external
power supplies (or any combination of components) into a 19-inch rack.
Includes . . . . . . . . . . . . . . . . . . . . . . . . . Black finished mounting plate and (12) 6-32, 3/8" pan head Phillips screws
Dimensions (WxH). . . . . . . . . . . . . . . . 19.00" (48.26cm) x 3.5" (8.89cm)
CNHBLOCK – Rack-mountable Multi-type
Cresnet Distribution Block
The CNHBLOCK is a Crestron network multiple-connector type network
distribution block that provides wiring for up to 15 devices and/or peripherals.
It provides three different types of Cresnet connectors, all of which are in parallel on
the Cresnet network.
Ports:
(8) 3.5mm 4-pin screw terminal connectors and (5) 5mm 4-pin screw terminal connectors
(3) 6-pin 6-position RJ-11 modular connectors
Indicators:
POWER. . . . . . . . . . . . . . . . . . . . . . Green LED is brightly illuminated when Cresnet 24VDC is supplied
Y . . . . . . . . . . . . . . . . . . . . . . . . . . . Red LED is brightly illuminated when the correct Cresnet Y data
signal is received.
Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red LED is dimly illuminated when the correct Cresnet Z data
signal is received.
Dimensions (HxWxD) . . . . . . . . . . . . . 1.27" (3.23cm) x 5.55" (14.10cm) x 3.30" (8.38cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.68lb (0.31Kg)
94
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
CNTBLOCK – Network Terminal Block
The CNTBLOCK is a network terminal expander and diagnostic tool for the Cresnet system.
The eight network connectors are grouped in two sets of four. Power can be isolated
between the two sets by disconnecting a jumper on the board.The unit provides LED
indicators which help isolate wiring problems.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened labels
Connectors . . . . . . . . . . . . . . . . . . . . . . (8) 4-pin network connectors
LED Indicators:
POWER. . . . . . . . . . . . . . . . . . . . . . Green LED illuminates when power supplied to unit
NORM ON (Y) . . . . . . . . . . . . . . . . Red LED with three states (bright, dim and off) in various
configurations indicates whether wiring through the
CNTBLOCK is correct
NORM OFF (Z). . . . . . . . . . . . . . . . Red LED with three states (bright, dim and off) in various
configurations indicates whether wiring through the
CNTBLOCK is correct
Power Requirements . . . . . . . . . . . . . . 24VDC
Dimensions (HxWxD) . . . . . . . . . . . . . 1.9” (4.8cm) x 5.8” (14.7cm) x 0.9” (2.3cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 lb (0.2 kg)
New for 2003
IRP2 – Infrared (IR) Emitter probe
for 2-Series Control Systems
The IRP2 contains an infrared (IR) LED housed in a miniature, mouse-shaped black
injection molded plastic shell. It emits IR control signals sent to it by a Crestron 2-Series
control system.The shell can be installed directly on the IR sensor window of the
controlled device or at a nearby suitable location, while the other end plugs into the
control processor’s IR out port.
Connectors . . . . . . . . . . . . . . . . . . . . . . 2-pin for output from IR/serial port of the 2-Series control system and
the C2IR-8 card
Dimensions: . . . . . . . . . . . . . . . . . . . . .
Shell . . . . . . . . . . . . . . . . . . . . . . . . .25” (.64cm) x .31” (.79cm) x .56” (1.43cm)
Mini-wire lead . . . . . . . . . . . . . . . 3’ (.91m) long
Cable . . . . . . . . . . . . . . . . . . . . . . . 7’ (2.13m) long
Includes . . . . . . . . . . . . . . . . . . . . . . . . . IR mask, two-sided tape
95
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
CNXIRP – Infrared (IR) Emitter Probe
for CNX Control Systems
The CNXIRP contains an infrared (IR) LED housed in a miniature, mouse-shaped, black,
injection molded plastic shell.The CNXIRP shell emits IR control signals sent to it by a
Crestron control system.The shell can be installed directly on the IR sensor window of the
controlled device or at a nearby suitable location, while the other end plugs into the
control processors IR out port.
Connectors . . . . . . . . . . . . . . . . . . . . . . 2-pin for output from IR/serial port of the CNX control system and the
CNXIR-8 card
Dimensions (HxWxD):
Shell . . . . . . . . . . . . . . . . . . . . . . . . .25" (.64cm) x .31" (.79cm) x .56" (1.43cm)
Mini-wire lead . . . . . . . . . . . . . . . 3' (.91m) long
Cable . . . . . . . . . . . . . . . . . . . . . . . 7' (2.13m) long
Includes . . . . . . . . . . . . . . . . . . . . . . . . . IR mask, two-sided tape
CNANT – High-Performance Extension Antenna
The CNANT is a high performance indoor ground plane (base) antenna designed to
surpass the performance of the factory-supplied antenna provided with Crestron
1-way RF receivers such as the CNRFGWA and ST-CP. Its omni-directional radiation
pattern and remote installation permits more gain and extends its communication range.
The remote capability of the CNANT permits it to be mounted anywhere indoors within 15
feet (or up to 50 feet with longer cable, not supplied) of the receiver.
Frequency Range . . . . . . . . . . . . . . . . . 400-440 MHz
Gain (min) . . . . . . . . . . . . . . . . . . . . . . . Unity
Connectors . . . . . . . . . . . . . . . . . . . . . . 2 BNC female
Impedance . . . . . . . . . . . . . . . . . . . . . . 50 Ohms
Radiation Pattern . . . . . . . . . . . . . . . . . Omnidirectional
Dimensions (HxWxD) (upright) . . . . . 21.5" (54.61cm) x 13.5" (34.29cm) x 13.5"(34.29cm)
Weight (without cable) . . . . . . . . . . . . 0.51lb (1.12Kg)
Included. . . . . . . . . . . . . . . . . . . . . . . . . 15' (45.72 m) BNC cable
CNSP-110 – Sony Serial Umatic Cable
The CNSP-110 is a Sony VO 5000, 7000, 9000 serial Umatic cable for use with the IR/serial
port on the CNX or 2-Series control system.
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 8’ (2.44m)
CNSP-112 – Sony Control-S Cable
The CNSP-112 is a Sony Control-S cable for use with CNXIR-8 or the IR/serial port
on the CNX or 2-Series control system.
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 15’(4.57m)
96
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
CNSP-BAO – B&O Beosystem 2500 Interface
The CNSP-BAO is a Bang & Olufsen Beosystem 2500 interface for use with the IR/serial
port on the CNX or 2-Series control system.
Connectors:
IR INPUT. . . . . . . . . . . . . . . . . . . . . (1) 3-pin terminal block, included, connects to the
Cresnet control system
TO CNIRP . . . . . . . . . . . . . . . . . . . . Attached CNIRP; included
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 1.5W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Dimensions (HxWxD) . . . . . . . . . . . . . 3.69" (9.37cm) x 2.19" (5.56cm) x 1.00" (2.54cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.29lbs. (0.13Kg)
CNSP-XX – Custom Serial Interface Cable
Adaptor cable for Control System COM Port to control port of
controlled device – factory specified.
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . DB9F
Control . . . . . . . . . . . . . . . . . . . . . custom pinout and connector for controlled device
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 15.0' (4.57m)
CNPWS-75 – External 75 Watt Power Supply
The CNPWS-75 is the 75 Watt system power supply device for the CRESNET control system
and peripherals.
Connectors:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 4-pin network connectors; for connection to the Cresnet
control network
Input Plug . . . . . . . . . . . . . . . . . . . (1) 3-prong plug; for use with power supply cord; included
LED Indicators:
NET POWER. . . . . . . . . . . . . . . . . . Indicates 24VDC being supplied to Cresnet control network
Power:
Input . . . . . . . . . . . . . . . . . . . . . . 100VDC to 250VAC, 2.3A max.
Output . . . . . . . . . . . . . . . . . . . . 24VDC, 75W
Output Fuse Rating . . . . . . . . . . . 4A
Ripple/Noise . . . . . . . . . . . . . . . . . Less than 300mV
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Dimensions (HxWxD) . . . . . . . . . . . . . 2.55" (6.48cm) x 4.74" (12.05cm) x 8.07" (20.50cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3lbs. (1.1Kg)
MODEL OPTIONS:
All the features of the CNPWS-75, with the following exceptions:
CNPWSI-75 . . . . . . . . . . . . . . . . . . . (International version) All the features of the CNPWS-75, with the
following exception(s):
Input Plug . . . . . . . . . . . . . . . . . . . International power supply cord; (220VAC compatible); included
97
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
PW-1205 – Wall-Mounted Power Pack
12VDC, 0.5A
The PW-1205 is a 500mA wall-mounted power pack capable of powering a 12-volt
Crestron product from a standard 120V, 60Hz AC receptacle.
Input. . . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz
Output . . . . . . . . . . . . . . . . . . . . . . 12VDC, 0.5A
MODEL OPTIONS:
All the features of the PW-1205, with the following exceptions:
PW-1205R . . . . . . . . . . . . . . . . . . . . Wall-Mounted Regulated Power Pack
Input. . . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz, 13W
Output . . . . . . . . . . . . . . . . . . . . . . 12VDC, 0.4A regulated; 12VDC, 0.5A maximum
PWI-1205R . . . . . . . . . . . . . . . . . . . Desk-Mounted International Power Pack
Input. . . . . . . . . . . . . . . . . . . . . . . . 230V, 50Hz
Output . . . . . . . . . . . . . . . . . . . . . . 12V, 0.5A
PW-1210 – Wall-Mounted Power Pack
12VDC, 1A
The PW-1210 is a 1A wall-mounted power pack capable of powering a 12-volt Crestron
product from a standard 120V, 60Hz AC receptacle.
Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz, 18W
Output . . . . . . . . . . . . . . . . . . . . . . . . . . 12VDC, 1.0A
MODEL OPTIONS:
All the features of the PW-1210, with the following exceptions:
PWI-1210. . . . . . . . . . . . . . . . . . . . . Desk-Mounted International Power Pack
Input. . . . . . . . . . . . . . . . . . . . . . . . 230V, 50Hz, 110mA
Output . . . . . . . . . . . . . . . . . . . . . . 12V, 1.0A, 12VA
PW-1215 – Wall-Mounted Power Pack
12VDC, 1.5A
The PW-1215 is a 1.5A wall-mounted power pack capable of powering a 12-volt Crestron
product from a standard 120V, 60Hz AC receptacle.
Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . 120V, 60 Hz, 35W
Output . . . . . . . . . . . . . . . . . . . . . . . . . . 12VDC, 1.5A
MODEL OPTIONS:
All the features of the PW-1215, with the following exceptions:
PWI-1215. . . . . . . . . . . . . . . . . . . . . Desk-Mounted International Power Pack
Input. . . . . . . . . . . . . . . . . . . . . . . . 230V, 50Hz, 35W
Output . . . . . . . . . . . . . . . . . . . . . . 12V, 1.5A, 18VA
98
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
PW-2410RU – Regulated Universal Power Pack
24VDC, 1A (25 Watts)
The PW-2410RU is a 1A regulated, universal input power pack capable of powering a
24-volt Crestron product from a standard 120V, 60 Hz or 220V-240V, 50 Hz AC receptacle.
For US/International use.
Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-240V, 50-60Hz, 1A
Output . . . . . . . . . . . . . . . . . . . . . . . . . . 24VDC, 1A
PW-2420RU – Universal Regulated Power Pack
for Isys ™ Tilt Models 24VDC, 2A
(50Watts)
The PW-2420RU is a 2A regulated, universal power pack designed to power the
Isys TPS-6000,TPS-5000,TPS-4500 touchpanels and CP2/CP2E control systems and there
Crestron products from a standard 120V, 60 Hz or 220V-240V, 50 Hz AC receptacle.
For US/International use.
Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz or 230VAC, 50Hz
Output . . . . . . . . . . . . . . . . . . . . . . . . . . 24VDC, 2A regulated
New for 2003
CNX-NPA8 – Network Poll Accelerator
The CNX-NPA8 is a Cresnet network poll accelerator that maintains high data throughput
via Cresnet when a large number of Cresnet devices are used with a single 2-Series
system. CNX-NPA8 has 8 segments with 4 mini-phoenix connectors per segment (32
connectors total). Each segment operates independently to maintain full Cresnet
bandwidth and isolates each segment from network faults. In addition, each segment
has a “network analyzer” built-in to provide instantaneous network analysis.
Specifications:
Cresnet: . . . . . . . . . . . . . . . . . . . . . . . . . 8 segments with 4 mini-phoenix connectors per segment
(32 connectors total)
Each segment operates independently. Faults on one segment will not
impact operation of other segments
Cresnet
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . 2-position large screw phoenix terminal connector per channel that
can be connected to an external power supply
System
Communication:
RS232/422/485. . . . . . . . . . . . . . . Com port connection to highspeed 2-Series internal com ports or
C2COM-3 card
10/100BaseT . . . . . . . . . . . . . . . . Ethernet to any ethernet enabled 2-Series system
Indicators: . . . . . . . . . . . . . . . . . . . . . . . PWR + 8 Activity LEDs.
99
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CO N T R O L S YS T E M S
CONTROL SYSTEM ACCESSORIES, CABLES AND POWER SUPPLIES continued
New for 2003
CNX-SPWS300 – External 300 Watt Power Supply
The CNX-SPWS300 is a 24 volt 300 watt Cresnet system power supply. This device has 8
outputs and can be monitored and controlled with a Cresnet port.
Features:
Power switch . . . . . . . . . . . . . . . . . . . . The supply can be operated in a stand-alone mode by turning on an
A/C power switch or as a slave to another Cresnet system in the PWR
OFF/SLAVE position. In slave mode, 24V from the Cresnet connector
closes a relay that provides A/C for the supply.
Output: . . . . . . . . . . . . . . . . . . . . . . . . . Each of the 8 outputs has a 75W rating with a combined output rating
of 300 watts. Each output has an electronic circuit breaker that
disables a faulted output without affecting the others. The circuit
breaker can be reset by either pressing a reset button or by Cresnet
command. The total current in the supply is monitored and all breakers
are tripped if the overall rating is exceeded. All faults can be reported
to Cresnet. There are two 2-position large phoenix connectors for each
output.
Cresnet . . . . . . . . . . . . . . . . . . . . . . . . . 4-Pin screw terminal
LEDs:
PWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green – indicates 24V supply is on
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yellow – indicates device is polled in Cresnet.
SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . Red – Used for future plug and play
8 PWR . . . . . . . . . . . . . . . . . . . . . . . . . . Green – Indicates that output has power
8 OVRLD. . . . . . . . . . . . . . . . . . . . . . . . . RED – Indicates that electronic breaker has tripped.
Pushbuttons . . . . . . . . . . . . . . . . . . . . . 8 overload reset buttons
1 Cresnet setup button
Environmental:
Operating temperature . . . . . . . . . . . . 5 to 40 deg C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
100
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
LO W C O S T R O O M S O L U T I O N S
MP2/MP2E MULTIMEDIA SOLUTIONS
New for 2003
MP2 – Low-cost complete room control
and audio/video switch solution
A brilliant addition to the Crestron product line-up, the new MP2 is the ideal low-cost
room control solution featuring the powerful 2-Series control engine.
Low-cost complete room control and audio/video switch solution. Includes 4 IR/serial
ports, 2 RS-232/422/485 ports, 4 isolated relays, 4 input ports, 1 IR receiver port, Cresnet
port and 4MB Flash memory, 4 x 2 video switch, 7 x 1 audio switch w/volume control
and parametric equalizer.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 36MB Total
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . (2) DB9 for RS-232/422/485
RELAYS . . . . . . . . . . . . . . . . . . . . . . (4) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
INPUT . . . . . . . . . . . . . . . . . . . . . . . (4) programmable digital/analog inputs digital inputs rated for
0-24VDC, 20K ohms input impedance, logic threshold 1.25VDC; analog
inputs rated for 0-10VDC, protected to 24VDC maximum, 20K ohms
input impedance; programmable 2K ohms pullup resistor (per pin,
software reference to GND or closure to GND)
IR ports . . . . . . . . . . . . . . . . . . . . . 4 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.2MHz
with individual UART per port allowing simultaneous firing of all ports
IR Receiver. . . . . . . . . . . . . . . . . . . 3-position mini-phoenix for use with CNXRMIRD. Used to recognize
RC-5 and Sanyo IR remote controls.
Computer Port . . . . . . . . . . . . . . . 1 RS-232 port,9-Pin DB9 for programming a PC
Cresnet Port . . . . . . . . . . . . . . . . . 1 4-Pin male connector
Power . . . . . . . . . . . . . . . . . . . . . . . 1-jack accepts 24VDC from PW-2420RU power supply (included),
passes power through to CresNET port
Video Switcher . . . . . . . . . . . . . . . . . . . 6BNC connectors implement a 4 x 2 composite video crosspoint or can
be used as a 2 x 1 S-Video crosspoint (Y/C). All inputs have video
sensors built-in and are 75 ohm terminated. Outputs are designed to
drive 75 ohm devices
Audio Switcher . . . . . . . . . . . . . . . . . . . 8 Mini screw terminal connectors implement a 7 x 1 stereo audio
crosspoint supporting balanced and unbalanced audio in and out. A
built-in stereo volume, bass and treble control is included on the
output as well as a 6-Band parametric equalizer with user definable
presets for all input sources.
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Green LED, indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED, indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Red LED, indicates an error message is available from the
software feature buttons
Power Requirements . . . . . . . . . . . . . . External 24VDC, 2.0A2, 24W+ power jack or Cresnet connector
(Not Included)
101
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
LO W C O S T R O O M S O L U T I O N S
MP2/MP2E MULTIMEDIA SOLUTIONS continued
New for 2003
MP2E – Low-cost complete room control
and audio/video switch solution
Low-cost complete room control and audio/video switch solution. Includes 4 IR/serial
ports, 2 RS-232/422/485 ports, 4 isolated relays, 4 input ports, 1 IR receiver port, Cresnet
port and 4MB Flash memory, 4 x 2 video switch, 7 x 1 audio switch w/volume control
and parametric equalizer.
The MP2E adds connectivity via a 10/100 Ethernet port featuring static/dynamic IP
addressing, built-in web server for help desk functionality, POP3 email client, and full
compatibility with all e-Control Power Applications.
Processor:
CPU. . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed . . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 36MB Total
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . (2) DB9 for RS-232/422/485
RELAYS . . . . . . . . . . . . . . . . . . . . . . (4) normally open, isolated relays; each relay is rated 1A, 30VAC/DC;
MOV arc suppression across contacts for use with “real world” loads
INPUT . . . . . . . . . . . . . . . . . . . . . . . (4) programmable digital/analog inputs digital inputs rated for 024VDC, 20K ohms input impedance, logic threshold 1.25VDC; analog
inputs rated for 0-10VDC, protected to 24VDC maximum, 20K ohms
input impedance; programmable 2K ohms pullup resistor (per pin,
software reference to GND or closure to GND)
IR ports . . . . . . . . . . . . . . . . . . . . . 4 programmable simultaneous outputs for IR,TTL Level RS-232 or serial
interface; signal (ws) and ground (G) pins; infrared output up to 1.2MHz
with individual UART per port allowing simultaneous firing of all ports
IR Receiver. . . . . . . . . . . . . . . . . . . 3-position mini-phoenix for use with CNXRMIRD. Used to recognize
RC-5 and Sanyo IR remote controls.
Ethernet. . . . . . . . . . . . . . . . . . . . . RJ45 for 10/100 BaseT Ethernet, dynamic/static IP and full duplex
TCP/IP, UDP/IP, Built-In webserver, POP email client
Computer Port . . . . . . . . . . . . . . . 1 RS-232 port,9-Pin DB9 for programming a PC
Cresnet Port . . . . . . . . . . . . . . . . . 1 4-Pin male connector
Power . . . . . . . . . . . . . . . . . . . . . . . 1-jack accepts 24VDC from PW-2420RU power supply (included),
passes power through to CresNET port
Video Switcher . . . . . . . . . . . . . . . . . . . 6BNC connectors implement a 4 x 2 composite video crosspoint or can
be used as a 2 x 1 S-Video crosspoint (Y/C). All inputs have video
sensors built-in and are 75 ohm terminated. Outputs are designed to
drive 75 ohm devices
Audio Switcher . . . . . . . . . . . . . . . . . . . 8 Mini screw terminal connectors implement a 7 x 1 stereo audio
crosspoint supporting balanced and unbalanced audio in and out. A
built-in stereo volume, bass and treble control is included on the
output as well as a 6-Band parametric equalizer with user definable
presets for all input sources.
Reset Buttons:
HW-R . . . . . . . . . . . . . . . . . . . . . . . Performs physical reset of system
SW-R . . . . . . . . . . . . . . . . . . . . . . . Restarts SIMPL program
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Green LED, indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED, indicates activity within the system
ERR . . . . . . . . . . . . . . . . . . . . . . . . . Red LED, indicates an error message is available from the
software feature buttons
Power Requirements . . . . . . . . . . . . . . External 24VDC, 2.0A2, 24W+ power jack or Cresnet connector
(Not Included)
ADDITIONAL FEATURES
RoomView™ Software . . . . . . . . . . . . A great compliment to the MP2E, RoomView software provides
diagnostics, scheduling and equipment status in individual rooms or an
entire facility. provides: 1) Room Power (view power status facility wide,
manually turn on/off power to any room, schedule room power on/off
for individual rooms), 2) Real-time projector lamp status,
3) Receive and respond to dynamic help requests, 4) Quick-Link
connect to 2-Series control system web serving for remote help desk
functions, and 5)Monitor status of control system.
102
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
LO W C O S T R O O M S O L U T I O N S
MP2/MP2E MULTIMEDIA SOLUTIONS continued
New for 2003
MMS – Multimedia Switcher
A superb companion to the MP2/MP2E, the MMS is a scan converter and matrix switcher
for high-resolution computers and S-video source equipment to one or two display
devices.The MMS accepts the optional plug-in MMS-SC scan converter card.
Specifications:
[3 +1 x 2] S-Video Switch . . . . . . . . . . (3) S-Video inputs
(2) S-Video outputs
+
1 = Internal scan conversion input (optional)
[4 x 2 +1] RGBHV Switch . . . . . . . . . . . 4 RGBHV inputs
2 RGBHV outputs
300MHz bandwidth
+
1 = Optional scan converter on 3rd internal RGBHV output
New for 2003
MMS-SC – Plug-in Scan Converter Card
A plug-in scan converter card for MMS. Allows any of 4 RGBHV input sources to MMS to be
converted to Composite or S-Video and internally routed to the (2) S-Video outputs on the
MMS.
103
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H ™ S T S C O M P L E T E C O N T R O L S YS T E M S
STS-C – SmarTouch ™ Complete Control System
Color Version
SmarTouch™ STS is Crestron’s revolutionary wireless control system that offers
unprecedented performance and value. SmarTouch is a user friendly, radio frequency
(RF) control system that is easy to install.The complete SmarTouch system costs less
than most touchpanels alone.
The SmarTouch system is flexible enough to be a perfect fit for small to medium sized
applications. Designed for boardrooms, conference centers, home theaters and more,
SmarTouch STS makes the convenience of a control system an option in more installations
than ever before.This complete control package includes the ST-1550C color touchpanel,
ST-DS docking station, ST-CP control processor, and ST-BTP battery pack.
Communications:
Radio Frequency (RF). . . . . . . . . . 1-way; 434MHz
Touchpanel Component . . . . . . . . . . . ST-1550C wireless (RF) color LCD touchpanel included
Power Options . . . . . . . . . . . . . . . (1) ST-BTP removable, rechargeable NiCad power pack included
External, 12VDC, 1000mA AC adapter; included
Control Processor Component . . . . . . (1) ST-CP Control Processor included
Power Requirements . . . . . . . . . . External, 12VDC, 500mA AC adapter; included
Included. . . . . . . . . . . . . . . . . . . . . . . . . ST-1550C Touchpanel, ST-CP Control Processor, ST-DS Docking Station
and (2) STIRP Infrared probes
MODEL OPTIONS:
All the features of the STS-C, with the following exceptions:
STSI-C. . . . . . . . . . . . . . . . . . . . . . . . . International version
Touchpanel Component:
Power Options. . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible); included
Control Processor Component:
Power Requirements . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible); included
104
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
SMARTOUCH STS CONTR OL PR OCESSORS
ST-CP – SmarTouch Control Processor
The ST-CP is the control processor portion of the SmarTouch system. The ST-CP may be
purchased individually for use as an inexpensive control processor with built-in 1-way RF
gateway. The ST-CP is an integrated stand alone control system capable of supporting any
Cresnet device, touchpanels, etc. in an economical, compact package.
Communications . . . . . . . . . . . . . . . . . Radio Frequency (RF); 1-way; 434MHz
Communications Ports:
RF . . . . . . . . . . . . . . . . . . . . . . . . . . (1) 50 ohms BNC connector; for use with antenna (included) alone or
with standard 50 ohm extension cable (not included)
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector; for expansion to SmarTouch
peripherals, Cresnet devices, touchpanels and for programming the
SmarTouch touchpanel
PC . . . . . . . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector for communicating to a PC computer
when programming
COM A – B. . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors for controlling audio/visual devices
via independent RS-232 ports (data rate up to 38,400 baud)
IR OUT A – D . . . . . . . . . . . . . . . . . (4) RA, 3.5mm mini phone jacks for controlling additional audio/visual
devices via IR, serial format; requires STIRP IR probe(s).
The IR port can be used with TTL compatible serial interfaces/devices
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity to Cresnet and SmarTouch peripherals or from PC
RF . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates commands received from user interface (i.e., touchpanel)
ERROR . . . . . . . . . . . . . . . . . . . . . . Indicates programming problem
COM A – B. . . . . . . . . . . . . . . . . . . Indicates communications occurring from unit’s COM ports
IR A – D . . . . . . . . . . . . . . . . . . . . . Indicates commands transmitted from unit’s IR ports
Power Requirements . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter; included
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit, not included
Dimensions (HxWxD) . . . . . . . . . . . . . 1 rack unit high, 1/2 rack unit wide
1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0lbs (0.95Kg)
MODEL OPTIONS:
All the features of the ST-CP, with the following exceptions:
STI-CP . . . . . . . . . . . . . . . . . . . . . . . . International version
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible), included
105
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S
SmarTouch STS expansion modules allow the addition of devices and control features, such as current
sensing, to a SmarTouch system. Expansion is easy; up to (252) SmarTouch modules can be connected
through the modules’ network ports and are fully functional with any Cresnet system. The modules are
located near the controlled devices and are connected to the Cresnet network up to 5000' away. All STS
Expansion Modules are also completely compatible with all Crestron CNX and 2-Series control systems.
ST-CS – Cresnet Dual Current Sensor Module
The ST-CS provides power sensing to two individual 110/220V devices with a total power
capacity of 10A. ST-CS gives discrete power on/off control for (IR) devices such as VCRs,
DVD players and video projectors. The ST-CS guarantees that your controlled device is on
when you want it on.
Communications Port:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors for connection to the SmarTouch STS
system, the Cresnet control system or additional modules
Connectors:
POWER A – B . . . . . . . . . . . . . . . . (2) 3-prong socket connectors for connection to devices that need
power sensing
POWER IN . . . . . . . . . . . . . . . . . . . (1) 3-prong plug on end of (approx. 6'/1.83m) cord; attached
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
FULL (POWER A – B) . . . . . . . . . . Indicates full load threshold exceeded (threshold is user-adjustable)
PARTIAL (POWER A – B) . . . . . . . Indicates partial load threshold exceeded (also user-adjustable)
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter; included. 24VDC network power
Cresnet Power Factor. . . . . . . . . . 3.0W
Max. AC Load . . . . . . . . . . . . . . . . 10A, [email protected]
Min. AC Load . . . . . . . . . . . . . . . . . 0.033A, [email protected]
Voltage Range . . . . . . . . . . . . . . . 0-220VAC, 45-65Hz
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1 rack unit high, 1/2 rack unit wide
1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8lbs (1.3Kg)
MODEL OPTIONS:
All the features of the ST-CS, with the following exceptions:
STI-CS. . . . . . . . . . . . . . . . . . . . . . . . . International version
POWER A – B ports . . . . . . . . . . . (2) international power cords (approx. 6') connected to unit
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible); included
Max. AC Load . . . . . . . . . . . . . . . . 6A, [email protected]
106
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S c o n t i n u e d
ST-IO – Cresnet Input/Output Module
The ST-IO provides eight relay outputs and four digital/voltage inputs. The (8)
relays take care of control to low voltage contact closure devices such as lights, screens,
drapes and AV switchers. The (4) digital inputs take a contact closure
signal or an analog voltage and turn it into a command.
Communications Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors for connection to the SmarTouch STS
system or the Cresnet control system
DIGITAL IN 1, 2, 3, 4 & G . . . . . . . . (1) 5-pin connector used to detect digital input levels or analog
input levels
RELAY OUTPUT 1 – 8 . . . . . . . . . . (1) 16-pin connector provides (8) relay contact pairs
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
INPUT 1 – 4 . . . . . . . . . . . . . . . . . . Indicates signal to respective digital input is ‘logic 1’
RELAY 1 – 8 . . . . . . . . . . . . . . . . . . Indicate respective relay is closed
Versiports:
Input Threshold . . . . . . . . . . . . . . Voltage mode: 2.0VDC (+/- 0.5)
Closure mode: 2.0VDC (+/- 0.5)
Input Voltage Range . . . . . . . . . . Voltage mode: 0 to +24 VDC
Closure mode: Not applicable
Input Impedance . . . . . . . . . . . . . Voltage mode: 44K ohms to ground
Closure mode: 1K to +5VDC
Max. Rating per Relay . . . . . . . . . 1A, 30V AC or DC; 100µA, 100mV minimum
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter, included; 24VDC network power
Cresnet Power Factor. . . . . . . . . . 6.0W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1 rack unit high, 1/2 rack unit wide
1.70" (4.32cm) x 7.07" (17.948cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2lbs (1.0Kg)
MODEL OPTIONS:
All the features of the ST-IO, with the following exceptions:
STI-IO . . . . . . . . . . . . . . . . . . . . . . . . . (International version)
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible), included
107
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S c o n t i n u e d
ST-VC – Cresnet Volume Control Module
The ST-VC is a digitally controlled 3-channel audio attenuator. Each channel has
independent settings for volume, treble, bass and mute. ST-VC is ideally suited to provide
full audio control for systems without an IR- controlled integrated receiver. Choose your
mixer, preamp and amplifier, then add an ST-VC module to complete the system.
Communications Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors for connection to the SmarTouch STS
system or the Cresnet control system
CHANNELS A – C . . . . . . . . . . . . . Balanced/unbalanced IN ports connect to any device needing
volume/tone control; balanced/unbalanced OUT ports connect
to amplifier
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
V and T. . . . . . . . . . . . . . . . . . . . . . Indicates Volume (V) or Tone (T) activity on any channel (A, B, C)
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External 12VDC regulated 500mA AC adapter; not included or
24VDC network power
Cresnet Power Factor. . . . . . . . . . 6.0W
Volume (per channel):
Input Impedance . . . . . . . . . . . . . 10K ( or 600 ohmsusing internal load resister )
Output Impedance. . . . . . . . . . . . 10 ohms
Input. . . . . . . . . . . . . . . . . . . . . . . . Balanced or unbalanced
Output . . . . . . . . . . . . . . . . . . . . . . Balanced or unbalanced
Total Harmonic Distortion . . . . . (THD) -85dB
Hum and Noise. . . . . . . . . . . . . . . (ref. 0Dbv) -85dB
Max. Input Level . . . . . . . . . . . . . . (Flat mode) 4V rms
Channel Separation . . . . . . . . . . . -90dB
Attenuation Range. . . . . . . . . . . . (excluding Mute) 0 to -76dB (max.)
Mute. . . . . . . . . . . . . . . . . . . . . . . . -104dB
Frequency Response . . . . . . . . . . 8Hz to 60KHz (-3dB minimum)
Tone (per channel):
Flatness . . . . . . . . . . . . . . . . . . . . . (8 to 60KHz flat mode) +/- 0.2dB
Bass Gain Range. . . . . . . . . . . . . . (100Hz) +/- 12dB
Bass Step Size . . . . . . . . . . . . . . . . (100Hz) 2dB
Treble Gain Range . . . . . . . . . . . . (10KHz) +/- 12dB
Treble Step Size . . . . . . . . . . . . . . (10KHz) 2dB
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2lbs (1.0Kg)
108
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S c o n t i n u e d
ST-LT – Cresnet-to-Lutron® GRAFIK EYE®
Interface Module
The ST-LT provides a direct Cresnet interface to Lutron’s GRAFIK EYE ™ system.
An additional RS-232 port is also included for interfacing to a PC running Lutron®
control software. No additional interfaces are needed. ST-LT plugs directly into Lutron
Mux Link, making the Lutron connection a snap!
Communications:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors; for connection to the SmarTouch STS
system or the Cresnet control system
RS-232 . . . . . . . . . . . . . . . . . . . . . . (1) 9-Pin DB9 connector; Lutron-compatible; connects to PC running
Lutron control software; equivalent to Lutron’s GRX-RS232 input
LUTRON MUX LINK. . . . . . . . . . . . (1) 4-pin connector connects to Lutron Mux Link network
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
CRESTRON SND. . . . . . . . . . . . . . . Indicates command sent from unit to Lutron Mux Link network
CRESTRON RCV . . . . . . . . . . . . . . . Indicates command sent to unit from Lutron Mux Link network
LUTRON CMD . . . . . . . . . . . . . . . . Indicates command sent from Cresnet control system to
Lutron Mux Link network
LUTRON POLL . . . . . . . . . . . . . . . . Indicates Lutron Mux Link network polling
LUTRON PWR . . . . . . . . . . . . . . . . Indicates voltage supplied from Lutron Mux Link network
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter; included
24VDC network power
Cresnet Power Factor. . . . . . . . . . 2.5W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1 rack unit high, 1/2 rack unit wide
1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1lbs (0.95Kg)
MODEL OPTIONS:
All the features of the ST-LT, with the following exceptions:
STI-LT . . . . . . . . . . . . . . . . . . . . . . . . . (International version)
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible); included
109
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S c o n t i n u e d
ST-COM – Cresnet RS-232/422 COM Module
The ST-COM provides (2) independent bidirectional serial ports that support RS-232/422-based
communication. ST-COM lets you add control for additional serial devices such as video projectors,
AV switchers or other devices.
Communications:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors; for connection to the SmarTouch STS
system or the Cresnet control system
COM A/B . . . . . . . . . . . . . . . . . . . . (2) 9-pin, DB9 connectors; connect to serial equipment for
RS-232/RS422 communication (data rate up to 115,200 baud)
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
RXD (COM A/B). . . . . . . . . . . . . . . Indicates reception of data from serial devices attached
to respective COM ports
TXD (COM A/B). . . . . . . . . . . . . . . Indicates transmission of data to serial devices attached
to respective COM ports
RTS (COM A/B) . . . . . . . . . . . . . . . Indicates when unit is ready to receive data (handshaking) from serial
devices attached to respective COM ports
CTS (COM A/B) . . . . . . . . . . . . . . . Indicates when serial device, on the respective COM port, is ready
to accept data (handshaking) from the unit
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter; included
24VDC network power
Cresnet Power Factor. . . . . . . . . . 2.5W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1 rack unit high, 1/2 rack unit wide
1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0lbs (0.9Kg)
MODEL OPTIONS:
All the features of the ST-COM, with the following exceptions:
STI-COM . . . . . . . . . . . . . . . . . . . . . . International version
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible); included
110
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S c o n t i n u e d
ST-VS – Cresnet Video Sync Sensor Module
The ST-VS is used to detect the presence of a video signal coming out of the
baseband video port (typically the yellow RCA output jack on an A/V device)
for up to four independent sources (ie.VCRs, etc).
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24 VDC, Load Factor of 3W
Cresnet Power Factor. . . . . . . . . . 3W
Communications Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors for connection to the SmarTouch STS
System or the Cresnet control system
VIDEO 1-4 . . . . . . . . . . . . . . . . . . . (4) sets of RCA connectors for connections to up to four independent
sources that require sensing
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
VIDEO 1-4 . . . . . . . . . . . . . . . . . . . Indicates a video signal on the respective VIDEO connector exceeds the
minimum requirements for signal detection
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter, included; 24VDC network power
Cresnet Power Factor. . . . . . . . . . 3W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1 rack unit high, 1/2 rack unit wide
1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.92lbs (0.87Kg)
MODEL OPTIONS:
All the features of the ST-VS, with the following exceptions:
STI-VS . . . . . . . . . . . . . . . . . . . . . . . . (International version)
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible), included
111
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S E X PA N S I O N M O D U L E S c o n t i n u e d
ST-PC – Cresnet Dual Power Control Module
The ST-PC provides (2) switchable AC outlets. Use it to remotely turn on/off rack power or
control AV devices that have a “hard” ON/OFF switch.
Connectors:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-wire RJ-type connectors; for connection to the SmarTouch STS
control system or to the Cresnet control system
POWER A / POWER B . . . . . . . . . . (2) 3-prong socket connector; for connection to any device needing its
ON/OFF AC power controlled
Push Buttons:
POWER A / POWER B . . . . . . . . . . (2) momentary switches; when control system is inactive, switch
toggles between two states; when control system is active, switch is
under program control
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12 or 24VDC power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates command activity between unit and SmarTouch STS system
or between unit and Cresnet control system
POWER A, POWER B . . . . . . . . . . . Indicates that a controlled device plugged into respective 3-prong
socket is ON
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA AC adapter; included. 24VDC network power
Cresnet Power Factor. . . . . . . . . . 4.0W
Ratings (per relay) . . . . . . . . . . . . . . . . 120VDC, 10A Tungsten Load
Total Combined Unit Load . . . . . . . . . Not greater than 10A
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Rack Mountable . . . . . . . . . . . . . . . . . . With ST-RMK rack mount kit
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7lbs (1.15Kg)
MODEL OPTIONS:
All the features of the ST-PC, with the following exceptions:
STI-PC . . . . . . . . . . . . . . . . . . . . . . . . (International version)
POWER A, POWER B . . . . . . . . . . . (2) international power cords (approx. 6') connected to unit
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA AC adapter (220VAC compatible); included
Rating (per relay) . . . . . . . . . . . . . 250VDC, 5A Tungsten Load
Weight . . . . . . . . . . . . . . . . . . . . . . 2.8lbs (1.30Kg)
112
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S AC C E S S O R I E S
ST-DS – Docking Station/Charger for
ST-1550C/STX-1550C Touchpanels
The ST-DS is a microprocessor based docking station for the ST-1550, ST-1550C and
STX-1550C wireless touchpanels.The ST-DS can charge the ST-BTP in 2 hours.
Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC power socket connector, used to supply power via external power pack
LED Indicators:
External Power . . . . . . . . . . . . . . . . . Green LED illuminates when power is provided to the ST-DS via the
specified external power pack
CHG (Charge) . . . . . . . . . . . . . . . . . . Red LED illuminates when the ST-BTP is inserted into the ST-DS battery
cavity and remains ON while the battery is charging. If the CHG LED blinks
every second, it is in a “charge pending”state.When fast charging, the LED
will remain ON
RDY (Ready) . . . . . . . . . . . . . . . . . . . Red LED illuminates when the ST-BTP in the ST-DS battery cavity
is fully charged
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External power pack (Crestron PW-1215)
Connectors. . . . . . . . . . . . . . . . . . . . . . . . . DC power socket connector used to supply power via the recommended
external power pack
Dimensions (HxWxD) . . . . . . . . . . . . . . 6.76" (17.18cm) x 6.72" (17.06cm) x 0.94" (2.38cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.01lbs (0.46Kg)
MODEL OPTIONS:
All the features of the ST-DS with the following exceptions:
STI-DS . . . . . . . . . . . . . . . . . . . . . . . . International version, 220V
For Models STI-1550, STI-1550C, STXI-1550C. Uses PWI-1215 power pack
ST-BTP – Battery Pack for ST-1550C/STX-1550C
Touchpanels
This high-performance rechargeable power pack is designed to power the ST-1550,
ST-1550C , STX-1550C and STX-1550CW wireless touchpanels. The unique design of the
ST-BTP prevents it from being installed improperly, as it fits only one way into the battery
compartment of the touchpanel.
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removable, rechargeable NiCad
Dimensions (HxWxD) . . . . . . . . . . . . . . 1.16" (2.94cm) x 4.25" (10.78cm) x 2.28" (5.79cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.79lbs (0.36Kg)
ST-CNB – SmarTouch ™ / Cresnet Terminal Expander
The ST-CNB converts the SmarTouch 6-wire RJ-type connectors to the 4-pin screw terminal
connectors used on all Cresnet control network products.This conversion facilitates wiring
for connecting SmarTouch expansion modules to the Cresnet control network.
Connectors:
NET 1 - NET 2 (24,Y, Z, G). . . . . . . (2) 4-pin Cresnet connectors; for expansion to network devices
NET 3 - NET 6 . . . . . . . . . . . . . . . . (4) SmarTouch STS 6-wire RJ-type connectors; for expansion to
SmarTouch peripherals
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 24VDC supplied to one line
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; (3) screw holes each in two metal ‘feet’, for added stability
Dimensions (HxWxD) . . . . . . . . . . . . . 1.970" (5.00cm) x 4.25" (10.80cm) x 1.16" (2.95cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.45lbs (0.2Kg)
113
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S AC C E S S O R I E S c o n t i n u e d
STIRP – Infrared (IR) Emitter Probe
The STIRP contains an infrared (IR) LED housed in a miniature, mouse-shaped, black,
injection molded plastic shell.The STIRP shell emits IR control signals sent to it by the
ST-CP control processor.The shell can be installed directly on the IR sensor window of
the controlled device or at a nearby suitable location, while the other end plugs into the
control processors IR out port.
Connectors . . . . . . . . . . . . . . . . . . . . . . 2-pin for output from IR/serial port of the CNX control system and the
CNXIR-8 card
Dimensions (HxWxD):
Shell . . . . . . . . . . . . . . . . . . . . . . . . .25" (.64cm) x .31" (.79cm) x .56" (1.43cm)
Mini-wire lead . . . . . . . . . . . . . . . 3' (.91m) long
Cable . . . . . . . . . . . . . . . . . . . . . . . 7' (2.13m) long
Includes . . . . . . . . . . . . . . . . . . . . . . . . . IR mask, two-sided tape
ST-MB – “Master Blaster” Infrared (IR) Sprayer
The ST-MB sprays an IR signal, allowing more than one IR-controlled device to be controlled
from a single IR OUT port on the ST-CP, CN-TVAV or CEN-TVAV control processor. The ST-MB
consists of (2) components: a sprayer interconnect box and an emitter assembly.
Connectors:
IR OUT . . . . . . . . . . . . . . . . . . . . . . 3.5mm mini phone jack; for connection to emitter component
IR IN . . . . . . . . . . . . . . . . . . . . . . . . 3.5mm mini phone jack; for connection to ST-CP control processor or to
ST-SPL Infrared Splitter
Plug (on emitter) . . . . . . . . . . . . . . . . . RA; 3.5mm stereo plug with (1) hardwired cable (12'/3.66m); connects
to IR-OUT connector on interconnect box
LED Indicators (on interconnect box):
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates 12VDC power supplied to unit
IR-IN . . . . . . . . . . . . . . . . . . . . . . . . Indicates that unit is receiving an (IR) signal
LED Indicators (on emitter):
Emitter LED . . . . . . . . . . . . . . . . . . Indicates that ST-MB has output an (IR) signal
Power:
Requirements . . . . . . . . . . . . . . . . 12 or 24VDC
Options . . . . . . . . . . . . . . . . . . . . . External, 12VDC, 500mA adapter; included or 24VDC network power
Enclosure (interconnect box): . . . . . . Black metal with (6) screw holes in two metal ‘feet’
Enclosure (emitter): . . . . . . . . . . . . . . . Black metal and plastic face
Dimensions (interconnect box):. . . . . 1.97"/5.00cm (H) x 3.25"/8.26cm (W) x 1.16"/2.95cm (D)
Dimensions (HxWxD) (emitter):. . . . . 1.05"/2.67cm (H) x 1.13"/2.86cm (W) x 6.00"/15.24cm (D)
Weight (total) . . . . . . . . . . . . . . . . . . . . 0.45lbs (0.2Kg)
MODEL OPTIONS:
All the features of the ST-MB, with the following exceptions:
STI-MB . . . . . . . . . . . . . . . . . . . . . . . . (International version)
Power Options . . . . . . . . . . . . . . . External, 12VDC, 1000mA adapter (220VAC compatible), included
114
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S AC C E S S O R I E S c o n t i n u e d
ST-SPL – Infrared (IR) Splitter
The ST-SPL splits one infrared (IR) port of an ST-CP, CN-TVAV or CEN-TVAV control processor
into (5) ports, allowing control of up to (5) devices via multiple STIRP Infrared Probes.
Connectors:
OUT . . . . . . . . . . . . . . . . . . . . . . . . (5) RA, 3.5mm mini phone jack; for connection to any combination of
STIRP Infrared Probes or ST-MB ‘Master Blaster’ Infrared Sprayers
IN . . . . . . . . . . . . . . . . . . . . . . . . . . (1) RA, 3.5mm mini phone jack; connects to IR OUT port on ST-CP using
6' cable; included
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with (6) screw holes in two metal ‘feet’
Dimensions (HxWxD) . . . . . . . . . . . . . 1.97" (5.00cm) x 3.25" (8.26cm) x 1.16" (2.95cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.35lbs (0.15Kg)
ST-PK – SmarTouch ™ Programming Kit
The ST-PK includes cables, connectors and Crestron’s Windows-based VisionTools™
for Windows software, which includes SmarTouch™ Wizard and ST ProEditor software.
Cables:
Touchpanels to ST-CP . . . . . . . . . Used during programming only
PC to ST-CP . . . . . . . . . . . . . . . . . . Used during programming only
Adapters:
RJ11 to DB9F. . . . . . . . . . . . . . . . . Used during programming only
ST-RMK – Rack Mount Kit for SmarTouch ™
Expansion Modules
The ST-RMK allows rack-mounting of one or two SmarTouch STS Expansion Modules
and/or ST-CP control processor.
Components (included) . . . . . . . . . . . (1) rack mount tray; (1) front plate and bracket (to cover open gap if
only one module is mounted)
Construction . . . . . . . . . . . . . . . . . . . . . Black steel
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 19.00" (48.26cm) x 5.02" (12.74cm); occupies 1 rack unit
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4lbs (1.1Kg)
115
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S M A RTO U C H ™ S TS
S M A R T O U C H S T S AC C E S S O R I E S c o n t i n u e d
ST-112 – Sony ® Control-S Cable
The ST-112 is designed from the SmarTouch STS system, and is used specifically to control
Sony Ctrl-S devices.
Connectors . . . . . . . . . . . . . . . . . . . . . . 3.5mm (one end plugs into one of the ST-CP IR Out port, and the other
end plugs into the Control S port of any Sony Ctrl-S device)
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 15.0' (4.572m)
STCP-501 – DB9M to RJ11 Interface Cable
Adaptor Cable for a ST-CP, CN-TVAV or CEN-TVAV COM Port to any CNSP-XX RS-232 cable
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . RJ11
RS-232 . . . . . . . . . . . . . . . . . . . . . . DB9M
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0' (30.5cm)
ST-XX – Custom Serial Interface
Adaptor cable for ST-CP COM Port to RS-232 port of controlled device
Connectors:
COM . . . . . . . . . . . . . . . . . . . . . . . . RJ11
RS-232 . . . . . . . . . . . . . . . . . . . . . . custom pinout and connector for controlled device
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 15.0' (4.57 m)
116
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P E R F O R M A N C E PA K S
New for 2003
ST-AV2PAK-C – SmarTouch ™ The Ultimate Control
Package - Color Version
This complete control package includes the ST-1550C color touchpanel, ST-DS docking
station, 2-Series AV2 control system, CNRFGWA 1-way remote RF receiver, ST-BTP battery
pack and (4) IRP2 infrared emitter probes. It is an excellent choice for both commercial
and residential applications.
For individual specifications, see separate product listings.
MODEL OPTIONS:
STI-AV2PAK-C . . . . . . . . . . . . . . International Version, 220V. Includes STI-1550C, STI-DS, 2-Series AV2,
CNRFGWA, ST-BTP and (4) IRP2
New for 2003
ST-CP2PAK-C – SmarTouch ™ The Ultimate Control
Package - Color Version
This complete control package includes the ST-1550C color touchpanel, ST-DS docking
station, 2-Series CP2 control system, CNRFGWA 1-way remote RF receiver, ST-BTP battery
pack, (4) IRP2 infrared emitter probes and PW-2420RU power pack. It is an excellent choice
for both commercial and residential applications.
For individual specifications, see separate product listings.
MODEL OPTIONS:
STI-CP2PAK-C . . . . . . . . . . . . . . International Version, 220V. Includes STI-1550C, STI-DS, 2-Series CP2,
CNRFGWA, ST-BTP, (4) IRP2, and PW-2420RU
New for 2003
ST X-AV2PAK–C – SmarTouch ™ The Ultimate 2-Way
Control Package - Color Version
The complete 2-Way control package is a great solution for commercial applications such
as boardrooms, videoconferencing systems and training rooms. On the residential side,
this handy package is outstanding in a home theater or as the foundation of a
whole-house Crestron automation system. Includes STX-1550C, ST-DS, 2-Series AV2
control system, STRFGWX, ST-BTP and (4) IRP2.
For individual specifications, see separate product listings.
MODEL OPTIONS:
STXI-AV2PAK-C . . . . . . . . . . . . International Version, 220V. Includes STXI-1550C, STXI-DS, 2-Series AV2,
STRFGWX, ST-BTP and (4) IRP2
117
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
AMPLIFIERS
CNAMPX-16X60 – 16 Channel Intelligent Amplifier
An integral component of the Crestron Home™ audio distribution solution, the powerful
CNAMPX-16x60 is a 16-channel, 60 Watt/channel amp. Ample power is provided to the
eight two-channel amplifier modules by highly efficient transformers. Crestron’s
Detachable Modular Component design of the eight modules allows for rapid repair in
the field. Both channels of each module have their own power supply and filter capacitors
that produce enhanced dynamic range. Cooler operation is ensured with more than 300
square inches of radiating heat sink surface contained in each channel. Speaker line
faults and ambient temperature within the enclosure are reported via Cresnet.These
signals can be used to reduce the audio volume, activate an external cooling fan (not
included), or turn the unit off under program control.The amp runs over a Crestron control
network (Cresnet) and should typically be installed with the CNX-PAD8A or CNXBIPAD8
professional audio distribution processor.
Channels . . . . . . . . . . . . . . . . . . . . . . . . 16 grouped into 8 stereo pairs
Input Impedance . . . . . . . . . . . . . . . . . 28K ohms
Bandwidth -3dB . . . . . . . . . . . . . . . . . . 3Hz to 50KHz
Frequency Response @ 1W 8ohm. . . Flat +0, -0.1dB from 20Hz to 20KHz
Total Harmonic Distortion
(THD) @ full power. . . . . . . . . . . . . 0.03% or less
IHF I.M. Distortion . . . . . . . . . . . . . . . . 0.01% or less
SMPTE I.M. Distortion . . . . . . . . . . . . . 0.03% or less
Dynamic Headroom . . . . . . . . . . . . . . 2dB or more
Signal/Noise Ratio (S/N) "A" Weighted >110dB
Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28dB
Damping Factor . . . . . . . . . . . . . . . . . . >1000
Channel Separation over
full bandwidth . . . . . . . . . . . . . . . . . . . >100dB
Environmental Temperature
Range. . . . . . . . . . . . . . . . . . . . . . . 41-104°F / ( 5-40°C )
Environmental Humidity. . . . . . . . . . . 10% to 90% RH (non-condensing)
Power Requirements . . . . . . . . . . . . . . 120VAC, 50-60 Hz, 1800W and 24VDC, .5A, 12W network
Power:
Input Requirements. . . . . . . . . . . 120VAC +/-10%, 50-60Hz, 1800 Watts
Cresnet Power Requirements. . . 24VDC @ .5A, 12 Watts
Output Power:
8 ohm load . . . . . . . . . . . . . . . . . . 60 Watts/Channel; All channels driven, 20Hz to 20KHz, at rated THD
4 ohm load . . . . . . . . . . . . . . . . . . 90 Watts/Channel
8 ohm loadBridged . . . . . . . . . . . 220 Watts/Channel (CNXBRMD required)
Rear Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Green LED is illuminated when 24 VDC Via the Cresnet connection
is supplied to the CNAMPX-16X60.
NET . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED indicates that the SIMPL program currently loaded in the
control system has a network device defined at the same NET ID code
as the CNAMPX-16X60. LED flashes when communication with the
Cresnet system and the CNAMPX-16X60 is occurring
OVERRIDE Button & Indicator. . . OVERRIDE button is used to activate AC power and activate all room
outputs. Button functions only when 24VDC is applied to the NET
connector. Red LED illuminates when the OVERRIDE is activated
CNAMPX-16X60 continued on next page
118
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
AMPLIFIERS continued
CNAMPX-16X60 c o n t i n u e d f r o m p r e v i o u s p a g e
Rear Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . The 4-pin network connector is used to connect the CNAMPX-16X60 to
the Cresnet system
Power Connector and
Fuse Compartment . . . . . . . . . . . The power connector provides AC operating power to the CNAMPX16X60 via the supplied power cord.The fuse electrically protects the
internal circuitry from power overloads and is located (a spare fuse is
included) within the compartment above the power connector
ROOM INPUTS 1 - 8 . . . . . . . . . . . Each of the eight pair of RCA connectors is typically used to connect the
pre-amplified audio from the CNX-PAD8A or CNXBIPAD8 to the CNAMPX16X60.The left channel audio is input to the connectors with the white
center insulators and right channel audio connectors have red center
insulators
ROOM OUTPUTS 1 - 8 . . . . . . . . . These eight pair of speaker dual-binding posts output the left and right
amplified audio to the corresponding speakers.The audio positive
posts have RED screw-on caps and the audio negative posts have
BLACK screw-on caps. Each post is gold-plated and accepts bare wire,
banana plugs, or spade lugs
Dimensions (HxWxD) . . . . . . . . . . . . . 7.69" (19.53 cm) x 19.00" (48.26 cm) x 17.22" (43.74 cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 81.40lb (37.00Kg)
Rack Space Required . . . . . . . . . . . . . . 4 rack units (minimum of 1 additional rack space should be provided
above and below amp for proper ventilation)
Rack mounting ears are included
MODEL OPTIONS:
All the features of the CNAMPX-16x60, with the following exceptions:
CNAMPXI-16X60 . . . . . . . . . . International Version
Input Power Requirements. . . . . 230VAC, +/-10%, 50-60 Hz, 1800W
Room output ports do not accept banana plugs
New for 2003
CNAMPX12X60 – 12-Channel x 60W
Intelligent Amplifier
The powerful CNAMPX-12x60, a 12-channel, 60 Watt per channel amplifier, is an integral
component of the Crestron Home™ audio distribution solution. Ample power is provided to
the six two-channel amplifier modules by highly efficient transformers. Crestron’s
Detachable Modular Component design of the six modules allows for rapid repair in the
field. Both channels of each module have their own power supply and filter capacitors
that produce enhanced dynamic range. Cooler operation is ensured with more than 300
square inches of radiating heat sink surface contained in each channel.The CNAMPX12x60 reports ambient temperature within the enclosure via Cresnet.This signal can be
used to reduce the audio volume, activate an external cool fan (not included), or turn the
unit off under program control.The amp runs over a Crestron control network (Cresnet)
and should typically be installed with the CNX-PAD8A or CNXBIPAD8 professional audio
distribution processor.
Channels . . . . . . . . . . . . . . . . . . . . . . . . 12 grouped into 6 stereo pairs
Input Impedance . . . . . . . . . . . . . . . . . 28k ohms
Power Bandwidth -3dB . . . . . . . . . . . . 3Hz to 50KHz
Frequency Response @ 1W 8ohms . . Flat +0, -0.1dB from 20Hz - 20KHz
CNAMPX-12X60 continued on next page
119
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
AMPLIFIERS continued
CNAMPX12X60 c o n t i n u e d f r o m p r e v i o u s p a g e
Total Harmonic Distortion
(THD) @ full power . . . . . . . . . . . . . . . 0.03% or less
IHF I.M. Distortion . . . . . . . . . . . . . . . . 0.01% or less
SMPTE I.M. Distortion . . . . . . . . . . . . . 0.03% or less
Dynamic Headroom . . . . . . . . . . . . . . 2dB or more
Signal to Noise Ratio (S/N) “A”Weighted>110dB
Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28dB
Damping Factor . . . . . . . . . . . . . . . . . . >1000
Channel Separation over full bandwidth >100dB
Environmental Temperature Range. . 41 - 104°F (5 - 40°C)
Environmental Humidity. . . . . . . . . . . 10% to 90% RH (non-condensing)
Power Requirements:
Input. . . . . . . . . . . . . . . . . . . . . . . . 120VAC +/-10%, 60Hz, 1440W
Cresnet Power. . . . . . . . . . . . . . . . 24VDC @ 0.125A, 3W
Output Power:
8 ohm load . . . . . . . . . . . . . . . . . . 60W/channel. All channels driven, 20Hz to 20KHz, at rated THD
4 ohm load . . . . . . . . . . . . . . . . . . 90W/channel
8 ohm load Bridged . . . . . . . . . 220W/channel (CNXBRMO required)
Rear Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green LED is illuminated when 24VDC via the Cresnet connector is
supplied to the CNAMPX-12X60
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED indicates that the SIMPL program currently loaded in the
control system has a network device defined at the same NET ID code
as the CNAMPX-12x60. LED flashes when communications with the
Cresent system and the CNAMPX-12x60 is occurring
OVERRIDE Button and Indicator. . . . . OVERRIDE button is used to activate AC power and activate all room
outputs. Buttons functions only when 24VDC is applied to the NET
connector. Red LED illuminates when the OVERRIDE is activated
Rear Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . The 4-pin network connector is used to connect the CNAMPX-12X60 to
the Cresnet system
Power Connectors and
Fuse Compartment . . . . . . . . . . . The power connector provides AC operating power to the CNAMPX12X60 via the supplied power cord.The fuse electrically protects the
internal circuitry from power overloads and is located (a spare fuse is
included) within the compartment above the power connector
ROOM INPUTS 1-6 . . . . . . . . . . . . Each of the six pairs of RCA connectors is typically used to connect the
pre-amplified audio from the CNX-PAD8A to the CNAMPX-12X60.The
left channel audio is input to the connectors with the white center
insulators and right channel audio connectors have red center
insulators
ROOM OUTPUTS 1-6 . . . . . . . . . . These six pairs of speaker dual-binding posts output the left and right
amplified audio to the corresponding speakers.The audio positive
posts have RED screw-on caps and the audio negative posts have
BLACK screw-on caps. Each post is gold-plated and accepts bare wire,
banana plugs, or spade lugs
Dimensions (HxWxD) . . . . . . . . . . . . . 7.69”(19.53cm) x 19”(48.26cm) x 7.22” (43.74cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 81.4 lbs (37.0 kg)
Rack Space Required . . . . . . . . . . . . . . 4 rack units (minimum of 1 additional rack space should be provided
above and below amplifier for proper ventilation)
Rack mounting ears are included
MODEL OPTIONS:
All the features of the CNAMPX-12x60 with the following exceptions:
CNAMPXI-12X60 . . . . . . . . . . . . International Version
Input Power Requirements. . . . . 230VAC +/-10%, 50Hz, 1440W
Room output ports do not accept banana plugs
120
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
AMPLIFIERS continued
New for 2003
CNAMPX-2X60 – 2-Channel x 60W Intelligent
Room Amplifier
The CNAMPX-2x60 is a 2-channel, 60 Watt per channel amplifier ideal for a distributed
audio system. Like all Crestron CNAMPX intelligent amps, it runs over the control network
and reports its internal temperature for the protection of the entire audio system.
Designed for professional quality and ultimate reliability, it’s an integral component of the
Crestron Home™ audio distribution solution.
Channels . . . . . . . . . . . . . . . . . . . . . . . . 2 (1 stereo pair)
Input Impedance . . . . . . . . . . . . . . . . . 28k ohms
Power Bandwidth -3dB . . . . . . . . . . . . 3Hz to 50KHz
Frequency Response @ 1W 8ohms . . Flat +0, -0.1dB from 20Hz - 20KHz
Total Harmonic Distortion
(THD) @ full power . . . . . . . . . . . . . . . 0.03% or less
IHF I.M. Distortion . . . . . . . . . . . . . . . . 0.01% or less
SMPTE I.M. Distortion . . . . . . . . . . . . . 0.03% or less
Dynamic Headroom . . . . . . . . . . . . . . 2dB or more
Signal to Noise Ratio (S/N) “A”Weighted >110dB
Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28dB
Damping Factor . . . . . . . . . . . . . . . . . . >1000
Environmental Temperature Range. . 41 - 104°F (5 - 40°C)
Environmental Humidity. . . . . . . . . . . 10% to 90% RH (non-condensing)
Power Requirements:
Input. . . . . . . . . . . . . . . . . . . . . . . . 120VAC +/-10%, 60Hz, 1440W
Cresnet Power. . . . . . . . . . . . . . . . 24VDC @ 0.125A, 3W
Output Power:
8 ohm load . . . . . . . . . . . . . . . . . . 60W/channel. All channels driven, 20Hz to 20KHz, at rated THD
4 ohm load . . . . . . . . . . . . . . . . . . 90W/channel
8 ohm load Bridged . . . . . . . . . 200W/channel
Rear Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green LED is illuminated when 24VDC via the Cresnet connector is
supplied to the CNAMPX-2X60.
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED indicates that the SIMPL program currently loaded in the
control system has a network device defined at the same NET ID code
as the CNAMPX-2x60. LED flashes when communications with the
Cresent system and the CNAMPX-2x60 is occurring.
OVERRIDE Button and Indicator. . . . . OVERRIDE button is used to activate AC power and activate all room
outputs. Buttons functions only when 24VDC is applied to the NET
connector. Red LED illuminates when the OVERRIDE is activated.
Rear Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . The 4-pin network connector is used to connect the CNAMPX-2X60 to
the Cresnet system.
Operation Mode . . . . . . . . . . . . . . . . . . 3-position switch: stereo, mono (sum L+R) and bridged
Power Connectors and
Fuse Compartment . . . . . . . . . . . The power connector provides AC operating power to the CNAMPX2X60 via the supplied power cord.The fuse electrically protects the
internal circuitry from power overloads and is located (a spare fuse is
included) within the compartment above the power connector.
CNAMPX-2X60 continued on next page
121
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
AMPLIFIERS continued
CNAMPX-2X60 c o n t i n u e d f r o m p r e v i o u s p a g e
ROOM INPUT. . . . . . . . . . . . . . . . . 2 single-ended line level inputs with gold-plated RCA jacks
ROOM OUTPUT . . . . . . . . . . . . . . . 2 speaker dual-binding posts output the left and right amplified audio
to the corresponding speakers.The audio positive post has a RED
screw-on cap and the audio negative post has a BLACK screw-on cap.
Each post is gold-plated and accepts bare wire, banana plugs, or spade
lugs.
Dimensions (HxWxD) . . . . . . . . . . . . . 4.18” x(10.62cm) x 19”x (48.26cm) x 17.22” (43.74cm)
Two CNAMPX-2x60 units may be mounted using the RMK-AMPX2x60. (minimum of 1 additional rack space
should be provided above and below amplifier for proper ventilation)
MODEL OPTIONS:
All the features of the CNAMPX-2x60 with the following exceptions:
CNAMPXI-2X60. . . . . . . . . . . . . . International Version
Input Power Requirements. . . . . 230VAC +/-10%, 50Hz, 1440W
Room output ports do not accept banana plugs
New for 2003: Call Crestron True Blue Support for more information on specifications
New for 2003
CNAMPX-7X200 – 7-Channel x 200W Surround
Sound Amplifier
The CNAMPX-7x200 is a high-powered digital surround sound amplifier with 7 channels
at 200 Watts per channel. Designed to be used with a powered subwoofer, it’s ideal for
home theaters or large rooms, to provide the authentic cinema experience for everything
from action movies to classic films. Like all Crestron CNAMPX intelligent amps, it runs over
the control network and reports its internal temperature for the protection of the entire
audio system. Designed for professional quality and ultimate reliability, it’s an integral
component of the Crestron Home™ audio distribution solution. Ideal for use with CNXDAP8 or CNX-DAP8RC surround sound processors
Channels . . . . . . . . . . . . . . . . . . . . . . . . 7 channels
Input Impedance . . . . . . . . . . . . . . . . . 28k ohms
Power Bandwidth -3dB . . . . . . . . . . . . 3Hz to 50KHz
Frequency Response @ 1W 8ohms . . Flat +0, -0.1dB from 20Hz - 20KHz
Total Harmonic Distortion
(THD) @ full power . . . . . . . . . . . . . . . 0.03% or less
IHF I.M. Distortion . . . . . . . . . . . . . . . . 0.01% or less
SMPTE I.M. Distortion . . . . . . . . . . . . . 0.03% or less
Dynamic Headroom . . . . . . . . . . . . . . 2dB or more
Signal to Noise Ratio (S/N) “A”Weighted >110dB
Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28dB
Damping Factor . . . . . . . . . . . . . . . . . . >1000
CNAMPX-7X200 continued on next page
122
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
AMPLIFIERS continued
CNAMPX-7X200 c o n t i n u e d f r o m p r e v i o u s p a g e
Channel Separation over full bandwidth>100dB
Environmental Temperature Range. . 41 - 104°F (5 - 40°C)
Environmental Humidity. . . . . . . . . . . 10% to 90% RH (non-condensing)
Power Requirements:
Input. . . . . . . . . . . . . . . . . . . . . . . . 120VAC +/-10%, 60Hz,
Cresnet Power. . . . . . . . . . . . . . . . 24VDC @ 0.125A, 3W
Output Power:
8 ohm load . . . . . . . . . . . . . . . . . . 200W/channel. All channels driven, 20Hz to 20KHz, at rated THD
4 ohm load . . . . . . . . . . . . . . . . . . 300W/channel
Rear Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green LED is illuminated when 24VDC via the Cresnet connector is
supplied to the CNAMPX-7x200.
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yellow LED indicates that the SIMPL program currently loaded in the
control system has a network device defined at the same NET ID code
as the CNAMPX-7x200. LED flashes when communications with the
Cresent system and the CNAMPX-7x200 is occurring.
OVERRIDE Button and Indicator. . . . . OVERRIDE button is used to activate AC power and activate all room
outputs. Buttons functions only when 24VDC is applied to the NET
connector. Red LED illuminates when the OVERRIDE is activated.
Rear Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . The 4-pin network connector is used to connect the CNAMPX-7x200 to
the Cresnet system.
Power Connectors and
Fuse Compartment . . . . . . . . . . . The power connector provides AC operating power to the CNAMPX7x200 via the supplied power cord.The fuse electrically protects the
internal circuitry from power overloads and is located (a spare fuse is
included) within the compartment above the power connector.
AUDIO INPUTS . . . . . . . . . . . . . . . 7 single-ended line level inputs utilize gold-plated RCA jacks
SPEAKER OUTPUTS. . . . . . . . . . . . The 7 speaker output terminals are multi-way binding post type. Each
post is gold-plated and accepts bare wire, banana plugs, or spade lugs.
MODEL OPTIONS:
All the features of the CNAMPX-7x200 with the following exceptions:
CNAMPXI-7X200 . . . . . . . . . . . . International Version
Input Power Requirements. . . . . 230VAC +/-10%, 50Hz,
Room output ports do not accept banana plugs
New for 2003
RMK-AMPX2X60 – Rack Mount Kit
The RMK-AMPX2x60 allows two Crestron CNAMPX-2-60 room amplifiers to be mounted
side-by-side into a vertical equipment rack.
Construction . . . . . . . . . . . . . . . . . . . . . Black metal
123
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S
New for 2003
CNX-PAD8A – 8 Source/8 Room Enhanced
Professional Stereo Audio Distribution Processor
The CNX-PAD8A is an enhanced version of Crestron’s professional high-end audio
distribution system. It delivers audio from up to 8 sources into as many as 8 separate
rooms and can be expanded with additional CNX-PAD8A chassis to 32 rooms. Powered by
Crestron’s 2-Series, CNX or STS control systems, the CNX-PAD8A can be programmed to
select any available audio source, preamplify its signal and then distribute it to as many
as eight room amplifiers, each of which can be chosen according to its application. Any
Crestron user interface – from keypad to touchpanel – provides access and control to the
PAD8A’s functions.The PAD8A should typically be installed with the CNAMPX-16x60 or
CNAMPX-12x60.
Connectors:
Source 1-8 . . . . . . . . . . . . . . . . . . . . . . . 8 sets of four RCA jacks; used to connect the independent audio
sources to the CNX-PAD8A; Of each set, two of the connectors are used
for the left and right audio channels and the remaining two connectors
are parallel stereo loop-throughs
Rooms 1-8. . . . . . . . . . . . . . . . . . . . . . . 8 pairs of RCA jacks; output pre-amplified audio to corresponding
room(s) amplifier(s); Each room output has left and right audio
channels
Cresnet. . . . . . . . . . . . . . . . . . . . . . 4-pin network connector used to connect the CNX-PAD8A to the
Cresnet system
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the system and CNX-PAD8A
ROOMS 1-8 . . . . . . . . . . . . . . . . . . Indicates a audio source signal is routed to corresponding room
Preamp Specifications (per channel):
Input Impedance . . . . . . . . . . . . . 54K ohms
Output Impedance. . . . . . . . . . . . 37.5 ohms
Total Harmonic Distortion. . . . . . <0.02%
Maximum Input Level
(Flat Mode) . . . . . . . . . . . . . . . . . . 3.2Vrms
Maximum Output Level . . . . . . . 2.5Vrms
Signal to Noise . . . . . . . . . . . . . . . >100dB
Channel Separation . . . . . . . . . . . >90dB
Gain Range (Excluding Mute) . . -80dB to +20dB(1db steps)
Mute. . . . . . . . . . . . . . . . . . . . . . . . -92dB
Relay Isolation. . . . . . . . . . . . . . . . From each output in the off mode, with power on delay
Tone Specifications:
Freq. Response(10Hz to 20Hz . . . +/- 0.2dB
Bass Gain Range (100Hz) . . . . . . +/- 12dB
Bass Step Size (100Hz) . . . . . . . . 2dB
Treble Gain Range (10KHz) . . . . . +/- 12dB
Treble Step Size (10KHz) . . . . . . . 2dB
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.42A; network power; 10W
Dimensions (HxWxD) . . . . . . . . . . . . . 3.47” (8.81cm) x 17.10” (43.43cm) x 8.43” (21.41cm)
19”(W) w/provided rack-mount ears
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16 lbs (2.34 kg)
MODEL OPTIONS:
CNX-ASBK . . . . . . . . . . . . . . . . . . . . Bussing Kit to daisy-chain up to 4 CNX-PAD8A processors
for up to 8 source /32 Room audio distribution
124
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S c o n t i n u e d
New for 2003
CNX-BIPAD8 – 16 Source/8 Room Professional
Stereo Audio plus 8 Room Bi-DirectionalCAT5
Audio Distribution Processor
The Bi-Directional Professional Audio Distribution 8 room preamplifier, or CNX-BIPAD8, is
a second-generation product in Crestron’s audio distribution product line. It has all the
capabilities of the CNX-PAD8A plus increased number of inputs and the ability to route
audio to and from remote locations utilizing low cost CAT5 cables and Crestron’s CNXRMCLV, CNX-DAP8 and CNX-DAP8RC room boxes.The 16 stereo head end audio inputs are
RCA connectors with loop-through. In addition, there are 8 CAT5 stereo inputs, designed to
come from the remote rooms via the CNX-RMCLV.The 24 inputs pass through a stereo
24x8 crosspoint switch. Each output of the crosspoint goes to a differential driver to the
CAT5 connectors.The same outputs also go to volume/tone preamplifiers with mono and
loudness, and then to mute relays before they go to the RCA output connectors.
Connectors:
Sources 1-16 . . . . . . . . . . . . . . . . . . . . . 16 sets of four RCA jacks; used to connect the independent audio
sources to the CNX-BIPAD8; Of each set, two of the connectors are used
for the left and right audio channels and the remaining two connectors
are parallel stereo loop-throughs
Rooms 1-8. . . . . . . . . . . . . . . . . . . . . . . 8 sets of RCA jacks for connection to power amplifier
Remote Inputs/Outputs . . . . . . . . . . . 8 shielded RJ45 connectors for balanced line level audio; 1 stereo input
and 1 stereo output per connector
CAT5 Max Distance . . . . . . . . . . . 500’
Cresnet. . . . . . . . . . . . . . . . . . . . . . Four-pin network connector used to connect the CNX-BIPAD8 to the
Cresnet system
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the system and CNX-BIPAD8
ROOMS 1-8 . . . . . . . . . . . . . . . . . . Indicates a audio source signal is routed to corresponding room
Preamp Specifications (per channel):
Input Impedance . . . . . . . . . . . . . 10K ohms
Total Harmonic Distortion. . . . . . <0.02%
Signal/Noise Ratio . . . . . . . . . . . . >100dB
Maximum Input Level . . . . . . . . . 3.2Vrms
Maximum Output Level . . . . . . . 2.5Vrms
Channel Separation . . . . . . . . . . . >90dB
Gain Range (Excluding Mute) . . -80dB to +20dB
Mute. . . . . . . . . . . . . . . . . . . . . . . . >120dB (relay), 100dB (electronic mute)
Relay Isolation. . . . . . . . . . . . . . . . From each output in the off mode, with power on delay
Tone Specifications:
Flatness (8 to 60KHz flat mode). +/- 0.2dB
Bass Gain Range (100Hz) . . . . . . +/- 14dB
Bass Step Size (100Hz) . . . . . . . . 2dB
Treble Gain Range (10KHz) . . . . . +/- 14dB
Treble Step Size (10KHz) . . . . . . . 2dB
Crosstalk . . . . . . . . . . . . . . . . . . . . -90dB
Power Requirements . . . . . . . . . . . . . . 24VDC, .42A; network power
Dimensions (HxWxD) . . . . . . . . . . . . . 3.46” 98.79cm) x 19.00” (48.26cm) x 8.44” (21.44cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2lbs/ 2.8kg
125
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S c o n t i n u e d
New for 2003
CNX-DAP8 – 7.1 Surround Sound
Audio Processor
The CNX-DAP8 is the first surround sound processor developed exclusively for accepting
control system integration. It accommodates standard extended DTS® and Dolby®
formats, accepting either digital or analog audio inputs.With software upgrades easily
uploaded via the Crestron network, and chips easily replaced for future hardware
upgrades, obsolescence will never be a concern.
Connectors:
Coax Digital Inputs. . . . . . . . . . . . 2x(SPDIF), RCA each
Fiber Optic Inputs. . . . . . . . . . . . . Toslink
Stereo Input . . . . . . . . . . . . . . . . . 10 RCA, 1 pair for each of 5 sources
Stereo differential I/O . . . . . . . . . RJ45 (connects to CNX-BIPAD8) for input/output and 2 P/O RCA for
stereo output of same signal (can be used as record output)
Stereo Output . . . . . . . . . . . . . . . . 2 RCA stereo output of DSP input, but with volume/tone control (can
be used with TV if surround sound is not active)
Surround Sound Output . . . . . . . 8 RCA for 7.1 surround sound output
RS-232 . . . . . . . . . . . . . . . . . . . . . . RJ11
Cresnet. . . . . . . . . . . . . . . . . . . . . . Mini-phoenix for Cresnet with setup button and LED
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the system and CNX-DAP8
Surround Sound Modes . . . . . . . . . . . PCM up to 96KHz; MPEG-2; Dolby Pro Logic; Dolby Pro Logic II; Dolby
Digital 5.1; Dolby digital EX Matrix 6.1; DTS 5.1; DTS ES Discrete 6.1; DTS
ES Matrix 6.1; DTS Neo:6 Cinema; DTS Neo:6 Music
“Dolby Digital” and “DTS” are trademarks of Dolby Laboratories
New for 2003
CNX-DAP8RC – 7.1 Surround Sound Audio
Processor with Room Control and CAT5 Video
The CNX-DAP8RC provides all the CAT5 head-end/local AV distribution and control
features of the CNX-RMCLV with the digital surround sound processing of the CNX-DAP8.
The result is cost-effective surround sound in any room of the house.
The CNX-DAP8RC also functions as a Cresnet room control interface to local AV and other
devices such as TVs, Projectors,VCRs, and DVD players. One bi-directional RS-232 and four
IR ports are provided. A current sensor input accepts power status feedback from the
optional CNXRMCS current sensor (available separately.) In addition, a powered IR input
allows connection of the optional CNX-RMIRD IR sensor (available separately) to receive IR
commands from a Philips Pronto® or similar universal remote control, which may be
programmed to control any device connected to the Cresnet system. Naturally, any
Crestron touchpanel or pushbutton control panel may be used with the CNX-DAP8RC
as well.
CNX-DAP8RC continued on next page
126
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S c o n t i n u e d
CNX-DAP8RC c o n t i n u e d f r o m p r e v i o u s p a g e
Video Connectors:
Head End Video Inputs . . . . . . . . RJ45 CAT5 (1-4) 4 channels of balanced video with cable length
compensation on 1-3.
Local Video Inputs . . . . . . . . . . . . 12 RCA with built-in 75 ohm termination, all 12 inputs have video
sensor capability. Any combination of composite, S-Video, Component
Video including HDTV
Head End Video Return . . . . . . . . RJ45, 4 channels of balanced video
Local Video Outputs. . . . . . . . . . . 12 RCA
Video Input Compensation 1-3 . Adjustable independently by video input to compensate for varying
CAT5 cable lengths.The fourth signal has a fixed compensation
network and is intended for digital audio.
Audio Connectors:
Coax Digital Inputs. . . . . . . . . . . . 2x(SPDIF), RCA each
Fiber Optic Inputs. . . . . . . . . . . . . Toslink
Stereo Input . . . . . . . . . . . . . . . . . 10 RCA, 1 pair for each of 5 sources
Stereo differential I/O . . . . . . . . . RJ45 (connects to CNX-BIPAD8) for balanced input/output and 2 P/O
RCA for stereo output of same signal (can be used as record output)
Stereo Output . . . . . . . . . . . . . . . . 2 RCA stereo output of DSP input, but with volume/tone control (can
be used with TV if surround sound is not active)
Surround Sound Output . . . . . . . 8 RCA for 7.1 surround sound output
Surround Sound Modes . . . . . . . . . . . PCM up to 96KHz; MPEG-2; Dolby Pro Logic; Dolby Pro Logic II; Dolby
Digital 5.1; Dolby digital EX Matrix 6.1; DTS 5.1; DTS ES Discrete 6.1; DTS
ES Matrix 6.1; DTS Neo:6 Cinema; DTS Neo:6 Music
RS-232 Output . . . . . . . . . . . . . . . 6-Pin RJ-11
IR Input . . . . . . . . . . . . . . . . . . . . . 1 mini stereo phone jack (power, ground, signal)
IR Outputs . . . . . . . . . . . . . . . . . . . 4 mini phone phone jack (ground, signal)
SENS Input. . . . . . . . . . . . . . . . . . . 2-pin mini-phoenix contact closure connector for use with a current
sensor to detect power status of devices such as televisions.
Cresnet. . . . . . . . . . . . . . . . . . . . . . 4-pin mini-phoenix network connector used to supply power and
connect the CNX-DAP8RC to the Cresnet system
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the Cresnet system and the
CNX-DAP8RC
Setup . . . . . . . . . . . . . . . . . . . . . . . LED/pushbutton switch for use with future functions
Video:
Local Video Bandwidth . . . . . . . . 60 MHz
Crosstalk . . . . . . . . . . . . . . . . . . . . <60dB
“Dolby Digital” and “DTS” are trademarks of Dolby Laboratories
New for 2003
CNX-PBAR4 – 4 Room CAT5 Professional Balanced
Audio Receiver
The CNX-PBAR4 is a 4-room CAT5 to RCA audio receiver that converts balanced audio to
single-ended audio signals. Allows balanced audio signals sent from up to four
CNXRMCLV’s to be routed to multiple CNX-BIPAD8’s in large home audio distribution
systems
Connectors:
CAT5 Audio Inputs . . . . . . . . . . . . 4 RJ45 CAT5 (each 1-4), labeled A-D
Audio Input Compensation . . . . Signals 1-3, for each of the 4 CAT5 audio inputs. Adjustable
independently to compensate for varying CAT5 cable lengths
Audio Outputs . . . . . . . . . . . . . . . 4 sets of 4 RCAs
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
127
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S c o n t i n u e d
CNX-ASBK – Bussing Kit for CNX-PAD8
and CNX-PAD8A
The CNX-ASBK is used to daisy-chain CNX-PAD8A audio distribution processors to expand
the number of room outputs. Each CNX-PAD8A controls up to eight audio sources and
distributes the audio to up to eight room amplifiers. A maximum of four CNX-PAD8As
may be daisy-chained together to provide up to 32 room outputs.The CNX-ASBK busses
the inputs of each CNX-PAD8A while preventing extreme impedance loading. One kit is
needed for each
CNX-PAD8A to be daisy-chained.
CNXBRMO – Mono Converter & Bridge for
Mono/Stereo
The CNXBRMO is a low-voltage accessory device designed specifically for use with the
Crestron CNX-PAD8A Professional Audio Distribution Processor.The CNXBRMO provides
the mixing of stereo sources to mono and facilitates bridging of power amplifiers. Crestron
recommends the use of the CNAMPX-16x60 or CNAMPX-12x60 Professional Audio
Amplifier when using the CNXBRMO for bridging.
I/O Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . 6-pin, 6-position RJ11 modular jack to connect to the CresNET
control system.
INPUT (L & R) . . . . . . . . . . . . . . . . Two RCA jacks are used to connect to the CNX-PAD8A to accept left
and right line-level audio.
OUTPUT (L & R). . . . . . . . . . . . . . . Two RCA jacks are used to connect to a room/zone amplifier
to provide direct left and right line-level audio.
INVERTED OUTPUT (L & R) . . . . . Two RCA jacks are used to connect to a room/zone amplifier
to provide inverted left and right line-level audio.
Indicators:
PWR (Power) . . . . . . . . . . . . . . . . . LED illuminates when the CNXBRMO receives +24 VDC from
the Cresnet system.
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . Centrally located on the top panel of the CNXBRMO, a single
two-position toggle switch is used to select between mono
and stereo output.
Operating Temperature. . . . . . . . . . . . 41-122 degrees Farenheit/5-50 degrees Celsius
Acceptable Humidity. . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
Dimensions (HxWxD) . . . . . . . . . . . . . 2.54" (6.44cm) x 5.75" (14.61cm) x 1.25" (3.19cm)
(including connectors)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.54lb (0.24Kg)
128
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S c o n t i n u e d
ST-TUNE– Cresnet AM/FM/TV Tuner
The ST-TUNE is a high-performance AM/FM/TV tuner.The ST-TUNE allows for enhanced bidirectional control by connecting directly to a Cresnet system.The Cresnet control system can
store virtually unlimited radio station and television (TV) channel presets.The presets are
available for recall through Cresnet keypads, remote control devices, and/or touchpanels.The
frequency of the radio station or TV channel being received is displayed on the ST-TUNE and
can also be displayed on all wired and 2-way wireless touchpanels. For domestic use only.
Buttons:
TUNING !" . . . . . . . . . . . . . . . . Tunes signal up or down
BAND . . . . . . . . . . . . . . . . . . . . . . . Selects either AM, FM or TV
MONO . . . . . . . . . . . . . . . . . . . . . . Toggles between mono and stereo reception (all modes except AM)
MODE . . . . . . . . . . . . . . . . . . . . . . . Selects either local preset, manual tuning, or search mode
Connectors:
12VDC, 1A . . . . . . . . . . . . . . . . . . . Power socket connector used to supply power via an external
power pack
NET . . . . . . . . . . . . . . . . . . . . . . . . . (2) 6-position RJ11 modular jacks are pass-through connectors that are
also used to connect the unit to the Cresnet control system
AUDIO (L+R) . . . . . . . . . . . . . . . . . (1) RCA jack pair; audio outputs
VIDEO . . . . . . . . . . . . . . . . . . . . . . . RCA jack; outputs composite video
AM . . . . . . . . . . . . . . . . . . . . . . . . . 2-position connector; connects to AM antenna
FM. . . . . . . . . . . . . . . . . . . . . . . . . . “F” type coaxial connector; connects to FM antenna
TV . . . . . . . . . . . . . . . . . . . . . . . . . . “F” type coaxial connector; connects to TV antenna
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communications with the Cresnet control system
SIG . . . . . . . . . . . . . . . . . . . . . . . . . Display indicates strength of incoming signal
MONO . . . . . . . . . . . . . . . . . . . . . . Indicates that mono output is activated in FM or TV band
SAP . . . . . . . . . . . . . . . . . . . . . . . . . Indicates that secondary audio program selector is activated while in
the TV band
PRE . . . . . . . . . . . . . . . . . . . . . . . . . Indicates that manual preset mode is activated
TUNE . . . . . . . . . . . . . . . . . . . . . . . Indicates that manual tuning mode is activated
SRCH. . . . . . . . . . . . . . . . . . . . . . . . Indicates that manual search mode is activated
AM . . . . . . . . . . . . . . . . . . . . . . . . . Indicates unit is set for AM reception
FM. . . . . . . . . . . . . . . . . . . . . . . . . . Indicates unit is set for FM reception
TV . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates unit is set for TV reception
AM Tuner Specifications:
Sensitivity . . . . . . . . . . . . . . . . . . . 55µV
Alternate Channel Selectivity . . . 55dB
Image Rejection . . . . . . . . . . . . . . 35dB
IF Rejection . . . . . . . . . . . . . . . . . . 60dB
Output Level,Line @ 10k ohms AM/FM. . 1VRMS
ST-TUNE continued on next page
129
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
P R O C E S S O R S , T U N E R S A N D AC C E S S O R I E S c o n t i n u e d
ST-TUNE– c o n t i n u e d f r o m p r e v i o u s p a g e
FM Tuner Specifications:
Input Connector (“F”Type Coaxial) . . 75 ohms
Frequency Range . . . . . . . . . . . . . 87.5MHz to 107.9MHz
Usable Sensitivity, Mono . . . . . . . 11 (dBf)
Signal to Noise Radio @ 65 dBf,
mono/stereo . . . . . . . . . . . . . . 74dB/70dB
Selectivity, Adjacent/
Alternate Channel . . . . . . . . . . . 5dB/65dB
IF Rejection . . . . . . . . . . . . . . . . . . 100dB
AM Rejection . . . . . . . . . . . . . . . . 55dB
Stereo Separation. . . . . . . . . . . . . 45dB
THD @ 1KHz mono/stereo (%). . 0.05
TV Tuner Specifications
Input Connector (“F”Type Coaxial) . . 75 ohms
Off air TV Channels. . . . . . . . . . . . 2 to 83
CATV Cable Channels. . . . . . . . . . 2 to 125
Audio Stereo Separation . . . . . . . 35dB
Audio THD @ 1KHz L+R. . . . . . . . 0.2%
Sensitivity . . . . . . . . . . . . . . . . . . . –20 to +20dBmV
Video Level @ 75 ohms . . . . . . . . 1VRMS
Audio Output Level,Line @ 10k ohms. . 1VRMS
SAP . . . . . . . . . . . . . . . . . . . . . . . . . Secondary Audio Program
Power Requirements . . . . . . . . . . . . . . 12VDC external power pack or 24VDC, 0.375A; network power, load
factor of 9W
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.23cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3lbs (1.05Kg)
130
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
C O M P L E T E AU D I O PAC K AG E S
New for 2003
C2-AUDIO-PAK – Basic 8-Zone Audio
Distribution Package
The C2-AUDIO-PAK is a basic 8-zone audio distribution package. Its control system,
amplifier and audio distribution process or are the ideal starting point for a wide variety
of residential and commercial applications.This packaged solution requires only minimal
configuration and quick setup. It’s also an excellent way to start a basic system that’s fully
expandable for future upgrades.When enhanced with additional Crestron components
and accessories, the package becomes the foundation for a truly sophisticated control
and automation system.
CNAMPX-16X60 . . . . . . . . . . . . . 16-channel amplifier delivers 60 Watts of power per channel, offers
remote power on/off, and features built-in intelligence to report
temperature status and speaker faults via the control network.
CNX-PAD8A . . . . . . . . . . . . . . . . . Professional audio distribution processor makes it possible to switch
audio sources, preamplify their signals and distribute them to the
amplifier.
2-SERIES CP2 . . . . . . . . . . . . . . . . High-performance 2-Series CP2 control processor is the heart of the
system, providing for control of a wide variety of audio and other
devices.
PW-2420RU . . . . . . . . . . . . . . . . . . Power pack, desktop, 24VDC, 2A, regulated. (not shown)
MODEL OPTIONS:
C2I-AUDIO-PAK . . . . . . . . . . . . International Version. Includes CNAMPXI-16X60, CNX-PAD8A,
2-Series CP2 and PW-2420RU.
131
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
AU D I O D I S T R I B U T I O N & C O N T R O L
C O M P L E T E AU D I O PAC K AG E S c o n t i n u e d
New for 2003
C2-AUDIO-6PAK – Complete 6-Zone Audio
Distribution Package
The C2-AUDIO-6PAKB, or Audio Six-Pack, is a complete package of 14 high-performance
components plus programming software, all specially designed to work together.This
packaged solution requires only minimal configuration and quick setup. It’s also an
excellent way to start a basic system that’s fully expandable for future upgrades.When
enhanced with additional Crestron components and accessories, the package becomes
the foundation for a truly sophisticated home control and automation system.
The Audio Six-Pack Wizard Software reduces programming time by up to 12 hours.
Created specifically for use with the Audio Six-Pack, its simple three-step process requires
no special programming expertise. Simply name the system, select sources from the onboard database of audio devices, and customize the interfaces by labeling the source
buttons on each keypad.
CNAMPX-12X60 . . . . . . . . . . . . 12-channel amplifier delivers 60 Watts of power per channel, offers
remote power on/off, and features built-in intelligence to report
temperature status via the control network.
CNX-PAD8A . . . . . . . . . . . . . . . . . Professional audio distribution processor makes it possible to switch
audio sources, preamplify their signals and distribute them to the
amplifier.
2-SERIES CP2 . . . . . . . . . . . . . . . . High-performance 2-Series CP2 control processor is the heart of the
system, providing for control of a wide variety of audio and other
devices.
CNHBLOCK . . . . . . . . . . . . . . . . . . . Network distribution block provides wiring for up to 15 controlled
devices and/or peripherals.
IRP2 . . . . . . . . . . . . . . . . . . . . . . . . . . . (4) infrared emitter probes attach to the controlled devices to deliver IR
signals from the control processor.
CNX-BF12 . . . . . . . . . . . . . . . . . . . . 6 wall-mounted keypads (one for each room or zone) feature six source
buttons, an on/off button, a mute button, volume controls and basic
device control buttons.
CNPWS-75 . . . . . . . . . . . . . . . . . . . External power supply, 75watt power supply device. (not shown)
AUDIO SIX-PACK WIZARD .. Programming software requires no special programming expertise to
automatically configure the six zones, choose audio sources and
customize keypads.
MODEL OPTIONS:
C2-AUDIO-6PAKA . . . . . . . . . Includes CNAMPX-12X60, CNX-PAD8A, 2-Series CP2, CNHBLOCK, (4)
IRP2, (6) CNX-BF12A (Almond Faceplate), CNPWS-75 and Audio SixPack Wizard.
C2-AUDIO-6PAKB . . . . . . . . . Includes CNAMPX-12X60, CNX-PAD8A, 2-Series CP2, CNHBLOCK, (4)
IRP2, (6) CNX-BF12B (Black Faceplate), CNPWS-75 and Audio Six-Pack
Wizard.
C2-AUDIO-6PAKW. . . . . . . . . Includes CNAMPX-12X60, CNX-PAD8A, 2-Series CP2, CNHBLOCK, (4)
IRP2, (6) CNX-BF12W (White Faceplate), CNPWS-75 and Audio Six-Pack
Wizard.
C2I-AUDIO-6PAKA . . . . . . . . International Version. Includes CNAMPXI-12X60, CNX-PAD8A, 2-Series
CP2, CNHBLOCK, (4) IRP2, (6) CNX-BF12A (Almond Faceplate),
CNPWSI-75 and Audio Six-Pack Wizard.
C2I-AUDIO-6PAKB. . . . . . . . . International Version. Includes CNAMPXI-12X60, CNX-PAD8A, 2-Series
CP2, CNHBLOCK, (4) IRP2, (6) CNX-BF12B (Black Faceplate), CNPWSI-75
and Audio Six-Pack Wizard.
C2I-AUDIO-6PAKW . . . . . . . . International Version. Includes CNAMPXI-12X60, CNX-PAD8A, 2-Series
CP2, CNHBLOCK, (4) IRP2, (6) CNX-BF12W (White Faceplate), CNPWSI-75
and Audio Six-Pack Wizard.
132
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
V I D E O D I S T R I B U T I O N & CO N T RO L
V I D E O D I S T R I B U T I O N S YS T E M S
New for 2003
CNX-PVID8X3 – Professional Video Distribution
System, 3 Levels of 16x8 Switching plus 8 Rooms
of CAT5 Output
The CNX-PVID8x3 is the world’s only professional CAT5 video distribution system,
delivering video from up to 48 separate video sources into as many as 24 separate rooms
and areas. It accepts NTSC/PAL Composite Component sources and S-Video, including
HDTV signals, and distributes them to display devices in various rooms via standard CAT5
structured wiring.This revolutionary distribution method utilizes a balanced signal for
long runs, making it possible to equalize, adjust and boost the gain of the video signal
for the perfect picture.
The CNX-PVID8x3’s unique design features three tiers of video inputs and outputs, each
highly configurable for a combination of video formats. Each of the three tiers of switcher
boards implements a video matrix with 16 RCA inputs and 8 RCA outputs for direct
connection to local display devices. In addition, the PVID8 contains a total of 8 RJ45
outputs for distributing any of these video signals via CAT5 to up to 8 rooms. Everything
has a built-in Video Sync Sensor that reports power/activity status of all source devices
attached to the PVID8. Extensive configuration flexibility is permitted through a
combination of internal jumpers and programming. Configure for up to 48 Composite
inputs, ideal for switching banks of security cameras. Or create a combination of
Composite, Component and S-Video inputs and outputs for a sophisticated array of
needs.The flexibility is nearly limitless.
Connectors:
Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 tiers of 16 inputs, each with 2 RCA jacks connected in parallel (1 for
video input, 1 for termination or loop-through).
Input termination . . . . . . . . . . 3 tiers of 16 RCA terminators (75 ohm provided)
Outputs . . . . . . . . . . . . . . . . . . 3 tiers of 8 RCA jacks for single-ended (local) video, and 8 RJ45 for
differential (CAT5) video
Cresnet. . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin network connector used to supply power and connect the CNXPVID8x4 to the Cresnet system
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the Cresnet system and the CNXPVID8x3
Output 1-8 . . . . . . . . . . . . . . . . . . . . . . Indicates a CAT5 video source signal is routed to the corresponding
room
Active Video Input 1-16 . . . . . . . . . . . Video sync indicators identify active inputs on the selected tier (board)
Select 1-3 . . . . . . . . . . . . . . . . . . . Indicates which tier (board) of inputs is selected with pushbutton
switch
CNX-PVID8X3 continued on next page
133
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
V I D E O D I S T R I B U T I O N & CO N T RO L
V I D E O D I S T R I B U T I O N S YS T E M S c o n t i n u e d
CNX-PVID8X3 c o n t i n u e d f r o m p r e v i o u s p a g e
Input/Output Configurations: . . . . . . Split board and jumpered board operation allows
dozens of configurations, including:
•Three boards operated in parallel: . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 sources/8 outputs of Component video
•Three boards operated independently: . . . . . . . . . . . . . . . . . . . . . . . 48 sources/24 outputs of Composite video
•Top board connected to lower board: . . . . . . . . . . . . . . . . . . . . . . . . 16 sources/8 outputs of S-Video,
16 sources/8 outputs of Composite video
•Top board split and half connected to lower board: . . . . . . . . . . . . 8 sources/4 outputs of Component video
plus 8 sources/4 outputs of S-Video plus
8 sources/4 outputs of Composite video
Video Bandwidth . . . . . . . . . . . . . . . . . 100 MHz Per tier
Power Requirements . . . . . . . . . . . . . . 24VDC, 1.5 A, 30W
Dimension (HxWxD) . . . . . . . . . . . . . . 5.25” (13.3cm) x 17.5” (44.5cm) x 8.75” (22.2cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 lb (3.6 kg)
New for 2003
CNX-PVID8X4 – Professional Video Distribution
System, 4 Levels of 16x8 Switching plus 8 Rooms of
CAT5 Output
The CNX-PVID8x4 is the world’s only professional CAT5 video distribution system,
delivering video from up to 64 separate video sources into as many as 32 separate rooms
and areas. It accepts NTSC/PAL Composite Component sources and S-Video, including
HDTV signals, and distributes them to display devices in various rooms via standard CAT5
structured wiring.This revolutionary distribution method utilizes a balanced signal for
long runs, making it possible to equalize, adjust and boost the gain of the video signal for
the perfect picture.
The CNX-PVID8x4’s unique design features four tiers of video inputs and outputs, each
highly configurable for a combination of video formats. Each of the four tiers of switcher
boards implements a video matrix with 16 RCA inputs and 8 RCA outputs for direct
connection to local display devices.The top board may also be used for 16 channels of
distributed digital audio. In addition, the PVID8 contains a total of 8 RJ45 outputs for
distributing any of these video signals via CAT5 mode to up to 8 rooms. Every input has a
built-in Video Sync Sensor that reports power/activity status of all source devices attached
to the VID8. Extensive configuration flexibility is permitted through a combination of
internal jumpers and programming. Configure for up to 64 Composite inputs, ideal for
switching banks of security cameras. Or create a combination of Composite, Component
and S-Video inputs and outputs for a sophisticated array of needs.The flexibility is nearly
limitless.
Connectors:
Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 tiers of 16 inputs, each with 2 RCA jacks connected in parallel (1 for
video input, 1 for termination or loop-through).Top level may be used
for digital audio.
Input termination. . . . . . . . . . . . . 4 tiers of 16 RCA terminators (75 ohm)
Outputs . . . . . . . . . . . . . . . . . . . . . . . . . 4 tiers of 8 RCA jacks for single-ended (local mode) video, and 8 RJ45
for differential (CAT5 mode) video
Cresnet. . . . . . . . . . . . . . . . . . . . . . 4-pin network connector used to supply power and connect the CNXPVID8x4 to the Cresnet system
CNX-PVID8X4 continued on next page
134
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
V I D E O D I S T R I B U T I O N & CO N T RO L
V I D E O D I S T R I B U T I O N S YS T E M S c o n t i n u e d
CNX-PVID8X4 c o n t i n u e d f r o m p r e v i o u s p a g e
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the Cresnet system and the CNXPVID8x4
Output 1-8 . . . . . . . . . . . . . . . . . . . . . . Indicates a CAT5 video source signal is routed to the corresponding
room
Active Video Input 1-16 . . . . . . . . . . . Video sync indicators identify active inputs on the selected tier (board)
Select 1-4 . . . . . . . . . . . . . . . . . . . Indicates which tier (board) of inputs is selected with pushbutton
switch
Input/Output Configurations: . . . . . . Split board and jumpered board operation allows dozens of
configurations, including:
•Three boards operated in parallel, one board independently: . . . .16 sources/8 outputs of Component video
plus 16 sources/8 outputs of digital audio
(or uncompensated composite video)
•Four boards operated independently: . . . . . . . . . . . . . . . . . . . . . . . .64 sources/32 outputs of Composite video
•Second board connected to lower board: . . . . . . . . . . . . . . . . . . . . .16 sources/8 outputs of S-Video, 16
sources/8 outputs of composite Video plus
16 sources/8 outputs of Digital audio (or
uncompensated composite video)
•Second board split and half connected to lower board: . . . . . . . .8 sources/4 outputs of Component video
plus 8 sources/4 outputs of S-Video plus 8
sources/4 outputs of Composite video plus
16 sources /8 outputs digital audio (or
uncompensated composite video)
Video Bandwidth . . . . . . . . . . . . . . . . . 100 MHz Per tier
Power Requirements . . . . . . . . . . . . . . 24VDC, 1.67A, 40W
Dimension (HxWxD) . . . . . . . . . . . . . . 6.97” (17.7cm) x 17.29” (43.9cm) x 8.45” (21.5cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 9.81 lb (4.45 kg)
New for 2003
CNX-PBVR4 – 4 Room CAT5 Professional
Balanced Video Receiver
The CNX-PBVR4 is a 4-room CAT5 to RCA video receiver that converts balanced video to
single-ended video signals.The CNX-PBVR4 is great for converting CAT5 Video from
CNX-RMCLV Room box to single ended video for connection to any CNX-PVID8x3 or
CNX-PVID8x4.
Connectors:
CAT5 Video Inputs . . . . . . . . . . . . 4 RJ45 CAT5 (A-D), 4 video signals per connector
Video Input Compensation. . . . . Signals 1-3, for each of the 4 CAT5 video inputs are independently
adjustable to compensate for varying CAT5 cable lengths.The fourth
signal has a fixed compensation network and is intended for digital
audio.
Video Outputs. . . . . . . . . . . . . . . . 16 RCA: 4 sets of 4 connectors
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to the unit
Video Bandwidth . . . . . . . . . . . . . . . . . 35MHz
Power Requirements . . . . . . . . . . . . . . 12VDC, .5A
135
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
R E S I D E N T I A L RO O M S O LU T I O N S
R O O M S O LU T I O N B OX E S
New for 2003
CNXRMC – Room Control plus CAT5 Video
The CNXRMC, a companion product for the CNX-PVID8 video switcher/distribution
system, provides a solution for distributing video and control with standard CAT5 cabling.
With a CNXRMC located in each room as a mini-switcher, you can choose any video
source from the head end and display it on the monitor or projector in that room.
The RMC breaks out the baseband video signals fed from the PVID8 via the CAT5 cable.
These signals can include high-definition Component video, Digital Audio, S-Video and/or
Composite video.
The CNXRMC also functions as a Cresnet room control interface to local AV and other
devices such as TVs, Projectors,VCRs, and DVD players. One bi-directional RS-232 and four
IR ports are provided. A current sensor input accepts power status feedback from the
optional CNXRMCS current sensor (available separately.) In addition, a powered IR input
allows connection of the optional CNX-RMIRD IR sensor (available separately) to receive IR
commands from a Philips Pronto® or similar universal remote control, which may be
programmed to control any device connected to the Cresnet system. Naturally, any
Crestron touchpanel or pushbutton control panel may be used with the CNXRMC as well.
Connectors:
Head End Video Input . . . . . . . . . RJ45 CAT5 (1-4) 4 channels of balanced video with cable length
compensation
Video Outputs A-G. . . . . . . . . . . . 7 RCA
Video Input Compensation 1-3 . Adjustable independently by video input to compensate for varying
CAT5 cable lengths.The fourth signal has a fixed compensation
network and is intended for digital audio.
RS-232 Output . . . . . . . . . . . . . . . 6-Pin RJ-11
IR Input . . . . . . . . . . . . . . . . . . . . . 1 mini stereo phone jack (power, ground, signal)
IR Output . . . . . . . . . . . . . . . . . . . . 4 mini phone phone jack (ground, signal)
Sens Input . . . . . . . . . . . . . . . . . . . 2-pin mini-phoenix contact closure connector for use with a current
sensor to detect power status of devices such as televisions.
Cresnet. . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin mini-phoenix network connector used to supply power and
connect the CNXRMC to the Cresnet system
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the Cresnet system and the
CNXRMC
Setup . . . . . . . . . . . . . . . . . . . . . . . LED/pushbutton switch for use with future functions
Crosstalk . . . . . . . . . . . . . . . . . . . . . . . . <60dB
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.25A, 6W
Dimensions (HxWxD) . . . . . . . . . . . . . 1.94” (4.93cm) x 7.48” (18.99cm) x 5.00” (12.70cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.17 lb (0.53 kg)
136
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
R E S I D E N T I A L RO O M S O LU T I O N S
R O O M S O LU T I O N B OX E S c o n t i n u e d
New for 2003
CNXRMCLV – Room Control plus Bi-Directional
CAT5 Video plus Audio
The CNXRMCLV, a companion product for the CNX-PVID8 video switcher/distribution
system, provides a solution for distributing video and control with standard CAT5 cabling
while incorporating local video sources in each room.With a CNXRMCLV located in each
room as a mini-switcher, you can choose any video source from the head end and display
it on the monitor or projector in that room.The RMC breaks out the baseband video
signals fed from the PVID8 via the CAT5 cable.These signals can include high-definition
Component video, Digital Audio, S-Video and/or Composite video. A second CAT5
connection provides for sending “return” video signals from local room sources to th
PVID8A for distribution throughout the house (CNX-PBVR4 required).
The CNXRMCLV also functions as a Cresnet room control interface to local AV and other
devices such as TVs, Projectors,VCRs, and DVD players. One bi-directional RS-232 and four
IR ports are provided. A current sensor input accepts power status feedback from the
optional CNXRMCS current sensor (available separately.) In addition, a powered IR input
allows connection of the optional CNX-RMIRD IR sensor (available separately) to receive IR
commands from a Philips Pronto® or similar universal remote control, which may be
programmed to control any device connected to the Cresnet system. Naturally, any
Crestron touchpanel or pushbutton control panel may be used with the CNXRMCLV
as well.
Connectors:
Head End Video Inputs . . . . . . . . RJ45 CAT5 (1-4) 4 channels of balanced video with cable length
compensation on 1-3.
Local Video Inputs . . . . . . . . . . . . 4 RCA with built-in 75 ohm termination (5-8) All 4 inputs have video
sensor capability
Head End Video Return . . . . . . . . RJ45 (E-H) 4 channels of balanced video
Local Video Outputs. . . . . . . . . . . 8 RCA (A-H)
Video Input Compensation 1-3 . Adjustable independently by video input to compensate for varying
CAT5 cable lengths.The fourth signal has a fixed compensation
network and is intended for digital audio.
Local Audio Inputs . . . . . . . . . . . . 6 RCA (3 stereo pairs)
Local Audio Outputs . . . . . . . . . . 4 RCA with built-in volume & tone control(2 stereo pairs, primary and
record)
Head End Audio Input/Output. . RJ45 Balanced full duplex bi-directional stereo audio
RS-232 Output . . . . . . . . . . . . . . . 6-Pin RJ-11
IR Input . . . . . . . . . . . . . . . . . . . . . 1 mini stereo phone jack (power, ground, signal)
IR Outputs . . . . . . . . . . . . . . . . . . . 4 mini phone phone jack (ground, signal)
SENS Input. . . . . . . . . . . . . . . . . . . 2-pin mini-phoenix contact closure connector for use with a current
sensor to detect power status of devices such as televisions.
Cresnet. . . . . . . . . . . . . . . . . . . . . . 4-pin mini-phoenix network connector used to supply power and
connect the CNXRMCLV to the Cresnet system
CNXRMCLV continued on next page
137
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
R E S I D E N T I A L RO O M S O LU T I O N S
R O O M S O LU T I O N B OX E S c o n t i n u e d
CNXRMCLV c o n t i n u e d f r o m p r e v i o u s p a g e
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Indicates power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication between the Cresnet system and the
CNXRMCLV
Setup . . . . . . . . . . . . . . . . . . . . . . . LED/pushbutton switch for use with future functions
Video:
Local Video Bandwidth . . . . . . . . 60 MHz
Crosstalk . . . . . . . . . . . . . . . . . . . . <60dB
Audio:
Maximum Input Level . . . . . . . . . 3.2 VRMS
Maximum Output Level . . . . . . . 2.5 VRMS
THD. . . . . . . . . . . . . . . . . . . . . . . . . <0.02%
Signal/Noise . . . . . . . . . . . . . . . . . >100dB
Gain Range . . . . . . . . . . . . . . . . . . -80dB to +20dB
Volume Steps . . . . . . . . . . . . . . . . 100(1db/step)dB
Bass Control . . . . . . . . . . . . . . . . . +/-12dB
Treble Control . . . . . . . . . . . . . . . . +/-12dB
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.5A, 12W
Dimensions (HxWxD) . . . . . . . . . . . . . 1.94” (4.93cm) x 11.6” (29.5cm) x 7.00” (17.78cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.31 lb (1.05 kg)
New for 2003
CNX-RMIRD – IR Detector for Room Control
The CNX-RMIRD is the IR detector accessory used with the CNXRMC and CNXRMCLV. It can
receive 38KHz infrared transmissions from RC5 and Sharp-compatible remote controls.
New for 2003
CNXRMCS – Current Sensor for Room Control
The CNXRMCS is a companion product for the CNXRMC and CNXRMCLV. It provides true
power status feedback (on or off) for high power AC devices such as TV monitors and
video projectors. It contains an AC plug on one side and an AC outlet on the other, along
with a cable which attaches to the SENS Input of the RMCLV.
Connector . . . . . . . . . . . . . . . . . . . . . . . 2-pin mini-phoenix contact closure connector
Maximum AC Load . . . . . . . . . . . . . . . 10A, 1KW at 120VAC
Cable Length. . . . . . . . . . . . . . . . . . . . . 6’ (1.83m)
Dimensions (HxWxD) . . . . . . . . . . . . . 3.16” (8.03cm) x 2.04” (5.18cm) x 1.93” (4.90)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.60 oz (0.20 kg)
138
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
E T H E R N E T S O LU T I O N S
e - C O N T R O L ™ E T H E R N E T C O N T R O L S O LU T I O N S
CEN-IO – 10BaseT Ethernet Analog/Digital
Input/Output Module
Communicating via standard Internet Protocol, the CEN-IO provides a host of options for
maximum control over a LAN,WAN or the Internet. Ideal for controlling low voltage
contact closure devices such as lights, screens and drapes, the CEN-IO is an Ethernet device
with 8 low voltage relays and 8 Versiport digital/analog input/outputs.
Ports:
12VDC .5A . . . . . . . . . . . . . . . . . . . This DC power socket connector is used to supply power via an
external power pack (Included)
PC . . . . . . . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used to load the IP address
and run diagnostics
I/O 1-8 . . . . . . . . . . . . . . . . . . . . . . This 9-pin connector is used to detect digital and analog
input/output levels
RELAY OUTPUT 1-8. . . . . . . . . . . . This 12-pin connector provides eight normally open relays. Everytwo
relays share a common wiper. Each relay closure is rated at 24VDC/AC,
1A
ETHERNET . . . . . . . . . . . . . . . . . . . This 8-pin, 8-position RJ45 port connects the CEN-IO to a 10BaseT
Ethernet/LAN or WAN via a hub
Relay Closure Rating . . . . . . . . . . . . . . 24VAC/DC, 1A
Input Threshold . . . . . . . . . . . . . . . . . . 2.5VDC (per channel)
Input Analog Voltage Range . . . . . . . 0 to +10VDC (per channel)
Input Digital Voltage Range . . . . . . . . 0 to +24VDC (per channel), compatible with TTL and
CMOS digital signals
Switch Current . . . . . . . . . . . . . . . . . . . 2.5mA (per channel, contact closure to ground)
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when operating power is supplied to the unit. Operating
power is supplied by the external AC power pack that provides 12VDC
ETHERNET:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during reception of Ethernet date
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during transmission of Ethernet date
LNK . . . . . . . . . . . . . . . . . . . . . . Illuminates when there are attachments to the Ethernet network
ERR . . . . . . . . . . . . . . . . . . . . . . Illuminates when an Ethernet protocol error is detected
RELAY 1-8 . . . . . . . . . . . . . . . . . . . Illuminates when respective relay is closed
I/O 1-8 . . . . . . . . . . . . . . . . . . . . . . Illuminates when input or output voltage threshold for respective
INPUT port is exceeded
Dimensions (HxWxD) . . . . . . . . . . . . . 1.7" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.90lbs (0.86Kg)
MODEL OPTIONS:
All the features of the CEN-IO, with the following exceptions:
CENI-IO . . . . . . . . . . . . . . . . . . . . . . International Version, 220V
139
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
E T H E R N E T S O LU T I O N S
e - C O N T R O L ™ E T H E R N E T C O N T R O L S O LU T I O N S c o n t i n u e d
CEN-COM – 10BaseT Ethernet Dual
RS-232/422/485 Module
Communicating over standard Internet Protocol,the CEN-COM provides a host of options for
maximum control over a LAN,WAN or the Internet.Ideal for controlling cameras,switchers and
projectors,the CEN-COM is an Ethernet device with two independent bi-directional serial ports
that can support asynchronous RS-232/422/485-based communication.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal with silk-screened labels on the front and rear panels.
Connections . . . . . . . . . . . . . . . . . . . . . All are made on the back of the unit, except for Ethernet port on front panel.
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when operating power is supplied to the unit. Operating
power is supplied by the external AC power pack that provides 12VDC.
ETHERNET:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during reception of Ethernet data.
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during transmission of Ethernet data.
LNK . . . . . . . . . . . . . . . . . . . . . . Illuminates when there are attachments to the Ethernet network
ERR . . . . . . . . . . . . . . . . . . . . . . Illuminates when an Ethernet protocol error is detected.
RXD (COM A&B):. . . . . . . . . . . . . . Flashes when data is received from the
serial device attached to the respective COM ports.
TXD (COM A&B):. . . . . . . . . . . . . . Flashes when data is transmitted to the
serial device attached to the respective COM ports.
RTS (COM A&B): . . . . . . . . . . . . . . If RTS/CTS handshaking is enabled, these LEDs illuminate when the
CEN-COM is ready to receive data from a serial device attached to
the respective COM ports.
CTS (COM A&B): . . . . . . . . . . . . . . Illuminates when the serial device on the respective COM port is ready
to accept data.This "Clear To Send" signal is available only if RTS/CTS
handshaking is enabled; signal is controlled by external serial device. If
CTS signal is not connected (in cable), the signal is held high and the
LEDs are extinguished.
Power Requirements: . . . . . . . . . . . . . 12 or 24VDC, Load Factor of 2.5W
AC Power Pack Specifications:
PW-1205 . . . . . . . . . . . . . . . . . . . . Input - 120V~60Hz
Output - 12VDC .5 A
PWI-1210. . . . . . . . . . . . . . . . . . . . Input - 230V~50Hz
Output - 12VDC 1A
Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12VDC .5 A . . . . . . . . . . . . . . . . . . This DC power socket connector is used to supply power via an
external power pack.
PC . . . . . . . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used to load the IP address
and run diagnostics.
COM A/B . . . . . . . . . . . . . . . . . . . . These two 9-pin connectors (DB9) connect to serial equipment.These
bidirectional serial ports are used for RS-232, RS-422, or RS-485
communication.
ETHERNET . . . . . . . . . . . . . . . . . . . . . . . This 8-pin, 8-position RJ45 port connects the CEN-COM to a 10BaseT
Ethernet/LAN or WAN via a hub.
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.90lb (0.86Kg)
MODEL OPTIONS:
All the features of the CEN-COM, with the following exceptions:
CENI-COM . . . . . . . . . . . . . . . . . . . International Version; 220V
140
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
E T H E R N E T S O LU T I O N S
e - C O N T R O L ™ E T H E R N E T C O N T R O L S O LU T I O N S c o n t i n u e d
CEN-T VAV – 10BaseT Ethernet Programmable
TV/AV controller
The CEN-TVAV is an Ethernet-based remote television/audio-visual (TV/AV) controller for
devices such as TVs,VCRs, switchers and DVD players. Communicating via standard
Internet protocol, it provides a complete programmable control system in an economic
package. CEN-TVAV includes an IR port that can support up to five discrete AV devices, four
Versiports for digital input, digital output, or analog input, for controlling or monitoring
external equipment, an RS-232 port, a current sensor, a Cresnet port and an IR receiver for
use with a handheld remote.
LED Indicators:
PWR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV power-in cord is plugged into an
energized VAC outlet.
NET . . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when communication with the Cresnet system is occurring or
while processing commands from the PC (i.e., uploading programming).
ETHERNET:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during reception of Ethernet data.
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during transmission of Ethernet data.
LNK . . . . . . . . . . . . . . . . . . . . . . Illuminates when there are attachments to the Ethernet network.
ERR . . . . . . . . . . . . . . . . . . . . . . Illuminates when an Ethernet protocol error is detected.
INPUT-OUTPUT . . . . . . . . . . . . . . . These four LEDs illuminate while the corresponding input or output
device that is connected to the rear panel I/O is active.
TV/AV:
PWR. . . . . . . . . . . . . . . . . . . . . . Illuminated while the current sensor is detecting that the TV or AV
device connected to the power-out receptacle is ON.
IR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when IR signals are being sent to that device.
Device Power
RS-232:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV is receiving serial data from the RS-232 port
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV is sending data to the RS-232 port
IR IN . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CEN-TVAV receives a valid IR code from an
optional handheld transmitter
PORTS:
ETHERNET . . . . . . . . . . . . . . . . . . . This 8-pin, 8-position RJ45 port connects the CEN-TVAV to a 10BaseT
Ethernet/LAN or WAN via a hub
CRESNET . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector and (1) 4-pin male connector;
for expansion to Cresnet or SmarTouch peripherals; total maximum
load rating depends on expansion slot load
RS-232 . . . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used for control of RS-232
peripheral devices and to communicate with a personal computer (PC)
when programming the CEN-TVAV
I/O (1-4, G). . . . . . . . . . . . . . . . . . . Pins 1-4 of this Versiport may individually be used as programmable digital
inputs, digital outputs, analog inputs, or any combination of each.
IR. . . . . . . . . . . . . . . . . . . . . . . . . . . This 3.5mm mini-jack is used by the STIRP (provided) to control an
attached TV or AV device
POWER OUT . . . . . . . . . . . . . . . . . This receptacle provides AC power to an attached TV or AV device.
POWER IN . . . . . . . . . . . . . . . . . . . This attached power cord supplies operating AC power to the CENTVAV and the attached TV or AV device, as well as current sensing for
the plugged in device
Function Modes . . . . . . . . . . . . . . . . . . Local Processing Mode, Remote Processing Mode, Mixed Mode
Ethernet Protocols:. . . . . . . . . . . . . . . . TCP/IP, UDP/IP, ICMP (Ping) and CIP
Ethernet Type . . . . . . . . . . . . . . . . . . . . 10BaseT
Power Requirements . . . . . . . . . . . . . . 115VAC, 50-6- Hz, 6.6A maximum
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.63lbs (1.65Kg)
MODEL OPTIONS:
All the features of the CEN-TVAV, with the following exceptions:
CENI-TVAV . . . . . . . . . . . . . . . . . . International Version; 220V
141
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
E T H E R N E T S O LU T I O N S
e - C O N T R O L ™ E T H E R N E T C O N T R O L S O LU T I O N S c o n t i n u e d
CEN-CN – 10BaseT Ethernet to Cresnet Interface
CEN-CN is used to connect Crestron network (Cresnet) equipment to a Crestron
e-Control™ capable control system through an Ethernet, LAN or WAN. Using
standard IP Internet protocol, CEN-CN can transport Cresnet data over Ethernet.
Ethernet Protocols . . . . . . . . . . . . . . . . TCP/IP, UDP/IP, ICMP (Ping) and CIP
INDICATORS:
PWR . . . . . . . . . . . . . . . . . . . . . . . . This LED (green) illuminates when operating power is supplied to the
CEN-CN. Operating power may be supplied either by the external AC
power pack (included) that provides 12VDC or supplied by 24VDC via
the 4-wire CEN-CN Cresnet system wiring.
NET . . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when communication with the CEN-CN Cresnet system
device is occurring.
ETHERNET:
RXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during reception of Ethernet data.
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates during transmission of Ethernet data.
LNK . . . . . . . . . . . . . . . . . . . . . . Illuminates when there are attachments to the Ethernet network.
ERR . . . . . . . . . . . . . . . . . . . . . . Illuminates when an Ethernet protocol error is detected.
PORTS:
12VDC .5 A . . . . . . . . . . . . . . . . . . This DC power socket connector is used to supply power via an
external power pack.
PC . . . . . . . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used to communicate
with a PC when performing the configuration of the CEN-CN or for
troubleshooting diagnostics.
NET . . . . . . . . . . . . . . . . . . . . . . . . . The NET 6-pin, 6-position RJ11 modular jack is used for expansion to
SmarTouch peripheral(s) or other modular Cresnet slave devices.This
port is connected in parallel to the two 4-pin network connectors
described as follows.The two NET 4-pin network connectors are used
to connect the 4-wire Cresnet devices to the CEN-CN.
ETHERNET . . . . . . . . . . . . . . . . . . . This 8-pin, 8-position RJ45 port connects the unit to a 10BaseT
Ethernet/LAN or WAN via a hub.
Power Requirements . . . . . . . . . . . . . . 12VDC, .5A
Dimensions (HxWxD) . . . . . . . . . . . . . 1.7" (4.32cm) x 6.94" (17.63cm) x 6.32" (16.05cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.87lbs (0.85Kg)
MODEL OPTIONS:
All the features of the CEN-CN, with the following exceptions:
CENI-CN . . . . . . . . . . . . . . . . . . . . . International Version; 220V
142
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S O F T WA R E S O L U T I O N S
e - C O N T R O L ™ S O F T WA R E
New for 2003
E-CONTROL – Power Applications
Crestron e-Control™ Power Applications provide real world solutions that allow your
customers to take advantage of the power of the industry standard in network-based
control solutions. Power Applications provide a host of sophisticated features that can be
used every day to make presentations, maintain equipment and more, in easy-to-use
applications from corporate room scheduling and control using Microsoft Outlook® to
control of PowerPoint® applications directly from any Crestron touchpanel. All e-Control
Power Applications run on standard 10/100 BaseT networks, are license-free and require
no special servers or server software.
POWER APPLICATIONS
e-Dial . . . . . . . . . . . . . . . . . . . . . . . . . With e-Dial, a user can centrally manage multiple sites (such
videoconference rooms), numbers and data rates. Simply scroll
through the list of sites on the Crestron touchpanel, select the name,
and e-Dial seamlessly connects the conference call.
e-Start. . . . . . . . . . . . . . . . . . . . . . . . With e-Start, press the e-Start icon on a Crestron touchpanel to start up
any Microsoft application on a Windows-based PC. Crestron’s e-Start
adds touchpanel convenience to launch popular applications such as
Microsoft PowerPoint, Excel, Access,Word and Explorer.
e-PowerPoint . . . . . . . . . . . . . . . Using e-PowerPoint, a presenter can let the audience see any
PowerPoint presentation on a big screen, while viewing speaker notes,
slide titles, etc, and also control all the features of a PowerPoint
presentation —- all from a Crestron touchpanel.
e-Outlook . . . . . . . . . . . . . . . . . . . With e-Outlook, Crestron has exclusive controls that can be added to
any client using Microsoft Outlook to provide a simple, familiar
interface that opens up a world of control. For applications such as
room scheduling, simply select the room to reserve in the normal
fashion in Outlook, pick a time, click on the built-in Crestron tab and
select any of ten presets, including PC Presentation, Audio Conference,
DVD Show, Room Off, etc.
e-Datalog . . . . . . . . . . . . . . . . . . . . By adding e-Datalog, a Crestron control system can log standard room
functions to an easy-to-use graphical database powered by Microsoft
Access. With e-Datalog, a user can easily track functions such as time
and date when equipment is used, who used a room, the duration of
use, and more.
e-Email . . . . . . . . . . . . . . . . . . . . . . . Now with Crestron’s e-Email, you’ll prevent problems such as lamp
burnouts and videoconference disconnections. The key is the ability to
monitor system and equipment status from any room via e-Control
with custom or programmed text messages.With e-Email, the user can
program in an unlimited number of different text messages.
Outlook®, PowerPoint®, Excel®, Word®, Access®, Internet Explorer ® and Windows® are trademarks of Microsoft Corporation.
143
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S O F T WA R E S O L U T I O N S
e - C O N T R O L ™ S O F T WA R E
New for 2003
E-CONTROL 2 – New Generation Software
Crestron’s e-Control 2 extends the capabilities of Crestron e-Control™ technology.
This new generation of the industry-standard for Internet-based control includes
e-Control IE, e-Control .EXE and e-Control PDA.
E-CONTROL 2
e-Control IE . . . . . . . . . . . . . . . . . Using ActiveX technology, Crestron’s e-Control IE allows a user to
accurately and efficiently emulate any Crestron touchpanel on an
Internet Explorer web browser.
e-Control .EXE . . . . . . . . . . . . . . Allows Crestron to deliver fast, consistent panel-like behavior as a
standalone Windows-based run-time executable that can be launched
locally from the Windows desktop. Crestron e-Control .EXE also serves
as a touchpanel emulator for testing, development and client review of
panel pages.
e-Control PDA . . . . . . . . . . . . . . This application brings the power of Crestron e-Control to any Windows
CE/Pocket PC operated Personal Digital Assistant (PDA).
144
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S O F T WA R E S O L U T I O N S
e - C O N T R O L ™ S O F T WA R E
SW-DBM – e-Database ™
Database Manager Software
Crestron e-Database allows users to share common information from a Microsoft Access®
database among Crestron control systems and touchpanels anywhere in the world via
Ethernet/Internet. Common applications include management and distribution of speeddial numbers for video conferencing and distance learning facilities.
Windows® 95/98 Operating System:
32 MB RAM
100 MB hard drive space
133 MHz or faster Pentium processor . . A faster processor is recommended for serving multiple connections
simultaneously.
Windows NT Operating System:
64 MB RAM
100 MB hard drive space
166 MHz or faster Pentium processor
640 x 480 or higher screen resolution
Network Interface Card . . . . . . . . Required to make TCP/IP connections to control systems
Auxiliary software:
CNX-EGWY . . . . . . . . . . . . . . gateway required for TCP/IP (Ethernet) connections between
the server and control systems (only for CNXENET card).
SW-SCHEDULE – e-Schedule ™ Web-based
Scheduling Software
Crestron e-Schedule is an enterprise software package designed to allow resource
sharing and routing for corporate and university boardrooms, videoconference rooms,
and training rooms. It allows users to select and schedule resources remotely using
Microsoft® Internet Explorer® 5.0 web browser, and provides conflict checking, recurring
events and much more. e-Schedule is Crestron factory configured for each application.
Web server PC Hardware:
512 MB RAM
1 GHz Pentium III Processor
Network Interface Card . . . . . . . . Required to make TCP/IP connections to control systems
TCP/IP
Web server PC Operating System & Software:
Windows® NT Server 4.0 with Service Pack 4
Windows NT Server 4.0 Option Pack or later (Internet Information Server 4.0 included)
Internet Explorer 5.0
Microsoft Access 2000
Firewall (optional, but recommended)
Web server PC Crestron Software:
CNX gateway
Active Server Pages
Database Directory
Browser PC Hardware . . . . . . . . . . . . . 166 MHz Pentium Processor
Browser PC Operating System & Software:
Windows 95/98/NT
Internet Explorer 5.0
All brand names, product names and trademarks are the property of their respective owners.
145
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
S O F T WA R E S O L U T I O N S
CONTROL SYSTEM PROGRAMMING SOFTWARE
New for 2003
SW-COMPAK – Crestron Application Builder™
Software, Commercial Version
Crestron Application Builder™ is the most powerful control programming platform ever,
offering a host of tools, templates and automated operations that compress
programming time from hours to only minutes. Supporting all Crestron control systems,
including the 2-Series products, it integrates both system programming and touchpanel
page building, with application-specific plug-ins that go far beyond traditional software
wizards.
The standard free package comes with Audio Distribution applications and may be
downloaded from the Crestron website (www.crestron.com/updates).With optional plugins for Boardrooms,Videoconferencing, Lighting, Home Theater and more, even novices
can point-and-click to program an entire system with ease. Power users will add deeper
enhancements to even the most complex custom applications in record time by using
Application Builder to create the core program and then launching SIMPL Windows and
VTPro-e for the finishing touches.The latest software and database versions are always
immediately available with Application Builder’s web-based LiveUpdate feature.
Programming is a simple matter of just a few steps:
Control System: Choose any model of Crestron control system as the “brains” of the system.
Rooms: Select the type of system, such as Boardroom or Videoconferencing, and the number of rooms.
Application Builder automatically adds the necessary Crestron components.
Interfaces: Choose among Crestron’s wide range of touchpanels and keypads, and assign them to each
room. Application Builder automatically loads standard or custom touchscreen and button templates.
Devices: Choose devices from Crestron’s database of thousands of professional and consumer models, or
add your own devices. Name each device and assign it to a room and plug-in. Application Builder
automatically creates the program logic and GUI.
Programming: Customize the touchpanel look, assign functions to buttons and create complex macros like
“Start Conference,” all within the program.
Finish: Application Builder automatically builds the entire system, creating and compiling the SIMPL™
Windows® control program and setting network IDs.When the system is installed on-site, it uploads the
control program and touchpanel pages, and verifies that all hardware is correctly wired and network IDs are
correctly assigned.The software also creates HTML equipment reports which are ideal documentation for
installation, troubleshooting, quotes and proposals.
Application Builder’s Audio Distribution applications are available at no charge and may be downloaded
from the Crestron website (www.crestron.com/updates). Optional plug-ins are available for separate
purchase.
Free Applications . . . . . . . . . . . . . . . . . Audio Distribution
Optional Plug-in Applications . . . . . . Boardrooms (including Videoconferencing), Lighting and Auxiliary
(drapes, screens, etc.)
PC Requirements:
Minimum Configuration . . . . . . . Windows 98/NT/2000: 333MHz Pentium II, 64MB RAM; A display setting
of 256 colors
Recommended Configuration . . Windows 98/NT/2000: 700MHz Pentium 4, 128MB RAM;
A display setting of 65,000 colors or higher
MODEL OPTIONS:
All the features of SW-COMPAK with the following exceptions:
SW-RESPAK . . . . . . . . . . . . . . . . . Application Builder software for Residential applications
Optional Plug-in Applications . . . . . . Home Theater, Lighting and Auxiliary (drapes, screens, etc.) applications.
146
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
N E T W O R K I N T E R FA C E A N D P O W E R S O L U T I O N S
N E T W O R K I N T E R FAC E A N D P OW E R S O LU T I O N S
CNTS-N – Cresnet Network Temperature Sensor
The CNTS-N is a temperature sensor module that communicates with the Cresnet control
system.The sensor measures ambient room temperature and delivers a temperature
reading to a touchpanel for display.The temperature reading may be programmed to
display Fahrenheit and/or Celsius, with or without fractional parts.The CNTS-N is designed
for wall mounting using a standard single-gang electrical box.
Temperature Range . . . . . . . . . . . . . . . 32 to 122 degrees Fahrenheit/0 to 50 degrees Celsius
Wires (24,Y, Z, G). . . . . . . . . . . . . . . . . . (4) wires; connects to the Cresnet control system
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 0.5W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Wall mount; 1-gang electrical box; white plastic front and bezel
Dimensions (HxWxD) (w/Bezel) . . . . 4.625" (11.75cm) x 2.88" (7.30cm) x 1.13" (2.86cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.54lbs (0.245Kg)
CN-T VAV – Cresnet TV/AV Controller
CN-TVAV is a remote television/audio-visual (TVAV) device controller that communicates over
standard Cresnet cables with other Crestron control systems. Its IR port can support up to five
discrete AV devices,and four Versiports for digital input,digital output or analog input can be used
for controlling or monitoring external equipment.The CN-TVAV also provides a bi-directional
RS-232 port,a current sensor,and IR receiver for use with Crestron CNIRHT-MM a handheld remote.
Power Requirements . . . . . . . . . . . . . . 115VAC, 50-60 Hz, 6.5A maximum
LED Indicators
PWR . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CN-TVAV power-in cord is plugged into an
energized VAC outlet.
NET . . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when communication with the Cresnet system is occurring
or while processing commands from the PC (i.e., uploading
programming).
INPUT-OUTPUT . . . . . . . . . . . . . . . These four LEDs illuminate while the corresponding input or output
device that is connected to the rear panel I/O is active.
TV/AV:
PWR. . . . . . . . . . . . . . . . . . . . . . Illuminated while the current sensor is detecting that the TV or
AV device connected to the power-out receptacle is ON.
IR . . . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when IR signals are being sent to that device.
RS-232:
RXD . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CN-TVAV is receiving serial data from the RS-232 port.
TXD . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CN-TVAV is sending data to the RS-232 port.
IR IN . . . . . . . . . . . . . . . . . . . . . . . . Illuminates when the CN-TVAV receives a valid IR code from an optional
handheld transmitter.
Ports
CRESNET . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used to connect the
CN-TVAV to a control system so it may be accessed as a Cresnet peripheral.
RS-232 . . . . . . . . . . . . . . . . . . . . . . This 6-pin, 6-position RJ11 modular jack is used for control of RS-232
peripheral devices and to communicate with a personal computer (PC)
when programming the CN-TVAV.
I/O (1-4, G). . . . . . . . . . . . . . . . . . . Pins 1-4 of this Versiport may individually be used as programmable
digital inputs, digital outputs, analog inputs, or any combination of each.
IR. . . . . . . . . . . . . . . . . . . . . . . . . . . This 3.5mm mini-jack is used by the STIRP (provided) to control an
attached TV or AV device.
POWER OUT . . . . . . . . . . . . . . . . . This receptacle provides AC power to an attached TV or AV device for
current-sensry
POWER IN . . . . . . . . . . . . . . . . . . . This attached power cord supplies operating AC power to the CN-TVAV
and the attached TV or AV device.
Dimensions(HxWxD) . . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.63lbs. (1.65Kg)
MODEL OPTIONS:
All the features of the CN-TVAV, with the following exceptions:
CNI-TVAV . . . . . . . . . . . . . . . . . . . . International Version; 220V
147
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
N E T W O R K I N T E R FA C E A N D P O W E R S O L U T I O N S
N E T W O R K I N T E R FAC E A N D P OW E R S O LU T I O N S c o n t i n u e d
CNECI-4A – Cresnet Electrical Control Interface
The CNECI-4A is a wall-mounted interface for AC powered devices such as drapes,screens and lifts.The
CNECI-4A contains four single-pole,double-throw relays for power control.Using the SIMPL™ Windows
program of the Cresnet system,the relays are programmed for basic operation or in any combination
or sequence.The CNECI-4A draws operating power from an AC line (selectable from 100-125VAC or
220-250VAC) that is independent of Cresnet system power.This allows for stand-alone operation prior
to (and regardless of) connection to a Cresnet system.The +24V Cresnet system power serves as backup power to energize the relays if the AC power is not available.
Connectors:
AC Power . . . . . . . . . . . . . . . . . . . . (1) 4-pin terminal for input power
RELAY 1 – RELAY 4 . . . . . . . . . . . . (4) relays for power control
LOCAL INPUTS. . . . . . . . . . . . . . . . (1) 9-pin terminal block, included; for attaching (8) local inputs
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin terminal block, included; connects to Cresnet control system
LED Indicators:
POWER. . . . . . . . . . . . . . . . . . . . . . Indicates AC or 24VDC network power supplied to unit
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication with Cresnet control network
Switches . . . . . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set identity code
Relay Closure Rating . . . . . . . . . . . . . . 5A, 1/[email protected] or 250VAC, [email protected]
Power:
AC Power Requirements . . . . . . . 100-125VAC or 220-250VAC, 50-60Hz
Cresnet Power Requirements. . . Load factor of 5.0W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Gray metal; wall mounted
Dimensions (HxWxD) . . . . . . . . . . . . . 7.00" (17.78cm) x 11.00" (27.94cm) x 2.50" (6.35cm)
Conduit knock-outs . . . . . . . . . . . . . . . Total of (5) on (3) sides; 0.75" (1.91cm) diameter each
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 5.40lbs (2.40Kg)
CNPC-1A – Cresnet Power Control Interface
The CNPC-1A provides 1800W AC power control for devices with line cords; requires relay
or solid state closure to activate. Used for rack power or device power.
Connectors:
24V, IN, SW, C . . . . . . . . . . . . . . . . . (1) 4-pin terminal block, included
AC OUTPUT . . . . . . . . . . . . . . . . . . (1) 3-prong socket connector for connection to any device
AC INPUT . . . . . . . . . . . . . . . . . . . . (1) 3-prong power cord attached; connects to AC outlet
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . (2) positions: ON overrides system control by closing relay and
activating power; SW allows momentary local control without
overriding network system
LED Indicators:
POWER. . . . . . . . . . . . . . . . . . . . . . Indicates network power
24V . . . . . . . . . . . . . . . . . . . . . . . . . Indicates 24VDC network power supplied to unit
Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . 120VDC, 15A Tungsten Load
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 1.5W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal; stackable
Dimensions (HxWxD) . . . . . . . . . . . . . 1.87" (4.74cm) x 4.20" (10.67cm) x 4.20" (10.67cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3lbs (0.6Kg)
MODEL OPTIONS:
All the features of the CNPC-1A with the following exceptions:
CNPCI-1A . . . . . . . . . . . . . . . . . . . . International version
Ratings. . . . . . . . . . . . . . . . . . . . . . 240VDC, 15A Tungsten Load
AC output . . . . . . . . . . . . . . . . . . . International power cord connected to unit (220VAC compatible);
included
148
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
N E T W O R K I N T E R FA C E A N D P O W E R S O L U T I O N S
N E T W O R K I N T E R FAC E A N D P OW E R S O LU T I O N S c o n t i n u e d
CNPCI-8 – Power Control Interface
The CNPCI-8 is a power control interface with (8) single pole, single throw relays, each
rated up to 20A for lighting, motor control etc; 125/277 VAC.The CNPCI-8 also includes (8)
low voltage inputs for local control of relay operation. Operates on Cresnet network;
includes NEMA enclosure.
Connectors:
RELAY . . . . . . . . . . . . . . . . . . . . . . . (8) isolated relays for power control
LOCAL INPUTS. . . . . . . . . . . . . . . . (1) 9-pin terminal block, included; for attaching (8) local inputs
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin terminal block, included; connects to Cresnet control network
LED Indicators:
NET POWER. . . . . . . . . . . . . . . . . . Indicates 24VDC network power supplied to unit
ID SELECT. . . . . . . . . . . . . . . . . . . . Indicates communication with Cresnet system
Switches . . . . . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set identity code
Relay Closure Rating . . . . . . . . . . . . . . 20A, @277VAC, [email protected]
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 8.0W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . NEMA-type steel
Mounting . . . . . . . . . . . . . . . . . . . . . . . Surface mount
Dimensions (HxWxD) . . . . . . . . . . . . . 15.00" (38.10cm) x 8.00" (20.32cm) x 2.50" (6.35cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2lbs (3.3Kg)
MODEL OPTIONS:
All the features of the CNPCI-8 with the following exceptions:
CLCI-8:
Mounting. . . . . . . . . . . . . . . . . . . . (1) module space of a CLC or CSTC enclosure
149
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
N E T WO R K C A M E R A CO N T RO L
N E T W O R K C A M E R A CO N T R O L
CPC-CAMI – ‘Whisper Quiet’ Pan/Tilt Head with
Built-In Cresnet Control Interface
Crestron pan/tilt heads are distinguished by their quick but smooth responsiveness and
remarkably silent operation. Crestron’s exclusive CPC-CAMI is an integrated pan/tilt head
and network control interface.
Lenses Supported . . . . . . . . . . . . . . . . Universal with head or lenses requiring from +/– 2.5 to +/– 12VDC
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited number of memorized pan/tilt head positions and
focus/zoom lens settings
Connectors:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 6-wire RJ-type connector; to Cresnet control network
LENS . . . . . . . . . . . . . . . . . . . . . . . . (1) DB15 female connector; provides (3) channels for zoom, focus and
iris as well as additional signals depending on lens
RS-232 . . . . . . . . . . . . . . . . . . . . . . (1) DB9 female connector; primarily used to control “smart” lens
Jumper Boards:. . . . . . . . . . . . . . . . . . . Activate LENS output; voltage dependent
LENS A . . . . . . . . . . . . . . . . . . . . . . +/– 12VDC differential drive
LENS B . . . . . . . . . . . . . . . . . . . . . . +/– 8VDC differential drive
LENS C . . . . . . . . . . . . . . . . . . . . . . +/– 2.5VDC single ended drive with lens supplied reference
LENS D . . . . . . . . . . . . . . . . . . . . . . +/– 6VDC differential drive
LED Indicators:
POWER. . . . . . . . . . . . . . . . . . . . . . Indicates 24VDC power supplied to unit from network
NET . . . . . . . . . . . . . . . . . . . . . . . . . Indicates communication with Cresnet control system
CALIB . . . . . . . . . . . . . . . . . . . . . . . Indicates unit entered into calibration mode
FZ . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates focus and zoom activity as the result of manual
control at the unit
Buttons:
PAN. . . . . . . . . . . . . . . . . . . . . . . . . Manual pan control of head
FOCUS . . . . . . . . . . . . . . . . . . . . . . Manual focus control of camera lens
TILT . . . . . . . . . . . . . . . . . . . . . . . . . Manual tilt control of head
ZOOM. . . . . . . . . . . . . . . . . . . . . . . Manual zoom control of camera lens
CALIB MODE . . . . . . . . . . . . . . . . . Toggles between pan/tilt and zoom/focus movement. In conjunction
with TILT (up) button enables unit to enter calibration mode.
Power Requirements . . . . . . . . . . . . . . 24VDC; network power, 60W
Max. Camera/Lens Load . . . . . . . . . . . 15lbs (6.8Kg) (balanced)
Preset Recall Resolution . . . . . . . . . . . +/– 0.25 degrees
Camera Mounting Adjustments:
Three Axis Standard. . . . . . . . . . . Height: 0.80"/2.03cm; Width: 1.75"/4.45cm; Front/Back: 2.50"/6.35cm
Mounting Hole Spacing . . . . . . . 3.00"/7.62cm to 6.25"/15.88cm
Angular Travel . . . . . . . . . . . . . . . . Tilt +/– 90 degrees
Pan . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 330 degrees
Limit Stops . . . . . . . . . . . . . . . . . . Externally adjustable for horizontal and vertical travel; easily accessible
with camera and lens in place
Unit Mounting . . . . . . . . . . . . . . . 3.75"/9.53cm diameter base with (2) screws, 2.00"/5.08cm on center;
included
Mounting Plates . . . . . . . . . . . . . . (1) flat, (1) angled; included
Drive. . . . . . . . . . . . . . . . . . . . . . . . Precision worm gear
Operating Speeds:
Pan (horizontal) . . . . . . . . . . . . . . 22.5 degrees/second
Tilt (vertical) . . . . . . . . . . . . . . . . . 20.0 degrees/second
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Vinyl-coated cast aluminum
Dimensions (HxWxD) . . . . . . . . . . . . . 6.87" (17.45cm) x 5.50" (13.97cm) x 6.64" (16.87cm)
(depth measurements without mounting plates)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 8.15lbs (3.70Kg)
150
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
N E T WO R K C A M E R A CO N T RO L
N E T W O R K C A M E R A CO N T R O L c o n t i n u e d
CPC-WMT – Wall Mount Accessory for CPC-CAMI
CPC-WMT is an attractively designed wall mount for the CPC-CAMI. At home in any
environment, it easily mounts to various surfaces.
Construction . . . . . . . . . . . . . . . . . Powdercoated steel
Mounting. . . . . . . . . . . . . . . . . . . . CPC-CAMI mounts to CPC-WMT with two 1/4 - 20 x1/2 screws
Dimensions . . . . . . . . . . . . . . . . . . 16.25" (41.28cm) long
Maximum load . . . . . . . . . . . . . . . 40lbs (88Kg)
CPC-TMT – Tripod Mount Accessory for CPC-CAMI
The CPC-TMT is a tripod adapter designed for heavy use and rapid tripod mounting of the
CPC-CAMI.
Construction . . . . . . . . . . . . . . . . . Instrument grade aluminum with black anodized finish
Mounting. . . . . . . . . . . . . . . . . . . . CPC-CAMI mounts to CPC-TMT with two 1/4 -20 screws
Dimensions . . . . . . . . . . . . . . . . . . 3.75" (9.53cm) diameter, 0.62" (1.58 cm) height
Adapters . . . . . . . . . . . . . . . . . . . . Stainless steel, provided for 1/4 - 20 or 3/8 -16 threaded tripod posts
CPC-CMT – Ceiling Mount Accessory for CPC-CAMI
The CPC-CMT is designed for easy ceiling mounting of the CPC-CAMI. It provides clearance
for both the camera and lens and can be mounted on any secure horizontal surface, and
features a pre-assembled upper plate for quick positioning.
Construction . . . . . . . . . . . . . . . . . Anodized aluminum and stainless steel
Mounting. . . . . . . . . . . . . . . . . . . . CPC-CAMI mounts to CPC-CMT with two1/4 -20x1 screws
Dimensions . . . . . . . . . . . . . . . . . . 3.0" (7.62cm) diameter, 10.5" (26.67cm) height
Maximum load . . . . . . . . . . . . . . . 40.0lbs (88.0Kg)
CPC-LMT – Lens Mount Accessory for CPC-CAMI
The CPC-LMT provides simple flexibility, with quick and rigid mounting of the CPC camera
and lens assembly. Its unique design, consisting of three mounting plates with adjustable
mounting hole spacing, eliminates the need for custom plate assemblies.
Construction . . . . . . . . . . . . . . . . . . . . . Anodized aluminum with a semi-gloss black finish
Mounting . . . . . . . . . . . . . . . . . . . . . . . CPC-CAMI mounts to CPC-LMT with two 1/4 -20 x 3/8 screws
151
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
N E T WO R K C A M E R A CO N T RO L
N E T W O R K C A M E R A CO N T R O L c o n t i n u e d
CPC-2000A – 6” Color Touchpanel
with Dual Joysticks
The CPC-2000A is a 5.7" (14.5 cm) color touchscreen control panel with dual joystick
control and adjustable speed knobs for the remote control system. It permits control of
camera pan/tilt and lens zoom/focus with speed adjustments, and stores presets for
pan/tilt/zoom/focus positions. Using the CPC-2000A, a camera control network can
accept up to 250 separate cameras or other controlled devices, at distances up to 5000
feet, without expansion modules. Must be used in conjunction with a Cresnet control
system.
Display Type . . . . . . . . . . . . . . . . . . . . . Passive matrix 256 color LCD with resistive membrane
Screen Size (HxW) . . . . . . . . . . . . . . . . 3.5" (8.89cm) x 4.70" (11.04cm)
Screen Resolution . . . . . . . . . . . . . . . . 320x240
Screen Illumination . . . . . . . . . . . . . . . Edgelit fluorescent
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Connectors . . . . . . . . . . . . . . . . . . . . . . NET (6-pin 6-position RJ11) for power and communication
with the Crestron control system
Knobs. . . . . . . . . . . . . . . . . . . . . . . . . . . Four rotary knobs for pan, tilt, focus and zoom speed adjustment
Joysticks. . . . . . . . . . . . . . . . . . . . . . . . . Two 2-axis, spring centering joysticks for Focus/Zoom and Pan/Tilt
Power Requirements . . . . . . . . . . . . . . 24VDC, 0.5A, 12W
Memory . . . . . . . . . . . . . . . . . . . . . . . . . 768 KB flash memory for display
Dimensions (HxWxD) . . . . . . . . . . . . . 4.09" (10.40cm) x 9.00" (22.86cm) x 10.07" (25.59cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.60lbs (1.63Kg)
CNXFZ – Cresnet Lens Controller
The CNXFZ is designed to provide network control of a remotely positioned camera lens.It
provides two-axis motion of the focus/zoom setting and iris control of the camera lens,and can
"memorize" settings for a virtually unlimited number of presets.The CNXFZ also incorporates a
bi-directional RS-232 port for direct connection to cameras with advanced feature controls.
Lens input voltage range . . . . . . . . . . +/-2.5 to +/-12VDC
Ports:
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 6-pin, 6-position RJ11; permits communication between unit and
control system
LENS . . . . . . . . . . . . . . . . . . . . . . . . (1) DB15 female; provides (3) channels for zoom, focus and iris as well
as additional signals depending on lens
RS-232 . . . . . . . . . . . . . . . . . . . . . . (1) DB9 female connector; primarily used to control “smart lens”
LED Indicators:
POWER
NET
CALIB
Buttons for Manual Operation
FOCUS . . . . . . . . . . . . . . . . . . . . . . Manual focus control of camera lens
ZOOM. . . . . . . . . . . . . . . . . . . . . . . Manual zoom control of camera lens
CALIB MODE . . . . . . . . . . . . . . . . . Toggles between pan/tilt and zoom/focus movement. In conjunction
with TILT (up) button enables unit to enter calibration mode.
Power Requirements . . . . . . . . . . . . . . 24VDC, 2.5A, 60W
Jumper Boards:. . . . . . . . . . . . . . . . . . . Activate LENS output; voltage dependent
LENS A . . . . . . . . . . . . . . . . . . . . . . +/– 12VDC differential drive
LENS B . . . . . . . . . . . . . . . . . . . . . . +/– 8VDC differential drive
LENS C . . . . . . . . . . . . . . . . . . . . . . +/– 2.5VDC single ended drive with lens supplied reference
Dimensions (HxWxD) . . . . . . . . . . . . . 5.50" (13.97cm) x 3.5" (8.89cm) x 1.31" (3.34cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65lbs (0.29Kg)
152
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P R E S E N TAT I O N S O L U T I O N S
P R E S E N TAT I O N S O LU T I O N S
New for 2003
CNX-DVP4 – Digital Video Processor
The CNX-DVP4 is a digital video-processor, touchpanel interface, and stand alone 2-Series
control processor that can display up to 4 real-time video/computer windows
simultaneously on a single high-resolution monitor, projector or plasma screen. Ideal for
presentations, distance learning, and command and control centers, the DVP4 combines a
unique set of features to deliver a complete presentation solution.
Incorporating 4 DVI-I inputs, the DVP4 has the capability to accept any combination of
4 analog RGB computer sources up to 1600 x 1200 resolution, or 4 DVI digital visual
interface digital computer sources up to 1280 x 1024 resolution.
Multiple video formats can be processed through the 8 BNC inputs on the DVP4. Any
combination of composite NTSC/PAL or S-Video (Y/C) sources can be fed to the unit
simultaneously.
The sum of the inputs creates a 12 input x 4 video window seamless matrix switch for the
ultimate in professional video switching. Combined with seamless switching, the DVP4
also incorporates digital transition effects - fades, reveals, and pans can be applied to
video windows with software definable timing for each event. Each video window can be
scaled and positioned in a virtually unlimited configuration. Graphics can be incorporated
in the foreground or background in combination with the windows, and with built-in
alpha channel support, corporate icons and dynamic text can be placed over the video
windows in a translucent format.
A DVI-I output provides the option of running analog RGB or DVI digital video to the
display of your choice.The output can be scaled for analog RGB non-interlaced resolutions
from 800 x 600 to 1600 x 1200 as well as interlaced HDTV format 1080i.The DVI digital
visual interface output can be scaled from 800 x 600 to 1280 x 1024 and supports HDTV
1080i as well.
When used in either analog RGB or DVI mode, all output resolutions support 4:3 and 16:9
aspect ratios to best match the display device.
By adding a touch sensitive overlay to the output display, the DVP4 transforms into a
Crestron touchpanel. It is compatible with overlays such as the Smart Matisse™, Elo™,
3M™ and even accepts Microsoft™ Serial Mouse pointing devices for control.Touchpanel
graphics, video window layouts, and effects, are all programmed using Crestron’s VTPRO-e
Microsoft Windows-based graphics development software.
Crestron’s breakthrough 2-Series control engine with the hot new 257 MIPS, 32-bit
Motorola ColdFire® processor and TYPE II complact flash memory slot is at the core of the
DVP4.The control engine allows the DVP4 to be used as a stand-alone master control
system running control logic to support any of Crestron’s network devices in the same
format as all the 2-Series control systems.The DVP4 is also capable of running in slave
mode so that it can be used with an existing 2-Series control system in a similar fashion to
a standard Isys™ touchpanel.
Four included RS-232 control ports can be programmed to control external devices such
as plasma screens, video conferencing codecs, or used as Touch-the-PC ports to allow the
user to touch through the computer window displayed onscreen and control any
Windows-based PC.To round out the package, a 10/100 Ethernet port with built-in Web
Server provides the ultimate in e-Control help desk functions and high speed
communications.
The DVP4 combines the latest in video processing technology with incredible graphic and
control features to provide a powerful solution for any application where high resolution
video and graphics are required.
DVP4 continued on next page
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
153
P R E S E N TAT I O N S O L U T I O N S
P R E S E N TAT I O N S O LU T I O N S
DVP4 continued from previous page
Switcher: . . . . . . . . . . . . . . . . . . . . . . . . Seamless - 12 Inputs x 4 Windows to One display output
Inputs:
Digital sampling: . . . . . . . . . . . . . 24 bit, 8 bits per color.
General Input selection: . . . . . . . Up to 4 RGB computers and 4 S-Video (or 8 Composite) video, any
combination of up to 4 sources displayed simultaneously on the
output.
RGB Input: . . . . . . . . . . . . . . . . . . . . . . . 4 DVI-I/Analog connectors for RGB (RGBHV, RGBS and RGsB
supported)/LVDS Digital
Non-interlaced analog sources: 640 x 480 (60-85Hz),
800 x 600 (60-85Hz)
832 x 624 (60-85Hz),
848 x 480 (60-85Hz)
852 x 480 (60-85Hz),
1024 x 768 (60-85Hz)
1152 x 864 (60-85Hz),
1280 x 768 (60-85Hz)
1280 x 960 (60-85Hz),
1280 x 1024 (60-85Hz)
1360 x 765 (60-85Hz),
1365 x 768 (60-85Hz)
1365 x 1024 (60-85Hz),
1600 x 1200 (60-75Hz)
Interlaced analog sources: . . . . . 1080i (1920 x 1080) (30Hz)
Minimum/maximum levels: . . . .5V to 1.5V p-p with built-in DC restoration.
Impedance: . . . . . . . . . . . . . . . . . . 75 ohms
Input sync type: . . . . . . . . . . . . . . Autodetect RGBHV, RGBS, RGsB
Input level: . . . . . . . . . . . . . . . . . . 3.0V to 5.0V p-p
Input impedance: . . . . . . . . . . . . 1k ohms
Max input voltage: . . . . . . . . . . . 5.0V p-p
DVI digital sources:. . . . . . . . . . . . 640 x 480 (60-85Hz),
800 x 600 (60-85Hz)
832 x 624 (60-85Hz),
848 x 480 (60-85Hz)
852 x 480 (60-85Hz),
1024 x 768 (60-85Hz)
1152 x 864 (60-85Hz),
1280 x 768 (60-85Hz)
1280 x 960 (60Hz),
1280 x 1024 (60Hz)
Video input: . . . . . . . . . . . . . . . . . . . . . 8 BNC connectors shared for 8 NTSC/PAL Composite sources or 4
S-Video (Y/C) sources - mix and match any combination using the 8
BNC inputs.
Minimum/maximum levels: . . . .5V to 1.5V p-p with built-in DC restoration
Impedance: . . . . . . . . . . . . . . . . . . 75 ohms
TBC: . . . . . . . . . . . . . . . . . . . . . . . . Internal TBC with Genlock to any active external source (software
definable).
Outputs:
Color Depth: . . . . . . . . . . . . . . . . . 32-Bit/pixel 24-bit color + 8-bit alpha channel, 24-Bit Video/Graphics
Output interface: . . . . . . . . . . . . 1 DVI-I connector for output display of analog RGB /LVDS Digital Video
Supported Aspect Ratios with any output resolution listed below:
4:3, 16:9
Output resolutions: . . . . . . . . . . . Non-Interlaced analog RGB/DVI output:
800 x 600 (60-85Hz)
1024 x 768 (60-85Hz)
720p (1280 x720, 60Hz)
1280 x 1024 (60-85Hz)
1365 x 768 (60-85Hz)
1600 x 1200 (60Hz)
Interlaced analog
RGB/DVI output:. . . . . . . . . . . . . . 1080i HDTV (1920 x 1080
Output Sync:
Output type: . . . . . . . . . . . . . . . RGBHV, RGBS
Output level: . . . . . . . . . . . . . . . TTL, 5.0V p-p
Polarity: . . . . . . . . . . . . . . . . . . . Composite sync, negative
H/V: . . . . . . . . . . . . . . . . . . . . . . . User-selectable
Effects: . . . . . . . . . . . . . . . . . . . . . . All video windows support fades, reveals, and pans with user definable
timing. Text, buttons, and graphics can be overlaid on video/computer
windows.
Processor:
CPU: . . . . . . . . . . . . . . . . . . . . . . . . 32-bit Motorola 5407 ColdFire® Processor
Processing Speed: . . . . . . . . . . . . 257 MIPS (Dhrystone 2.1 benchmark)
Memory: . . . . . . . . . . . . . . . . . . . . . . . 4 MB FLASH for Program File, 32MB RAM, 32 MB Compact Flash Card
(Included) for Graphics/Webserver - Expandable up to 4GB (accessible
on rear panel - accepts standard Type II compact flash or IBM
Microdrive).
DVP4 continued on next page
154
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P R E S E N TAT I O N S O L U T I O N S
P R E S E N TAT I O N S O LU T I O N S
DVP4 continued from previous page
Communication: . . . . . . . . . . . . . . . . . 4 RS-232 ports (DB-9) for interfacing with PC Mouse Control,
Telestrator or AV devices
1 RS-232 port for Programming/Console
1 RS-232 port for external pointing device/
user interface.
User Interface: . . . . . . . . . . . . . . . . . . . Accepts a variety of pointing devices, including a Microsoft™compatible serial mouse, and touch-sensitive screen overlays from
other manufacturers like SMART Matisse™, 3M™ and Elo
TouchSystems™
Cresnet port: . . . . . . . . . . . . . . . . . . . . Operates in Master Mode to support Cresnet Peripherals when used as
a stand-alone control system.
Operates in slave mode when used with any
2-Series control system.
Ethernet: . . . . . . . . . . . . . . . . . . . . . . . . RJ45 for auto-sensing 10/100 BaseT Ethernet, dynamic/static IP, and full
duplex TCP/IP, UDP/IP, Built-In web server
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V from Cresnet, 50W power factor (requires external CNPWS-75 not
included).
Environmental:
Operating temperature: . . . . . . . 5 to 45°C
Humidity: . . . . . . . . . . . . . . . . . . . 10% to 90% RH (non-condensing)
Enclosure: . . . . . . . . . . . . . . . . . . . Black Metal
Dimensions (HxWxD) . . . . . . . . . . . . . 3.5” (8.9cm) x 19” (48.3cm) x 11.5” (29.1cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 lbs. (3.6 kg)
Included Connectors:. . . . . . . . . . . . . . DVI/VGA adapter kit Contains 5 adapters which convert DVI inputs to
15-pin VGA analog inputs.
INCLUDED ACCESSORIES
DVI/VGA ADAPTER KIT . . . . . Contains 5 adapters which convert DVI inputs to 15-pin VGA
analog inputs (Included)
155
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
P R E S E N TAT I O N S O L U T I O N S
P R E S E N TAT I O N S O LU T I O N S c o n t i n u e d
CNMK – PS/2 Keyboard and Mouse
Control Interface
The CNMK provides control of a PS/2 mouse and keyboard for Windows®-based PCs.
The CNMK can be used as part of any Cresnet control system.
Ports:
12VDC .5 A . . . . . . . . . . . . . . . . . . DC power socket connector is used to supply external power via the
supplied 500mA power pack
NET . . . . . . . . . . . . . . . . . . . . . . . . . Two 6-pin, 6-position RJ11 modular jacks are used to connect the CNMK
module to either the SmarTouch STS or CRESNET remote control system.Two
NET ports are available so that network units can be daisy-chained together.
TO MOUSE PORT . . . . . . . . . . . . . . . . PS/2 connector connects to the mouse port on the PC via the supplied cable.
MOUSE. . . . . . . . . . . . . . . . . . . . . . PS/2 connector connects to any PS/2-style mouse.
TO KEYBOARD PORT. . . . . . . . . . . PS/2 connector connects to the keyboard port on the PC via the
supplied cable.
KEYBOARD. . . . . . . . . . . . . . . . . . . PS/2 connector connects to any PS/2-style keyboard.
Indicators:
PWR (Power) . . . . . . . . . . . . . . . . . LED illuminates when 12 volts (from power pack) or 24 volts DC (from
network) is supplied to the CNMK.
NET . . . . . . . . . . . . . . . . . . . . . . . . . LED illuminates when communication between either the SmarTouch
STS or CRESNET remote control system and the CNMK is established.
Illumination indicates that the SIMPL program currently loaded has a
network device defined at the same ID as the CNMK.
Power Requirements . . . . . . . . . . . . . . 12 or 24VDC, load factor of 3.0W
Dimensions (HxWxD) . . . . . . . . . . . . . 1.70" (4.32cm) x 7.07" (17.95cm) x 6.32" (16.06cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.00lb (0.90Kg)
MODEL OPTIONS:
All the features of the CNMK, with the following exceptions:
CNMKI . . . . . . . . . . . . . . . . . . . . . . . International Version; 220V (Uses 1000mA power pack)
CNSC-1A – Slide Projector Interface
The CNSC-1A is a Cresnet slide projector interface. Functions include forward, reverse,
focus, and power. CNSC-1A has inputs for slide lift and tray zero sense.
Connectors:
INPUTS . . . . . . . . . . . . . . . . . . . . . . (1) 6-pin male connector; accepts (5) digital inputs
PROJ OUT. . . . . . . . . . . . . . . . . . . . Push button provides local slide power control
NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin male connector; connects to Cresnet control network
LED Indicators:
AC OUT. . . . . . . . . . . . . . . . . . . . . . Indicates slide projector AC outlet power status
NET PWR . . . . . . . . . . . . . . . . . . . . Indicates 24VAC power supplied from Cresnet control network
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 3W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Black metal
Dimensions (HxWxD) . . . . . . . . . . . . . 1.95" (4.95cm) x 7.81" (19.83cm) x 7.65" (19.42cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 2.05lbs (0.9Kg)
MODEL OPTIONS:
All the features of the CNSC-1A, with the following exceptions:
CNSCI-1A . . . . . . . . . . . . . . . . . . . . International Version
Power Cord . . . . . . . . . . . . . . . . . . International power cord connected to unit; (220VAC compatible)
156
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
AU T O M AT I O N C A B I N E T E N LO S U R E S A N D AC C E S S O R I E S
New for 2003
CAEN – Automation Cabinets
The CAEN Series is a complete line of multi-purpose Automation Cabinets that allow
mounting and wiring of Crestron lighting and control systems, as well as phone, cable
and security systems from other manufacturers’. The wide range of cabinet sizes, plus the
flexible mounting holes and knockouts, let the installer use space efficiently while
achieving effective heat dissipation and a clean, professional look. Also included are
helpful details like easy-to-use labels that clearly identify the electrical circuits, ensuring
confusion-free servicing and upgrades throughout the lifetime of the house.
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . 16 Gauge galvanized steel enclosure with perforated grey steel cover
MODELS:
CAEN-7X2 . . . . . . . . . . . . . . . . 7 modules high x 2 modules wide.
CAEN-7X1 . . . . . . . . . . . . . . . . 7 modules high x 1 module wide.
CAEN-4X2 . . . . . . . . . . . . . . . . 4 modules high x 2 modules wide.
CAEN-4X1 . . . . . . . . . . . . . . . . 4 modules high x 1 module wide.
CAEN-2X1 . . . . . . . . . . . . . . . . 2 modules high x 1 module wide.
New for 2003
CAEN-UMP – Automation Cabinet
Accessory Plates
The CAEN-UMP Series is a complete line of universal mounting plates which allow
mounting of any non-Crestron equipment to Crestron’s automation cabinets.
MODELS:
CAEN-UMP2X2 . . . . . . . . . . 2 columns of 2 modules, 15”H x 14”W
CAEN-UMP2X1 . . . . . . . . . . 1 column of 2 modules, 15”H x 7”W
CAEN-UMP1X2 . . . . . . . . . . 2 columns of 1 module, 7”H x 14”W
CAEN-UMP1X1 . . . . . . . . . . 1 module, 7”H x 7”W
New for 2003
CLX-4IND – 4 Channel, 4 Inductor
Noise Suppressor
The CLX-4 IND is a 4-channel, 4-inductor filament noise suppressor, designed to be
mounted in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Channels . . . . . . . . . . . . . . . . . . . . . . . . 4
Load per inductor . . . . . . . . . . . . . . . . 10A maximum (connect 2 in parallel for larger loads)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (6 total)
Inductor Input. . . . . . . . . . . . . . . . Red x 4
Inductor Output . . . . . . . . . . . . . . Red x 4
157
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
WA L L B OX D I M M E R S
New for 2003
CLW-1DIM – Wall Box Dimmer
The CLW-1DIM is a self-powered wall box dimmer, which includes an isolated 2-wire nonpolarized Cresnet port. Buttons may report to the control system and be used to control
other functions simultaneously, however the dimmer will also operate stand-alone when
Cresnet data is not available.
New for 2003
CLW-1SW – Wall Box Switch
The CLW-1SW is a self-powered wall box switch, which includes an isolated 2-wire nonpolarized Cresnet port. Buttons may report to the control system and be used to control
other functions simultaneously, however the switch will also operate stand-alone when
Cresnet data is not available.
New for 2003
CLW-DELV – Electronic Low Voltage Wall Box
The CLW-DELV is a self-powered electronic low voltage wall box switch, which includes an
isolated 2-wire non-polarized Cresnet port. Buttons may report to the control system and
be used to control other functions simultaneously, however the switch will also operate
stand-alone when Cresnet data is not available.
New for 2003
CLW-SLV – Slave Switch Wall Box
for Multiple Point Control
The CLW-SLV is a self-powered slave switch wall box for multiple point control, which
includes an isolated 2-wire non-polarized Cresnet port. Buttons may report to the control
system and be used to control other functions simultaneously, however the switch will
also operate stand-alone when Cresnet data is not available.
158
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
DIMMER MODULES
New for 2003
CLX-1DIM4 – 4 Controlled circuits,
1 Circuit Dimmer
The CLX-1DIM4 is a 4-channel, 1-20A circuit incandescent dimmer, designed to be
mounted in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz
Channels . . . . . . . . . . . . . . . . . . . . . . . . 4
Load per channel . . . . . . . . . . . . . . . . . 16A maximum
Load per module . . . . . . . . . . . . . . . . . 16A maximum
Types of Loads . . . . . . . . . . . . . . . . . . . Incandescent, Magnetic Low-Voltage, Neon/Cold-cathode, Fluorescent
(switch only)
Connector . . . . . . . . . . . . . . . . . . . . . . . (4) 5-position Cresnet connectors, plus override input (contact closure
to Cresnet ground activates override)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (6 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black
Neutral In. . . . . . . . . . . . . . . . . . . . White
Dim Out . . . . . . . . . . . . . . . . . . . . . Red x 4
LED Indicators:
State of each Circuit. . . . . . . . . . . 4 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select (PnP) . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-1DIM4 . . . . . . . . . . . . . . . . . . . Termination Block for CLX-1DIM4
New for 2003
CLX-1DIM8 – 8 Controlled circuits,
1 Circuit Dimmer
The CLX-1DIM8 is an 8-channel, 1-20A circuit incandescent dimmer, designed to be
mounted in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz
Channels . . . . . . . . . . . . . . . . . . . . . . . . 8
Load per channel . . . . . . . . . . . . . . . . . 16A maximum
Load per module . . . . . . . . . . . . . . . . . 16A maximum
Types of Loads . . . . . . . . . . . . . . . . . . . Incandescent, Magnetic Low-Voltage, Neon/Cold-cathode, Fluorescent
(switch only)
Connector . . . . . . . . . . . . . . . . . . . . . . . (4) 5-position Cresnet connectors, plus override input (contact closure
to Cresnet ground activates override)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (6 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black
Neutral In. . . . . . . . . . . . . . . . . . . . White
Dim Out . . . . . . . . . . . . . . . . . . . . . Red x 8
LED Indicators:
State of each Circuit. . . . . . . . . . . 8 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select (PnP) . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-1DIM8 . . . . . . . . . . . . . . . . . . . Termination Block for CLX-1DIM8
159
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
DIMMER MODULES continued
New for 2003
CLX-2DIM2 – 2 Controlled circuits,
1 Circuit Dimmer
The CLX-2DIM2 is a 2-channel, 2-20A circuit incandescent dimmer, designed to be
mounted in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz (2 input lines must be same phase or split phase)
Channels . . . . . . . . . . . . . . . . . . . . . . . . 2
Load per channel . . . . . . . . . . . . . . . . . 16 maximum
Load per module . . . . . . . . . . . . . . . . . 32A maximum
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (5 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black x 2
Neutral In. . . . . . . . . . . . . . . . . . . . White
Dim Out . . . . . . . . . . . . . . . . . . . . . Red x 2
LED Indicators:
State of each Circuit. . . . . . . . . . . 2 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select. . . . . . . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-2DIM2 . . . . . . . . . . . . . . . . . . . Termination Block for CLX-2DIM2
New for 2003
CLX-1DELV4 – 4 Channel, 1 Circuit Low Voltage
Dimmer for Electronic Fixtures
The CLX-1DELV4 is a 4-channel, 1-20A circuit low voltage dimmer for electronic fixtures,
designed to be mounted in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz
Channels . . . . . . . . . . . . . . . . . . . . . . . . 4
Load per channel . . . . . . . . . . . . . . . . . 9A maximum
Load per module . . . . . . . . . . . . . . . . . 16A maximum
Type of Loads . . . . . . . . . . . . . . . . . . . . Electronic low voltage
Connector . . . . . . . . . . . . . . . . . . . . . . . (4) 5-position Cresnet connectors, plus override input (contact closure
to Cresnet ground activates override)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (6 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black
Neutral In. . . . . . . . . . . . . . . . . . . . White
Dim Out . . . . . . . . . . . . . . . . . . . . . Red x 4
LED Indicators:
State of each Circuit. . . . . . . . . . . 4 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select (PnP) . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-1DELV4 . . . . . . . . . . . . . . . . . . Termination Block for CLX-1DELV4
160
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
DIMMER MODULES continued
New for 2003
CLX-1FLVC4 – 4 Controlled circuit, 1 Circuit Low
Voltage Fluorescent Dimmer with 0-10VDC Control
The CLX-1FLVC4 is a 4-channel, 1-20A circuit fluorescent dimmer with low voltage control,
designed to be mounted in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz
Channels . . . . . . . . . . . . . . . . . . . . . . . . 4
Load per channel . . . . . . . . . . . . . . . . . 16A maximum
Load per module . . . . . . . . . . . . . . . . . 16A maximum
Type of Loads . . . . . . . . . . . . . . . . . . . . Low Voltage DC controlled dimmable fluorescent
On/Off control . . . . . . . . . . . . . . . . . . . Relay
Connector . . . . . . . . . . . . . . . . . . . . . . . (4) 5-position Cresnet connectors, plus override input (contact closure
to Cresnet ground activates override)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (6 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black
Neutral In. . . . . . . . . . . . . . . . . . . . White
Switched Out . . . . . . . . . . . . . . . . Red x 4
Control+ . . . . . . . . . . . . . . . . . . . . Orange x 4
Control- . . . . . . . . . . . . . . . . . . . . . Gray x 4
LED Indicators:
State of each Circuit. . . . . . . . . . . 4 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select (PnP) . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-1FLVC4 . . . . . . . . . . . . . . . . . . Termination Block for CLX-1FLVC4
161
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
S W I T C H E S A N D M OT O R C O N T R O L L E R S
New for 2003
CLX-4HSW4 – 4 Controlled circuit, 4 Circuit
High-Inrush Switch
The CLX-4HSW4 is a 4-channel, 4-20A circuit high-inrush switch, designed to be mounted
in Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz
Circuit Feeds . . . . . . . . . . . . . . . . . . . . . 4
Channels . . . . . . . . . . . . . . . . . . . . . . . . 4
Load per channel . . . . . . . . . . . . . . . . . 16A maximum
Load per module . . . . . . . . . . . . . . . . . 64A maximum
Type of Loads . . . . . . . . . . . . . . . . . . . . Non-Dimming
Connector . . . . . . . . . . . . . . . . . . . . . . . (4) 5-position Cresnet connectors, plus override input (contact closure
to Cresnet ground activates override)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (9 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black x 4
Neutral In. . . . . . . . . . . . . . . . . . . . White
Switched Out . . . . . . . . . . . . . . . . Red x 4
LED Indicators:
State of each Circuit. . . . . . . . . . . 4 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select (PnP) . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-4HSW4 . . . . . . . . . . . . . . . . . . Termination Block for CLX-4HSW4
New for 2003
CLX-1IMC4 – 4 Controlled circuit,
1 Circuit Motor Control
The CLX-1IMC4 is a 4-channel, 1-20A circuit motor control, designed to be mounted in
Crestron’s CAEN Series of multi-purpose Automation Cabinets.
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC, 50/60Hz
Channels . . . . . . . . . . . . . . . . . . . . . . . . 4
Load per channel . . . . . . . . . . . . . . . . . 5A maximum (motor), 3A maximum
Load per module . . . . . . . . . . . . . . . . . 16A maximum
Type of Loads . . . . . . . . . . . . . . . . . . . . Bi-directional motors
Relays. . . . . . . . . . . . . . . . . . . . . . . . . . . 8 (2 per motor for direction control)
Connector . . . . . . . . . . . . . . . . . . . . . . . (4) 5-position Cresnet connectors, plus override input (contact closure
to Cresnet ground activates override)
Pigtail Wires: . . . . . . . . . . . . . . . . . . . . . 14 AWG UL type 1015, CSA TEW-105AC (10 total)
Line In . . . . . . . . . . . . . . . . . . . . . . Black
Neutral In. . . . . . . . . . . . . . . . . . . . White
Motor Open. . . . . . . . . . . . . . . . . . Red x 4
Motor Close. . . . . . . . . . . . . . . . . . Blue x 4
LED Indicators:
State of each Circuit. . . . . . . . . . . 4 Red LEDs
Module Power . . . . . . . . . . . . . . . Green LED
Cresnet ID . . . . . . . . . . . . . . . . . . . Yellow LED
Module Select (PnP) . . . . . . . . . . Red LED
NECESSARY ACCESSORY
CLT-1IMC4 . . . . . . . . . . . . . . . . . . . Termination Block for CLX-1IMC4
162
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
COMMER CIAL LIGHTING
CLC-6 – Lighting Enclosure with 6 Module Spaces
The CLC-6 enclosure provides (6) module spaces to house Crestron network lighting
dimmers, relays and related accessories.
Construction . . . . . . . . . . . . . . . . . . . . . (14) gauge steel chassis and cover, light grey baked enamel
Installation . . . . . . . . . . . . . . . . . . . . . . Wall mounted
AC Feed . . . . . . . . . . . . . . . . . . . . . . . . . Accepts externally protected AC branch circuits
Conduit Knockouts . . . . . . . . . . . . . . . Pre-punched 3/4" knockouts on four sides, may be enlarged
Module Space. . . . . . . . . . . . . . . . . . . . Houses (6) modules, modules install with
(4) 10-32 x 3/8" (.95 cm) screws
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . Free-air convection cooled from 0 to 40 degrees C ambient
Dimensions (HxWxD) . . . . . . . . . . . . . 18.25" (46.36 cm) x 32" (81.28 cm) x 6.4" (16.26 cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 18lbs (8.16Kg) /14lbs (6.35Kg) empty
CLCI-8 – Cresnet Power Switching Module
The CLCI-8 is a power control interface with (8) single-pole, single throw relays, each rated
up to 20A, for lighting, motor control, etc.; 125/277VAC. Each relay is normally open.
Control of each relay is programmed with SIMPL™ Windows®. It is designed for mounting
in one module space of a CLC-6 enclosure.
Connectors:
RELAY . . . . . . . . . . . . . . . . . . . . . . . (8) isolated relays for power control
LOCAL INPUTS. . . . . . . . . . . . . . . . (1) 9-pin terminal block, included; for attaching (8) local inputs
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin terminal block, included; connects to Cresnet control network
LED Indicators:
NET POWER. . . . . . . . . . . . . . . . . . Indicates 24VDC network power supplied to unit
ID SELECT. . . . . . . . . . . . . . . . . . . . Indicates communication with Cresnet system
Switches . . . . . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set identity code
Relay Closure Rating . . . . . . . . . . . . . . 20A, @277VAC, [email protected]
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 8.0W
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Occupies one module space in CLC enclosure
Mounting . . . . . . . . . . . . . . . . . . . . . . . Surface mount
Dimensions (HxWxD) . . . . . . . . . . . . . 15.00" (38.10 cm) x 8.00" (20.32 cm) x 2.50" (6.35 cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2lbs (3.3Kg)
163
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
COMMER CIAL LIGHTING continued
CLI-D120N – Dual Channel Dimmer Module
The CLI-D120N is a dual channel network lighting dimmer module for control of
incandescent, low voltage, neon, cold cathode and non-dim lighting loads. Local control
input ports provide eight programmable Cresnet inputs for system control from external
switch closures. It is designed for mounting in one module space of a CLC-6 enclosure.
Connectors:
AC Power and Lighting Loads . . Screw type terminal blocks, 10AWG maximum
Local Control Input . . . . . . . . . . . (1) 9-position screw type terminal block, 16AWG maximum for
attaching 8 local low voltage inputs
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin terminal block, included; connects to the
Cresnet control network
Switches:
ID Select. . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set network ID code
Dim/Non-dim . . . . . . . . . . . . . . . . 2-position jumper selects dim/non-dim operation
Override. . . . . . . . . . . . . . . . . . . . . Slide switch selects normal dimmer operation or switches
output to full on
Dimmer Load Capacity . . . . . . . . . . . . Dimmer rated for control of two independent 120V, 15A or 20A lighting
circuits
Load control . . . . . . . . . . . . . . . . . . . . . 40A SCR per channel
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . Not less than 400 microseconds from 10 to 90% of output waveform
AC Power. . . . . . . . . . . . . . . . . . . . . . . . Dimmer fed with two externally protected 120V circuits (both circuits
in same AC phase), no breakers in the enclosure
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Occupies one module space in CLC enclosure
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . Free-air convection cooled from 0 to 40 degrees C ambient
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 12lbs (5.44Kg)
Options . . . . . . . . . . . . . . . . . . . . . . . . . 220VAC or 277VAC
164
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
COMMER CIAL LIGHTING continued
CLI-120N-4A – Four Channel Dimmer Module
The CLI-120N-4A is a (4) channel network lighting dimmer module for control of lower
wattage incandescent, low voltage, neon, cold cathode and non-dim lighting loads. Local
control port provides (8) programmable Cresnet inputs for system control from external
switch closures. It is designed for mounting in one module space of a CLC-6 enclosure.
Connectors:
AC Power and Lighting Loads . . Screw type terminal blocks, 10AWG maximum
Local Control Input . . . . . . . . . . . (1) nine-position screw type terminal block, 16AWG max.
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-pin terminal block, included; connects to the
Cresnet control network
Switches:
ID Select. . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set network ID code
Dim/Non-dim . . . . . . . . . . . . . . . . (2) position jumper selects dim/non-dim operation of each channel
Override. . . . . . . . . . . . . . . . . . . . . Slide switch selects normal dimmer operation or switches
all channels to full on
Dimmer Load Capacity . . . . . . . . . . . . Each channel rated for up to 1000W with total load of all
(4) channels not to exceed 1920W for the module
AC Power . . . . . . . . . . . . . . . . . . . . . . . . Dimmer fed with a single 20A circuit (externally protected when
installed in CLC enclosure)
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Occupies one module space in CLC enclosure
Construction . . . . . . . . . . . . . . . . . . . . . (14) gauge steel chassis and cover, light gray baked enamel
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . Free-air convection cooled from 0 to 40 degrees C ambient
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 9lbs (4.08Kg)
MODEL OPTIONS:
All the features of the CLI-120N-4A, with the following exceptions:
CLI-220N-4A . . . . . . . . . . . . . . . . . International Version
Power Requirements . . . . . . . . . . 220V; 1600W per channel and 3400W total on all channels
CLI-120N-4:
Enclosure (HxWxD) . . . . . . . . . . . Single module enclosure plus dimming module
12.5" (31.75cm) x 6.0" (15.24cm) x 4.75" (12.07cm);
pre-punched knockouts on top and bottom
Weight . . . . . . . . . . . . . . . . . . . . . . 11lbs (4.99Kg)
CLI-220N-4 . . . . . . . . . . . . . . . . . . . International Version
Power Requirements . . . . . . . . . . 220V, 1600W per channel and 3400W total on all channels
Enclosure (HxWxD) . . . . . . . . . . . Single module enclosure; 12.5" (31.75cm) x 6.0" (15.24cm) x 4.75"
(12.07cm); pre-punched knockouts on top and bottom
165
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
L I G H T I N G CO N T RO L P RO D U C TS
COMMER CIAL LIGHTING continued
CNLFDB-4 – Fluorescent Dimmer
The CNLFDB-4 is a (4) channel fluorescent dimmer module for control of lighting fixtures
equipped with HiLume™ or ECO-10 fluorescent dimming ballasts. It is designed for
mounting in two module spaces of a CLC-6 enclosure.
Connectors:
AC Power and Lighting Load . . . Screw type terminal block, 10AWG max
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-position terminal block, included; connects to CNLCOMP lighting
computer or Cresnet control network
Dimmer Output . . . . . . . . . . . . . . (1) LED per channel indicates the relative intensity of the dimmer
LED Indicators:
NET POWER. . . . . . . . . . . . . . . . . . Indicates 24VDC network power supply to unit
ID SELECT. . . . . . . . . . . . . . . . . . . . Indicates communication to the Cresnet control system
DIMMER OUTPUT . . . . . . . . . . . . . LED illuminates when channel is on
Switches:
ID Select. . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set module identity code
Override. . . . . . . . . . . . . . . . . . . . . Slide switch selects normal dimmer operation or switches
all channels to full on
Channel Load Capacity . . . . . . . . . . . . Each channel rated for control of 15A or 20A lighting circuits, module
may be configured for 120 or 277V operation
Relay Closure Rating . . . . . . . . . . . . . . 20A at 277VAC; 1HP at 125VAC
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 4 watts
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Requires 2 module spaces in CLC-6 or one module space in
CSTC enclosure
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5lbs (1.59Kg)
CNLDAB-4A – Four Channel Fluorescent Dimmer
The CNLDAB-4A is a (4) channel dimmer module for control of fluorescent fixtures
equipped with Advance Mk VII dimming ballasts. It is designed for mounting in two
module spaces of a CLC-6 enclosure.
Connectors:
AC Power . . . . . . . . . . . . . . . . . . . . Screw type terminal block, 10AWG max.
Dimming Control . . . . . . . . . . . . . Screw type low voltage terminal block; 16AWG max.
NET . . . . . . . . . . . . . . . . . . . . . . . . . (1) 4-position terminal block, included; connects to the
Cresnet control network
LED Indicators:
NET POWER. . . . . . . . . . . . . . . . . . Indicates 24VDC network power supply to unit
DIMMER OUTPUT . . . . . . . . . . . . . LED illuminates when channel is on
Switches . . . . . . . . . . . . . . . . . . . . . . . . (2) rotary ID switches to set module identity code
Channel Load Capacity . . . . . . . . . . . . Each channel rated for control of 15 or 20A lighting circuits,
module is compatible with 120 or 277VAC operation
Relay Closure Rating . . . . . . . . . . . . . . 20A at 277VAC; 1HP at 125V
Power:
Requirements . . . . . . . . . . . . . . . . 24VDC network power
Cresnet Power Factor. . . . . . . . . . 4 watts
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . Requires 2 module spaces in CLC-6 or one module space in
CSTC enclosure
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5lbs (1.59Kg)
166
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON-CERTIFIED WIRE and CABLE
CRESTRON CERTIFIED WIRE AND CABLE
New for 2003
CRESNET – Cresnet Control Cable
Cresnet is the basic control cable used to connect components over the Crestron Control
Network. Applications include home automation and control systems. Like all Crestroncertified wire and cable, it is designed for quality, performance and compatibility with
Crestron products and systems. For dealer convenience, all Crestron wire may be
purchased directly from Crestron-certified distributors.
Construction . . . . . . . . . . . . . . . . . . . . . 18/2C + 22/1P Shielded Lowcap
Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . Flame Retardant PVC
Thickness. . . . . . . . . . . . . . . . . . . . . . . . Nominal .032
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . Teal with co-extruded Yellow stripe
Overall Diameter . . . . . . . . . . . . . . . . . Nominal .250
New for 2003
CRESCAT – CAT5E plus Cresnet Control Cable
CresCAT is the basic Cresnet control cable combined with a single CAT5E cable.
Applications include balanced audio or video, home automation and control systems.
Like all Crestron-certified wire and cable, it is designed for quality, performance and
compatibility with Crestron products and systems. For dealer convenience, all Crestron
wire may be purchased directly from Crestron-certified distributors.
Construction . . . . . . . . . . . . . . . . . . . . . 18/2C + 22/1P Shielded Lowcap Cresnet + CAT5E
Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . Flame Retardant PVC
Thickness. . . . . . . . . . . . . . . . . . . . . . . . Nominal .035
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . Teal with co-extruded Red stripe
Overall Diameter . . . . . . . . . . . . . . . . . Nominal .530
New for 2003
CRESCAT-D – 2 CAT5E plus Cresnet Control Cable
CresCAT-D is the basic Cresnet control cable combined with two CAT5E cables, for use with
Isys™ TPS-6000,TPS-5000 and TPS-2000L touchpanels. Applications include balanced
audio or video, home automation and control systems. Like all Crestron-certified wire and
cable, it is designed for quality, performance and compatibility with Crestron products
and systems. For dealer convenience, all Crestron wire may be purchased directly from
Crestron-certified distributors.
Construction . . . . . . . . . . . . . . . . . . . . . 18/2C + 22/1P Shielded Lowcap Cresnet + 2x CAT5E
Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . Flame Retardant PVC
Thickness. . . . . . . . . . . . . . . . . . . . . . . . Nominal .035
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . Teal with co-extruded Black stripe
Overall Diameter . . . . . . . . . . . . . . . . . Nominal .560
167
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON-CERTIFIED WIRE and CABLE
CRESTRON CERTIFIED WIRE AND CABLE continued
New for 2003
CRESCAT-Q – 4 CAT5E plus Cresnet Control Cable
CresCAT-Q is the basic Cresnet control cable combined with four CAT5E cables, for use
with fully implemented media distribution systems. Applications include bi-directional
balanced audio and videohome automation and control systems, Ethernet data network.
Like all Crestron-certified wire and cable, it is designed for quality, performance and
compatibility with Crestron products and systems. For dealer convenience, all Crestron
wire may be purchased directly from Crestron-certified distributors.
Construction . . . . . . . . . . . . . . . . . . . . . 18/2C + 22/1P Shielded Lowcap Cresnet + 4x CAT5E
Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . Flame Retardant PVC
Thickness. . . . . . . . . . . . . . . . . . . . . . . . Nominal .035
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . Teal with co-extruded White stripe
Overall Diameter . . . . . . . . . . . . . . . . . Nominal .680
New for 2003
CRESCAT-DC – 2 CAT5E plus 2 RG6 Quad Shield
plus Cresnet Control Cable
CresCAT-DC is the basic Cresnet control cable combined with two CAT5E and two RG6
Quad Shield cables. Applications include balanced audio and video, composite or S-Video
over coax, Broadband dual-DSS distribution, and home automation and control. Like all
Crestron-certified wire and cable, it is designed for quality, performance and compatibility
with Crestron products and systems. For dealer convenience, all Crestron wire may be
purchased directly from Crestron-certified distributors.
Construction . . . . . . . . . . . . . . . . . . . . . 18/2C + 22/1P Shielded Lowcap Cresnet + 2x CAT5E + 2x RG6 Quad
Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . Flame Retardant PVC
Thickness. . . . . . . . . . . . . . . . . . . . . . . . Nominal .045
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . Teal with co-extruded Orange stripe
Overall Diameter . . . . . . . . . . . . . . . . . Nominal .800
168
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
C R E S T R O N L I M I T E D WARRANTY
CRESTRON ELECTRONICS, Inc. warrants its products to
This warranty shall be the sole and exclusive remedy
be free from manufacturing defects in materials and
to the original purchaser. In no event shall CRESTRON
workmanship under normal use for a period of three
be liable for incidental or consequential damages of
(3) years from the date of purchase from CRESTRON,
any kind (property or economic damages inclusive)
with the following exceptions: disk drives and any
arising from the sale or use of this equipment.
other moving or rotating mechanical parts, pan/tilt
CRESTRON is not liable for any claim made by a third
heads and power supplies are covered for a period of
party or made by the purchaser for a third party.
one (1) year;
touchscreen display and overlay
CRESTRON shall, at its option, repair or replace any
components are covered for 90 days; batteries and
product found defective, without charge for parts or
incandescent lamps are not covered.
labor. Repaired or replaced equipment and parts
This warranty extends to products purchased directly
supplied under this warranty shall be covered only by
from CRESTRON or an authorized CRESTRON dealer.
the unexpired portion of the warranty.
Purchasers should inquire of the dealer regarding the
Except as expressly set forth in this warranty,
nature and extent of the dealer’s warranty, if any.
CRESTRON makes no other warranties, expressed or
CRESTRON shall not be liable to honor the terms of
implied, nor authorizes any other party to offer any
this warranty if the product has been used in any
warranty, including any implied warranties of
application other than that for which it was intended,
merchantability or fitness for a particular purpose. Any
or if it has been subjected to misuse, accidental
implied warranties that may be imposed by law are
damage, modification, or improper installation
limited to the terms of this limited warranty. This
procedures. Furthermore, this warranty does not
warranty
cover any product that has had the serial number
warranties.
statement
supercedes
all
previous
altered, defaced, or removed.
169
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
INDEX PAGE 1 OF 3
AV2 . . . . . . . . . . . . . . . . . . . . . . . . . . .76
B-G1-FP . . . . . . . . . . . . . . . . . . . . . . .59
B-G1-FPA . . . . . . . . . . . . . . . . . . . . . .59
B-G1-FPB . . . . . . . . . . . . . . . . . . . . . .59
B-G1-FPW . . . . . . . . . . . . . . . . . . . . .59
B-G1-FP-BLC/CHRM . . . . . . . . . . . .59
B-G1-FP-BR/GLD . . . . . . . . . . . . . . .59
B-G1-FP-P/BLK . . . . . . . . . . . . . . . .59
B-G1-FP-P/BRASS . . . . . . . . . . . . . .59
B-G1-FP-P/GLD . . . . . . . . . . . . . . .59
B-G1-FP-PRIMED . . . . . . . . . . . . . . .59
B-G1-FP-S/STEEL . . . . . . . . . . . . . . .59
B-G2-FP . . . . . . . . . . . . . . . . . . . . . . .59
B-G2-FPA . . . . . . . . . . . . . . . . . . . . . .59
B-G2-FPB . . . . . . . . . . . . . . . . . . . . . .59
B-G2-FPW . . . . . . . . . . . . . . . . . . . . .59
B-G2-FP-BLC/CHRM . . . . . . . . . . . .59
B-G2-FP-BR/GOLD . . . . . . . . . . . . .59
B-G2-FP-P/BLK . . . . . . . . . . . . . . . .59
B-G2-FP-P/BRASS . . . . . . . . . . . . . .59
B-G2-FP-P/GLD . . . . . . . . . . . . . . . .59
B-G2-FP-PRIMED . . . . . . . . . . . . . . .59
B-G2-FP-S/STEEL . . . . . . . . . . . . . . .59
B-G3-FP . . . . . . . . . . . . . . . . . . . . . . .60
B-G3-FPA . . . . . . . . . . . . . . . . . . . . . .60
B-G3-FPB . . . . . . . . . . . . . . . . . . . . . .60
B-G3-FPW . . . . . . . . . . . . . . . . . . . . .60
B-G3-FP-BLC/CHRM . . . . . . . . . . . .60
B-G3-FP-BR/GOLD . . . . . . . . . . . . .60
B-G3-FP-P/BLK . . . . . . . . . . . . . . . .60
B-G3-FP-P/BRASS . . . . . . . . . . . . . .60
B-G3-FP-P/GLD . . . . . . . . . . . . . . . .60
B-G3-FP-PRIMED . . . . . . . . . . . . . . .60
B-G3-FP-S/STEEL . . . . . . . . . . . . . . .60
BB-1000 . . . . . . . . . . . . . . . . . . . . . . .44
BB-1550CW . . . . . . . . . . . . . . . . . . .52
BB-1600 . . . . . . . . . . . . . . . . . . . . . . .46
BB-2000L . . . . . . . . . . . . . . . . . . . . .40
BB-3000 . . . . . . . . . . . . . . . . . . . . . . .40
BB-5000 . . . . . . . . . . . . . . . . . . . . . . .39
BB-6000 . . . . . . . . . . . . . . . . . . . . . . .39
C2-AUDIO-6PAKA . . . . . . . . . . . . .132
C2-AUDIO-6PAKB . . . . . . . . . . . . .132
C2-AUDIO-6PAKW . . . . . . . . . . . .132
C2-AUDIO-PAK . . . . . . . . . . . . . . .131
C2COM-3 . . . . . . . . . . . . . . . . . . . . .87
C2ENET-1 . . . . . . . . . . . . . . . . . . . . .86
C2ENET-2 . . . . . . . . . . . . . . . . . . . . .86
C2I-AUDIO-6PAKA . . . . . . . . . . . .132
C2I-AUDIO-6PAKB . . . . . . . . . . . .132
C2I-AUDIO-6PAKW . . . . . . . . . . .132
C2I-AUDIO-PAK . . . . . . . . . . . . . . .131
C2IR-8 . . . . . . . . . . . . . . . . . . . . . . . .87
CAEN-2x1 . . . . . . . . . . . . . . . . . . . .157
CAEN-4x1 . . . . . . . . . . . . . . . . . . . .157
CAEN-4x2 . . . . . . . . . . . . . . . . . . . .157
CAEN-7x1 . . . . . . . . . . . . . . . . . . . .157
CAEN-7x2 . . . . . . . . . . . . . . . . . . . .157
CAEN-UMP1x1 . . . . . . . . . . . . . . .157
CAEN-UMP1x2 . . . . . . . . . . . . . . .157
CAEN-UMP2x1 . . . . . . . . . . . . . . .157
CAEN-UMP2x2 . . . . . . . . . . . . . . .157
CAGE2 . . . . . . . . . . . . . . . . . . . . . . . .92
CEN-CN . . . . . . . . . . . . . . . . . . . . . .142
CEN-IO . . . . . . . . . . . . . . . . . . . . . .139
CEN-COM . . . . . . . . . . . . . . . . . . . .140
CEN-TVAV . . . . . . . . . . . . . . . .85, 141
CENI-CN . . . . . . . . . . . . . . . . . . . . .142
CENI-COM . . . . . . . . . . . . . . . . . . .140
CENI-IO . . . . . . . . . . . . . . . . . . . . . .139
CENI-TVAV . . . . . . . . . . . . . . . .85, 141
CLC-6 . . . . . . . . . . . . . . . . . . . . . . . .163
CLCI-8 . . . . . . . . . . . . . . . . . . . . . . .163
CLI-120N-4 . . . . . . . . . . . . . . . . . .165
CLI-120N-4A . . . . . . . . . . . . . . . . .165
CLI-220N-4 . . . . . . . . . . . . . . . . . .165
CLI-220N-4A . . . . . . . . . . . . . . . . .165
CLI-D120N . . . . . . . . . . . . . . . . . . .164
CLT-1DELV4 . . . . . . . . . . . . . . . . . .160
CLT-1DIM4 . . . . . . . . . . . . . . . . . . .159
CLT-1DIM8 . . . . . . . . . . . . . . . . . . .159
CLT-2DIM2 . . . . . . . . . . . . . . . . . . .160
CLT-1FLVC4 . . . . . . . . . . . . . . . . . .161
CLT-1IMC4 . . . . . . . . . . . . . . . . . . .162
CLT-4HSW4 . . . . . . . . . . . . . . . . . .162
CLW-1DIM . . . . . . . . . . . . . . . .61, 158
CLW-1SW . . . . . . . . . . . . . . . . .61, 158
CLW-DELV . . . . . . . . . . . . . . . .61, 158
CLW-SLV . . . . . . . . . . . . . . . . . .61, 158
CLX-1DELV4 . . . . . . . . . . . . . . . . . .160
170
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CLX-1DIM4 . . . . . . . . . . . . . . . . . . .159
CLX-1DIM8 . . . . . . . . . . . . . . . . . . .159
CLX-2DIM2 . . . . . . . . . . . . . . . . . . .160
CLX-1FLVC4 . . . . . . . . . . . . . . . . . .161
CLX-1IMC4 . . . . . . . . . . . . . . . . . . .162
CLX-4HSW4 . . . . . . . . . . . . . . . . . .162
CLX-4IND . . . . . . . . . . . . . . . . . . . .157
CNAMPX-12x60 . . . . . . . . . . . . . .119
CNAMPX-16x60 . . . . . . . . . . . . . .118
CNAMPX-2x60 . . . . . . . . . . . . . . .121
CNAMPX-7x200 . . . . . . . . . . . . . .122
CNAMPXI-12x60 . . . . . . . . . . . . . .120
CNAMPXI-16x60 . . . . . . . . . . . . . .119
CNAMPXI-2x60 . . . . . . . . . . . . . . .122
CNAMPXI-7x200 . . . . . . . . . . . . . .123
CNANT . . . . . . . . . . . . . . . . . . . .51, 96
CNCS . . . . . . . . . . . . . . . . . . . . . . . . .92
CNECI-4A . . . . . . . . . . . . . . . . . . . .148
CNHBLOCK . . . . . . . . . . . . . . . . . . . .94
CNIRGW . . . . . . . . . . . . . . . . . . . . . .70
CNIRHT-15 . . . . . . . . . . . . . . . . . . . .68
CNIRHT-30 . . . . . . . . . . . . . . . . . . . .68
CNIRT-32B . . . . . . . . . . . . . . . . . . . .67
CNIRT-48B . . . . . . . . . . . . . . . . . . . .67
CNI-TVAV . . . . . . . . . . . . . . . . . . . .147
CNLDAB-4A . . . . . . . . . . . . . . . . . .166
CNLFDB-4 . . . . . . . . . . . . . . . . . . . .166
CNMK . . . . . . . . . . . . . . . . . . . . . . .156
CNMKI . . . . . . . . . . . . . . . . . . . . . . .156
CNPC-1A . . . . . . . . . . . . . . . . . . . . .148
CNPCI-1A . . . . . . . . . . . . . . . . . . . .148
CNPCI-8 . . . . . . . . . . . . . . . . . . . . .149
CNPI-16B . . . . . . . . . . . . . . . . . . . . . .66
CNPI-48I . . . . . . . . . . . . . . . . . . . . . .66
CNPI-48L . . . . . . . . . . . . . . . . . . . . . .66
CNPWS-75 . . . . . . . . . . . . . . . . . . . .97
CNPWSI-75 . . . . . . . . . . . . . . . . . . . .97
CNRACKX . . . . . . . . . . . . . . . . . . . . .84
CNRFGWA . . . . . . . . . . . . . . . . .50, 70
CNRFHT-15A . . . . . . . . . . . . . . . . . .68
CNRFHT-30A . . . . . . . . . . . . . . . . . .68
CNRFT-32A . . . . . . . . . . . . . . . . . . . .67
CNRFT-48A . . . . . . . . . . . . . . . . . . . .67
CNRJ11 . . . . . . . . . . . . . . . . . . . . . . .94
CNSC-1A . . . . . . . . . . . . . . . . . . . . .156
CRESTRON ELECTRONICS
INDEX PAGE 2 OF 3
CNSCI-1A . . . . . . . . . . . . . . . . . . . .156
CNSP-110 . . . . . . . . . . . . . . . . . . . . .96
CNSP-112 . . . . . . . . . . . . . . . . . . . . .96
CNSP-BAO . . . . . . . . . . . . . . . . . . . .97
CNSP-XX . . . . . . . . . . . . . . . . . . . . . .97
CNTS-N . . . . . . . . . . . . . . . . . . . . . .147
CNTBLOCK . . . . . . . . . . . . . . . . . . . .95
CN-TVAV . . . . . . . . . . . . . . . . . . . . .147
CNWM . . . . . . . . . . . . . . . . . . . . . . . .69
CNWM-10A . . . . . . . . . . . . . . . . . . .62
CNWM-29A . . . . . . . . . . . . . . . . . . .62
CNWMBG-10A . . . . . . . . . . . . . . . . .63
CNWMBG2-34A . . . . . . . . . . . . . . .63
CNWML . . . . . . . . . . . . . . . . . . . . . . .69
CNWM-LT9 . . . . . . . . . . . . . . . . . . . .62
CNWM-LT9-BTW . . . . . . . . . . . . . . .62
CNWM-LU12 . . . . . . . . . . . . . . . . . .62
CNWM-LU12-FPW . . . . . . . . . . . . .62
CNWP-32 . . . . . . . . . . . . . . . . . . . . .65
CNWP-32B . . . . . . . . . . . . . . . . . . . .65
CNWP-64 . . . . . . . . . . . . . . . . . . . . .65
CNWPBG2-32 . . . . . . . . . . . . . . . . .65
CNWPBG2-32B . . . . . . . . . . . . . . . .65
CNWPBG2-64 . . . . . . . . . . . . . . . . .65
CNX-ASBK . . . . . . . . . . . . . . . . . . .128
CNX-B12A . . . . . . . . . . . . . . . . . . . . .54
CNX-B12B . . . . . . . . . . . . . . . . . . . . .54
CNX-B12W . . . . . . . . . . . . . . . . . . . .54
CNX-B2A . . . . . . . . . . . . . . . . . . . . . .58
CNX-B2B . . . . . . . . . . . . . . . . . . . . . .58
CNX-B2W . . . . . . . . . . . . . . . . . . . . .58
CNX-B4A . . . . . . . . . . . . . . . . . . . . . .57
CNX-B4B . . . . . . . . . . . . . . . . . . . . . .57
CNX-B4W . . . . . . . . . . . . . . . . . . . . .57
CNX-B6A . . . . . . . . . . . . . . . . . . . . . .56
CNX-B6B . . . . . . . . . . . . . . . . . . . . . .56
CNX-B6W . . . . . . . . . . . . . . . . . . . . .56
CNX-B8A . . . . . . . . . . . . . . . . . . . . . .55
CNX-B8B . . . . . . . . . . . . . . . . . . . . . .55
CNX-B8W . . . . . . . . . . . . . . . . . . . . .55
CNX-BF12A . . . . . . . . . . . . . . . . . . .64
CNX-BF12B . . . . . . . . . . . . . . . . . . . .64
CNX-BF12W . . . . . . . . . . . . . . . . . . .64
CNX-BIPAD8 . . . . . . . . . . . . . . . . .125
CNX-BN12A . . . . . . . . . . . . . . . . . . .64
CNX-BN12B . . . . . . . . . . . . . . . . . . .64
CNX-BN12W . . . . . . . . . . . . . . . . . .64
CNX-DAP8 . . . . . . . . . . . . . . . . . . .126
CNX-DAP8RC . . . . . . . . . . . . . . . .126
CNX-DVP4 . . . . . . . . . . . . .27, 71, 153
CNX-EGWY . . . . . . . . . . . . . . . . . . .145
CNX-NPA8 . . . . . . . . . . . . . . . . . . . .99
CNX-PAD8A . . . . . . . . . . . . . . . . . .124
CNX-PBAR4 . . . . . . . . . . . . . . . . . .127
CNX-PBVR4 . . . . . . . . . . . . . . . . . .135
CNX-PVID8x3 . . . . . . . . . . . . . . . .133
CNX-PVID8x4 . . . . . . . . . . . . . . . .134
CNX-RMIRD . . . . . . . . . . . . . . . . . .138
CNX-SPWS300 . . . . . . . . . . . . . . .100
CNXAO-8 . . . . . . . . . . . . . . . . . . . . .88
CNXBRMO . . . . . . . . . . . . . . . . . . .128
CNXCAGE . . . . . . . . . . . . . . . . . . . . .92
CNXCOM-2 . . . . . . . . . . . . . . . . . . . .88
CNXCPU . . . . . . . . . . . . . . . . . . . . . .91
CNXENET+ . . . . . . . . . . . . . . . . . . . .87
CNXFZ . . . . . . . . . . . . . . . . . . . . . . .152
CNXHUB . . . . . . . . . . . . . . . . . . . . . .93
CNXIO-16 . . . . . . . . . . . . . . . . . . . . .88
CNXIR-8 . . . . . . . . . . . . . . . . . . . . . . .88
CNXIRP . . . . . . . . . . . . . . . . . . . . . . .96
CNXLIR . . . . . . . . . . . . . . . . . . . . . . .93
CNXLIRI . . . . . . . . . . . . . . . . . . . . . . .93
CNXMIDI . . . . . . . . . . . . . . . . . . . . . .89
CNXRMAK . . . . . . . . . . . . . . . . . . . . .94
CNXRMC . . . . . . . . . . . . . . . . . . . . .136
CNXRMCLV . . . . . . . . . . . . . . . . . .137
CNXRMCS . . . . . . . . . . . . . . . . . . . .138
CNXRY-16 . . . . . . . . . . . . . . . . . . . . .89
CNXRY-8 . . . . . . . . . . . . . . . . . . . . . .89
CNXTA . . . . . . . . . . . . . . . . . . . . . . . .90
CNXVTC-3 . . . . . . . . . . . . . . . . . . . . .90
CP2 . . . . . . . . . . . . . . . . . . . . . . . . . . .80
CP2E . . . . . . . . . . . . . . . . . . . . . . . . . .81
CPC-2000A . . . . . . . . . . . . . . . . . . .152
CPC-CAMI . . . . . . . . . . . . . . . . . . . .150
CPC-CMT . . . . . . . . . . . . . . . . . . . .151
CPC-LMT . . . . . . . . . . . . . . . . . . . . .151
CPC-TMT . . . . . . . . . . . . . . . . . . . . .151
CPC-WMT . . . . . . . . . . . . . . . . . . . .151
CPU2 . . . . . . . . . . . . . . . . . . . . . . . . .91
Cresnet . . . . . . . . . . . . . . . . . . . . . .167
CresCAT . . . . . . . . . . . . . . . . . . . . .167
CresCAT-D . . . . . . . . . . . . . . . . . . .167
CresCAT-Q . . . . . . . . . . . . . . . . . . .168
CresCAT-DC . . . . . . . . . . . . . . . . . .168
CT/LC-FP . . . . . . . . . . . . . . . . . . . . . .44
CT/LC-FPA . . . . . . . . . . . . . . . . . . . . .44
CT/LC-FPA-NB . . . . . . . . . . . . . . . . .44
CT/LC-FPB . . . . . . . . . . . . . . . . . . . . .44
CT/LC-FPB-NB . . . . . . . . . . . . . . . . .44
CT/LC-FP-BLK/CHRM . . . . . . . . . . .44
CT/LC-FP-BR/GLD . . . . . . . . . . . . . .44
CT/LC-FPINA . . . . . . . . . . . . . . . . . .44
CT/LC-FPINB . . . . . . . . . . . . . . . . . .44
CT/LC-FPINW . . . . . . . . . . . . . . . . . .44
CT/LC-FP-P/BLK . . . . . . . . . . . . . . . .44
CT/LC-FP-P/BRASS . . . . . . . . . . . . .44
CT/LC-FP-P/GLD . . . . . . . . . . . . . . .44
CT/LC-FP-S/STEEL . . . . . . . . . . . . . .44
CT/LC-FPW . . . . . . . . . . . . . . . . . . . .44
CT/LC-FPW-NB . . . . . . . . . . . . . . . .44
CT/LC-WPK . . . . . . . . . . . . . . . . . . . .44
CT-1000 . . . . . . . . . . . . . . . . . . . . . . .43
CT-1600 . . . . . . . . . . . . . . . . . . . . .45
CT-1600L/W-DB . . . . . . . . . . . . . . .45
CT-1600L/W-DW . . . . . . . . . . . . . . .45
DA-1550CW . . . . . . . . . . . . . . . . . . .52
e-Control . . . . . . . . . . . . . . . . . . . .143
e-Control 2 . . . . . . . . . . . . . . . . . . .144
HBK-3000 . . . . . . . . . . . . . . . . . . . . .24
HBK-6000 . . . . . . . . . . . . . . .17, 20, 22
IRP2 . . . . . . . . . . . . . . . . . . . . . . . . . .95
LC-1000 . . . . . . . . . . . . . . . . . . . . . . .43
MMK2000L . . . . . . . . . . . . . . . . . . . .40
MMS . . . . . . . . . . . . . . . . . . . . . . . .103
MMS-SC . . . . . . . . . . . . . . . . . . . . .103
MP2 . . . . . . . . . . . . . . . . . . . . . . . . .101
MP2E . . . . . . . . . . . . . . . . . . . . . . . .102
MT-500C . . . . . . . . . . . . . . . . . . . . . .49
PAC2 . . . . . . . . . . . . . . . . . . . . . . . . . .82
PMK-2000L . . . . . . . . . . . . . . . . . . . .40
PRO2 . . . . . . . . . . . . . . . . . . . . . . . . .74
171
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
INDEX PAGE 3 OF 3
PW-1205 . . . . . . . . . . . . . . . . . . . . . .98
PW-1205R . . . . . . . . . . . . . . . . . . . . .98
PW-1210 . . . . . . . . . . . . . . . . . . . . . .98
PW-1215 . . . . . . . . . . . . . . . . . . . . . .98
PW-2410RU . . . . . . . . . . . . . . . . . . .99
PW-2420RU . . . . . . . . . . . . . . . . . . .99
PWI-1205R . . . . . . . . . . . . . . . . . . . .98
PWI-1210 . . . . . . . . . . . . . . . . . . . . .98
PWI-1215 . . . . . . . . . . . . . . . . . . . . .98
RACK2 . . . . . . . . . . . . . . . . . . . . . . . .78
RMK-AMPX2x60 . . . . . . . . . . . . . .123
RMK-1600 . . . . . . . . . . . . . . . . . . . . .46
RMK-5000 . . . . . . . . . . . . . . . . . . . . .41
RMK-6000 . . . . . . . . . . . . . . . . . . . . .41
RMK-TPS3000L . . . . . . . . . . . . . . . .41
SMK-3000 . . . . . . . . . . . . . . . . . . . . .24
SMK-6000 . . . . . . . . . . . . . .17, 20, 22
ST-112 . . . . . . . . . . . . . . . . . . . . . . .116
ST-1550C . . . . . . . . . . . . . . . . . . . . .48
ST-1700C . . . . . . . . . . . . . . . . . . . . .47
ST-AV2PAK-C . . . . . . . . . . . . . . . . .117
ST-BC . . . . . . . . . . . . . . . . . . . . . . . . .52
ST-BP . . . . . . . . . . . . . . . . . . . . . . . . .53
ST-BTP . . . . . . . . . . . . . . . . . . .53, 113
ST-CNB . . . . . . . . . . . . . . . . . . . . . .113
ST-COM . . . . . . . . . . . . . . . . . . . . . .110
ST-CP . . . . . . . . . . . . . . . . . . . . . . . .105
ST-CP2PAK-C . . . . . . . . . . . . . . . . .117
STCP-501 . . . . . . . . . . . . . . . . . . . .116
ST-CS . . . . . . . . . . . . . . . . . . . . . . . .106
ST-DS . . . . . . . . . . . . . . . . . . . .51, 113
ST-IO . . . . . . . . . . . . . . . . . . . . . . . .107
ST-LT . . . . . . . . . . . . . . . . . . . . . . . .109
ST-MB . . . . . . . . . . . . . . . . . . . . . . .114
ST-PC . . . . . . . . . . . . . . . . . . . . . . . .112
ST-PK . . . . . . . . . . . . . . . . . . . . . . . .115
ST-RMK . . . . . . . . . . . . . . . . . . . . . .115
ST-SPL . . . . . . . . . . . . . . . . . . . . . . .115
ST-TUNE . . . . . . . . . . . . . . . . . . . . .129
ST-VC . . . . . . . . . . . . . . . . . . . . . . . .108
ST-VS . . . . . . . . . . . . . . . . . . . . . . . .111
ST-XX . . . . . . . . . . . . . . . . . . . . . . . .116
STI-1550C . . . . . . . . . . . . . . . . . . . . .48
STI-1700C . . . . . . . . . . . . . . . . . . . . .47
STI-AV2PAK-C . . . . . . . . . . . . . . . .117
STI-BC . . . . . . . . . . . . . . . . . . . . . . . .52
STI-COM . . . . . . . . . . . . . . . . . . . . .110
STI-CP . . . . . . . . . . . . . . . . . . . . . . .105
STI-CP2PAK-C . . . . . . . . . . . . . . . .117
STI-CS . . . . . . . . . . . . . . . . . . . . . . .106
STI-DS . . . . . . . . . . . . . . . . . . . .51, 113
STI-IO . . . . . . . . . . . . . . . . . . . . . . . .107
STI-LT . . . . . . . . . . . . . . . . . . . . . . . .109
STI-MB . . . . . . . . . . . . . . . . . . . . . . .114
STI-PC . . . . . . . . . . . . . . . . . . . . . . .112
STIRP . . . . . . . . . . . . . . . . . . . . . . . .114
STI-VS . . . . . . . . . . . . . . . . . . . . . . .111
STRFGWX . . . . . . . . . . . . . . . . . . . . .50
STRFGWXI . . . . . . . . . . . . . . . . . . . . .50
STS-C . . . . . . . . . . . . . . . . . . . . . . . .104
STSI-C . . . . . . . . . . . . . . . . . . . . . . .104
STX-1700C . . . . . . . . . . . . . . . . . . . .47
STX-AV2PAK-C . . . . . . . . . . . . . . .117
STXI-1700C . . . . . . . . . . . . . . . . . . .47
STXI-AV2PAK-C . . . . . . . . . . . . . . .117
SW-COMPAK . . . . . . . . . . . . . . . . .146
SW-RESPAK . . . . . . . . . . . . . . . . . .146
SW-DBM . . . . . . . . . . . . . . . . . . . . .145
SW-SCHEDULE . . . . . . . . . . . . . . .145
TMK2000L . . . . . . . . . . . . . . . . . . . .40
TPS-2000L . . . . . . . . . . . . . . . . . . . .26
TPS-3000 . . . . . . . . . . . . . . . . . . . . . .24
TPS-3000L . . . . . . . . . . . . . . . . . . . .25
TPS-4500 . . . . . . . . . . . . . . . . . . . . . .22
TPS-4500IMC . . . . . . . . . . . . . . . . . .33
TPS-4500IMW . . . . . . . . . . . . . . . . .33
TPS-4500L . . . . . . . . . . . . . . . . . . . .23
TPS-5000 . . . . . . . . . . . . . . . . . . . . . .19
TPS-5000L . . . . . . . . . . . . . . . . . . . .21
TPS-6000 . . . . . . . . . . . . . . . . . . . . . .16
TPS-6000L . . . . . . . . . . . . . . . . . . . .18
TPSBLOCK-10 . . . . . . . . . . . . . . . . .39
TPS-CBL-3, 6, 9 . . . . . . . . . . . . . . . . .42
TPS-CBL-S3, S6, S9 . . . . . . . . . . . . .42
TPS-CBL-T3, T6, T9 . . . . . . . . . . . . .42
TPS-ENET . . . . . . . . . . . . . . . . . . . . .34
TPS-ENETL . . . . . . . . . . . . . . . . . . . .34
TPS-FP . . . . . . . . . . . . . . . . . . . . . . . .31
TPS-IMC . . . . . . . . . . . . . . . . . . . . . . .32
172
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
TPS-IMC-BV . . . . . . . . . . . . . . . . . . .32
TPS-IMW . . . . . . . . . . . . . . . . . . . . . .33
TPS-MEM16MB . . . . . . . . . . . . . . . .34
TPS-MEM32MB . . . . . . . . . . . . . . . .34
TPS-RFGWX . . . . . . . . . . . . . . . . . . .37
TPS-TPI . . . . . . . . . . . . . . . . . . . . . . .30
TPS-VID . . . . . . . . . . . . . . . . . . . . . . .35
TPS-VID-2 . . . . . . . . . . . . . . . . . . . . .35
TPS-VIDL . . . . . . . . . . . . . . . . . . . . . .35
TPS-WPK . . . . . . . . . . . . . . . . . . . . . .31
TPS-XBC . . . . . . . . . . . . . . . . . . . . . .38
TPS-XBTP . . . . . . . . . . . . . . . . . . . . .37
TPS-XDS . . . . . . . . . . . . . . . . . . . . . .36
TPS-XTXRF . . . . . . . . . . . . . . . . . . . .36
TPS-XVGA . . . . . . . . . . . . . . . . . . . . .38
TPS-XVGA-BV . . . . . . . . . . . . . . . . .38
TPS-XVGAL . . . . . . . . . . . . . . . . . . . .39
WMKM-2000L . . . . . . . . . . . . . . . . .41
WMKT-2000L . . . . . . . . . . . . . . . . . .41
CRESTRON ELECTRONICS
NOTES
173
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
NOTES
174
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
NOTES
175
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
CRESTRON ELECTRONICS
NOTES
176
Crestron Elec tronics, Inc.
©2002 Specifications subject to change without notice.
800.237.2041 201.767.3400
www.crestron.com
www.crestron.com
800.237.2041
+201.767.3400
©2002 Crestron Electronics, Inc. All brand names and trademarks are the exclusive proper ty of their respective owners. Specifications subject to change without notice. Doc. # 6038 Aug. 02
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement