vigor2930 series
Broadband
VIGOR2930 SERIES
DUAL-WAN SECURITY FIREWALL
Dual-WAN with policy-based load-balance and fail-over
Flexible bandwidth management to optimize bandwidth usage
Object-based firewall preventing external attacks and simplifying the Internet access policy settings
Hardware-based VPN platform for high performance remote data access
802.11n (Draft-n) improves wireless speed and coverage
VoIP capabilities with twin analogue phone ports, one ISDN port dedicated to ISDN phone and one ISDN port
configurable for ISDN phone / line
The Vigor2930 is a dual-WAN router with policy-based loadbalance, fail-over and BoD (Bandwidth on Demand); it also
features advanced bandwidth control mechanisms such as
IP-layer QoS, NAT session limitation, bandwidth borrowed, etc.,
to allow easy, flexible and reliable access control and bandwidth
management.
The SPI (Stateful Packet Inspection) firewall uses object-based
design to make settings of firewall policies easy. The CSM
(Content Security Management) feature enables more precise and
efficient access control for IM (Instant Messenger) and P2P (Peer
to Peer) applications. Furthermore, functions such as DoS / DDoS
(Denial of Service / Distributed DoS) and URL / Web content
filtering minimize security threats both inside and outside the
network.
With hardware-based implementation of the VPN protocols, the
Vigor2930 supports up to 100 VPN tunnels in compliance with
advanced protocols such as IPSec / PPTP / L2TP / L2TP over
IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1
for authentication.
Vigor2930 "n" models conform to IEEE 802.11n Draft-n
standards. They support WEP / WPA / WPA2 encryption, MAC
address control, wireless LAN isolation, wireless VLAN and
802.1X authentication. The wireless rate control function can
adjust the data rate of each wireless station (client). WDS can
help users to extend wireless coverage easily.
Vigor2930 “V” models provide twin analogue phone ports. “S”
models support two ISDN ports. Combining the characteristics
of “V” and “S” models, “VS” models can offer two ISDN ports
additionally besides analogue phone ports. ISDN S0 port is
dedicated to for ISDN phone; another ISDN port is configurable
for ISDN line and phone. It supports multiple SIP registrars with
highly flexible configuration and call handling options.
Dual-WAN
Outbound Policy-Based Load-Balance
BoD (Bandwidth on Demand)
WAN Connection Fail-over
WAN Protocol
DHCP Client
Static IP
PPPoE
PPTP
L2TP*
BPA
VIGOROUS BROADBAND ACCESS
Firewall
CSM (Content Security Management) for IM / P2P Applications
Multi-NAT, DMZ Host, Port-Redirection and Open Port
Policy-based Firewall
MAC Address Filter
SPI (Stateful Packet Inspection)
DoS / DDoS Prevention
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC address
Wireless Access Point (for n model)
IEEE802.11n Compliant
Wireless Client List
Access Point Discovery
WDS (Wireless Distribution System)
Wireless LAN Isolation
Wireless Rate-Control
64/128-bit WEP
WPA/WPA2
802.1X Authentication with RADIUS Client
Hidden SSID
MAC Address Access Control
Multiple SSIDs
Content Filter
URL Keyword Blocking (White List and Black List)
Java Applet, Cookies, Active X, Compressed, Executable,
Multimedia File Blocking
Web Content Filter (SurfControl)
Time Schedule Control
Firmware Upgradeable
VoIP (for V model)
Protocol: SIP, RTP / RTCP
One Dozen SIP Registrars
G.168 Line Echo-cancellation
Automatic Gain Control
Jitter Buffer (125ms)
Voice Codec:
G.711 A / u law
G.723.1
G.726
G.729 A / B
VAD / CNG
Tone Generation and Detection: DTMF, Dial, Busy,
Ring Back, Call Progress
DTMF Tone :
In Band / Out Band (RFC-2833) / SIP Info
FAX / Modem Support :
G.711 Pass-Through
T.38 for FAX
Supplemental Services :
Call Hold / Retrieve
Call Waiting
Call Waiting with Caller ID
Call Transfer
Call Forwarding (Always, Busy and No Answer)
DND (Do Not Disturb)
Call Barring (Incoming / Outgoing)
MWI (Message Waiting Indicator) (RFC-3842)
Hotline
ISDN Loop-Through (VS model only)
ISDN On-Net/Off-Net (VS model only)
Network Management
Web-based User Interface (HTTP / HTTPS)
Quick Start Wizard
CLI (Command Line Interface, Telnet / SSH*)
Administration Access Control
Configuration Backup / Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP / FTP
Logging via Syslog
SNMP Management MIB-II
Network Features
DHCP Client / Relay / Server
Port-based VLAN
Dynamic DNS
NTP Client
Call Scheduling
RADIUS Client
DNS Cache /Proxy
UPnP
Routing Protocol:
Static Routing
RIP V2
VPN
Up to 100 VPN Tunnels
Protocol : PPTP, IPSec, L2TP, L2TP over IPSec
Encryption : MPPE and Hardware-based AES / DES / 3DES
Authentication : Hardware-based MD5, SHA-1
IKE Authentication : Pre-shared Key and Digital Signature (X.509)
LAN-to-LAN, Teleworker-to-LAN
DHCP over IPSec
NAT-Traversal (NAT-T)
Dead Peer Detection (DPD)
VPN Pass-Through
ISP 1
Internet
ISP 2
991-9293000-00
Trademarks and brand names are the properties of their respective owners.
The scope of delivery and other details are subject to change without prior notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement