18in Upward Right Angle SATA Cable with LP4 Adapter

18in Upward Right Angle SATA Cable with LP4 Adapter
This 18in 'upward' right angle SATA cable features an upward right-angled (90°) combination SATA data and
power connector, that breaks out into one LP4 power (male) connector and one SATA female data connector allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as
well as to the motherboard SATA controller.
The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow and
flexible, giving you more room and better airflow inside your case. The keyed contacts of the Serial ATA
connector prevent broken or bent pins and allow a firmly seated connection with minimal pressure.
Designed and constructed to provide a dependable and convenient SATA connection, the right angled Serial
ATA Data Cable is backed by's Lifetime Warranty.
ATA Drive Arrays
Compatible with all Serial ATA Hard Drives
For use in servers and storage subsystems
Mini tower computers
Designed to meet/exceed SATA standards
Molded 90° connector
Supports data transfers of up to 6 Gbps
Compliant with Serial ATA III Specifications
1 800 265 1844
Technical Specifications
Cable Jacket Type
Connector A
Connector A
Connector B
Type and Rate
Connector Style
Cable Length
Shipping (Package) Weight
Included in Package
PVC - Polyvinyl Chloride
1 - LP4 (4 pin; Molex Large Drive Power) Male
1 - SATA (7 pin; Data) Receptacle
1 - SATA Data & Power Combo (7+15 pin) Receptacle
SATA III (6 Gbps)
Right Angled
18 in [457.2 mm]
0.1 lb [0 kg]
1 - Right upward angled SATA Cable with LP4 adapter
Certifications, Reports and Compatibility
1 800 265 1844