Craftsman | LF-20CR | Owners manual | 20 inch high velocity fan

Instruction Manual
GENERAL SAFETY RULES
TABLE OF CONTENTS
Warranty…………………………………………............................Page 2
General Safety Rules.....………………….……............................Page 2-3
20 INCH
HIGH VELOCITY FAN
Description …………………………….……..................................Page 4
Assembly.………………………………………..............................Page 5
Operation....………………………………………...........................Page 5-6
Care And Maintenance …………………………………….............Pages 6
Troubleshooting...........................................................................Page 7
Model No. 129.33121410
CRAFTSMAN ONE YEAR LIMITED WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted against any defects
in material or workmanship. With proof of purchase, a defective product will be replaced
free of charge.
For warranty coverage details to obtain free replacement, visit the web page:
www.craftsman.com/warranty
This ONE YEAR warranty is void if this product is ever used while providing commercial
services or if rented to another person. For 90 DAY commercial and rental use terms,
visit the Craftsman warranty web page.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
GENERAL SAFETY RULES
Please read and understand this entire manual before attempting to assemble, operate or
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
CAUTION: Before using this
product, read this manual and
follow all its Safety Rules
and Operating Instructions.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com
install the product.
WARNING
● Use this product only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electrical shock or injury to persons, and may void the
warranty.
● Always unplug unit before assembly, disassembly or cleaning.
● Always unplug unit when not in use, when moving from one location to another and before
cleaning.
● To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord.
● The use of attachments not recommended or sold by the appliance manufacturer may
cause hazards.
● Avoid contact with moving parts.
CAUTION
● DO NOT operate this product with a damaged cord or plug after a malfunction, or
if it is dropped or damaged in any manner.
● DO NOT operate the unit in the presence of explosive and/or flammable fumes.
● DO NOT place the unit or any parts near an open flame, cooking or other heating
appliance.
● DO NOT leave children unattended near the fan or leave the fan unattended while in
use.
● DO NOT use outdoors.
● Always use on a dry, level surface.
● DO NOT operate if the product housing (front or rear grill or product stand) is removed
or damaged.
● A loose fit between the outlet and plug may cause the plug to overheat. Have a qualified
electrician replace the outlet if the plug doesn't fit properly.
● DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners or
the like. Arrange cord away from traffic areas so that it will not be tripped over.
● NEVER connect the unit to any power sources other than a 120 volt AC polarized
outlet.
● To protect against electrical shock, this appliance is equipped with a cord having a
3-prong grounding-type plug for insertion into a proper 3-prong grounding-type receptacle.
DO NOT alter the plug for use in a 2-prong receptacle. If the plug will not fit into a receptacle,
have the proper receptacle installed by a qualified electrician.
SAVE THESE INSTRUCTIONS!
3
2
OPERATION
ASSEMBLY
DESCRIPTION
1.Use a phillips head screwdriver to attach the two foot pads (BB) to the bottom of the
fan stand (F) with the two screws (AA).
B
C
A
D
HARDWARE USED
E
AA
Screws
x2
BB
Foot Pad
x2
F
TROUBLESHOOTING
3. Insert power cord 3-prong grounding plug into a proper 3-prong grounded 120 volt wall receptacle.
4. To operate the fan, turn the rotary switch control to the desired fan speed (HI, MED, LOW)
(see Fig. 2).
5. Tilt the fan back or forward on the stand to adjust the air output direction.
2
PROBLEM
The fan will
not operate.
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The fan isn’t plugged in and/or 1. Make sure the fan is plugged in and
the electrical outlet isn’t working
/or the electrical outlet is working
properly.
properly.
2. Obstructions are keeping the
fan from working.
1
BB
F
OPERATION
cont.
CARE
AND
MAINTENANCE
Quantity
Part Description
A
Front grill
1
B
Fan blade
1
C
Rear grill
1
D
Rotary switch control
1
E
Motor
1
F
Stand
1
4
AA
OPERATION
1. Make sure the unit is in the OFF position before plugging the unit into the outlet.
2. Place the fan on a dry, level surface.
5
DURING SEASON CARE:
● Before cleaning, be sure to turn off and unplug the unit.
● Keep this unit clean. Carefully wipe the unit with a soft, damp cloth. Please be
very cautious near the motor.
● DO NOT immerse the fan in water and never allow water to drip into the motor housing.
● Never use gasoline, benzene or thinner to clean fan. This will damage the surface
of the unit.
● After cleaning, be sure to completely dry the unit with a soft cloth.
AFTER SEASON CARE:
● Clean unit before storage, then cover with a vinyl bag or place in original shipping
box. Store in a cool, dry place.
6
7
2. Turn off and unplug fan. Visually
inspect for obstructions and remove
if found. Plug fan in and turn on.
Download PDF

advertising