NOTE: Before you can use the printer, you must read the Quick Start Guide and User Manual + NOTE ON (15 mins) 2 Opening the front door pauses the ongoing print job. To resume, close the font door and double click . Opening the top door will not pause the printer. / OF F If the printer runs of of ﬁlament while printing, it will automatically pause. Load new ﬁlament and double press resume . If there is a loss of power while printing, use the software to initialize the printer and resume the print. Do not remove the perf board before attempting to resume the print. If printing with PLA and the room temperature exceeds 85° F (30° C), print with the top door open to reduce the potential issues while printing. Yellow Pulsing: Printer switched on waiting to be initialized Green Pulsing: Printer initialized waiting for job Blue Letter Rotation: Fast - Print job spooling Slow - Printing Blue Pulsing: Printing Paused Red Pulsing: Error Single letter remains on: 0% R For further explanation check the manual 50% 100% Table pre-heating progress or print progress during printing WARNINGS PRINTER MAINTENANCE Lubricate the rails that form the print head gantry system every 4-6 months or as needed. Refer to the User's Manual for details. Replace the HEPA ﬁlter after 300 hours of use or every 6 months, whichever happens ﬁrst. The ﬁlter is inside the round ﬁlter cover with the white trim located to the left of the platform . Refer to the User's Manual for details. SUPPORT If you encounter any issues, have any questions, feature requests, or feedback for our support team, please contact your local reseller. [email protected]ﬁnia.com Software, FAQs & updates www.aﬁnia.com/support Turn oﬀ the printer and unplug the power before performing any service on the printer such as removing parts, cables or covers. Contact Technical Support for instructions. Always have adult supervision when children are are present. Small printed parts may be choking hazards -please keep small parts from children. US (952) 279-2643 (M-F 8-5 CT) Japan 03-3561-2266 Make sure to tie back loose clothing and long hair while the printer is in operation.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project