HUBBELL SystemOne - Hubbell Wiring Device

HUBBELL SystemOne - Hubbell Wiring Device
®
Wiring Systems
HUBBELL
SystemOne
Recessed
Floor Boxes
from the Leader in Delivery Systems
®
Wiring Systems
Hubbell Delivers
What Are Delivery Systems?
Hubbell Delivery Systems are a family of products that work
together to provide commercial buildings with access to power,
data, and AV. From floor boxes to ceiling enclosures – and
everything in between – Hubbell can deliver power, data, and
AV to wherever it’s needed. The Delivery Systems line keeps
schools, hotels, hospitals, retail facilities, and office buildings
all reliably, conveniently, and safely connected. No matter the
project, Hubbell Delivery Systems has a flexible, easy-to-access,
aesthetically pleasing solution.
Hubbell SystemOne One Look for Any Capacity
SystemOne – part of Hubbell’s Delivery Systems line – was born from a desire to
create a common look for fire-rated poke-throughs and floor boxes. This innovative
system allows you to create custom solutions for multi-service applications that require
both flush in-floor boxes and fire-rated poke-throughs.
2
Regardless of capacity or installation, this simple concept allows engineers, architects,
and contractors to select just one product line that will provide a uniform look throughout
an entire building – whether the power, data, and AV are being delivered in the floor or
through the floor.
Hubbell’s first SystemOne devices included a 4-inch flush fire-rated poke-through and floor
boxes that shared a common cover assembly. With the introduction of 4, 6 and 8-inch recessed
fire-rated poke-throughs, commercial buildings were provided with even more capacity options
without having to sacrifice matching high-end finishes.
The most recent addition to SystemOne is a full line of recessed floor boxes for concrete and raised
access floor applications. These recessed floor boxes guarantee a similar look for all capacities and
installations. They offer a traditional rectangular cover and installation, as well as the option to use
high-end round covers to match the recessed poke-through line.
2
www.hubbell-wiring.com
Hubbell SystemOne Recessed Floor Boxes
®
Wiring Systems
1
Covers
All SystemOne covers are ADA compliant.
The doors open to 180° for maximum
access. Cables and plugs are protected by
recessed connections.
1
The Family Look
Hubbell SystemOne Recessed Floor Box line
offers a common look regardless of capacity
or installation. This simple concept ensures
a consistent look throughout a building with
rectangular or round covers. Round covers lend
themselves to multi-story buildings, also using
Fire-Rated Poke-Through devices.
3
2
1 Screw 3 Fasteners
3
Easy Mount Device Plates
The Easy Mount device plates allow for a device to be
mounted to the plate and wired outside of the floor box.
The device and plate assembly are then easily installed
and secured with one stud that locates the plate and
one screw to secure it.
This patent pending device fastening method maximizes
efficiency while reducing install time and comes standard
with all device plates for 2, 4 and 6-Gang boxes.
www.hubbell-wiring.com
3
Pre-wired duplex or Style Line® receptacles
with 8 in. stranded leads are installed into
plates to allow for even more labor savings.
Hubbell SystemOne Recessed Floor Boxes for
®
Wiring Systems
Selecting a Concrete Floor Box
Table of Contents
To assist with the floor box selection process, please have the following information available:
Floor Boxes for
Concrete Floors
Electrical requirements:
Features.......................... 4-5
Application:
Power (each electrical device requires one gang) On-grade (OG)
Data/AV (consult manufacturers’ specification
Above-grade (AG)
for size/volume requirements), number required. Minimum concrete
Add up total number to determine needed
pour depth
capacity. If necessary capacity is not shown
round up to next size. Example: 9-Gang rounds
up to a 10-Gang floor box
2-Gang........................... 6-9
4-Gang........................... 10-13
6-Gang........................... 14-17
10-Gang......................... 18-21
Floor Boxes for
Raised Access and
Wood Floors
Cover style:
Round
Rectangular
Once this information is gathered start on the capacity column:
Features.......................... 22-23
2-Gang........................... 24-25
4-Gang........................... 26-27
4-Gang Round................ 28-29
1
Capacity: Select necessary box.
2
Application: Select the concrete pour depth and on-grade or above-grade application.
3
Cover style: Select round or rectangular cover.
4
Locate interconnecting point of all three categories and move to right to select
correct catalog number.
10-Gang......................... 30-31
Application - Minimum Pour Depth
2 ½ in.
AG
OG
3 in.
AG
3 ¼ in.
OG
AG
OG
3 ¾ in.
AG
OG
2
5 ½ in.
AG
OG
6 ¼ in.
AG
OG
•
CFB2G25
•
CFB2G25CR
•
CFB2G30
•
2-Gang
CFB2G30CR
•
CFB2G25R
•
CFB2G25RCR
•
CFB2G30R
•
CFB4G25
•
CFB4G25CR
•
CFB4G30
•
CFB4G30CR
•
4-Gang
CFB4G25R
•
CFB4G25RCR
•
CFB4G30R
•
CFB4G30RCR
•
CFB4G30RCI
•
CFB4G30CI
•
6-Gang
CFB6G30
•
CFB6G30CR
•
CFB6G30R
•
CFB6G30RCR
•
CFB10G55
•
10-Gang
CFB10G55CR
•
CFB10G55R
•
Rectangular Rectangular
Round
Round
Cover Style
4
Rectangular
CFB10G55RCR
Round
3
www.hubbell-wiring.com
4
•
Select Correct Catalog Number
Electrical Requirements - Capacity
1
CFB2G30RCR
Concrete Applications
®
Wiring Systems
Benefits and Enhancements
Safety
• Flush flange available for tile, finished concrete or Terrazzo
• Surface flange available for carpeted floors with 0.15 in. rise
meets ADA requirements
• Hideaway egress doors fold under cover while in use
• 180° opening of main door
Functionality
• Cables and connections are protected by recessed functionality
• Open architecture sub-plate design
• Common door layout regardless of flange for harmonized look
• Meets UL 514A scrub water requirements with
ScrubShield® technology
• Easy selection with common look for all floor types
Value
• Enhance building décor with numerous finishes
• Increase durability and longevity with cast aluminum covers
Online Resources
• BIM models, customer drawings and technical specifications are available on www.hubbell-wiring.com
Concrete Pour Pocket Cap
In concrete applications, all SystemOne
Recessed floor boxes include a yellow
pour pocket cap.
This factory-installed, field-removable
pour pocket cap provides a pocket in the
final floor to accept the covers intended
for terrazzo, tile, or finished concrete floor.
The cap may not be used for carpet,
wood or engineered floors.
2 Inch Conduit Ready
Corrosion Resistant
Epoxy Paint
To meet expanding AV and data
needs, the Hubbell SystemOne
Recessed Floor Box line readily
accepts 2 inch conduits with the use
of a 2 inch threaded conduit hub.
The offset design allows for less
conduit lifting while threading and the
hub mounting holes are asymmetrical
for installation efficiency.
www.hubbell-wiring.com
Intended for on-grade use,
the CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion.
5
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 2-Gang Recessed Concrete Floor Box
The Hubbell SystemOne 2-Gang
Recessed Concrete Floor Box
offers eight styles, satisfying
the requirements of almost any
commercial building application.
Rectangular or round covers, as
well as furniture feed covers, are
available in a variety of finishes to
blend with any existing or new décor.
A parallel-device layout reduces plug
interference, maximizing functionality
and performance.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available in round, rectangular and furniture feed styles
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depths of 2 ½ in. to 3 ¼ in.
• 16 gauge galvanized sheet metal construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
• 3 in. deep version accepts adapter (CFBHUB2) for 2 in. conduit
• Pre pour adjustment
• Meets UL 514A requirements and are UL scrub water compliant
• Patent pending, labor saving, easy mount device plates
6
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 2-Gang Floor Boxes
CFB2G30 Series - Rectangular Cover for 3 in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2) and a rectangular cover
• When a 3 in. concrete pour is required the insert is removed and requires the finished floor type to be
carpet or another engineered floor type
Includes:
• Two removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2) when needed
• A ½ in. plastic cover insert is included and allows for easy use in tile, finished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
Knockouts
CFB2G30
CFB2G30CR
Standard
On-grade
3 in.
2 ½ in.
35 cu. in.
24G/2GFF
½ in. to 2 in.*
CFB2G25 Series - Rectangular Cover for 2 ½ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a rectangular cover
• When a 2 ½ in. concrete pour is required the insert is removed and requires the finished floor type to be
carpet or another engineered floor type
Includes:
• A ½ in. plastic cover insert is included and allows for easy use in tile, finished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
Knockouts
CFB2G25
CFB2G25CR
Standard
On-grade
2 ½ in.
2 ½ in.
30 cu. in.
24G/2GFF
½ in. to 1 in.
CFB2G30R Series - Round Cover for 3 ¾ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2) and a round cover
• Minimum concrete pour of 3 ¾ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all floor finish types
Includes:
• Two removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2) when needed
Catalog
Number
Box
Type
CFB2G30R
CFB2G30RCR
Standard
On-grade
Min.Pour
Depth
3 ¾ in.
Plate
Depth
2 ½ in.
Device
Volume
Cover
Series
35 cu. in.
CFBS1R6/
CFBS1R6FF
Knockouts
½ in. to 2 in.*
CFB2G25R Series - Round Cover for 3 ¼ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a round cover
• Minimum concrete pour of 3 ¼ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all floor finish types
Catalog
Number
Box
Type
CFB2G25R
CFB2G25RCR
Standard
On-grade
Min.Pour
Depth
3 ¼ in.
Plate
Depth
2 ½ in.
Device
Volume
Cover
Series
30 cu. in.
CFBS1R6/
CFBS1R6FF
* 2 in. conduits requiire the use of CFBHUB2 (purchased separately). See page 9.
www.hubbell-wiring.com
7
Knockouts
½ in. to 1 in.
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 2-Gang Covers
• UL 514A Listed
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered floors)
• Compatible with CFB2G25, CFB2G25CR, CFB2G30 and CFB2G30CR
• Cover dimensions 11 11/16 in. x 7 3/16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Furniture Feed (1 in. and 2 in. Plugs)
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GCCVRALU
24GCCVRBK
24GCCVRBRS
24GCCVRBRZ
24GCCVRNK
24GCCVRALUC
24GCCVRBKC
24GCCVRBRSC
24GCCVRBRZC
24GCCVRNKC
2GCFFCVRALU
2GCFFCVRBK
2GCFFCVRBRS
2GCFFCVRBRZ
2GCFFCVRNK
Flush Style Rectangular Covers (for use with tile, finished concrete and Terrazzo floors)
• Compatible with CFB2G25, CFB2G25CR, CFB2G30 and CFB2G30CR
• Cover dimensions 10 11/16 in. x 6 3/16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Furniture Feed (1 in. and 2 in. Plugs)
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GTCVRALU
24GTCVRBK
24GTCVRBRS
24GTCVRBRZ
24GTCVRNK
24GTCVRALUC
24GTCVRBKC
24GTCVRBRSC
24GTCVRBRZC
24GTCVRNKC
2GTFFCVRALU
2GTFFCVRBK
2GTFFCVRBRS
2GTFFCVRBRZ
2GTFFCVRNK
Round Covers (for use with all floor types)
• Compatible with CFB2G25R, CFB2G25RCR, CFB2G30R and CFB2G30RCR
• Cover has a 7 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish
Flush Surface
Furniture Feed (¾ in. and 2 in. Plugs)
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R6CVRALU
CFBS1R6CVRBLK
CFBS1R6CVRBRS
CFBS1R6CVRBRZ
CFBS1R6CVRNKL
CFBS1R6FFCVRALU
CFBS1R6FFCVRBLK
CFBS1R6FFCVRBRS
CFBS1R6FFCVRBRZ
CFBS1R6FFCVRNKL
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
8
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 2-Gang Plates and Accessories
Plates for use in 2-, 4- and 6-Gang Floor Boxes
• UL 514A listed
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
Openings
FBMPDUP
FBMPMAAP
FBMPAAP
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock® Opening
1.60 in. Diameter
Cat. No. FBMP2IM
FBMP15IM
FBMP139
FBMP156
Plate
Style
Cable Feed Through
with Bushing
(1) Opening for
TracJack® or Series II®
(1) Opening with Hubbell ISF6
Frame for Keystone Jacks
FBMPFT
FBMPTRAC
FBMP6KS
Plate
Style
(1) Decorator
Opening
Cat. No. FBMPREC
Plate
Style
(2) 1U Hubbell
iStation Openings
1-Gang Blank
Cat. No. FBMPBNK
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 in. stranded leads mounted to the face plate
Description
Type
15A
20A
Duplex, Gray
Standard
PWFBMPCR15GRY
Tamper-Resistant PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray
Standard
PWFBMPDR15GRY
Tamper-Resistant PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
Accessories
Description
Catalog Number
2 in. threaded zinc hub for use with CFB2G30, CFB4G30 and
CFB6G30 series floor boxes; replaces CFBKOPLATE
CFBHUB2
Replacement knock-out plate
Replacement knock-out plate with epoxy coating
CFBKOPLATE
CFBKOPLATECR
Replacement wire-way, used to pass wires from one compartment
to the other, for use in CFB2G30/CR rectangular boxes
CFB2WW
Stackable ring to increase box height and concrete pour depth by ¾ in. CFB6RCVRR075
increments above top plane of floor box. One ring per ¾ in. depth increase.
Must be installed before concrete pour.
Finished floor height adjustment ring - increase post
pour adjustment; use with CFBS1R6 cover series
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB6RCVRR1*
CFB6RCVRR2
CFB6RCVRR3
*Included with standard CFB2G30R and CFB2G25R series.
FSR® is a registered trademark of FSR Inc.
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
9
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 4-Gang Recessed Concrete Floor Box
Similar to the 2-Gang Recessed
Concrete Floor Box, Hubbell’s
SystemOne 4-Gang Recessed
Concrete Floor Box is available with
rectangular or round covers. Ten
different styles make it possible to meet
the electrical requirements of most
commercial projects - new construction
or renovation. The parallel device layout
maximizes functionality which can be
limited when devices are mounted 90°
from one another.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available with round or rectangular covers
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depths of 2 ½ in. to 3 ¾ in.
• 16 gauge galvanized sheet metal and cast iron construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• 3 in. deep version accepts adapter (CFBHUB2) for 2 in. conduit
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
• Pre pour adjustment
• Meets UL 514A requirements and are scrub water compliant
• Patent pending, labor saving, easy mount device plates
10
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 4-Gang Floor Boxes
CFB4G30 Series – Rectangular Covers for 3 in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2) and a rectangular cover
• When a 3 in. concrete pour is required the insert is removed and requires the finished floor type to be
carpet or another engineered floor type
Includes:
• Four removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2)
when needed
• A ½ in. plastic cover insert is included and allows for easy use in tile, finished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
CFB4G30
CFB4G30CR
Standard
On-grade
3 in.
2 ½ in.
32.5 cu. in. 24G
½ in. to 2 in.*
CFB4G30CI
Cast Iron
3 ¾ in.
2 ½ in.
32.5 cu. in. 24G
¾ in. to 1½ in.
Knockouts
CFB4G25 Series – Rectangular Covers for 2 ½ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a rectangular cover
• When a 2 ½ in. concrete pour is required the insert is removed and requires the finished floor type to be
carpet or another engineered floor type
Includes:
• A ½ in. plastic cover insert is included and allows for easy use in tile, finished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
CFB4G25
CFB4G25CR
Standard
On-grade
2 ½ in.
2 ½ in.
26.5 cu. in. 24G
Knockouts
½ in. to 1 in.
CFB4G30R Series – Round Covers for 3 ¾ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2) and a round cover
• Minimum concrete pour of 3 ¾ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all floor finish types
Includes:
• Four removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2)
when needed
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
CFB4G30R
CFB4G30RCR
Standard
On-grade
3 ¾ in.
2 ½ in.
32.5 cu. in. CFBS1R8
½ in. to 2 in.*
CFB4G30RCI
Cast Iron
4 in.
2 ½ in.
32.5 cu. in. CFBS1R8
¾ in. to 1½ in.
Knockouts
CFB4G25R Series – Round Covers for 3 ¼ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a round cover
• Minimum concrete pour of 3 ¼ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all floor finish types
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
Knockouts
CFB4G25R
CFB4G25RCR
Standard
On-grade
3 ¼ in.
2 ½ in.
26.5 cu. in.
CFBS1R8
½ in. to 1 in.
* 2 in. conduits requiire the use of CFBHUB2 (purchased separately). See page 13.
www.hubbell-wiring.com
11
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 4-Gang Covers
• UL 514A Listed
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered floors)
• Compatible with CFB4G25, CFB2G25CR, CFB4G30, CFB4G30CR and CFB4G30CI
• Cover dimensions 11 11/16 in. x 7 3/16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GCCVRALU
24GCCVRBK
24GCCVRBRS
24GCCVRBRZ
24GCCVRNK
24GCCVRALUC
24GCCVRBKC
24GCCVRBRSC
24GCCVRBRZC
24GCCVRNKC
Flush Style Rectangular Covers (for use with tile, finished concrete and Terrazzo floors)
• Compatible with CFB4G25, CFB2G25CR, CFB4G30, CFB4G30CR and CFB4G30CI
• Cover dimensions 10 11/16 in. x 6 3/16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GTCVRALU
24GTCVRBK
24GTCVRBRS
24GTCVRBRZ
24GTCVRNK
24GTCVRALUC
24GTCVRBKC
24GTCVRBRSC
24GTCVRBRZC
24GTCVRNKC
Round Covers (for use with all floor types)
• Compatible with CFB4G25R, CFB4G25RCR, CFB4G30R, CFB4G30RCR and CFB4G30RCI
• Cover has a 9 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish
Flush Surface
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R8CVRALU
CFBS1R8CVRBLK
CFBS1R8CVRBRS
CFBS1R8CVRBRZ
CFBS1R8CVRNKL
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
12
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 4-Gang Plates and Accessories
Plates for use in 2-, 4- and 6-Gang Floor Boxes
• UL 514A listed
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
Openings
FBMPDUP
FBMPMAAP
FBMPAAP
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock® Opening
1.60 in. Diameter
Cat. No. FBMP2IM
FBMP15IM
FBMP139
FBMP156
Plate
Style
Cable Feed Through
with Bushing
(1) Opening for
TracJack® or Series II®
(1) Opening with Hubbell ISF6
Frame for Keystone Jacks
FBMPFT
FBMPTRAC
FBMP6KS
Plate
Style
(1) Decorator
Opening
Cat. No. FBMPREC
Plate
Style
(2) 1U Hubbell
iStation Openings
1-Gang Blank
Cat. No. FBMPBNK
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 in. stranded leads mounted to the face plate
Description
Type
15A
20A
Duplex, Gray
Standard
PWFBMPCR15GRY
Tamper-Resistant PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray
Standard
PWFBMPDR15GRY
Tamper-Resistant PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
Accessories
Description
Catalog Number
2 in. threaded zinc hub for use with CFB2G30, CFB4G30 and
CFB6G30 series floor boxes; replaces CFBKOPLATE
Replacement knock-out plate
Standard
Epoxy Coating
Replacement wire-way, used to pass wires from one
CFB4G30/CR
compartment to the other, for use in rectangular boxes CFB4G25/CR
CFBHUB2
Stackable ring to increase box height and concrete pour depth by ¾ in.
increments above top plane of floor box. One ring per ¾ in. depth increase.
Must be installed before concrete pour.
Finished floor height adjustment ring - increase post
0 - ¼ in.
pour adjustment; use with CFBS1R8 cover series
¼ in. - ½ in.
½ in. - ¾ in.
Replacement low voltage divider
CFB8RCVRR075
CFBKOPLATE
CFBKOPLATECR
CFB46WW
CFB4WW
CFB8RCVRR1*
CFB8RCVRR2
CFB8RCVRR3
CFB46DIV
*Included with standard CFB4G30R and CFB4G25R series.
FSR® is a registered trademark of FSR Inc.
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
13
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 6-Gang Recessed Concrete Floor Box
Increased power, data, and AV
capacity is what the Hubbell
SystemOne 6-Gang Recessed
Concrete Floor Box was designed
to handle. Four styles allow the
floor box to work within almost any
commercial application to enhance
connectivity. Rectangular and round
covers are available in a variety of
finishes that work with any aesthetic
or finish.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available with round or rectangular covers
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depth of 3 in. to 3 ¾ in.
• 16 gauge galvanized sheet metal construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• 3 in. deep version accepts adapter (CFBHUB2) for 2 in. conduit
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
• Pre pour adjustment
• Meets UL 514A requirements and are scrub water compliant
• Patent pending, labor saving, easy mount device plates
14
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 6-Gang Floor Boxes
CFB6G30 Series – Rectangular Covers for 3 in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2) and a rectangular cover
• When a 3 in. concrete pour is required the insert is removed and requires the finished floor type to be
carpet or another engineered floor type
Includes:
• Eight removable knock-out plates (1 per center device, 2 per gang) can be replaced with 2 in. zinc conduit hub
(CFBHUB2) when needed
• A ½ in. plastic cover insert is included and allows for easy use in tile, finished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
Knockouts
CFB6G30
CFB6G30CR
Standard
On-grade
3 in.
2 ½ in.
33 cu. in./
89 cu. in
610G
½ in. to 2 in.*
CFB6G30R Series – Round Covers for 3 ¾ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2) and a round cover
• Minimum concrete pour of 3 ¾ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all floor finish types
Includes:
• Eight removable knock-out plates (1 per center device, 2 per gang) can be replaced with 2 in. zinc conduit hub
(CFBHUB2) when needed
Catalog
Number
Box
Type
CFB6G30R
CFB6G30RCR
Standard
On-grade
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
Knockouts
2 ½ in.
33 cu. in./
89 cu. in
CFBS1R8
½ in. to 2 in.*
3 ¾ in.
* 2 in. conduits requiire the use of CFBHUB2 (purchased separately). See page 17.
Oversized Gangs
The 6-Gang floor box provides:
• Two (2) high capacity feed-thru gangs - allow for extra capacity when pulling wires or cables for a run of
boxes. Only one gang is needed when feeding a single service.
• Four (4) standard gangs - allow for maximum flexibility in configuring the box.
Note: Each box has a total of 6 1-Gang positions as shown below.
Oversized Gang
Oversized Gang
1
1
HIGH CAPACITY
FEED-THRU
GANGS
2
3
6
2
5
3
Oversized Gang
1
6
2
5
3
4
4
www.hubbell-wiring.com
Oversized Gang
Oversized Gang
15
6
5
4
Oversized Gang
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 6-Gang Covers
• UL 514A Listed
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered floors)
• Compatible with CFB6G30 and CFB6G30CR
• Cover dimensions 11 ½ in. x 10 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GCCVRALU
610GCCVRBK
610GCCVRBRS
610GCCVRBRZ
610GCCVRNK
610GCCVRALUC
610GCCVRBKC
610GCCVRBRSC
610GCCVRBRZC
610GCCVRNKC
Flush Style Rectangular Covers (for use with tile, finished concrete and Terrazzo floors)
• Compatible with CFB6G30 and CFB6G30CR
• Cover dimensions 10 ½ in. x 9 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GTCVRALU
610GTCVRBK
610GTCVRBRS
610GTCVRBRZ
610GTCVRNK
610GTCVRALUC
610GTCVRBKC
610GTCVRBRSC
610GTCVRBRZC
610GTCVRNKC
Round Covers (for use with all floor types)
• Compatible with CFB6G30R and CFB6G30RCR
• Cover has a 9 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish
Flush Surface
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R8CVRALU
CFBS1R8CVRBLK
CFBS1R8CVRBRS
CFBS1R8CVRBRZ
CFBS1R8CVRNKL
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
16
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 6-Gang Plates and Accessories
Plates for use in 2-, 4- and 6-Gang Floor Boxes
• UL 514A listed
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
Openings
FBMPDUP
FBMPMAAP
FBMPAAP
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock® Opening
1.60 in. Diameter
Cat. No. FBMP2IM
FBMP15IM
FBMP139
FBMP156
Plate
Style
Cable Feed Through
with Bushing
(1) Opening for
TracJack® or Series II®
(1) Opening with Hubbell ISF6
Frame for Keystone Jacks
FBMPFT
FBMPTRAC
FBMP6KS
Plate
Style
(1) Decorator
Opening
Cat. No. FBMPREC
Plate
Style
(2) 1U Hubbell
iStation Openings
1-Gang Blank
Cat. No. FBMPBNK
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 in. stranded leads mounted to the face plate
Description
Type
15A
20A
Duplex, Gray
Standard
PWFBMPCR15GRY
Tamper-Resistant PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray
Standard
PWFBMPDR15GRY
Tamper-Resistant PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
Accessories
Description
Catalog Number
2 in. threaded zinc hub for use with CFB2G30, CFB4G30 and
CFB6G30 series floor boxes; replaces CFBKOPLATE
CFBHUB2
Replacement knock-out plate
Standard
CFBKOPLATE
Epoxy Coating CFBKOPLATECR
Replacement wire-way, used to pass wires from one
compartment to the other, for use in rectangular boxes
CFB4G30/CR CFB46WW
Stackable ring to increase box height and concrete pour depth by ¾ in. CFB8RCVRR075
increments above top plane of floor box. One ring per ¾ in. depth increase.
Must be installed before concrete pour.
Finished floor height adjustment ring - increase post
pour adjustment; use with CFBS1R8 cover series
Replacement low voltage divider
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB8RCVRR1*
CFB8RCVRR2
CFB8RCVRR3
CFB46DIV
*Included with standard CFB6G30R series.
FSR® is a registered trademark of FSR Inc.
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
17
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 10-Gang Recessed Concrete Floor Box
With maximum capacity in a small
footprint, the 10-Gang box provides
a uniform look with rectangular or
round covers that are available in
several finishes to complement
existing décor. Electrical devices are
mounted vertically and are mounted
to the plate prior to securing it to
the box. Two inch knockouts are
designed into each box allowing for
simple installation of AV cables with
pre-connectorized heads and specific
bend radius requirements.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available with round or rectangular covers
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depths of 5 ½ in. to 6 ¼ in.
• 16 gauge galvanized sheet metal construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• Pre pour adjustment
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
• Meets UL 514A requirements and are scrub water compliant
18
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 10-Gang Floor Boxes
CFB10G55 Series – Rectangular Covers for 5 ½ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (integrated 2 in. knockouts) and a rectangular cover
• When a 5 ½ in. concrete pour is required the insert is removed and requires the finished floor type to be
carpet or another engineered floor type
Includes:
• A ½ in. plastic cover insert is included and allows for easy use in tile, finished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series
Knockouts
CFB10G55
CFB10G55CR
Standard
On-grade
5 ½ in.
2 ½ in.
33 cu. in./
89 cu. in
610G
¾ in. to 2 in.
CFB10G55R Series – Round Covers for 6 ¼ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (integrated 2 in. knockouts) and a round cover
• Minimum concrete pour of 6 ¼ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all floor finish types
Catalog
Number
Box
Type
Min.Pour
Depth
CFB10G55R
CFB10G55RCR
Standard
On-grade
6 ¼ in.
Plate
Depth
Device
Volume
Cover
Series
Knockouts
2 ½ in.
33 cu. in./
89 cu. in
CFBS1R8
¾ in. to 2 in.
Plate Layout - NEC® Required Volume
CFB10NEMA46
148 cu. in.
CFB10NEMA
Standard layout
68 cu. in.
25 cu. in.
1
80 cu. in.
48 cu. in.
2
71 cu. in.
3
4
5
CFB10NEMA
WIRE-WAY
10
Standard layout
25 cu. in.
CFB10NEMA
FB10MPNEMA4G
9
8
48 cu. in.
68 cu. in.
7
6
71 cu. in.
80 cu. in.
148 cu. in.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
www.hubbell-wiring.com
19
FB10MPNEMA4G
®
Wiring Systems
SystemOne for Concrete Floors
Hubbell SystemOne 10-Gang Covers
• UL 514A Listed
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered floors)
• Compatible with CFB10G55 and CFB10G55CR
• Cover dimensions 11 ½ in. x 10 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GCCVRALU
610GCCVRBK
610GCCVRBRS
610GCCVRBRZ
610GCCVRNK
610GCCVRALUC
610GCCVRBKC
610GCCVRBRSC
610GCCVRBRZC
610GCCVRNKC
Flush Style Rectangular Covers (for use with tile, finished concrete and Terrazzo floors)
• Compatible with CFB10G55 and CFB10G55CR
• Cover dimensions 10 ½ in. x 9 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish
Flush Surface
With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GTCVRALU
610GTCVRBK
610GTCVRBRS
610GTCVRBRZ
610GTCVRNK
610GTCVRALUC
610GTCVRBKC
610GTCVRBRSC
610GTCVRBRZC
610GTCVRNKC
Round Covers (for use with all floor types)
• Compatible with CFB10G55R and CFB10G55RCR
• Cover has a 9 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish
Flush Surface
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R8CVRALU
CFBS1R8CVRBLK
CFBS1R8CVRBRS
CFBS1R8CVRBRZ
CFBS1R8CVRNKL
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
20
www.hubbell-wiring.com
SystemOne for Concrete Floors
®
Wiring Systems
Hubbell SystemOne 10-Gang Plates and Accessories
CFB10 Series – Plates
Plate
Style
(1) Decorator
Opening
Cat. No. FB10MPREC
(1) Duplex
Opening
FB10MPDUP
Blank
FB10MPBNK
Decorator Opening Plate
Including Hubbell ISF6GY
FB10MPKEY
(2) Openings to Accommodate
(6) Ortronics TrackJack®
FB10MPTRAC
Plate
Style
(4) Extron® MAAP
Modules
FB10MPMAAP
(4) Extron® AAP
Modules
FB10MPAAP
For (6) 1U Hubbell
iStation Modules
FB10MP2B
Replacement Spacer
Around Wire-Way
FB10MPX
(2) Decorator
Cat. No. FB10MP2A
(1) Twist-Lock® Opening (1) Simplex Opening
1.40 in. Dia.
1.60 in. Dia.
Plate
Style
(Uses 2 Gangs)
Cat. No. FB10TLA
(2) Twist-Lock® Opening (2) Simplex Opening
1.40 in. Dia.
1.60 in. Dia.
(Uses 2 Gangs)
FB10TLX
(3) Twist-Lock® Opening
1.60 in. Dia.
Plate
(Uses 5 Gangs)
Style
Cat. No. FB10TLC
(3) Simplex Opening
1.40 in. Dia.
(Uses 5 Gangs)
FB10TLZ
(1) Opening for
Appliance Receptacle
(Uses 3 Gangs)
(Uses 3 Gangs)
(Uses 3 Gangs)
FB10TLB
FB10TLY
FB10MP3GAPP
(2) 2-Gang. Meets NEMA
Spacing Ideal for Crestron®
DM –TX Product and Power
CFB10NEMA
(4) Single Service Openings
Utilizing NEMA Wallplate
(Uses 5 Gangs)
FB10MPNEMA4G
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 inch stranded leads mounted to the face plate
Description
Type
Duplex, Gray
Standard
PWFB10MPCR15GRY
PWFB10MPCR20GRY
Tamper-Resistant PWFB10MPCR15GRYTR PWFB10MPCR20GRYTR
15A
20A
Decorator, Gray
Standard
PWFB10MPDR15GRY
PWFB10MPDR20GRY
Tamper-Resistant PWFB10MPDR15GRYTR PWFB10MPDR20GRYTR
Accessories
Description
Catalog Number
Replacement wire-way, used to pass wires from one compartment
to the other, for use in CFB10G55/CR rectangular boxes
Replacement low voltage divider
Stackable ring to increase box height and concrete pour depth by ¾ in.
increments above top plane of floor box. One ring per ¾ in. depth increase.
Must be installed before concrete pour.
CFB10WW
Finished floor height adjustment ring - increase post
pour adjustment; use with CFB10G30R cover series
CFB8RCVRR1*
CFB8RCVRR2
CFB8RCVRR3
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB10DIV
CFB8RCVRR075
*Included with standard CFB10G30R series.
FSR® is a registered trademark of FSR Inc.
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
21
®
Hubbell SystemOne Recessed Floor Boxes for
®
Wiring
Wiring
Systems
Systems
Selecting a Raised Access Floor Box
To assist with the floor box selection process please have the following information available:
Electrical requirements:
Box depth
Cover style:
Power (each electrical device requires one gang)
Data/AV (consult manufacturers’ specification for
size/volume requirements), number required.
Determine maximum
tile thickness and
station height and add
together. Box depth
Add up total number to determine needed capacity.
If necessary capacity is not shown round up to next size. can not exceed total.
Example: 9-Gang rounds up to a 10-Gang floor box.
Round
Rectangular
Once this information is gathered start on the right column “capacity” select necessary box, then select
the concrete pour depth and on-grade or above-grade application, and finally cover style. Locate inter
connecting point of all three categories and move to right to select correct catalog number.
1
Capacity: Select necessary box.
2
Box Depth: Determine maximum possible depth (tile and station height total) and select a depth less
than the calculated height.
3
Cover Style: Select Round or Rectangular, not all box sizes are available in round.
4
Locate interconnecting point of all three categories and move to right to select correct catalog number.
Box Depth
2 ½ in.
3 in.
5 in.
5 ½ in.
6 ¼ in.
AFB2G25
•
AFB2G25CHI
4
•
•
AFB2G50
•
AFB2G50CHI
•
AFB4G25
•
AFB4G25CHI
4-Gang
•
AFB4G50
•
AFB4G50CHI
•
10-Gang
Rectangular
Rectangular
Furniture Feed Furniture Feed
Cover Style
22
RAFB4BASE
•
AFB10G55
•
AFB10G55CHI
Rectangular
Select Correct Catalog Number
Capacity
1
2-Gang
2 ½ in.
2
Round
3
www.hubbell-wiring.com
Raised Access Applications
®
Wiring Systems
Benefits and Enhancements
Safety
• Low profile flanges meet ADA requirements
• Hide-away egress door fold under cover while in use
• 180° opening of main doors
Functionality
• Cables and connections are protected by recessed
functionality
• Open architecture sub-plate design
• Dirt ingress reduced by egress door brushes
• Meets UL 514A scrub water requirements with
ScrubShield® technology
• Easy selection with common flange for all floor types
• Round and rectangular box versions available
Value
• Enhance building décor with numerous finishes
• Increase durability and longevity with cast aluminum covers
Online Resources
• BIM models, customer drawings and technical specifications are available on www.hubbell-wiring.com
Visit web site for information on Hubbell's Pre-wired, Plug and Play, Connexion® System.
www.hubbell-wiring.com
23
®
Wiring Systems
SystemOne for Raised Access Floors
Hubbell SystemOne 2-Gang Rectangular Raised Access Floor Box
Ideal for applications that call for basic
power and data/AV requirements. The
2-Gang boxes can be used as an
access point to electrical or data
connections, or as a furniture feed
to power interior furniture partitions.
Available in two box depths, the 2 ½
in. depth works well in floors using
short pedestals; the 5 in. depth is ideal
for furniture feed applications. The
rectangular covers are available
in assorted finishes to enhance any
design scheme.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
• Furniture feed covers available
Box
• 16 gauge galvanized sheet metal construction
• 6 in. solid conductor ground pigtail in each gang
• 2 ½ in. or 5 in. box depths
• 5.0 in. deep box allows for 2 in. conduits
• Mounts in tiles ¾ in. to 2 in. thick
• Fits is 6 ¾ in. x 12 7/8 in. opening
• Patent pending, labor saving, easy mount device plates
24
www.hubbell-wiring.com
SystemOne for Raised Access Floors
®
Wiring Systems
2-Gang Rectangular Floor Boxes, Covers and Plates
AFB2G Series – Rectangular Box
• Designed for wood and tile applications
• 5 in. deep box allows for 2 in. conduits - ideal for furniture feed applications
• 2 ½ in. provides a solution for floors using short pedestals
Catalog
Number
Box
Type
Knockouts
Box
Depth
AFB2G50
AFB2G50CHI
AFB2G25
AFB2G25CHI
Standard
Chicago
Standard
Chicago
½ in. to 2 in.
5 in.
None
½ in. and ¾ in.
2 ½ in.
None
Max Tile Plate
Thickness Depth
Device
Volume
Cover
Series
2 in.
2 ½ in.
60 cu. in. 2GAFB
2 in.
2 ½ in.
30 cu. in. 2GAFB
Rectangular Covers (for use with raised access tiles and wood floors)
•
•
•
•
Die cast construction available in five finishes
UL 514A listed
Furniture feed includes one 2 in. conduit hub and one 1 in. conduit hub with reducer to ¾ in.
Maximum static load of 800 lbs with 2x safety factor*
Finish
Surface Style Cover
Surface Style
Cover with Insert
Furniture Feed Cover
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
2GAFBCVRALU
2GAFBCVRBK
2GAFBCVRBRS
2GAFBCVRBRZ
2GAFBCVRNK
2GAFBCVRALUC
2GAFBCVRBKC
2GAFBCVRBRSC
2GAFBCVRBRZC
2GAFBCVRNKC
2GAFBFFCVRALU
2GAFBFFCVRBK
2GAFBFFCVRBRS
2GAFBFFCVRBRZ
2GAFBFFCVRNK
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
Plates - for use in 2, 4 and 6-Gang Floor Boxes
• UL 514A listed
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
Openings
Cat. No.
FBMPREC
FBMPDUP
FBMPMAAP
FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock® Opening
1.60 in. Diameter
Cat. No.
FBMP2IM
FBMP15IM
FBMP139
FBMP156
Plate
Style
1-Gang Blank
Cable Feed Through (1) Opening for
(1) Opening w/ Hubbell ISF6
with Bushing
TracJack® or Series II® Frame for Keystone Jacks
Cat. No.
FBMPBNK
FBMPFT
FBMPTRAC
FBMP6KS
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc.
FSR® is a registered trademark of FSR Inc.
TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
25
®
Wiring Systems
SystemOne for Raised Access Floors
Hubbell SystemOne 4-Gang Rectangular Raised Access Floor Box
The Hubbell SystemOne 4-Gang
Recessed Raised Access Floor Box
delivers AV plus power. Similar to the
2-Gang recessed raised access floor
box, the 4-Gang 2 ½ inch box depth
provides a solution for floors using
short pedestals. The 5 inch depth
is ideal for applications with a lot of
requirements. Rectangular covers
in a variety of finishes will match any
existing or new style.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
Box
• 16 gauge galvanized sheet metal construction
• 6 in. solid conductor ground pigtail in each gang
• 2 ½ in. or 5 in. box depths
• 5.0 in. deep box allows for 2 in. conduits
• Mounts in tiles ¾ in. to 2 in. thick
• Fits is 11 in. x 11 in. opening
• Patent Pending, labor saving, easy mount device plates
26
www.hubbell-wiring.com
SystemOne for Raised Access Floors
®
Wiring Systems
4-Gang Floor Rectangular Boxes, Covers and Plates
AFB4G Series – Rectangular Box
• Designed for wood and tile applications
• 2 ½ in. provides a solution for floors using short pedestals
• 5 in. deep box allows for 2 in. conduits - ideal for furniture feed applications
Catalog
Number
Box
Type
Knockouts
Box
Depth
AFB4G50
AFB4G50CHI
AFB4G25
AFB4G25CHI
Standard
Chicago
Standard
Chicago
½ in. to 2 in.
5 in.
None
½ in. and ¾ in.
2 ½ in.
None
Max Tile Plate
Thickness Depth
Device
Volume
Cover
Series
2 in.
2 ½ in.
57.5 cu. in. 4GAFB
2 in.
2 ½ in.
26.5 cu. in. 4GAFB
Rectangular Covers (for use with raised access tiles and wood floors)
• Die cast construction available in five finishes
• UL 514A listed
• Maximum static load of 1500 lbs with 2x safety factor*
Finish
Surface Style Cover
Surface Style Cover with Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
4GAFBCVRALU
4GAFBCVRBK
4GAFBCVRBRS
4GAFBCVRBRZ
4GAFBCVRNK
4GAFBCVRALUC
4GAFBCVRBKC
4GAFBCVRBRSC
4GAFBCVRBRZC
4GAFBCVRNKC
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
Plates for use in 2, 4 and 6-Gang Floor Boxes
• UL 514A listed
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
Openings
Cat. No.
FBMPREC
FBMPDUP
FBMPMAAP
FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock® Opening
1.60 in. Diameter
Cat. No.
FBMP2IM
FBMP15IM
FBMP139
FBMP156
Plate
Style
1-Gang Blank
Cable Feed Through (1) Opening for
(1) Opening w/ Hubbell ISF6
with Bushing
TracJack® or Series II® Frame for Keystone Jacks
Cat. No.
FBMPBNK
FBMPFT
FBMPTRAC
FBMP6KS
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc.
FSR® is a registered trademark of FSR Inc.
TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
27
®
Wiring Systems
SystemOne for Raised Access Floors
Hubbell SystemOne 4-Gang Round Raised Access Floor Box
With an 8 in. diameter, the Hubbell
SystemOne 4-Gang Round
Recessed Floor Box is ideal for use
in raised access floors with pre-cut
tile or wood floor coverings. With a
variety of finish selections, the round
covers blend in with the flooring
and overall design of the building.
Deep, 2 ¾ in. wiring compartments
are ready to accommodate today’s
most advanced, high-performance
power, data, and AV needs to
supply reliable connectivity.
Cover
• 180° cover opening
• Two large cable egress doors
• UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
Incorporates four equally
sized device mounting plates
that accommodate NEMA
devices and an array of 3rd
party modules.
Box
• Fits in 8 in. diameter air diffuser holes
• 16 gauge galvanized sheet metal construction
• Individual grounding screws for each gang
• 2 in. knock-out on the bottom allows for large amounts
of data and/or AV devices
• Mounts in tiles ¾ in. to 2 in. thick
28
www.hubbell-wiring.com
SystemOne for Raised Access Floors
®
Wiring Systems
4-Gang Round Floor Boxes, Covers and Plates
RAFB4 Series – Round Floor Box
Includes:
• Base box shipped with temporary install cover
Catalog
Number
Cover Series
Depth
Tile
Thickness
Plate
Depth
Knockouts
RAFB4BASE
CFBS1R8
6 ¼ in.
¾ in. - 2 in.
2 ¾ in.
¾ in. - 2 in. 8 in.
Diameter
RAFB4 Series – Round Floor Box with Cover
Includes:
• RAFB4BASE and 8 in. cover
Cover Finish
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
Catalog
Number
RAFB4ALU
RAFB4BLK
RAFB4BRS
RAFB4BRZ
RAFB4NKL
RAFB4 Series – Plates
• All RAFB4SP series plates are powder coated white
Plate
Style
(1) Duplex
Blank
Cat. No. RAFB4SPDECO
(1) Decorator
RAFB4SPDUPLEX
RAFB4SPBLANK
Plate
Style
(1) Twist-Lock® Opening
1.60 in. Diameter
(1) Hubbell iStation
Opening for 3 Units
RAFB4SPTL16
RAFB4SP3UIS
(3) Extron®
MAAP Modules
(2) Extron®
AAP Modules
RAFB4SP3MAAP
RAFB4SP2AAP
(1) Simplex Opening
1.40 in. Dia.
Cat. No. RAFB4SPTL14
Plate
Style
Opening to Accept Bezels
for Ortronics TracJack®
Cat. No. RAFB4SPORT
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc.
FSR® is a registered trademark of FSR Inc.
TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
29
®
Wiring Systems
SystemOne for Raised Access Floors
Hubbell SystemOne 10-Gang Rectangular Raised Access Floor Box
Designed to serve high-capacity,
multi-service applications, the 10-Gang
floor box supports installation with an
array of Hubbell power, data and AV
devices. Third-party mounting plates
are available for other manufacturers’
devices, including FSR®, Crestron®
and Extron®. A 5 ½ in. box depth
offers great capacity for connectivity,
with the ability accept 2 in. conduit to
meet growing AV and data needs. The
rectangular covers come in a variety
of colors and finishes to enhance any
building’s design.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
Box
• 16 gauge galvanized sheet metal construction
• 6 in. solid conductor ground pigtail in each gang
• 5 ½ in. deep box allows for 2 in. conduits
• Mounts in tiles ¾ in. to 2 in. thick
• Fits is 11 in. x 11 in. opening
30
www.hubbell-wiring.com
SystemOne for Raised Access Floors
®
Wiring Systems
10-Gang Floor Rectangular Boxes, Covers and Plates
AFB10G Series – Rectangular Box
• Designed for wood and tile applications
• 5 ½ in. deep box allows for 2 in. conduits - ideal for furniture feed applications
Catalog
Number
Box
Type
Knockouts
AFB10G55
AFB10G55CHI
Standard
Chicago
½ in. to 2 in.
None
Box
Depth
Max Tile Plate
Thickness Depth
Device
Volume
5.5 in.
2.0 in.
57.5 cu. in. 10GAFB
2.5 in
Cover
Series
Rectangular Covers (for use with raised access tiles and wood floors)
• Die cast construction available in five finishes
• UL 514A listed
• Maximum static load of 1500 lbs with 2x safety factor*
Finish
Surface Style Cover
Surface Style Cover with Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
10GAFBCVRALU
10GAFBCVRBK
10GAFBCVRBRS
10GAFBCVRBRZ
10GAFBCVRNK
10GAFBCVRALUC
10GAFBCVRBKC
10GAFBCVRBRSC
10GAFBCVRBRZC
10GAFBCVRNKC
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
CFB10 Series – Plates
Plate
Style
(1) Decorator
Opening
Cat. No. FB10MPREC
(1) Duplex
Opening
FB10MPDUP
Blank
FB10MPBNK
Decorator Opening Plate
Including Hubbell ISF6GY
FB10MPKEY
(2) Openings to Accommodate
(6) Ortronics TrackJack®
FB10MPTRAC
Plate
Style
(4) Extron® MAAP
Modules
FB10MPMAAP
(4) Extron® AAP
Modules
FB10MPAAP
For (6) 1U Hubbell
iStation Modules
FB10MP2B
Replacement Spacer
Around Wire-Way
FB10MPX
(2) Decorator
Cat. No. FB10MP2A
(1) Twist-Lock® Opening (1) Simplex Opening
1.40 in. Dia.
1.60 in. Dia.
Plate
Style
(Uses 2 Gangs)
Cat. No. FB10TLA
(3) Twist-Lock® Opening
1.60 in. Dia.
Plate
Style
(Uses 5 Gangs)
Cat. No. FB10TLC
(Uses 2 Gangs)
FB10TLX
(3) Simplex Opening
1.40 in. Dia.
(Uses 5 Gangs)
FB10TLZ
(2) Twist-Lock® Opening (2) Simplex Opening
1.40 in. Dia.
1.60 in. Dia.
(1) Opening for
Appliance Receptacle
(Uses 3 Gangs)
(Uses 3 Gangs)
(Uses 3 Gangs)
FB10TLB
FB10TLY
FB10MP3GAPP
(2) 2-Gang. Meets NEMA
Spacing Ideal for Crestron®
DM –TX Product and Power
CFB10NEMA
(4) Single Service Openings
Utilizing NEMA Wallplate
(Uses 5 Gangs)
FB10MPNEMA4G
FSR® is a registered trademark of FSR Inc.
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
31
HUBBELL SystemOne
Online Resources
BIM Models
Visit www.hubbell-wiring.com
or seek.autodesk.com to
download all Hubbell Wiring
device BIM Models.
Customer and Technical
Drawings
Customer and technical
drawings and installation
instructions can be downloaded
at www.hubbell-wiring.com.
Delivery Systems eTour
This interactive, virtual tour
of a city demonstrates where
and how Hubbell products
can be deployed in the floor,
through the floor, on the wall,
on the surface and from floor
to ceiling and demonstrates
solutions in these spaces.
Visit www.hubbell-wiring.com
to take the tour.
Available Literature
Hubbell offers an extensive
literature library for product
support. Downloadable
PDFs are available online.
Hubbell SystemOne
Recessed 4, 6 and 8-Inch
Fire-Rated Poke-Throughs
®
Wiring Systems
Hubbell Wiring Device-Kellems
Hubbell Incorporated (Delaware)
40 Waterview Drive, Shelton, CT 06484
Phone (800) 288-6000 • FAX (800) 255-1031
Hubbell SystemOne
Selector Wheel
www.hubbell-wiring.com
www.hubbell-premise.com
Hubbell Premise Wiring
Hubbell Incorporated (Delaware)
23 Clara Drive, Suite 103, Mystic, CT 06355
Phone (800) 626-0005 • FAX (860) 535-8328
Printed in U.S.A. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated.
WLBD011
9/16
HUBBELL SystemOne
Online Resources
BIM Models
Visit www.hubbell-wiring.com
or seek.autodesk.com to
download all Hubbell Wiring
device BIM Models.
Customer and Technical
Drawings
Customer and technical
drawings and installation
instructions can be downloaded
at www.hubbell-wiring.com.
Delivery Systems eTour
This interactive, virtual tour
of a city demonstrates where
and how Hubbell products
can be deployed in the floor,
through the floor, on the wall,
on the surface and from floor
to ceiling and demonstrates
solutions in these spaces.
Visit www.hubbell-wiring.com
to take the tour.
Available Literature
Hubbell offers an extensive
literature library for product
support. Downloadable
PDFs are available online.
Hubbell SystemOne
Recessed 4, 6 and 8-Inch
Fire-Rated Poke-Throughs
Hubbell SystemOne
Selector Wheel
®
Wiring Systems
www.hubbellonline.com
Hubbell Canada LP • Wiring Products Division • 870 Brock Road South • Pickering, ON L1W 1Z8
Phone (905) 839-1138 • FAX (905) 839-9108
Printed in U.S.A. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated.
H3317
6/15
HUBBELL SystemOne
Online Resources
BIM Models
Visit www.hubbell-wiring.com
or seek.autodesk.com to
download all Hubbell Wiring
device BIM Models.
Customer and Technical
Drawings
Customer and technical
drawings and installation
instructions can be downloaded
at www.hubbell-wiring.com.
Delivery Systems eTour
This interactive, virtual tour
of a city demonstrates where
and how Hubbell products
can be deployed in the floor,
through the floor, on the wall,
on the surface and from floor
to ceiling and demonstrates
solutions in these spaces.
Visit www.hubbell-wiring.com
to take the tour.
Available Literature
Hubbell offers an extensive
literature library for product
support. Downloadable
PDFs are available online.
Hubbell SystemOne
Recessed 4, 6 and 8-Inch
Fire-Rated Poke-Throughs
®
Wiring Systems
Hubbell SystemOne
Selector Wheel
[email protected]
www.hubbell.com.mx
Hubbell de México • Insurgentes Sur 1228 Piso 8 • Col. Tlacoquemecatl del Valle • CP 03200 México DF
Tel: (55) 9151 9999 / 01800 200 48235 • [email protected] • www.hubbell.com.mx
Printed in U.S.A. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated.
WLBD011MX
6/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement