ICP Accelerometer Signal Splitter

ICP Accelerometer Signal Splitter
AUDIOKREATE, INC.
MODEL SSP-40
Audio and Vibration Solutions
ICP Accelerometer Signal Splitter
The ICP Accelerometer Signal Splitter allows an ICP Signal to be connected directly to two recording devices, overcoming the 15 DC volt bias requirement
necessary to power the accelerometers. This 15 volts can exceed many acquisition units input maximums and even when set to AC coupling can damage circuits or provide erroneous signals by exceeding the ± 10 input voltage limits.
The SPL-40 removes the bias and provides a secondary or backup recorder an
AC coupled 0 volt bias signal.
Can be configured in rack
mounted units of 8 channels
per row.
Individual separate units
also available.
Provides a 0 Volt bias signal
to backup recorders.
Specifications:
Input Voltage ±50 V
Frequency Response >20KHz.
Input Impedance: >10K ohms
Overcomes the 15 volt bias on ICP Accelerometers and allows multiple recorders to be directly connected.
Non-powered
Engineering
AudioKreate, Inc.
985 Park Ln
Santa Barbara, CA 93108
Phone: 650.464.6060
408.482.1852
E-mail: [email protected]
Manufacturing
Consulting
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement