Keysight Technologies Infiniium V

Keysight Technologies Infiniium V
Keysight Technologies
Infiniium V-Series Oscilloscopes
8 to 33 GHz
Data Sheet
02 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Table of Contents
Achieve Clarity Faster with Infiniium V-Series Oscilloscopes��������������������������������������������������������������������03
Achieve Clarify Faster with the Best-in-class Infiniium V-Series Oscilloscopes���������������������������������������06
Industry’s Best Signal Integrity�������������������������������������������������������������������������������������������������������������������08
Industry’s Fastest Mixed Signal Oscilloscope��������������������������������������������������������������������������������������������� 10
Industry’s Leading Hardware Serial Trigger������������������������������������������������������������������������������������������������ 11
Industry’s Most Advanced and Flexible 30-GHz Probing System������������������������������������������������������������� 13
Industry’s Most Advanced Probing System������������������������������������������������������������������������������������������������ 14
Industry’s Most Comprehensive Software�������������������������������������������������������������������������������������������������� 16
Achieve Clarify Faster - Frequency Domain Performance������������������������������������������������������������������������� 24
Most Advanced Platform�����������������������������������������������������������������������������������������������������������������������������26
Keysight Infiniium Oscilloscope Portfolio����������������������������������������������������������������������������������������������������27
Infiniium V-Series Ordering Configuration��������������������������������������������������������������������������������������������������28
Ordering Configuration��������������������������������������������������������������������������������������������������������������������������������33
Infiniium V-Series Performance Characteristics�����������������������������������������������������������������������������������������34
Evolving Since 1939������������������������������������������������������������������������������������������������������������������������������������� 47
03 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Achieve Clarity Faster with Infiniium V-Series Oscilloscopes
Groundbreaking oscilloscope technology
Fastest analysis and enhanced usability
The Keysight Technologies, Inc. Infiniium V-Series oscilloscopes
incorporate innovative technology designed to deliver superior
measurements. Whether you are testing multiple high-speed
serial lanes or a massive parallel bus, the new 12.5 Gb/s,
industry’s longest 160-bit hardware serial trigger and world’s
fastest 20 GSa/s digital channels will provide timely validation
and debug. Our oscilloscope’s low-noise front end technology,
advanced InfiniiMax III/III+ Series probes and revolutionary
voltage termination adapter provide up to 33 GHz performance
with the industry’s best signal integrity. Together with the
broadest software solution coverage, the V-Series helps you
achieve clarity faster in your design characterization to ensure
your product ships on time.
We put the groundbreaking oscilloscope technology in an
innovate industrial design frame with a standard 500 GB
removable solid state drive and high-powered motherboard for
fastest analysis, capacitive 12.1” display for multi-touch usability
and USB 3.0 ports for fast data offload speed. Coupled with the
next-generation Infiniium user interface, the V-Series makes
displaying, analyzing and sharing information much easier. It is
the first user interface to take advantage of multiple displays
and touch screens. It features up to 8 waveform windows with up
to 16 grids in each of them, allowing 128 simultaneous viewing
spaces.
DSO models
4 analog
channels
DSOV334A
DSOV254A
DSOV204A
DSOV164A
DSOV134A
DSOV084A
DSA models
4 analog
channels
DSAV334A
DSAV254A
DSAV204A
DSAV164A
DSAV134A
DSAV084A
MSO models
4 analog channels +
16 digital channels
MSOV334A
MSOV254A
MSOV204A
MSOV164A
MSOV134A
MSOV084A
Analog bandwidth
Sample rate
2 channels 4 channels 2 channels 4 channels
Max memory
4 channels
Bandwidth upgradability
33 GHz
25 GHz
20 GHz
16 GHz
13 GHz
8 GHz
2 Gpts
2 Gpts
2 Gpts
2 Gpts
2 Gpts
2 Gpts
Yes. Each model is
upgradable to each
higher bandwidth step
or the max bandwidth of
33 GHz.
16 GHz
16 GHz
16 GHz
16 GHz
13 GHz
8 GHz
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
04 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Achieve Clarity Faster with Infiniium V-Series Oscilloscopes (Continued)
Industry’s most advanced probing system
Infiniium V-Series’ low-noise front end and the revolutionary
voltage termination adapter provide the industry’s best signal
integrity.
Keysight’s proprietary and custom front-end technology yields
the industry’s lowest noise floor and jitter measurement floor of
real-time oscilloscope hardware available today.
The InfiniiMax III and III+ probing systems provide unmatched
signal fidelity and bandwidth performance up to 30 GHz to meet
today’s high-speed signal probing requirements.
–– Lowest noise and flattest frequency response
–– Unique S-parameters stored in each probe, automatically
downloaded to the scope for correction
–– PrecisionProbe for most accurate correction to the probe tip
–– InfiniiMode feature allows differential, single-ended and
common mode measurements without probe reconnection
–– First magnetically engaged probe for secure connection
–– Lowest-noise active voltage termination adapter
–– Industry’s only bandwidth upgradable probes
05 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Achieve Clarity Faster with Infiniium V-Series Oscilloscopes (Continued)
Industry’s most comprehensive software solution
Industry’s best signal integrity for superior
measurement accuracy
The Infiniium V-Series family has the best-in-class signal
integrity real-time oscilloscopes in the industry, delivering
the most margin for your design validation. They are ideal for
spectral analysis of transients and wideband RF applications.
–– True analog bandwidth to 33 GHz
–– Lowest noise floor (2.10 mV at 50 mV/div, 33 GHz)
–– Lowest intrinsic jitter (100 fs)
–– Highest Effective Number Of Bits (ENOB) values in excess of
5.5
–– Flattest frequency magnitude and phase response
–– Spurious Free Dynamic Range (SFDR) exceeding 50 dBc
The V-Series has the deepest and broadest range of software
solutions to accelerate understanding of your signal performance
from fundamental analysis to debug and compliance.
–– Analysis tools including jitter separation (Dual-Dirac, tail-fit,
BUJ), eye-diagram, advanced de-embedding, FFE/CTLE/
DFE equalizations and crosstalk analysis
–– World’s fastest digital channels, ideal for DDR4/LPDDR4
trigger and decode as well as parallel bus validation
–– Debug with industry’s longest 160-bit, 12.5 Gb/s hardware
serial trigger, PRBS error detector and zone touch trigger
–– Compliance software and technical expertise for high-speed
standards (USB 3.1, PCIe ® Gen 4, HDMI 2.0, MIPI®, Ethernet
100G, PAM-4, etc.) for highest measurement confidence
06 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Achieve Clarify Faster with the Best-in-class Infiniium V-Series Oscilloscopes
33 GHz true analog bandwidth and 80 GSa/s
sample rate with ultra low-noise, intrinsic
jitter and highest ENOB.
Capture the longest signal trace of up
to 25 ms at 80 GSa/s sample rate using
highest 2 Gpts of acquisition memory.
Find rare events with the industry’s longest
160-bit, 12.5 Gb/s hardware serial trigger and
PRBS error detector.
Increase your productivity with the
next-generation Infiniium user interface,
optimized for multiple displays and up to 128
simultaneous viewing spaces.
Enhance your visual and touch experience
with a 12.1” XGA (1024 x 768) high resolution
capacitive touch screen.
Identify anomalies easily with a 256-level
intensity-graded or color-graded persistence
display that provides a three-dimensional
view of your signals.
Support remote control over Ethernet, GPIB
and USB interfaces. Remote programming
allows oscilloscope and software automation.
LXI class C compliant, Web-interface and
MATLAB enabled.
Correct insertion loss and skew of your test
setup with PrecisionProbe. The oscilloscope
generates an edge of 12 ps rise time to enable
TDT calibration.
Trigger, analyze and debug your parallel
bus with world’s fastest digital channels.
Decode cutting-edge DDR4 and LPDDR4
protocol memory buses.
07 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
External 10-MHz reference clock input and
output for precise timebase synchronization
with more than one oscilloscope, RF
instruments or logic analyzers.
New industrial design and front panel layout
that enhances user experience and operation
of the oscilloscope.
Save Screen button provides quick access to
capture oscilloscope waveform and analysis
screenshots.
Customizable multipurpose key allows
you to customize its function to make your
favorite measurements, execute a script, save
waveforms or load a setup.
Access the marker and change the positions
quickly through the dedicated marker
controls.
Quick access to fine control by pressing the
horizontal and vertical knobs.
Five USB 3.0 host and device ports at the
front and back panel for data offload speed.
Additional USB 2.0 ports provide connectivity
to your USB keyboard, mouse and other
peripherals.
Threaded 3.5 mm RF connectors with
convenient torque mechanism ensures the most
reliable signal integrity and consistent 8 in. lbs.
connection. The AutoProbe II interface provides
a robust interface for the InfiniiMax III and III+
probing system.
Standard 500 GB removable solid state drive
improves processing speed and enhances
data security. 1 TB storage option is available.
08 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Best Signal Integrity
Groundbreaking oscilloscope technology for highest measurement accuracy
Whether you are deploying emerging high-speed bus technology, identifying spectral content of wideband RF signals or analyzing
transient physical phenomena, you need the truest representation of your signal under test. Keysight invests in leading-edge
technology to bring you the highest real-time oscilloscope measurement accuracy available today.
Keysight utilizes a proprietary Indium Phosphide (InP) integrated
circuit process to design the key technology blocks to deliver
high-bandwidth performance, ultra-low noise and high-voltage
signal input. This process is used in the pre-amplifier, trigger,
sampling, ADC and probe amplifier integrated circuit design. Not
only does this mean you are purchasing the best oscilloscope
on the market today, but you can also count on technology
leadership from Keysight in the future.
Indium Phosphide Integrated Circuits.
Infiniium V-Series’ front-end multi-chip module integrates the
pre-amplifier, trigger and sampling technology blocks using
a proprietary cutting-edge packaging technology. Based on
fine-line microcircuit processes and extensive experience with RF
design, Keysight developed a front-end that provides excellent
high-frequency electrical properties along with superior heat
dissipation. The unique technology includes a quasi-coaxial
path in the packaging to ensure signal shielding and delivers
a high-speed clock to the sampler chip for the most accurate
sampling time base.
Front-end multi-chip module.
All technology blocks, including the front-end, analog-todigital converter (ADC), memory controller, digital channels
and hardware serial trigger, are meticulously laid out on the
acquisition board with outstanding noise and coupling isolation.
Time scale accuracy of 0.1 parts per million after calibration is
achieved through precise clock synchronization and distribution,
as well as the use of a 10-MHz oven-controlled crystal oscillator
(OCXO) with ± 0.1 ppm of accuracy.
Acquisition board.
09 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Best Signal Integrity (Continued)
Superior measurements
Oscilloscope bandwidth allows signal rise times to be more accurately depicted. The oscilloscope noise floor directly impacts the
Y-axis voltage placement of each signal data point. The V-Series combines superiority in these characteristics with extremely low
sample clock jitter (< 100 fs). This ensures the lowest possible contribution to jitter measurements. In addition, the V-Series has the
industry’s deepest memory of up to 2 Gpts, allowing you to resolve low frequency jitter components in a single measurement.
Ultra-low noise at 33-GHz full bandwidth (2.10 mV at 50 mV/div).
Jitter measurement floor of less than 100 fs (80 fs with 30 GHz input sine
wave).
Keysight’s oscilloscopes are constantly improving in measurement
accuracy. The latest innovation is an improved calibration routine
that better aligns the sample points of the analog-to-digital
converter. The improved calibration results in higher spurious
free dynamic range (SFDR) and effective number of bits (ENOB).
The SFDR is improved as much as 15 dBc depending on the
carrier frequency. Higher SFDR is ideal for making RF and optical
measurements where spectral purity is of the utmost importance.
Improved SFDR and ENOB also means better jitter performance.
Ultimately this means the V-Series now features the highest SFDR
and ENOB of any oscilloscope on the market.
Improved calibration increases the spurious free dynamic range by up to
15 dBc.
10 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Fastest Mixed Signal Oscilloscope
World’s fastest 20 GSa/s digital channels,
delivering best analog and digital performance
Today’s designs require access to complex triggers and multiple
instruments. A mixed signal oscilloscope (MSO) integrates
traditional analog channels with 16 digital channels, providing up
to 20 channels you can use at once. Keysight MSOs seamlessly
integrate the familiar controls of an oscilloscope with the
additional digital data acquisition and pattern recognition of a
logic analyzer. You can trigger across any combination of analog
and digital channels, as well as decode the acquired data. The
MSO has the ability to label each individual channel as part of a
bus for decoding, saving hours of manual work. With the fastest
20 GSa/s sample rate, it provides superior insight into low-speed
serial and high-speed parallel bus interfaces.
DDR3 test setup with mixed signal oscilloscope.
MSO optimized for DDR/LPDDR2, 3, and 4
protocol triggering and decode
The MSO is specially targeted at DDR/LPDDR2, 3 and 4 memory
technologies, simplifying the complicated task of triggering,
analyzing and debugging the parallel buses. The additional
digital channels mean you can probe at the various command
signals to easily trigger on the different DDR commands
such as read, write, activate, precharge and more. DDR
triggering makes read and write separation easy, providing fast
electrical characterization, real-time eye analysis and timing
measurements. The DDR protocol decoder can decipher the DDR
packets and provide a time-aligned listing window to search for
specific packet information.
All of the above features come standard with the MSO. The
MSO is fully compatible with Keysight’s 90-pin logic analysis
connectors, making it easy to connect to your devices.
DDR3 protocol decode and write command trigger.
DDR3 write data burst eye-diagram analysis.
11 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Leading Hardware Serial Trigger
Challenges identifying and debugging high-speed
serial buses
In today’s high-speed serial application debug, it is not
always easy to find errors that happen rarely or occasionally.
Conventional oscilloscopes usually have limitations because of
the long dead time between acquisitions, which cause infrequent
errors or events to be missed. Furthermore, it is becoming more
difficult to identify and debug the root cause of design problems,
whether it is physical or protocol layer related.
Industry’s longest 160-bit sequence and sixteen8b/10b symbols hardware serial trigger
The Infiniium V-Series’ 12.5 Gb/s hardware serial trigger with
the industry’s longest 160-bit sequence provides an effective
event trigger to find and debug the most challenging problems
in your design. You can specify to trigger on bit 1 (high), 0 (low)
and X (don’t care) conditions when searching for a specific event.
The 160-bit sequence length is critical to trigger at the longest
symbol in an application such as USB 3.1 and PCI Express ® Gen
3 symbols that are 132-bit and 130-bit long. If the trigger bit
sequence is insufficient, you will not be able to reliably trigger on
an event you want to identify, making the debug process more
challenging.
The hardware serial trigger also provides 8b/10b triggering
of up to 16 symbols of “K” and “D” codes. Since the 8b/10b
symbols can be transmitted with either disparity to maintain the
DC-balanced on the line, the hardware serial trigger is designed
to trigger on both disparities so you do not miss an event. In
additional, the V-Series can decode the data packet at the
application level such as PCIe Gen 3, USB 3.0 and SATA packets,
providing deeper protocol insight into the application. When
there is an error, you can now go in and debug the issue whether
it is related to the physical layer, where the signal integrity
is corrupted, or protocol layer, where the data is incorrectly
transmitted.
V-Series’ hardware serial trigger finds a PCI Express Gen 3 compliance
ordered set symbol that is 130-bit long (PCIe Gen 3 uses 128b/130b
encoding).
The V-Series’ 8b/10b hardware triggers at 16 “K” and “D” symbols of the
SATA signal. The software protocol decoder further decodes the symbols
into higher-level data packets such as the SATA ALIGN packets.
12 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Leading Hardware Serial Trigger (Continued)
Industry’s only 12.5 Gb/s hardware serial trigger
with SSC tracking at oscilloscope channel
The Infiniium V-Series hardware serial trigger’s speed covers
most common high-speed serial bus rates starting from
480 Mb/s up to 12.5 Gb/s, which include USB 2.0, USB 3.1, PCI
Express Gen 3, HDMI 2.0 and SAS-3 applications. Most of these
applications also support spread spectrum clocking (SSC) where
the high-speed signal is modulated, and the V-Series’ hardware
serial trigger is able to track the SSC at the oscilloscope input
channel or with the use of an external reference clock input. The
hardware serial trigger will recover and generate a sub-rate clock
when locked to the signal.
External reference clock input is one of the methods to enable SSC
tracking by the hardware serial trigger.
Industry’s first PRBS error detector
The PRBS error detector can trigger and display the bit error of
the PRBS-7, 15, 23, and 31 signals. It identifies the error when
the pattern does not match the expected PRBS pattern that has
been set in the oscilloscope. When the next error happens, the
oscilloscope will replace the display with the next bit error. This
allows you to discover if the error is related to the bit pattern,
which is related to inter-symbol interference (ISI). The hardware
serial trigger provides an eye view plot to show the signal quality
of the signal received.
PRBS error detector triggers on a bit error in the PRBS-15 signal. An
eye view plot (bottom left) is provided to show the quality of the signal
received by the hardware serial trigger. The hardware serial trigger
works when there is enough eye opening (blue area) to discern the bit
value.
Use with InfiniiScan’s software serial trigger for up
to 240-bit sequence trigger
The hardware serial trigger can be combined with InfiniiScan’s
software event trigger to provide a two-stage trigger for up to
240-bit sequence. This is particularly powerful for the V-Series
with its deep acquisition memory (up to 2 Gpts), providing long
trace capture of 25 ms at the high resolution sampling rate of
80 GSa/s. The hardware first finds the 160-bit event condition
and then uses InfiniiScan for an additional 80-bit event trigger.
The InfiniiScan event trigger is not limited to bit sequence search.
Other search functions such as zone touch trigger allow you to
visually draw zones on the oscilloscope display as a second stage
trigger.
Hardware serial trigger and InfiniiScan’s software serial trigger provide
up to 240-bit sequence trigger.
13 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Advanced and Flexible 30-GHz Probing System
To take advantage of your investment in a high-bandwidth oscilloscope, you must have a probing system that can deliver high
performance measurements. InfiniiMax III and III+ probing systems provide up to 30 GHz of bandwidth, delivering unrivaled
performance and real-world usability. The InfiniiMode feature allows convenient measurement of differential, single-ended and
common mode signals with a single probe tip – without reconnecting the probe from its connection point.
The InfiniiMax III and III+ 30-GHz probing system includes accessories to enable probing with a ZIF tip, browsing or connecting to 2.92 mm/3.5 mm/
SMA inputs.
Industry’s only fully-integrated probe amplifier with unique S-parameter correction
Each individual InfiniiMax III and III+ probe amplifier stores its unique S-parameters and is automatically downloaded to the
oscilloscope when connected for probe response correction. The S-parameters of the various probe heads are also applied to further
flatten the probe’s magnitude and phase response for better measurement accuracy. Traditionally, probe correction uses a nominal
model based on a typical probe amplifier instead of the specific amplifier. Generally, the biggest variations between probing systems
are a result of the probe amplifier. The ability to correct a specific probe amplifier’s response results in a more accurate probe
correction, which yields a more accurate measurement.
Industry’s only upgradable probes
Purchase the probing performance you need today with
confidence that you can expand your performance in the future
with InfiniiMax III bandwidth-upgradable probes. Upgrade to
higher performance at a fraction of the cost.
The InfiniiMax III and III+ probing system uses the same InP technology
that enables high-bandwidth and low-noise oscilloscope measurements.
14 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Advanced Probing System
Industry’s lowest-noise active voltage termination
adapter
The N7010A active termination adapter provides a low noise
single-ended cabled measurement solution with 50 Ω voltage
termination (V TERM) up to 30 GHz bandwidth. The adapter is
optimized for low amplitude signal measurements with its high
signal-to-noise-ratio and low noise performance. The range of
the V TERM can be set to ± 4 V, which is ideal for applications such
as HDMI, DisplayPort, MHL and MIPI M-PHY®, which require
voltage termination. The adapter is compatible with 2.92 mm,
3.5 mm, and SMA connectors, as well as a SMP connector when
an adapter is used.
N7010A active termination adapter provides a low noise single-ended
cabled measurement solution with 50 Ω voltage termination (V TERM) up to
30 GHz bandwidth.
Industry’s first magnetically-engaged probe head
and tip
The N2848A/49A QuickTip offers the industry’s first
magnetically-engaged probe head and tip for a quick and secure
connection. The N2848A QuickTip probe head quickly snaps to
the N2849A probe tip, utilizing magnets to connect to the two
sides of the differential signal and ground. Multiple N2849A
probe tips can be installed on a board or device, allowing quick
and reliable measurement of many probe points. The QuickTip
supports InfiniiMode probing when used with the InfiniiMax
III+ probe amplifier and supports differential probing with the
InfiniiMax III probe amplifier.
The N2848A/49A is the industry’s first magnetically-engaged probe
head and tip for a quick and secure connection.
For more information about InfiniiMax III and III+ probes matching the performance of your Infiniium oscilloscope, see the InfiniiMax III
and III+ probes and accessories data sheet with the Keysight publication number 5990-5653EN.
15 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Advanced Probing System (Continued)
Turn your V-Series into a Time-Domain
Transmission (TDT) instrument to quickly
characterize and compensate any probes, cables
or measurement setup.
PrecisionProbe technology turns your oscilloscope into the
ultimate characterization tool. It provides quick characterization
of your entire measurement setup (including probes, cables and
switches) without the need for extra equipment. PrecisionProbe
takes advantage of the Infiniium V-Series’ 12 ps edge to
characterize and compensate for loss on the measurement
system.
PrecisionProbe compensation technology:
–– Creates custom probe transfer function (Vout/Vin)
–– Characterizes probed system transfer function
(Vout/Vin = Vout/Vsrc)
–– Removes unwanted cable insertion loss (S21)
The magnitude and phase response of a cable corrected using
PrecisionProbe.
Now every probe and cable in the system can have the exact
same frequency response without measurement variation caused
by probe or cable difference. You can properly characterize
custom probes as well.
When you combine InfiniiMax III and III+ probes with switches
between the amplifier and the probe head, PrecisionProbe allows
full correction for each probe’s path. For increased accuracy,
PrecisionProbe Advanced with faster edge (6 ps) is available.
Keysight uses Indium Phosphide process to produce a 12 ps edge step
response, ideal for characterizing cable and probe frequency response.
PCIe Gen 3 measurement improvement with PrecisionProbe
Root
Eye height with
Eye height with
Margin
complex standard calibration PrecisionProbe
improvements
5 GT/s
306.6 mV
348.33 mV
13.6%
8 GT/s
96.82 mV
106.01 mV
9.4%
16 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software
The most advanced waveform transformation software helps you render (embed/de-embed) waveforms
anywhere in your design.
The InfiniiSim waveform transformation toolset provides the most flexible and accurate means to render waveforms anywhere in
your design. The highly-configurable system modeling enables you to de-embed the effects of unwanted channel elements, embed
waveforms with channel models, view waveforms in physically improbable locations and compensate for loading of probes and other
circuit elements.
Hardware-accelerated rendering
The Infiniium V-Series renders the waveform in real time through
the oscilloscope hardware so it does not increase processing
time. Rendered waveforms are obtained quickly, which saves you
much time compared to processing done in software.
Circuit models to define your setup
The InfiniiSim waveform transformation toolset provides a
graphical user interface for you to define your measurement
system, including an arbitrarily complex system. Select from
the application preset for different topologies. Define the circuit
blocks with open, through, RLC circuit, or S-parameter files.
Model reflections
With the InfiniiSim waveform transformation toolset, you can
transform signals with confidence, whether you are inserting
or removing channel elements or relocating the measurement
point. InfiniiSim lets you model up to 27 different elements or
S-parameters at once, as well as the interaction between them.
InfiniiSim is the only toolset with the ability to model more than
one element including reflection model. The V-Series provides its
own input reflection (S11) in all modeling.
InfiniiSim allows embedding and de-embedding of up to 27 different
elements or S-parameter models at once to meet your most demanding
requirements.
Model your system with as much detail as you
need
InfiniiSim features the model setup that best matches your
design. Whether it is a simple single-element model or an
advanced general-purpose model with up to 27 elements in the
link, you can perfectly model your design and simulate the exact
probing point you want.
InfiniiSim renders the waveform through hardware acceleration.
17 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Open tightly shut eyes with equalization
Serial data equalization for the Infiniium V-Series provides fast
and accurate equalization using feed-forward equalization (FFE),
continuous time linear equalization (CTLE) and decision feedback
equalization (DFE) modeling in real time. The tool allows you to
use a combination of the equalization, which is found in actual
designs.
Serial data equalization software allows you to input your own
equalizer settings and tap values that are used in your design,
allowing you to simulate the eye opening in your receiver. If you
prefer, the software can find the optimal tap values for you as
well, which you can use as reference for your designs.
Serial data equalization opens the closed eye using CTLE and DFE
methods.
Powerful and flexible software trigger
The InfiniiScan software is a powerful tool for identifying signal
integrity issues that hardware triggering is unable to find in your
design. This innovative tool scans through thousands of acquired
waveforms per second to help you isolate signal anomalies,
saving you time and improving your designs. It includes an 80-bit
sequence trigger to find events of interest.
InfiniiScan’s zone touch trigger allows you to draw up to
eight “must intersect” or “must not intersect” zones on the
oscilloscope display to visually determine the event-identify
condition. If you can see the event of interest on the screen,
the zone touch trigger can be used to quickly and easily
isolate it, saving significantly more time than complicated
hardware triggers. Other triggers include non-monotonic edge,
measurement limit search, runt and pulse width.
Draw up to eight “must intersect” or “must not intersect” zones to trigger
on a specific event and condition.
18 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Gain insight into the causes of signal jitter to ensure your design has high reliability
With faster edge speeds and shrinking data-valid windows in today’s high-speed digital designs, insight into the causes of jitter has
become critical for success. Using EZJIT and EZJIT Plus jitter analysis software, the Infiniium V-Series helps you identify and quantify
jitter components that affect the reliability of your design. Time correlation of jitter to the real-time signal makes it easy to trace
jitter components to their sources. Additional compliance presets and a setup wizard simplify and automate RJ/DJ separation for
testing against industry standards. EZJIT Plus automatically detects embedded clock frequencies and repetitive data patterns on the
oscilloscope inputs and calculates the level of data-dependent jitter (DDJ) that contributes to the total jitter (TJ) by each transition in
the pattern, a feature unique to Infiniium oscilloscopes.
Real-time eye and clock recovery
Serial data analysis (SDA) software provides flexible clock
recovery including 1st- and 2nd-order PLL, explicit and constant
clock. With a stable clock, you can look at real-time eyes of
transition and non-transition bits. V-Series oscilloscopes with
SDA software also provide a unique view of bits preceding an
eye.
Measurement trends and jitter spectrum
The EZJIT tool helps you quickly analyze the causes of jitter.
Measurement trends allow you to see deeper views of factors
affecting measurements. Jitter spectrum is a fast method to find
the causes of jitter. The trend also allows you to characterize
spread spectrum clock (SSC) if it meets frequency and
modulation deviation requirements.
Two ways to separate jitter
Extract measurement trend from the signal for SSC characterization.
EZJIT Plus comes with two ways to separate jitter: the industrystandard spectral method and the emerging tail-fit method. Both
methods allow for simple separation of RJ and DJ, but the tail-fit
method provides jitter separation in the unique case of nonsymmetrical histograms and aperiodic bounded uncorrelated
jitter (ABUJ).
Unique RJ/DJ threshold view
EZJIT Plus also provides a unique spectral view of the jitter
spectrum with the threshold drawn on the chart. The spectral
view provides insight into the decision point of the separation and
allows for narrow or wide, tail-fit, or dual-dirac.
Tools to determine the correct settings
SDA, EZJIT, and EZJIT Plus come with an array of visual tools
to make analyzing the data simple and ensure that the correct
settings are chosen for difficult design decisions. For example,
the improved bathtub curve is a helpful visual tool to determine
which jitter separation method best fits the data.
Multiple jitter analysis plots for enhanced visualization.
19 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Discover signal anomalies in the amplitude noise domain of the waveform
Noise analysis with EZJIT Complete software for insight into the sources of noise in the signal.
More than your standard jitter
package
To efficiently determine root cause for any
type of signal degradation in the amplitude
domain, you must first determine whether
the problem is caused by random or
deterministic sources. To accomplish
this task, EZJIT Complete takes analysis
techniques used in the time domain
(jitter analysis) and extends them into the
amplitude domain.
More than just an eye contour
Key measurements
EZJIT Complete is an in-depth view
into impairments related to signal
levels – either logic ones or logic zeroes
– deviating from their ideal positions.
Existing eye-diagram tools simply provide
a view of an eye contour but do not
provide real measurement data other than
nice graphics and eye contour.
With EZJIT Complete, the V-Series
oscilloscopes offer the following
unique noise measurements:
–– Total interference (TI)
–– Deterministic interference (DI)
–– Random noise (RN)
–– Periodic interference (PI)
–– Inter-symbol interference (ISI)
–– Relative intensity noise (RIN - dBm
or dB/Hz)
–– Q-factor
EZJIT Complete uses separation
techniques to allow each bit to be
examined to determine correlated effects,
as well as make multiple measurements
on individual bits to determine
uncorrelated effects. Use FFTs to analyze
the frequency domain and extract random
components. Dual-Dirac modeling
techniques are also carried from the
jitter domain and used in the interference
domain.
20 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Use you PC to view and analyze data away from
your oscilloscope
Now you can do additional signal viewing and analysis away from
your oscilloscope and target system. Capture waveforms on your
oscilloscope, save them to a file, and recall the waveforms into
Keysight’s Infiniium Offline application on your PC.
View and analyze anywhere your PC goes
Take advantage of the large, high-resolution screens and
multiple displays found in your office. Use familiar oscilloscope
controls to quickly navigate and zoom in to any event of interest.
Use auto measurements and functions for additional insight.
Share scope measurements more easily across
your team
Infiniium Offline software supports a wide array of Infiniium applications.
You can share entire data records instead of being limited
exclusively to static screen shots. Collaborate with teams
members who work in different locations.
Create more useful documentation
Add up to 100 bookmark annotations and up to 20 simultaneous
measurements on the oscilloscope display. Use features such
as “right-click” and “cut-and-paste” to move screen images
between applications, without ever having to save the image to
a file.
Access all advanced analysis capabilities
Infiniium Offline includes a variety of upgrade options including
serial decode upgrades for a variety of serial buses, jitter analysis
and serial data analysis found in your oscilloscope.
Use Infiniium Offline to find signal anomalies such as power supply
coupling.
Peak search capability makes Infiniium Offline a frequency domain tool.
21 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Enhanced frequency and time domain measurements
Enhanced FFTs view
The Infiniium V-Series allows you to see frequency domain and
time domain at the same time. The standard spectral viewer
includes FFT controls such as start/stop, center frequency/span
and resolution bandwidth (RBW). Readout includes power and
frequency axis annotation and a peak table.
Peak readouts in the FFT plot.
Gated measurements and FFTs
The V-Series supports gated math and analysis including
FFTs. Use any of the standard 16 independent gates to narrow
measurements and FFT computations to a specific time window.
Drag the gate in the time domain, and see time correlated FFT
measurements for specified time periods. The example at the
right shows two simultaneous FFTs.
Perform measurements in the area of interest through the gated function.
Envelope measurements and AM demodulation
Envelope measurement tracks the outline and AM demodulation
of a burst signal. This is required for applications such as nearfield communication (NFC) and wireless charging applications.
Add measurements such as rise time to the envelope function for
characterization of the burst signal.
Envelope detection of signal burst.
22 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Compliance applications with deep standard
technical expertise
Today’s demanding environment means you have less time to
understand the details of the technologies you are testing.
You also have less time to develop test automation software to
increase measurement throughput and decrease time to market.
Keysight’s compliance applications and expertise save you time
and resources with measurement automation. Compliance
applications are certified to test to the exact specifications of
each technology standard. If a test passes on the V-Series in
your lab, you can be assured that it will pass in test labs and
plugfests worldwide. Keysight experts are on multiple technology
boards and industry standards committees, and they help to
define compliance requirements.
Setup wizards combined with intelligent test filtering give you
confidence that you are running the right tests. Comprehensive
HTML reports with visual documentation and pass/fail results
guarantee that critical information is retained. Check the
V-Series ordering configuration for supported standards.
DDR4 and LPDDR4 compliance application providing full electrical and
timing characterization based on JEDEC specification.
Test customization and switch automation
The N5467B user-defined application’s add-in provides you with
the ability to add additional tests, instrument control and device
control into the existing compliance applications. The compliance
applications can be controlled via the remote programming
interface (standard feature) for test automation.
Compliance applications on the V-Series support a switch
matrix, making testing simpler by automating test for each lane
of a multi-lane bus. Typical testing requires reconnecting the
oscilloscope each time you switch a lane, which increases test
time and possible inaccuracies. The V-Series solves this problem
by supporting a switch matrix through its compliance test.
Simply connect the switch to the oscilloscope and all the lanes,
and then press run to complete full testing of your entire device.
The compliance application fully supports PrecisionProbe and
InfiniiSim software, giving you the ability to characterize and
normalize every switch path to the device under test.
Test automation for multilane interface testing with no compromise
on accuracy, which reduces test time and effort. An Infiniium 90000
X-Series oscilloscope is shown above.
23 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Decodes more than 20 protocol standards
The Infiniium V-Series oscilloscopes come with more than 20
protocol decoders for decoding high-speed serial bus and
low-speed serial interface protocols. The list includes the
industry’s only 64b/66b decoder used by Ethernet 10GBASE-KR
standard and multilane MIPI decode. The V-Series protocol
decoders feature time-correlated markers that let you easily
move between the listing window and the waveform. It generates
CRC value from the payload and compares the value with the
embedded CRC to verify if any bit error has occurred. Once an
error is detected, you can further debug the problem, whether it
is caused by physical or protocol issues.
Multiple protocol decoders can be used at the same time with
analog and digital channels. They feature search and trigger
capability that lets you scan through the waveform to find the
trigger condition that interests you. Protocol decoders are
available in the Infiniium Offline tool as well. Check the V-Series
ordering configuration for supported protocols.
Packet decode and CRC verification through the oscilloscope MIPI
UniPro and UFS protocol decoders.
Combine V-Series and MATLAB for even more
analysis
Enhance the V-Series with a seamless gateway to powerful
MATLAB analysis functionality. User-defined function software
adds new analysis capabilities to the V-Series beyond traditional
math/analysis features. Now you have the freedom to develop
your own math functions or filters using MATLAB and its signal
processing toolbox. With a seamless integration to MATLAB, the
V-Series allows you to display your math and analysis functions
live on the oscilloscope screen, just like any other scopestandard functions.
Seamless integration of oscilloscope and MATLAB software enhances
the analysis capability.
24 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Achieve Clarify Faster - Frequency Domain Performance
Wideband and multi-channel FFT measurements
For frequency domain measurements that require you to see more than 500 MHz of signal spectral bandwidth and multiple FFTs
simultaneously, the V-Series offers wider bandwidth than spectrum analyzers and comes standard with 4 ports (channels) per
instrument.
Channels
The V-Series enables users to make wideband measurements up to 33 GHz and up to 16 simultaneous FFTs. You can analyze even
higher bandwidth signals by combining the V-Series with a down converter circuit.
Up
to 4
S-Series
PXA
1
2
510 MHz
0 MHz
BW
510 MHz
BW
UXA
1 GHz
2
1
V-Series
PXA +
Scope
1.2 GHz
1 GHz
BW
1
Z-Series
1
3
8 GHz
BW
13 GHz
BW
32 GHz
BW
... 63 GHz
BW
RF signal spectral bandwidth
1. S, V, and Z-Series 2 ch full bandwidth, 4 ch half bandwidth.
2. Up to 50 GHz carrier.
3. 3.6 GHz to 50 GHz carrier.
Use Infiniium capture and analysis of radar bursts as shown in this
orthogonal frequency-division multiplexing (OFDM) example.
Using data acquired from V-Series, VSA shows phase noise of
—125 dBC/Hz at 10 kHz and —131 dBc/Hz at 100 kHz.
25 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Achieve Clarify Faster - Frequency Domain Performance (Continued)
Trying to interpret traditional oscilloscope time-domain specifications can be challenging when trying to determine if a specific scope
can be recommended for RF, µW, and mmW measurements. With correction filters, low-noise front end and spurious free dynamic
range calibration, the V-Series oscilloscopes can be used for wideband frequency domain applications.
Sensitivity/noise density (1 mV/div; —38 dBm range)
Power spectral density measurement at 1.0001 GHz, 1.0001 GHz center frequency,
500 kHz span, and 3 kHz RBW
Noise figure (derived from measurement above)
Signal-to-noise ratio/dynamic range
(—1 dBm, 1 GHz input carrier, 0 dBm scope input range)
1 GHz center frequency, 100 MHz span, 1 kHz RBW, measurement at +20 MHz from
center
Absolute amplitude accuracy (0 to 30 GHz)
Deviation from linear phase (0 to 33 GHz)
Phase noise (at 1 GHz)
10 kHz offset
100 kHz offset
EVM
(802.121 2.4 GHz carrier, 20 MHz wide, 64 QAM)
Spurious responses (—4.6 dBm input signal, —4 dBm input range)
Spurious free dynamic range (SFDR)
1 GHz, —4.6 dBm signal present at input, FFT = 5 GHz span, 3 GHz center, 100 kHz RBW
2nd harmonic distortion
1 GHz input, —4.6 dBm, 5 GHz span, 3 GHz center, 100 KHz RBW
3rd harmonic distortion
1 GHz input, —4.6 dBm, 5 GHz span, 3 GHz center, 100 KHz RBW
Two-tone third-order Intercept (TOI) Point
0 dBm input tones, 2.436 and 2.438 GHz, 2 MHz separation, 2.437 GHz center frequency,
10 MHz span, 30 kHz RBW, 8 dBm range
Input match (S11)
(< 50 mV/div, 0 to 30 GHz, no attenuation)
(> = 50 mV/div, 0 to 30 GHz, no attentuation)
V-Series typical values (tested at 33 GHz bandwidth, 1
channel on one scope unless noted)
159 dBm/Hz
+15 dB
+111 dB
± 0.5 dB
± 3 deg
—125 dBc/Hz
—131 dBc/Hz
—47 dB (0.47%)
+67 dB
—51 dBc
—51 dBc
+26 dBm
—15 dB; 1.4 VSWR
—21 dB; 1.2 VSWR
Typical frequency domain characteristics for the Infiniium V-Series (not guaranteed, subject to change).
Using data acquired from the V-Series, VSA shows an excellent third
order intercept (TOI) value of 26 dBm.
Using data acquired from the V-Series, VSA shows an error vector
magnitude (EVM) for IEEE 802.11 QAM 64 of 0.47%.
26 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Most Advanced Platform
Standard features on V-Series platform for the most advanced oscilloscope
Fast, reliable and secure storage
The V-Series features 500 GB removable SSD for
–– Fast boot-up time
–– Increased reliability
–– Easy removal for secure environments
Powerful CPU and motherboard
V-Series includes an Intel Core i5 quad core processor with
16 GB of DDR3 RAM for fast computations, even with advanced
math and deep memory. The I/O ports on the oscilloscope
include
–– Ethernet 10/100/1000BASE-T
–– 4 USB 3.0 host ports (2 in front, 2 at the back)
–– 1 USB 3.0 device port (1 at the back)
–– 3 USB 2.0 host ports (1 in front, 2 at the back)
–– DisplayPort and VGA video out. Drivers support up to two
simultaneous displays
Standard 500 GB removable SSD for fast boot up, increased reliability
and enhanced security.
Fast data offload
For applications that require digitized waveforms to be offloaded,
the V-Series has fastest offload interfaces.
–– USB 3.0 for up to 200 MB/s data offload
–– Ethernet 1000BASE-T for up to 80 MB/s offload
Five USB 3.0 ports provide fast data offload.
Touch-screen innovation
V-Series oscilloscopes incorporate a capacitive touch screen. In
addition, Infiniium software includes a large number of touchfriendly enhancements including handles, enlarged touch fields
when touch is enabled, and gestures (multi-touch).
Capacitive touch and touch-friendly user interface enhances the
oscilloscope usability.
27 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Keysight Infiniium Oscilloscope Portfolio
Keysight’s Infiniium oscilloscope lineup includes bandwidths from 500 MHz to 63 GHz. Use the following selection guide to determine
which best matches your specific needs. All Infiniium real-time oscilloscopes feature the following:
–– Industry’s best signal integrity for each family series
–– Industry’s most advanced probing system
–– Industry’s most comprehensive software solutions
Infiniium Series
Available bandwidths
S-Series
500 MHz, 1 GHz, 2.5 GHz,
4 GHz, 6 GHz, 8 GHz
8 GHz
90000A Series
2.5 GHz, 4 GHz, 6 GHz, 8 GHz,
12 GHz, 13 GHz
13 GHz
V-Series
8 GHz, 13 GHz, 16 GHz, 20 GHz,
25 GHz, 33 GHz
33 GHz
Z-Series
20 GHz, 25 GHz, 33 GHz,
50 GHz, 63 GHz
63 GHz
20 GSa/s
800 Mpts
40 GSa/s
1 Gpts
80 GSa/s
2 Gpts
160 GSa/s
2 Gpts
100 Mpts
40 Mpts
100 Mpts
100 Mpts
50 Mpts
20 Mpts
50 Mpts
50 Mpts
50 Ω and 1 MΩ
Precision BNC (f)
50 Ω
Precision BNC (f)
50 Ω
3.5 mm (m)
Connector mate
BNC (m)
BNC (m)
SMA (f), 2.92 mm (f)
MSO models
Hardware serial
trigger option
Supported InfiniiMax
probe series
Yes
No
No
No
Yes 2
Yes 1, 2
50 Ω
3.5 mm (m) (33 GHz input)
1.85 mm (m) (> 33 GHz input)
SMA (f), 2.92 mm (f)
(33 GHz input)
2.4 mm (f), 1.85 mm (f)
(> 33 GHz input)
No
No
InfiniiMax I
InfiniiMax II
InfiniiMax III+
InfiniiMax I
InfiniiMax II
InfiniiMax III+
InfiniiMax III/III+ InfiniiMax I/II
with N5442A adapter
InfiniiMax III/III+ InfiniiMax I/
II with N5442A adapter
Maximum upgradable
bandwidth
Maximum sample rate
Maximum memory
(2-channel)
Standard memory
(2-channel)
Standard memory
(4-channel)
Channel inputs
Connector type
1. Trigger at a maximum 160-bit sequence or sixteen 8b/10b symbols. Works only on Channel 1.
2. Either MSO or hardware serial trigger option can be added to the oscilloscope.
28 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Ordering Configuration
Get the most out of your oscilloscope investment by choosing options and software for your most common tasks. Configure your
Infiniium V-Series oscilloscope in three easy steps.
1. Choose your oscilloscope, memory and options
Oscilloscope main-frame
Oscilloscope models 1
DSO models(4
DSA models(4
analog channels)
analog channels) 2
DSOV334A
DSAV334A
DSOV254A
DSAV254A
DSOV204A
DSAV204A
DSOV164A
DSAV164A
DSOV134A
DSAV134A
DSOV084A
DSAV084A
MS O models(4 analog channels + 16
digital channels)
MSOV334A
MSOV254A
MSOV204A
MSOV164A
MSOV134A
MSOV084A
Analog bandwidth
2 channel
4 channel
Sample rate
2 channel
4 channel
33 GHz
25 GHz
20 GHz
16 GHz
13 GHz
8 GHz
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
16 GHz
16 GHz
16 GHz
16 GHz
13 GHz
8 GHz
All models come with front cover, power cord, keyboard, mouse, calibration cable, ESD wrist strap and (5) coax adapters 3.
The 8 and 13 GHz models come standard with two N5442A precision BNC adapters.
Oscilloscope memory depth 4
Acquisition memory depth upgrade
50 Mpts/channel memory
100 Mpts/channel memory 5
200 Mpts/channel memory
500 Mpts/channel memory
1 Gpts/channel memory
2 Gpts/channel memory
Option number on new oscilloscope
Standard
DSOV000-100
DSOV000-200
DSOV000-500
DSOV000-01G
DSOV000-02G
Options
Description
Hardware serial trigger 6
MSO with additional 16 digital channels 6
1 TB removable solid state drive (SSD) with Windows 7
GPIB card-interface
Performance verification and deskew fixture
Stack mount kit option for stacking two frames
Rack mount kit
ANSI Z540 compliant calibration
Calibration + uncertainties + guardbanding (accredited)
DSA option for MSO models 7
Testmobile scope cart
Option number on new oscilloscope
DSOV000-810
Standard on MSO models
DSOV000-801
DSOV000-805
DSOV000-808
N2117A
N5470A
DSOV000-A6J
DSOV000-AMG
MSOV000-DSA
1180CZ
1. All models ship standard with 3-year warranty.
2. DSA models come standard with 100 Mpts/channel, EZJIT Complete, and Serial Data Analysis.
3. Oscilloscope 8, 13, and 16 GHz models come with 3.5 mm female-to-female adapters rated to 25 GHz (part number 1250-3758). All other models come
with 3.5 mm female-to-female adapters rated to 35 GHz (part number 5061-5311).
4. Memory depth per channel when 4 channels are turned on.
5. DSA models come with 100 Mpts/channel standard.
6. Either MSO or hardware serial trigger option can be added to the oscilloscope. Upgrade is not available when the oscilloscope already has the MSO or
hardware serial trigger installed.
7. Available for MSO models only. DSA option comes standard with 100 Mpts/channel, EZJIT Complete, and Serial Data Analysis.
29 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Ordering Configuration (Continued)
2. Choose your probes and accessories
Probe amplifier
Description
30 GHz InfiniiMax III probe amplifier
25 GHz InfiniiMax III probe amplifier
20 GHz InfiniiMax III probe amplifier
16 GHz InfiniiMax III probe amplifier
20 GHz InfiniiMax III+ probe amplifier 1
16 GHz InfiniiMax III+ probe amplifier 1
13 GHz InfiniiMax III+ probe amplifier 1
8 GHz InfiniiMax III+ probe amplifier 1
Model number
N2803A
N2802A
N2801A
N2800A
N7003A
N7002A
N7001A
N7001A
Probe head
Description
16 GHz QuickTip probe head 2
QuickTip probe tip (set of 4) 2
16 GHz solder-in probe head
26 GHz solder-in probe head 2
28 GHz zero insertion force (ZIF) probe head
200 Ω ZIF tip for high sensitivity 3
25 GHz PC board ZIF tip (for normal sensitivity)
30 GHz browser probe head
Browser tip replacement (set of 4)
28 GHz 3.5 mm/2.92 mm/SMA probe head 2
Model number
N2848A
N2849A
N5441A
N2836A
N5439A
N5447A
N2838A
N5445A
N5476A
N5444A
Probe adapter
Description
30 GHz voltage termination adapter (50 Ω to 3.5 mm female-to-male
connector)
Performance verification and deskew fixture
Precision BNC adapter (50 Ω to 3.5 mm (female) to precision BNC (female)
connector)
Sampling scope adapter (50 Ω to 3.5 mm female-to-male connector)
High impedance probe adapter (includes one N2873A passive probe)
Model number
N7010A
N5443A
N5442A
N5477A
N5449A
For more information about Keysight’s InfiniiMax probes and accessories selection guide, view the Keysight publication number
5968-7141EN.
For more information about Keysight’s InfiniiMax III and III+ probing system, view the data sheet with the Keysight publication number
5990-5653EN.
1. With InfiniiMode technology, allowing you to switch to differential, single-ended, and common mode without adjusting probe tip connections.
2. Probe head that supports InfiniiMode connections.
3. Compatible only with InfiniiMax III probe amplifier.
30 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Ordering Configuration (Continued)
MSO probes and accessories
Description
Single-ended flying lead set
Single-ended soft touch connectorless probe
1/2 size soft touch connectorless probe
Differential soft touch probe
Differential flying leads
Model number
E5382B
E5390A
E5398A
E5387A
E5381A
The MSO is compatible with all Keysight 90-pin cable connectors. The N2815A MSO/LA cable comes standard with MSO models or
MSO upgrade.
3. Choose your measurement-specific software
Measurement and analysis software
Description
EZJIT Complete jitter analysis
EZJIT Plus jitter analysis
EZJIT jitter analysis
Frequency domain analysis
High-speed SDA and clock recovery
InfiniiScan software triggering
InfiniiSim advanced signal de-embedding
InfiniiSim basic signal de-embedding
MATLAB - Basic digital analysis
MATLAB - Standard digital analysis
MultiScope software - combines two scopes 1
MultiScope software - combines up to five scopes 1
MultiScope software - combines up to ten scopes 1
Pulse amplitude modulation (PAM-4) analysis
PrecisionProbe calibration
Serial data equalization
Spectrum visualizer
User-defined function
License type
Fixed
Factory-installed on
new scope purchase or
user-installed on existing
scope
N8823A-1FP
N5400A-1FP
E2681A-1FP
N8832A-001
E2688A-1FP
N5414B-1FP
N5465A-1FP
N5465A-3FP
N8831A-001
N8831A-002
—
—
—
N8827A-1FP
N2809A-1FP
N5461A-1FP
64996A-1FP
N5430A-1FP
1. Supports any combination of Infiniium oscilloscope models with software 5.50 and above.
Floating
User-installed
transportable license
Server-based license
N8823A-1TP
N5400A-1TP
E2681A-1TP
—
E2688A-1TP
N5414B-1TP
N5465A-1TP
N5465A-3TP
—
—
N8834A-ATP
N8834A-BTP
N8834A-CTP
N8827A-1TP
N2809A-1TP
N5461A-1TP
64996A-1TP
N5430A-1TP
N5435A-067
N5435A-001
N5435A-002
—
N5435A-003
N5435A-004
N5435A-027
N5435A-026
—
—
N5435A-085
N5435A-086
N5435A-090
N5435A-077
N5435A-044
N5435A-025
—
N5435A-005
31 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Ordering Configuration (Continued)
3. Choose your measurement-specific software (Continued)
Compliance test and validation software
Description
BroadR-Reach
DDR1 and LPDDR1
DDR2 and LPDDR2
DDR3 and LPDDR3
DDR4 and LPDDR4
DisplayPort 1.2
eDP 1.4
eMMC
Ethernet + EEE 10/100/1000BASE-T
Ethernet 10GBASE-T
Ethernet 10GBASE-KR
Ethernet 100GBASE-CR10
Ethernet 100GBASE-CR4
Ethernet 100GBASE-KR4
GDDR5
HDMI 2.0
MHL 3.0
MIPI D-PHYSM
MIPI M-PHY
MOST
PCI Express Gen4
SAS-3
SATA Gen 3
SFP+
USB 2.0
USB 3.1
USB HSIC
UHS-I
UHS-II
User-defined application
Thunderbolt
XAUI
License type
Fixed
Factory-installed on new
scope purchase or userinstalled on existing scope
N6467A-1FP
U7233A-1FP
N5413B-1FP
U7231B-1FP
N6462A-1FP
U7232C-1FP
N6469A-1FP
N6465A-1FP
N5392B-1FP
U7236A-1FP
N8814B-1FP
N8828A-1FP
N8830A-1FP
N8829A-1FP
U7245A-1FP
N5399C-1FP
N6460B-1FP
U7238C-1FP
U7249C-1FP
N6466A-1FP
N5393F-1FP
N5412D-1FP
N5411B-1FP
N6468A-1FP
N5416A-1FP
U7243B-1FP
U7248A-1FP
U7246A-1FP
N6461A-1FP
N5467B-1FP
N6463B-1FP
N5431A-1FP
Floating
User-installed transportable
license
Server-based license
N6467A-1TP
U7233A-1TP
N5413B-1TP
U7231B-1TP
N6462A-1TP
U7232C-1TP
N6469A-1TP
N6465A-1TP
N5392B-1TP
U7236A-1TP
N8814B-1TP
N8828A-1FP
N8830A-1FP
N8829A-1FP
U7245A-1TP
N5399C-1TP
N6460B-1TP
U7238C-1TP
U7249C-1TP
N6466A-1TP
N5393F-1TP
N5412D-1TP
N5411B-1TP
N6468A-1TP
N5416A-1TP
U7243B-1TP
U7248A-1TP
U7246A-1TP
N6461A-1TP
N5467B-1TP
N6463B-1TP
N5431A-1TP
N5435A-062
N5435A-021
N5435A-037
N5435A-053
N5435A-056
N5435A-041
N5435A-083
N5435A-061
N5435A-060
N5435A-023
N5435A-059
N5435A-078
N5435A-080
N5435A-079
—
N5435A-070
N5435A-078
N5435A-022
N5435A-043
N5435A-068
N5435A-112
N5435A-073
N5435A-028
N5435A-074
N5435A-017
N5435A-075
N5435A-042
—
N5435A-052
N5435A-058
N5435A-057
N5435A-018
32 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Ordering Configuration (Continued)
3. Choose your measurement-specific software (Continued)
Protocol decode software
Description
8b/10b (generic)
64b/66b Ethernet (10GBASE-KR)
CAN/LIN/FlexRay/CAN-FD
DDR2/3/4 and LPDDR2/3/4
Ethernet 10BASE-T/100BASE-TX
I²C/SPI
I2S protocol triggering and decode
JTAG
MIPI CSI-3
MIPI DigRF® v4
MIPI D-PHY
MIPI LLI
MIPI RFFE
MIPI UFS
MIPI UniPro
SPMI protocol trigger and decode
Generic Raw – NRZ protocol decode
Generic Raw – PAM-4 protocol decode
PCIe 1 and 2
PCIe 3
RS-232/UART
SATA
SSIC
SVID
USB 2.0
USB 3.0
License type
Fixed
Factory-installed on new
scope purchase or userinstalled on existing scope
-1
N8815A-1FP
N8803C-1FP
-2
N8825A-1FP
N5391A-1FP
N8811A-1TP
N8817A-1FP
N8820A-1FP
N8807A-1FP
N8802A-1FP
N8809A-1FP
N8824A-1FP
N8818A-1FP
N8808A-1FP
N8845A-1FP
-1
-3
N5463A-1FP
N8816A-1FP
N5462A-1FP
N8801A-1FP
N8819A-1FP
N8812A-1FP
N5464A-1FP
N8805A-1FP
1. Standard on DSA models or with high-speed SDA option.
2. Standard on MSO models or with MSO upgrade.
3. Requires PAM-4 app and SDA option (firmware 6.0 and up).
Floating
User-installed transportable
license
Server-based license
-1
N8815A-1TP
N8803C-1TP
-2
N8825A-1TP
N5391A-1TP
N8811A-1TP
N8817A-1TP
N8820A-1TP
N8807A-1TP
N8802A-1TP
N8809A-1TP
N8824A-1TP
N8818A-1TP
N8808A-1TP
N8845A-2FP
-1
-3
N5463A-1TP
N8816A-1TP
N5462A-1TP
N8801A-1TP
N8819A-1TP
N8812A-1TP
N5464A-1TP
N8805A-1TP
-1
N5435A-045
N5435C-103
-2
N5435A-088
N5435A-006
105
N5435A-038
N5435A-065
N5435A-047
N5435A-036
N5435A-049
N5435A-072
N5435A-063
N5435A-048
N5435A-114
-1
-3
N5435A-032
N5435A-046
N5435A-031
N5435A-035
N5435A-064
N5435A-054
N5435A-034
N5435A-071
33 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Ordering Configuration
Upgrade your existing oscilloscope
Bandwidth upgrades
Description
Bandwidth upgrade to 13 GHz
Bandwidth upgrade to 16 GHz 1
Bandwidth upgrade to 20 GHz 1
Bandwidth upgrade to 25 GHz 1
Bandwidth upgrade to 33 GHz 1
Option number for existing oscilloscopes
(post-sale)
DSOV13GBW
DSOV16GBWU
DSOV20GBWU
DSOV25GBWU
DSOV33GBWU
Memory upgrades
Description
50 to 100 Mpts/channel memory upgrade
100 to 200 Mpts/channel memory upgrade
200 to 500 Mpts/channel memory upgrade
500 Mpts/channel to 1 Gpts/channel memory upgrade
1 Gpts/channel to 2 Gpts/channel memory upgrade
Option number for existing oscilloscopes
(post-sale)
N2810A-100
N2810A-200
N2810A-500
N2810A-01G
N2810A-02G
Other upgrades
Description
Hardware serial trigger upgrade 1, 2
MSO upgrade 1, 2
Additional 500 GB removable solid state drive (SSD) with Windows 7
Additional 1 TB removable solid state drive (SSD) with Windows 7
GPIB card-interface
Performance verification and deskew fixture
Stack mount kit option for stacking two frames
Rack mount
Testmobile scope cart
Option number for existing oscilloscopes
(post-sale)
N2119AU
N2118AU
N2110A-500
N2110A-01T
82351B
N5443A
N2117A
N5470A
1180CZ
1. Return to Keysight service center is required to perform upgrade.
2. Either MSO or hardware serial trigger option can be added to the oscilloscope. Upgrade is not available when the oscilloscope already has the MSO or
hardware serial trigger installed.
34 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics
Vertical
DSO/DSA/MSO models
Vertical - oscilloscope channels
Input channels
Analog bandwidth (—3 dB)
2 channel 1
2 channel (typical)
4 channel 1
4 channel (typical)
Rise time/fall time
10 to 90% 5
20 to 80% 6
Input impedance 2
Input sensitivity 3
Full scale hardware sensitivity
Input coupling
Vertical resolution 3, 4
Channel-to-channel isolation
(any two channels with equal V/div
settings)
DC gain accuracy 1, 2, 3, 4
Maximum input voltage
Offset range
Offset accuracy 1
Dynamic range
DC voltage measurement accuracy
V084A
V134A
V164A
V204A
V254A
V334A
16 GHz
16.8 GHz
16 GHz
16.8 GHz
20 GHz
21 GHz
16 GHz
16.8 GHz
25 GHz
26.2 GHz
16 GHz
16.8 GHz
32 GHz
33 GHz
16 GHz
16.8 GHz
17.6 ps
12.4 ps
13.3 ps
9.4 ps
DSO/DSA models - 4 analog
MSO models - 4 analog + 16 digital
8 GHz
8.4 GHz
8 GHz
8.4 GHz
13 GHz
13.6 GHz
13 GHz
13.6 GHz
55.0 ps
33.8 ps
27.5 ps
22.0 ps
38.9 ps
23.9 ps
19.4 ps
15.6 ps
50 Ω, ± 3%
1 mV/div to 1 V/div
60 mV to 8 V (oscilloscope only)
60 mV to 1.2 V (oscilloscope with N7010A voltage termination adapter)
DC
8 bits, ≥ 12 bits with high-resolution mode or averaging
Channel-to-channel: 1-3, 1-4, 2-3, and 2-4
DC to BW: 70 dB
Channel-to-channel: 1-2 and 3-4
DC to 4 GHz: 50 dB
4 to 12 GHz: 40 dB
12 GHz to BW: 35 dB
± 2% of full scale at full resolution channel scale (± 2.5% for ≤ 5 mV/div)
±5V
Vertical sensitivity
Available offset
1 to 49 mV/div
± 0.4 V
50 to 79 mV/div
± 0.7 V
80 to 134 mV/div
± 1.2 V
135 to 239 mV/div
± 2.2 V
240 mV/div to 1 V/div
± 4.0 V
≤ 3.5 V: ± (2% of channel offset + 1% of full scale + 1 mV)
> 3.5 V: ± (2% of channel offset + 1% of full scale)
± 4 div from center screen
Dual cursor: ± [(DC gain accuracy) + (resolution)]
Single cursor: ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)]
Available offset (oscilloscope with
N7010A voltage termination adapter)
Additional ± 4 V
Additional ± 4 V
Additional ± 4 V
Additional ± 4 V
Additional ± 4 V
1. Denotes warranted specifications, all others are typical. Specifications are valid after 30-minute warm up period and ± 5% from oscilloscope firmware
calibration temperature.
2. Input impedance is valid when V/div scaling is adjusted to show all waveform vertical values within scope display.
3. Full scale is defined as eight vertical divisions. Magnification is used below 7.5 mV/div. Below 7.5 mV/div, full scale is defined as 60 mV/div. The major scale
settings are 1 mV/div, 2 mV/div, 5 mV/div, 10 mV/div, 20 mV/div, 50 mV/div, 100 mV/div, 200 mV/div, 500 mV/div and 1V/div.
4. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
5. Calculation based on Tr = 0.44/BW.
6. Calculation based on Tr = 0.31/BW.
35 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
RMS noise floor (oscilloscope only) V084A
V134A
V164A
V204A
V254A
V334A
Vertical setting (mVrms)
8 GHz
13 GHz
16 GHz
20 GHz
25 GHz
33 GHz
5 mV/div
0.21 mV
0.27 mV
0.31 mV
0.37 mV
0.45 mV
0.58 mV
10 mV/div
0.23 mV
0.28 mV
0.36 mV
0.42 mV
0.49 mV
0.60 mV
20 mV/div
0.46 mV
0.57 mV
0.65 mV
0.74 mV
0.83 mV
1.04 mV
50 mV/div
1.04 mV
1.09 mV
1.32 mV
1.54 mV
1.73 mV
2.09 mV
100 mV/div
1.92 mV
2.30 mV
2.63 mV
3.02 mV
3.39 mV
3.98 mV
200 mV/div
4.39 mV
5.52 mV
6.14 mV
6.92 mV
8.16 mV
9.88 mV
500 mV/div
10.07 mV
12.42 mV
13.68 mV
15.05 mV
17.08 mV
20.25 mV
1 V/div
18.47 mV
21.36 mV
26.12 mV
30.15 mV
34.36 mV
39.35 mV
RMS noise floor (with N7010A voltage termination adapter)
Vertical setting (mVrms)
8 GHz
13 GHz
16 GHz
20 GHz
25 GHz
30 GHz
5 mV/div
0.28 mV
0.41 mV
0.44 mV
0.51 mV
0.65 mV
0.84 mV
10 mV/div
0.30 mV
0.42 mV
0.48 mV
0.57 mV
0.70 mV
0.86 mV
20 mV/div
0.54 mV
0.74 mV
0.84 mV
0.99 mV
1.20 mV
1.48 mV
50 mV/div
1.21 mV
1.64 mV
1.86 mV
2.18 mV
2.64 mV
3.21 mV
100 mV/div
2.42 mV
3.25 mV
3.68 mV
4.30 mV
5.16 mV
6.21 mV
200 mV/div
4.84 mV
6.48 mV
7.33 mV
8.53 mV
10.18 mV
12.18 mV
500 mV/div
12.16 mV
16.39 mV
18.64 mV
21.89 mV
26.42 mV
32.06 mV
1 V/div
24.21 mV
32.50 mV
36.80 mV
42.99 mV
51.55 mV
61.98 mV
Effective number of Bits (ENOB) (Signal 80% of full scale)
Vertical setting
8 GHz
13 GHz
16 GHz
20 GHz
25 GHz
33 GHz
7 mV/div
5.9
5.7
5.5
5.4
5.1
5.0
10 mV/div
6.1
5.9
5.8
5.7
5.5
5.2
20 mV/div
6.3
6.1
6.0
5.8
5.6
5.4
50 mV/div
6.4
6.2
6.2
6.0
5.8
5.6
100 mV/div
6.6
6.4
6.2
6.0
5.8
5.6
Vertical - digital channels
On all MSO models
Input channels
16 digital channels
Threshold groupings
Two individual threshold settings (1 for channels 0 to 7 and 1 for channels 8 to 15)
Threshold selections
TTL (1.4 V), CMOS (2.5 V), ECL (—1.3 V), PECL (3.7 V), custom (± 3.75 V in 10 mV increments)
Maximum input voltage
± 40 V peak CAT I
Threshold accuracy
± (100 mV + 3% of threshold setting)
Input dynamic range
± 10 V about threshold
Minimum input voltage swing
200 mV peak-to-peak
Input impedance (flying leads)
20 kΩ ± 2% (~0.7 pF) at probe tip
Resolution
1 bit
Analog bandwidth
3 GHz (depends on probing)
36 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Horizontal
Horizontal system: Oscilloscope channels
Main timebase range
Main timebase delay range
Resolution
Reference position
Zoom time base range
Time scale accuracy 1, 8
Oscilloscope channel de-skew range
Intrinsic jitter 6
(Sample clock jitter)
Inter-channel intrinsic jitter 3
Inter-channel skew drift 3, 7
Jitter measurement floor 2
–– Time interval error
–– Period jitter
–– Cycle-cycle/N-cycle jitter
Inter-channel jitter measurement floor 2, 3, 5
2 ps/div to 200 s/div
0 s ± 200 s real time
1 ps
Continuously adjustable across horizontal display range
1 ps/div to current main time scale setting
± (0.1 ppm initial + 0.1 ppm/year aging)
± 1 ms range, 10 fs resolution
Acquired time range or
Internal reference
delta-time interval
< 1 µs (100 ns/div)
100 fs rms
10 µs (1 µs/div)
200 fs rms
100 µs (10 µs/div)
500 fs rms
1 ms (100 µs/div)
2 ps rms
100 fs rms
< 50 fs rms
External reference
100 fs rms
200 fs rms
200 fs rms
500 fs rms
2
2
 Noise Floor 

 + ( Intrinsic Jitter )
 Slew Rate 
2
2
 Noise Floor 
2 
 + ( Intrinsic Jitter )
Slew
Rate


2
2
 Noise Floor 
3 
 + ( Intrinsic Jitter )
 Slew Rate 
2
2
 Time Interval   Time Interval   Inter channel 
 Error Edge1  +  Error Edge 2  + 
(
) 
(
)   Intrinsic Jitter

2
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) ⦁ 2 ⦁ π ⦁ f, slew rate of fast step ~= (10 to 90% rise time).
3. Intra-channel = both edges on the same channel, Inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge.
4. Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time
Measurement Accuracy formula.
5. Scope channels and signal interconnect de-skewed prior to measurement.
6. E xternal timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
7. Skew between channels caused by ± 5 °C temperature change.
8. Initial = immediately after factory or user calibration.
37 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Horizontal (Continued)
Horizontal system: Oscilloscope channels (Continued)
Delta time measurement accuracy 2, 3, 4, 5
–– Intra-channel
–– No averaging
  Time Interval 2
± 5  
 +
  Error (Edge1) 

–– 256 averages
–– Inter-channel
–– No averaging
–– 256 averages
2
 Time Interval   Time Scale   Delta   

 Error Edge 2  +  
(
)    Accuracy   Time  


2
2


5  Time Interval   Time Interval    Time Scale   Delta   
±  
+
+


 
 
16  Error (Edge1)   Error (Edge 2)    Accuracy   Time   


2 
  Time Interval 2  Time Interval  2
 Inter channel  
5  
+
+
 

  Error (Edge1)   Error (Edge 2)   Intrinsic Jitter 
±


  Time Scale   Delta    Inter channel


+  
  Time   +  Skew Drift



Accuracy
 
 




2
2
2

Time Interval   Time Interval   Inter channel  
 5  

+
+
 

16  Error (Edge1)   Error (Edge 2)   Intrinsic Jitter 
±


  Time Scale   Delta    Inter channel


+

+





  Accuracy   Time    Skew Drift 


2. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) ⦁ 2 ⦁ π ⦁ f, slew rate of fast step ~= (10 to 90% rise time).
3. Intra-channel = both edges on the same channel, Inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge.
4. Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time
Measurement Accuracy formula.
5. Scope channels and signal interconnect de-skewed prior to measurement.
38 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Acquisition
Acquisition - oscilloscope channels
V084A
V134A
V164A
V204A
V254A
V334A
Maximum real-time sample rate
2 channels
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
4 channels
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
40 GSa/s
Memory depth per channel
4 channels
2 channels
Standard
50 Mpts
100 Mpts
Option 100 (standard on DSA model) 100 Mpts
200 Mpts
Option 200
200 Mpts
500 Mpts
Option 500
500 Mpts
1 Gpts
Option 01G
1 Gpts
1 Gpts
Option 02G
2 Gpts
2 Gpts
Maximum acquired time at highest
40 GSa/s
80 GSa/s
real-time resolution
Standard
1.25 ms
1.25 ms
Option 100 (standard on DSA model) 2.5 ms
2.5 ms
Option 200
5 ms
5 ms
Option 500
12.5 ms
12.5 ms
Option 01G
25 ms
12.5 ms
Option 02G
50 ms
25 ms
Maximum waveform update rate
> 400,000 waveforms per second (when in segmented memory mode)
Sampling modes - oscilloscope channels
Real-time
Successive single shot acquisitions
Real-time with averaging
Averages are selectable from 2 to 65,534
Real-time with peak detect
80 GSa/s in 2-channel mode, 40 GSa/s in 4-channel mode
Real-time with hi-resolution
Real-time boxcar averaging reduces random noise and increases resolution
Equivalent time
Resolution 338 fs
Gaussian magnitude, linear phase
Slow filter roll off while maintaining linear phase
Roll mode
Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample rates up
to 10 MSa/s with a maximum record length of 40 Mpts.
Segmented memory
Captures bursting signals at maximum sample rate without consuming memory during periods of inactivity.
–– Maximum time between triggers is 562,950 seconds
–– Re-arm time: 2.5 μs
Filters - Sin(x)/x interpolation
Acquisition - digital channels
Maximum real-time sample rate
Maximum memory depth per channel
Minimum width glitch detection
Memory depth:
20 M
50 M
100 M
200 M
500 M
1G
2G
Max # of segments:
4096
8192
16384
32768
65536
131072
131072
On/off selectable FIR digital filter. Digital signal process adds points between acquired data points to enhance
measurement accuracy and waveform display.
10 GSa/s with 16 channels, 20 GSa/s with 8 channels
Up to 1 Gpts
50 ps
39 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Trigger
Trigger - oscilloscope channels
Trigger sources
Sensitivity
Edge trigger bandwidth
Minimum pulse width trigger
Hardware
Software (InfiniiScan)
Level range
Internal
Auxiliary
Sweep modes
Display jitter 2, 3, 4 (Trigger jitter)
Trigger holdoff range
Trigger qualification (and qualifier)
Trigger actions
Trigger sequences
Trigger - digital channels MSO models
Threshold range (user-defined)
Threshold accuracy
Protocol triggering
Channel 1, channel 2, channel 3, channel 4, and aux
Internal low: 2.0 div p-p for 0 to 22 GHz
Internal high: 0.3 div p-p for 0 to 18 GHz, 1.0 div p-p for > 18 to 22 GHz
Auxiliary: 2.5 GHz
> 20 GHz
250 ps
40 ps
± 4 div from center screen or ± 4 V, whichever is smaller
± 5 V, also limit input signal to ± 5 V
Auto (continuous), triggered, single, segmented
230 fs rms
100 ns to 10 s
Single and multiple channels may be logically qualified with any other trigger mode
Specify an action to occur (and the frequency of the action) when a trigger conditions occurs.
Actions include email on trigger and execute "multipurpose" user setting.
Three stage trigger sequences including two-stage hardware (find event (A) and trigger event (B))
and one-stage InfiniiScan software trigger. Supports all hardware trigger modes except “edge
then edge” and “video” and "Gbit serial." Supports “delay (by time)” and “reset (by time or event)”
between two hardware sequences. The minimum latency between “find event (A)” and “trigger event
(B)” is 3 ns.
± 3.75 V in 10 mV increments
± (100 mV + 3% of threshold setting)
All MSO models come standard with protocol trigger for DDR, LPDDR, DDR2, LPDDR2, DDR3,
LPDDR3, DDR4, and LPDDR4
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Internal edge trigger mode with JitterFree correction. Value depends on scope settings and trigger signal characteristics, and is equal to TIE value
expressed in the formula above using the minimum Time Scale Accuracy value.
3. Value shown represents typical Display jitter for DSOV164A at 100 mV/div triggering on 500 mVpp 8 GHz sin wave signal.
4. Sample rate at maximum. Noise and slew rate determined at fixed-voltage trigger threshold, near middle of signal. Displayed signal not vertically clipped.
40 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Trigger (Continued)
Trigger mode - hardware
Edge (analog and digital)
Triggers on a specified slope (rising, falling or alternating between rising and falling) and voltage level on any
channel or auxiliary trigger
Edge transition (analog)
Triggers on rising and falling edges that cross two voltage levels in > or < the amount of time specified. Edge
transition setting from 250 ps
Edge then edge (time) (analog and The trigger is qualified by an edge. After a specified time delay between 10 ns to 10 s, a rising or falling edge on any
digital)
one selected input will generate the trigger
Edge then edge (event) (analog and The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or falling edges, another
digital)
rising or falling edge on any one selected input will generate the trigger
Glitch (analog and digital)
Trigger on glitches narrower than the other pulses in your waveform by specifying a width less than your narrowest
pulse and a polarity. Trigger on glitches as narrow as 125 ps (analog only). Glitch range settings from 250 ps to 10 s
Pulse width (analog and digital)
Triggers on a pulse width that is wider or narrower than the other pulses in your waveform by specifying a pulse
width and a polarity. Trigger on pulse widths as narrow as 125 ps (analog only). Pulse width range settings from 250
ps to 10 s. Trigger point can be "end of pulse" to "time out"
Runt (analog)
Triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Can be time qualified with minimum setting of 250 ps
Timeout (analog and digital)
Triggers when a channel stays high, low or unchanged for too long. Timeout settings from 250 ps to 10 s
Pattern (analog and digital)
Triggers when a specified logical combination of the channels is entered, exited or present for a specified period of
time or is within a specified time range or times out. Each channel can have a value of high (H), low (L), or don't care
(X)
State (analog and digital)
Pattern trigger clocked by rising, falling, or alternating between rising and falling edge of one channel
Setup and hold (analog)
Trigger on setup, hold or setup and hold violations in your circuit. Requires a clock and data signal on any two inputs
(except aux or line) channels as trigger sources. Setup and/or hold time must then be specified
Window (analog)
Gbit serial (analog) 1
Video (analog)
Triggers on an event associated with a window defined by two-user adjustable thresholds. Event can be window
"entered," "exited," "inside (time qualified)" or "outside (time qualified)" voltage range. Trigger point can be "cross
window boundary" or "time out." Time qualify range from 250 ps to 10 s
Triggers on bit patterns at rates from 480 Mb/s to 12.5 Gb/s
Generic mode - Trigger up to 160-bit sequence of arbitrary NRZ data (high, low, don’t care)
8b/10b mode - Trigger up to 10 “K” and “D” code symbols. Alignment character is K28.5 (either disparity)
PRBS errors mode - Count accumulated bits and errors, and trigger bit error for PRBS 7, 15, 23, and 31
Triggers from negative sync composite video, field 1, field 2, or alternating fields for interlaced systems, any field,
specified line or any line for interlaced or non-interlaced systems. Support NTSC, PAL-M (525/60), PAL, SECAM
(625/50), EDTV (480p/60), EDTV (576p/50), HDTV (720p/60), HDTV (720p/50), HDTV (1080i/60), HDTV (1080i/50),
HDTV (1080p/60), HDTV (1080p/50), HDTV (1080p/30), HDTV (1080p/25), HDTV (1080p/24) and user-defined
formats
Trigger mode - software
InfiniiScan event identification software
Zone qualify
Software triggers on the user-defined zones on screen. Zones can be specified as either “must intersect” or “must
not intersect.” Up to eight zones can be defined across multiple channels
Generic serial
Software triggers on NRZ-encoded data up to 80-bit pattern. Support multiple clock data recovery methods
including constant frequency, 1st-order PLL, 2nd-order PLL, explicit clock, explicit 1st-order PLL, explicit 2nd-order
PLL, Fibre Channel, FlexRay receiver, FlexRay transmitter (requires E2688A except for the constant frequency clock
data recovery mode)
Measurement limit
Software triggers on the results of the measurement values. For example, when the “pulse width” measurement is
turned on, InfiniiScan measurement software triggers on a glitch as narrow as 40 ps. When the “time interval error
(TIE)” is measured, InfiniiScan can trigger on a specific TIE value
Non-monotonic edge
Software triggers on the non-monotonic edge. The non-monotonic edge is specified by setting a hysteresis value
Runt
Software triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the
first again. Unlike hardware runt trigger, InfiniiScan runt trigger can be further qualified via a hysteresis value
Protocol
Require specified protocol option (I2C, SPI, CAN, LIN, RS-232/UART, SVID, USB, PCIe, SATA, SAS, MIPI, Ethernet,
10G-KR, DVI/HDMI, XAUI, and generic 8b/10b)
1. Models with hardware serial trigger option.
41 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Measurements and math
Oscilloscope measurements
Number of measurements
Measurement update rate
Measurement access
Drop down measurement list
Multipurpose
Drag-and-drop measurement toolbar
Measurement modes
Statistics
Histograms
Source
Orientation
Measurements
Marker modes
Waveform measurements
Voltage (analog)
Time (analog)
Time (digital)
Clock (analog)
Data (analog)
Mixed (analog)
Frequency domain (analog)
Eye (analog)
Level qualification
20 simultaneous measurements (can be made on either main, zoom or gated region)
> 50,000 measurement/sec (one measurement turned on)
> 250,000 measurement/sec (10 measurements turned on)
Measurement menu access to all measurements
Front panel button activates up to 10 pre-selected or up to 10 user-defined measurements
Measurement toolbar with common measurement icons that can be dragged and dropped onto the
displayed waveforms
Displays the current, mean, minimum, maximum, range (max-min), standard deviation, count, edge,
direction, meas window, icon x, and icon y
Waveform or measurement
Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are
defined using waveform markers
Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits,
peak (area of most hits), X scale hits, and X offset hits
Manual markers, track waveform data, track measurements, and delta marker values can be displayed
Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, preshoot, V overshoot,
V preshoot, upper, middle, lower, crossing point voltage, pulse top, pulse base, pulse amplitude
Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt,
channel-to-channel delta time, channel-to-channel phase, count pulses, burst width, burst period, burst
interval, setup time, hold time, edge-edge, edge time, slew rate
Period, frequency, positive width, negative width, duty cycle, delta time
Period, frequency, duty cycle, clock, phase, TIE 1, N-period 1, period-period 1, + width to + width 1, - width
to - width 1, duty cycle- to-duty cycle
Setup time, hold time , time interval error 1, unit interval, noise, N-UI, UI-UI, data rate, clock recovery rate,
DDPWS, de-emphasis
Area, slew rate
FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude, peak detect mode, amplitude
modulation
Eye height, eye width, eye jitter, crossing %, Q factor, duty cycle distortion
Any channels that are not involved in a measurement can be used to level-qualify all timing measurements
1. Requires EZJIT Plus (Option N5400A) or EZJIT Complete (Option N8823A) software.
42 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Measurements and math (Continued)
Oscilloscope measurements
Eye-diagram measurements 1
Jitter analysis measurements 2
Clock
Data
Jitter separation
RJ setting
Mask testing
Math functions
Waveform math
Number of functions
Number of gating functions
Math source
Hardware accelerated math
Operators
FFT
Frequency range
Frequency resolution
Window modes
Number of FFTs
Peak mode
1. 2. 3. 4. Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Time interval error, N-period, period to period, + width to + width, - width to - width, and duty cycle-toduty cycle
Random jitter (RJ), deterministic jitter (DJ), aperiodic bounded uncorrelated jitter (ABUJ), periodic jitter
(PJ), data dependent jitter (DDJ), duty cycle distortion (DCD), intersymbol interference (ISI)
Spectral method (RJ narrow and wide), tailfit
Ability to fix random jitter (RJ) for crosstalk measurements
Allows pass/fail testing to user-defined or Keysight-supplied waveform templates. Automask lets
you create a mask template from a captured waveform and define a tolerance range in time/voltage
or screen divisions. Test modes (run until) include test forever, test to specified time or event limit,
and stop on failure. Executes “multipurpose” user setting on failure. “Unfold real-time eye” feature
will allow individual bit errors to be observed by unfolding a real-time eye when clock recovery is on.
Communications mask test kit option provides a set of ITU-T G.703, ANSI T1.102, and IEEE 802.3
industry-standard masks for compliance testing.
Up to 16 independent functions
Up to 16 horizontal measurement gates (any function can be used as a gate)
Any combination of channels, memories or other functions
Differential and common mode (analog)
Absolute value, add, AM demodulation, average, Butterworth 1, common mode, delay, differentiate,
divide, envelope, FFT magnitude, FFT phase, FIR 1, gating, high pass filter, histogram, integrate, invert,
LFE1, low pass filter (4th-order Bessel Thompson filter), magnify, max, meas trend, min, multiply, RT
Eye 1, smoothing, SqrtSumOfSquare 1, square, square root, subtract, versus, chart (MSO models) and
user-defined function 3, 4
DC to 40 GHz (at 80 GSa/s) or 20 GHz (at 40 GSa/s)
Resolution = sample rate/memory depth
Hanning, flattop, rectangular, Blackman-Harris, Hamming
Display up to 16 FFTs, each in their own grid with up to eight in their own waveform area
Choose peak callouts to display peak values on the screen
Requires Serial Data Analysis (Option E2688A) software.
Requires EZJIT Plus (Option N5400A) or EZJIT Complete (Option N8823A) software.
Requires MATLAB (Option N8831A) software.
Requires user-defined function (Option N5430A) software.
43 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Display, computer system, I/O ports, and file types
Display
Display
Intensity grayscale
Resolution XGA
Annotation
Grids
Waveform windows
Waveform styles
Computer system and peripherals
Operating system
CPU
PC system memory
Storage drive
Peripherals
LXI compliance
12.1-inch color XGA TFT-LCD with capacitive touch screen
256-level intensity-graded display
1024 pixels horizontally x 768 pixels vertically
Up to 100 bookmarks can be inserted into the waveform window. Each can float or be tied to a specific
waveform
Up to 16 waveform grids, each with 8-bit vertical resolution
Up to eight individual waveform windows, allowing up to 128 viewing spaces
Connected dots, dots, infinite persistence, variable persistence, color-graded infinite persistence. Includes
up to 256 levels of intensity-graded waveforms.
Windows 7 64-bit
Intel Core i5-3550S quad core CPU at 3.00 GHz
16 GB DDR3 RAM
Standard 500 GB removable SSD
Optional 1 TB removable SSD (Option 801)
Optical USB mouse and compact keyboard supplied. All Infiniium models support any Windows-compatible
input device with a USB interface
LXI class C
44 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Display, computer system, I/O ports, and file types (Continued)
I/O ports
Ethernet (LAN)
USB
External display
GPIB
Oscilloscope ports
Auxiliary out
Calibration out
Trigger out
Time base reference output
Time base external reference input
(impedance into 50 Ω)
Auxiliary trigger in
Digital channels connector 1
Pattern generator 2
Reference clock in 2
Recovered clock out 2
File types
Analog waveform
Digital waveform
Images
1. MSO models only.
2. Models with hardware serial trigger option.
RJ-45 connector, supports 10BASE-T, 100BASE-T, and 1000BASE-T. Enables Web-enabled remote
control, email on trigger, data/file transfers, and network printing
8 total ports
–– Front panel: Two USB 3.0 host ports and one USB 2.0 host port
–– Back panel: Two USB 3.0 host ports, one USB 3.0 device port and two USB 2.0 ports
–– USB 3.0 port supports up to 200 MB/s data offload
Two ports: One DisplayPort and one VGA video out
Drivers support up to two simultaneous displays
IEEE-488 digital communication bus for instrument control
100 MHz, square wave, PRBS 27-1, PRBS 215-1, PRBS 223-1, and PRBS 231-1
DC (± 2.4 V), 100 MHz, square wave, PRBS 27-1, PRBS 215-1, PRBS 223-1, and PRBS 231-1
Peak-to-peak amplitude into 50 Ω: 2.4 V, offset: 0 V
Peak-to-peak amplitude into 50 Ω: 750 mV, offset: 0 V when derived from the internal reference
Signal amplitude follows reference input when derived from external reference
Amplitude: 178 mV peak to 1 V peak
Frequency: 10 MHz ± 5 ppm high-quality sine wave or square wave
External trigger input
Digital channel inputs
Demo pattern output from the hardware serial trigger
Peak-to-peak amplitude into 50 Ω: 400 mV, offset: 400 mV
External clock reference input to the hardware serial trigger
Peak-to-peak amplitude: 0.8 V to 3.6 V. Voltage range: —0.1 V to 3.7 V
Clock rise and fall time (10 to 90%): 1 ns or faster
Sub-rate clock output generated by the hardware serial trigger
Peak-to-peak amplitude into 50 Ω: 1 V, offset: 0 V
Compressed internal format (*.wfm (200 Mpts))
Comma-separated values (*.csv (2 Gpts))
Tab separated values (*.tsv (2 Gpts))
Public binary format (*.bin (500 Mpts))
Y value file (*.txt (2 Gpts))
Hierarchical data file (*.h5 (2 Gpts))
Composite setup and data file (*.osc (2 Gpts))
Hierarchical data file (*.h5 (2 Gpts)) composite setup and data file (*.osc (2 Gpts))
BMP, PNG, TIFF, GIF, or JPEG
45 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
General and environmental
General characteristics
Temperature
Humidity
Altitude
Vibration
Power
Weight
Dimensions
Safety
Pollution degree
Installation category
Measurement category
Environment
Operating: 5 to +40 °C
Non-operating: —40 to +65 °C
Operating: Up to 95% relative humidity (non-condensing) at +40 °C
Non-operating: Up to 90% relative humidity at +65 °C
Operating: Up to 4,000 meters (12,000 feet)
Non-operating: Up to 15,300 meters (50,000 feet)
Operating random vibration 5 to 500 Hz, 10 minutes per axis, 0.21 g(rms)
Non-operating random vibration 5 to 500 Hz, 10 minutes per axis, 2.0 g(rms); resonant search 5 to 500 Hz
Swept sine, 1 octave/minute sweep rate, (0.50 g), 5 minute resonant dwell at 4 resonances per axis
100 to 240 VAC at 50/60 Hz; input power 800 Watts
Frame: 52.2 lbs. (23.7 kg); shipping: 71.7 lbs. (32.5 kg)
Height: 10.5 in (26.6 cm); width: 17.2 in (43.6 cm); depth: 19.4 in (49.2 cm)
IEC 61010-1:2010/EN 61010-1 3rd Edition
CAN / CSA22.2 No. 61010-1-12
UL Std. 61010-1 (3rd Edition)
2
2
1
For indoor use only
46 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. The business that became Keysight was a founding
member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo
are registered US trademarks of the PCI Industrial Computer Manufacturers
Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web
inside your test systems. The business that became Keysight was a founding
member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Download your next insight
Keysight software is downloadable
expertise. From first simulation through
first customer shipment, we deliver the
tools your team needs to accelerate from
data to information to actionable insight.
–– Electronic design automation (EDA)
software
–– Application software
–– Programming environments
–– Productivity software
Learn more at
www.keysight.com/find/software
Start with a 30-day free trial.
www.keysight.com/find/free_trials
47 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Evolving Since 1939
Our unique combination of hardware, software, services, and people can help you
reach your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight.
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Keysight Services
www.keysight.com/find/service
Keysight Services can help from acquisition to renewal across your
instrument’s lifecycle. Our comprehensive service offerings—one-stop
calibration, repair, asset management, technology refresh, consulting,
training and more—helps you improve product quality and lower costs.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For other unlisted countries:
www.keysight.com/find/contactus
MIPI® service marks and logo marks are owned by MIPI Alliance, Inc. and any use of such
marks by Keysight Technologies is under license. Other service marks and trade names are
those of their respective owners.
DEKRA Certified
PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or service marks
of PCI-SIG.
www.keysight.com/find/V-Series
(BP-6-20-17)
ISO9001 Quality Management System
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2015 - 2017
Published in USA, July 17, 2017
5992-0425EN
www.keysight.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising