Assembly Guide WARNING 1-800-267-8494 iPad not included. the

Assembly Guide WARNING 1-800-267-8494 iPad not included. the
DCS5
DCS6
the Document Camera Stand - Assembly Guide
Assembly Guide
DCS5_DCS6_2016_A
Check out our other products online at
www.copernicused.com
WARNING
Smartphone
Paddle (1)
For assistance, please contact us:
1-800-267-8494
Email info@copernicused.com
Have your packing slip ready for reference
?
This product is meant to be assembled by an adult.
?
In its unassembled state, small parts present a hazard.
?
To be used under direct supervision of an adult.
iPad mini™
Paddle (1)
Top Arm
Pre-Assembly (1)
Headphone
Hanger (1)
Adjustment Lip
& Knob (1)
Microscope Assembly (1)
(Only included with DCS6)
Adjustable Tube
Assembly (1)
Magnetic LED Light (1)
(Only included with DCS5A&DCS6)
Base (1)
iPad® not included.
Document Camera and Microscope
Function works with most Smartphones,
iPad mini™, iPad 2™ & Newer.
Please Recycle
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
DCS5
DCS6
the Document Camera Stand - Assembly Guide
Assembly Guide
DCS5_DCS6_2016_A
Check out our other products online at
www.copernicused.com
For assistance, please contact us:
1-800-267-8494
Email info@copernicused.com
Have your packing slip ready for reference
Dear Educator,
Thank you for purchasing one of our products. I hope that Dewey - the Document Camera Stand is useful in
your classroom. If you have any questions, concerns, or ideas please contact us by telephone at 1-800-267-8494
or email at info@copernicused.com.
Enjoy using your new product and happy teaching.
Jim Phillips
Chief Cook and Bottle Washer
We do not inherit the
Change is the end result
What you leave behind is
Education is the most
earth from our ancestors,
of all true learning.
not what is engraved in
powerful weapon which
stone monuments, but
you can use to change the
what is woven into the
world.
we borrow it from our
LEO BUSCAGLIA
children.
lives of others.
NELSON MANDELA
NORTH AMERICAN
PERICLES
PROVERB
1
Year
Frame
Warranty
2
Validate Your Warranty
To validate your warranty, submit the ON-LINE form at www.copernicused.com
Enter a draw to win a Copernicus Product for your classroom at the same time!
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
Warning! Hazard Risks!
Please read the warnings below for important safety information regarding your product. Failure to
read these warnings or to follow the instructions below could result in personal injury or damage to
your product that could void your warranty.
Small
Parts
In its unassembled state, this product contains parts that can be hazardous to small children. This
product should be assembled by an adult.
This product is to be used under the supervision of an adult.
Adult
Supervision
This product is intended for indoor use only. To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. The internal components are not sealed from the environment.
Indoor Use
Only
Power Strip
Specifications
Electronic
Equipment
Read your power strip electrical specifications. Only plug in devices that are approved for use with this
power strip. Connect the supplied power strip directly to a wall outlet. Do not connect to another
power strip or use an extension cord. Unplug when not in use. Do not leave this product plugged in
for more than 72 consecutive hours. Turn off power strip before unplugging.
Read the electrical specifications of any electronic equipment you are using with your Copernicus
products. Failure to read these specifications and follow their instructions could result in damage to
your equipment or personal injury.
Ensure that any cables extending across the floor to your product are properly bundled and marked to
avoid tripping or falling which may lead to personal injury.
Cable Trip
Hazard
Do not install or use the electrical components of this unit during a lightning storm.
Electrical Shock
Do not climb on, hang from or suspend objects from any components of your product unless otherwise
specified.
Climb Hazard
3
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
DCS5
DCS6
Tips for Assembly
Watch for These Helpful Symbols
This symbol denotes a 2- or 3- Person Task. For safety, please ensure that there are the
suggested number of people working on steps displaying this symbol.
2-Person Task
3-Person Task
!
Watch for this symbol throughout the Assembly Guide. Wherever you see it, pay close
attention. The symbol denotes a step needing extra attention to ensure it is done
correctly.
The star symbol highlights an advisory note.
Before You Begin
Lay out and identify all of the included parts.
The hardware has been packed according to step.
Read the assembly guide over once to familiarize yourself with them.
!
Please note that in its unassembled state, this product contains parts that can be
hazardous to small children. This product should be assembled by an adult.
As You Assemble the Unit
Follow the steps in sequence.
Before beginning each step, find the part(s) that you need for that step.
Pay attention to the labels on the parts; they are there to help direct you at certain stages.
The title of each step states what you will be doing. Review the text and the pictures as you build
the unit.
Customer Service - FAQ’s
For missing parts and other issues regarding this product:
- The height adjust system is not working.
- The projector mount cannot be rotated.
- I lost the key to my lock box.
Please call Copernicus Customer Service, where we will be happy to help.
1-800-267-8494. Monday - Friday 8:30am - 4:30 pm EST.
OR
Email our Tech Support Service at info@copernicused.com
?
? ?
Need Tech Support?
Have a Question?
Email our Tech Support Service
Check out some of our
other great products!
www.copernicused.com
4
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
DCS5
DCS6
the Document Camera Stand - Assembly Guide
Before beginning, you should have:
Contents - Box 1
Hardware
Actual Size
In Box 1
Adjustment Lip
1x
Top Arm Pre-Assembly
1x
Positioning
Template
1x
A M6 x 20mm
1x
Portrait Position
Landscape Position
for 8.5” x 11” Paper
for 8.5” x 11” Paper
iPad
& Paper
iPad
&
Paper
B M6 x 45mm
VGA Strap
1x
Adjustable Tube
Assembly
1x
1x
Headphone Holder
2x
C M6 Lock Washer
1x
Base
1x
D M6 Nylon Washer
2x
In Box 1
In Box 1
Content - Box3
with DCS6
Content - Box2
with DCS6
Magnetic LED Light
1x
Dewey Microscope
Assembly
1x
E M6 Knob
1x
4mm Drive
Allen Key
(Not to Scale)
(43281)
1x
Additional Items Needed
Not Included
VGA
Cable
1x
5
Apple® VGA
Adapter
1x
Apple TV®
1x
iPad mini™, iPad 2™
or Newer
1x
OR
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
Smartphone
1x
Actual Size:
A M6 x 20mm
1
1x
You will need: (Not to Scale)
4mm Drive
Allen Key
(Not to Scale)
(43281)
Adjustable Tube
Assembly
1x
Base
1x
1x
Assemble the Adjustable Tube Assembly to the Base
Make sure the height adjustment
holes are facing outwards, as
seen in image.
A
Actual Size:
2
B M6 x 45mm
C M6 Lock Washer
1x
1x
You will need: (Not to Scale)
4mm Drive
Allen Key
Top Arm
1x
Headphone Holder
1x
(Not to Scale)
(43281)
1x
Assemble the Top Arm & Headphone Holder
To easily assemble the Top Arm, adjust the height of the Adjustable Tube
Assembly to the lowest position then assemble the pieces together.
B
C
The headphone holder holds
up to two headphones.
6
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
Actual Size:
3A
D M6 Nylon Washer
2x
You will need: (Not to Scale)
E M6 Knob
1x
Adjustment Lip
1x
FOR DCS5 ONLY
Attach Adjustment Lip and Knob to Top Arm Pre-Assembly.
Place threaded post of Adjustment Lip through slot and tighten Knob.
D
D
E
Actual Size:
3B
D M6 Nylon Washer
2x
You will need: (Not to Scale) Dewey Microscope
FOR DCS6 ONLY
Assembly
1x
E M6 Knob
1x
Adjustment Lip
1x
Attach Microscope Assembly to Top Arm Pre-Assembly.
Place threaded post of Adjustment Lip through slots in Top Arm Pre-Assembly
and Microscope Arm, then tighten knob.
D
D
E
7
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
Actual Size:
Paper
&
Landscape Position
iPad
& Paper
Portrait Position
Position the Paper Template (OPTIONAL)
for 8.5” x 11” Paper
Positioning Template
1x
iPad
You will need: (Not to Scale)
for 8.5” x 11” Paper
4
Pay close attention to the orientation of
iPad and 8.5”x11” paper. Then match the
edge of the paper with the indicated line
that the arrow points at. This helps to
position your paper in the middle of
your projection.
Landscape Position
for 8.5” x 11” Paper
iPad®
&
Paper
Actual Size:
5
You will need: (Not to Scale)
VGA Strap
1x
Apple® VGA
Adapter
1x
iPad mini™, iPad®2
or Newer
1x
Use VGA Strap to Hold Apple VGA Adapter in Place (OPTIONAL)
To hold the VGA cable in place, use provided VGA strap. Tie the strap around the
adapter cable and then loop over the edge of the Top Arm.
1
2
3
8
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
Actual Size:
6
You will need: (Not to Scale)
Magnetic LED Light
1x
OPTIONAL
ACCESSORY
FOR DCS6
Positioning the Magnetic LED Light (OPTIONAL ACCESSORY FOR DCS6)
Use the magnet on the LED to attach it anywhere on Dewey’s Neck.
Suggested positions to mount the
Magnetic LED Light without getting
visual hot spots on projection.
FOR DCS6 ONLY
When using the Microscope Assembly (DCS6) here are suggested locations for the LED to be mounted.
Tablet + Microscope Assembly
9
Smartphone + Microscope Assembly
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips For Use
To Change Projected Image Orientation
Holding onto top mechanism - turn iPad® 90 degrees
Portrait Position
Landscape Position
If swivel tension ever
needs to be tighter,
tighten this nut with
10mm wrench.
NOTE: Sometimes when you rotate the iPad® your projected image does not rotate, in that case you need to tilt down
the top mechanism to allow the iPad® to adjust
Changing from Document Camera to Tablet Stand Position
Holding onto top Mechanism - tilt between Document Camera Position and Stand Position
If folding tension ever
needs to be tighter,
tighten this nut & bolt
with 10mm wrench
and the provided allen
Securing Dewey to a Surface
Mount Dewey to a surface using the holes on the base.
The holes are made for 1/4” or M6 flat head
bolts/screws. Holes are countersunk.
The length and type of your hardware
depends on your surface thickness.
Mounting hardware not included.
10
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips For Use
Using Dewey with 10” iPad®
1.
2.
Pull
Loosen the M6 Knob to slide
the Adjustment Lip into the
maximum position, then
tighten.
Using Dewey with iPad mini™
1.
2.
Loosen the M6 Knob to slide
the Adjustment Lip into the
minimum position, then
tighten
Using Dewey with Smartphones
1.
2.
Smartphones must be used with Dewey in the Landscape position.
Camera on this side
11
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
- Tips For Use with Microscope Assembly
Microscope Assembly adjustments with Smartphones
Loosen knob first to allow you to move Arm in
and out to help position specimen under
camera( ).
Arm, Lens and Stage can also swivel
independently to help position specimen
in view of camera( ). Tighten knob.
To switch from using Magnifying
Arm with Smart Phone to iPad®:
Loosen knob slightly
Swing arm around to desired
location
Tighten knob
Magnifier Arm adjustments with iPad®
Loosen knob first to allow you to move Arm in
and out to help position specimen under
camera( ).
12
Arm, Lens and Stage can also swivel to
help position specimen in view of
camera( ). Tighten knob.
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips For Use
Connecting to Your Projector
For iPad mini™, iPad 2™ or newer only:
Use Apple® VGA Adapter and a VGA cord (with two VGA male
outlets) to connect projector to the iPad®.
OR Use Apple TV® to Connect wirelessly!
For Smartphones:
Use apps such as AllCast, Reflector or purchase a micro-USB
to HDMI adapter.
To hold the VGA cable in
place use provided VGA Strap
- Tie the strap around the VGA
cable and then loop over the
edge of the top arm.
(please refer to step 5)
Supported Paper Size
The Document Camera Stand covers surfaces from 13.25 x 10.0” up to 20.63” x 15.31” using the different Adjustable Tube
hole positions.
2.
Projected Area Size
in Each Hole Position
Highest Hole Position 4 - 20.63” x 15.31”
Adjust Hole Position
1. Press Valco Clip Pin In
1.
2. Pull Top Arm Up to the
Desired Position
Hole Position 3 - 17.88” x 13.19”
Hole Position 2 - 15.75” x11.63”
Lowest Hole Position 1 - 13.25” x 10.0”
Suggested Apps
Smartphones, iPad mini™, iPad 2™ Or Newer:
Board Cam
This app allows you to write on top of your image that you are projecting.
AllCast
This app lets you send photos, music, and videos on your Android to your TV! You can cast to:
Chromecast, Amazon Fire TV, Apple TV, Roku, WDTV, Samsung, Sony and Panasonic Smart Tvs
Reflector
Mirror your device on a big screen without wires or complicated setups. Play games, watch movies,
demo apps or present on the big screen from your iPhone or iPad.
Educreations
This app turns your iPad into a recordable whiteboard. It allows you to create a video tutorial.
It has voice recording, realistic digital ink, photo imports, and simple sharing features.
Nearpod
This app enables teachers to use their iPads to manage content on student’s iPads.
Teachers version manages students content and flow of lecture.
Students version receives content, participate in activities and submit responses.
Student &
Teacher Version
NOTE: If the screen of your iPad® turns off while in use, adjust sleep mode time by going to Setting>General>Auto-Lock.
And when you are not using your device put it into sleep mode.
13
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips For Use
Basic Usage Tips
1. Position stand in lowest height
2. Place your iPad
®
into the stand.
(See point 3 & 4)
If your case has a flip cover, make
sure it’s open to the side.
3. Match the openings in the top arm with the
4. Place your iPad
®
or iPad mini™ into the Top Arm.
VGA outlet on your iPad®.
Place one side first
Slide the moving part out
Place your iPad® and let go
5. For document camera function use the rear camera of your iPad .
®
6. Use Apple
®
VGA Adapter to connect your iPad® to your projector.
Use the provided VGA Strap to hold
your VGA Adapter in place and stop
it from being disconnected.
(please refer to step 5)
looking through the camera. (Optional)
&
iPad
& Paper
iPad
Portrait Position
Hold on to Top Arm during adjustment
to prevent any sudden drops
for 8.5” x 11” Paper
Valco Clip
Paper
depressing the valco clip and sliding the Adjustable Tube Assembly up/down.
for 8.5” x 11” Paper
8. The Provided template helps locate your 8.5” x 11” paper without
Landscape Position
7. Launch camera app and adjust the Top Arm to the desired height by
9. By rotating the top arm 90 degrees, change between landscape and
10. By tilting down the top arm, switch between document camera and
portrait projection.
tablet stand position.
14
DCS5_DCS6 - Version A - Released September 7th, 2016 - Copernicus Educational Products Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising