lab equipment

lab equipment
EN
2013/2014
LASSIC
CLAB
EQUIPMENT
SYSTEM COMPONENTS
Looking for simplicity,
precision and affordability?
We understand your needs!
L A B EQU IPM ENT CLASSIC
YOUR + points
_ Cost-effective precision models for every laboratory
_ Precision from A to Z for perfect work preparation
HIGH
CO
TS
H A N D LIN
PRECI
LY
N
G
O
FECTL
ER
W
RKFL
P
WO
COORDI
SE
€
Y
TED
NA
TIMIS
OP
ED
TIME-
_ Simple and user-friendly operation
MPONE
C|2
SYSTEM COMPONENTS
Precision from start to finish.
ARTICULATION
MODEL FABRICATION
facebow
Model management articulator and
masticatory loading simulator for the
dental practice and laboratory
Anatomically correct fixation
of the cranial-axis relationship in
just 2 minutes
_ Provides all functions for analysing the free
spaces and excursion patterns
_ Cranium-axis orientated model transfer to
the articulator reduces the time required for
spot grinding
_ Variable sideshift function for transversal
clearance, adjustable
_ Quick and secure the 3-D universal joint
Precise, low-priced and quick for
cost-optimised precision models
_ Overcomes expansion of dental stone
due to segmentation of the dental arch
_Model made in just six minutes
_ Perfect “basis” (precision model) for
digitisation
_ Reliable reproducibility of the arbitrary axis
position
Artex
®
C|3
C | 12
Artex facebow
®
C | 22
Giroform
®
C | 23
DOSING | MIXING | CLEANING
The most homogenous plaster
dispensing method yet
_ 20 % to 25 % saving in time, material and
dental stone
_ Reproducible mixing ratio at the push of a
button, accurate to within a gram
Perfect mixture results thanks to patented mixing blade geometry and amazingly simple operating concept
The indication champion for
zirconium oxide
_ Consistent, reproducible mixtures with optimal
parameter
_ Optimal workflow through spherical shells
_ Quick access to all required mixing parameters
_ Multifunctional rotary/ push button for easy,
quick operation
_ Meets the requirements of modern high-performance plasters and embedding masses
Smartbox X2
Smartmix X2
C | 34
C | 35
_ Small price, wide range of applications
_ Common, dental technical working method,
easy to learn
Ceramill Multi-X
C | 42
MILLING | CASTING
Fully automatic high-performance
furnace for final sintering of
distortion-free frameworks
_ Optimally coordinated, fully automatic
sinter programme
_ High process reliability due to constant
temperature control and homogeneous
temperature distribution
The “electric” Bunsen burner
replaces the open flame
Universal use thanks to modular
components
_ Mobile and immediately operational,
no gas required
_ High-precision milling machine. Due to its
modular construction it can be used for
surveying or blocking out
_ No heat emission into the environment;
does not consume oxygen
_ Clean, i.e. no soot particles on instrument
and/or material
_ 4 sintering programme locations;
one of them individually programmable
by the user
Ceramill Therm
C | 43
Noflame Plus
®
C | 56
AF350
C | 58
S YEST THEOMD C O M P O N E N T S
M
From the impression to the finished, high-precision
Giroform model and application in the Artex articulator*
®
®
1
2
Trim the impression (working model)
3
The impression is fixed onto the
impression carrier with Giroform —
putty, align the impression and putty
insulation is trimmed
®
5
6
When the Giroform pins have been
inserted into the drilled holes, the
base plate is put aside for later use.
(Important when multiple models
are produced)
®
9
Trimmed impression of the opposing
jaw on impression carrier, while the
holes for the 8 pins are drilled for
the counter bite
10
4
With the Giroform base plate
inserted, the impression carrier is
attached to the plate holder
®
7
Position drilling hole with the aid of
the laser beam and initiate drilling
procedure
8
Mark out the selected drilling hole on
used base plate (multiple usages)
11
Used plate with drilled holes and pins
for opposite bite
12
Smartbox – push button for water
and plaster powder dosage
Smartmix mixes the dental arch
plaster
Upper and lower jaw prior to stone
pour in each case with pinned bases
Fill the alpenrock eliminating any
voids into the impression model –
only to the top of the putty insulation
13
14
15
16
After 30 minutes, the dental arch is
detached from the base plate
Partition/saw tooth arch into segments (Tip: in order not to damage
the tooth arch, first separate the
tooth arch in the middle)
Giroform model pair
®
At the dental lab, the transfer table
is placed in the articulator or the
special mounting articulator used as
a plastering device
*Method can be used for patients with optimally functioning pre-condition.
C|6
S YEST THEOMD C O M P O N E N T S
M
17
18
19
20
Artex CR with inserted upper jaw
model
Giroform -Models were articulated
in static occlusion using a face bow
registration
Mark out the grinding facets on the
occlusion with a pencil
Reduce the master model for height
analysis. Remove all segments up
to the neighbouring teeth from the
model
21
22
23
24
Open the side shift setting screw to
open the ISS. Set the anterior guidance pin out of contact
To determine the height the antagonists are put into their deepest position alongside one another. Articulator centric is open
Re-insert the other segments and
remove the segments that determine
the height. Use articulating film to
mark out and adjust any premature
contacts - with the centric articulator
relation closed
Check the dynamic occlusion – lateral motion. Are the abrasion facets
on the teeth close to the restoration
area providing guidance now?
®
®
C|7
S YEST THEOMD C O M P O N E N T S
M
The Artex facebow – the better way to obtain an anatomically correct
registration of the patient’s cranium/axis relationship
®
1
2
Preparation of the facebow: The
nasion bar is secured in a rear position. Joint support inserted with
its vertical position fixed by a wing
screw
5
6
Move the Artex facebow close to
the patient‘s face
®
9
Move the joint support up to the
bite fork and tighten the wing screw,
thus securing the position of the
upper jaw
C|8
Prepare the bite fork in a
double-boiler
Introduce the ear tips into the external auditory meatus while sliding the
sides of the facebow together and
fix them in position by tightening the
locking screw
10
It takes only 2 minutes to apply the
facebow
3
Introduce the bite fork into
the patient’s mouth
7
Place the nasion adapter on the glabella by applying gentle thumb pressure till the marker on the nasion bar
is reached. Patient is lying down
11
Remove the facebow and detach the
joint support together with the bite
fork registration
4
Position the bite fork at the dental
arch of the upper jaw
8
Fix the nasion bar by tightening the
screw on the bar with your free hand
12
Fix the bite fork registration on a
plaster bed on the transfer table for
safe transport of the secured upper
jaw position to the dental lab
S YEST THEOMD C O M P O N E N T S
M
Sidestep Splitex Calibration
®
1
2
Remove model plates, magnets and
magnet holders from the upper and
lower parts of the Artex articulator
®
3
Replace the magnet holders by the
mounting plates and secure them
with screws in the upper and lower
parts of the Artex articulator
4
Screw down the Splitex TOP plate
on the upper part of the Artex articulator
®
®
Insert the Splitex magnet holder and
magnet into the TOP plate
®
®
5
6
Insulate the carbon surface in the
area of the adhesive plate by applying a thin layer of petroleum jelly
9
7
Screw down the adhesive plate onto
the lower part of the Artex articulator
®
10
Apply two strands of glue near the
center of the Splitex plate
®
8
Place the Artex articulator upside
down and put Splitex key in place
®
®
11
Close the Artex articulator and let
the glue dry
®
Put Splitex mandibular adjustment
plate on top of the key
®
12
Calibrate further Artex articulators
using the Splitex key for metric
commonality
®
®
Models can be transferred from one
calibrated Artex articulator to the
next as every dental technician and
every dentist has his or her own
Artex articulator
®
®
C|9
C | 10
ARTIC
LATIO
SYSTEM COMPONENTS
artex
C | 12
®
ceramill artex
C | 19
splitex
C | 20
artex incisal guidance
C | 21
artex facebow
C | 22
®
®
®
®
C | 11
S Y S T E M DC OE SMCPROI NP ET NI OT NS
artex system
®
Artex system – the perfect communication
between dentist, dental technician and the patient
®
For maximum accuracy of fit for well-functioning dentures, working with an articulator is essential. The specific challen­­ges are to record the patient’s jaw position quickly
and reliably, and to transfer this information precisely and as simply as possible
between the dentist and the dental technician.
Artex is renowned worldwide as being fully functional and reliable, and for dentists
and dental technicians alike it is an effective aid in recording static jaw relationships
and simula­ting jaw movements. The system‘s modular design means that it can be
used for specific requirements, thereby offering maximum flexibility.
®
The Artex system:
For the best possible link-up between dentist and dental technician. For the
ultimate in reliability and accuracy. For perfect service to the patient.
®
C | 12
S Y S T E M DC OE SMCPROI NP ET NI OT NS
artex system
®
Artex facebows and articulators, the better way to ensure correct
static and dynamic occlusion of dental prostheses
®
Quick, safe, efficient, simple and low-cost: obtaining
and communicating patient data using Artex .
®
The Artex facebow, transfer stand and articulator form a complete data communication system. The dentist uses the Artex
facebow to determine the patient’s maxillary position in relation to
the cranial axes. This important anatomical information is
obtained quickly, precisely and efficiently and secured safely on
the transfer stand for its transport from the dentist’s office to the
dental laboratory. There, the models are placed in an Artex articulator serving as a virtual patient.
®
®
®
This simple and highly efficient transfer of the facebow
registration using the Artex articulator allows work to be continued as if at chairside, significantly reducing the time
for corrections in terms of occlusal contouring.
®
Artex articulators – effective, precise, stable and
sensitive movement simulators.
®
Produced by the dental technician in an articulator, a dental prosthesis must function without a problem for the patient. An articulator is a great way to emulate the patient‘s movements, saving
the dentist chairside time and the patient quite a bit of pain.
The reproducible centric relation ensures safe starting and end
positions of every jaw movement. The Artex articulator can discover, check and remove any defects smaller than 20 µm.
®
Lightweight, stable, ergonomic and very precise – the Artex articulator facilitates and accelerates work on the model. It is practice-oriented, reliable and competitively priced. For these reasons,
the Artex brand enjoys such a good reputation and its articulators are among the most popular world-wide. The Artex product
range employs a modular design and is focused on features that
are really necessary.
®
®
®
C | 13
S Y S T E M DC OE SMCPROI NP ET NI OT NS
artex system
®
Splitex system – for accurately
calibrating Artex articulators
®
®
Accurate calibration of the Artex articulators
using Splitex
®
®
Calibrated articulators facilitate model transport from the practice
to the laboratory: the work produced and checked for function
in the articulator at the dental lab will work just as well with a
perfect receptor fit in the patient’s mouth.
Every dental technician and dentist will have his or her own calibrated articulator. This will save costs of delivery and prevents
articulator damage, thus enhancing economic efficiency.
The high precision of the Artex articulators ensuring a perfect
receptor fit in the patient’s mouth has been impressively
confirmed by a scientific study conducted at Tuft’s University,
Boston, MA, USA.
®
20
0
-20
-40
-60
The size of the gap
between left molar and
premolar, frontal view.
Kavo
Artex
Whip-Mix
Scientifically tested precision:
all 4 Artex articulators (classic-version) have smaller dimensional deviations than
comparable competitors
Source: „Determining the accuracy of articulator interchangeability and hinge axis reproducibility“,
Panayiota Hatzi (DDS, MS), Philip Millstein (DMD, MS), Alvaro Maya (DMD, MSD) – School of Dental
Medicine, Tufts University, Boston, Mass.
Publishing: J Prosthet Dent 2001, 85:236-45
C | 14
S Y S T E M DC OE SMCPROI NP ET NI OT NS
artex system
®
The high-performance, precise and transferable
system for simulating jaw movement
Artex Facebow
Artex Articulators
®
®
Splitex -keys
Artex Transfer Stand
®
Artex Transfer Table
®
®
SYS T E M C O M P O N E N T S
YOU R + P OI N TS AT A G LA N C E
+ Full system
_Transfer chain from facebow to articulator
_Fast and reliable transfer of patient data between dental practice and laboratory
+ System compatible
_Well thought out graduation of articulator types
_System entry can be matched consistently to the profile of requirements
+ Modular
_Intelligent, modular design of the entire Artex system
_Can be used for all indications
®
+ Precise
_High-precision manufacturing in resistant materials ensures the lowest tolerances
and highest quality standards for day-to-day use
+ Proven
_System renowned and successful world-wide
_Built on the experience of 25 years in articulator construction
C | 15
SYSTEM COMPONENTS
artex articulators
®
The basic principles of all Artex Articulators
_Integrated magnetic model plate system
_Adjust design for high-precision receptor fit
_Lower part of articulator designs CN, CT, CT and CR made of
carbon:
- makes for lightweight, strong and ergonomic design and
easy handling
- 3 positions, no tipping over
_Overall height, internally: 126 mm – large working area
offering a lot of space for mounting models
_Reliably reproducible centric relation for the starting and end
positions of every movement, checking position for static
occlusion
_Bonwill triangle with 110 mm side length, made up of the
intercondylar distance and the incisal point
_Average-value marking of the occlusal surface plane
_Adjustable scaled anterior guidance pin (-5 mm to +10 mm)
_Support pin for upper part of the Artex articulator flipped back
®
_Calibration using Splitex
®
All Artex articulators at one sight
®
Technical Data Chart
Non Arcon-Design
Artex CN
Artex CT
Artex CP
Artex CR
SCI
(Sagittal condylar inclination)
35°
35°
-15° to +60°
-20° to +60°
-20° to +60°
Bennett-angle (HCI)
15°
0° to +20°
0° to +20°
-5° to +30°
-5° to +30°
Protrusion
–
–
–
–
0 to 6 mm
Retrusion
–
–
–
–
0 to 2 mm
–
–
–
–
0 to 1,5 mm
(per side)
–
–
–
0 to 3 mm
0 to 3 mm
Centric click
Centric click
Centric click
Centric lever for
semi-axes
Centric lever for
semi-axes
Upper and lower articulator
arms prevented from coming
apart inadvertently in open
centric by:
Centric plate
Centric plate
Centric plate
Arcon-Clip
Arcon-Clip
Arbitrary pins for direct transfer with Artex facebow
no
no
yes
yes
yes
ISS (Immediate Sideshift)
Distraction
Centric design
C | 16
Arcon-Design
Artex BN
®
®
®
®
®
SYSTEM COMPONENTS
artex articulators
®
in Non-Arcon design
_Safe and easy handling due to positively driven condyle balls
_The anatomy is upside-down. The condyle ball is on the upper part, the condyle guidance plane is in the lower part of the articulator
_The upper and lower parts of the non-arcon articulator are in unison, even in an open centric position
artex bn
®
The Artex base model - the economic entry to
the Artex world of articulators
®
®
_Non-Arcon design centric articulator
_The same basic concept as all Artex articulators
®
_Precise functional parts made of aluminium and stainless steel
_Fixed condyle with 19mm track radius
_Fixed average condyle track inclination at 35°
_Fixed Bennett angle at 15°
_Upgradable and compatible with higher end Artex articulators
artex cn
®
The non-Arcon carbon base model - the bestselling
Carbon-Artex – the entry to the world of Artex -Carbon
®
®
_Artex -Carbon - lightweight, robust, ergonomic
and highly precise
®
_Simple and pleasant handling
_3 working positions, no tipping over
_“Click” - centric quick lock
_Fixed average condyle track inclination at 35°
_Bennett angle adjustable from 0 to 20°
artex ct
®
The non-Arcon workhorse –
the prosthetic articulator
_Partially adjustable non-Arcon articulator
_Artex -Carbon - lightweight and robust, providing
perfect handling
®
_Adjustable inclination of the condyle track inclination
from -15° to 60°
_Bennett angle adjustable from 0 to 20°
_“Click” - centric quick lock
_Arbitrary pins for face bow adaptation
C | 17
SYSTEM COMPONENTS
artex articulators
®
in Arcon design
_As found in natural anatomy: The condyle ball is on the lower part, the condyle guidance plane is on the upper part of the articulator.
_Adjustment of the condyle guidance elements is possible using an individual position registration.
artex cp
®
The Arcon base device
_Partially adjustable Arcon articulator with super smooth
condyle track guide
_Artex -Carbon - lightweight and robust, providing perfect
handling
®
_3 working positions, no tipping over
_High-precision and robust centric quick lock via mechanically
guided semi axis
_Arbitrary pins for direct transfer with the Artex facebow
®
_Adjustable inclination of the condyle track inclination
from -20° to +60°
_Distraction permitting release of compressed mandibular joints
from 0 to 3 mm
_Arcon clip prevents separation of upper and lower articulator
parts while centric is open
_Bennett angle adjustable from -5° to +30°
artex cr
®
Model management articulator and universal
diagnosis and therapy device
_Provides comprehensive adjustment possibilities to reproduce
the patient’s clearance and movement dynamics
_True masticatory simulator for practice and laboratory
_Fully adjustable Artex Carbon articulator offering the following
additional functions:
®
_Variable sideshift function for transversal clearance, adjustable
from 0 to 1.5 mm (for each side)
_Variable protrusion, adjustable from 0 to 6 mm
_Variable retrusion, adjustable from 0 to 2 mm
_Distraction permitting release of compressed mandibular joints
from 0 to 3 mm
_Ideal for model analysis, splint manufacture and correction
_Artex -Carbon - lightweight and robust, providing perfect
handling, also combining all the Artex CP advantages
®
®
_Adjustable inclination of the condyle track inclination
from -20° to +60°
_Bennett angle adjustable from -5° to +30°
C | 18
SYSTEM COMPONENTS
ceramill artex
®
Virtual Artex CR as Upgrade for Ceramill Map400 and Ceramill Mind.
The functional interface between manual and digital prosthetic dentistry
®
With manual production of
dental prosthesis working with
the articulator is standard for
dental laboratories. In order
to achieve the same quality of
the works virtually, it is only
logical and consistent to enable
this by means of a CAD-CAM
system. The virtual articulator
“Ceramill Artex” serves as a
bridge between manual and
digital techniques:
The model pair in the Artex
articulator is transfered to the
Map400-scanner while holding
the same Artex mode by means
of the Ceramill transferkit; it is
subsequently scanned-in in the
appropriate proportion.
The movement options of the
Artex CR are thus synchronised digitally and manually.
Interfering structures can
already be removed, reducing
time-consuming grinding in at
the chairside to a minimum.
®
_ Fully visualised Artex CR for a quick introduction to the digital world
®
_ The virtual articulator offers the same functional scope as compared to the real Artex CR
(Adjustment modes of the horizontal inclination of condylar guidance
(Bennett Angle; Retrusion; Immediate Side Shift)
®
_ The transfer of the models by means of the Ceramill Fixator ensures the precision
at the functional interface between manual and digital techniques
_ The calculation of the fully anatomical construction is dynamic and static under
consideration of the antagonists and the adjusted values of the articulator
_ Space for the porcelain built-up is automatically foreseen during the construction –
thus an optimal framework basis is established for veneers with high stability and a
consistent layer thickness
INFO
All information about the
virtual articulator is available in
our „Digital Lab Equipment“.
QR-Code
Models in the real Artex CR
Models in the Ceramill Fixator as a
transfer interface in the Ceramill
Map400
Adjustment modes at the virtual
Artex CR
®
C | 19
SYSTEM COMPONENTS
splitex calibration
®
Scientifically proven: Artex Articulators can be calibrated
to a standardization with tolerances < 10 μm
®
Using the Splitex Key and
Splitex Plate Set, all Artex
Articulators are calibrated similarly. This magnetic plate system serves as a metrical aid to
calibrate different articulators.
The precision of calibration is
such that deviations are
brought down to below 10 μm.
This means that models can be
mounted and changed with
precision on any calibrated
Artex .
®
®
®
®
Additionally, the ability to calibrate the Artex Articulators
simplifies the process of transferring the model from the
practice to the laboratory.
Where both parties have a cali­
brated articulator, then only the
models need to be transported,
and not the com­plete articulator. Not only does this protect
the articulator against handling
problems, it also saves on postal charges.
®
_Scientifically proven: Artex Articulators can be calibrated to a standardization
with tolerances < 10 μm
®
_Saves articulators and increases their profitability
_Every dental technician and dentist has his/her “own” articulator
_Simplifies dispatch (only the model) and increases the information flow
_Splitex Counter plates prevent the risk of poor fit caused by plaster expansion
and guarantee quick, precise adaptation to Splitex metal plates
®
®
Splitex -keys
®
C | 20
Splitex counter-plates in black
or white
®
Splitex plate set for the
carbon version
®
SYSTEM COMPONENTS
artex incisal guidance
®
Protects the posterior teeth and
ensures anterior tooth function
It is necessary to reproduce the
incisal-canine guidance to
ensure that there is no overloading or incorrect loading in
the posterior region caused by
restoration of anterior teeth.
Customised incisal guidance is
used for the fabrication of
functional anterior restorations, because correct anterior
tooth function is essential to
ensure a durable posterior restoration and conservation of
the remaining posterior teeth.
The incisal-canine guidance can
be determined using the diagnostic models before grinding
the teeth and transferred to
settings of the customised
incisal guidance unit.
The customised incisal guidance in the Artex® articulator
is used in the same way both in
the manual and digital technique. The customised incisal
tooth guidance is also a component of the Ceramill Artex virtual articulator.
®
_Reproduces the incisal guidance of the patient
_Used for copying or adjusting an existing incisal guidance
_Correct anterior tooth function protects a posterior restoration against overloading
_Avoids ceramic fractures due to overloading
_Also practical for setting up guidance with posterior restorations
_Avoids excessive grinding
_Component of the Ceramill Artex virtual articulator
®
Setting the customised incisal-canine
guidance with diagnostic models - the
posterior teeth disocclude
Prepared anterior with applied
customised incisal-canine guidance
Customised incisal guidance table in
the Ceramill Artex . The virtual and
analogue techniques are identical
®
C | 21
SYSTEM COMPONENTS
artex facebow
®
Anatomically correct fixation of the
cranial-axis relationship in just 2 minutes
The Artex Facebow is not just
a success on account of its
ease of handling, but also
makes it possible to work rapidly and economically: in just two
minu­tes, the cranium/axis relation is determined in correspondence to the patient’s anatomy.
®
In functional diagnostics and
treatment, it is an indispensable
tool which considerably reduces grinding time at chairside.
Artex facebow
®
_Cranium/axis relation determined in corresponding to the patient‘s anatomy
in just two minutes
_Quick and secure the 3-D universal joint
_Cranium-axis oriented transfer of maxillary model to the articulator transfers
the real jaw position precisely to the articulator and consequently reduces
grinding time at the chairside
_Reliable reproducibility of arbitrary axis position using cushioned Leipzig Nasion
Bite fork insertion
C | 22
Face bow attached to the patient
Removing joint support with bite fork
record from the face bow
MODE
FABRICATIO
SYSTEM COMPONENTS
giroform system
C | 24
giroform pin drill
C | 28
giroform baseplates
C | 29
®
®
®
C | 23
S Y S T E M DC OE SMCPROI NP ET NI OT NS
giroform system
®
The Giroform system outsmarts the plaster
expansion and is simple, fast and precise
®
The fitting accuracy of dental prostheses is largely dependent on the precision of the
models. Yet this is the very area in which the natural expansion of the plaster constitutes the greatest source of error. The effects of plaster expansion are evident in the
patient’s mouth in problems with the fit of prosthetic work, such as tension areas.
Giroform outsmarts the plaster expansion of the jaw segment, thus providing a true
model of the patient’s mouth.
®
The Giroform System provides dental technology with a perfect and high-precision
model making system on the market. By employing standardized and optimized
procedures Giroform guarantees permanent and reproducible quality.
®
®
Saves time, saves material.
Simple procedures and maximum precision.
C | 24
S Y S T E M DC OE SMCPROI NP ET NI OT NS
giroform system
®
Precise, simple
and fast
Undesirable plaster
expansion in making the
model
1
2
The patient’s original mouth
position.
How does Giroform solve
this challenge?
®
4
3
The tooth arch following plaster
expansion.
5
By superimposing the original
and the expanded tooth arch,
the deviation is clearly shown.
6
Defeat expansion
with Giroform = Eliminate tensions from prosthetic work
®
The pin positions are chosen
taking this cast into account.
By drilling the pin-holes, there
is secure and immovable
patient-analogous transfer
to the dimensionally-stable
Giroform Plate.
®
The pin-holes ensure that the
positional information is now
stored. The Giroform Base Plate
serves as a kind of memory stick.
®
The cast plaster tooth arch is
removed from the base plate
after 30 minutes – i.e. before the
onset of plaster expansion.
This allows the tooth arch to
expand freely. However, after this
it no longer matches the drilled
original information on the
Giroform Plate.
®
After sawing or separating the
tooth arch, the pins again fit into
the drill-holes.
The cut section serves as an
expansion joint to accommodate
the expansion, which is now
restricted to just the individual
segments, thus no longer causing distortion of the tooth arch.
The segmented model therefore
offers a precision basis for perfectly-fitting work.
C | 25
S Y S T E M DC OE SMCPROI NP ET NI OT NS
giroform system
®
The system which
saves double the time
The system that
saves time and material
Comparing Giroform® model (100 % cost)
with other models
Double time saving
Minutes
220 %
58,0
60
200 %
180 %
50
Retention disc/
metal plate
40
Adhesive
31,5
50
30
20
Waiting time
Working time
25
Pins (14 pcs)/pins
with sleeve (14 pcs)
0
8
6,5
®
Giroform model
Classic model
with pin & sleeve
system
_The actual time required to make the model is just 6 – 7 minutes
Base plate/base plaster
(150 g)
+98%
33%
18%
18%
43%
43%
115%
115%
21%
21%
140 %
120 %
100 %
Dental arch plaster
(65 g/90 g)
10
160 %
+131%
12%
80 %
31%
60 %
19%
40 %
38%
20 %
0%
®
Giroform model
with
retention
disc
Classic pin and
sleeve model
w/o
with
magnet and
magnet and
retention disc retention disc
_The base is manufactured
_The amount of plaster needed is reduced due to blocking out the
impression with Giroform putty
_The model can be worked on after only 40 minutes
_The metal disc is already fixed into the premium base plate
_Multiple use of base plates, secondary plates and metal discs
_Base plaster no longer required
_The base plate is cheaper than the base plaster
_No adhesives, guide sleeves or shell moulds required
C | 26
S Y S T E M DC OE SMCPROI NP ET NI OT NS
giroform system
®
Precision, economy, speed
Base plates
Giroform pin drill
Pins
®
Secondary plates
Duplication flask
Quadrant plates
Base collar
SYST E M CO M P O N E N TS
YOU R + P OI N TS AT A G LA N C E
+ Precise
_Plaster expansion eliminated thanks to individually drilled based plate
and segmentation of dental arch
_Segments reset in correctly drilled position free of expansion
+ Fast
_Model made in just six minutes
_ The base is ready with the base plate
+ Cost-effective
_Less plaster required for the dental arch, no plaster required for the base
_The entire base plate is less expensive than the corresponding amount of base plaster
_Base plates, secondary plates and metal discs suitable for multiple use
+ Universal
_Can be used for saw-cut master models, opposite models, two-part
models, anatomical casts, diagnostic models and partial impressions
+ Simple
_Simple procedures
_Entire system user-friendly with ergonomic design
C | 27
SYSTEM COMPONENTS
giroform pin drill
®
Perfectly formed, quality appearance,
unbeatable performance
The pin drill allows precise, fast
and safe determination of the
desired drill position.
Drilling starts at the press of a
button. The plate holder is fastened magnetically, securing
the drill position.
In order to guarantee pin friction, identical, smooth-faced
and regular holes are drilled
into the Giroform base plate.
The precise drill guide also enables uniform drilling depth.
These specific characteristics
of the Giroform pin drill guarantee precise, fast and cost-effective model manufacture.
®
®
_Fast and easy to use
_Laser beam for easy drill positioning
_Plate holder smoothly adjustable thus ensuring safe and fast operation
_Plate holder is secured magnetically and automatically when drilling starts
_Semi-automatic drilling at the press of a button (0.5 seconds per hole)
_Automatic drill advance guarantees identical boreholes in the plates
_Robust device providing many years of reliability
Strong, practical and aesthetic –
stainless steel housing
C | 28
Laser beam for easy drill
positioning
Plate holder is secured magnetically
and automatically when drilling starts
SYSTEM COMPONENTS
giroform baseplates
®
Limits the amount of work, base plaster,
sleeves and bases thus minimizing costs
Using the Giroform base plate
means that the model is
already half finished. The base
plate is expansion-resistant,
saves one working step and
prevents plaster expansion.
Saves working time (base plaster, sleeves and
moulds). Base plate ready-to-use and available in
three sizes
• L for standard cases
• XL for exceptionally large arches
• Quadrant for sectional impressions
Prior to using the plaster, the
pinhole is set into the base
plate, recording the position of
the individual segment.
The flat surface of the base
plate enables simple control of
the segment position via an
easily recognizable light gap.
Cost-effectiveness is further
increased by the possibility to
re-use the base plate and the
retention disc.
three drill holes for pin fixing
if working without a metal disc
quadrant
quadrant
X- Xla r la r
ge ge
The high-precision homogenous plate material provides
for smooth drill holes and guarantees precise pin guidance.
Multiple-use of premium plates for
opposite models and classic plates
large
Split cast checked
for scientifically
verified geometry
large
Cost savings
triangular split cast
with wedge tapering
to centre
low-priced reusable metal
discs for classic base plates
Screw fitting no longer
required saving time
premium base plates
incl. metal discs
_Using the Giroform base plate means that the model is already half finished.
_Inherently stable base plate instead of the risk of secondary plaster expansion
due to base plaster
_Plate material and the plate strength provide for precise pin guidance
_Only minimal amounts of dental arch plaster required
_Metal disk and screw are re-usable, instead of using expensive special M8 screws
_Flat base plate surface enables individual segment monitoring at a glance
_Inclined rear surface facilitates insertion in the plate holder and model removal from
the articulator
_Base plate can be re-used for opposing model.
Individual segments checked at a
glance. Plane surface of the base
plate
Multiple use of used, drilled base
plates for opposite models and the
fixed metal discs as retention discs
for anatomical casts. Reusable base
plate and metal plate
Slanting facilitates insertion in drill
plate holder and removal from articulator – inclined plane on rear of plate
C | 29
SYSTEM COMPONENTS
giroform
®
Precision, cost-effectiveness and speed
_A combination of carefully matched system components ensures the success of the final product
_The following system components play an important part in saving time and plaster while providing a high degree of accuracy
giroform secondary plate
®
Stability and comfort
_Split cast check enables passive (non-magnetic) precision
fit to the base plate
_The balanced magnetic force and high material strength
prevent deformation
_The retention pattern on the rear has been optimized to provide
excellent grip for the plaster during insertion in the articulator
but also its easy removal after use
giroform quadrant plate
®
Straightforward and versatile
_The standardized plate size is ideally suited to partial
impressions - both left or right quadrant casts. No more
trimming or grinding required
_Drill holes for pins can be positioned at underside and will thereby
facilitating insertion, casting and removal from the articulator
_The Vertex adapter enables direct connection to Vertex
articulators
®
®
_Also adaptable with the Orbix system with minor alteration
giroform pins
®
Precise and economically priced
_Precision brass pin
_With smooth finish on tapered section for accurate fit
in base plate hole
_With active retention area for perfect grip in dental arch plaster
_Reasonably priced
C | 30
SYSTEM COMPONENTS
giroform putty
®
Economic and re-usable
_Permanently applicable soft silicone putty for placing
and blocking out the cast on the impression tray.
_Saves time with rapid blocking-out
_Saves plaster and therefore increases the cost-effectiveness
_No subsequent trimming or grinding required
_Reusable
giroform dublication flask
®
Versatile and durable
_Universal solution for individual refractory dies, several
segments or entire dental arch
_Ceramic firing pins allow duplicate casts to be made with
refractory investment
_Saves refractory investment and duplicating silicone by
reducing duplication area
_The extension of the labial area also allows duplication of
protrusive anterior teeth
giroform base collar
®
Clever and functional
_The vestibular extension allows incorporation of mucobuccal
folds and soft tissue on partial prostheses or full dentures
_Used Giroform Base Plates which have already been drilled
can be used to make master casts
®
C | 31
C | 32
DOSIN
MIXIN
SYSTEM COMPONENTS
smartbox X2
C | 34
smartmix X2
C | 35
alpenrock
C | 36
®
artifix
C | 37
Stones
C | 38
steamer X3
C | 39
C | 33
DS YO SS TI NE GM |C OM MI XPI ON NG E N T S
smartbox X2
The most homogenous plaster
dispensing method yet
Weighing and mixing plaster
and water by hand is too imprecise and time-consum­ing by the
high standards of the dental
laboratory. Aside from ensuring
a consistent high degree of
dosage precision, the Smartbox
is easy to operate and pays for
itself within a few months.
Using the new dosage technology, the plaster is sprinkled
very finely into the mixing
beaker, which noticeably
increases the homogeneity of
the mixture
_Time, material and plaster savings of 20 to 25%
_Finely sprinkled plaster using the new patented plaster dosage technology
_Multifunctional turn/ push button for simple and quick programming and programme selection
_Easy operation – error-free working for everyone
_Reproducible mixing ratio at the push of a button, accurate to within a gram
_Integrated scales automatically measure the dosage or for manual weighing
_Enables clean and dust free operation
Easy to fill the silo at
the machine
C | 34
One switch for everything –
multi-functional dial / button
Fine plaster curtain due to
new dosage technology
DS YO SS TI NE GM |C OM MI XPI ON NG E N T S
smartmix X2
Perfect mixture results thanks to patented mixing blade geometry
and amazingly simple operating concept
The universal and future-proof
vacuum-mixing machine with
the amazingly simple operating
concept.
When processing homogenous
plaster, investment material or
paste silicon and impression
material, the Smartmix vacuum-mixing machine is an indispensable and productive piece
of equipment.
_Multi-functional dial / button for quick and easy programme selection and programming
_Homogeneous, consistent mixing quality
_Consistent, reproducible mixtures with optimal parameter
_Quick access to all mixing parameter: Mixing duration, speed, direction of rotation,
interval times, pre-mixing, pre-vacuum, post-vacuum and program name
_Space saving design
_Meets the requirements of modern high-performance plasters and embedding masses
_Less re-work required due to consistent mixing results
_The universal and future-proof, vacuum mixing machine
_Beaker with mixing blade 500 ml included
Smartmix mixing beaker
The patented mixing blade
geometry of the Smartmix mixing beaker ensures optimal mixing results in all areas of application. By means of both horizontal and vertical revolution of the
materials to be mixed, perfect
homogeneity of mixture results
is achieved
Rounded beaker base for
easy cleaning
Patented mixing apparatus
geometry, mixing speed up to
550 U/min
Post-vacuum-function
C | 35
DS YO SS TI NE GM |C OM MI XPI ON NG E N T S
alpenrock
The new generation of super-hard plaster
with optimal processing properties
This new generation of class-4
super-hard plaster is highly suitable for the manufacturing of
tooth arches, single stumps and
control models. Proces­sing and
expansion properties perfectly
match Giroform model production processes.
®
gold
pastel
saffron
_Expansion properties (hardening expansion of only 0.08%)
perfectly match Giroform model production
_Splinter-free processing and high pressure-resistance
_Easy pouring due to shaker effect
_Stable without shaker effect (thyxotrop)
_Comfortable processing through snap-set
_Extremely long 7-minute processing period
_Rapid completion of hardening after 12 minutes
_Rapid final hardness after 35 minutes
C
_Possible to scan, e.g. for strip light scanners such as the Ceramill Map
A
D/C M
A
E
S U I TA B L
Three colors: pastel,
saffron, gold (see illustration above)
C | 36
4kg bag – economical
storage-stable package size
Easy to handle
DS YO SS TI NE GM |C OM MI XPI ON NG E N T S
artifix
®
White synthetic articulation plaster
of outstanding consistency
White synthetic articulation
plaster with minimal expan­sion.
This plaster can be mixed both
manually and mechanically, and
can be applied for a broad
spectrum of indications: articulating working models, padding
KFO models, fixing the milling
base, bite registration as well
as for pre-casts.
_Quick wetting, no lumping, creamy consistency
_Fast setting
_Extremely low setting expansion of 0.03 %!
Serves to fasten the bite fork to the
transfer table
Creamy texture for smooth articulation. Load-free articulation
Sets rapidly
C | 37
DS YO SS TI NE GM |C OM MI XPI ON NG E N T S
Stones
All Stones at one sight
Technical/physical
data:
Plaster for
sectioned and
master models
Application
Product
C
Alpenrock
High-strength
dental stone
Base plaster
hard
Base plaster
liquid
Girobase
Base plaster
Girobase
Base plaster
A
D/C M
A
Plaster for
sectioned and
master models
Plaster for
full denture
prosthetics
High-strength
dental stone
High-strength
dental stone
Girostone
American
High-strength
dental stone
Girodur
Synthetic
Superstone
Artifix
Synthetic
plaster
Giroplast
Synthetic
High-strength
dental stone
®
®
E
S U I TA B L
Class
4
4
4
4
4
3
3
Color
gold, pastell,
saffron
white
blue
rosé,
pastell,
yellow
white
white
green,
blue
white
100 : 20
100 : 25
100 :
23-25
100 : 22
100 : 23
100 : 30
100 : 30
Sprinkling time (s)
15
15
15
15
15
15
15
Soaking time (s)
30
30
30
30
30
30
30
Mixing time in vacuum (s)
30
30
30
40
30
30
30
Working time (min)
7
2
5
4
5
3
4
Setting time (min)
12
4-6
10
7
10
4
10
Remove from the
impression (min)
35
30-45
45
45
25
–
30-45
0,08
0,05
0,07
0,06
0,08
0,11
0,10
0,03
< 0,20
Mixing ratio (Powder : Water)
Linear setting expansion
after 2 h
after 24 h
Compression strength EN
26873 (MPa)
59
< 30
< 50
60
< 50
20
30
Hardness (MPa)
262
120
150
180
< 150
50
80
12
7
5
Bending tensile strength (MPa)
Content (kg)
Order no.
C | 38
12
20 (5x4)
20
20
20
20
20
20
711110
711120
711130
711240
711250
711021
711022
711023
711105
711217
711040
711050
711060
CS YL ES AT ENMI N CG O M P O N E N T S
steamer X3
State-of-the-art technology and a professional appearance – with Steamer X3, you
have a functional and productive auxiliary tool at your disposal in the laboratory
Steamer X3 has all the features
that are really needed in everyday laboratory procedures. By
focusing on the basics, it guarantees maximum reliability and
longevity and thereby enables
greatest productivity.
_Large capacity tank – 3.7 litres
_High-end components offer maximum reliability and productivity
_Clear function display, e.g. the minimum water quantity
_Rust-proof tank provides extended lifespan
_Smooth, rounded surfaces for easy cleaning
_Drain valve positioned at the very bottom guarantees complete rinsing
of limescale deposits in the tank.
_Floor mounted or wall mounted
Steamer X3 is filled without
funnel
The ergonomic hand piece is
always within reach
Sealing lid without vulnerable
pressure control valve
C | 39
C | 40
MILLIN
CASTIN
SYSTEM COMPONENTS
ceramill multi-x
C | 42
ceramill therm
C | 43
ceramill zi
C | 44
ceramill zolid
C | 45
Legierungen
C | 51
noflame plus
C | 56
smartwax duo
C | 57
af350
C | 58
ap100
C | 59
®
C | 41
SYSTEM COMPONENTS
ceramill multi-x
The zirconium oxide winner for
a wide range of indications
Vertical milling using the
pantograph with unlimited
movement, the spherical shells
make the Multi-x an indication
champion for zirconium oxide.
Completely new indications
that have currently only been
possible in metal.
Easy processing of undercuts by
tilting the spherical shell table
_Vertical pantograph – even and smooth surfaces also possible in vertical surfaces
_Quick and easy to determine the angle of insertion with the moveable
spherical shell tables
_The vacuum held spherical shell tables and thus the fixing of the milling position
may be activated through the foot pedal
_Maximum workflow
A easy and highly precise setting of
the enlargement factor is feasible by
making use of the micrometer screw
_Variable and precise setting of the enlargement factor using the micrometer screw
_Working table fixture for quick blank insertion
_Clean processing of the zirconium blank using integrated blast and
extraction equipment
The effect of the enlargement factor
Crown = female part | Stump = male part
Reduced factor
= wider fit
C | 42
Factor Original factor
= ideal fit
Inlay = male part | Stump = female part
Enlarged factor
= tighter fit
Reduced factor
= tighter fit
Original factor
= ideal fit
Enlarged factor
= wider fit
SYSTEM COMPONENTS
ceramill therm
A fully automatic, high performance furnace
for the final sintering of stress-free frameworks
The Ceramill Therm is a high
temperature furnace with additional features.
The milled Ceramill zirconium-oxide frameworks are
dense-sintered with the
Ceramill Therm and thus obtain
their final density and the
resulting excellent material
properties. For sintering, the
objects are placed onto sintering beads, which ensures a frictionless sintering process and
thus distortion-free frameworks. The Ceramill Therm
offers maximum process reliability due to constant temperature control, even temperature
distribution in the firing chamber and notification in case of
termination of the sintering
programme due to e.g. power
failure. As a result of this, the
user is able to safely control if
the final density and thus
strength of the frameworks has
been achieved.
The user has 4 sintering programme locations at his
disposal; one of them can be
individually programmed.
_Maximum process reliability due to constant temperature control, even temperature
distribution in the firing chamber and notification in case of termination of the sintering programme
_Maximum process reliability due to optimally coordinated, fully-automated sintering
programmes for different restoration sizes
_4 sintering programme locations; one of them individually programmable by the user
_2 stackable sintering bowls for maximum utilisation of the furnace
_Minimum required space and installation time (supply required)
For maximum utilisation of the
furnace, the Ceramill Therm
exhibits a large firing chamber,
in which 2 sintering bowls can
be stacked on each other and
thus the double amount of
frameworks can be sintered in
one cycle. With the aid of the
sinter forceps, the sinter shell
can be transferred easily and
safely in and out of the furnace.
C | 43
SYSTEM COMPONENTS
ceramill zi
Presintered Y-TZP zirconium-oxide blanks for machining
without risk of splintering or damaged edges
Ceramill zirconia blanks
already undergo strict test
procedures according to fixed
parameters during the
manufacturing process in our
in-house production facility.
In this way Amann Girrbach
ensures the permanent
high-quality standard of its
in-house production.
The pre-sintered blanks can be
perfectly machined – they do
not splinter and offer excellent
edge stability. All blanks are
marked in batches with their
individual enlargement factors,
which are later transferred to
the milling unit Ceramill.
The blanks are secured in a
special plastic frame, which, by
simply clicking into place, can
be instantly inserted into the
fixture within the working table.
Thus, the real work can be
started without time-consuming preparation.
_High-grade certified raw material
_Extremely high bending strength, optimal edge stability and machinability
_Due to their reusability, the blanks can be used efficiently so that unmachined
areas can be processed later
_Extremely wide range of indications due to different blank sizes
_Optimal fitting due to encoded indication of the enlargement factor on the blanks
TOSOH Powder
_Individual coloring due to 4 different degrees of brightness of the Ceramill Liquid
dying solutions
All Biaxial Pressed
_Can be used with all usual zircon veneering ceramics
1,300 MPa Strength
FDA & Health Canada Approved
IdentCERAM Stickers
4-point bending strength
(63,21%) [MPa]
Weibull modul m
(University hospital Munich,
Dr. Beuer et al.)
1400
1
3
6
10
15
4
7
11
16
1200
1155
1050
10
10,7
20
5
400
500
200
0
0
Ceramill
ZI
Possible unit per Ceramill Motion
blank
1000
7,2
0
C | 44
11,8
600
14
19
1500
14,2
1100
800
9
13
18
15
1279
1000
5
8
12
17
1200
2
4-point bending strength
A
B
C
Competitor
At approx. 1300 Mpa flexural
strength, Ceramill ZI lies in direct
competition with the leading specialists
D
Ceramill
ZI
A
B
C
Non-coloured
Coloured
Competitor
eramill ZI has an excellent Weibull-modulus of 14.2 and therefore
proves a high degree of reliability
during use
Flexural strength of Ceramill ZI
non-coloured and coloured with
Ceramill liquid;
Amann Girrbach, 2009
SYSTEM COMPONENTS
ceramill zolid
Aesthetics and reliability without compromise.
THE digital system solution for monolithic zirconia restorations.
Permanently stable, non-veneered and aesthetic, ideally
suited for all-zirconia crowns
and bridges. This is the easiest
way to describe the new, material-optimised translucent zircon
oxide from Amann Girrbach.
This newly developed zircon
oxide makes it possible for the
first time to produce the
required translucent results
without increased sintering
temperatures, which damage
the properties of the material.
By maintaining the material-specific standard sintering
temperature (1,450 C°) excessive grain growth is prevented,
which guarantees the permanent stability of the finished
restoration.
Light transmission
Ceramill Zi
Ceramill Zolid
_Fabricate fully anatomical zirconia restorations highly efficiently in your laboratory
_Non-veneered, without the risk of chipping and easily fabricated
_Optimum translucency and light refraction
_Sinter temperature analogous to Ceramill Zi
_Flexural strength similar to Ceramill Zi
TOSOH Powder
All Biaxial Pressed
1,200 MPa Strength
FDA Approved
IdentCERAM Stickers
Opacity [%]
1600
74
72
1415
1400
72,82
1236
1200
70
1012
1000
68
800
66
600
64
64,71
62
400
200
0
60
ZI
Ceramill Stain & Glaze materials are
designed so that staining and glazing can be completed in one working stage
Biegefestigkeit Weibull [MPa]
Zolid
Comparison of Ceramill Zolid with
Ceramill ZI
(Source: Amann Girrbach R&D)
3-point
DIN EN
843-1
Test method
4-point
DIN EN
843-1
4-point
ISO
13356
Ceramill Zolid flexural strength
up to 1500 MPA
(Source: Amann Girrbach R&D)
C | 45
SYSTEM COMPONENTS
ceramill zi – for Multi-x
Optimum area utilization
compared to
With the Ceramill ZI Blank Preforms, 31, 51, 71 and 77 from Amann Girrbach, the actual blank surface area is also the effective working
area. This is due to the holding frame, which allows the framework to be milled up to the outer most edge. The milling path can be outside the blank on all side, i.e. in the plastic frame.
Blank
Holding frame
Area utilization
Advantage
ceramill zi preforms
_The ideal blank for single
copings and abutments
_Available in 2 different sizes
1
2
_Single units can be processed
in half the time
ceramill zi 31
_The ideal blank for large
crowns and small bridges
1
2
3
ceramill zi 51 L
_The ideal blank for medium
sized to high bridges
1
2
3
4
5
6
7
8
9
10
ceramill zi 71 L
1
3
8
4
9
_Designed exactly according to
the course of the dental arch
2
5
6
7
10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26
27 28 29 30 31 32 33
_The ideal blank for large
spanned bridges
_Covers up to 90 % of all
work in a laboratory, with
no material wastage
ceramill zi 77 L/XL
1
4
3
8
9
2
5
10
6
11
7
12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 32 33 34
35 36 37 38 39 40
41 42 43
C | 46
_For all large spanned
bridges, which are too
wide or high for the ZI 71
SYSTEM COMPONENTS
ceramill roto
_Efficient, economically viable processing of Ceramill blanks,
with long working life and optimal milling geometry
High-precision, long-life sensing and
milling tools for cost-effective machining
of Ceramill blanks
Item no. Desc.
Geometry sketch
Ceramill Roto T4
760801
T4
Ceramill Roto T4
Ceramill Roto F4
T4
760701
F4
Ceramill Roto F4
Ceramill
Ceramill Roto
Roto T4
F4
Ceramill Roto T3
760831
T3
Ceramill Roto T4
T3
F4
Roto F3
Ceramill
T3
Ceramill Roto
Roto F3
T4
Ceramill
F4
760731
F3
Ceramill Roto
Roto F3
T4
T3
Ceramill
Ceramill
Ceramill Roto
Roto F4
T2
Ceramill
Roto F3
T2
Ceramill Roto
F4
T3
Ceramill Roto F2
T2
760821
T2
Ceramill
Roto F3
T3
F2
Ceramill Roto
T2
Ceramill Roto T3
F2
760721
F2
Ceramill
Ceramill Roto
Roto F3
T1,2
Ceramill
Roto F3
T2
T1,2
F2
Ceramill Roto
F1,2
Ceramill
Ceramill Roto
Roto T1,2
T2
Ceramill
Roto
F2
F1,2
Ceramill
Roto
T2
760811
T 1.2
Ceramill
Roto
T1,2
Ceramill
Roto
Ceramill Roto
Roto F1,2
F2
Ceramill
T0,9
Ceramill
T0,9
F2
Ceramill Roto
RotoF 1.2
T1,2
760711
F1,2
Ceramill Roto T0,9
Ceramill
Roto
T0,9
Ceramill Roto T1,2
F1,2
T0,9
Ceramill Roto T1,2
T0,9
Ceramill
Roto
Ceramill Roto F1,2
T0,6
760809
T 0.9
Ceramill Roto
Roto
T0,9
T0,6
Ceramill
F1,2
F0,6
Ceramill
Roto
T0,6
Ceramill Roto
Roto
T0,9
Ceramill
T0,9
760709
F 0.9
F0,6
Ceramill
Roto
T0,9
Ceramill
Roto
T0,6
Ceramill
Roto
Ceramill Roto
Roto F0,6
T0,9
Ceramill
CT2
Ceramill
Ceramill
Roto
T0,9
T0,6
Ceramill Roto
Roto CT2
F0,6
CF2
Ceramill Roto CT2
760851
T 0.6
Ceramill
CF2
Ceramill Roto
Roto T0,6
F0,6
CT2
Ceramill Roto T0,6
CF2
760751
F 0.6
Ceramill Roto
F0,6
Ceramill Roto
Roto F0,6
CT2
CF2
Ceramill
_Available in 1.2 mm, 2 mm and 3 mm sizes, and additional
special patterns
_Material removal and dust removal are optimally controlled
due to the tool geometry tailored to the material
_Extensive assortment of milling cutters for the management
of a wide range of indications
Area of application
Ceramill
Roto KT2,5
Tools with face
radius
for rapid, rough removal of
Ceramill Roto KT2,5
material (“roughing”).
Ceramill Roto KF2,5
KT2,5
Ceramill RotoCT 2
CT2
760840
Ceramill Roto KF2,5
Ceramill
KT2,5
Ceramill Roto
Roto
Ceramill
Roto KF2,5
KT 1.8
Ceramill Roto KT 1.8
Ceramill
Roto
KT2,5
KF2,5 for removing material to create the
Standard tools
(face radius)
Ceramill Roto KF
KT 1.8
Ceramill Roto
Roto KF
1.8
Ceramill
framework shape
machine
the rough outline.
Ceramill and
Roto KT2,5
KF2,5
Ceramill
Roto
1.8
ST2
KF 1.8
Ceramill Roto KT
KT2,5
ST2
Ceramill Roto KF2,5
Ceramill
Roto KT
Ceramill
SF2
ST21.8
Ceramill Roto
Roto KF
KF2,5
Standard tools
(face
radius)
for the machining of areas for which
Ceramill
Roto
SF2
Ceramill Roto KF
KT 1.8
1.8
Ceramill
Roto
ST2
SF2tools is too large and too the diameter of
the diameterCeramill
of theRoto
T/F3
ST1,2
Ceramill
Roto
KT
1.8
Ceramill
Roto
KF
1.8
ST1,2
Ceramill
Roto small,
ST2
SF2
the T/F1.2 tools
is too
e.g. deep front teeth crowns.
SF1,2
KF
1.8
Ceramill Roto ST1,2
Ceramill
SF1,2
Ceramill Roto
Roto ST2
SF2
ST1,2
Ceramill Roto ST2
SF1,2
ST0,6 for finishing of details, e.g. incisal/occlusal
Standard tools
(face
radius)
Ceramill
Roto
SF2
Ceramill Roto
Roto ST1,2
ST0,6
Ceramill
SF1,2
Ceramill
Roto SF2
areas and crown
edges.
Most of the crown and bridge works can be
SF0,6
Ceramill Roto ST0,6
Ceramill
Roto
SF0,6
Ceramill
Roto
SF1,2
rendered by means of ST1,2
this
tool.
ST0,6
Ceramill Roto ST1,2
SF0,6
Ceramill Roto UT2
SF1,2
Ceramill
Roto
UT2
Ceramill Roto
Roto SF1,2
ST0,6
SF0,6
Ceramill
UF2intricate geometries such as e.g. incisal
Tool with face
radius
Ceramill
Rotofor
UT2
UF2
Ceramill
Ceramill Roto
Roto ST0,6
SF0,6
areas in case
of
long
front
Ceramill Roto
Ceramill
Roto UT2
ST0,6
UF2 teeth crowns. Can also be used as oversize
Ceramill Roto SF0,6
UT3
or under-size
tool
in
combination
with the 1.2 or 0.6 tools.
UT3
Ceramill Roto
UF2
Ceramill
Roto UT2
SF0,6
Ceramill Roto UF3
UT3
Ceramill
Roto
UT2
UF3
Ceramill Roto UF2
Thin tool with
faceRoto
radius
Ceramill
UT2
UT3
Ceramill
Roto
UF3 for particularly intricate geometries, e.g.
Ceramill
Roto
UF2
Ceramill Roto
TT2
incisal surfaces
of Roto
longTT2
front teeth crowns, inlays, adhesive bridges,
Ceramill
UT3
Ceramill
Roto
UF2
UF3
TF2
Roto TT2
veneers andCeramill
the like.
Ceramill
UT3
Ceramill Roto TF2
UF3
Ceramill
UT3
Ceramill Roto
Roto TT2
TF2
Ceramill Roto UF3
Roto
TT2
TF2
UF3
2° -tapered Ceramill
tool for
machining
conical surfaces, e.g. conical crowns and
Ceramill RotoCF 2
CF2
760740
Ceramill
Roto
other conical
support
elements.
Ceramill
Roto TT2
TF2
760891
KT 2.5
Ceramill Roto
KT2,5
Ceramill Roto KT2,5
Ball tool for processing undercuts without having to
turn/tilt the work piece.
Ceramill
Ceramill Roto
Roto CT2
CF2
Ceramill Roto CF2
Ceramill Roto
KT2,5
KF2,5
760791
KF 2.5
Ceramill Roto
KF2,5
KT2,5
Ceramill
Ceramill Roto
Roto KT2,5
KF2,5
KT 1.8
Ceramill
KF2,5
Ceramill Roto
Roto KT2,5
KT 1.8
Ceramill Roto
KF2,5
760892
KT 1.8
Ceramill Roto
Roto KT
KF 1.8
Ceramill
Ceramill Roto KF2,5
KF
KT 1.8
KF 1.8
Ceramill Roto ST2
Ceramill Roto
Roto KT2,5
ST2
KT
KF 1.8
Ceramill
Ceramill Roto KF
ST21.8
Ceramill Roto SF2
SF2
KF
Ceramill Roto
Roto
KT2,5
ST21.8
760861
ST 2
Ceramill
KF2,5
Ceramill
Ceramill Roto
Roto ST2
SF2
Ceramill
Roto
KF2,5
ST2
SF2
ST1,2
760761
SF 2
ST1,2
Ceramill
Ceramill Roto
Roto KT
SF21.8
760792
KF 1.8
Ceramill Roto
KT 1.8
Ceramill Roto TT2
Ceramill Roto TF2
Ceramill Roto TF2
Fine ball tool for machining tubes and undercuts, without having to
turn/tilt the work piece.
Wools without face radius (shank-type tools) are employed for special
applications, e.g. implant techniques, bar construction and the like.
Ceramill
Roto
SF2
ST1,2
SF1,2
Ceramill Roto
Roto KF
KT
1.8
SF1,2
Ceramill
1.8
ST1,2
Ceramill
Roto
ST1,2
760871
ST 1.2
Ceramill
Ceramill Roto
Roto SF1,2
KF 1.8
ST1,2
Ceramill Roto ST2
SF1,2
ST0,6
Ceramill Roto ST0,6
Ceramill Roto
SF1,2
760771
SF 1.2
Ceramill Roto ST2
SF1,2
Ceramill Roto SF2
ST0,6
SF0,6
Ceramill Roto SF0,6
ST0,6
ST0,6
Ceramill
Ceramill Roto
Roto SF2
SF0,6
ST0,6
Ceramill
Roto
ST1,2
SF0,6
UT2
760881
ST 0.6
Ceramill
Ceramill Roto
Roto UT2
SF0,6
Ceramill
ST1,2
Roto
UT2
SF0,6
Ceramill SF 0.6
SF1,2
UF2
760781
Ceramill Roto UT2
UF2
Ceramill Roto
SF1,2
Roto UT2
UF2
UT2
UF2
Ceramill
Ceramill Roto
Roto ST0,6
UT3
Ceramill Roto
UT3
UF2
760830
UT 3
Ceramill Roto
Roto ST0,6
UF2
Ceramill
UT3
Ceramill Roto SF0,6
UF3
Ceramill Roto
UF3
UT3
760730
UF 3
Ceramill
UT3
Ceramill Roto
Roto SF0,6
UF3
Ceramill
Ceramill
Roto UT2
UT3
UF3
Ceramill Roto
Roto
TT2
Ceramill
Roto
TT2
Ceramill Roto UF3
Ceramill
Roto
UT2
Ceramill
UF2
760820
UT 2
Ceramill
UF3
Roto
TT2
Ceramill Roto
TF2
Ceramill Roto TF2
TT2
Ceramill
Roto
UF2
Ceramill
TT2
760720
UF 2
Ceramill Roto
Roto
TF2
Ceramill Roto UT3
TT2
TF2
Ceramill Roto TF2
Ceramill Roto
Roto UF3
UT3
Ceramill
TF2
Ceramill Roto UF3
Ceramill RotoTT2
TT2
760819
Ceramill Roto
RotoTF2
TT2
Ceramill
TF2
760719
Ceramill Roto TF2
Shank-type tools with a medium diameter for milling special geometries,
e.g. for implant techniques.
Thin shank-type milling cutter for particularly intricate geometries.
Conical tools with a diameter of 3 mm for machining sharp-edged undercuts and sharp edges in fine bores.
Conical tools with a diameter of 2 mm for machining sharp-edged
undercuts and sharp edges in fine bores.
T-shaped tools with a diameter of 2mm for grinding sharp edged,
right-angled undercuts and sharp edges within delicately drilled surfaces.
C | 47
SYSTEM COMPONENTS
ceramill teleskopkit
Precise friction planes of
the presintered blanks
By means of the Ceramill
Teleskopkit it is now possible to
fabricate telescope crowns with
the same precision as in metal.
The inverse milling technique
performed in the Ceramill
machine means milled telescope crowns do not have the
connector on the milled surface,
but instead on the occlusal surface. This means the friction
planes on telescope crowns are
already smooth and precise in
this pre-sintered state, which
reduces the amount of grinding
necessary with a water cooled
turbine in the finishing phase,
and therefore greatly reduces
danger of micro-cracking within
the material. With the small
cylindrical blank for single
units, this is a system that
saves material and at the same
time offers a high degree of
accuracy. The Teleskopkit was
developed in collaboration with
master dental technician Mr. V.
Schmidt. From one technician
for another one.
_It is feasible to produce smooth and precise milled surfaces, in any desired angle,
in a pre-sintered state
_No connectors on the friction plane, thus reducing the amount of grinding necessary
with a water-cooled turbine in the finishing phase, and therefore greatly reducing the
danger of micro-cracking within the material
_The life expectancy of the prosthetic restoration is increased
_The cylinder shaped blank reduces the amount of rough machining necessary
_The telescope crowns can be trial-fitted in the patient in the form of resin copings,
thus minimizing the need for extensive finishing later
_Even staining of the objects
_The patient has a greater sense of aesthetical value
_The system can be used in both the Ceramill Multi-x and the Ceramill Base
Application of the Teleskopkit in the
Ceramill Multi-x
C | 48
Telescope crowns above: Old production method, below: Production method using the Teleskopkit
SYSTEM COMPONENTS
ceramill gel
Light-hardening modelling synthetics for crowns and
intermediate bridge elements
_Cap modelling: Ceramill Gel (green) is of free-flowing
consistency for simple dosage and application
_Intermediate bridge elements: Ceramill Pontic (blue) has a
malleable consistency for rapid, individual shaping
_Low shrinkage for high precision and faster work
ceramill uv
Polymerisation lamp with motion sensor for rapid, reliable
hardening of modelling synthetics
_Proximity on/off switch for convenient use and freedom
from glare
_Wavelength carefully matched to synthetic material for
reliable polymerisation
_Audible signal at end of controlled polymerising time
means that polymerisation can be accurately reproduced
ceramill aqua
High-precision, light-action parallel milling tool for
high-performance ceramics
_Rustles milling tool for post-machining of hardened
ceramics, with a patented double-joint milling arm
_Can be connected via an adapter to any normally
available laboratory turbine
_Detachable splash guard for efficient results without
risk of contamination
C | 49
SYSTEM COMPONENTS
giroinvest super
A precise and controllable universal investment with a wide
scope of expansion (1.2 to 4.0 percent by volume)
Unique:
Giroinvest Super is an investment suitable for a wide range
of applications. It can be used
for crown and bridge works,
high-gold-bearing, precious
metal and non-precious metal
alloys. Not only the work
becomes noticeably easier and
more efficient during the use of
this investment; storage is considerably facilitated as well.
By changing the mixing ratio of
water and liquid, the expansion
range can be variably adjusted
from 1.2 to 4.0 vol %. The precise adjustability in the lower
and upper expansion area
makes this investment perfectly suitable for press ceramics
as well as non-precious metal
alloys.
_For precious alloys
_For non-precious alloys
_For press ceramic
_For inlays, crowns, and bridges
_For conventional heating and shock-heat method
_Also suitable for ringless systems
_Extremely wide scope of expansion
_Neat and smooth casting surfaces
_Flexible and priceworthy use
_Reproducible casting results
Setting expansion in %
3,0
2,5
2,0
1,5
1,0
0,5
0,0
50
55
60
65
70
75
80
85
90
95
100
Liquid concentration in %
C | 50
SYSTEM COMPONENTS
Alloys
All alloys at
one sight
CoCr-alloy
NiCrMo-alloy
Bonding alloys
Product name
Girobond NBS
CoCr-alloy
Titanium alloy
Model casting alloys
Girobond CBS
Girocrom FH
Girotan L
Description
The proven classical alloy: carbon-free CoCrMo bonding
alloy
Modern NiCrMo bonding alloy
for crown and bridge work
The ideal CoCr model casting alloy
Modern Ti6Al7Nb-alloy with
unique chemical and physical
properties
Features
_Excellent laser welding behavior, no risk of crack development since carbon-free
_High homogeneity within the
batches and good reproducibility thanks to the optimized
production process
_Suitable for casting with any
standard method
_Dense surface, good polishability, rich shine
_Low hardness (185 HV10)
_High strength
_Good melting and casting
properties
_Carbon-free, thus perfectly
suitable for laser welding
_Extra-hard quality, fracture-
resistant clasps
_Suitable for modelling
delicate frameworks
_Easy to model and polish
(fine-grained structure)
_Carbon-free, thus perfectly
suitable for laser welding
_Wider spectrum of indications
than pure titanium
_For crown and bridge works
_Also for clasp dentures and
suprastructures
_Easy to machine and weld
_Maximum biocompatibility
_Low thermal conductivity and
density
Technical/physical data
Proof stress Rp 0,2 % [MPa]
620
400
700
750
Tensile strengtht Rm [MPa]
850
650
880
850
Modulus of elasticity E [GPa]
210
180
220
110
Elongation at rupture A [%]
14
45
5
>8
Vickers hardness HV10
330
185
350
325
Casting temperature [°C]
1510
1410
ca. 1450
Melting rangel Solidus [°C]
1350
1270
1346
Melting rangel Liquidus [°C)
1422
1356
1388
Density [g/cm ]
8,2
1650
8,6
8,4
CTE 25-500 °C [x 10 K ]
14,1
13,8
CTE 25-600 °C [x 10 K ]
14,3
14
Co 62,4
Ni 63,5
Co 59
Ti 87
Cr 25,5
Cr 24
Cr 32
AI 6
Mo 5,1
Mo 10
Mo 6
Nb 7
3
-6
-6
-1
-1
4,52
10,1
Chemical composition in %
by mass
W 5,2
Other < 1 %
Si 1,3
Si 1,1
Si 1,5
Nb, Fe, N
Nb, Mn
CE-certified and free of nickel,
beryllium, gallium and carbon
Mn, N, Nb, W
CE-certified and free of nickel,
beryllium, gallium and carbon
C, N, FE, H, O, Ta
CE-certified and free of nickel,
beryllium, gallium and carbon
Packs
50 g Try-me package
781611
781691
721251
764321
(50 x 20 g Ingots)
1000 g Laboratory pack
781610
781690
721250
764341
(25 x 40 g Ingots)
C | 51
SYSTEM COMPONENTS
girobond nbs
® Modern NiCrMo bonding alloy for
crown and bridge work
Girobond NBS is a trailblazing
bonding alloy for the crown
and bridge technique. The
specific composition of this
CoCrMo alloy, with fine admixtures but no carbon content,
provides optimum properties
for outstanding results.
®
Girobond NBS metal framework
with porcelain facing
Dental lab Müssle, Pforzheim/
Germany
®
Hardness HV10
Comparison of hardness between
Girobond NBS and conventional
non-percious bonding alloys
®
340
330
320
310
Girobond
NBS
®
Alloy
A
Alloy
B
Comparison of the tensile bond
strength of metals and ceramics
Requirement in accordance
with ISO 9693
_CrMo bonding alloy for the crown and bridge technique, free of nickel and beryllium
_Excellent laser welding behavior, no risk of crack development since carbon-free
Crack initiation firmness (MPa)
50
40
30
20
10
0
According to
ISO 9693
Girobond
NBS
®
_Also suitable as universal alloy for model-casting clasp dentures, wide-span telescopic cases,
and delicate suprastructures
_High homogeneity within the batches and good reproducibility thanks to the optimized
production process
_Suitable for casting with any standard method
_Good controllability of the melting and casting process
_Easy milling (310 HV10)
_Dense surface, good polishability, rich shine
_Completely unproblematic and safe facing with conventional facing porcelains which suit the
coefficient of thermal expansion of Girobond®NBS 14.1 x 10-6K-1 (25-500°C)
Melting behavior of Girobond NBS
®
Begin of the melting;
the casting cubes melt
into each other
C | 52
The molten metal starts
to burst; However, some
shadows are still visible
The surface of the molten
metal shines; The metal is
completely molten - Casting has to be effected
immediately
Fine-grained struc­ture
of the niobium-dispersed CoC-Mo bonding
alloy Girobond®NBS
(magnification 100:1)
Coarse-grained structure of a conventional
CoCrMo bonding alloy
(magnification 100:1)
SYSTEM COMPONENTS
girobond cbs
® Modern NiCrMo bonding alloy for
crown and bridge work
Carbon-free, type 3 NiCrMo
bonding alloy for crowns and
bridges. Due to the dispersion
with Niobium, Girobond CBS is
easy to polish. Biocompatible
thanks to the high Mo content.
According certificates are available.
®
Girobond CBS metal framework
with porcelain facing
Dental lab Müssle, Pforzheim/
Germany
®
Comparison of the metal
to porcelain compound
Requirement in accordance
with ISO 9693
Crack initiation firmness (MPa)
50
40
30
20
10
0
According to
ISO 9693
Girobond
CBS
®
_Carbon-free NiCrMo-bonding alloy for crown and bridge works (type 3)
_Good compatibility and reliability just like NBS, but softer (HV10 185) and thus easier
to process
_Safe, easily workable, cost-effective material
_Optimised production process ensures high homogeneity
_Easy to cast by any method
_Carbon-free and thus no risk of crack formation; perfectly suitable for laser welding
_Due to a TCE value of 13.8 x 10 K (25—500°C), bonding of veneering ceramics is safe and
trouble-free
-6
-1
_Corrosion resistance has been proven by the Centre of Dentistry, Oral Medicine and
Maxillofacial Surgery, University of Tübingen (Germany)
_No overheating of the melt due to melt reflection
Melting behavior of
Girobond NBS/CBS
® Begin of the melting; the casting
cubes melt into each other
The molten metal starts to burst; However, some shadows are still
visible
The surface of the molten metal
shines; The metal is completely
molten - Casting has to be effected
immediately
C | 53
SYSTEM COMPONENTS
girocrom fh
® The ideal denture base alloy for the complete
range of removable dental restorations
Extra-hard, suitable for laser
welding and easy to model –
these are the requirements on
a superior model casting alloy.
With Girocrom FH, these
requirements have become
reality – a carbon-free alloy
with excellent mechanical
properties.
®
Laser welding offers dental
technicians the advantages of
modern joining technology and,
at the same time, means maximum biological compatibility to
the patient. Due to their carbon
content, conventional alloys
precipitate carbides during
laser welding. These, in turn,
have a quality-reducing effect
on the welding seams and
involve cracks and fractures.
Mandibular model casting denture
with clasps, Dental Lab Müssle,
Pforzheim/Germany
Girosolder out of CoCr, 3.6 g
as solder rods
Recommended for soldering of CoCrMo alloys
_Extra-hard denture base alloy
_Improved stability
_Suitable for all kinds of removable restorations, e.g. metal denture bases,
combined fixed-removable restorations, telescopic cases, dentures with slide
attachments or clasps
_Easily activated clasps at model casting dentures, with minimized fracture risk
_Carbon-free and, thus, ideal for laser welding
_Easy processing and polishing; relatively low Vickers hardness HV10 of 350
_Excellent biocompatibility and corrosion resistance
Proof stress Proof stress Rp 0,2% (MPa) - different CoCr-alloys for partical denture
Carbon free
750
700
Containing carbon
710
< 0,02
701
688
< 0,02
650
600
720
< 0,8
679
< 0,2
< 1,0
610
< 0,05
580
550
< 0,04
500
Girocrom
FH
Competitor
A
Competitor
B
Competitor
C
D
Competitor
E
F
Cracks caused by carbide
precipitation in a CrCoMo alloy
containing carbon
C | 54
Laser weld without any cracks in
a carbon-free CrCoMo alloy
SYSTEM COMPONENTS
giroinvest speed
The ideal investment for Girocrom
restorations
®
Giroinvest Speed is a
phosphate-bonded precision
investment for the model
casting technique.
_Phosphate-bonded precision investment for model casting
_Can be heated up either with the shock-heat method or conventional
heating with delay
_30 minutes setting time using the shock-heat method; the mold is subsequently
placed into the preheated furnace heated up to a maximum temperature of 1050° C;
ready for casting after 60 min
_Casting without casting ring possible
_Smooth casing surfaces and excellent fit due to the shock-heat method
_Expansion is regulated by adjusting the liquid concentration
_The large 4 kg package size is based on the capacity of the Smartbox Invest
and therefore makes storage easier
C | 55
SYSTEM COMPONENTS
noflame plus
® The “electric Bunsen burner” in the form of compact
induction heating replaces the open flame
Within seconds, the modelling
instrument is heated up in the
coil opening at very low power
consumption.
To be used at any place where
an electric socket is available.
_Mobile and immediately operational, no gas required
_Handling as usual, no adjustment required
_Eliminates the risks of getting burned or causing fire
_No heat emission into the environment; does not consume oxygen
_Clean, i.e. no soot particles on instrument and/or material
_Saves 75 % of energy expenses; saves the environment
_Ideal conditions, to be used even at the dental office
Within seconds, the modelling instrument is heated
in the coil opening
C | 56
Replaceable protective caps keep
the coil opening clean
SYSTEM COMPONENTS
smartwax duo
Efficient modeling station for
working with two handpieces
This unit is suitable for all kinds
of modeling and wax-up work
and is unbeatable in combination with the Waxjet when making full dentures. For each
handpiece, 3 different temperatures within the range of
50-220°/122-428 F can be programmed and simply switched
over. This improves the soft
and above all stress-free treatment of the various types of
waxes.
In doing so, the excellent thermal conductivity of the instrument alloy used for the probes
(more than 20 times the thermal conductivity of stainless
steel) plays an important role
as well.
_Duo-option, i.e. two different handpieces are ready for use
at the same time
_3 individually programmable temperatures for each handpiece
_Simple and safe exchange mechanism of the modeling tips
_Fast operational and heated instruments
_Anti-twist cables that are insensitive to heat
_Gold plated copper tips for better heat conductivity
Change of probes without the
risk of burns – snap on, snap off
Simple adjustment of individual
working temperature
Waxjet available as an
optional device
C | 57
FS RY SÄ TS ET M
E CCHONMI KP O N E N T S
Universal use thanks to modular components
for surveying, blockout, milling
Stable precision milling device
on solid vertical column with
ball thread and playless,
smooth, double-jointed arm.
Milling head with micrometer
screw for accurate adjustment
of vertical drillings. Integrated
control for micromotor, magnetic table with modular design
and light connections.
Micromotor can be replaced by
optional analyzing rod for surveying or block out set for
blocking out.
_Upgradable to an undercut and surveying machine (optional)
_Quick and easy fixing of the double-joint arm with one hand
_Automatic retraction of the articulated arm via memory function
_Model table can be magnetically fixed in its position automatically by pressing one button
_It is possible to fix the model table MT3 at the push of a button in any angle with the
patented fixing mechanism
_Spring pressure arm resistance for vertical manoeuvrability
_Shadow-free illumination with the LED double light fixture
Blockout Upgrade Kit AF350
adjustable for blocking out
and surveying
Delivery volume:
Blockout- Set
Marker
Adapter cord, adjustable
Blockout Set
C | 58
Marker
Adapter cord, adjustable
FS RY SÄ TS ET M
E CCHONMI KP O N E N T S
General-purpose
parallelometer
Due to its modular construction
it can be upgraded to a full
milling machine and blockout
device. It has an electromagnetic base plate for fixing the
model table, an articulated arm
and an analyzing rod. The electricity for the device and the
light as well as the continuously variable control for the electrically heated block out set are
placed in the base.
_Upgradable to a blockout device and milling machine.
_Quick and easy fixing of the double-joint arm with one hand
_No-play and smooth three-dimensional guidance
_Automatic retraction of the articulated arm via memory function
_Temperature control for blocking out with the blockout-set
_Model table can be magnetically fixed in its position automatically
by pressing one button
Milling head for converting the
AP100 into a milling machine.
The milling head is placed in
the articulated arm and its
adapter is connected with an
existing handpiece.
Milling head
The optional block out set can easily
be attached to the analyzing rod
Continuously variable temperature
control for block out set
C | 59
C | 60
ORDE
INFORMATION
O R D E R I N F O R M AT I O N S
Artex Articulators
®
217360 Artex Typ BN
217310
Artex Typ CN
217320 Artex Type CT
218750 Artex Typ CP
218760 Artex Typ CR
218730 Artex Arcon clip
Artex Typ CN
®
Artex Typ CT
®
217330 Modell plate blue (pair)
217331
Modell plate blue, 50 pcs.
215250 Retention Disks, 100 pcs.
299991 Individual engraving on Artex
217333
Artex Typ CP
®
Support pin C screwable
Artex Typ CR
®
Artex Typ BN
®
Dentist Kit
Free choosable Artex articulator, Splitex Plate Set, Artex Facebow,
Splitex Transfer Stand
217310, 217320, 218750, 218760
Artex (CN CT CP CR)
216100C Splitex Plate Set
218600 Artex Facebow
216240 Splitex Transfer Stand
Dentist Mini Kit
Artex Facebow, Splitex Transfer Stand
218600 Artex Facebow
216240 Splitex Transfer Stand
Technician Kit
Free choosable Artex articulator, Splitex Plate Set, Counter Plates,
Retention Disk, Splitex Key
217310, 217320, 218750, 218760
Artex (CN CT CP CR)
216100C Splitex Plate Set
216235 Counter Plates
216150
Retention Disks
216010C Splitex key
B | 62
O R D E R I N F O R M AT I O N S
Splitex Keys
®
216010C Splitex key for Artex, 126 mm, C-Version
216010
Splitex key for Artex, 116 mm
216011
Splitex Spacer Plate +10 mm
(required for new serial 126 mm)
Splitex Disc Set
®
^
216100C ! – ^ Splitex Plate Set, C-version
$
216100
Splitex Plate Set (without picture)
216110C !Splitex Base Plate (TOP) without magnet
216120C @Splitex Adjust. Plate mandibular without magnet
!
216160
@
216150
#1 Magnet Removal Pin, 2 / pkg.
$Retention Disks, 100 pcs. (Set: 2 pcs. included)
216111C %Splitex Magnet (Set: 2 pcs. included)
216112C ^Assembly wrench
#
%
Plate Set, C-Version
216170
Splitex Screws max. / mand.
216140
Splitex Magnets, 6 pcs.
216113C &Mounting tool for magnetic holder
&
Mounting tool
Splitex Counter Plate
®
The shock-resistant plastic material reliably adapts the Splitex plinth
plate without distortion. Both plates are suitable for multiple use.
The Premium quality (white) offers a higher accuracy (< 10 μm!).
_Always available for quick, precise adaptation at the plinth plate
_Prevents the risk of ill fit since no plaster expansion takes place
_Tight, even model fixation, but nevertheless allowing safe removal and reposition
216230 Splitex-Counter Plate, 10 pcs. Premium white
216235 Splitex-Counter plates 100 pcs. Classic black
216150
Retention Disks, Ø 36,5 x 1,5 for Splitex 100 pcs.
Splitex Starter Kit
®
&
$
216050C ! – & Starter-Kit C-Version
216010C !Splitex key for Artex, 126 mm, C-Version, 1 pcs.
%
216100C @Splitex-Plate Set, C-version, 3 pcs.
216150 #Retention Disks, 100 pcs.
216020C $Splitex Mounting Articulator, 1 pcs.
216230 %Splitex-Counter Plate, 10 pcs.
^
216200 ^Master platform
743040 &Artex separating spray
216050 ! – & Starter-Kit
!
@
#
B | 63
O R D E R I N F O R M AT I O N S
Artex / Splitex Mounting Articulator
® ®
The mounting articulator is not used as an articulator, but can be
understood as a device which protects this precision instrument.
Since models can be freely exchanged between similarly-calibrated
articulators, they do not need to be transported in the articulator
but can be transferred using mounting articulators which are similarly calibrated to the same model settings.
_Safeguards articulators against water and plaster dirt
_Compatible with all types of facebow and transfer systems
_Centric and vertical height are fixed using rigid
hinge axis / incisal pins
_Easy removal of the models due to a detachable magnet in the
upper frame
216020 Splitex Mounting Articulator
216020C Splitex Mounting Articulator, 126 mm Carbon-Version
Technical Data
Dimension: 160 x 160 x 160
Weight: 700 g
Finish: Aluminium anodized
216021
O-Ring for head support
216031C Conversion kit for Mounting articulator C-Version
216030C Anterior guidance pin 126 mm C-Version
Splitex Master Platform Set (1 to 3 parts)
®
For the production of Splitex Counter plates made from surplus
stone. Magnetically connects to the Splitex plates.
!
216200 !Set, 3-parts
216150 @Retention Disks, 100 pcs.
216211
#Master platform set
216220 $Rubber frames for socket
216205 @ – $ Set, 1-part
#
@
$
!
@
216141
1 Magnet (built-in)
216221
Rubber frame for socket, low-level
Splitex Mounting Glue
®
For the controlled fixing of the mandibular adjustment plate in the
articulator. Creates the smallest gap width possible, no shrinkage,
safe adhesion.
_Economical, easy to use, and removable for renewed adjustment
513110
513120
!50 ml Mounting Glue / Loctite
@150 ml Cleaner f. Glued Areas
Artex Separating Spray
®
Silicone-based separating spray for Metal, Stone, keeps Articulator
and model plates clean.
743040 300 ml
Artex -Modell Plate
®
Artex model plates enable easy and quick retaining due to integrated
magnets in the upper and lower part of the Articulator. Suited for
multiple use.
217330 Modell plate blue (pair)
217331
Modell plate blue, 50 pcs.
215250 Retention Disks, 100 pcs.
B | 64
O R D E R I N F O R M AT I O N S
Dr. Behrend Type Clinometer
Adjustable Perspex shield furnished with several vertical lines and
two horizontal lines, for transferring physiognomic esthetic parameters. Once adjusted to the facebow, the horizontal lines can be
aligned to match the eyes and the line of the anterior teeth, using
the rotary control. The tooth position as determined is represented
as an angle, and can be transferred to the articulator in the labora-tory to recreate the position of the anterior teeth.
®
_Determines asymmetries and compensates them during set-up
_Supplies the technician with important esthetic information
_Helps to prevent remakes, improves function and esthetics
219960C !“Operatory” Clinometer
219950 @“Laboratory” Clinometer
218110C Pin holder
217131
!
Cranked pin for Artex
@
Centrofix nach Dr. Lüth
®
Intra-oral centric registration with vertically adjustable tracing ball:
Corrects the vertical distance during registration and locks the
determined centric position without plaster by means of an adjustable clamp. German Patent 4014975, US Patent 5.188.529
_Time-tested support pin methodology – safe functional results
_All relevant information in one session: moulding, jaw relation / vertical distance, axial relation, aesthetics template
_Stable and reliable registrations and information for your lab
242700 ! – BM
242710 !Writing board broad
242720 @ Writing board narrow
242740 # Pin carrier
*
242750 $ Tracing ball long
242751 % Tracing ball short
!
^
(
242790 * Combination wrench
242810 ( Copper writing platelets
%
#
@
&
242760 ^ Adjustable clamp
242780 & Cross
$
242820 BL Spirit level
242830 BM Distance piece (plastic hose)
BL
BM
B | 65
O R D E R I N F O R M AT I O N S
Artex Set-Up Index Key for the maxilla
®
This facilitates average-value alignment of the endentulous maxilla
at the remaining anatomical fold in the throat. The vertical adjustment of the support fork and the reciprocal bar facilitate improved
individual positioning of the model.
_Semi-individual positioning in the articulator without facebow
_Basic version with screw thread, or conversion plate for the Splitex
System
®
216255C incl. thread (Thread version) for Carbon-Version
216180
Splitex-Alteration plate
Artex Set-Up Index Key for the mandible
®
Fundamental scale for average-value alignment of the endentulous
mandible model at the symphysis and retromolar pads.
217700 !with thread
217700C @126 mm for Carbon-Version
216250 with Splitex adaption plate
216250C Setup index key with Splitex,
126 mm for Carbon-Version
!
@
Artex Set-Up Templates
®
Guide for set-up of full dentures according to the Spee / Wilson
occlusion curve. The horizontally and vertically adjustable device
with occlusal plane indicator and adjustable inclination supports
the different templates.
_Flat template for average-value mounting of dentulous models
_4 radius for adjustment to different tooth / set-up concepts
_Screw or magnet version, to be ordered separately or as a set
217730 Setup template, “thread”
217730C @Template holder, thread for Carbon-Version
!
217740 Template flat
217741
Template R 100
217742
Template R 125
217744 Template R 140
217746
Template R 160
217749
Setup templates kit, 6 parts
217749C !Setup Templates, 6 pcs., 126 mm for Carbon-Version
217731
@
#
Support for Setup templates, low-level, Bitex I/II
216260 Setup template with Splitex profile
216260C #Template holder with Splitex, 126 mm f. Carbon-Version
216269 Setup template with Splitex profile incl. Support-kit
(5 parts, 217740-746)
216269C dito, with Template-Set 5 pcs. for Carbon-Version
217702C Distance piece accessory, screwable (10 mm)
216252C Distance piece accessory, Splitex (10 mm)
Ord.-No.
217746
217744
Spherical
cap
radius
Molar
cusps
160 mm
30-35°
140 mm
25-28°
Tooth type
Tooth manufacturer
Creapearl
Creation
Poly-Star Lux HK
Biodent,
Articron
Orthognat
B | 66
217742
125 mm
15-16°
n, t, k, Odilux
217741
100 mm
0°
Orthocal
®
Merz Dental
De Trey
Lindauer Zähne
Ivoclar, Weithaas
Vita
Lindauer Zähne
O R D E R I N F O R M AT I O N S
Artex Anterior Guidance
®
Special accessory which fits in all Artex Articulators, to mechanically
individualize / program the anterior area.
®
_Micrometer pin to exactly raise / lower the anterior guidance in
steps of 1/10 mm
_Individual anterior guidance using radially guided pin with
infinitely variable table plate (protrusion 0-40 °, laterotrusion
0-70 °, turning to right and left)
_Cranked pin provides for unhindered access during anterior set-up
and maintains clear sightlines
!
217586 ^Support pin
217586C Anterior guidance pin for Carbon-Version
217589 &Anterior guidance pin
217589C Anterior guidance pin, C-Version
217585 *Anterior guidance pin complete
@
217585C %Anterior guidance pin for Carbon-Version
218170C $Individ. anterior guidance, 0-70° protrusion, 0-40°
laterotrusion pin, table, adjusting bolt for Carbon-Version
218162 (Heightener 10 mm for radial pin
218120C BQRadial pin, C-Version
218135C BRRadial pin attachment angled
217260 BLArtex Incisal needle
218140 BMArtex Incisal plate incl. 218141, 218142
218141
BNTable adapter 10°
BNTable adapter 20°
218142
$
#
217340 @Plate anatomical for Carbon-Version
(40° protrusiv; 30-40° laterotrusiv)
217342 !Standard incisal plate 0° for Carbon-Version
218110C BOPin holder
BPMicrometer pin
217131
218180
217586
^
&
217134
217589
217341
217586C
218160
217589C
218141
218142
#Micrometer pin Artex
(
BO
BP
218162
218110C
217131
218180
217340
217342
#
218150
217260
BN
BL
217585
218140
217585C
*
BM
%
@
!
218170C
218120C
218135C
$
BQ
BR
B | 67
O R D E R I N F O R M AT I O N S
Artex Facebow
®
218600 ! – %
218620 !Joint Support
218680 @Leipzig Nasion
218607 #Porus Buttons “Standard”, pair
@
#
217650 $Artex Quickbite, 10 pcs.
217928 %Tray Handle
Optional accessory:
218609 Porus Buttons long, pair
218610
Axis-plane Pointer w. screw
218635 Carrier for Facebow Cadiax compact, pair
218690 Nasion vertically adjustab.
217650 $Artex Quickbite, 10 pcs.
$
217928 %Tray Handle, 5 / pkg.
^Bite fork partial two-pack
217611
!
%
@
$
^
Impression Compound
Thermoplastic for facebow registrations and centric bite impressions.
_Soft plastic condition below 55 °C
_Clear and precise performance without any deformation
_Quick transition to solid consistency
463450 Impression Compound 115g pack / 15 bars
Bite Tabs
Thermoplastic pellets on self-adhesive foil to cover the metal bite
fork for facebow registration.
642150 180 Tabs
Artex Transfer Stand
®
For safe transport of the facebow registration to the lab. The universal joint with bite fork is removed from the facebow and inserted into
the reception of the transfer stand. There, the registration is fixed in
plaster. The detachable transfer table safely and unshakeably takes
this important patient information to the lab.
218670C !Transfer Stand with table for carbon version
216240 @Splitex Transfer Stand complete
!
B | 68
@
O R D E R I N F O R M AT I O N S
Artex Transfer Table
®
The detachable part of the transfer stand, either with screw for
model plates or furnished with Splitex magnetic plate. Several transfer tables are necessary in case of short registration intervals
(whereas only one facebow and one transfer stand are required).
_Saves money since only one facebow is sufficient
_Saves plaster work at the practice but ensures safe
transport to the lab
!
217671C !Transfer Table for carbon version
216270 @Transfer Table with Splitex Profile
@
Artex Transfer Jig
®
Another direct alternative to the transfer stand and to the direct
facebow transfer. The universal joint with bite fork is attached to the
jig holding the registration in axis relation while fixed at the bottom
part of the artex articulator.
_Direct and safe model transfer without additional steps
_Reasonable solution at the practice – saves one “plaster cycle”
218631
Artex Bite Fork Support / Telescoping Legs
®
Infinitely variable bite fork support (see picture above). The
magnetic plinth is compatible with all conventional articulators.
@
!
_Fits all types of articulators, either fixed with screw or magnetically
_Height adjustment by means of a thread, fine adjustment
by telescopes
The telescoping legs are screwed in to support the facebow
anteriorly during the direct transfer of the facebow registration into
the articulator. A level helps to adjust the facebow horizontally to
the table plane.
217685 Bite Fork Support
217624 !2 Telescopic Legs @ + Level
Artex case
®
217991
Artex case with foam rubber padding (without content)
Artex iTero
®
The Artex iTero model adapter set enables direct transfer
of a set of models created from iTero scan data to the Artex
Carbon articulator.
216310
Artex i-Tero model adapter (set)
B | 69
O R D E R I N F O R M AT I O N S
Artex Noplast
®
Artex Type NK for easy mechanical model fixation without plaster.
The freely movable model plate safely holds the model in place
accor­ding to the conventional method with a model table. With help
of female thread screws, bars / joint discs rigidly block the relation,
strain-free and distortion-free.
®
_Time-saving interim solution for model analysis / discussion
_For the making of individual trays / templates and for orthodontic apparatuses
_To check the function of Co-Cr cases on investment models
_Spares valuable working articulators if used for interim steps
(but it may not, and cannot, replace the model plaster for definite
restorations!)
Technical Data
Dimension: 67 x 35 x 46
Weight: 157 g
217460 Noplast upgrade kit (OK / UK carrier)
217480C Noplast for Artex Carbon
Spray marker
Green occlusion spray with food-grade ingredients. Develops only little spray-dust, fully water-soluble.
_Homogenous spray pattern
_Allows for precise dosing
_High selectivity
541390 Spray marker green, 75 ml
Artigator
For the expert and artistic processing of the “triple-tray technique”
by the dental technician. This way allows to directly transfer the
impression into the position-safe auxiliary Artigator articulator,
regardless of the cranium / axis relation.
_Sturdy unit with safe centric and Artex “click” lock
_Performs average-value movements as well as immediate
sideshift (ISS)
_Full frontal access for proper adjustability thanks to the crank pin
_Direct segment model in magnetic pin plate
_Replaces four work steps with one, saves half the plaster
consumption
_Quick amortization due to enormous time and material saving
®
218950 ! Artigator incl. 2 Base Plates blue
Accessory:
218941
@Artigator – Base plate blue, 50 pcs.
218933 #Artigator base collar
!
Technical Data
Dimension: 120 x 90 x 110
Weight: 480 g
Finish: Alluminium anodized
218934 Artigator incisal pin
218935 Artigator Support pin
218940 Artigator centering key
218949 $Artigator Trennspray / 1 l
218931
%Artigator pin plates U (upper)
218932 %Artigator pin plates L (lower)
$
@
B | 70
#
%
O R D E R I N F O R M AT I O N S
Giroform Pin Drill
®
176700 Giroform Pin Drill
Delivery volume: Tungsten carbidge burr 176710, plate support - L 176712,
impression carrier 176733, Tubular socket wrench 176702,
holding pin 176703, screw driver for adjustment 176004
176710 Giroform-Tungsten Carbide Burr
176712 Giroform-attachment for plates L
176733 Giroform-Impression carrier
Technical Data
Dimension: 250 x 183 x 370
Weight: 9,6 kg
Mains supply:
230(100/115)V/0,32 W
Motor speed: 2.800 min
Laser class: 3A < 5mW
-1
Accessories:
176712
Giroform-attachment for plates L
176722 Giroform-attachment for plates XL
176711
Giroform-attachment for plates Quadrant
Giroform Starter Kit
®
^
576702 Giroform-Starterkit
176710 !Tungsten carbide burr
176733
@Impression Carrier 2x
321070 #NT-Cutter
359010 $Hammer with Aluminium handle
&
@
(
576450 %Giroform-Pins, 1.000 pkg.
576461 ^Giroform putty 1 kg
576710 &Giroform base plate Premium +, 100 pkg.
5767501 *Giroform secondary plate 5x
*
%
BM
BL
BP
BO
576805 BM Giroform space retainer foil, 50 pkg.
815300 BN Arbor band mandrel 2.35 mm
$
BN
!
576765 (Adjustment plate clear, 2 pkg.
576950 BL Giroform sleeve “kombi”
815330 BO Arbor band, grain 120, 50 pkg.
990252 BP Timer
#
576702INT Giroform Starter Kit International
= Starter Kit 576702 + Classic Plate 576720 (10 pcs.),
Magnets 512511 (10 pcs.), Sockets 512512 (10 pcs.),
576716 Magnetic plates incl. screw (10 pcs.)
Giroform Base Plates, 100 pcs.
®
576710 !Giroform Premium+ L, 100 pcs.
576745 Giroform Premium+ XL, 100 pcs.
576720 @Giroform Classic L, 100 pcs.
576740 Giroform Classic XL, 100 pcs.
!
@
#
$
576726 #Giroform Classic L blue, 100 pcs.
576765 $ Giroform adjustment plate L, 2 pcs.
576766 Giroform adjustment plate XL, 2 pcs.
Giroform Secondary Plate
®
576750 L with Magnet, 50 pcs.
576751
XL with Magnet, 50 pcs.
Giroform Pins
®
576450 1.000 pcs.
576451 10.000 pcs.
B | 71
O R D E R I N F O R M AT I O N S
Giroform Quadrant Base Plate
®
Shape retaining acrylic base plate for Quadrant impressions.
576770 Giroform Quadrant base plate, 100 pcs.
576771
Giroform adjustment plate for Quadrant, 2 pcs.
Giroform Adapter for Vertex
®
®
Adapter for usage in the Giroform base mounting plates in Vertex
single-use articulators.
576790 Giroform adapter for Vertex articulators, 100 pcs.
Vertex is a registered trademark of Dentsply Ceramco
®
Giroform Starter Kit Quadrant
576702QGiroform Starter Kit Quadrant contains:
176711
Giroform-attachment for plates Quadrant
576770 Giroform Quadrant base plate, 100 pcs.
576771
Giroform adjustment plate for Quadrant, 2 pcs.
576790 Giroform adapter for Vertex articulators, 100 pcs.
Vertex is a registered trademark of Dentsply Ceramco
®
Giroform pin drill
®
Conical hard metal drill, cutting geometry perfectly matches the
giroform base plate material.
_Short chips smooth cladding
176710
Giroform Putty
®
Silicone putty for placing and blocking the mould on the mould
carrier, saves plaster as well as subsequent trimming and grinding,
pleasant lemon fragrance.
_Great time-savings as a result of quick blocking
576461 1 kg tub
576465 5 kg bucket
Giroform Magnets and Sockets
®
Magnet Ø 31.9 x 6 mm, including socket and retention disc. Allowing
removal of the model and reposition in the articulator. Independent
system use.
512500 Magnets with Sockets and Retention Disks, 10 pcs.
B | 72
512511
Magnetic plates 100 pcs. Ø 20 x 6 mm
512512
Sockets 100 pcs. Ø 25 x 7,5 mm
O R D E R I N F O R M AT I O N S
Giroform magnetic discs
®
! Edged, Ø 31.9 x 1.5 mm for universal usage,
@ Stainless steel flat, edged Ø 36.5 x 1.5 mm for Splitex
counter plates
# Ø 25 x 1.0 with centric bore and M3–countersunk screw
for Giroform Classic base plates
!
@
#
215660 ! Retention Ø 31.9 x 1.5 100 pack
216150 @ Retention discs stainless steel
Ø 36.5 x 1.5 for Splitex 100 pack
576716 # M3-Retention discs for Giroform Classic
Ø 25 x 1.0 100 pack incl. screws
576717
Screwdriver for retention screws
Giroform Space retainer foil
®
Provides enough space for pins and magnet. Stabilizes the base plate
in the area of the splitcast profile.
576805 50 pcs.
Giroform Base Collar
®
Used Giroform Base Plates which have already been drilled can be
used to make master casts.
®
576950 !Base Collar L-Kombi
576961 @Base Collar XL
!
@
Giroform Duplication Flask
®
For the duplication of refractory dies varying in size from single
segments up to the complete dental arch. Suitable for Giroform
base plate L.
®
576670
Giroform Refractory Pin
®
Removable conical ceramic pins, inserted into the base plate, are
used in refractory duplication.
576480 Giroform Refractory Pin, 25 pcs.
Giroform Labels
®
909032 1000 pack
B | 73
O R D E R I N F O R M AT I O N S
Smartbox X2
116170
Smartbox X2
230 V (115 V = 116170V115)
Delivery volume: Basic unit with integrated 8 kg plaster container,
3 l water container, power cable
116101
Protection cover
117201
Beaker distance piece (2 items)
Technical Data
Dimension: 335 x 240 x 590
Weight: 16,5 kg
Mains supply:
100/115/230 V, 50/60 Hz
Machine rating: 95 W
Capacity powder: ca. 8 kg
Time to allot 20 ml : 100 g appr. 30 s
Smartmix X2
115700
Smartmix wall mounting 230 V
Delivery volume: basic unit with beaker 500 ml, for wall-mounting,
drilling template, 4 screws with dowels, 1 replacement filter
Technical Data
Dimension: 250 x 160 x 350
(without stand)
Weight machine: 8,5 kg
Weight stand: 7,9 kg
Mains supply:
100/115/230 V, 50/60 Hz
Machine rating: 210 W
Delivery rate: 15,8 l/min
Vacuum power: -800 mbar
100 ml
B | 74
250 ml
500 ml
115730
Stand for Smartmix X2
115620
Beaker with mixing blade 100 ml
115630
Beaker with mixing blade 250 ml
115640
Beaker with mixing blade 500 ml
115650
Beaker with mixing blade 750 ml
115660
Beaker with mixing blade 1000 ml
115631
Beaker 250 ml
115641
Beaker 500 ml
115651
Beaker 750 ml
115661
Beaker 1000 ml
115701
Spare filter for Smartmix X2, 5 pcs.
750 ml
1000 ml
Alpenrock
A
D/C M
A
The new generation of Class 4 high-strength dental stone for
fabricating dental arches, single dies and check models.
The expansion is ideally matched to Giroform model fabrication.
S U I TA B L
E
C
O R D E R I N F O R M AT I O N S
711110
gold
20 kg carton (5 x 4 kg-Bag)
711111
gold
1 x 4 kg-Bag
711120
pastell
20 kg carton (5 x 4 kg-Bag)
711121
pastell
1 x 4 kg-Bag
711130
safran
20 kg carton (5 x 4 kg-Bag)
711131
safran
1 x 4 kg-Bag
Artifix
®
White synthetic articulation plaster with minimum expansion,
suitable for manual and machine mixing. Indication: working models
articulating, orthodontic models rebasing, fixation of milling bases,
bite registration and indexes.
_Covers quickly, does not clump, creamy consistency, sets quickly
_Low setting expansion: 0.03 %!
711217
20 kg carton
Girostone
®
American natural super-hard plaster, class 4, universal for all
prosthetic applications, material of choice for situation and master
models – also for fully prosthetic working models due to its low
brittleness.
_Cost-efficient high-quality natural super-hard plaster in 3 colours
711021
rosé
20 kg carton
711022
pastell
20 kg carton
711023
yellow
20 kg carton
Girodur
®
Synthetic class 4 super-hard plaster for stump and master models.
_Low-price alternative to all precision model types
711105
white
20 kg carton
Girobase
Class 4 base plaster for precision saw-cut model in solid (white) or
liquid (blue consistency).
_Optimal flow properties, 2 / 5 min (white / blue) processing time
_Little expansion, smooth surface, high final hardness
711240
white (solid)
20 kg carton
711250
blue (liquid) 20 kg carton
Giroplast
High-strength synthetic plaster for full prostheses, especially for
plastic extrusion techniques (e. g. polyan). The great working
pressure during insertion of the plastic material into the container
requires high pressure-resistance to counteract deformation.
_High strength for plastic extrusion
_Expansion values adjusted to full prostheses
711040
green
20 kg carton
711050
blue
20 kg carton
711060
white
20 kg carton
B | 75
O R D E R I N F O R M AT I O N S
Giroform Die Link
®
With Giroform Die Link, AmannGirrbach presents a series of airdrying die varnishes which, for the first time ever, contain innovative
chemical primer components as well as nano particles. These new
ingredients ensure excellent bonding of Giroform Die Link to dental
plasters or stones and provide smooth and scratch resistant surfaces
of the die varnishes optimized for dental technology. The superthixotropic consistency of Giroform Die Link guarantees an even, homogeneous layer thickness.
®
®
®
Giroform Die Link - Die Varnishes
®
_Giroform Die Link is available in 5 colors and in 5 different layer
thicknesses (between 0 μm – hardener – and 20 μm)
_High bond strength to the die thanks to primer technology
_No flaking-off during steamcleaning
_The smooth, homogeneous surface allows easy removal
of the wax modellation
_Thanks to the high scratch resistancy, the surface is almost
undamageable
_The superthixotropic behaviour of Giroform Die Link
allows to evenly apply the varnishes all over the die
_No multiple applications on the edges
_No drop formation
®
®
Giroform Die Link Hardener (0 μm) with color indicator
_Safety and control during the application of the hardener thanks
to the colour indicator
_No multiple applications
®
Color
Layer thickness
blue
grey
gold
silver
red
20 μm
20 μm
15 μm
13 μm
8 μm
782110 Giroform Die Link Hardener
782111
Giroform Die Link Hardener clear (0 μm) 15 ml
(0 μm) 15 ml
782120 Giroform Die Link blue
(20 μm) 15 ml
782130 Giroform Die Link grey
(20 μm) 15 ml
782140 Giroform Die Link gold
(15 μm) 15 ml
782150 Giroform Die Link silver
(13 μm) 15 ml
782160 Giroform Die Link red
(8 μm) 15 ml
782170 Giroform Die Link Thinner
Giroform Die Link Lube insulation
®
Insulated the plaster model from wax and is specially adjusted to
Die Link matte varnish.
_Insulates also when used sparingly
_Non-alcoholic and solvent-free
_Water-soluble
_Non-reactive with embedding mass
782180 Giroform Die Link Lube, insulation
15 ml
Giroform Die Link Starter-Set
®
782100 Giroform Die Link Starter-Set
Content: 1x Giroform Die Link Hardener, 1x Giroform Die Link blue, 1x Giroform Die
Link grey, 1x Giroform Die Link Thinner, 1x Giroform Die Link Tray
B | 76
O R D E R I N F O R M AT I O N S
Abrasive belt / mandral
For pre-trimming of model stumps and trimming of tooth arches.
_Quick, efficient and vibration-free removal of material
815300 mandral cylindrical
815310
50 pack
ISO 070, length 11 mm
815330 grain 120 50 pack
grain 80
ISO 070, length 11 mm
815340 grain 240 50 pack
ISO 070, length 11 mm
Model boxes / model cases
Deep-drawn transparent box for transporting dental models,
self-locking, with 2 foam rubber cushions.
!
_Various sizes and heights, also for plastic bases
_Cost-efficient bulk packaging of 30 pieces each (10 x 3 units)
511430
small
(78 x 70 x 45)
511450
large (90 x 80 x 60)
511460
x-high (90 x 80 x 80)
511470
x-large (100 x 90 x 90)
! model case
511540
Girosolve Pro
Plaster dissolution with high dissolving speed and capacity, for all
kinds of plasters and plaster-bonded investments. Dissolves and
removes plaster remainders from dentures, impression trays, mixing
bowls, and cast objects.
_Higher effectiveness and economy – increased by 20 %, control
through bubble activity
_No acids, neutral pH-value, suitable for all materials
_Efficiency multiplies if used in an ultrasonic bath
_Disposal of used solution through the sewage system
714050 Girosolve Pro, 2 l
Ceramill Airstream
Technical Data
Dimensions: 406 x 280 x 423
Weight: 16 kg
Electrical connection values (V/A/Hz):
230/3,6/50-60, 115/7,0/50
Performance: 1000 W
Volume: max. 52 dbA
Filter bag size: 10 Liter
Hose diameter: 38 mm
Hose length: 1,8 m
Adapter diameter: conical, 37-38 mm
HEPA micro filter (97,97%),
Filter class H12, dust class M
_Extractor for Ceramill Motion, Multi-x
_May also be used for other devices with attached adapter
178600 Ceramill Airstream 230 V
(100-120V = 178600V100-V120)
178610
Airstream Suction Bag (5 pcs.)
178611
Airstream Microfilter (1 pcs.)
B | 77
O R D E R I N F O R M AT I O N S
Steamer X3
116910
Steamer X3 230 V
Delivery volume: Mounting template, Instruction for use, Test strips for measuring
water hardness, 1 x 250 ml bottle of Kalk-X descaling liquid Power cord, Set of safety
cap gaskets (white teflon gasket and silicone gasket)
Optional accessory:
116811 Kalk-X Liquid descaling agent (4 x 250 ml)
516330 Clean Steamer
516340 StymoNet
116911 Sealing lid
116912 Seal for lid
Technical Data
Dimension: 275 x 265 x 455
Weight: 12,5 kg
Mains supply: 230V/50 Hz /115V/60 Hz
Machine rating: 1600W / 1000W
E-fuse: T10A
Boiler volume: 3.7 l
Vapor pressure: 4.0 bar
Warm-up time: approx. 25 min
CleanSteamer
Hollow cylinder with hinged lid and sieve portion to collect impure
small parts (teeth, crowns, etc.). By opening the hinged lid, saturated
steam is blown into the object carrier. Addition of dishwashing liquids
possible.
516330 CleanSteamer
516338 Steamer X3-adapter
Spare parts:
516332 Lid handle insulation
516333 Steam inlet insulation
516334 Hinged lid insulation
StymoNet
Self-locking tweezers with fine-mesh stainless plastic net to fix
delicate objects such as ceramic teeth; inlays etc. during cleaning
with saturated steam.
516340 StymoNet
B | 78
O R D E R I N F O R M AT I O N S
Ceramill Multi-x
178500 Ceramill Mulit-x (complete machine)
Delivery volume: Milling / sensory unit (vertical pantograph on radial guide),
Table unit (spherical shell table), Balancing weights for the spherical shells, Foot
switch for fixation of the table (vacuum), Motor unit including collet wrench
3 mm, LED double illumination, Aspiration adapter, Connector for central or single-place aspiration, Dust protection cover (1 piece), Support plates for model
and blank 31/51, Positioning aid 31/51, Calibration plates for model and blank,
Spirit level for adjustment of the table including mounting pegs
Accessories:
178600 Ceramill Airstream 230V
(100-120V = 178600V100-V120)
Technical Data:
D/B/H: 498 x 398 x 450 mm
Required head space for moving:
560 x 480 x 450 mm
Weight: 31,5 kg
Electr. connected load:
230/115/100 V 50/60 Hz
E-fuse: T1A
Output: 125 W
Compressed air connection:
6 bar max. 50 l/min
178518
Dust protection cover for milling side, Multi-x, 2 pieces
178127
Dust protection cover for milling side, Base, 2 pieces
178139
Counterweight milling arm, 1 piece
178519
Knurled screw for scanning side
Variable engine speed:
1.000 - 35.000 min
Torque: 7,5 Ncm
Voltage of lamp connection: 12 V
Output of lamp connection: 20 W
Collet chuck: ø 3 mm
Sound level: max. 65 dbA
Tipping angle Spherical shell table:
ca. 19°
-1
Ceramill Material-Starterkit
760011
Delivery specification: see label H
Ceramill Teleskopkit Starterset
760500 Starterset
Delivery volume: Ceramill ZI TC L (12 blanks), Telescope-Kit Blank holding plate
(1 pcs.), Telescope-Kit Model holding plate (1 pcs.), Telescope-Kit Model holding
pins (1 pcs.), Ceramill Roto TCTO, Ceramill Roto TCFO, Ceramill Roto TCT1,
Ceramill Roto TCF1, Ceramill Roto TCT2, Ceramill Roto TCF2
Accessories:
760110
Ceramill ZI TC L (12 blanks)
760501 Telescope-Kit Blank holding plate (2 pcs.)
760502 Telescope-Kit Model holding plate (1 pcs.)
760503 Telescope-Kit Model holding pins (5 pcs.)
760504 Ceramill Roto TCTO
760505 Ceramill Roto TCFO
760506 Ceramill Roto TCT1
760507 Ceramill Roto TCF1
760508 Ceramill Roto TCT2
760509 Ceramill Roto TCF2
B | 79
O R D E R I N F O R M AT I O N S
Ceramill ZI – Y-TZP
For use with Ceramill Base und Multi-x
760101
!
$
!Ceramill ZI Preforms 12 blanks h = 16 mm 760102 !Ceramill ZI Preforms L 12 blanks h = 20 mm
760116 @Ceramill ZI 31 zirconium-oxide blanks,
40 x 20 x 16 mm, pack of 6 760143 #Ceramill ZI 51L zirconium-oxide blanks,
65 x 30 x 20 mm, pack of 3 760184 $Ceramill ZI 71L zirconium-oxide blank,
dental arch shape, h = 20 mm, pack of 1
760175 $Ceramill ZI 71XL zirconium-oxide blank
dental arch shape, h = 25 mm, pack of 1
H 1x
H 1x
H 2x
Blanks and frames for use with Ceramill Base
@
%
760185 %Frame for blank ZI 71 (multiple use),
pack of 1
760181 ^Ceramill ZI 77L zirconium-oxide blank
98 x 20 mm, pack of 1
760183 ^Ceramill ZI 77XL zirconium-oxide blank
98 x 25 mm, pack of 1
Blanks and frames for use with Ceramill Multi-x
760188 %Frame for blank ZI 71 (multiple use),
pack of 1
760186 ^Ceramill ZI 77L zirconium-oxide blank
98 x 20 mm, pack of 1
760187 ^Ceramill ZI 77XL zirconium-oxide blank,
98 x 25 mm, pack of 1
#
^
Ceramill Zolid
For use with Multi-x and Base
760166 &Ceramill Zolid 71 L, h = 20 mm, 1 pcs.
760167 Ceramill Zolid 71 XL, h = 25 mm, 1 pcs.
Accessories:
&
*
760998 Zolid instruction tutorial (MP4 video disc)
920150 *Atlas of Anatomy, desktop flipchart manual of
tooth forms by Knut Miller
Ceramill Stain & Glaze Kit (set of painting colours)
Stains and glaze powders for customising zirconia.
760350 Ceramill Stain & Glaze Kit, 12 pcs.
Content:
760351 Ceramill Stain yellow 4g
760352 Ceramill Stain orange 4g
760353 Ceramill Stain blue 4g
760354 Ceramill Stain grey 4g
760355 Ceramill Stain white 4g
760356 Ceramill Stain A 4g
760357 Ceramill Stain B 4g
760358 Ceramill Stain C 4g
760359 Ceramill Stain D 4g
760360 Ceramill Glaze, glaze powder 4g
760361 Ceramill Stain & Glaze Working Liquid
Liquid for mixing the stain and glaze powders 25 ml
760362 Ceramill Stain & Glaze Reflow Liquid
B | 80
Liquid for restoring the initial consistency
■ 1x
O R D E R I N F O R M AT I O N S
Holding Plates
Plastic plates for the fast clamping of plastic models ensure secure
positioning in the milling unit.
For use with Ceramill Base and Ceramill Multi-x:
760910
760919
!
#
760941
!Holding Plates Preforms pack of 50
H
@Holding Plates 31/51 – holding plates for synthetic
modelling (for use with Ceramill ZI 31/51) pack of 50 H
#Holding Plates 71/77 – holding plates for synthetic
modelling (for use with Ceramill Base und Multi-x,
suitable for Ceramill ZI 71/77) pack of 5
H
Frames for holding plate for use with Ceramill Base
$
@
760942 $Frame (multiple use) with integrated positioning
guide for holding plate, pack of 1
Frames for holding plate for use with Multi-x
760943 $Frame (multiple use) with integrated positioning
guide for holding plate 71/77 pack of 1
Positioning aids:
760971
%Positioning aid 31/51
(incl. in delivery volume of 178500)
760972 ^Positioning aid Preforms
%
H
^
Ceramill Sep
Isolates the modelling resins Ceramill Gel / Pontic from gypsum and
stump varnish (especially Giroform Die Link).
760561 Ceramill Sep
H
Ceramill Sep – Thinner and more
reliable coating, lemon-scented
Ceramill Marker
Blue, oil-based contact paste for fitting zirconium oxide crowns
(e.g. Ceramill ZI).
Ceramill Marker - Excellent adhesion
during processing with a water-cooled
laboratory turbine. Marks imperfec-tions without depositing anything.
Other colour solutions x 100 ml:
760476
Ceramill Liquid CL OR
760477
Ceramill Liquid CL GR
Accessories:
760450
Ceramill Liquid
colour jar (10 pcs.)
760478
Ceramill Liquid Brush,
Size 1 (10 pcs.)
760450
Ceramill Liquid Brush,
Size 3 (10 pcs.)
760021
Ceramill Marker
583150
Paste brush
H
Ceramill Liquid
Four dilutable, water-based, colour solutions for reliable handling
and customised staining of Ceramill ZI and Ceramill ZOLID
restorations before sintering.
760470 Ceramill Liquid complete set
H 1x
4 colour solutions à 100 ml + jars + forceps
+ Ceramill Liquid Brush (Size 1+3, 1x each size)
Colour solutions complete set:
760471
Ceramill Liquid CL1
760473
Ceramill Liquid CL3
760472
Ceramill Liquid CL2
760474
Ceramill Liquid CL4
Ceramill Liquid Eye
Code colours for Ceramill Liquid
760480 Ceramill Liquid Eye complete set, 4 x 25 ml
■ 1x
Code colours complete set:
760481
Ceramill Liquid Eye red
760483
Ceramill Liquid Eye blue
760482
Ceramill Liquid Eye green
760484
Ceramill Liquid Eye yellow
B | 81
O R D E R I N F O R M AT I O N S
Ceramill Therm
!
178350 Ceramill Therm
#
Delivery volume: Ceramill Therm sintering furnace; Sintering shell,
Sintering pearls, 200 g, Ø 1 mm
@
Accessories:
178360 !Stackable sintering bowl, 1 pcs.
178370 Ceramill ZOLID Stackable sintering bowl, 1 pcs.
■ 1x
178360 and 178370: stackable only in Ceramill Therm (178350)
Technical Data
Dimensions: 654 x 382 x 525 mm
Weight: 35 kg
Furnace chamber volume: 1,1l
Max. power consumption: 2 kW
Max. temperature: 1530°C
178361
178311
@Gripper for Sintering shell, stackable
#Sintering pearls 200 g, Ø 1 mm
for Ceramill ZI and Ceramill ZOLID
■ 1x
Ceramill Aqua
177500 Ceramill Aqua
Delivery volume: Basic unit with model table MT3; trap dish
Accessories:
177520 Worklight
177511 Technical Data:
Dimensions:
300 x 320 x 450 mm
Weight: 8,8 kg
Adapter NSK Presto Aqua
132300 NSK Presto Aqua II
Ceramill UV
Polymerisation lamp with motion sensor for rapid, reliable hardening
of modelling synthetics
Technical Data:
Polymerisation LED 600 mW,
450-470 nm
Dimensions: 145 x 300 x 30 mm
+ swan neck (app. 800 mm)
Weight: 2.6 kg
_Proximity on /o
ff switch for convenient use and freedom from glare
_Wavelength carefully matched to synthetic material for
reliable polymerisation
_Audible signal at end of controlled polymerising time means that
polymerisation can be accurately reproduced
178200 Ceramill UV
Ceramill Gel / Pontic
Light-hardening modelling synthetics for crowns and intermediate
bridge elements.
!
B | 82
@
760514 !Ceramill Gel – light-hardening synthetic modelling
material for crowns, green. Pack of 4 x 3 g H 4x
760522 @Ceramill Pontic – light-hardening synthetic modelling
material for intermediate bridge elements, blue.
Pack of 2 x 3 g
H 2x
O R D E R I N F O R M AT I O N S
Ceramill Polish – Lab Kit
!
@
Zircon oxide-polishing set for the dental technician
%
^
$
&
#
*
875500 Ceramill Polish – Lab Kit
Delivery includes: as shown in the photograph
875501 !PRE-Wheel medium (without mandrel)
wheel, grain: medium, before sintering
875502 @PRE-Cone medium
cone, grain: medium, before sintering
875503 #PRE-Wheel fine (without mandrel)
wheel, grain: fine, before sintering
875504 $PRE-Cone fine
cone, grain: fine, before sintering
875505 %POST-Disc medium
disc, grain: medium, after sintering
875506 ^POST-Wheel medium
wheel, grain: medium, after sintering
875507 &POST-Disc fine
disc, grain: fine, after sintering
875508 *POST-Wheel fine
wheel, grain: fine, after sintering
10 pcs.
10 pcs.
10 pcs.
10 pcs.
2 pcs.
4 pcs.
2 pcs.
4 pcs.
Ceramill Polish – Dent Kit
Zircon oxide-polishing set for the dentist
!
@
#
$
875509 Ceramill Polish – Dent Kit
Delivery includes: as shown in the photograph
875510 !Cup medium, cup, grain: medium
875511 @Disc medium, disc, grain: medium
875512 #Cup fine, cup, grain: fine
875513 $Disc fine, disc, grain: fine
4 pcs.
4 pcs.
4 pcs.
4 pcs.
Giroinvest Speed
724070 Giroinvest Speed Powder 5 x 4 kg bag = 20 kg
724072 Giroinvest Speed Powder 100 x 200 g bag = 20 kg
724081 Giroinvest Liquid 1 l
Giroinvest Super
781670 Giroinvest Super Powder 40 x 150 g-bag = 6 kg
781680 Giroinvest Super Powder 50 x 100 g-bag = 5 kg
781685 Giroinvest Super, 2 x 4 kg
724090 Giroinvest Super Liquid 1 l
781679 Measuring cup 100 ml
521410
Expander Casting Ring Liner 50 mm x 1 mm
Technical and physical data
Mixing ratio: 100 : 25
Mixing time: 105 s
Working time: 5 min
Initial setting: 9-11 min
Setting time: 25 min
Compression strenght after 2 h: 4-8 MPa
„Speed“ temperature: 850° C
Preheat temperature: max. 1050° C
Overall expansion: max. 4 Vol.-%
B | 83
O R D E R I N F O R M AT I O N S
!
@
BQ
BR
#
$
BS
BT
%
^
BU
CL
&
*
CM
CN
Ceramill Roto
760801 !T 4 mm
760701 @F 4 mm
760791 BR KF 2,5 mm
760892 BS KT 1,8 mm
760831 #T 3 mm 760731 $F 3 mm H 2x
760821 %T 2 mm 760721 ^F 2 mm H 2x
760811
760711
H
H
&T 1,2 mm *F 1,2 mm (
BL
CO
CP
BM
BN
CQ
CR
BO
BP
CS
CT
760840 BO CT 2 mm
760740 BP CF 2 mm
CU
DL
760891 BQ KT 2,5 mm
H
H
760809 (T 0,9 mm
760709 BL F 0,9 mm
760792 BT KF 1,8 mm
760861 BU ST2 mm
760761
CL SF 2 mm
760871 CM ST 1,2 mm
760771 CN SF 1,2 mm
760881 CO ST 0,6 mm
760781 CP SF 0,6 mm
760830 CQ UT 3 mm
760730 CR UF 3 mm
760851 BM T 0,6 mm
760751 BN F 0,6 mm
760820 CS UT 2 mm
760720 CT UF 2 mm
760819 CU TT 2 mm
760719 DL TF 2 mm
Girobond NBS
®
Packaging:
781610
Girobond NBS 781611
Girobond NBS
1.000 g
50 g
Girobond CBS
®
781690 Girobond CBS
781691
Girobond CBS
1.000 g
50 g
Girosolder
781630 Girosolder, 3,6 g
781560 Soldering Paste 18 g tin
Girocrom FH
®
721250 Girocrom FH, 1.000 g - Laboratory pack
721251
B | 84
Girocrom FH, 50 g - Trial
O R D E R I N F O R M AT I O N S
Girotan L
®
Titanium alloy (Ti6Al7Nb) is a chemically inert material that has
been used as implant material for medical indications in men since
more than 20 years already. Same degree of biocompatibility, same
low heat conductivity, and as light-weight as pure titanium. How-ever, Girotan L exceeds the strength of pure titanium by factor 3.
_Easy to work, polishable like gold
_Suitable for any indication since light-weight and highly stable
_Radiopaque, chemically neutral, low heat conductivity
_Minimum material costs, maximum benefit for the trade
Girotan L (Ti6AI7Nb-alloy):
764321 Ø 26 x 8,4 mm, 50 x 20 g-Ingots
764331
Ø 26 x 12,6 mm, 34 x 30 g-Ingots
764341 Ø 29 x 13,5 mm, 25 x 40 g-Ingots
Light weight, high stability, low heat
conductivity, good laser welding behavior.
These excellent features distinguish
Girotan L.
721141
Girotan-Laser welding wire 0,35 x 2 m
721120
Titanium welding wire 0,5 x 2 m
721121
Titanium welding wire 0,25 x 2 m
Technical and physical data:
Pure titanium and titanium alloy may only be melted with the electric arc method
under high vacuum and with argon gas protection (Ticast / Symbiocast).
Girotan L
Melting range
The bond strength between Girotan L /
Digitan and the facing porcelain corres-ponds, according to the Schwickerath test, to the values of precious
metals,
no matter if cast or milled. Creationlike esthetics.
SEM picture (magnification 650:1) showing a marginal area without alpha-case
layer (University Dental Clinic Tuebingen /
Germany, Prof. Juergen Geis-Gerstorfer /
Prof. Wolfgang Lindemann)
1.650 °C
Tensile strength Rm [MPa]
850
Proofstress Rp 0,2 % [MPa]
750
Modulus of elasticity E [GPa]
110
Elongation at rupture A [%]
>8
Vickers hardness HV 10
325
Density [g/cm ]
3
WAK [25-500°C]
4,52
-6
10,1 x 10 K
Alloy color
silver
Oxid color
grey
-1
Giroinvest T
Magnesium zirconium investments for titanium casting. The special
MgO-ZrO combination prevents reactions between the molten metal
and the investment as well as the formation of an alpha-case layer
and reliably controls the expansion, thus ensuring excellent fitting
precision.
2
_Well-coordinated expansion control for crown
and bridge work / CoCr cases
_Homogeneous mixture with distilled water
_Perfect fit without further processing
_Easy polishing, high surface density due to cold casting
764050 Giroinvest TC Powder 25 x 200 g bag = 5,0 kg
764060 Giroinvest TM Powder 20 x 180 g bag = 3,6 kg
764070 Giroinvest TD Powder 10 x 700 g bag = 7,0 kg
B | 85
O R D E R I N F O R M AT I O N S
Noflame Plus
®
116250
Noflame Plus
Delivery volume: basic unit with power cable, 2 protective covers
116210
Protective caps / 10 pcs.
Technical Data
Dimension: 195 x 85 x 83
Weight: 600 g
Mains supply: 230 V/50 Hz/130 W
Smartwax Duo
116270
Smartwax Duo, basic unit
Delivery volume: control unit with mains adaptor, handpiece with cord
(116280), probe small incl. handle (116281), cotton role holder
116280
Handpiece with cord
Technical Data
Dimension: 130 x 150 x 50
Cable length of handpiece: 1,8 m
Electrical specifications of mains adaptor: 110 - 230V 50/60 Hz
Output: 6 V, Power: 12 W
Temperature range: 50 - 220°C / 122 - 428°F – switchable
Accessories:
116281
116282
116283
116284
116285
!
@
#
$
%
^
!Probe small incl. handle
@Probe large incl. handle
#Needle incl. handle
$Beaver tail incl. handle
116286
%Knife incl. handle
^Spoon incl. handle
116229
Dental rolls, 100 pcs.
Waxjet (pat. pend. ZTM Jonas)
Intelligent solution for application of wax. The continuous wax supply
via the unique feeding mechanism of the Waxjet allows the dental
technician to quickly apply a big amount of wax. The fluidized wax
gets through the concave probe to the tip and the quantity of the wax
can be determined individually by the technician – depending on, how
quickly the wax wire is put forward with the help of the driving pulley.
_No annoying wax taking up
_For quick superficial fusing and application of wax
The Waxjet in action – e.g. during
filling of the gingivobuccal fold. Rapidly ready for use – one touch
is enough.
B | 86
116287
Waxjet incl. handle
116289
Waxjet + handpiece with cord
641060 Waxjet wire pink / 6,0 / 280 g
O R D E R I N F O R M AT I O N S
Milling Device AF350
177605 Milling Device AF350
Delivery volume: basic unit with vertical lift, milling arm with W&H motor
spindle, model table MT3, twin LED lamp, cover
Optional accessory
177998 Blockout-Upgrade-Kit AF350, adjustable, 3 parts
(for current version – see image)
Delivery volume: Blockout-Set 177990, Marking stick 17800,
Adapter sleeve AF350 adjustable 177994
177995 Blockout Upgrade-Kit AF350, 4 parts
(for previous version)
Delivery volume: Blockout-Set 177990, Adapter cord 177993,
Marker 177800, Adapter cord for Marker AF350 177806
177800 Marker
177661
W&H Collet 3 mm
Technical Data
Dimension: 340 x 250 x 450
Weight: 15 kg
Mains supply: 100/115/230 V, 50/60 Hz
Motor speed: 1.000 - 40.000 min
Torque: max. 7,5 Ncm
-1
Blockout Parallelometer AP100
177700 AP100 (without model table)
Delivery volume: basic unit with jointed arm P (177131) and marker (177800)
Optional accessory:
177360 Model table MT2
177350 Model table MT3
216291
Model table MT3 „Splitex“
177960 Blockout-Set (P. 4 | 3)
177991
Adapter cord AP100 / Diacut (for Blockout)
177450 Halogen Lamp
177071
Milling Head
Technical Data
Dimension: 210 x 180 x 400
Weight: 6,2 kg
Range of collet: 1 - 3 mm
Mains supply: 115 V/230 V – 50 Hz
Power: 22 W
B | 87
O R D E R I N F O R M AT I O N S
Blockout
Heatable blockout blades 0° to 6°, with parallelly guided plug-in
contact for handpiece connection. To be inserted into the chuck of
the marker (Ø 3 mm). Connection to any controllable voltage source
providing 24 V (e.g. 171161).
177990 Blockout and 5 inserts 0°–6°
Optional accessory
177991
Adapter cord AP100 / Diacut / Blockout
177993 Adapter cord AF350 / APF450
177806 Adapter cord for surveyor AF350
177994 Adapter cord AF350 adjustable
177980 Blockout insert 0° Ø 1,3 mm
177981
Blockout insert 0° Ø 2 mm
177982 Blockout insert 2° conic
177983 Blockout insert 4° conic
177984 Blockout insert 6° conic
177960 Blockout-set AP100 inlcuding adapter cord AP100
Starterkit for Milling Technique
Comprises, besides oil and training material, all tools required for
surveying, scraping, setting, transferring and milling tasks (all items
may be ordered separately as well).
873001 Starterkit for Milling Technique, 12 parts (as pictured)
consisting of:
177653
Training cylinder (Typ 1), MS-Milling-Training cylinder
177654 Milling example Typ 2, MS-Drill-Training cylinder
177655
Training cylinder holder MT2/3 for FM Typ 1+2
177810
Transfer Support Piston-Ø 2,35 mm
177820 Transfer Support Piston-Ø 3,0 mm
177870 Mine red 12-part, incl. carbon marker holder
177880 Mine blue 12-part, carbon marker holder
177656 Milling oil 5 x 50 ml
177830 Undercut gauge 0,25 mm, Piston-Ø 3 mm
177840 Undercut gauge 0,50 mm, Piston-Ø 3 mm
177850 Undercut gauge 0,75 mm, Piston-Ø 3 mm
171930
Plaster plate
also:
873002 Milling set 12-part
Model Table MT2 / MT3 / splitex
MT2: inclinable table, from 0° to 90°, both final positions are
under forced guidance, fixed with manual clamp lever. Plinth plate
may be magnetized.
MT3: inclination 0° to 41°, manual / electromagnetic fixation by
degrees, 0/2/4/6° also mechanical (sleeve / ring); electromagnetic
positioning.
Splitex: like MT3, however, with Splitex magnetic plate to
accept the model.
!
@
#
177360 # MT2 Model Platform / 0° - 90°
177350 @ MT3 Model table / 0° - 14°
216291
B | 88
! MT3 Model table / Splitex
KNOW-HO
RAINING COURSE
KURSWESEN
TR
A IN I NG CEN
TE
Know the technique –
master the manual skills
State-of-the-art technologies,
growing expectations of
patients and not least global
competition step up the pace
in our business sector as
well. For those who want to
meet the demands of the
market in the long run, it is
vital to be flexible and stay at
the cutting edge of technology.
The entry into the digital age
has also been accompanied by
wide-ranging changes to training requirements and we have
addressed these changes.
“Webinar” is the keyword for
an efficient learning method
for CAD-CAM courses that not
only save you an enormous
amount of effort but are mainly
held on the medium which is
used for working procedures. A
mixture of demonstrations,
training videos, live streaming
and individual consultation
enable you to use the system
immediately after 2-3 hours.
Our contact persons are available if you have any questions
or would like to register. They
ensure a smooth procedure
and that you can fully concentrate on your training at our
locations in Germany and
Austria or in the “AG training
center Middle East” in Beirut
(Lebanon).
Martina Weber
Intern. course organization
Silja Vielsack
Intern. course organization
Université Antonine
INFO
INFO
AG Training Center
Germany / Austria
AG Training Center
Middle East, Beirut (Lebanon)
Fon. +49 7231 957-221
Martina Weber
Fon. +49 7231 957-224
Silja Vielsack
Fax: +49 7231 957-249
Email: [email protected]
For information on courses held by our dealers worldwide
please contact them directly.
KH | 90
Université Antonine
Institute of Dental Laboratory
BP 40016 – Hadath, Baabda |
Lebanon
Fon +961 1877079
Mobile +961 3133911
[email protected]
R
AG
AG International Training Centers
M E D I AT H E K
The virtual font of knowledge from Amann Girrbach.
The AG Media Library is a digital archive with a concentrated
store of dental knowledge from
the contents of the old Ceramill
M-Center website, D-Lab24 and
the download area of the AG
homepage.
All the valuable knowledge of
the dental branch collected
over the years can be easily
and concisely retrieved from
the library – whether print or
video instructions on software,
hardware, specialist reports,
studies, Wikis, user cases etc.
...the Ceramill CAD Wiki and much more
The AG Media Library is available around the clock with
videos and application tutorials...
...specialist reports, studies...
KH | 91
C | 92
S | 93
SERVIC
LIVE LAB
CUSTO M ER SERVICE | TECH NICAL SERVICE | SERVICE PARTN ER
Amann Girrbach Products can only be acquired outside
of Germany and Austria from our authorised dealers
You can find a specialist dealer in your area through our worldwide network of Amann Girrbach dealers.
If you do not have an active Internet access or if you cannot find a
dealer in your area, please contact our export department at the
Amann Girrbach headquarters in Koblach, Austria:
INFOLINE
Dealer directory:
www.amanngirrbach.com/en/contact/find-dealers/
Amann Girrbach Headquarter:
Amann Girrbach AG
Fon: +43 5523 62333-0 | Fax: +43 5523 55990
E-mail: [email protected]
Authorised Amann Girrbach
service partners in your area
The authorised service companies from Amann Girrbach provide a
repair service using original Amann Girrbach machines and spare
parts. These service companies have trained personnel and the
technical information necessary for the correct and professional
repair of our machines.
If you cannot find your service company, please contact our
in-house technical service department:
INFOLINE
Technical Service/Servicepartner:
Hr. Jürgen Nachbaur
Fon: +43 5523 62333-207
[email protected]
or
www.amanngirrbach.com/en/contact/technical-service-int/
S | 94
AG LIVE LABS
Experience the practical use of equipment, materials
and systems, at a location near you
U.K.
Germany
Poland
Netherlands
Czech
Slovakia
Austria
Hungary
France
Kroatia
Romania
Belgium
Italy
Portugal
Turkey
Spain
Greece
U.S.A.
Tunisia
U.A.E.
India
Colombia
Information days are being held in certified laboratories worldwide.
They are among the leading dental laboratories in their region in
terms of size, quality, equipment and innovative capability.
Exchange of experiences between colleagues – this describes the
service provided by the new Amann Girrbach Live Labs.
Registrations and current dates are available from your
dealer or you can find a current list of all AG Live Labs at
www.amanngirrbach.com
G E N E R A L I N F O R M AT I O N
In this catalogue, the product information is restricted to some
elementary features and applications.
You will find more information in the according system brochures and/or leaflets.
3
1
Technical data
Delivery volume
Replacement parts
In general, all dimensions are
indicated in millimeters (mm)
lined up in depth/length x width
x height:
Introductory kits of systems or
basic equipment for units are
presented, on one hand, as complete set and, on the other hand,
as single articles with different
article numbers for repeat
orders.
... will be mentioned only in
cases where there is high customer demand. All replacement
parts are listed with article number in the unit’s manual.
2
1. depth
Ø in 0,1mm
2. width
3. height
L in
mm
Changes, in the sense of better
function, performance, service
life and technical improvements
are subject to alterations.
If this is not the case, the differing indications are clearly
defined (e.g. diameter = Ø,
drilling, thickness, etc.)
S | 95
A | 96
A | 97
2013 02
9MA13EN
www.hellblau.com
Headquarter
Amann Girrbach AG
Herrschaftswiesen 1
6842 Koblach, Austria
Fon +43 5523 62333-105
Fax +43 5523 62333-5119
Amann Girrbach Asia PTE.LTD.
12 Eu Tong Sen Street
#06-171 The Central
Singapore 059819 | Asia
Fon: +65 6592 5190
Fax: +65 6225 0822
[email protected]
[email protected]
www.amanngirrbach.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement