DATASHEET NetScreen Series Security Systems Product Overview The NetScreen Series is a line of purpose-built, high-performance security systems designed for large enterprise, carrier, and data center networks. Architected with both existing and future network design in mind, the NetScreen Series consists of two platforms: the 2-slot NetScreen-5200 and the 4-slot NetScreen-5400. Integrating firewall, VPN, traffic management functionality, Denial of Service (DoS) and Distributed Denial of Service (DDoS) protection in a low profile modular chassis, the NetScreen Series delivers scalable performance for the most demanding network environments. Product Description The Juniper Networks® NetScreen Series Security Systems are ideally suited for large enterprise network backbones, including: • Departmental or campus segmentation • Enterprise data centers for securing high-density server environments • Carrier-based managed services or core infrastructure Offering excellent scalability and flexibility while providing high levels of security, the NetScreen Series is differentiated by its chassis configuration for fans, power supplies, and number of slots for modules. Both the Juniper Networks NetScreen-5200 and Juniper Networks NetScreen-5400 support secure port modules that offer different throughput and interface options for deployment flexibility. All chassis are designed with hotswappable, redundant fans and power supplies. This enables businesses to maximize device uptime and meet stringent government and industry certifications, such as the rigorous Network Equipment Building System criteria, the requirement for equipment used in the central office in the North American Public Switched Network. Employing a switch fabric for data exchange and separate multi-bus channel for control information, the NetScreen Series can scale up to 30 Gbps firewall and 15 Gbps 3DES/AES VPN. It provides low-latency performance for all packet sizes and is ideal for multimedia, VoIP, and other streaming media applications. Juniper Networks delivers all the components necessary to build and secure a highly available infrastructure. Redundant links for full-mesh topologies, sub-second stateful fail-over, path monitoring, and a secured control protocol all join to provide complete resilience for the security layer. The NetScreen Series also supports Juniper Networks virtual systems capability, with capacity up to 500 virtual systems. Virtual systems allow a single security device to be partitioned logically into multiple security domains, each with a unique virtual router, policy set, address book, and administrative login. Virtual systems can be used with physical interfaces, as well as VLAN tagged interfaces bound to any interface, with multiple security zones supported within each virtual system. 1 Whether the requirement is high-capacity session/tunnel aggregation, high-performance small-packet throughput, a high degree of system virtualization or a high degree of physical segmentation, the NetScreen Series is the ideal platform for large enterprise and carrier grade networks. The additional benefits associated with lower total cost of ownership and the ability to meet future service or application requirements make the NetScreen Series firewall/VPN the clear choice for network security operations. Juniper Networks further expands overall system functionality and performance by introducing a new management module and three new secure port modules (SPMs) for the NetScreen Series. The new management module takes advantage of faster CPU speeds and larger CPU cache to enhance performance while the new SPMs take advantage of Juniper’s fourth generation security ASIC to deliver advanced functionality at multi-gigabit rates. These new management and SPM modules deliver the Juniper heritage of high-performance security while expanding capabilities and capacities for NetScreen Series customers. Features and Benefits Feature Feature Description Benefit Purpose-built platform Modular, chassis-based security systems. Delivers the high performance and configuration flexibility required to protect large enterprise and carrier environments. High performance ASIC based architecture employs a switch fabric for data exchange and a separate multi-bus channel for control information. Ensures scalable performance and low latency in sensitive applications such as VoIP and streaming media. Advanced network segmentation Security zones, virtual LANs and virtual routers allow administrators to deploy security policies to isolate guests, regional servers, or databases. Prevents unauthorized access, contains any attacks that may occur, and facilitates regulatory compliance. System and network resiliency Hardware component redundancy and full mesh configurations enable redundant physical paths in the network. Provides the reliability required for high-speed network deployments. High availability (HA) Active/passive, active/active and active/active full mesh HA configurations using dedicated high availability interfaces. Achieve maximum availability and ensure synchronization for sub-second failover between interfaces or devices. Interface flexibility Modular architecture enables deployment with a wide variety of interface options, including SFP (SX, LX, TX) and XFP 10 gigabit (SR or LR). Simplifies network integration and helps reduce the cost of future network upgrades. Robust routing engine The NetScreen Series routing engine supports OSPF, BGP, RIP v1/2, transparent Layer 2 operation, NAT and Route mode. Facilitates the deployment of the NetScreen Series as a combined security and LAN routing device, lowering operational and capital expenditures. Virtual system support Supports up to 500 virtual firewalls – each with a unique set of administrators, policies, VPNs, and address books. Reduces the number of physical units and allows the partitioning of the network into separate administrative domains. World-class professional services From simple lab testing to major network implementations, Juniper Networks Professional Services will collaborate with your team to identify goals, define the deployment process, create or validate the network design, and manage the deployment. Transforms the network infrastructure to ensure that it is secure, flexible, scalable, and reliable. Option Option Description Applicable Products Integrated IPS (Deep Inspection) Prevents application level attacks from flooding the network using a combination of stateful signatures and protocol anomaly detection mechanisms. IPS is annually licensed. NetScreen-5200 and NetScreen-5400 Web filtering (redirect) Block access to malicious Web sites using a Web filtering redirect solution such as SurfControl or Websense technology. NetScreen-5200 and NetScreen-5400 Virtual systems Supports up to 500 virtual firewalls—each with a unique set of administrators, policies, VPNs, and address books. NetScreen-5200 and NetScreen-5400 Product Options 2 NetScreen-5400 NetScreen-5200 Specifications NetScreen-5200 Maximum Performance and Capacity ScreenOS® Software version tested NetScreen-5400 1 ScreenOS 6.2 ScreenOS 6.2 Firewall performance (large packets) 10/8 Gbps 30/24 Gbps Firewall performance (small packets) 4 Gbps 12 Gbps Firewall Packets Per Second (64 byte) 6 M PPS 18 M PPS AES256+SHA-1 VPN performance 5/4 Gbps 15/12 Gbps 2 2 3DES+SHA-1 VPN performance2 5/4 Gbps Maximum concurrent sessions 1,000,000 2,000,000(9, 10) New sessions/second 26,500/22,000 26,500/22,000 Maximum security policies 40,000 40,000 Maximum users supported Unrestricted Unrestricted Fixed I/O 0 0 Interface expansion slots 2 (1 x Management, 1 x SPM) 4 (1 x Management, 3 x SPM) LAN interface options 8 mini-GBIC (SX, LX or TX), or 2 XFP 10GB (SR or LR) 8 mini-GBIC (SX, LX or TX), or 2 XFP 10GB (SR or LR) Network attack detection Yes Yes Denial of Service (DoS) and Distributed Denial of Service (DDoS) protection Yes Yes TCP reassembly for fragmented packet protection Yes Yes 3 11 15/12 Gbps (9, 10) Network Connectivity Firewall Brute force attack mitigation Yes Yes SYN cookie protection Yes Yes Zone-based IP spoofing Yes Yes Malformed packet protection Yes Yes Unified Threat Management / Content Security4 IPS (Deep Inspection firewall) Yes Yes Protocol anomaly detection Yes Yes Stateful protocol signatures Yes Yes IPS/Deep Inspection attack pattern obfuscation External URL filtering5 Yes Yes Yes Yes 3 Specifications (continued) NetScreen-5200 NetScreen-5400 VoIP Security H.323 ALG Yes Yes SIP ALG Yes Yes MGCP ALG Yes Yes SCCP ALG Yes Yes NAT for VoIP protocols Yes Yes Concurrent VPN tunnels3 Up to 25,000 Up to 25,000 Tunnel interfaces IPsec VPN Up to 8,191 Up to 8,191 DES (56-bit), 3DES (168-bit) and AES encryption Yes Yes MD-5 and SHA-1 authentication Yes Yes 3 Manual key, IKE, PKI (X.509), IKEv2 with EAP Yes Yes Perfect forward secrecy (DH Groups) 1,2,5 1,2,5 Prevent replay attack Yes Yes Remote access VPN Yes Yes L2TP within IPsec Yes Yes IPsec NAT traversal Yes Yes Redundant VPN gateways Yes Yes User Authentication and Access Control Built-in (internal) database - user limit3 Up to 50,000 Up to 50,000 Third-party user authentication RADIUS, RSA SecurID, and LDAP RADIUS, RSA SecurID, and LDAP RADIUS Accounting Yes – start/stop Yes – start/stop XAUTH VPN authentication Yes Yes Web-based authentication Yes Yes 802.1X authentication Yes Yes Unified access control enforcement point Yes Yes Yes Yes PKI Support PKI Certificate requests (PKCS 7 and PKCS 10) Automated certificate enrollment (SCEP) Yes Yes Online Certificate Status Protocol (OCSP) Yes Yes Certificate Authorities supported VeriSign, Entrust, Microsoft, RSA Keon, iPlanet (Netscape) Baltimore, DoD PKI VeriSign, Entrust, Microsoft, RSA Keon, iPlanet (Netscape) Baltimore, DoD PKI Self-signed certificates Yes Yes Maximum number of virtual systems 0 default, upgradeable to 500 0 default, upgradeable to 500 Maximum number of security zones 23 default, upgradeable to 1,023 23 default, upgradeable to 1,023 Maximum number of virtual routers 3 default, upgradeable to 503 3 default, upgradeable to 503 Maximum number of VLANs 4,093 4,093 Inter-VSYS Communication (shared-DMZ) Yes Yes BGP instances 128 128 BGP peers 256 256 BGP routes 30,000 30,000 OSPF instances Up to 8 Up to 8 OSPF routes 30,000 30,000 Virtualization6 Routing 4 Specifications (continued) NetScreen-5200 NetScreen-5400 Routing (continued) RIP v1/v2 instances Up to 512 Up to 512 RIP v2 routes 30,000 30,000 Dynamic routing Yes Yes Static routes 30,000 30,000 Source-based routing Yes Yes Policy-based routing Yes Yes ECMP Yes Yes Multicast Yes Yes Reverse Path Forwarding (RPF) Yes Yes IGMP (v1, v2) Yes Yes IGMP Proxy Yes Yes PIM SM Yes Yes PIM SSM Yes Yes Multicast inside IPsec tunnel Yes Yes Syn-Cookie and Syn-Proxy DoS Attack Detection Yes Yes SIP, RTSP, Sun-RPC, and MS-RPC ALG’s Yes Yes Dual stack IPv4/IPv6 firewall and VPN Yes Yes IPv4 to/from IPv6 translations and encapsulations Yes Yes IPv6 Virtualization (VSYS, Security Zones, VR, VLAN) Yes Yes RIPng Yes Yes BGP version 4 Yes Yes DHCPv6 Relay Yes Yes NSRP (active/passive, active/active) Yes Yes Transparent mode for IPv6 Yes Yes Layer 2 (transparent) mode7 Yes Yes Layer 3 (route and/or NAT) mode Yes Yes Network Address Translation (NAT) Yes Yes Port Address Translation (PAT) Yes Yes Policy-based NAT/PAT Yes Yes Mode of Operation Address Translation Mapped IP (MIP) 20,000 20,000 Virtual IP (VIP) 64 64 MIP/VIP grouping Yes Yes Static Yes Yes DHCP, PPPoE client No, No No, No Internal DHCP server No No DHCP relay Yes Yes 8 IP Address Assignment 5 Specifications (continued) NetScreen-5200 NetScreen-5400 Traffic Management Quality of Service (QoS) Guaranteed bandwidth No No Maximum bandwidth Yes – per physical interface only Yes – per physical interface only Ingress traffic policing No No Priority-bandwidth utilization No No DiffServ marking Yes – per policy Yes – per policy Jumbo frames Yes Yes Link aggregation up to 4 ports 8G2 SPM only 8G2 SPM only Yes Yes High Availability (HA) Active/Active Active/Passive Yes Yes Redundant interfaces 8G2 SPM only 8G2 SPM only Configuration synchronization Yes Yes Session synchronization for firewall and VPN Yes Yes Session failover for routing change Yes Yes Device failure detection Yes Yes Link failure detection Yes Yes Authentication for new HA members Yes Yes Encryption of HA traffic Yes Yes LDAP and RADIUS server failover Yes Yes System Management WebUI (HTTP and HTTPS) Yes Yes Command line interface (console) Yes Yes Command line interface (telnet) Yes Yes Command line interface (SSH) Yes Yes Juniper Networks Network and Security Manager Yes Yes All management via VPN tunnel on any interface Yes Yes Rapid deployment Yes Yes Local administrator database size 8 MB 8 MB External administrator database support RADIUS/LDAP/SecurID RADIUS/LDAP/SecurID Restricted administrative networks 6 6 Administration Root admin, admin and read only user levels Yes Yes Software upgrades Yes Yes Configuration rollback Yes Yes Logging/Monitoring Syslog (multiple servers) Yes Yes Email (two addresses) Yes Yes NetIQ WebTrends Yes Yes SNMP (v2) Yes Yes SNMP full/custom MIB Yes Yes Traceroute Yes Yes VPN tunnel monitor Yes Yes 6 Specifications (continued) NetScreen-5200 NetScreen-5400 External Flash Additional log storage Supports 1 GB or 2 GB industrial-grade SanDisk Supports 1 GB or 2 GB industrial-grade SanDisk Event logs and alarms Yes Yes System configuration script Yes Yes ScreenOS Software Yes Yes Dimensions (W x H x D) 17.5 X 3.4 X 20 in (44.5 X 8.6 X 50.8 cm) 17.5 X 8.6 X 14 in (44.5 X 21.8 X 35.6 cm) Weight 37 lb / 17 kg 45 lb / 20 kg Rack mountable Yes, 2U Yes, 5U Power supply (AC) Yes, redundant, 100-240 VAC Yes, redundant, 100-240 VAC Dimensions and Power Power supply (DC) Yes, redundant, -36 to -60 VDC Yes, redundant, -36 to -60 VDC Maximum thermal output 472 BTU/hour (W) 943 BTU/hour (W) Certifications Safety certifications UL, CUL, CSA, CB, Austel, NEBS Level 3 UL, CUL, CSA, CB, Austel, NEBS Level 3 EMC certifications FCC class A, CE class A, C-Tick, VCCI class A FCC class A, CE class A, C-Tick, VCCI class A NEBS Yes Yes MTBF (Bellcore model) 7.9 years 7.0 years Yes, MGT2 / 8G2 / 2XGE Yes, MGT2 / 8G2 / 2XGE Security Certifications Common Criteria: EAL4 and EAL4+ FIPS 140-2: Level 2 Yes, MGT2 / 8G2 / 2XGE Yes, MGT2 / 8G2 / 2XGE ICSA Firewall and VPN Yes Yes Operating temperature 32° to 105° F (0° to 45° C) 32° to 105° F (0° to 45° C) Non-operating temperature - 4° to 158° F (-20° to 70° C) - 4° to 158° F (-20° to 70° C) Humidity 10% to 90% noncondensing 10% to 90% noncondensing Operating Environment (1) Performance, capacity and features listed are based upon systems running ScreenOS 6.2 and are the measured maximums under ideal testing conditions unless otherwise noted. Actual results may vary based on ScreenOS release and by deployment. Please note the firewall/VPN performance data are identical for MGT2/SPM2 and MGT3/SPM3 configurations. For a complete list of supported ScreenOS versions for NetScreen Series Security Systems, please visit the Juniper Customer Support Center (www.juniper.net/customers/support/). (2) Listed first, higher performance numbers are achieved with 2XGE, lower numbers with the 8G2 Secure Port Modules. (3) Shared among all virtual systems. (4) IPS/Deep Inspection is delivered by annual subscriptions purchased separately from Juniper Networks. Annual subscriptions provide signature updates and associated support. (5) Redirect Web filtering sends traffic to a secondary server and therefore entails purchasing a separate Web filtering license from either Websense or SurfControl. (6) Requires purchase of virtual system key. Every virtual system includes one virtual router and two security zones, usable in the virtual or root system. (7) NAT, PAT, policy-based NAT, virtual IP, mapped IP, virtual systems, virtual routers, VLANs, OSPF, BGP, RIPv2, Active/Active HA, and IP address assignment are not available in layer 2 transparent mode. (8) Not available with virtual systems. (9) 512K or 1 million sessions per SPM can be achieved (2 ASICs per SPM), depending on inter-ASIC or intra-ASIC traffic flow respectively. 1 million sessions max on NetScreen-5200 and 2 million sessions max on NetScreen-5400. (10)Two million sessions requires at least two Secure Port Modules (8G2 or 2XGE). (11)The first numbers are performance achieved with the new MGT3/8G2-G4 modules, and the second numbers represent the performance achieved with the MGT2/8G2 modules. Juniper Networks Services and Support Juniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your highperformance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required levels of performance, reliability, and availability. For more details, please visit www.juniper.net/us/en/products-services. 7 Ordering Information Model Number Model Number Description NetScreen Series – Virtual System Upgrades NetScreen-5200 NS-5200 NS-5200-DC NS-5200 system, no SPM or MGT modules, includes fan tray, dual AC power supply, 19” rack mount, 0 VSYS NS-5000-VSYS-5 VSYS upgrade 0 to 5 NS-5000-VSYS-25 VSYS upgrade 5 to 25 NS-5200 system, no SPM or MGT modules, includes fan tray, dual DC power supply, 19” rack mount, 0 VSYS NS-5000-VSYS-50 VSYS upgrade 25 to 50 NS-5000-VSYS-100 VSYS upgrade 50 to 100 NS-5000-VSYS-250 VSYS upgrade 100 to 250 NS-5000-VSYS-500 VSYS upgrade 250 to 500 NS-5000-VSYS VSYS upgrade 0 to 500 Note: Add Management and SPM Modules to build complete systems NetScreen-5400 NS-5400 NS-5400 system, no SPM or MGT modules, includes fan tray, 3 x AC power supply, 19” rack mount, 0 VSYS NS-5400-DC NS-5400 system, no SPM or MGT modules, includes fan tray, 3 x DC power supply, 19” rack mount, 0 VSYS Note: Add Management and SPM Modules to build complete systems NetScreen Series – Components needed to build complete systems NS-5000-MGT2 Management Module 2 NS-5000-2XGE 2 x 10GbE Secure Port Module (SPM) – does NOT include transceivers NS-5000-8G2 8 x GbE Secure Port Module 2 (SPM) – includes 8 x transceivers (SX) NS-5000-8G2-TX 8 x GbE Secure Port Module 2 TX (SPM) – includes 8 x Gig copper transceivers NS-5000-MGT31 Management Module 3 NS-5000-2XGE-G41 2 x 10GbE Secure Port Module (SPM) – does NOT include transceivers NS-5000-8G2-G41 8 x GbE Secure Port Module (SPM) – includes 8 x transceivers (SX) NS-5000-8G2-G4-TX2 8 x GbE Secure Port Module (SPM) – includes 8 x Gig copper transceivers 2 1 2 The NS-5000-MGT3, NS-5000-2XGE-G4, NS-5000-8G2-G4, and NS-5000-8G2-G4 TX modules require ScreenOS version 6.1 or higher and CANNOT be intermixed with prior generation management or SPM modules. Customer who wish to deploy NetScreen Series systems with the latest Management Module 3 must also deploy the latest G4 SPM modules. Only rates of 1 Gbps/Gigabit Ethernet supported (10/100 Mbps not supported). NetScreen Series – Accessories NS-SYS-GBIC-MSX SX transceiver (mini-GBIC) NS-SYS-GBIC-MLX LX transceiver (mini-GBIC) NS-SYS-GBIC-MXSR XFP 10GbE transceiver Short Range (SR) (300 m) NS-SYS-GBIC-MXLR XFP 10GbE transceiver Long Range (LR) (10 km) NetScreen-5200 – Components NS-5200-CHA NetScreen-5200 chassis NS-5200-PWR-AC NetScreen-5200 AC power supply NS-5200-PWR-DC NetScreen-5200 DC power supply NS-5200-FAN NetScreen-5200 fan assembly NetScreen-5400 – Components NS-5400-CHA NetScreen-5400 chassis NS-5400-PWR-AC NetScreen-5400 AC power supply NS-5400-PWR-DC NetScreen-5400 DC power supply NS-5400-FAN NetScreen-5400 fan assembly About Juniper Networks Juniper Networks is in the business of network innovation. From devices to data centers, from consumers to cloud providers, Juniper Networks delivers the software, silicon and systems that transform the experience and economics of networking. The company serves customers and partners worldwide. Additional information can be found at www.juniper.net. Corporate and Sales Headquarters APAC Headquarters EMEA Headquarters Juniper Networks, Inc. Juniper Networks (Hong Kong) Juniper Networks Ireland 1194 North Mathilda Avenue 26/F, Cityplaza One Airside Business Park Sunnyvale, CA 94089 USA 1111 King’s Road Swords, County Dublin, Ireland Phone: 888.JUNIPER (888.586.4737) Taikoo Shing, Hong Kong Phone: 35.31.8903.600 or 408.745.2000 Phone: 852.2332.3636 EMEA Sales: 00800.4586.4737 Fax: 408.745.2100 Fax: 852.2574.7803 Fax: 35.31.8903.601 www.juniper.net Copyright 2011 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. 1100007-008-EN Dec 2011 8 Description Printed on recycled paper To purchase Juniper Networks solutions, please contact your Juniper Networks representative at 1-866-298-6428 or authorized reseller.