Specktron WDL 3500i
Specktron WDL 3500i
Laser Ultra Short-Throw Projector
!
User’s Manual
Table of Contents
Table of Contents.............................2
Usage Notice....................................3
Safety Information................................3
Precautions..........................................4
Introduction.......................................6
Package Overview...............................6
Product Overview................................7
Main Unit............................................... 7
Control Panel........................................ 8
Input/Output Connections..................... 9
Remote Control................................... 10
Installation...................................... 11
Connecting the Projector...................11
Connect to Computer/Notebook......... 11
Connect to Video Sources.................. 12
Powering the Projector On / Off.........13
Powering On the Projector.................. 13
Powering off the projector.................. 14
Warning Indicator................................ 14
Adjusting the Projected Image...........15
Adjusting the Projector�s Height ........ 15
Adjusting the Projector�s Focus.......... 16
Adjusting Projection Image Size (Diagonal)
17
User Controls.................................18
Control Panel & Remote Control.......18
Control Panel...................................... 18
Remote Control................................... 19
On-screen Display Menus.................21
How to operate .................................. 21
Picture................................................. 22
Screen................................................ 24
Setting................................................. 26
Volume................................................ 28
Options............................................... 30
Options | Laser Settings..................... 32
3D....................................................... 33
Interactive........................................... 34
LAN..................................................... 35
English
2
Multimedia......................................41
Accessing Multimedia Files...............41
How to access Multimedia mode........ 41
Appendices.....................................48
Installing and Cleaning the Optional
Dust Filter..........................................48
Compatibility Modes..........................49
VGA Analog........................................ 49
HDMI Digital........................................ 51
RS232 Commands and Protocol
Function List......................................53
RS232 Port Setting............................. 53
RS232 Signals Connection................. 53
Commands Set List............................ 54
Ceiling Mount Installation...................57
Regulation & Safety Notices..............59
Troubleshooting.................................61
Image Problems.................................. 61
Projector Problems............................. 64
Remote Control Problems.................. 64
Sound Problems................................. 64
3D Problems....................................... 64
On Screen Messages......................... 65
Usage Notice
Safety Information
The lightning flash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1.Do not block any ventilation openings. To ensure reliable operation of
the projector and to protect from over heating, it is recommended to
install the projector in a location that does not block ventilation. As an
example, do not place the projector on a crowded coffee table, sofa,
bed, etc. Do not put the projector in an enclosure such as a book case
or a cabinet that restricts air flow.
2.Do not use the projector near water or moisture. To reduce the risk
of fire and/or electric shock, do not expose the projector to rain or
moisture.
3.Do not install near heat sources such as radiators, heaters, stoves or
any other apparatus such as amplifiers that emits heat.
4.Clean only with dry cloth.
5.Only use attachments/accessories specified by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
 Unit has been dropped.
 Power supply cord or plug has been damaged.
 Liquid has been spilled on to the projector.
 Projector has been exposed to rain or moisture.
 Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards.
7.Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in fire or
electric shock.
8.See projector enclosure for safety related markings.
9.The unit should only be repaired by appropriate service personnel.
3
English
Usage Notice
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
▀■ Warning- Do not look into the projector’s lens when the laser is
on. The bright light may hurt and damage your eyes.
▀■ Warning- To reduce the risk of fire or electric shock, do not
expose this projector to rain or moisture.
▀■ Warning- Please do not open or disassemble the projector as
this may cause electric shock.
English
4
Usage Notice
Do:
 Turn off and unplug the power plug from the AC outlet before
cleaning the product.
 Use a soft dry cloth with mild detergent to clean the display
housing.
 Disconnect the power plug from AC outlet if the product is
not being used for a long period of time.
Do not:
 Block the slots and openings on the unit provided for
ventilation.
 Use abrasive cleaners, waxes or solvents to clean the unit.
 Use under the following conditions:
- In extremely hot, cold or humid environments.
Sea level to 6000 feet
Extremely hot: > 35°C
Extremely cool: < 5°C
6000 feet above
Extremely hot: > 30°C
Extremely cool: < 5°C
Extremely humid: > 70% R.H. (Relative Humidity)
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
5
English
Introduction
Package Overview
Unpack and inspect the box contents to ensure
all parts listed below are in the box. If something
is missing, please contact your nearest customer
service center.
Projector
Power Cord
VGA Cable
电源
确定
菜单
退出
放大
自动
梯形修正
Due to different
applications in
each country,
some regions
may have
different
accessories.
English
6
2 × AAA Batteries
Documentation :
User’s Manual

重设
缩小
信号源
音量
黑屏
图像
画面比例
RGB1
画面冻结
HDMI1
RGB2
Video
HDMI2
IR Remote Control
CD-ROM
(User’s Manual)
Introduction
Product Overview
Main Unit
5
1
2
4
3
9
The interface
is subject to
model’s
specifications
8
6
7
1.
2.
3.
4.
5.
Control Panel
Focus Switch
Ventilation (inlet)
IR Receiver
Ventilation (outlet)
6. Speaker
7. Power Socket
8. Input / Output
Connections
9. Lens
7
English
Introduction
Control Panel
1
2
ON(B)
STANDBY(R)
3
TEMP
4
LASER
5
8
MENU
Enter
7
1.
2.
3.
4.
5.
6.
7.
8.
English
8
Power LED
Enter
Temp LED
Laser LED
Menu
Input
Four Directional Select Keys
Power/Standby button
INPUT
6
Introduction
Input/Output Connections
1
8
The interface
is subject to
model’s
specifications.
Monitor loop
through only
support in VGA1In/YPbPr.
2
9
10
3
11
12
4
13
5
14
6
15
7
16
1. VGA1-In/YPbPr Connector
(PC Analog Signal/Component Video Input/HDTV/YPbPr)
2. HDMI2 Input Connector
3. HDMI1 Input Connector
4. USB Connector (Connect to PC for firmware upgrade)
5.RJ45 Connector
6. USB Type A Connector
7. Power Socket
8. VGA-Out/VGA2-In Connector
9. RS-232 Connector (9-pin DIN Type)
10.Composite Video Input Connector
11. Composite Audio Input (right) Connector
12.Composite Audio Input (left) Connector
13.Audio Output Connector (3.5mm mini Jack)
14.Audio Input Connector (3.5mm mini jack)
15.Audio Input Connector (microphone)
16.KensingtonTM Lock Port
9
English
Introduction
Remote Control
1
2
电源
3
4
确定
5
6
菜单
退出
9
10
14
8
放大
自动
重设
梯形修正
信号源
音量
缩小
15
16
18
20
10
11
12
13
黑屏
图像
画面比例
RGB1
画面冻结
HDMI1
RGB2
Video
HDMI2
24
English
7
23
22
17
19
21
1. Infrared transmitter
2. LED Indicator
3. Power On/Off
4. Enter
5. Four Directional
Select Keys
6. Menu
7. Exit
8. Zoom +
9. Reset
10.Auto
11. input
12. Zoom 13. Volume +/14.Keystone +/15.Image
16.Blank
17.Aspect
18.VGA1
19.HDMI1
20.VGA2
21.HDMI2
22.Video
23.Freeze
24.Numbered keypad
Installation
Connecting the Projector
Connect to Computer/Notebook
Specktron WDL
3500i
Router / Network Switch
MOLEX
5
E62405SP
R
1
Due to the
difference in
applications for
each country,
some regions may
have different
accessories.
(*) Optional
accessory
10
External
Display
Microphone
Audio Output
1................................................................................................*RS232 Cable
2.....................................................................................................VGA Cable
3..................................................................................................*HDMI Cable
4....................................................................................................*USB Cable
5......................................................................................... *Audio Cable/RCA
6.................................................................................................. *RJ45 Cable
7....................................................................................................Power Cord
8........................................................................................*VGA Output Cable
9......................................................................................*Audio Output Cable
10.......................................................................................*Audio Input Cable
11
English
Installation
Connect to Video Sources
Specktron WDL
3500i
DVD Player, Set-top Box,
HDTV receiver
1
2
4
3
E62405SP
R
5
Due to the
difference in
Composite Video Output
applications for
each country,
some regions may
have different
8
accessories.
(*) Optional
accessory
6
Microphone
7
Audio Output
1................................................*15-Pin to 3 RCA Component/HDTV Adaptor
2..................................................................................................*HDMI Cable
3..................................................................................................*Audio Cable
4......................................................................................... *Audio Cable/RCA
5....................................................................................................Power Cord
6................................................................................*Composite Video Cable
7......................................................................................... *Audio Cable/RCA
8.........................................................................................*Audio Input Cable
English
12
Installation
Powering the Projector On / Off
Powering On the Projector
1. Securely connect the power cord and signal cable. When
connected, the POWER/STANDBY LED will turn Orange.

When the power
mode is in standby
mode (power consumption < 0.5W),
the VGA output/
input and audio
will be deactivated
when the projector
is in standby.
2. Turn on the laser by pressing “ ” button either on the projector or on the remote. At this moment, the POWER/STANDBY
LED will now turn Blue.
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you will be asked to
select the preferred language and power saving mode.
3. Turn on and connect the source that you want to display
on the screen (computer, notebook, video player, etc). The
projector will detect the source automatically. If not, push
menu button and go to “OPTIONS”.
Make sure that the “Source Lock” has been set to “Off”.
If you connect multiple sources at the same time, press the
“INPUT” button on the control panel or direct source keys on
the remote control to switch between inputs.
1
Turn on the
projector first and
then select the
signal sources.
POWER/STANDBY
ON(B)
STANDBY(R)
TEMP
LASER
MENU
INPUT
Enter
13
English
Installation
Powering off the projector
1. Press the “ ” button on the remote control or
on the control panel to turn off the projector.
The following message will be displayed on the screen.
Press the “ ” button again to confirm otherwise the
message will disappear after 10 seconds. When you press
the “ ” button for the second time, the fan will start cooling
the system and will shut down.
2. The cooling fans continue to operate for about 4 seconds
for cooling cycle and the POWER/STANDBY LED will flash
Orange. When the POWER/STANDBY LED lights solid
Orange, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “
” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
Warning Indicator
When the warning indicators (see below) come on,
the projector will automatically shutdown:
Contact the
nearest service
center if the
projector displays
these symptoms.
 “LASER” LED indicator is lit red and if “POWER/STANDBY”
indicator flashes amber.
 “TEMP” LED indicator is lit red, this indicates the projector
has overheated. Under normal conditions, the projector can
be switched back on.
 “TEMP” LED indicator flashes red and if “POWER/STANDBY” indicator flashes amber.
Unplug the power cord from the projector, wait for 30 seconds
and try again. If the warning indicator light up again, please
contact your nearest service center for assistance.
English
14
Installation
Adjusting the Projected Image
Adjusting the Projector�s Height
The projector is equipped with elevator feet for adjusting
the image height.
1.Locate the adjustable foot you wish to modify on the
underside of the projector.
2. Rotate the adjustable ring clockwise to raise the projector
or counter clockwise to lower it. Repeat with the remaining
feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
15
English
Installation
Adjusting the Projector�s Focus
To focus the image, slide the focus switch to left/right until the
image is clear.
WXGA series: The projector will focus at distances from
1.413 to 1.884 feet (0.428 to 0.571 meters).
Focus switch
English
16
Installation
Adjusting Projection Image Size (Diagonal)
WXGA series: Projection Image Size from 85” to 115” (2.15
to 2.91 meters).
Top View
Dia
go
Height
Screen
Screen (W)
na
l
Width
Projection Distance (D)
Projection Distance (D)
Screen
Screen (H)
Offset (Hd)
Side View
Screen
Screen (H)
Offset (Hd)
Projection Distance (D)
Specktron WDL
3500i
Screen Size W x H
Projection Distance (D)
Diagonal length
(inch) size of
16:10 Screen
Width
Height
Width
Height
Wide
Tele
Wide
Tele
(mm)
85
1831.0
1144.0
72.1
45.0
232.0
NA
9.1
NA
255.0
10.0
87
1874.0
1171.0
73.8
46.1
244.0
NA
9.6
NA
259.0
10.2
(mm)
(inch)
(mm)
Offset (Hd)
(feet)
(inch)
90
1939.0
1212.0
76.3
47.7
261.0
NA
10.3
NA
266.0
10.5
95
2046.0
1279.0
80.6
50.4
290.0
NA
11.4
NA
277.0
10.9
100
2153.0
1346.0
84.8
53.0
318.0
NA
12.5
NA
289.0
11.4
105
2262.0
1414.0
89.1
55.7
347.0
NA
13.7
NA
300.0
11.8
110
2369.0
1481.0
93.3
58.3
375.0
NA
14.8
NA
311.0
12.2
115
2477.0
1548.0
97.5
60.9
403.0
NA
15.9
NA
322.0
12.7
 This table is for user’s reference only.
17
English
User Controls
Control Panel & Remote Control
Control Panel
ON(B)
STANDBY(R)
TEMP
LASER
MENU
INPUT
Enter
Using the Control Panel
English
POWER
Refer to the “Power On/Off the Projector”
section on pages 13-14.
Enter
Press “Enter” to confirm your item selection.
INPUT
Press “INPUT” to select an input signal.
MENU
Press “MENU” to launch the on-screen display
(OSD) menu. To exit OSD, press “MENU” again.
Four Directional
Select Keys
to select items or make
Use
adjustments to your selection.
LASER LED
Refer to the LED indicator of the projector light
source status.
TEMP LED
Refer to the LED indicator of the projector
temperature status.
ON/STANDBY
LED
Refer to the LED indicator of the projector
power status.
18
User Controls
Remote Control
Using the Remote Control
电源
确定
菜单
自动
Sends signals to the projector.
LED
LED Indicator.
Power
Refer to the “Power On/Off the
Projector” section on pages 13-14.
Exit
Press “Exit” to close the OSD menu.
Zoom +
Zoom in the projector display.
Reset
Return the adjustments and settings to
the factory default values. (except for
laser counter)
Zoom -
Zoom out the projector display.
Enter
Confirm your item selection.
Input
Press “Source” to select an input
signal.
Auto
Automatically synchronizes the
projector to the input source.
Four Directional
Select Keys
to select items or make
Use
adjustments to your selection.
Keystone +/-
Adjust image distortion caused by tilting
the projector.
Volume +/-
Adjust to increase / decrease the
volume.
Aspect
Use this function to choose your desired aspect ratio.
Menu
Press “Menu” to launch the on-screen
display (OSD) menu. To exit OSD,
press “Menu” again.
退出
放大
梯形修正
Infrared transmitter
重设
缩小
信号源
音量
黑屏
图像
画面比例
RGB1
画面冻结
HDMI1
RGB2
Video
HDMI2
19
English
User Controls
Using the Remote Control
电源
VGA1
Press “VGA1” to choose VGA IN 1
connector.
Blank
Momentarily turns off/on the audio and
video.
HDMI1
Press “HDMI1” to choose HDMI IN 1
connector.
HDMI2
Press “HDMI2” to choose HDMI IN 2
connector.
VGA2
Press “VGA2” to choose VGA IN 2
connector.
Video
Press “Video” to choose Composite
video source.
Freeze
Pause the screen image. Press again
to resume the screen image.
Image
Select the display mode from
Presentation, Bright, Eco, sRGB and
User .
确定
菜单
退出
放大
自动
梯形修正
重设
缩小
信号源
音量
黑屏
图像
画面比例
RGB1
画面冻结
HDMI1
RGB2
Video
HDMI2
English
20
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus that
allow you to make image adjustments and change a variety of
settings.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
Projector Keypad.
2 When OSD is displayed, use the
keys to select any item in
the main menu. While making a selection on a particular page,
press the
3. Use the
or “Enter” key to enter sub menu.
keys to select the desired item and adjust the
settings using the
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Enter” to confirm, and the screen will return to the main
menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Settings
Sub Menu
21
English
User Controls
Picture
Color Mode
There are many factory presets optimized for various types of images. Use the ◄ or ► button to select the item.
Bright: For brightness optimization.
PC: For meeting presentation.
Movie: For playing video content.
Game: For game content.
User: Memorize user’s settings.
Wall Color
Use this function to choose a proper color according to the wall. It
will compensate the color deviation due to the wall color to show the
correct image tone.
Brightness
Adjust the brightness of the image.
Press the ◄ button to darken image.
Press the ► button to lighten the image.
Contrast
The Contrast controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount
of black and white in the image.
Press the ◄ button to decrease the contrast.
Press the ► button to increase the contrast.
English
22
User Controls
Sharpness
Adjust the sharpness of the image.
Press the ◄ button to decrease the sharpness.
Press the ► button to increase the sharpness.
Saturation
Adjust a video image from black and white to fully saturated color.
Press the ◄ button to decrease the amount of saturation in the
image.
Press the ► button to increase the amount of saturation in the
image.
Hue
“Sharpness”,
“Saturation” and
“Hue” functions
are only supported
under video mode.
Adjust the color balance of red and green.
Press the ◄ button to increase the amount of green in the image.
Press the ► button to increase the amount of red in the image.
Gamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
23
English
User Controls
Screen
Aspect Ratio
Auto: Keep the image with original width-height ratio and maximize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed
using a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
16:10: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:10 ratio.
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
Clock
Change the display data frequency to match the frequency of your
computer’s graphic card. Use this function only if the image appears to flicker vertically.
H. Position
Press the ◄ button to move the image left.
Press the ► button to move the image right.
English
24
User Controls
V. Position
Press the ◄ button to move the image down.
“H. Position” and
Press the ► button to move the image up.
“V. Position” ranges
will depend on input Digital Zoom
source.
Press the ◄ button to reduce the size of an image.
Press the ► button to magnify an image on the projection screen.
V. Keystone
Press the ◄ or ► button to adjust image distortion vertically. If
the image looks trapezoidal, this option can help make the image
rectangular.
Ceiling Mount
Front: The image is projected straight on the screen.
Front Ceiling: This is the default selection. When selected, the
image will turn upside down.
Rear: When selected, the image will appear reversed.
Rear Ceiling: When selected, the image will appear reversed in
upside down position.
25
English
User Controls
Setting
Language
Choose the multilingual OSD menu. Press the ◄ or ► button
into the sub menu and then use the ▲ or ▼ button to select your
preferred language. Press ► on the remote control to finalize the
selection.
Menu Location
Choose the menu location on the display screen.
Closed Caption
Use this function to enable close caption menu. Select an appropriate closed captions option: Off, CC1, CC2, CC3, CC4.
VGA OUT (Standby)
Choose “On” to enable VGA OUT connection.
English
26
User Controls
LAN (Standby)
Choose “On” to enable LAN connection. Choose “Off” to disable LAN connection.
VGA B (Function)
It will be changed to VGA B Port when setting input.
It will be changed to VGA out when setting output.
Test Pattern
Display a test pattern.
Reset
Choose “Yes” to return the parameters on all menus to the factory
default settings.
27
English
User Controls
Volume
Speaker
On: Choose “On” to play sound through the built-in speaker.
Off: Choose “Off” to disable sound to be played through the
built-in speaker.
Line out
On: Choose “On” to play sound through the external speakers.
Off: Choose “Off” to disable sound to be played through the
external speakers.
Microphone
On: Choose “On” to enable sound from the microphone.
Off: Choose “Off” to disable sound from the microphone.
Mute
On: Choose “On” to turn mute on.
Off: Choose “Off” to turn mute off.
English
28
User Controls
Volume
Press the ◄ button to decrease the volume.
Press the ► button to increase the volume.
Microphone Volume
Press the ◄ button to decrease the microphone Volume.
Press the ► button to increase the microphone Volume.
29
English
User Controls
Options
Logo
Use this function to set the desired startup screen. If changes are
made they will take effect the next time the projector is powered
on.

For successful logo
capture, please
ensure that the
onscreen image
does not exceed
the projector’s
native resolution.
(WXGA:1280x800).
Default: The default startup screen.
User: Use stored picture from “Logo Capture” function.
Logo Capture

“Logo Capture” is not
available when 3D is
enabled.

Before active this
function, it is recommended that “Aspect
Ratio” is set to the
“Auto”.
Press ► button to capture an image of the picture currently displayed on screen.
Auto Source
On: The projector will search for other signals if the current input
signal is lost.
Off: The projector will only search current input connection.
Input
Press ► button to enable/disable input sources. The projector will
not search for inputs that are not selected.
English
30
User Controls
Auto Power Off (Min)
Sets the countdown timer interval. The default value is 20 minutes.
The countdown timer will start, when there is no signal being sent
to the projector. The projector will automatically power off when the
countdown has finished (in minutes).
Laser Setting
Refer to page 32.
High Altitude
On: The built-in fans run at high speed. Select this option when
using the projector at altitudes above 2500 feet/762 meters or
higher.
Off: The built-in fans automatically run at a variable speed according to the internal temperature.
Filters Remind (Hour)
Filters Remind (Hour): Set the filter reminder time
Cleaning Up Reminder: Select “Yes” to reset the dust filter hour
counter after replacing or cleaning the dust filter.
Information
Display the projector information for model name, SNID, source,
resolution, software version, color space and aspect ratio on the
screen.
31
English
User Controls
Options |
Laser Settings
Laser Hours Used (Normal)
Display the projection time of normal mode.
Laser Hours Used (ECO)
Display the projection time of ECO mode.
Laser Power Mode
Normal: Normal mode.
ECO: Use this function to dim the projector laser which will
lower power consumption and extend the laser life.
Clear Laser Hours
Choose “Yes” to reset the Laser hour counter.
English
32
User Controls
3D
3D
Auto: When a HDMI1.4a 3D timing identification signal is detected, the 3D image is selected automatically.
Choose “Off” to disable 3D function.
Choose “On” to enable 3D function.
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.

“Frame Sequential”
is supported the DLP
Link 3D input signals 3D Format
from VGA / HDMI
Use this feature to select the 3D format. Options are: “Frame
connector.
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame Sequen-

“Frame Sequential”
tial” and “Field Sequential”.
/ “Field Sequential”
are supported the
1080p @24
HQFS 3D input sigUse this feature to select 96 or 144Hz refresh rate as using 3D
nals from Composite/
glasses in the1080p @ 24 frame packing.
Svideo connector
connector.

“Frame Packing” /
“Side-by-Side(Half)”
/ “Top and Bottom”
are supported from
HDMI 1.4a 3D input
signals.
33
English
User Controls
Interactive
Interactive Settings
The Interactive function is
available when
displaying graphic
source from
HDMI/VGA input.
Other sources are
not supported.
If “3D” function is
enabling, “Interactive” feature is
disabling.
Interaction function: Please
specify that the Interaction function
is only for USTi
model. The Interaction function is
not available in
the UST model.
English
34
Choose “On” to enable Interactive function.
Choose “Off” to disable Interactive function.
You need to unplug the Mini USB cable that connects NB/desktop
with the projector before using the Interactive function. After you
complete the Interactive Settings in OSD, use Mini USB cable to
connect NB/desktop with the projector.
User Controls
LAN
Status
Display the network connection status.
DHCP
Configure the DHCP settings.
On: Choose “On” to let the projector to obtain an IP address
automatically from your network.
Off: Choose “Off” to assign IP, Subnet Mask, Gateway, and DNS
configuration manually.
IP Address
Display an IP address.
Subnet Mask
Display the subnet mask number.
Gateway
Display the default gateway of the network connected to the projector.
DNS
Display the DNS number.
MAC Address
Display the MAC address.
35
English
User Controls
Group Name
Display the group name.
Projector Name
Display the projector name.
Location
Display the projector location.
Contact
Display the contact information.
English
36
User Controls
How to use web browser to control your projector
1. Turn on DHCP to allow a DHCP
server to automatically assign an IP, or
manually enter the required network
information.
4. Based on network web-page for the
input-string in [tools] tab, the limitation
for Input-Length is in the below list
(“space” and the other punctuation key
included):
Category
Crestron Control
2. Then choose apply and press
button to complete the configuration
process.
3. Open your web browser and type in IP
Address from the OSD LAN screen then
the web page will display as below:
Projector
Network
Configuration
User Password
Admin Password
Input-Length
(characters)
Item
IP Address
15
IP ID
2
Port
5
Projector Name
10
Location
9
Assigned To
9
DHCP (Enabled)
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
DNS Server
15
Enabled
(N/A)
New Password
15
Confirm
15
Enabled
(N/A)
New Password
15
Confirm
15

When you used the projector IP
address, you will can not link to your
service server.
37
English
User Controls
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to
exit.
Step 3: To open Network Connections,
click Start, click Control Panel,
click Network and Internet
Connections, and then click
Network Connections. Click the
connection you want to configure,
and then, under Network Tasks
, click Change settings of this
connection.
Step 4: On the General tab, under
This connection uses the
following items, click Internet
Protocol (TCP/IP), and then click
“Properties.”
Step 6: To open Internet Options, click IE
web browser, click Internet Options,
click the Connections tab and click
“LAN Settings...”.
Step 7: The Local Area Network (LAN)
Setting dialog box appears. In the
Proxy Server area, cancel the
Use a proxy server for your LAN
check box, then click “OK” button
twice.
Step 5: Click Use the following IP
address, and type in as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.254
English
38
Step 8: Open your IE and type in the IP
address of 192.168.0.100 in the
URL then press “Enter” key.
User Controls
Crestron RoomView Control Tool
Crestron RoomView™ provides a central monitoring station for 250+
control systems on a single Ethernet network (more are possible,
the number depends on the combination of IP ID and IP address).
Crestron RoomView monitors each projector, including projector’s
online status, system power, laser life, network setting and hardware
faults, plus any custom attribute as defined by the Administrator.
The Administrator can add, delete, or edit room information, contact
information and events, which are logged automatically by the
software for all users. (Operation UI as following image)
1. Main Screen
2. Edit Room

Crestron RoomView’s function is
set according to the
products’ models and
specifications.
39
English
User Controls
3. Edit Attribute
4. Edit Event
For further information, please visit:
http://www.crestron.com & www.crestron.com/getroomview.
English
40
Multimedia
Accessing Multimedia Files
This projector supports two methods to project the media files
(photos, videos, music, documents) stored on following devices:
a. via Wireless dongle (optional) - wirelessly access the media files
stored on your mobile phone, tablet PC, notebook, or desktop.
b. via USB flash drive - directly access the media files stored in the
device.
How to access Multimedia mode
1. Plug a wireless dongle or a USB flash drive into the USB connector
E62405SP
R
at the back of projector.
2. Press “INPUT” on the remote control or on the control panel to turn
on the projector. When the Input menu appears, press the
keys to select “Multimedia” and the “Enter” key to confirm.
41
English
Multimedia
Mobile Display
To access the media files stored on your mobile device or tablet
PC, do the folllowing:
1. On Multimedia menu, select Mobile/Tablet.
2. On your mobile device or tablet PC, download “EZview”
application App Store (iOS) or Play Store (Android).
3. Enable your mobile device or tablet PC WiFi function, and
search the AP name listed in the Wi-Fi network list.
4. On the initial connection, you will be prompted to enter a
password. Enter the password.
5. Launch “EZview” application and enter the PCTOOL password.
6. Wait until the connection is established. The media files on
your mobile device or tablet PC can be accessed using the
projector.
English
42
Multimedia
Laptop Display
To access the media files stored on your laptop/notebook, do the
folllowing:
1. On Multimedia menu, select Laptop.
2. Enable your laptop/notebook WiFi function, and search the AP
name listed in the Wi-Fi network list.
3. On the initial connection, you will be prompted to enter a
password. Enter the password.
4. Open your web browser and enter the IP address. Then select
“Wifi” on the left side of the screen and install application
required by the operation system.
5. Launch “EZview” application and enter the control code shown
on the right-bottom side of the screen.
43
English
Multimedia
6. Wait until the connection is established. The media files on your
laptop/notebook can be accessed using the projector.
Desktop Display
To access the media files stored on your desktop, do the
folllowing:
1. On Multimedia menu, select Desktop.
2. Open your web browser and enter the IP address. Then select
“Wifi” on the left side of the screen and install application
required by the operation system.
English
44
Multimedia
3. Launch “EZview” application and enter the control code shown
on the right-bottom side of the screen.
4. Wait until the connection is established. The media files on your
desktop can be accessed using the projector.
USB Storage Display
To access the media files stored on your USB flash drive, do the
folllowing:
Supported File Format
Multimedia Category
File Format
Photo
BMP, JPG, PNG
Music
MP3, WMA
Video
AVI, MOV, MP4, RM, RMVB, DAT, MPG,
ISO, TS, MKV, VOB, and WMV
Document
WORD, EXCEL, PPT, PDF
1. On Multimedia menu, select USB Disk.
2. Use the
keys to select the file category and press the
“Enter” key.
45
English
Multimedia
3. Use the
keys to select the file to view/play and press the
“Enter” key to confirm.
Configuring Multimedia Settings
To change the settings, do the folllowing:
1. On Multimedia menu, select Settings.
English
46
Multimedia
2. Use the
keys to select the desired menu option and
press the “Enter” key to enter the submenu.
System: Select this option to view the firmware version and
update firmware.
Video: Select this option to change the display ratio and set
the repeat mode.
Photo: Select this option to change the display ratio,
slideshow pattern, and slideshow duration.
Music: Select this option to set the repeat mode­.
WiFi: Select this option to configure the Wi-Fi connection.
3. Use the
keys to select the adjust/select the setting and
press the “Enter” key to confirm.
47
English
Appendices
Installing and Cleaning the Optional
Dust Filter
We recommend you clean the dust filter every 500 hours of
operation, or more often if you are using the projector in a
dusty environment.
When the warning message appears on the screen, do the
following to clean the air filter:
The optional dust
filter should be
used in dusty
environments.

If the dust filter is
installed, a proper
maintenance will
prevent overheating and projector
malfunction.

The dust filter is
optional.

The specific interfaces are selected
in terms of the
specifications of
types.
2
1
1
2
Air Filter Cleaning Procedure:
1. Switch off the power to the projector by pressing the “ ” button.
2. Disconnect the power cord.
3. Pull out the dust filter, as shown in the illustration. 1
4. Carefully remove the dust filter. Then clean or change the filter. 2
To install the filter, reverse the previous steps.
5. Turn on the projector and reset the filter usage counter after the dust filter is
replaced.
English
48
Appendices
Compatibility Modes
 VGA Analog
a. PC signal
Modes
VGA
IBM
SVGA
Apple, MAC II
XGA
Apple, MAC II
Resolution
V. Frequency [Hz] H. Frequency [Hz]
640x480
60
31.5
640x480
67
35.0
640x480
72
37.9
640x480
75
37.5
640x480
85
43.3
720x400
70
31.5
800x600
56
35.1
800x600
60
37.9
800x600
72
48.1
800x600
75
46.9
800x600
85
53.7
832x624
75
49.1
1024x768
60
48.4
1024x768
70
56.5
1024x768
75
60.0
1024x768
85
68.7
1024x768
120
99.0
1152x870
75
68.7
1280x1024
60
64.0
1280x1024
72
77.0
1280x1024
75
80.0
1280x960
60
60.0
1280x960
75
75.2
SXGA+
1400x1050
60
65.3
UXGA
1600x1200
60
75.0
SXGA
QuadVGA
49
English
Appendices
b. Extended wide timing
Modes
WXGA
WSXGA+
Resolution
V. Frequency [Hz] H. Frequency [Hz]
1280x720
60
44.8
1280x800
60
49.6
1366x768
60
47.7
1440x900
60
59.9
1680x1050
60
65.3
c. Component signal
Modes
Resolution
480i
720x480
(1440x480)
59.94(29.97)
15.7
576i
720x576
(1440x576)
50(25)
15.6
480p
720x480
59.94
31.5
576p
720x576
50
31.3
720p
1080i
1080p
English
50
V. Frequency [Hz] H. Frequency [Hz]
1280x720
60
45.0
1280x720
50
37.5
1920x1080
60(30)
33.8
1920x1080
50(25)
28.1
1920x1080
23.98/24
27.0
1920x1080
60
67.5
1920x1080
50
56.3
Appendices
 HDMI Digital
a. PC signal
Modes
VGA
IBM
SVGA
Apple, MAC II
XGA
Resolution
V. Frequency [Hz] H. Frequency [Hz]
640x480
60
31.5
640x480
67
35.0
640x480
72
37.9
640x480
75
37.5
640x480
85
43.3
720x400
70
31.5
800x600
56
35.1
800x600
60
37.9
800x600
72
48.1
800x600
75
46.9
800x600
85
53.7
832x624
75
49.1
1024x768
60
48.4
1024x768
70
56.5
1024x768
75
60.0
1024x768
85
68.7
1024x768
120
99.0
Apple, MAC II
1152x870
75
68.7
1280x1024
60
64.0
SXGA
1280x1024
72
77.0
1280x1024
75
80.0
1280x960
60
60.0
1280x960
75
75.2
SXGA+
1400x1050
60
65.3
UXGA
1600x1200
60
75.0
QuadVGA
51
English
Appendices
b. Extended wide timing
Modes
WXGA
WSXGA+
Resolution
V. Frequency [Hz] H. Frequency [Hz]
1280x720
60
44.8
1280x800
60
49.6
1366x768
60
47.7
1440x900
60
59.9
1680x1050
60
65.3
c. Video signal
Modes
Resolution
480p
640x480
59.94/60
31.5
480i
720x480
(1440x480)
59.94(29.97)
15.7
576i
720x576
(1440x576)
50(25)
15.6
480p
720x480
59.94
31.5
576p
720p
1080i
1080p
V. Frequency [Hz] H. Frequency [Hz]
720x576
50
31.3
1280x720
60
45.0
1280x720
50
37.5
1920x1080
60(30)
33.8
1920x1080
50(25)
28.1
1920x1080
23.98/24
27.0
1920x1080
60
67.5
1920x1080
50
56.3
d. HDMI 1.4a mandatory 3D timing- Video Signal
Modes
Frame
Packing
Side-bySide(Half)
Top and
Bottom
English
52
Resolution
720p
V. Frequency [Hz] H. Frequency [Hz]
50
31.5
720p
59.94/60
15.7
1080p
23.98/24
15.6
1080i
50
31.5
1080i
59.94/60
31.3
720p
50
45.0
720p
59.94/60
37.5
1080p
23.98/24
33.8
Appendices
RS232 Commands and Protocol
Function List
 RS232 Port Setting
Items
RS232 shell is
grounded.
Method
Communication Method
Asynchronous Communication
Bits per seconds
19200
Data bits
8 bits
Parity
None
Stop bits
1
Flow control
None
 RS232 Signals Connection
Computer COM Port
(D-Sub 9pin connector)
Projector COM Port
(D-Sub 9pin connector)
53
English
Appendices
 Commands Set List
Command
Description
Power
ASCII Code
#0000 n
Projector
Return
n value
0 : Off
1 : On
Emulate Remote #0001 n
1 : Up
2 : Left
3 : Right
4 : Down
5 : Menu
6 : Source
7 : Keystone+
8 : Keystone9 : Volume+
10 : Volume-
Resync
#0002 1
AV Mute (Blank)
#0003 n
0 : Off
1 : On
Freeze
#0004 n
0 : Unfreeze
1 : Freeze
#0005 n
Color Mode
#0010 n
Brightness
#0011 n
0~100
Contrast
#0012 n
0~100
Sharpness
#0013 n
0~31
54
VGA only
1 : VGA 1
2 : VGA 2
3 : HDMI 1
4 : HDMI 2
5 : Video
6 : Multimedia
1 : Bright
2 : PC
3 : Movie
4 : Game
5 : User
Input Source
English
Note
Video only
Appendices
Aspect Ratio
#0020 n
1 : Auto
2 : 4:3
3 : 16:9
4 : 16:10 / Ultra Wide
Zoom
#0021 n
0 : Zoom1 : Zoom+
Keystone
#0022 n
-40~40
#0023 n
1 : Front
2 : Rear
3 : Front Ceiling
4 : Rear Ceiling
Ceiling Mount
1 : English
2 : German
3 : Swedish
4 : French
5 : Arabic
6 : Dutch
7 : Norwegian
8 : Danish
9 : Simplified Chinese
10 : Polish
11 : Korean
12 : Russian
13 : Spanish
14 : Traditional Chinese
15 : Italian
16 : Portuguese
17 : Turkish
18 : Japanese
1 : Top Left
2 : Top Right
3 : Center
4 : Bottom Left
5 : Bottom Right
Language
#0030 n
Menu Location
#0031 n
Reset
#0032 1
Mute
#0040 n
0 : Off
1 : On
Volume
#0041 n
0~30
55
English
Appendices
Microphone
Volume
Auto Power Off
(min)
#0042 n
0~30
#0050 n
0~120
High Altitude
#0051 n
0 : Off
1 : On
Color Mode
Read
#00110 1
Okn
Aspect Ratio
Read
#00120 1
Okn
Input Source
(curr. src)
#00160 1
Okn
Sofware Version
#00161 1
Okddd
Information
English
56
#00162 1
n : 1/2/3/4/5 = Bright
/ PC / Movie / Game /
User
n : 1/2/3/4 = Auto / 4:3
/ 16:9 / 16:10 (Ultra
Wide)
n : 0/1/2/3/4/5/6 =
None / VGA1 / VGA2 /
HDMI1 / HDMI2 / Video
/ Multimedia
ddd : FW version
a : Power Status / b
: LD Hour / c : Input
Okabbbbccdddee
Source / d : Firmware
Version / e : Color mode
Step = 5
Appendices
Ceiling Mount Installation
1. To prevent damage to your projector, please use the ceiling
mount.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attach a mount to the projector
meet the following specifications:
Screw type: M4*4
Minimum screw length: 10mm
Please note that
damage resulting
from incorrect
installation will void
the warranty.
Warning:
1. If you buy a ceiling
mount from another
company, please
be sure to use the
correct screw size.
Screw size will vary
depending on the
thickness of the
mounting plate.
2. Be sure to keep
at least 10 cm gap
between the ceiling
and the bottom of the
projector.
3. Avoid installing the
projector near a heat
source.
57
English
Appendices
1874
110
244
554
310
382
554
244
310
110
215
259
259
1874
1171
1171
87”
2389
2389
2130
2130
16:10
959
2262
110
347
657
310
382
657
347
310
110
215
300
300
2262
1414
1414
105”
2673
2673
2373
2373
16:10
959
English
58
Appendices
Regulation & Safety Notices
This appendix lists the general notices of your projector.
1.This device may not cause harmful interference and
2.This device must accept any interference received,
including interference that may cause undesired
operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian
ICES-003.
Remarque à l’intention des utilisateurs
canadiens
Cet appareil numerique de la classe B est conforme a la
norme NMB-003 du Canada.
Declaration of Conformity for EU
countries
• EMC Directive 2004/108/EC (including amendments)
• Low Voltage Directive 2006/95/EC
• R & TTE Directive 1999/5/EC (if product has RF function)
Disposal instructions
Do not throw this electronic device into the
trash when discarding. To minimize pollution
and ensure utmost protection of the global
environment, please recycle it.
59
English
Appendices
Safety notice
English
60
Appendices
Troubleshooting
If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or
service center.
Image Problems
o image appears on-screen
N
`` Ensure all the cables and power connections are correctly and securely
connected as described in the “Installation” section.
`` Ensure the pins of connectors are not crooked or broken.
`` Ensure that the “Blank” feature is not turned on.
artial, scrolling or incorrectly displayed image
P
`` Press “Auto” on the remote control.
yy If you are using a PC:
-- For Windows 95, 98, 2000, XP, Windows 7:
111 Open the “My Computer” icon, the “Control Panel” folder, and
then double click on the “Display” icon.
222 Select the “Settings” tab.
333 Verify that your display resolution setting is lower than or equal to
1080p.
444 Click on the “Advanced Properties”.
-- For Windows Vista:
111 From the “My Computer” icon, open the “Control Panel” folder,
and double click the “Appearance and Personalization”
222 Select “Personalization”.
333 Click “Adjust screen resolution” to display “Display Settings”.
Click on the “Advanced Settings”.
61
English
Appendices
-- If the projector is still not projecting the whole image, you will also
need to change the monitor display you are using. Refer to the
following steps.
111 Select the “Change” under the “Monitor” tab.
222 Click on “Show all devices”. Next, select “Standard monitor types”
under the SP box; choose the resolution mode you need under
the “Models” box.
333 Verify that the resolution setting of the monitor display is lower
than or equal to 1080p.
yy If you are using a Notebook:
-- First, follow the steps above to adjust resolution of the computer.
-- Press the toggle output settings. example: [Fn]+[F4]
Notebook Brand
Function Keys
Acer
[Fn]+[F5]
Asus
[Fn]+[F8]
Dell
[Fn]+[F8]
Gateway
[Fn]+[F4]
IBM/Lenovo
[Fn]+[F7]
HP/Compaq
[Fn]+[F4]
NEC
[Fn]+[F3]
Toshiba
[Fn]+[F5]
Mac Apple
System Preference -> Display ->
Arrangement -> Mirror display
yy If you experience difficulty changing resolutions or your monitor freezes,
restart all equipment including the projector.
he screen of the Notebook or PowerBook computer is not displaying
T
your presentation
Some Notebook PCs may deactivate their own screens when a second display
device is in use. Each has a different way to be reactivated. Refer to your computer’s documentation for detailed information.
Image is unstable or flickering
`` Adjust the “Phase” to correct it. Refer to the “Screen” section for more
information (VGA Input).
`` Change the monitor color setting from your computer.
English
62
Appendices
Image has vertical flickering bar
`` Use “Clock” to make an adjustment. Refer to the “Screen” section for more
information.
`` Check and reconfigure the display mode of your graphic card to make it
compatible with the product.
Image is out of focus
`` Adjust the “Focus Ring” on the projector lens.
`` Make sure the projection screen is within the required distance. Refer to
Page 7.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best
image in 16: 9 format on projector side.
`` If you play 4:3 format DVD title, please change the format as 4:3 in projector
OSD.
`` If the image is still stretched, you will also need to setup the display format
as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
`` Move the projector closer to or further from the screen.
`` Press “Menu” on the remote control or on the control panel. Go to “Screen” -->
“Aspect Ratio”and try the different settings.
Image has slanted sides:
`` If possible, reposition the projector so that it is centered on the screen and
below the bottom of the screen.
`` Use “Screen” --> “V Keystone” from the OSD to make an adjustment.
Image is reversed
`` Select “Screen” --> “Ceiling Mount” from the OSD and adjust the projection
direction.
63
English
Appendices
Projector Problems
The projector stops responding to all controls
`` If possible, turn off the projector, then unplug the power cord and wait at
least 20 seconds before reconnecting power.
Remote Control Problems
If the remote control does not work
`` Check the operating angle of the remote control is within ±30° both horizontally and vertically of one of the IR receivers on the projector.
`` Make sure there are not any obstructions between the remote control and
the projector. Move to within 7 m (±0°) of the projector.
`` Make sure the batteries are inserted correctly.
`` Replace batteries if they are exhausted.
Sound Problems
If no sound from the projector
`` If you are playing an external source, make sure you have an audio cable
securely connected between the source device and the projector’s audio
input.
`` Please make sure the external speakers are not connected.
`` Make sure the volume is not set to minimum.
`` Make sure the “Volume --> Mute” function is set to “Off”.
3D Problems
Blurry double image
`` Select “3D” --> “3D” from OSD and choose “Off” to avoid normal 2D image
is blurry double image.
Two images, Side-by-Side(Half) format
`` Select “3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 33.
English
64
Appendices
Image does not display in 3D
`` Check if the battery of 3D glasses is drained.
`` Check if the 3D glasses is turned on.
`` Select “3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 33.
On Screen Messages
yy Power off confirm
Power Off?
Press power key again.
yy Fan lock error
Warning! FAN LOCKED
The proejctor will switch off automatically.
yy No source found
VGA 1
No Source Found
yy Out of display range
VGA
Out of display range
yy Over temperature
Warning! TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
65
English
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement