How To Project From Your Desktop Or Surface Pro 3 Using The

How To Project From Your Desktop Or Surface Pro 3 Using The
How To Project From Your Desktop Or Surface Pro 3
Using The Actiontec Wireless Projection
From The Surface Pro 3:
HOW TO CONNECT TO THE ACTIONTEC SCREENBEAM THE FIRST TIME:
1. Turn on projector and make sure you see the SCREENBEAM PRO – READY TO CONNECT screen.
2. Swipe in from the right side of the screen and tap/click on DEVICES.
3. In the DEVICES menu, tap/click on PROJECT.
4. In the PROJECT menu, select ADD A WIRELESS DISPLAY. Windows will now search for available
devices.
5. A PC AND DEVICES window will appear with a box in the middle that will display nearby devices.
Once it is done searching, and your device is listed (will be by building and room number, Ex: MS
110), tap/click on the device to start the connection process. You will then be prompted for an
8-digit PIN that you will have to enter ONLY the first time you connect to the Actiontec device.
The PIN will be emailed to you on request.
6. Once you have entered the PIN, click NEXT and the device will connect to your projector. If it
does not connect, contact the Tech team via SchoolDude.
HOW TO DISCONNECT FROM THE ACTIONTEC SCREENBEAM
1. Swipe in from the right side of the screen and tap/click on DEVICES.
2. In the DEVICES menu, tap/click on PROJECT.
3. Tap/click on the DISCONNECT option.
HOW TO RECONNECT TO A PREVIOUSLY CONNECTED ACTIONTEC SCREENBEAM.
1. Turn on projector and make sure you see the SCREENBEAM PRO – READY TO CONNECT
screen.
2. Swipe in from the right side of the screen and tap/click on DEVICES.
3. Tap/Click on PROJECT.
4. Tap/click on the Actiontec Screenbeam device that corresponds to the building and room
you are in. This will initiate the connection process, during which your screen might flash a
few times.
From A Laptop or Desktop
HOW TO CONNECT TO THE ACTIONTEC SCREENBEAM THE FIRST TIME:
1. Turn on projector and make sure you see the SCREENBEAM PRO – READY TO CONNECT
screen.
2. In the SYSTEM TRAY (up arrow in the bottom right corner, next to the clock), LEFT CLICK on
the ACTIONTEC SCREENBEAM icon.
3. In the ACTIONTEC SCREENBEAM WIRELESS DISPLAY window, you will see all available
connections.
4. Click on the ADD A RECIEVER link.
5. Once the scan is complete, click on the Actiontec ScreenBeam device that corresponds to
the room you are in and click on the CONNECT button.
6. On the next window, enter the 8-digit PIN and click the NEXT button. Each PIN is room
specific and will be emailed to you upon request. If you entered the PIN incorrectly, you will
get an INCORRECT PIN, PLEASE RETRY error message.
7. Once you have entered the PIN, click NEXT and the device will connect to your projector. If
it does not connect, contact the Tech team via SchoolDude.
HOW TO DISCONNECT FROM THE ACTIONTEC SCREENBEAM
1. In the SYSTEM TRAY (up arrow in the bottom right corner, next to the clock), LEFT CLICK on
the ACTIONTEC SCREENBEAM icon.
2. In the ACTIONTEC SCREENBEAM WIRELESS DISPLAY window, you will see all available
connections.
3. HIGHLIGHT the connection you want to disconnect from and tap/click the DISCONNECT
button.
4. When prompted to disconnect, tap/click the OK button. Your screen will flash a few times
during the disconnect process.
HOW TO RECONNECT TO A PREVIOUSLY CONNECTED ACTIONTEC SCREENBEAM.
1. Turn on projector and make sure you see the SCREENBEAM PRO – READY TO CONNECT
screen.
2. In the SYSTEM TRAY (up arrow in the bottom right corner, next to the clock), LEFT CLICK on
the ACTIONTEC SCREENBEAM icon.
3. In the ACTIONTEC SCREENBEAM WIRELESS DISPLAY window, you will see all available
connections.
4. HIGHLIGHT the connection of the room you are currently in and click the CONNECT button.
The connection process will take a few minutes, during which your screen might flash a few
times.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising