Magic Chef MCWBC77DZC Owner's manual

Magic Chef MCWBC77DZC Owner's manual
 BUILT-IN WINE & BEVERAGE COOLER
WITH DUAL TEMPERATURE ZONES
INSTRUCTION MANUAL
Model No.: MCWBC77DZC
To ensure proper use of this appliance and your safety, please read the
following instructions completely before operating this appliance.
TABLE OF CONTENTS
NAMES OF THE PARTS..
SPECIFICATIONS..........
IMPORTANT SAFETY INSTRUCTIONS...
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE... annee
FREE STANDING INSTALLATION RE
BUILT-IN INSTALLATION 0er.
ELECTRICAL CON
NECTION LL Lea eee eee a ananas aan
APPLIANCE FEATURE... co,
OPERATING YOUR APPLIANCE
TEMPERATURE CONTROL AND DISPLAY eee e caen een
INDICATOR LIGHT
STAND BY ..........
LOCK AND UNLOCK oe
TEMPERATURE SETTING erkenne e a aan ea eee
INTERIOR LIGHT .
AUTOMATIC DEFROST L anar a eee ae ea aa ee ae eee eee ae ea
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE... eee
VACATION TIME...
MOVING YOUR APPLIANCE... eee e eee
ENERGY SAVING TIPS... reine
TROUBLESHOOTING GUIDE... erre
APPLIANCE WARRANTY
EN
NAMES OF THE PARTS
MODEL NO.: MCWBC77DZC
1) Interior Light
2) DC Electric Fan
3) Inner rear
4) Zone Partition
5) Control / Display Panel
6) Wire Shelf / Glass Shelf
*(Shelves are available for either wine
or beverage combination storage use)
7) Door Handle
8) Partition Gasket
9) Tempered Glass Door
SPECIFICATIONS — Model 4+ MCWBC77DZC
Product Description
Built-In Wine 8 Beverage Cooler
With Dual Temperature Zones
Model No. MCWBC77DZC
Unit Dimensions Width Height Depth
(inches )
23.4 34.4” 24.4”
Net Weight (lbs) 114165
EN
IMPORTANT SAFETY INSTRUCTIONS
X WARNING Y To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
Read all instructions before using the wine or beverage cooler.
DANGER or WARNING: Risk of child entrapment.
To avoid the possibility of child entrapment, please take the following precautions
before throwing out the appliance.
- Remove all doors from the unit.
- Leave the shelves in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Refrigerants: All refrigeration products contain refrigerants, which under the
guidelines of federal law must be removed before disposal of product. It is the
consumer’s responsibility to comply with federal and local regulations when
disposing of this product.
Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or an explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 4
hours. This will reduce the possibility of a malfunction in the cooling system from improper
handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 7)
Free-Standing Installation
This appliance is designed to be installed built-in or free standing.
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Ambient temperature below 68°F (20°C) or above 90°F (32°C) will hinder the
performance of this appliance. This unit is not designed for use in a garage or any other
outside installation.
Avoid locating the appliance in moist areas.
Plug the appliance into dedicated, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized service center. This unit is not designed to be installed in an RV or used with an
inverter.
After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 3
~ 4 hours before placing wine bottles or beverage cans in the appliance.
Built-In Installation
The cutout dimension illustrated in figure (A) allows for Pr
door swing and access to the pull-out shelves when
installed as a built-in appliance. If installing between | |
Locate Outlet
E ©
frameless cabinets, a 7%” wide filler strip or side panel cl mar.
may be needed on hinge side. The filler strip will act e A
a о расе! between the appliance case and adjacent | | жен TAFMin, сене
cabinet door swing. The width of the opening must Y
include the filter panels.
Note:
The door should protrude at least 1” beyond the
surrounding cabinets.
24m SA |
Including Sandle Si,
Figure A
The cutout depth must be 24”.
Electrical Connection
N WARNING Y
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the
possibility of electrical shock.
Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied.
This appliance requires a standard 115 Volt A.C. /60Hz electrical outlet with three-prong ground.
This appliance is not designed to be used with an inverter.
The cord should be secured behind the appliance and not left exposed or dangling to prevent
accidental injury.
Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out
from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance. Use of an extension cord can
negatively affect the performance of the unit.
If any problems with the appliance persist, please contact our Customer Service Dept. to consult with
a representative at 888 775-0202 or visit our website to request warranty service at
www.mcappliance.com.
APPLIANCE FEATURE
Two Temperature Zones
e There are two zones in this appliance divided by a partition.
e Each zone has its independent temperature control and display.
e Each of the two zones can be used to store wine bottles or beverages.
e The upper zone can hold up to 16 bottles or 63 cans.
e The lower zone can hold up to 28 bottles or 77 cans.
e Besides wine shelves made of steel wire, two glass shelves are supplied for your convenience to
store beverages. Please keep the shelves that are temporarily not in use in good condition for
future use.
Interior Light
e Each zone has its own interior light, which can be switched on or off by pressing the pad ““ (light)
on the control panel. Long-life and high efficiency LEDs are installed for durability and energy
saving.
Upper Zone
e There are two wine shelves of full depth in the upper zone. Each shelf can holds up to 8 bottles
with the bottle necks alternating front to back.
e The second supporting guide in the upper zone (counted from top, see illustration “A” on this
page) is not designed for wine shelves. It is for beverage shelves only.
Lower Zone
e There are also two wine shelves of full depth in the lower zone. Each shelf can holds up to 8
bottles with the bottle necks alternating front to back.
e The bottom rack in the lower zone, which consists of two stories, each holds up to 6 bottles with
bottle necks facing the front (see illustration below on this page).
Engaged Wine Shelves
e All the wine shelves and glass shelves of full depth have tabs to engage the cabinet on both
sides.
e Any of the shelves can be removed to accommodate larger bottles.
To Remove a Shelf:
e Remove all bottles from the shelves.
e Lift the shelve upwards and then gently pull out the shelves.
To Replace a Shelf:
e Place the sides of the shelves back onto the supporting guides of the cabinet and push back until
the shelf tabs slide into place.
NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles.
1.
2. You can manually set your unit to the mode of “stand by” by pressing and holding both pads “=
OPERATING YOUR APPLIANCE
Temperature Control and Display
The temperatures in upper zone and lower zone can be independently controlled and displayed.
The temperature in either zone can be controlled between 39°F to 61°F (4 C to 16 C). (The zone
temperature may have a tolerance of +/-5°F (+/-3 C) from setting depending on different loading
and ambient conditions.)
3. The temperature display, indicator €¥, control pads &#
left side) are for upper zone of the wine cooler. _
0) —
& (colder) near the symbol
light) are for both zones.
Indicators Lights
@ When it lights, the indicato
@ When it lights, the indicator (£
which can be used to uniock.
@ When it lights, the indicator &
indicates the unit is in the mode of “stand by”.
indicates all control pads are locked except the pad
lock),
indicates the corresponding zone is in refrigeration cycle. The
indicator &# will go off when the set temperature is met.
Standby
Whenever the unit is switched on, all the display and indicators will light for 3 seconds with a beep
sound. Then the unit will automatically resume its previous setting when it was switched off. If the
unit was previously in “stand by” mode when switched off, it will resume the mode of “stand by”
and the indicator will light.
(warmer) and % (colder) for the lower zone for approximately 3 seconds, provided the pads are
unlocked and no any other setting operation is in process (Display does not flash). The indicator
will light to confirm this setting.
Lock and Unlock
If no pad is pressed within 1 minute then all control pads will be automatically locked except the
pad “ (lock), which can be used to unlock. You can also manually lock them by pressing the
pad % (lock) before they are automatically locked.
Under locked condition, no pad pressing will function but the indicator
to remind you that the pad being pressed is locked.
A pad functions only when it is unlocked. To unlock, press and hold the pad
seconds until the indicator | goes off.
will flash for 5 seconds
Temperature setting
e In normal condition, the temperature display indicates instant temperature of the
corresponding zone. During the setting operation, the temperature display flashes to remind
that temperature setting is in process.
in both upper zone and lower zone can be set separately by pressing pads
colder) respectively corresponding to that zone. The temperature of both
zones can be set anywhere between 39°F to 61°F (4 TC to 16°C).
es When the pad & (warmer) or & (colder) is pressed, the temperature displayed will increase
or decrease in an increment of one degree. If the pad (warmer) or % (colder) is pressed
and held for 2 seconds, the temperature displayed will increase or decrease in a speed of one
degree per half second.
e During the setting operation, the temperature displayed flashes until no pad is pressed within
approximately 3 seconds. Then your last setting is recorded and confirmed by that the display
stops flashing but to indicate instant temperature of that zone.
(warmer) or
6 EN
Note:
The temperature display can be changed between Celsius and Fahrenheit by pressing and
holding both pads %' (warmer) and (colder) for the upper zone for approximately 3
seconds, provided the pads are unlocked and no any other setting operation is in process
(Display does not flash).
Interior Light
You can press the pad light) to switch the interior light on/off, provided the pads are unlocked
and no any other setting operation is in process (Display does not flash).
AUTOMATIC DEFROST
There is no need for manual defrosting of this appliance due to automatic defrosting function.
e The ice build-up on the inner back wall during compressor operation will be automatically
defrosted in a compressor off cycle.
e When defrosting is in process, the indicators &
for both zones will run.
e Defrost water will drain out passing through the drain outlet in the inner back wall into a drain pan
located above the compressor, from where it evaporates.
CARE AND MAINTENANCE
Cleaning Your Appliance
e Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
e Turn off the appliance first and then unplug the unit from the wall outlet.
e Remove all contents.
e Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to a quart of water.
e Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
e The outside of the appliance should be cleaned with mild detergent and warm water.
e Dry the interior and exterior with a soft cloth.
e Dust or anything else blocking the vent may hinder the cooling efficiency of the appliance.
Vacuum the vent if necessary.
—
for both zones will go off, and the circulation fans
Vacation Time
e Turn off the appliance first and then unplug the unit from the wall outlet.
e Remove ali the contents.
e Clean the appliance.
e Leave the door open slightly to avoid possible formation of condensation, mold, or odors.
e Short vacations: Leave the appliance operating during vacations of less than three weeks.
e Long vacations: If the appliance will not be used for several months, remove all content and
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if necessary.
Moving Your Appliance
e Turn off the appliance first and then unplug the unit from the wall outlet.
e Remove ali the contents.
e Securely tape down all loose items inside your appliance.
e Tape the doors shut.
Energy Saving Tips
e The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
e Ensure that door is closed when the appliance is turned on.
TROUBLESHOOTING GUIDE
You can solve many common appliance problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling for
service.
PROBLEM
POSSIBLE CAUSE
Appliance does not operate.
Not plugged in.
The circuit breaker tripped or a blown fuse.
Temperature inside the appliance is too warm.
Temperature control is set too warm. Turn the
control to a cooler setting and allow several hours
for the temperature to stabilize.
Door is kept open too long or is opened too
frequently. Warm air enters the appliance every
time the door is opened. Open the door less
often.
The door is not closed completely.
The door gasket does not seal properly.
The appliance has recently been disconnected
for a period of time. 4 hours are required for the
appliance to cool down completely.
Temperature inside the appliance is too cold.
Temperature control is set too cold. Turn the
control to a warmer setting and allow several
hours for the temperature to stabilize.
Vibrations.
Check to assure that the appliance is on a level
surface.
The appliance is touching the wall. Re-level the
appliance and move it from the wall.
If continued vibration occurs, turn off the
appliance and unplug the power plug. Contact
Customer Service Dept. for further assistance.
Moisture forms on inside appliance walls.
Door is slightly open.
Door is kept open too long, or is opened too
frequently. Open the door less often.
The door is not sealed properly.
Moisture forms on outside of appliance.
Door is slightly open, causing cold air from inside
the appliance to meet warm moist air from
outside.
The door will not close properly.
The appliance is not on a level surface.
The gasket is dirty.
Abnormal display on control panel
“El” on display for upper zone — error of
temperature sensor for upper zone.
“E2” on display for lower zone -— error of
temperature sensor for lower zone.
“E3” on display for upper zone — error of DC
electric fan for upper zone.
“E4” on display for lower zone — error of DC
electric fan for lower zone.
If any of above errors happens, please contact
Customer Service Dept. for further assistance.
Do not attempt to repair it yourself.
EN
SO RIGHT AT HOME.”
Appliance Warranty
MC Appliance Corporation warrants each new appliance to be free from defects in material
and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the
company’s option) for any part(s) of the unit that has failed during the warranty period. Parts
and labor expenses are covered on this unit for a period of one year after the date of
purchase. In addition, MC Appliance Corp. warrants the compressor (parts only) to be free
from defects in material and workmanship for a period of 5 years. The consumer is
responsible for all labor and transportation expenses related to the diagnosis and
replacement of the compressor after the initial one-year warranty expires. If in the event that
the unit is determined to be non-repairable under the terms of this warranty, the consumer is
responsible for all transportation expenses to return the unit to our factory prior to receiving a
refund. A copy of the dated sales receipt / invoice is required to receive warranty
service or a refund.
This warranty covers appliances in use within the continental United States, Puerto
Rico and Hawaii. The warranty does not cover the following:
» Damages due to shipping damage or improper installation.
" Damages due to misuse or abuse.
= Content losses due to failure of the unit.
Inside components such as door panels, door shelves, racks, light bulbs, etc.
Punctures to the evaporator system due to improper defrosting of the unit.
Repairs performed by unauthorized service agents.
Service calls that do not involve defects in material and workmanship such as
Instruction on proper use of the product, door reversal or improper installation.
* Replacement or resetting of house fuses or circuit breakers.
=" Failure of this product if used for other than for its intended purpose.
"= Disposal costs for any failed unit not returned to our factory.
=" Any delivery costs incurred as the result of a unit that fails to perform as specified.
This warranty is in lieu of all warranties expressed or implied and no representative or
person is authorized to assume for us any other liability in connection with the sale of
this product. Under no circumstances is the consumer permitted to return this unit to
the factory without prior written consent from MC Appliance Corporation.
Model Parts Labor Compressor Type of Service
(part only)
MCWBC77DZC One-Year One-Year Five-Y ear In-Home
For Service or Assistance please call 888 775- 0202. Or visit us on the web at
www.mcappliance.com to request warranty service.
9 EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement