Comprehensive CDA HD100 HDMI Amplifier Splitter User manual

HDMI AMPLIFIER SPLITTER 1×2
USER MANUAL
CDA -HD100
Table of Contents
1.0 Introduction………………………………………………….….2
2.0 Specifications…………………………………….………..……2
3.0 Package Contents………………………………………….…..3
4.0 Panel Descriptions…………………………………….…….…3
5.0 Connection and Operation..................................................4
Cable
１
and
Connectivity
Company
HDMI AMPLIFIER SPLITTER 1×2
HDMI AMPLIFIER SPLITTER
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This HDMI Amplifier Splitter is an HDMI splitter with two outputs. It distributes the
input of the HDMI signal into the two identical outputs simultaneously. This
product has the ability of buffering and amplifying. Each amplifier splitter’s output
can achieve long distance transmission of HDMI signal of more than 15 meters.
When two or more products are cascaded, they can create a larger distribution
and longer in length.
The HDMI Amplifier Splitter offers solutions for HDTV retail and show site, HDTV,
STB, DVD and Projector factory, noise, space and security concerns, data center
control, information distribution, conference room presentation, school and
corporate training environments.
1.1 FEATURES
This HDMI Amplifier Splitter has many features that enable it to perform in a
superior manner. Among those features you will find:
 Easy to Use: Install in seconds, no need of setting.
 Cascaded: Large distribution achieved by cascading the HDMI Amplifier
Splitter.
 Supports highest video resolution 1080p.
 Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth.
 Supports 8bit per channel (24bit all channel) deep color.
 Supports HDCP.
 Supports uncompressed audio such as LPCM
 Supports compressed audio such as DTS Digital, Dolby Digital（including

DTS-HD and Dolby True HD）
Support 3D all format, including [email protected]/24Hz,
[email protected]/60Hz/50Hz, bandwidth up to 165MHz.
2.0 SPECIFICATIONS
Signal Inputs/Output
Input DDC Signal
Maximum Single Link Range
5 volts p-p (TTL)
1920X1080p
２
HDMI AMPLIFIER SPLITTER 1×2
Output Video
Operating Frequency
Vertical Frequency Range
Video Amplifier Bandwidth
Resolutions(HDTV)
Interlaced(50&60Hz)
Progressive(50&60Hz)
Mechanical
Size(L-W-H)
Weight(Net)
Warranty
Limited Warranty
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Requirement
External Power Supply
Power consumption (Max)
Regulatory Approvals
Converter Unit
Power Supply
Accessories Adapter
AC Power Adapter
User Manual
HDMI
50/60Hz
1.65Gbps/165MHz
480i,576i,1080i
480p,576p,720p,1080p
86×44×16mm
42g
1 Year Parts and Labor
0℃ to +70℃
10% to 85 % RH (no condensation)
-10℃ to +80℃
5% to 90 % RH (no condensation)
5V DC@2A,
5W
FCC,CE,UL
UL,CE,FCC
US standard, UK standard and so on
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit.
2) 5V DC Power Supply.
3) User’s Manual.
4.0 PANEL DESCRIPTIONS
３
HDMI AMPLIFIER SPLITTER 1×2
HDMI Output
HDMI Output
HDMI Input
DC/5V
5.0 CONNECTION AND OPERATION
1) Connect the HDMI input source and output devices into the HDMI Amplifier
Splitter. (HDMI cables are optional)
*please refer to the connection diagram section.
2) Insert the DC side of 5v power supply into it and then connect the AC side of
the power supply into the wall outlet.
3) Turn on the power.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
４
">