User Guide - Sirus Telecom

User Guide - Sirus Telecom
User Guide
LDP-9030D Digital Telephone
Tel: 0333 222 1133
Fax: 0333 222 1134
Email: [email protected]
Web: www.sirus-telecom.co.uk
Sirus Ld, Kes House, Winchester Road, Chandlers Ford, Hampshire, SO53 2FZ
LDP-9030D Digital Telephone Description
Quick Guide
Fixed Feature button definition
Button
Description
3 Soft
Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.
Page
Used to change more additional functions on the LCD display .
Trans/PGM
This button is used to initiate a call transfer (TRS) or to enter programming
mode (PGM).
Speed
Used to access speed dialing, speed programming, save number redial, and
last number redial.
DND
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is
active, the red LED in this button is illuminated.
Call Back
A station can initiate a call back request to a busy station. Once that station
becomes idle, the initiating station is signaled.
Mute
Toggle outgoing audio; red LED illuminates.
Volume
The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.
Speaker
Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.
Hold/Save
This button is used to put a call on hold or save information when programming.
Flexible
Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.
Visual Ringing LED
Illuminates when the phone is ringing.
LCD Display
Displays information about telephone status, dialing directories,and test
message information.
Hands-free Microphone
Microphone is used for hands-free speakerphone function.
LDP Keyset User Operation
Receiving calls _ Answering a Call While Idle :
1. Lift the handset and press the flashing Flex button (as
needed), the call will be connected.
Responding to a Call While Busy
1. Press [Hold/Save] and/or
2. Press the flashing CO line button.
Answering Calls to Other Stations
To answer a call ringing at another station:
1. Lift the handset,
2. Dial 7 (Directed Call Pick-Up code),
3. Dial the Intercom Number of the ringing station; the
call will be connected.
To answer a call ringing at a station in your
group:
1. Lift the handset,
2. Dial * * (Group Call Pick-Up code), the call is
connected.
Using Do-Not-Disturb (DND) to Block Incoming
Calls
To toggle DND ON and OFF:
1. Press the [DND] button.
Forwarding calls to another Station or Voice
Mail
To activate Call Forward from your phone to
another phone or internal system resource:
1.
2.
3.
4.
Lift the handset,
Press the [Fwd] Soft button,
Dial the type of forward code 1-4
Dial the destination number.
Placing Intercom calls
To place an Intercom call:
1. Lift the handset,
To enter a Station Speed Dial number with CO
Line and Name:
1.
2.
3.
4.
5.
6.
7.
Press [Trans/PGM],
Press [Speed],
Dial the desired Station Speed Dial bin number,
Select/dial the CO line/group,
Dial the desired number to be stored,
Press [Hold/Save],
Enter the associated name if desired, using the
alpha-numeric entry chart,
8. Press [Hold/Save].
To assign a Station Speed Dial number directly
to a Flex button:
1. Press [Trans/PGM],
2. Press the desired [Flexible] button,
3. Dial the desired number including CO Line/Group
access code
4. Press [Hold/Save],
5. Enter the associated name if desired, using the
Character Entry chart,
6. Press [Hold/Save].
ACNR: To retry a busy external number until
answered
To set up an ACNR, while on an outgoing call:
1. Use the Navigation button to display the next menu
and select the [ACNR] Soft button,
2. Hang-up handset.
To cancel the ACNR request:
1. Press the [ACNR] Soft button.
Call Transfer: Sending a call to a different
destination
To Transfer an active call:
2. Dial the Intercom number of the desired station,
3. On answer or Splash tone, speak to the called party.
1. Press [Trans/PGM],
2. Call receiving party,
3. Hang-up with or without announcement.
Using Camp-On when calling a busy station
To Camp-On (wait off-hook) for a busy station:
Call Hold: Placing a call in a waiting state
To place a call on Hold:
1. Press [*] and wait an answer.
Using Last Number Redial (LNR)
To dial the Last Number for an external call:
1. Lift the handset,
2. Select the [Redial] Soft button,
3. Press [̷
̷ volume ̵] to select from the last 10
numbers dialed,
4. Press the [Send] Soft button or [Hold/Save].
Using System Speed Dial Numbers
To place a call using System Speed Dial:
1. Lift the handset,
2. Press the [Speed] button,
3. Dial the desired System Speed Dial bin number
Using and Entering Station Speed Dial
Numbers
To place a call using Station Speed Dial:
1. Lift the handset,
2. Press [Speed],
3. Dial the desired Station Speed Dial bin number
1. Press [Hold/Save].
Joining Multiple People in a Conference
To establish a Conference:
1. Establish call with one of the desired conference
parties,
2. Select the [Conf] Soft button,
3. Establish call with the other conference party,
4. Select the [Conf] Soft button,
5. Select the [Conf] Soft button again to establish the
conference.
To place a Conference on Hold:
1. Press the [Hold/Save] button.
To retrieve the Conference:
1. Select the [Conf] Soft button.
To make an External-parties-only Conference:
1. Establish conference with two external parties,
2. Select the [Conf] Soft button to exit.
To enter pre-opened Conference Room:
1. Dial 5 7 X when X is the conference room number.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement