Chapter 05 Torque wrenches

Chapter 05 Torque wrenches
Luna_torque.fm Page 427 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
5
Torque wrenches
TORQUE WRENCHES
Torque wrenches/-screwdrivers
Click torque wrenches
Torque wrench
"Teng Tools" Torque wrench manufactured according to ISO 6789. Accuracy ±3 %.
Art. no.
14387
-0061
-0087
-0103
Teng Tools
No
3892Q060
3892Q100
1292Q200
Drivesquare
inch
3/8
3/8
½
Torque range ISO
Nm
10-60
20-100
40-200
Torque range Imperial
lbf-ft
10-50
20-70
30-150
Length
mm
400
400
483
Weight
kg
0.8
0.8
1.2
Pack.
qty
1
1
1
-0202
1292Q320
½
50-320
50-230
550
1.8
-
Torque wrench
"Teng Tools" With ratchet - by which the torque wrench can be used for both full tightening, and the final check
of the tightening torque. Reversible with lever, but only right-hand action for torque checking. Equipped with
angle gauge for post tightening. Graduated in Nm and Ibf.ft. Lockable setting. Accuracy ± 4%. Satin finish for the torque
setting to be easier to read. Degree scale for post tightening of cylinder heads, etc.
No 1292AG-ER and 1292AG-E4R with torque control for both right and left-hand action.
TTX1292 supplied in plastic case with space for sockets.
Individual calibration certificate enclosed with each torque wrench.
Art. no.
7319
-0035
-0050
-0076
Teng Tools
No
1492AG-E
3892AG-E1
3892AG-E3
Torque range ISO
Nm
5-25
5-25
20-100
Torque range Imperial
Ibf.ft
4-18
4-18
15-75
Drive sizesquare
inch
¼
3/8
3/8
Total length
mm
277
277
368
Pack.
qty
1
1
1
Repair set ERK
7319
-1009
-1108
-1207
Pack.
qty
1
10
10
Art. no.
7319
-0100
-0175
-0191
Teng Tools
No
TTX1292
1292AG-ER
1292AG-EP
Torque range ISO
Nm
40-210
40-200
40-210
Torque range Imperial
Ibf.ft
30-160
30-150
30-160
Drive sizesquare
inch
½
½
½
Total length
mm
465
465
465
Pack.
qty
1
1
1
Repair set ERK
7319
-1306
-1603
-1306
Pack.
qty
10
10
10
Art. no.
7319
-0209
-0258
-0274
Teng Tools
No
1292AG-E4
1292AG-E4R
3492AG-E
Torque range ISO
Nm
70-350
70-350
90-450
Torque range Imperial
Ibf.ft
50-250
50-250
67-340
Drive sizesquare
inch
½
½
¾
Total length
mm
632
632
850
Pack.
qty
1
1
1
Repair set ERK
7319
-1405
-1702
-1801
Pack.
qty
10
10
1
427
Luna_torque.fm Page 428 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
Art. no.
Teng Tools
Torque range ISO
Torque range Imperial
Drive sizesquare
Total length
Pack.
Repair set ERK
Pack.
7319
No
Nm
Ibf.ft
inch
mm
qty
7319
qty
-0282
3492AG-ER
90-450
60-300
¾
850
1
-1900
1
-0308
3492AG-E1
140-700
100-500
¾
1065
1
-1504
1
-0407
3492AG-E2
140-980
100-700
¾
1213
1
-1504
1
Torque wrench set
"Teng Tools" Set consisting of torque wrench, 10 crow foot spanners, bit socket, 8 TX-bits and extension bars 75
and 125 mm. Individual calibration certificate enclosed.
Supplied in TC TC tray suitable for Teng Tools tool boxes and tool trolleys.
Art. no.
10211
-0104
Teng Tools
No
TTX3892
Drive size square
inch
3/8
Torque range ISO
Nm
20-110
Torque range Imperial
lbf.ft
15-75
Length of torque wrench
mm
365
Crow foot spanners
mm
10 11 12 13 1415 16 17 18 19
Bits for TX heads
TX
8 10 15 20 25 27 30 40
Case size LxWxH
mm
560x110x60
Weight
kg
0.9
Pack.
sts
1
Repair set
7319
-1207
Pack.
qty
10
Click torque wrench with scale and ratchet head
"Norbar" Professional series with scale and ratchet head. Comfortable and soft handle for better grip. Easy
read scale in two units (ISO and Imperial). All components are fully designed for industrial use. Compact ratchet heads.
Torque wrenches conform to or exceed the current ISO 6789 standard.
Delivered in plastic box with calibration certificate.
Art. no.
12125
-0104
-0203
(-0302)
-0401
Norbar
No
13010
13011
13012
13013
Torque range ISO
Nm
8-60
8-60
20-100
20-100
Torque range Imperial
lbf.ft
5-45
5-45
15-80
15-80
Length
mm
307
307
347
347
Ratchet head in both directions
inch
3/8
½
3/8
½
Weight
kg
0.6
0.6
0.7
0.7
Pack.
qty
1
1
1
1
Art. no.
12125
-0500
-0609
-0708
-0807
Norbar
No
13014
13047
13049
13050
Torque range ISO
Nm
40-200
60-300
60-330
80-400
Torque range Imperial
lbf.ft
30-150
45-220
45-250
60-300
Length
mm
443
570
683
683
Ratchet head in both directions
inch
½
½
½
¾
Weight
kg
1.0
1.4
1.4
2.0
Pack.
qty
1
1
1
1
Click torque wrench with scale and ratchet head
"Norbar" Large professional series with scale and ratchet head. The series provides light torque wrenches
for their measurement range. The wrenches are also length independent. Easy-to-read and adjustable scale. Extension
handle included as standard (not 12168-0102) to facilitate tightening high torque. The torque wrenches conform to or
exceed the current ISO 6789 standard for torque wrenches.
Supplied with calibration certificate.
Art. no.
12168
(-0102)
(-0201)
(-0300)
-0607
Norbar
No
14001
14015
14002
14005
Torque range ISO
Nm
110-550
200-800
300-1000
500-1500
Torque range Imperial
lbf.ft
80-400
150-600
220-750
370-1100
Length
mm
845
1035
1250
1570
Length incl. extension handle
mm
1535
1750
2070
Ratchet head in both directions
inch
¾
¾
¾
1
Weight
kg
4.0
5.2
5.8
6.7
Pack.
qty
1
1
1
1
428
Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 429 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
"Rahsol" Type DREHMOMETER Mini . For precision tightening of screws and bolts. For right-hand action. With
auatomatic shortpath actration with tactile impulse and audible signal. Fine setting is done with an adjusting screw with
setting lock. The scale is graduated in Nm and lbf-inch. Appropriate for precision engineering, electronics, optical industry, etc. Individual calibration certificate enclosed. Accuracy ±3% tolerance of scale set torqu.
No 753-03 Set. Contains in addition to the torque wrench 753-01, 8 x ¼"-sockets, 13 bit sockets, screwdriver handle
¼", extension bars 55 and 100 mm as well as ratchet head 754-00. Supplied in plastic case.
Art. no.
0329
-0103
Rahsol
No
753-01
Torque range ISO
Nm
1-12
Torque range Imperial
lbf.in
10-100
Drivesquare
inch
¼
Length
mm
185
Pack.
qty
1
Set
0329
-0202
Rahsol
No
753-03
Socket dim. (drive square-¼)
mm
4 5 5.5 67 8 9 10
Spärrhuvud
tum
¼
Socket with slotted heads
mm
0.8×4 1.0×5.5 1.2×6.5
Socket for hexagonal holes
mm
3456
Socket for Phillips head
No
123
Socket for Torx head
TX
20 27 30
Weight
kg
0.96
Pack.
set
1
Torque wrenches
Torque wrench
5
Torque wrench
"Rahsol" Type Torcoflex K. With ratchet function - adjustable for both right and left-hand action by pushing the
drive through the head. Double signal device (touch-sound), which is given off when the set tightening torque has been
reached. The scale (recessed and protected in the shaft) is graduated for direct reading in Nm and lbf.foot. The torque
is set by turning the handle. Individual calibration certificate enclosed. Accuracy guaranteed to ±3 %. Supplied in plastic
box.
Art. no.
11035
-0055
-0105
-0204
-0303
Rahsol
No
3550-07
3550-10
3550-20
3550-30
Torque range ISO
Nm
8-70
10-100
20-200
60-300
Torque range Imperial
lbf.ft
6-52
8-75
15-150
45-220
Drive sizesquare
inch
3/8
½
½
½
Total length
mm
350
395
485
575
Pack.
qty
1
1
1
1
Spare square drive
11035
-1004
-1103
-1103
-1103
Pack.
qty
1
1
1
1
Torque wrench
"Rahsol" Type Torcofix K. With ratchet function - adjustable with lever for both right and left-hand action. Double
signal device (touch-sound), which is given off when the set tightening torque has been reached. The scale (recessed and
protected in the shaft) is graduated for direct reading in Nm. The micrometer is set with a lever in the handle. Individual
calibration certificate enclosed. Accuracy guaranteed to ±3 %.
Art. no.
5124
-0042
-0125
-0141
Rahsol
No
4549-01
4549-02
4549-05
Torque range ISO
Nm
1-5
2-25
5-50
Torque range Imperial
lbf.ft
0.75-3.7
1.5-18
4-37
Drive sizesquare
inch
¼
¼
3/8
Total length
mm
220
285
335
Pack.
qty
1
1
1
Spare square drive
5124-1008
5124-1008
5124-1107
Pack.
qty
1
1
1
Art. no.
5124
-0158
-0208
-0307
Rahsol
No
4550-10
4550-20
4550-30
Torque range ISO
Nm
10-100
20-200
60-300
Torque range Imperial
lbf.ft
8-75
15-150
45-220
Drive sizesquare
inch
½
½
½
Total length
mm
395
485
575
Pack.
qty
1
1
1
Spare square drive
5124-1206
5124-1206
5124-1206
Pack.
qty
1
1
1
Art. no.
5124
-0406
-0505
-0604
Rahsol
No
4550-40
4550-55
4550-75
Torque range ISO
Nm
75-400
100-550
140-750
Torque range Imperial
lbf.ft
55-300
75-405
105-550
Drive sizesquare
inch
½
¾
¾
Total length
mm
665
690
1200
Pack.
qty
1
1
1
Spare square drive
5124-1206
1178-0400
1178-0400
Pack.
qty
1
1
1
429
Luna_torque.fm Page 430 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
Torque wrench
"Rahsol" Type Torcofix UK. With ratchet-head function - adjustable for both right and left-hand action. Double
signal device (touch-sound), which is given off when the set tightening torque has been reached. The scale (recessed and
protected in the shaft) is graduated for direct reading in Nm and lbf.foot. The torque is set by turning the handle. Individual calibration certificate enclosed.
Accuracy guaranteed to ±3%. Supplied in transparent plastic box.
Art. no.
11034
-0106
-0205
-0304
Rahsol
No
5550-10
5550-20
5550-30
Torque range ISO
Nm
20-100
40-200
60-300
Torque range Imperial
lbf.ft
15-75
30-150
45-220
Drive sizesquare
inch
½
½
½
Total length
mm
410
500
590
Pack.
qty
1
1
1
Torque wrench
"Rahsol" Type DREMOMETER. Made of aluminium. Only for right-hand action apart from model no. 8568-01 and
8579-10. Double signal device (touch-sound), which is given off when the set tightening torque has been reached. The
scale (which is recessed and protected in the shaft) is set using a hexagon key, which sits in the handle. Lockable setting.
Graduated scales for Nm and lbf-in or lbf. Accuracy guaranteed to ±3%. Individual calibration certificate enclosed.
No 8568-01 DRL. Equipped with extension tube adjustable length 1100-1400 mm. Intended among others for tightening wheel bolts on trucks. With double square drive for bi-directional tightening.
No. 8564-01 E. Supplied with 2 extension tubes.
No 8579-01 DXL, 8579-10 DSL. with doublesquare drive for bi-directional tightening.
DK (Blue). With button to release the socket which is locked.
RM (Gold). Automatic indication of the need to calibrate according to EN ISO 6789:2003. 12 months or 5000 operations. The sensor is activated with the first operation. LED shows the need of calibration.
K (Red). Ratchet head with 24 teeth for right-left operation.
Art. no.
1749
-0053
-0103
-0202
-0251
Rahsol
No
8554-01 AM
8560-01 A
8561-01 B
8573-00 BC²)
Torque range ISO
Nm
6-30
8-40
20-120
40-200
Torque range Imperial
lbf.in
50-270
70-350
For tightening torque
lbf.ft
15-90
30-150
Drive sizesquare
inch
¼
3/8
½
½
Total length
mm
265
340
463
553
Pack.
qty
1
1
1
1
Art. no.
1749
-0269
-0277
-0285
-0301
Rahsol
No
8573-2005 DK
8573-2005 RM
8573-2005 K
8562-10 C
Torque range ISO
Nm
40-200
40-200
40-200
50-300
Torque range Imperial
lbf.in
For tightening torque
lbf.ft
30-150
30-150
30-150
35-220
Drive sizesquare
inch
½
½
½
½
Total length
mm
553
553
553
618
Pack.
qty
1
1
1
1
Art. no.
1749
-0350
-0400
-0459
-0467
Rahsol
No
8570-10 CD
8563-10 D
8568-01 DRL 8574-10 DS
Torque range ISO
Nm
80-360
140-760
140-760
110-550
Torque range Imperial
lbf.in
For tightening torque
lbf.ft
60-260
105-560
105-560
80-405
Drive sizesquare
inch
¾
¾
¾
¾
Total length
mm
718
812
800-1400
812
Pack.
qty
1
1
1
1
Art. no.
1749
-0483
-0475
(-0491)
-0509
Rahsol
No
8579-10 DSL
8571-01 DX
8576-01 DXL 8564-01 E
Torque range ISO
Nm
110-550
520-1000
520-1000
750-2000
Torque range Imperial
lbf.in
For tightening torque
lbf.ft
80-405
380-730
380-730
Drive sizesquare
inch
¾
¾
¾
1
Total length
mm
812
800-1400
800-1400
1078¹)
Pack.
qty
1
1
1
1
Torque wrench with scale - for replaceable end spanners Ø 22 mm
"Norbar" Large professional series with scale - for replaceable end spanners Ø 22 mm. The series provides light torque wrenches for their measurement range. The wrenches are also length independent. Easy-to-read and
adjustable scale. The torque wrenches conform to or exceed the current ISO 6789 standard for torque wrenches. Supplied in steel case and with calibration certificate.
Art. no.
12169
-0200
Norbar
No
14012
Torque range ISO
Nm
110-550
Torque range Imperial
lbf-ft
80-400
Length
mm
780
Attachment for replaceable end spanner
mm
Ø 22
Weight
kg
3.6
Pack.
qty
1
430
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 431 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
"Norbar" Professional series without scale with ratchet head. Comfortable and soft handle for better grip.
All components are fully designed for industrial use. Compact ratchet heads. Torque wrenches conform to or exceed
the current ISO 6789 standard.
Supplied with calibration certificate.
Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12117
-0104
-0401
-0500
Norbar
No
11164
11171
11138
Torque range ISO
Nm
8-60
8-60
10-100
Torque range Imperial
lbf.ft
5-45
5-45
8-80
Length
mm
286
286
326
Ratchet head in both directions
inch
3/8
½
3/8
Weight
kg
0.6
0.6
0.7
Pack
qty
1
1
1
Art. no
12117
-0609
-0708
-0906
-1003
Norbar
No
11139
11140
13057
13056
Torque range ISO
Nm
10-100
20-200
30-300
40-400
Torque range Imperial
lbf.ft
8-80
15-150
22-220
30-300
Length
mm
326
423
663
663
Ratchet head in both directions
inch
½
½
½
¾
Weight
kg
0.7
1.0
1.45
2
Pack
qty
1
1
1
1
Torque wrenches
Click torque wrench without scale with ratchet head
5
For replaceable end spanners with rectangular drive
Torque wrench for replaceable spanner end fittings with rectangular end
"Rahsol" Type Torcofix-SE. With rectangular cavity for direct insertion of spanners end fittings with rectangular
end. Right and left-hand action. Ergonomically shaped convenient black plastic handgrip. Set by turning the handle. Graduation in Nm and lbf-foot. Trips with signal (touch-sound). Sight window with magnifier and additional micrometer scale
with a Nm graduation of 0,1; 0,25; 0,5 or 1 Nm. Accuracy ± 3%. Supplied without plug-in tools. Individual calibration
certificate enclosed.
Art. no.
0310
-0120
-0153
-0203
-0302
-0401
-0500
Rahsol Torcofix-SE
No
4101-02 4101-05 4100-01 4201-01 4300-01 4301-01
For tightening torque ISO
Nm
2-25
5-50
10-100
20-200
60-300
75-400
For tightening torque Imperial
lbf.ft
1.5-18
4-37
8-75
15-150
45-220
55-300
For tools with drive
mm
9×12
9×12
9×12
14×18
14×18
14×18
Scale graduation
Nm
0.1
0.25
0.5
1.0
1.0
1.0
Length
mm
285
325
375
475
565
650
Weight
kg
0.3
0.45
0.6
0.9
1.2
1.6
Pack.
qty
1
1
1
1
1
1
Torque wrench for replaceable spanner end fittings with rectangular end
"Rahsol" Type Torcofix FS. With rectangular cavity for direct insertion of spanner end fittings with rectangular
end. (With permanently set tightening torque which is stated when ordering the wrench). Right and
left-hand action. Precision ±3%. Supplied without plug-in tools. Individual calibration certificate enclosed.
NOTE: The required tightening torque must be stated when ordering.
Luna will preset the required torque on request, see services - torque wrench.
Art. no.
0314
-0100
-0209
-0308
-0407
Rahsol Torcofix-FS
No
4150-25
4150-50
4150-85
4151-20
Tightening torque min.-max. ISO
Nm
2-25
5-50
15-85
20-200
For tools with drive
mm
9×12
9×12
9×12
14×18
Length
mm
180
240
320
400
Pack
qty
1
1
1
1
For replaceable end spanners with round drive
Click torque wrenches with scale, for replaceable end spanners Ø 16 mm
"Norbar" Professional series with scale - for replaceable end spanners Ø 16 mm. Comfortable and soft
handle for better grip. Easy read scale in two units (ISO and Imperial). All components are fully designed for industrial
use. Compact ratchet heads. Torque wrenches conform to or exceed the current ISO 6789 standard. Supplied with
calibration certificate.
Suitable replaceable end spanners see 12234.
Art. no.
12116
-0204
-0303
-0402
-0501
Norbar
No
13018
13019
13020
13021
Torque range ISO
Nm
8-60
20-100
40-200
60-300
Torque range Imperial
lbf.ft
5-45
15-80
30-150
45-220
Length
mm
301
340
423
548
Attachment for replaceable end spanner
mm
Ø 16
Ø 16
Ø 16
Ø 16
Weight
kg
0.6
0.6
0.8
1.1
Pack.
qty
1
1
1
1
431
Luna_torque.fm Page 432 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
Click torque wrench without scale - for replaceable end spanners Ø 16 mm
"Norbar" Professional series without scale - for replaceable end spanners Ø 16 mm. Comfortable and
soft handle for better grip. Easy read scale in two units (ISO and Imperial). All components are fully designed for industrial
use. Compact ratchet heads. Torque wrenches conform to or exceed the current ISO 6789 standard. Supplied with
calibration certificate.
Suitable replaceable end spanners see 12235.
Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12118
-0202
-0301
-0400
-0509
Norbar
No
11167
11143
11144
11117
Torque range ISO
Nm
8-60
10-100
20-200
30-300
Torque range Imperial
lbf.ft
5-45
8-80
15-150
22-220
Length
mm
280
320
402
640
Attachment for replaceable end spanner
mm
Ø 16
Ø 16
Ø 16
Ø 16
Weight
mm
0.6
0.6
0.8
1.1
Pack
qty
1
1
1
1
Breaking torque wrenches
Breaking torque wrench with scale and ratchet head
"Norbar" Industrial series with scale and ratchet head. Robust torque wrench with breaking action when the
torque is reached. As the torque tool bends when the torque is reached you receive a lower over torque. The torque
wrenches conform to or exceed the current ISO 6789 standard for torque wrenches. Supplied with calibration certificate.
Art. no.
12122
-0206
-0305
-0404
-0602
Norbar
No
12001
12006
12007
12009
Torque range ISO
Nm
100-500
150-700
200-800
300-1000
Torque range Imperial
lbf.ft
70-350
100-500
150-600
200-750
Length
mm
910
1150
1250
1475
Ratchet head for both directions
inch
¾
¾
¾
¾
Weight
kg
5.2
6.3
6.4
7.3
Pack.
qty
1
1
1
1
Breaking torque wrench with scale for replaceable end spanners
"Norbar" Industrial series with scale - for replaceable end spanners Ø 22 mm. Robust torque wrench
with breaking action when the torque is reached. As the torque tool bends when the torque is reached you receive a
lower over torque. The torque wrench conforms to or exceeds the current ISO 6789 standard for torque wrenches.
Supplied with calibration certificate.
Suitable replaceable end spanners see 12235.
Art. no.
12122
(-0107)
Norbar
No
12003
Torque range ISO
Nm
130-550
Torque range Imperial
lbf.ft
100-400
Length
mm
935
Attachment for replaceable end spanner
mm
Ø 22
Weight
kg
4.6
Pack.
qty
1
Breaking torque wrench
"Torqueleader" TBNS2 and TBNS10 are breaking torque wrenches that gradually break when the torque is reached
and thereby reduces the additional torque. The torque wrench is well adapted for light assembly production and is only
available without a scale. The torque wrenches are equipped with a removable collar that gives the freedom to choose
breaking angles of either 20° with automatic return or 90° with manual return. The tool satisfies or exceeds the latest
ISO 6789 standard. The torque wrenches can only be supplied with calibration certificate with permanently mounted
end spanner. This series is also offered with signal transmission when the torque is reached. When the torque wrench
trips a switch is activated and the tool sends a fixed current signal indicating the tool has tripped. This signal can be used
as an acknowledgement that the torque wrench has tightened the torque or used to light a lamp or be sent to a PLCsystem further processing. Signal transmission can be performed via cable or via radio (see table for more information).
Torque wrenches without signal transmission are ESD-approved. The torque wrench is supplied without a spanner as
standard.
Art. no.
13924
-0105
(-0204)
(-0303)
-0402
(-0501)
(-0600)
Torqueleader
No
048800
048803
048802
0488900
0488903
0488902
Torque range ISO
Nm
0.2-2
0.2-2
0.2-2
1-10
1-10
1-10
Torque range Imperial
lbf.in
1.8-18
1.8-18
1.8-18
9-89
9-89
9-89
Signal via cable
yes
yes
Signal via AM radio
yes
yes
Length without spanner
mm
133
220
160
133
220
160
Attachment for replaceable end spanner mm
Ø8
Ø8
Ø8
Ø8
Ø8
Ø8
Weight
kg
0.135
0.2
0. 3
0.135
0.2
0.3
Straight cable 6.25 m
yes
yes
ESD-approved
yes
yes
Pack
qty
1
1
1
1
1
1
432
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 433 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
Breaking torque wrench
"Torqueleader" TBN25, 65 and 135 are breaking torque wrenches gradually break when the torque is reached and
thereby reduces the additional torque. The torque wrench is well adapted for assembly production and is only available
without a scale. The tool satisfies and exceeds the latest ISO 6789 standard and is supplied with a calibration certificate.
This series is also offered with signal transmission when the torque is reached. When the torque wrench trips a switch
is activated and the tool sends a fixed current signal indicating the tool has tripped. This signal can be used as an acknowledgement that the torque wrench has tightened the torque or used to light a lamp or be sent to a PLC-system for further
processing. Signal transmission can be performed via cable or via radio (see table for more information). Torque wrenches without signal transmission are ESD-approved. The torque wrench is supplied without a spanner as standard.
Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12152
-0100
-0209
-0308
Torqueleader
No
050000
050100
050200
Torque range ISO
Nm
5-25
10-65
20-135
Torque range Imperial
lbf.in
44-221
89-575
177-1195
Signal via cable
Signal via AM-signal
Length without spanner
mm
265
302
408
Attachment for replaceable end spanner
mm
Ø 16
Ø 16
Ø 16
Weight
kg
4.05
0.75
1.05
Straight cable 6.25 m
ESD-approved
yes
yes
yes
Pack
qty
1
1
1
Art. no
12189
-0024
-0040
-0065
Torqueleader
No
050003
0501103
050203
Torque range ISO
Nm
5-25
10-65
20-135
Torque range Imperial
lbf.in
44-221
89-575
177-1195
Signal via cable
yes
yes
yes
Signal via AM-signal
Length without spanner
mm
345
377
483
Attachment for replaceable end spanner
mm
Ø 16
Ø 16
Ø 16
Weight
kg
0.565
0.9
0.1.120
Straight cable 6.25 m
yes
yes
yes
ESD-approved
Pack
qty
1
1
1
Art. no
12189
(-0107)
(-0305)
(-0503)
Torqueleader
No
050002
0501102
050202
Torque range ISO
Nm
5-25
10-65
20-135
Torque range Imperial
lbf.in
44-221
89-575
177-1195
Signal via cable
Signal via AM-signal
yes
yes
yes
Length without spanner
mm
345
377
483
Attachment for replaceable end spanner
mm
Ø 16
Ø 16
Ø 16
Weight
kg
0.565
0.9
1.120
Straight cable 6.25 m
ESD-approved
Pack
qty
1
1
1
Torque wrenches
For replaceable end spanners Ø 16 mm
5
Accessories for signal torque wrenches
Accessories for signal torque wrenches
"Torqueleader" SDU is a wall or bench mounted signal delay unit for torque wrenches with cables to adjust the signal
reception time from torque wrenches and in doing so assure the most appropriate signal transmission. In addition to
adjustable time the unit also features coloured lamps, it can also be connected to external equipment with higher voltage.
Integrated battery with monitoring.
Signal delay unit
12158
-1284
Torqueleader
No
C12870
Pack.
qty
1
6.25 m cable with connector
12155
(-5403)
-5452
Cable model
straight
spiral
Pack.
qty
1
1
433
Luna_torque.fm Page 434 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
Accessories for radio torque wrenches
Accessories for radio torque wrenches
"Torqueleader" TALS-2 radio receiver for radio torque wrenches. Each unit can handle 4 torque wrenches with simultaneous radio signals. A display shows the operator the number of tightening operations from each torque wrench.
Detailed information is also available for each tool using pushbuttons. Each channel is equipped with an adjustable time
relay, 0.25 to 2 seconds.
Radio receiver unit
12189 (-0602)
Torqueleader
No
051000
Pack.
qty
1
Accessories
12189 -0701
-0800
Torqueleader
No
A15860
P24370
Description
transmitter and antenna guard
battery for radio transmitter spanner
Pack.
qty
1
1
Slipping torque wrenches
Slipping torque wrench
"Torqueleader" TSC and TSP are slipping torque wrenches and give much less excessive torque when the torque
wrench releases at the attained setting. They are also length independent. They give very high joint accuracy. Special
models without scales, which are preset, are not operator dependent when tightening. Grip friendly handle. The tool
satisfies and exceeds the ISO 6789 standard and is supplied with a calibration certificate. ESD-approved tool.
No 13132. Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12131-0106
12131-0205
(12132-0105) 12132-0204
Torqueleader
type
TSC
TSC
TSP
TSP
Torqueleader
No
056020
056040
056090
056100
Torque range ISO
Nm
1-5
2-10
1-5
2-10
Torque range Imperial
lbf.in
10-45
20-90
With scale
yes
yes
Without scale
yes
yes
Drive, square-drive with ratchet
inch
¼
¼
¼
¼
Weight
kg
0.24
0.24
0.19
0.19
ESD-approved
yes
yes
yes
yes
Length
mm
195
195
185
185
Pack
qty
1
1
1
1
Slipping torque wrench
"Torqueleader" TSN is a series of slipping torque wrenches and give much less excessive torque when the torque
wrench releases at the attained setting. They are also length independent. They give very high joint accuracy. All models
are without scales. Are not operator dependent when tightening. Grip friendly handle. The tool satisfies and exceeds
the latest ISO 6789 standard and is supplied with a calibration certificate. This series is also offered with signal transmission when the torque is reached. When the torque wrench trips a switch is activated and the tool sends a fixed current
signal indicating the tool has tripped. This signal can be used as an acknowledgement that the torque wrench has tightened the torque or used to light a lamp or be sent to a PLC-system for further processing. Signal transmission can be
performed via cable or via radio (see table for more information).
Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12114-0107
12114-0305
(12114-0404)
Torqueleader
No
011017
011035
011055
Torque range ISO
Nm
3-25
15-55
40-125
Torque range Imperial
lbf.in
24-216
120-480
360-1080
Signal via cable
Signal via AM-radio
Length
mm
216
324
460
Drive, ratchet with square-drive
inch
¼
3/8
½
Weight
kg
0.34
0.8
1.36
Straight cable
Pack
qty
1
1
1
Art. no
12187-0026
12187-0042
12187-0067
Torqueleader
No
011003
011033
011053
Torque range ISO
Nm
3-25
15-55
40-125
Torque range Imperial
lbf.in
27-216
120-480
360-1080
Signal via cable
yes
yes
yes
Signal via AM-radio
Length
mm
403
463
592
Drive, ratchet with square-drive
inch
¼
3/8
½
Weight
kg
0.49
0.95
1.51
Straight cable
yes
yes
yes
Pack
qty
1
1
1
Art. no
(12187-0109)
(12187-0307)
(12187-0406)
Torqueleader
No
011066
011086
011096
Torque range ISO
Nm
3-25
15-55
40-125
Torque range Imperial
lbf.in
24-216
120-480
360-1080
Signal via cable
434
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 435 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
mm
inch
kg
qty
yes
403
¼
0.49
1
yes
463
3/8
0.95
1
yes
592
½
1.51
1
Preset torque wrenches
Preset torque wrenches - ½" square-drive
"Teng Tools" Set of four preset torque wrenches. According to ISO 6789. Accuracy ±4%. Satin finsih. Rubber handle. Separate wall rack included. Supplied in PS tray suitable for Teng Tools tool boxes and tool trolleys.
Art. no.
14386
-0104
Teng Tools
No
TTPSTQ04
Number of torque wrenches
qty
4
Square drive
inch
½
Preset torque
Nm
90, 110, 120, 140
Length of torque wrenches
mm
513
Case size LxWxH
mm
570x262x73
Weight
kg
5.8
Pack.
1
Torque wrenches
Signal via AM-radio
Length
Drive, ratchet with square-drive
Weight
Straight cable
Pack
5
Control torque wrenches
Mechanical
Control torque wrench
"Torqueleader" The DS-series - a robust series of control torque wrenches. Manufactured of aluminium for a low
weight in relation to size. Overload protected against incorrect use. Easily read scale with guide indicator. Length independent. The tool conforms to or exceeds the ISO 6789 standard and supplied with calibration certificate. Wrenches
010100-010440 supplied in a plastic box.
¹) Includes extension handle.
Art. no.
12113
(-0108)
-0207
(-0306)
(-0603)
-0702
Torqueleader
No
010100
010120
010140
010200
010240
Torque range ISO
Nm
0.8-4
1.6-8
2.4-12
5-25
8-40
Torque range Imperial
lbf.ft
4-20
6-30
Torque range Imperial
lbf.in
7-35
14-70
24-120
Length
mm
244
244
244
244
244
Height with ratchet head
mm
61
61
61
69
69
Ratchet head with square-drive
inch
¼
¼
¼
3/8
3/8
Visual and audio signal
ESD-approved
yes
yes
yes
yes
yes
Weight
kg
0.52
0.52
0.52
0.52
0.52
Pack.
qty
1
1
1
1
1
Art. no.
12113
(-0900)
(-1106)
(-1205)
(-1254)
-1304
Torqueleader
No
010320
010400
010340
010420
010360
Torque range ISO
Nm
16-80
16-80
32-160
32-160
40-200
Torque range Imperial
lbf.ft
12-60
12-60
24-120
24-120
30-160
Torque range Imperial
lbf.in
Length
mm
435
440
515
520
515
Height with ratchet head
mm
86
86
86
86
86
Ratchet head with square-drive
inch
½
½
½
½
½
Visual and audio signal
yes
yes
ESD-approved
Weight
kg
1.35
1.49
1.35
1.54
1.41
Pack.
qty
1
1
1
1
1
Art. no.
12113
-1403
(-1502)
(-1601)
(-1700)
(-1809)
Torqueleader
No
010440
010520
010620
010700
010720
Torque range ISO
Nm
40-200
80-400
160-800
280-1400 400-2000
Torque range Imperial
lbf.ft
30-160
60-300
120-600
200-1000 300-1500
Torque range Imperial
lbf.in
Length
mm
520
710
1000
2040 ¹)
2040 ¹)
Height with ratchet head
mm
86
111
123
138
138
Ratchet head with square-drive
inch
½
¾
¾
1 fixed
1 fixed
Visual and audio signal
yes
yes
yes
yes
yes
ESD-approved
Weight
kg
1.54
3.15
4.85
16.7
16.7
Pack.
qty
1
1
1
1
1
435
Luna_torque.fm Page 436 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
Electronic (digital)
Torque wrench - electronic
"Rahsol" Type Torcotronic. For left and right-hand action. Adjustable microprocessor controlled electronic
torque wrench with CE-symbol. Clearly readable LCD-display. Simple calibration function. High measurement accuracy:
±1% tolerance of all read - off values, ±1 digit.
Supplied in plastic case with test certificate.
Art. no.
10309
-0056
-0106
Rahsol
No
8450-020
8450-030
For tightening torque ISO
Nm
20-200
30-300
Drive sizesquare
inch
½
½
Length
mm
508
575
Weight
kg
1.2
1.4
Pack.
qty
1
1
Electronic torque wrench
"BMS" PADDY electronic torque wrenches with micro processor control. Suitable for torque measurements and
quality assurance within torque measurement.
Large alphanumeric display. Accuracy ±1% of the read value within 10-100% of the stated capacity. Can be used for right
and left action. Audio and visual signals warn when the torque wrench approaches and reaches the set value. Powered
by 4 AA batteries. Recalibration interval can be chosen either as a period or number of cycles. For more detailed information see the following overview.
Art. no.
13934
(-0103)
-0202
(-0301)
BMS
No
E3010
E3020
E3050
Torque range ISO
Nm
1-10
2-20
5-50
No. of measuring ranges
ea.
10
10
10
No. of program operations
ea.
3
3
3
Units: cNm, Nm, Kgfcm, ozins, lbins, Lbft
X
X
X
Lit display
X
X
X
Audio and visual signal
X
X
X
Automatic zero point
X
X
X
Calibration warning, date or cycles
X
X
X
Accuracy better than 1%, 10% from end positions
X
X
X
Standard and accumulator batteries
X
X
X
Automatic shutoff
X
X
X
Overload warning
X
X
X
Functions: Trac, 0-reset, Units
X
X
X
Rectangular drive
mm
9x12
9x12
9x12
Length
mm
410
410
410
Weight
kg
0.67
0.67
0.67
Pack.
qty
1
1
1
Art. no.
13934
-0400
(-0509)
-0608
BMS
No
E3100
E3135
E3150
Torque range ISO
Nm
10-100
13.5-135
15-150
No. of measuring ranges
ea.
10
10
10
No. of program operations
ea.
3
3
3
Units: cNm, Nm, Kgfcm, ozins, lbins, Lbft
X
X
X
Lit display
X
X
X
Audio and visual signal
X
X
X
Automatic zero point
X
X
X
Calibration warning, date or cycles
X
X
X
Accuracy better than 1%, 10% from end positions
X
X
X
Standard and accumulator batteries
X
X
X
Automatic shutoff
X
X
X
Overload warning
X
X
X
Functions: Trac, 0-reset, Units
X
X
X
Rectangular drive
mm
9x12
9x12
14x18
Length
mm
415
415
570
Weight
kg
0.73
0.73
1.2
Pack.
qty
1
1
1
Art. no.
13934
(-0707)
(-0806)
-0905
BMS
No
E3200
E3300
E3340
Torque range ISO
Nm
20-200
30-300
34-340
No. of measuring ranges
ea.
10
10
10
No. of program operations
ea.
3
3
3
Units: cNm, Nm, Kgfcm, ozins, lbins, Lbft
X
X
X
Lit display
X
X
X
Audio and visual signal
X
X
X
Automatic zero point
X
X
X
Calibration warning, date or cycles
X
X
X
Accuracy better than 1%, 10% from end positions
X
X
X
Standard and accumulator batteries
X
X
X
436
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 437 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
mm
mm
kg
qty
X
X
X
14x18
570
1.2
1
X
X
X
14x18
570
1.2
1
X
X
X
14x18
625
1.3
1
Torque wrenches
Automatic shutoff
Overload warning
Functions: Trac, 0-reset, Units
Rectangular drive
Length
Weight
Pack.
Electronic torque wrench
"BMS" PADDY electronic torque wrenches with micro processor control. Suitable for torque measurements and
quality assurance within torque measurement.
Large alphanumeric display. Accuracy +/1% of the read value within 10-100% of the stated capacity. Can be used for right
and left action. Up to 99 preset values can be programmed via a PC or directly via a wrench with min and max limit
values or % tolerance. Audio and visual signals warn when the torque wrench approaches and reaches the set value.
Powered by 4 AA batteries. RS232 USB data transfer cable and PC-program included. Different language choices. Recalibration interval can be chosen either as a period or number of cycles. For more detailed information see the following
overview.
Art. no.
13935
(-0102)
-0201
(-0300)
-0409
BMS
No
S3010
S3020
S3050
S3100
Torque range ISO
Nm
1-10
2-20
5-50
10-100
No. of measuring ranges
ea.
10
10
10
10
No. of program operations
ea.
12
12
12
12
Units: cNm, Nm, Kgfcm, ozins, lbins, Lbft
X
X
X
X
Lit display
X
X
X
X
Audio and visual signal
X
X
X
X
Automatic zero point
X
X
X
X
RS 232 & USB communication
X
X
X
X
Calibration warning, date or cycles
X
X
X
X
Accuracy better than 1%, 10% from end positions
X
X
X
X
Standard and accumulator batteries
X
X
X
X
Windows & Excel, SPC compatible
X
X
X
X
Automatic shutoff
X
X
X
X
PLC communication ASCll or binary connection
X
X
X
X
Overload warning
X
X
X
X
Functions: Trac, 0-reset, Units
X
X
X
X
Functions: Peak Upload, Set, Blackline
X
X
X
X
Functions: Clear, data language, com
X
X
X
X
Preset min. & max. tolerance
X
X
X
X
Memory: 2094 measurement values with date and time
X
X
X
X
Direct storage
X
X
X
X
Language selection: GB, F, D, I, P, ES
X
X
X
X
0-99 presets via PC or directly
X
X
X
X
Rectangular or square drive
mm
9x12
9x12
9x12
9x12
Length
mm
410
410
410
415
Weight
kg
0.67
0.67
0.67
0.73
Pack.
qty
1
1
1
1
Art. no.
13935
(-0706)
(-0805)
-0904
(-1001)
BMS
No
S3200
S3300
S3340
S3600
Torque range ISO
Nm
20-200
34-340
34-340
60-600
No. of measuring ranges
ea.
10
10
10
10
No. of program operations
ea.
12
12
12
12
Units: cNm, Nm, Kgfcm, ozins, lbins, Lbft
X
X
X
X
Lit display
X
X
X
X
Audio and visual signal
X
X
X
X
Automatic zero point
X
X
X
X
RS 232 & USB communication
X
X
X
X
Calibration warning, date or cycles
X
X
X
X
Accuracy better than 1%, 10% from end positions
X
X
X
X
Standard and accumulator batteries
X
X
X
X
Windows & Excel, SPC compatible
X
X
X
X
Automatic shutoff
X
X
X
X
PLC communication ASCll or binary connection
X
X
X
X
Overload warning
X
X
X
X
Functions: Trac, 0-reset, Units
X
X
X
X
Functions: Peak Upload, Set, Blackline
X
X
X
X
Functions: Clear, data language, com
X
X
X
X
Preset min. & max. tolerance
X
X
X
X
Memory: 2094 measurement values with date and time
X
X
X
X
Direct storage
X
X
X
X
Language selection: GB, F, D, I, P, ES
X
X
X
X
0-99 presets via PC or directly
X
X
X
X
Rectangular or square drive
mm
14x18
14x18
14x18
14x18
Length
mm
570
570
625
1000
(-0508)
S3135
13.5-135
10
12
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
9x12
415
0.73
1
(-1100)
S3800
80-800
10
12
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
¾ square
1000
5
-0607
S3150
15-150
10
12
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
14x18
570
1.2
1
-1209
S31000
100-1000
10
12
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
¾ square
1000
437
Luna_torque.fm Page 438 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
Weight
Pack.
kg
qty
Data cable RS 232
Length
Pack.
1.2
1
13935
cm
qty
1.2
1
1.3
1
3.92
1
-2009
75
1
3-92
1
3-92
1
Electronic E-Torcl torque wrench
"Rahsol" The E-Torc is an adjustable microprocessor - controlled electronic torque wrench designed for todays high
industrial demands. With a robust, yet light format (some parts are made of carbon fibre) solutions are offered with
torque or torque and angle measurement without reference arm. A swivelling display (120°) facilitates read-off. Via
a measurement system with compensation the torque wrench is length independent within its measurement range. Limit
values and target torque can be programmed on the torque wrench, which using a visual, audio and vibration signal indicates when the set torque has been reached, ideal for use in noisy environments. Possible application areas are inspection and or quality assurance. Specific torque/angle torque wrenches are suitable as back-up tools on production lines.
The tools can store up to 2000 measurements. Data stored includes the date, time and measurement value. The torque
wrenches are supplied with software for information management on the PC platform. Two-way data communication
means all programming of torque values can be done using the PC. For further technical information - please contact us
dept. torque technology.
Wrenches type A equipped with electronic angle measurement.
Art. no.
12285
(-0100)
(-0209)
(-0308)
(-0407)
Rahsol
No
8443-010
8443-010A
8444-030
8444-030A
Torque range ISO
Nm
10-150
10-150
30-300
30-300
Torque range Imperial
lbf.ft
8-110
8-110
22-220
22-220
Rectangular drive
mm
9x12
9x12
14x18
14x18
Length
mm
470
470
555
555
Weight
kg
1.4
2.7
1.5
2.8
Pack.
qty
1
1
1
1
Accessories for torque wrenches
Ratchet head
Ratchet heads for torque wrenches
"Rahsol" Individual ratchet head for supplementing torque wrenches which lack a clutch function e.g. art. no. 1749. For
right-hand action.
Art. no.
0280
-0100
-0209
-0308
-0407
Rahsol
75400
01
02
04
Drive size
inch
¼
3/8
½
¾
Height height
mm
21
28
35
53
Outside diameter
mm
24
35
46
65
Minimum tightening angle
18
20
10
10
Pack.
qty
1
1
1
1
Angle gauge
Angle indicator for torque wrenches
"Rahsol" The torque angle indicator is used when the set torque is reached and prescribed further tightening is required. The angle indicator has an adjustable magnetic arm which is attached to a magnetic surface before tightening.
The indicator is fitted between the torque wrench drive and the screw to be tightened.
Art. no.
0315
-0109
Rahsol
No
8200-01
Square drive
inch
½
Graduation
0-360
Disc diameter
mm
80
Pack.
qty
1
Replaceable end spanners
9×12 mm drive
Plug-in tools for torque wrenches
"Rahsol" For torque wrenches with a 9×12 mm rectangular cavity and pin-locking mechanism.
Ratchet head (right-left)
5478
-3204
-3303
Rahsol
No
7412-00
7412-01
Drive sizesquare
inch
¼
3/8
Max. torque
Nm
30
135
Pack.
qty
1
1
Fixed square drive
5478
-3501
-3600
Rahsol
No
7612-00
7612-01
Drive sizesquare
inch
¼
3/8
Pack.
qty
1
1
438
Please quote the
-3402
7412-02
½
340
1
-3709
7612-02
½
1
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 439 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
Rectangular open end fitting
Rahsol 7112
Art. no.
Pack.
mm
5478
qty
10
-0101
1
11
-0200
1
12
-0309
1
13
-0408
1
14
-0507
1
15
-0606
1
16
-0705
1
17
-0804
1
18
-0903
1
19
-1000
1
21
22
Weld adapter
5478
Rahsol
Nr
Drive
mm
Pack.
qty
Rectangular ring end fitting Rectangular flared end fitting
Rahsol 7212
Rahsol 7312
Art. no.
Pack.
Art. no.
Pack.
5478
qty
5478
qty
-1109
1
-2305
1
-1208
1
-2404
1
-1307
1
-2503
1
-1406
1
-2602
1
-1505
1
-2701
1
-1604
1
-1703
1
-1802
1
-2800
1
-1901
1
-2909
1
-2008
1
-3006
1
-2107
1
-2206
1
-3105
1
-4004
7912-00
9x12
1
Torque wrenches
Size
width
5
14×18 mm drive
Plug-in tools for torque wrenches
"Rahsol" For torque wrenches with a 14×18 mm rectangular cavity and pin locking mechanism.
Ratchet head (right-left)
5481
-2003
-2052
Rahsol
No
7418-02
7418-04
Drive sizesquare
inch
½
¾
Pack.
qty
1
1
Fixed square drive
5481
-2102
-2151
Rahsol
No
7618-02
7618-04
Drive sizesquare
inch
½
¾
Pack.
qty
1
1
Size
Rectangular open end fitting
Rectangular open end fitting
Rahsol 7118
Rahsol 7218
Art. no.
Pack.
Art. no.
Pack.
mm
5481
qty
5481
qty
13
-0106
1
-1005
1
14
-0205
1
-1104
1
15
-0304
1
-1203
1
16
-0353
1
-1252
1
17
-0403
1
-1302
1
18
-0502
1
-1401
1
19
-0601
1
-1500
1
21
-0700
1
-1609
1
22
-0809
1
-1708
1
24
-0908
1
-1807
1
27
-1906
1
30
-0932
1
-1930
1
32
-0957
1
-1955
1
36
-0973
1
Weld adapter
5481
-3001
Rahsol
Nr
7918-00
Drive
mm
14x18
Pack.
qty
1
439
Luna_torque.fm Page 440 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque wrenches/-screwdrivers
For round drive 8 mm
Replaceable end spanners for round drive 8 mm
"Torqueleader" For torque wrenches13924 with drive Ø 8 mm.
Ratchet head
13926
-3008
Torqueleader
No
A28990
Drive size
inch
¼
Pack
qty
1
Fixed drive
13926
-3107
Torqueleader
No
A29070
Drive size
inch
¼
Pack
qty
1
Size
Open ended spanner
Ring spanner
Open ring spanner
width
TorqueArt. no.
Pack
TorqueArt. no.
Pack
TorqueArt. no.
Pack
leader
leader
leader
mm
No
13926
qty
No
13927
qty
No
13928
qty
3.2
049000
-0103
1
049250
(-0102)
1
4
049005
-0202
1
049255
(-0201)
1
5
049010
-0301
1
049260
(-0300)
1
5.5
049015
-0400
1
049265
(-0409)
1
6
049020
-0509
1
049270
-0508
1
7
049025
-0608
1
049275
-0607
1
8
049030
-0707
1
049280
-0706
1
049505
(-0101)
1
9
049035
-0806
1
049285
(-0805)
1
049515
10
049040
-0905
1
049290
-0904
1
049520
(-0200)
1
11
049045
-1002
1
049295
(-1001)
1
049530
(-0309)
1
12
049050
-1101
1
049305
049530
13
049055
-1200
1
049310
-1100
1
049555
(-0408)
1
14
049060
-1309
1
049315
(-1209)
1
049565
(-0507)
1
15
049065
-1408
1
049315
(-1308)
1
16
049070
-1507
1
049330
(-1407)
1
17
049075
-1606
1
049335
18
049080
-1705
1
049340
(-1506)
1
19
049085
-1804
1
049360
(-1605)
1
(-0606)
1
20
049090
(-1903)
1
(-1704)
1
21
049095
(-2000)
1
22
049100
(-2109)
1
23
049105
(-2208)
1
24
049110
(-2307)
1
(-1803)
1
(-0705)
1
25
049115
(-2406)
1
Weld adapter
13926
-3206
Torqueleader
No
A29012
Pack
qty
1
For round drive 16 mm
Insert tools for torque wrenches
Size
width
mm
7
8
9
10
11
12
13
14
15
16
17
18
440
For torque wrenches with a 16 mm spigot end and pin locking mechanism.
Ratchet head
12234
-6208
-6307
Drive size
inch
3/8
½
Pack.
qty
1
1
Fixed square drive
12234
-5903
-6000
Drive size
inch
3/8
½
Pack.
qty
1
1
Weld adapter for ring grip
12234
-6109
Pack.
qty
1
Open end fitting
Ring end fitting
Flared end fitting
Art. no.
Max.
Pack.
Art. no.
Max.
Pack.
Art. no.
Max.
Pack.
torque
torque
torque
12234
Nm
qty
12234
Nm
qty
12234
Nm
qty
-0102
9
1
-2108
25
1
-4005
4
1
-0201
13
1
-2207
35
1
-4104
7
1
-0300
19
1
-2306
45
1
-4203
9
1
-0409
25
1
-2405
52
1
-4302
12
1
-0508
32
1
-2604
73
1
-4401
16
1
-0607
41
1
-2703
89
1
-4500
25
1
-0706
51
1
-2802
107
1
-4609
28
1
-0805
63
1
-2900
128
1
-4708
31
1
-0904
77
1
-3007
150
1
-4807
38
1
-1001
92
1
-3106
175
1
-4906
46
1
-1100
107
1
-3205
201
1
-5002
53
1
-1209
128
1
-3304
230
1
-5101
65
1
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 441 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
mm
19
20
21
22
23
24
27
30
32
Open end fitting
Max.
Pack.
torque
12234
Nm
qty
-1308
149
1
-1407
172
1
-1506
198
1
-1605
225
1
-1704
255
1
-1803
330
1
-1902
330
1
-2009
330
1
Art. no.
Ring end fitting
Max.
torque
12234
Nm
-3403
261
1
-3502
294
1
-3601
330
1
-3700
330
1
-3809
330
1
-3908
330
1
Art. no.
Pack.
qty
Flared end fitting
Max.
Pack.
torque
12234
Nm
qty
-5200
74
1
-5309
86
1
-5408
100
1
-5507
112
1
-5606
123
1
-5705
143
1
-5804
150
1
Art. no.
Torque wrenches
Size
width
5
For round drive 22 mm
Plug-in tools for torque wrenches
For torque wrenches with a 22 mm spigot end and pin loocking mechanism.
Fixed square drive
12235
-1703
Drive size
inch
¾
Pack.
qty
1
Ratchet head
12235
-1802
Drive size
inch
¾
Pack.
qty
1
Size
Open end fitting
Ring end fitting
width
Art. no.
Max.
Pack.
Art. no.
Max.
torque
torque
mm
12235
Nm
qty
12235
Nm
22
-0101
225
1
-0903
225
1
24
-0200
287
1
-1000
287
1
27
-0309
399
1
-1109
399
1
30
-0408
536
1
-1208
536
1
32
-0507
643
1
-1307
643
1
36
-0606
894
1
-1406
894
1
41
-0705
1154
1
-1505
1154
1
46
-0804
1453
1
-1604
1453
1
Pack.
qty
Torque screwdrivers
Torque screwdriver with scale, slipping mechanism
"Torqueleader" Type Ergo-Quickset. An adjustable torque screwdriver with slipping mechanism. Easy to read
adjustment with lock to ensure the correct torque. The tool satisfies and exceeds the latest ISO 6789 standard and is
supplied with a calibration certificate. All torque wrenches are ESD-approved. The larger models are supplied with
a T-handle for easy tightening of higher torque.
Art. no.
12138
-0109
-0208
-0307
-0406
Torqueleader
No
060700
060100
060300
060500
Torque range ISO
cNm
5-40
20-120
Torque range ISO
Nm
1-6
4-9
Length
mm
159
183
196
196
Drive female hex
inch
¼
¼
¼
¼
Weight
g
124
230
335
335
T-handle
yes
yes
ESD-approved
yes
yes
yes
yes
Pack.
qty
1
1
1
1
Torque screwdrivers without scale, slipping mechanism
"Torqueleader" Torque screwdrivers without scale, slipping mechanism. Presettable for easy assembly/
production. Screwdriver set using a measurement instrument. Slipping mechanism ensures the correct torque on the
joint. Right and left action. The tools satisfy and exceed the ISO 6789 standard and are supplied with a calibration certificate.
¹) Available in ESD-approved design, orig. no. 015923.
Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12134
-0103
-0202
-0301
-0806
-1101
Torqueleader
No
015000
015080
015200
015620
015920
Torque range ISO
cNm
2-22
0.5-22
2-135
6-406
Torque range ISO
Nm
1-13.6
Length
mm
76
104
111
127
137
Drive female hex
inch
¼
¼
¼
¼
¼
Weight
g
50
72
210
280
325
T-handle
ESD-approved
yes
yes
yes
yes
yes
Pack
qty
1
1
1
1
1
441
Luna_torque.fm Page 442 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
Torque screwdriver without scale, slipping mechanism for "Clean Room" environments
Torque wrenches
5
"Torqueleader" Torque screwdrivers without scale, slipping mechanism for "Clean Room" environments. When the environment requires "Clean Room" tools, we offer a series of torque screwdrivers that meet
the demands according to Clean Room Class 100. The handles are made of anodised aluminium with FTFE Coating. All
steel components are either made of high grade stainless steel or coated with a protective film to prevent corrosion.
Seals and lubricants (special filtered) are adapted for this type of activity. Presettable torque screwdrivers for easy assembly/production. Screwdriver set using a measurement instrument. Slipping mechanism ensures the correct torque
on the joint. Right and left action. The tool satisfies and exceeds the latest ISO 6789 standard and is supplied with a
calibration certificate. All models are ESD-approved.
Luna will preset the required torque on request, see services - torque wrenches.
Art. no
12148
(-0107)
(-0206)
-0404
Torqueleader
No
015089
015209
015609
Torque range ISO
cNm
2-22
11-135
16-406
ESD-approved
yes
yes
yes
Pack
qty
1
1
1
Slipping
Torque screwdriver
"Teng Tools" For precision tightening of screws and bolts. For both right and left hand action. With ¼" square-drive
and adapter for hex ¼" for bits. Suitable for e.g. fine mechanics, electronics, etc.
Art. no.
12206
-0106
Teng Tools
No
1492SD
Torque range ISO
Nm
1-5
Drive for bits
inch
hex ¼
Pack.
qty
1
Torque screwdriver ESD
"Wera" ESD designFor precision tightening of screws and bolts. For both right and left hand action. Ergonomically
designed handle type Kraftform. Bit holder with quick release chuck. The hexagonal opening can be enlarged via a collet,
which facilitates changing bits. Recessed magnet that holds the bits as well as the screw. Suitable for e.g. fine mechanics,
electronics, etc.
Art. no.
10452
-0101
-0200
Wera
No
7420 A ESD
7421 A ESD
Torque range ISO
cNm
20-120
Torque range ISO
Nm
1-6
Graduation
1.0 cNm
0.1 Nm
Drivehex
inch
¼
¼
Total length
mm
180
190
Pack.
qty
1
1
Torque screwdriver set
"Teng Tools" The set includes one torque screwdriver, ¼" extension bar 100 mm, bit holder and 36 different bits.
Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12250
-0101
Teng Tools
No
TTSD39
Torque screwdriver ¼"-hex for
Nm
1-5
Extension bar ¼"- square
mm
100
Bits for slotted heads
mm
0.5x3 0.6x4.5 0.8x5.5 1.2x6.5
Bits for Phillips heads
No
0123
Bits for Pozidriv-heads
No
0123
Bits for TX-heads
TX
8 9 10 15 2025 27 30 40
Bits for TX-heads
TPX
10 15 20 25 30
Bits for Robertson heads
No
0123
Bits for Grabber heads PH
No
2 (2)
Bits for hex holes
mm
23456
Case size LxWxH
mm
265x142x50
Weight
kg
0.66
Pack.
sts
1
Special torque screwdrivers
Torque screwdriver
Art. no.
Wera-no
442
"Wera" Torque screwdriver especially designed for indexable inserts.
All indexable inserts should be tightened to the right torque to minimise the risk of loosening or being tightened too
tight and not be loosened reliably when changing the cutting tip. Weras torque screwdrivers have a fixed torque for
each size, no loose or replaceable parts that can be mixed up and jeopardize safety for people as well as the cutting tools.
Each screwdriver is well marked with the size and torque. When the right torque is reached the screwdriver "disengages" with a distinctive "click", no risk of overloading the screw. When undoing there is no torque limitation. Heavy-duty
Kraftform handle made of two different materials - solid plastic with rubber insert for excellent grip.
Brochure on request 12111-9994.
12111
-0100
-0209
-0308
-0407
-0506
-0605
300
TX 6
TX 7
TX 8
TX 9
TX 10
TX 15
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 443 Monday, March 30, 2009 11:45 AM
Torque wrenches/-screwdrivers
Nm
mm
mm
qty
0.6
65
105
1
0.9
65
105
1
1.2
65
105
1
1.4
65
105
1
2.0
65
105
1
3.0
65
105
1
Torque screwdriver
"Wera" Torque screwdriver especially designed for indexable inserts.
All indexable inserts should be tightened to the right torque to minimise the risk of loosening or being tightened too
tight and not be loosened reliably when changing the cutting tip. Weras torque screwdrivers have a fixed torque for
each size, no loose or replaceable parts that can be mixed up and jeopardize safety for people as well as the cutting tools.
Each screwdriver is well marked with the size and torque. When the right torque is reached the screwdriver "disengages" with a distinctive "click", no risk of overloading the screw. When undoing there is no torque limitation. Heavy-duty
Kraftform handle made of two different materials - solid plastic with rubber insert for excellent grip. Brochure on request 12111-9994.
Art. no.
12112
-0109
-0208
-0307
-0406
-0505
Wera-no
300
6 IP
7 IP
8 IP
9 IP
10 IP
Torque range ISO
Nm
0.6
0.9
1.2
1.4
2.0
Blade length
mm
65
65
65
65
65
Handle length
mm
105
105
105
105
105
Pack.
qty
1
1
1
1
1
Torque wrenches
Torque range ISO
Blade length
Handle length
Pack.
5
-0604
15 IP
3.0
65
105
1
Special torque screwdriver
"Wera" With angled handle. Torque screwdriver especially designed for indexable inserts.
All indexable inserts should be tightened to the right torque to minimise the risk of loosening or being tightened too
tight and not be loosened reliably when changing the cutting tip. Weras torque screwdrivers have a fixed torque for
each size, no loose or replaceable parts that can be mixed up and jeopardize safety for people as well as the cutting tools.
Each screwdriver is well marked with the size and torque. When the right torque is reached the screwdriver "disengages" with a distinctive "click", no risk of overloading the screw. When undoing there is no torque limitation. Heavy-duty
Kraftform handle made of two different materials - solid plastic with rubber insert for excellent grip.
Art. no.
13258
-0101
Wera
No
300 TX
Torx slotted heads
No
TX 20
Torque ISO
Nm
5.0
Blade length
mm
65
Total length
mm
160
Pack
qty
1
Special torque screwdriver
"Wera" With angled handle. Torque screwdriver especially designed for indexable inserts.
All indexable inserts should be tightened to the right torque to minimise the risk of loosening or being tightened too
tight and not be loosened reliably when changing the cutting tip. Weras torque screwdrivers have a fixed torque for
each size, no loose or replaceable parts that can be mixed up and jeopardize safety for people as well as the cutting tools.
Each screwdriver is well marked with the size and torque. When the right torque is reached the screwdriver "disengages" with a distinctive "click", no risk of overloading the screw. When undoing there is no torque limitation. Heavy-duty
Kraftform handle made of two different materials - solid plastic with rubber insert for excellent grip.
Art. no.
13263
-0104
Wera
No
300 IP/5.0 Nm
Slotted head
No
20 IP
Torque ISO
Nm
5.0
Blade length
mm
65
Total length
mm
160
Pack
qty
1
Special torque screwdriver
"Wera" Rapidaptor. With quick chuck. Adjustable torque settings. Used with ¼" hex bits. Accuracy ± 6%. Twocomponent Kraftform handle. No 074702 with pistol grip.
Art. no.
13257
-0102
-0201
-0300
Wera
No
074700
074701
074702
Shank hex
inch
¼
¼
¼
Adjustable torque range ISO
Nm
0.3-1.2
1.2-3.0
3.0-6.0
Graduation
Nm
0.05
0.05
0.05
Total length
mm
155
155
155
Pack.
qty
1
1
1
443
Luna_torque.fm Page 444 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque multipliers
Control torque screwdrivers
Mechanical
Control torque screwdrivers
"Torqueleader" The TT-series with guide indicator function. Scale both right and left movement. Manufactured of
aluminium for a low weight. Grip friendly handle. The tool satisfies and exceeds the ISO 6789 standard and is supplied
with a calibration certificate. ESD-approved tool.
Art. no.
12137
(-0506)
(-0605)
-0704
-0803
Torqueleader
No
017400
017500
017600
017700
Torque range ISO
cNm
10-50
20-100
50-250
100-500
Torque range Imperial
lbf.ft
4-20
8-40
Torque range Imperial
ozf.in
14-70
28-140
Length
mm
178
178
250
250
Drive female hex
inch
¼
¼
¼
¼
T-handle
yes
yes
ESD-approved
yes
yes
yes
yes
Weight
kg
0.19
0.19
0.47
0.47
Pack.
qty
1
1
1
1
Torque multipliers
Torque multipliers
Torque multipliers
"Teng Tools" For dismantling stubborn bolts and nuts. When tightening the torque is increased 3 times on the output
drive. Used together with automotive sockets.
Art. no.
12207
-0105
-0204
Teng Tools
No
MP1400
MP2700
Max. tightening torque
Nm
1400
2700
Max. tightening torque
lbs-ft
1000
2000
Incoming tightening torqueis increased a number of times
3
3
Input square drive
inch
½
¾
Output drive
inch
¾
1
Weight
kg
2.28
4.78
Pack.
qty
1
1
Torque set (torque multiplier + torque wrench)
"Teng Tools" Set containing one torque multiplier and one torque wrench. The torque multipliers input tightening
torque is trebled on the output drive. The torque wrench has a ½" square-drive and torque range 40-210 Nm.
Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12822
-0100
Teng Tools
No
TTXMP12
Torque multiplier:Max. tightening torque
Nm
1400
Input - Output drive
inch
½ - 3/4
Torque wrench:Torque range ISO
Nm
40-210
Drive size
inch
½
Insert size LxWxH
mm
560x110x60
Weight
kg
4.0
Pack.
set
1
Torque multiplier
"Norbar" Type Highwayman HT-3. Robust, very efficient torque multiplier. True torque multiplication 5:1
makes it easy to set a torque wrench to reach the correct final torque. Divide the torque to be reached with the multiplication the multiplier offers and set the right value on the torque wrench. The multiplier is supplied in a robust plastic
box, with carrying handle for easy transport, contains both the counterhold arm, counterhold base and transducer.
12185-0101 also contains an extra square drive. The accuracy of the multiplier is ±4% or better.
¹) Weight without and with standard counterhold.
²) Suitable torque wrenches only reflect a recommendation to utilise the multipliers max. torque.
Art. no.
12185 -0101
-0200
Norbar
No
17220
17221
Torque range
Nm
1300
2700
Torque range Imperial
lbf.ft
960
2000
Input drive
½" square hole/32 mm male hexagonal
¾" square hole/36 mm male hexagonal
Output drive
¾" square drive
1" square drive
True multiplication
5:1
5:1
Height
mm
126
128
Diameter
mm
108
108
Suitable torque wrench ²)
12125-0609, PRO 300 Nm
12168-0102, PRO 550 Nm
Alternative torque wrench
12122-0206, IND 3AR
444
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 445 Monday, March 30, 2009 11:45 AM
Torque multipliers
kg
kg
qty
3.8/5.1
7.1
1
3.8/5.1
7.1
1
Torque wrenches
Weight transducer ¹)
Weight set incl. accessories
Pack.
Torque multiplier with spline mounted counterhold
"Norbar" Robust, very efficient torque multiplier and spline mounted counterhold. True torque multiplication makes it easy to set a torque wrench to reach the correct final torque. Divide the torque to be reached with the
multiplication the multiplier offers and set the right value on the torque wrench. When utilising the spline when locking
the counterhold arm/base you can use the torque multiplier better and in doing so, reach higher torque when using
smaller transducers. All transducers have replaceable output square drives, which in addition, are designed to be the
weakest link and reduce the risk of the gears breaking. The multipliers are also available with reverse lock (AWUR)
which facilitates tightening with greater multiplication than 5:1. The accuracy is ±4% or better.
¹) Weight without and with standard counterhold.
²) Suitable torque wrenches only reflect a recommendation to utilise the multipliers max. torque.
Art. no.
12186
(-0100)
(-0209)
(-0506)
(-0803)
(-0902)
Norbar
No
18014
18015
18036
18006
18008
Torque range ISO
Nm
1000
1500
2000
3000
6000
Torque range Imperial
lbf.ft
740
1100
1450
2200
4400
Input drive
inch
½
½
½
½
½
Output drive
inch
¾
1
1
1
1½
True multiplication
5:1
5:1
25:1
25:1
25:1
Reverse lock (AWUR)
yes
yes
yes
Weight transducer ¹)
kg
2.4/4.1
2.4/4.1
2.8/4.1
5/7
10.6/14.6
Height
mm
144
144
166.3
224
271
Diameter
mm
72
72
72
108
119
Suitable torque wrench ²)
12125-0500 12125-0609 12125-0401 12125-0500 12125-0609
Pack.
qty
1
1
1
1
1
5
(-1108)
18012
6000
4400
½
1½
125:1
yes
12.1/16.1
301
119
12125-0203
1
Torque multiplier with bolt mounted counterhold
"Norbar" Robust, very efficient torque multiplier for high torque and with bolt mounted counterhold. True
torque multiplication makes it easy to set a torque wrench to reach the correct final torque. Divide the torque to
be reached with the multiplication the multiplier offers and set the right value on the torque wrench. All transducers
have replaceable square drives, which in addition, are designed to be the weakest link and reduce the risk of the gears
breaking. The multipliers are also available with reverse lock (AWUR) which facilitates tightening with greater multiplication than 5:1. The accuracy of multipliers is ±4% or better.
¹) Weight without and with standard counterhold.
²) Suitable torque wrenches only reflect a recommendation to utilise the multipliers max. torque.
Art. no.
12184
(-1100)
(-1209)
(-1308)
Norbar
No
16065
16068
16070
Torque range ISO
Nm
6000
6000
9500
Torque range Imperial lbf.ft
4500
4500
7000
Input drive
inch
½
½
¾
Output drive
inch
1½
1½
1½
True multiplication
25:1
125:1
25:1
Reverse lock (AWUR)
yes
yes
yes
Weight transducer ¹)
kg
10.7/17.0
12.2/18.5
17.4/25.7
Height
mm
225.5
239.5
209
Diameter
mm
144
144
184
Suitable torque wrench mm
12125-0609 12125-0203
12125-0807
Pack.
qty
1
1
1
Art. no.
12184
(-1407)
(-1506)
(-1605)
(-1704)
Norbar
No
16071
16048
16049
16053
Torque range ISO
Nm
9500
20000
20000
47500
Torque range Imperial lbf.ft
7000
14700
14700
35000
Input drive
inch
½
¾
½
¾
Output drive
inch
1½
2½
2½
2½/3½
True multiplication
125:1
25:1
125:1
125:1
Reverse lock (AWUR)
yes
yes
yes
yes
Weight transducer ¹)
kg
18.9/27.2
30.6/43.9
32.1/45.4
95.2/102.1
Height
mm
234
329.5
307
366
Diameter
mm
184
212
212
315
12125-0401
12168-030012122-0602
12125-0500
Suitable torque wrench mm
12125-0807
Pack.
qty
1
1
1
1
445
Luna_torque.fm Page 446 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
High torque wrenches (above 500 Nm)
High torque wrenches (above 500 Nm)
High torque wrenches (above 500 Nm)
Pneumatic wrenches
Impact wrenches reversible
"Cooper-Cleco" Series 64. Stall impact wrenches in reversible design. Equipped with aluminium counterhold arm.
Powerful machines ideal for high torque in industry, production etc. Torque adjusted via the air pressure. Well-balanced
and ergonomic design.
Art. no.
12038
(-0100)
(-0209)
(-0308)
Cooper-Cleo
No
64TTS34D4 64TTS44D4 64TTS55D4
Max. tightening torque
Nm
34
44
55
Bolt capacity
Mm
M8
M8
M10
Speed
rpm
725
570
445
Socket drivesquare
inch
½
½
½
Noise level (according to DIN 45635) dB (A)
75
75
75
Rec. hose dimension
inch
½
½
½
Connection thread
NPT
¼
¼
¼
Air consumption*
l/min
500
500
500
Air consumption*
l/s
8.33
8.33
8.33
Length
mm
291
291
291
Weight
kg
2.8
2.8
2.8
Pack.
qty
1
1
1
Art. no.
12038
(-0407)
(-0506)
(-0605)
(-0704)
Cooper-Cleo
No
64TTS75D4 64TTS90D4 64TTS110D4 64TTS125D4
Max. tightening torque
Nm
75
90
110
125
Bolt capacity
Mm
M12
M12
M12
M12
Speed
rpm
340
270
225
200
Socket drivesquare
inch
½
½
½
½
Noise level (according to DIN 45635) dB (A)
75
75
75
75
Rec. hose dimension
inch
½
½
½
½
Connection thread
NPT
¼
¼
¼
¼
Air consumption*
l/min
500
500
500
500
Air consumption*
l/s
8.33
8.33
8.33
8.33
Length
mm
291
291
291
291
Weight
kg
2.8
2.8
2.8
2.8
Pack.
qty
1
1
1
1
High torque wrench, series PT-52
"Norbar" The PTM-52-series is developed with regard to ergonomic working methods. Low weight combined with
high speed and stall (not impact) drive gives a tool that facilitates work with higher torque. The torque is easily set
by adjusting the air pressure according to the supplied graph (torque/bar). On models with internal regulators a suitable
measurement instruments is used for the torque setting. Replaceable square drives for easy and cost efficient service.
Sound level less than 85 db(A) when loaded. All models feature gradual start to make work easier. A large range of accessories such as nose extensions and integrated torque transducers are available for greater precision.
¹) With an internal regulator you can preset the torque on the tool and thereby avoid incorrect torque. The torque is
set using a suitable measurement instrument.
PTM-52-1000 Nm with torque range 200-1000 Nm and 125 rpm in general the same table data as PTM-52/600 Nm.
Series PTM-52/600 Nm
12183
(-0202)
(-0103)
(-0293)
(-0301)
Norbar
No
18039.F06
18039.B06
18058.F06
18058.B06
Torque range ISO
Nm
120-600
120-600
120-600
120-600
Torque range Imperial
lbf.ft
88-442
88-442
88-442
88-442
Direction
right action
right/left action
right action
right/left action
Output drive
inch
¾
¾
¾
¾
Internal regulator ¹)
yes
yes
Sound level (EN ISO 15744)
dB (A)
83
83
83
83
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
<2.5
Speed
rpm
200
200
200
200
Weight without counterhold
kg
3.8
4.0
4.0
4.2
Length
mm
280
320
345
385
Width
mm
55
55
55
55
Diameter gear
mm
52
52
52
52
Air connection, thread
BSP
½
½
½
½
Air consumption
l/sec
19
19
19
19
Pack
qty
1
1
1
1
Series PTM52/1000 Nm
12183
(-1002)
-0905
(-0913)
-1101
Norbar
No
18040F06
18040B06
18042B06
18042B06
Torque range ISO
Nm
200-1000
200-1000
200-1000
200-1000
Torque range Imperial
lbf.ft
147-738
147-738
147-738
147-738
Sound level (EN ISO 15744)
dB (A)
83
83
83
83
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
<2.5
446
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 447 Monday, March 30, 2009 11:45 AM
High torque wrenches (above 500 Nm)
kg
mm
rpm
qty
3.8
280
125
1
4.0
32
125
1
4.0
345
125
1
High torque wrench, series PTM-52
"Norbar" The PTM-52-series is developed with regard to ergonomic working methods. Low weight combined with
high speed and stall (not impact) drive gives a tool that facilitates work with higher torque. The torque is easily set
by adjusting the air pressure according to the supplied graph (torque/bar). On models with internal regulators a suitable
measurement instruments is used for the torque setting. Replaceable square drives for easy and cost efficient service.
Sound level less than 85 db(A) when loaded. All models feature gradual start to make work easier. A large range of accessories such as nose extensions and integrated torque transducers are available for greater precision.
¹) With an internal regulator you can preset the torque on the tool and thereby avoid incorrect torque. The torque is
set using a suitable measurement instrument.
PTM-52-800 Nm with torque range 160-800 Nm and 175 rpm in general the same table data as PT-52.
Series PTM-52/500 Nm
15195
-0102
-0201
-0300
Norbar
No
18100.F06
18100.B06
18110.F06
Torque range ISO
Nm
100-500
100-500
100-500
Torque range Imperial
lbf.ft
74-370
74-370
74-370
Direction
right action
right/left action
right/left action
Output drive
inch
¾
¾
¾
Internal regulator ¹)
yes
Sound level (EN ISO 15744)
dB (A)
83
83
83
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
Speed
rpm
245
245
245
Weight without counterhold
kg
3.8
4.0
4.2
Length
mm
284
333
397
Width
mm
55
55
55
Diameter gear
mm
52
52
52
Air connection, thread
BSP
½
½
½
Air consumption
l/sec
19
19
19
Pack.
Series PTM52/800 Nm
15195
-0409
-0508
-0607
Norbar
No
18101F06
18101B06
18101B06
Torque range ISO
Nm
160-800
160-800
160-800
Internal regulator ¹)
yes
Torque range Imperial
lbf.ft
118-590
118-590
118-590
Sound level (EN ISO 15744)
dB (A)
83
83
83
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
Weight without counterhold
kg
3.8
4.0
4.2
Length
mm
284
333
397
Speed
rpm
175
175
175
Pack.
-
4.2
385
125
1
Torque wrenches
Weight without counterhold
Length
Speed
Pack
5
High torque wrench, series PT-72
"Norbar" Series PT-72 has been developed to promote ergonomic working methods. Low weight combined with
stall (not impact) drive gives a tool that facilitates work with higher torque. The torque is easily set by adjusting the
air pressure according to the supplied graph (torque/bar). Replaceable square drives for easy and cost efficient service.
All models feature gradual start to make work easier. A large range of accessories such as nose extensions and integrated torque transducers are available for highest precision.
Standard machine
12181
(-0402)
-0709
-0907
(-1103)
Norbar
No
18026
18021
18033
18038
Torque range ISO
Nm
190-1000
300-1500
400-2000
900-4500
Torque range Imperial
lbf.ft
140-740
220-1100
300-1450
660-3300
Right/left action
yes
yes
yes
yes
Output drive
inch
1
1
1
1
Sound level (EN ISO 15744)
dB (A)
81
81
81
81
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
<2.5
Speed, clearance
rpm
15
9
6
4
Weight without counterhold
kg
6.4
6.4
6.4
13.7
Length
mm
301
301
301
390
Width/diameter
mm
55
55
55
140
Air connection, thread
BSP
½
½
½
½
Air consumption
l/sec
11
11
11
11
Pack
qty
1
1
1
1
Ditto with automatic 2-speed gear
12181
(-0600)
(-0808)
(-1004)
(-1202)
Norbar
No
18026.aut
18021.aut
18033.aut
18038.aut
Sound level (EN ISO 15744)
dB (A)
81
81
81
81
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
<2.5
Speed, clearance
rpm
75
45
30
13.5
Weight without counterhold
kg
8.7
8.7
8.7
8.7
Length
mm
373
373
373
373
Pack
qty
1
1
1
1
447
Luna_torque.fm Page 448 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
High torque wrenches (above 500 Nm)
High torque wrench, series PTM-72
"Norbar" The PTM-72 is developed with regard to ergonomic working methods. Low weight combined with high
speed and stall (not impact) drive gives a tool that facilitates work with higher torque. The torque is easily set by
adjusting the air pressure according to the supplied graph (torque/bar). Replaceable square drives for easy and cost efficient service. On models with internal regulators a suitable measurement instruments is used for the torque setting.
Sound level less than 85 db(A) when loaded. All models feature gradual start to make work easier. A large range of accessories such as nose extensions and integrated torque transducers are available for greater precision.
¹) With an internal regulator you can preset the torque on the tool and thereby avoid incorrect torque. The torque is
set using a suitable measurement instrument.
PTM-72-1000 Nm and 140 rpm.
Standard machine
15196
-0101
-0200
-0309
Norbar
No
18102.B06
18103.B08
18104.B04
Torque range ISO
Nm
200-1000
270-1350
400-2000
Torque range Imperial
lbf.ft
147-738
200-1000
295-1475
Right/left action
yes
yes
yes
Output drive
inch
1
1
1
Sound level (EN ISO 15744)
dB (A)
81
81
81
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
Speed, clearance
rpm
140
105
70
Weight without counterhold
kg
6.1
6.1
6.5
Length
mm
365
365
398
Width/diameter
mm
55
55
55
Air connection, thread
BSP
½
½
½
Air consumption
l/sec
11
11
11
Pack.
Internal regulator
15196
-0408
-0507
-0606
Norbar
No
18112.B06
18113.B08
18114.B08
Internal regulator ¹)
yes
yes
yes
Sound level (EN ISO 15744)
dB (A)
81
81
81
Vibration (ISO 8662)
m/s²
<2.5
<2.5
<2.5
Weight without counterhold
kg
7.4
7.4
7.4
Length
mm
421.5
421.5
453
Pack.
-
High torque wrench
"Norbar" PT-straight series has a stall (not impact) drive suitable for rally high torque (100000 Nm). The
torque is easily set by adjusting the air pressure according to the supplied graph (torque/bar). Replaceable square drives
for easy and cost efficient service. Sound level less than 81 db(A) when loaded. All models feature gradual start to make
work easier.
A large range of accessories such as nose extensions and integrated torque transducers are available for greater precision.
Art. no., 1-speed machine
12179 (-1305)
(-1602)
(-2204)
Norbar
No
16066
16072
16046
Torque range ISO
Nm
1762-6000
2710-9500
4400-20000
Torque range Imperial
lbf.ft
1300-4500
2000-7000
3250-14700
Right/left action
yes
yes
yes
Output drive
inch
1½
1½
2½
Speed
rpm
2.5
1.8
1.2
Weight without counterhold
kg
19.7
24.4
38.6
Length
mm
526
521
547
Width/diameter
mm
144
184
212
Air consumption
l/sek
19
19
19
Connection thread
BSP
½
½
½
Pack.
qty
1
1
1
Ditto 2-speed machine
12179 (-1404)
(-1701)
(-2402)
Norbar
No
16066.aut
16072.aut
16046.mts
Speed
rpm
12.5/2.5
9/1.8
6/1.2
Weight without counterhold
kg
23.2
27.9
42.1
Length
mm
543
538
633
Pack.
qty
1
1
1
Nose extension for high torque wrenches
"Norbar" There are a number of accessories for Norbar torque converters and high torque wrenches. The nose extension can facilitate access and the working method. The extension also acts as a counterhold. Easily fitted on existing
models.
Art. no.
12298
(-0105)
(-0204)
Norbar
No
18594.006
18349.006
Fits converter 12186
-0100, -0209, -0506
-0100, -0209, -0506
Fits wrench
12183
PT-52 all models
all excl. -1103, -1202
Input drive
inch
¾
tool
Length
mm
150
178
Weight
kg
3.1
3.1
Pack.
qty
1
1
448
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 449 Monday, March 30, 2009 11:45 AM
High torque wrenches (above 500 Nm)
12298
No
12186
12183
inch
mm
kg
qty
18349.009
-0100, -0209, -0506
all excl. -1103, -1203
tool
258
3.8
-
18349.018
-0100, -0209, -0506
all excl. -1103, -1203
tool
477
6.1
-
Filter regulator
"Norbar" This filter regulator is adapted for all Norbar high torque wrenches. With the easy-to-read and stabile pressure gauge it is easy to set the right air pressure to achieve the right torque on the wrenches. Supplied with 3 metres
of reinforced hose adapted for PT-wrenches.
Art. no.
12308
-0103
Norbar
No
16036
Connection thread
BSP
½
Pack.
qty
1
Torque wrenches
Art. no.
Norbar
Fits converter
Fits wrench
Input drive
Length
Weight
Pack.
5
Hydraulic wrenches
Hydraulic impact wrench
"Christie" Our hydraulic impact wrenches are robust and ideal for industrial use. Double acting function ensures the
correct return and full stroke length during each tightening action. The tools can be offered up to above 100.000 Nm.
Due to the robust design the hydraulic body can also be used as a counterhold when space is confined. The hydraulic
impact wrenches are available in 2 basic designs: CR with square drive and CCR with female, hexagon for direct fit on
nuts or bolts.
NOTE: The required A/F size in millimetres must be stated when ordering CCR tools.
Art. no.
12307
(-0104)
(-0203)
(-0302)
(-0401)
(-0500)
(-0609)
Christie
No
CR 1
CR 1.5
CR 3
CR 5
CR 7
CR 11
Torque max ISO
Nm
1360
2040
4488
7888
10060
14960
Torque max Imperial
lbf.ft
1000
1500
3300
5800
7400
11000
Dimension A
mm
42
50
52
65
65
83
Dimension B
mm
115
140
175
180
207
222
Dimension C
mm
28
30
40
45
58
66
Dimension D
mm
5
65
90
95
112
130
Dimension E
mm
70
90
92
120
120
138
Size R
mm
24
25
35
37
45
45
Square drive
inch
¾/1
¾/1
1
1½
1½
1½
Weight
kg
4
6
8
13
16
22
Pack.
qty
1
1
1
1
1
1
Art. no.
12307
(-0708)
(-0807)
(-0906)
(-1003)
(-1102)
Christie
No
CR 15
CR 20
CR 30
CR 50
CR 80
Torque max ISO
Nm
20040
28560
43520
68000
108800
Torque max Imperial
lbf.ft
15000
21000
32000
50000
80000
Dimension A
mm
95
97
115
145
172
Dimension B
mm
230
265
290
320
416
Dimension C
mm
70
74
80
90
100
Dimension D
mm
140
157
175
200
258
Dimension E
mm
172
175
185
230
272
Size R
mm
52
62
69
85
100
Square drive
inch
2½
2½
2½
2½ / 3½
2½ / 3½
Weight
kg
31
44
54
103
178
Pack.
qty
1
1
1
1
1
Art. no.
12307
(-2001)
(-2100)
(-2209)
(-2308)
(-2407)
(-2506)
Christie
No
CCR 1
CCR 1.5
CCR 3
CCR 5
CCR 7
CCR 11
Torque max ISO
Nm
1360
2040
4488
7888
10060
14960
Torque max Imperial lbf.ft
1000
1500
3300
5800
7400
11000
Dimension A
mm
38
41
52
58
64
82
Dimension B
mm
11
12
15
16
18
20
Maximal size A/F
mm
41
55
65
75
80
120
Pack.
qty
1
1
1
1
1
1
Art. no.
12307
(-2605)
(-2704)
(-2803)
(-2902)
(-3009)
Christie
No
CCR 15
CCR 20
CCR 30
CCR 50
CCR 80
Torque max ISO
Nm
20400
28560
43520
68000
108800
Torque max Imperial lbf.ft
15000
21000
32000
50000
80000
Dimension A
mm
96
100
120
147
180
Dimension B
mm
22
25
30
38
48
Maximal size A/F
mm
120
130
155
205
250
Pack.
qty
1
1
1
1
1
449
Luna_torque.fm Page 450 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
High torque wrenches (above 500 Nm)
Hydraulic clamp
Hydraulic clamp
"Tentec" A large problem when tightening joints is friction. When using a bolt tensioner you avoid the problem of
friction and work directly with clamping force. When you use one or more tensioners at the same time you can guarantee a correctly tightened joint.
Topside Bolt tensioner is a flexible and cost effective system where the tool is mounted on top of the bolt using a
tensioning insert that tensions the bolt to the required pretension via hydraulic pressure.
These have a modular design and can be used with several different inserts. Each load cell is self-sealing and seal adjustment is not necessary. The belt tensioner is secured when the stroke level is exceeded.
Art. no.
12786
(-0104)
Tentec
No
1CTST:0016
Thread
M 16
Pack.
qty
1
Tool Tentec
No No
1
1
1CTST:0750
1
1
1CTST:0875
1
1CTST:1000
1
1CTST:1125
2
2
2CTST:1250
2
2CTST:1375
2
2CTST:1500
3
3CTST:1500
3
3CTST:1625
3
3CTST:1750
3
3CTST:1875
3
3CTST:2000
4
4CTST:1875
4
4CTST:2000
4
4CTST:2250
4
4
4CTST:2500
5
5CTST:2500
5
5
5CTST:2750
5
5CTST:3000
6
6CTST:3000
6
6
6CTST:3250
6
6CTST:3500
6
6CTST:3750
6
6CTST:4000
Max. pressure
Thread
inch
mm
16
¾
18
20
7/8
22
1
24
11/8
27
30
1¼
33
13/8
36
1½
39
1½
39
15/8
42
1¾
45
17/8
48
2
52
17/8
48
2
52
2¼
56
60
2½
64
2½
64
68
2¾
72
3
76
3
76
80
3¼
85
3½
90
3¾
95
4
100
Tentec
No
1CTST:0016
1CTST:0018
1CTST:0020
1CTST:0022
1CTST:0024
1CTST:0027
2CTST:0030
2CTST:0033
2CTST:0036
2CTST:0039
3CTST:0039
3CTST:0042
3CTST:0045
3CTST:0048
3CTST:0052
4CTST:0048
4CTST:0052
4CTST:0056
4CTST:0060
4CTST:0064
5CTST:0064
5CTST:0068
5CTST:0072
5CTST:0076
6CTST:0076
6CTST:0080
6CTST:0085
6CTST:0090
6CTST:0095
6CTST:0100
Compression
kN
tonne
228
23
228
23
228
23
228
23
228
23
228
23
443
45
443
45
443
45
443
45
811
81
811
81
811
81
811
81
811
81
1273 128
1273 128
1273 128
1273 128
1273 128
1830 184
1830 184
1830 184
1830 184
2646 266
2646 266
2646 266
2646 266
2646 266
2646 266
hPa
inch²
2.35
2.35
2.35
2.35
2.35
2.35
4.58
4.58
4.58
4.58
8.38
8.38
8.38
8.38
8.38
13.16
13.16
13.16
13.16
13.16
18.9
18.9
18.9
18.9
27.35
27.35
27.35
27.35
27.35
27.35
mm²
1516
1516
1516
1516
1516
1516
2955
2955
2955
2955
5406
5406
5406
5406
5406
8490
8490
8490
8490
8490
12194
12194
12194
12194
17645
17645
17645
17645
17645
17645
Stroke
mm
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
Weight A
B
kg
mm mm
3.5
73
24
3.5
73
24
3.5
73
27
3
73
27
3
73
30
3
73
32
5
102 30
5
102 34
5
102 36
5
102 38
9
132 42
9
132 42
9
132 44
9
132 46
9
132 48
15
163 50
15
163 52
15
163 54
15
163 54
15
163 58
25
192 64
25
192 72
25
192 72
25
192 74
44
231 76
44
231 76
44
231 78
44
231 78
40.5
231 99
40.5
231 105
21750 Psi / 1500 bar
C
mm
110
110
110
115
125
130
150
150
160
170
175
185
195
205
210
205
215
235
238
254
254
258
258
258
260
264
272
272
300
305
D
mm
74
74
74
74
78
78
90
90
95
100
95
100
103
107
112
105
108
117
120
129
125
130
130
141
146
146
148
154
168
172
E
mm
45
45
45
45
45
45
54
54
54
54
56
56
56
56
56
56
56
56
56
56
60
60
60
60
64
64
64
64
64
64
Hydraulic nut with top collar
F
mm
49
49
51
51
60
60
72
74
76
80
88
90
94
100
104
110
112
118
126
126
136
144
146
154
162
162
174
185
200
212
"Tentec" A large problem when tightening joints is friction. When using a bolt tensioner you avoid the problem of
friction and work directly with clamping force. When you use one or more tensioners at the same time you can guarantee a correctly tightened joint.
Hydraulic nuts with top collar TCHN replace existing nuts and are both tool and nut at the same time. When
you expose the hydraulic nut to pressure the screw is stretched to the required length (pretightening) and via the top
mounted locking collar the nut is locked in the loaded position, the pressure is then released from the nut and the joint
is correctly tightened. The top mounted locking collar gives the possibility of access even when assembling in holes.
Art. no.
12788
(-0102)
Tentec
No
TCHN:0022
Thread
M 22
Pack.
qty
1
Tentec-no
metric
TCHN:0022
TCHN:0024
TCHN:0027
TCHN:0033
TCHN:0036
TCHN:0039
TCHN:0042
TCHN:0045
TCHN:0048
450
Thread
M
M 22
M 24
M 27
M 33
M 36
M 39
M 42
M 45
M 48
inch
7/8
1
1 1/8
1¼
1 3/8
1½
1 5/8
1¾
17/8
Please quote the
Tentec-no
inch
TCHN:0875
TCHN:1000
TCHN:1125
TCHN:1250
TCHN:1375
TCHN:1500
TCHN:1625
TCHN:1750
TCHN:1875
Compression
kN
190
205
220
265
325
373
424
445
523
tonne
19.1
20.6
22.1
26.6
32.6
37.5
42.6
44.6
52.5
O
mm
57
60
67
73
78
83
86
93
102
H
mm
40
44
46
48
52
56
58
60
64
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
S
mm
5
5
5
5
6
6
6
6
8
Luna_torque.fm Page 451 Monday, March 30, 2009 11:45 AM
High torque wrenches (above 500 Nm)
M 52
M 56
M 64
M 68
M 72
M 80
M 90
M 95
M 100
M 110
M 125
M 140
M 150
2
2¼
2½
2¾
3
3¼
3½
3¾
4
4½
5
5½
6
TCHN:2000
TCHN:2250
TCHN:2500
TCHN:2750
TCHN:3000
TCHN:3250
TCHN:3500
TCHN:3750
TCHN:4000
TCHN:4500
TCHN:5000
TCHN:5500
TCHN:6000
629
781
941
1042
1246
1607
2027
2160
2466
2814
3820
4954
5655
63.1
78.3
94.4
104.5
125.1
161.3
203.4
216.7
247.5
282.4
383.4
497.1
567.5
112
72
124
75
131
81
144
89
159
96
176
104
182
114
200
117
215
126
244
138
272
150
290
168
294
174
33000 Psi/2275 bar
8
8
8
8
10
10
10
10
15
15
15
15
15
Torque wrenches
TCHN:0052
TCHN:0056
TCHN:0064
TCHN:0068
TCHN:0072
TCHN:0080
TCHN:0090
TCHN:0095
TCHN:0100
TCHN:0110
TCHN:0125
TCHN:0140
TCHN:0150
Max. pressure
5
Hydraulic nuts with bottom collar
"Tentec" A large problem when tightening joints is friction. When using a bolt tensioner you avoid the problem of
friction and work directly with clamping force. When you use one or more tensioners at the same time you can guarantee a correctly tightened joint.
Hydraulic nuts with bottom collar BCHN replace existing nuts and are both tool and nut at the same time.
When you expose the hydraulic nut to pressure the screw is stretched to the required length (pretightening) and via
the bottom mounted locking collar the nut is locked in the loaded position, the pressure is then released from the nut
and the joint is correctly tightened.
Art. no.
12789
(-0101)
Tentec
No
BCHN:0022
Thread
M 22
Pack.
qty
1
Tentec-no
Thread
Tentec-no
Compression
O
H
metric
M
inch
inch
kN
tonne
mm
mm
BCHN:0022 M 22
7/8
BCHN:0875 190
19.1
54
48
BCHN:0024 M 24
1
BCHN:1000 205
20.6
57
48
BCHN:0027 M 27
1 1/8
BCHN:1125 220
22.1
60
48
BCHN:0033 M 33
1¼
BCHN:1250 265
26.6
67
51
BCHN:0036 M 36
1 3/8
BCHN:1375 325
32.6
73
54
BCHN:0039 M 39
1½
BCHN:1500 373
37.5
78
56
BCHN:0042 M 42
1 5/8
BCHN:1625 424
42.6
83
58
BCHN:0045 M 45
1¾
BCHN:1750 445
44.6
86
60
BCHN:0048 M 48
17/8
BCHN:1875 523
52.5
93
70
BCHN:0052 M 52
2
BCHN:2000 629
63.1
102
71
BCHN:0056 M 56
2¼
BCHN:2250 781
78.3
112
75
BCHN:0064 M 64
2½
BCHN:2500 941
94.4
124
86
BCHN:0068 M 68
2¾
BCHN:2750 1042
104.5
131
90
BCHN:0072 M 72
3
BCHN:3000 1246
125.1
144
94
BCHN:0080 M 80
3¼
BCHN:3250 1607
161.3
159
104
BCHN:0090 M 90
3½
BCHN:3500 2027
203.4
176
114
BCHN:0095 M 95
3¾
BCHN:3750 2160
216.7
182
118
BCHN:0100 M 100
4
BCHN:4000 2466
247.5
200
124
BCHN:0110 M 110
4½
BCHN:4500 2814
282.4
215
136
BCHN:0125 M 125
5
BCHN:5000 3820
383.4
244
148
BCHN:0140 M 140
5½
BCHN:5500 4954
497.1
272
164
BCHN:0150 M 150
6
BCHN:6000 5655
567.5
290
176
Max. pressure
33000 Psi/2275 bar
S
mm
5
5
5
5
6
6
6
6
6
8
8
8
8
10
10
10
10
15
15
15
15
15
Hydraulic hoses
Flexible hydraulic hoses
"Tentec" PLY 4 - Blue. Flexible hydraulic hose of polyamide. Hose with four layers of steel reinforcement. The hoses
are supplied with swivel connection thread "non-drip" quick connect couplings, seals and dust protection. Suitable for
hydraulic clamps, hydraulic impact wrenches, pumps, cylinders and accessories with a max working pressure of 1500 bar.
Hoses
Length
Connection
Bursting pressure
Art. no
Pack
Designation
m
BSP
PSI (bar)
14111
qty
HTT.4425.100A 1.0
¼
21750 (1500)
(-0106)
1
HTT.4425.150A 1.5
¼
21750 (1500)
(-0205)
1
HTT.4425.200A 2.0
¼
21750 (1500)
(-0304)
1
HTT.4425.250A 2.5
¼
21750 (1500)
(-0403)
1
HTT.4425.300A 3.0
¼
21750 (1500)
(-0502)
1
HTT.4425.350A 3.5
¼
21750 (1500)
(-0601)
1
HTT.4425.400A 4.0
¼
21750 (1500)
(-0700)
1
HTT.4425.500A 5.0
¼
21750 (1500)
(-0809)
1
HTT.4425.600A 6.0
¼
21750 (1500)
(-0908)
1
HTT.4425.700A 7.0
¼
21750 (1500)
(-1005)
1
HTT.4425.800A 8.0
¼
21750 (1500)
(-1104)
1
HTT.4425.900A 9.0
¼
21750 (1500)
(-1203)
1
451
Luna_torque.fm Page 452 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
High torque wrenches (above 500 Nm)
Flexible hydraulic hoses
"Tentec" PLY 6 - Red. Flexible hydraulic hose of polyamide. Hose with six layers of steel reinforcement. The hoses
are supplied with swivel connection thread "non-drip" quick connect couplings, seals and dust protection. Suitable for
hydraulic clamps, hydraulic impact wrenches, pumps, cylinders and accessories with a max working pressure of 2275 bar.
Hoses
Length
Connection
Bursting pressure
Art. no
Pack
Designation
m
BSP
PSI (bar)
14112
qty
HTT.4444.100A 1.0
¼
33000 (2275)
(-0105)
1
HTT.4444.130A 1. 3
¼
33000 (2275)
(-0204)
1
HTT.4444.150A 1.5
¼
33000 (2275)
(-0303)
1
HTT.4444.200A 2.0
¼
33000 (2275)
(-0402)
1
HTT.4444.250A 2.5
¼
33000 (2275)
(-0501)
1
HTT.4444.300A 3.0
¼
33000 (2275)
(-0600)
1
HTT.4444.350A 3.5
¼
33000 (2275)
(-0709)
1
HTT.4444.400A 4.0
¼
33000 (2275)
(-0808)
1
HTT.4444.450A 4.5
¼
33000 (2275)
(-0907)
1
HTT.4444.500A 5.0
¼
33000 (2275)
(-1004)
1
HTT.4444.550A 5.5
¼
33000 (2275)
(-1103)
1
HTT.4444.600A 6.0
¼
33000 (2275)
(-1202)
1
HTT.4444.700A 7.0
¼
33000 (2275)
(-1301)
1
HTT.4444.800A 8.0
¼
33000 (2275)
(-1400)
1
HTT.4444.900A 9.0
¼
33000 (2275)
(-1509)
1
Hydraulic pumps
Hydraulic pump for high torque wrenches
"Christie" Xtra-series of hydraulic 2-step pumps are available for both single and double acting formats This gives a
broad application area, from hydraulic clamps to hydraulic impact wrenches. All pumps are designed for industrial use.
All pumps are designed for industrial use. The Xtra-series is available in pneumatic and electric powered designs.
Art. no.
12309 (-0102)
(-0201)
(-0300)
(-0409)
(-0508)
(-0607)
Art. no.
No
ASR 70X ADM 70X ADR 70X ESR 70X EDM 70X EDR 70X
Power source
Pneumatic
Electric
Acting
Single
Double
Double
Single
Double
Double
Control
Remote
Manual
Remote
Remote
Manual
Remote
Weight
kg
35
35
36
35
38
39
kg
mm
410x205x305
540x205x305
Type of oil
32 mineral
32 mineral
Tank volume
l
7
7
Max pressure
l
690
690
Flow step 1
l/min
12
10
Flow step 2
/min
1.7
1
Pressure gauge diameter
mm
80
80
Gauge tolerance
%
±1% f.s.d.
±1% f.s.d.
Air consumption
l/sec
58
Voltage
V
240
240
240
Air connection
BSP
½ T-plug
Power consumption
kW
0.75
0.75
0.75
Pack.
qty
1
1
1
1
1
1
Hydraulic pump
"Christie" The Micron-series of hydraulic 2-step pumps are available in both single and double acting formats. A low
weight makes the pumps easy-to-carry. This gives a broad application area, from hydraulic clamps to hydraulic impact
wrenches. All pumps are designed for industrial use. The Micron-series is offered in both pneumatic and electric powered designs. All pumps are supplied with certificate, hose and couplings.
Art. no.
12310 (-0109)
(-0208)
(-0307)
(-0406)
(-0505)
(-0604)
Christie
No
ASR 70M ADM 70M ADR 70M ESE 70M
EDM 70M EDR 70M
Power source
Pneumatic
Electric
Acting
Single
Double
Double
Single
Double
Double
Control
Remote
Manual
Remote
Remote
Manual
Remote
Weight
kg
14
15.5
19
24
25
27
Height x width x depth
mm
325x170x250
435x170x250
Type of oil
32 mineral
32 mineral
Tank volume
l
4.5
4.5
Max. pressure
bar
690
690
Flow step 1
l/min
7
6
Flow step 2
l/min
0.9
0.8
Pressure gauge diameter
mm
50
80
Pressure gauge tolerance
%
±1.6% f.s.d.
±1% f.s.d.
Air consumption
l/sec
31
Voltage
V
240
Air pressure
bar
6.2
Air connection
BSP
½
Power consumption
kW
0.55
Pack.
qty
1
1
1
1
1
1
452
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 453 Monday, March 30, 2009 11:45 AM
Assembly tools
Assembly tools
Pulsator torque wrench
Impact wrench, hydraulic
"Yokota" Hydraulic impact wrench/power driver with double turbine air motor which generates more power and
higher production speeds. Easy-to-adjust torque and tightening time. The machines continue to impact at the set torque
when this has been reached. Accuracy of ± 10%. Unique hydraulic double blade hammer mechanism that reduces vibration as well as sound level. Patented oil cooling system which ensures the tolerances remain even with intensive utilisation. The machines have an ergonomic design, are small and light and require no more than 6 bar pressure.
Suitable where demands are made on accuracy and the torque being reached quickly.
Equipped with hanging eye, soft rubber handle and silenced exhaust in the handle.
E = square-drive.
A = Quick chuck for bits with hex-drive (design 4).
S = Straight model.
Brochure on request 10329-9996.
Art. no.
10329 (-0102)
(-0201)
(-0300)
(-0409)
(-0508)
Yokota
No
Y-41A
Y-40SA
Y-46A
Y-46E
Y-56A
Socket drive square
inch
3/8
For bits with hexedge drive (design 4)
inch
¼
¼
¼
¼
Bolt capacity
mm
4-6
4-6
5-6
5-6
6-8
Speed
rpm
9300
10000
8000
8000
7000
Tightening torque min.-max.
Nm
6-12
6-12
16-26
16-30
22-33
Noise level (according to DIN 45635)
dB (A) 72
69
80
80
80
Vibrations (according to NEN-ISO 5349) m/s²
2.1
4.6
1.0
1.0
1.0
Rec. hose dimension
inch
¼
¼
3/8
3/8
3/8
Connection thread
G (R)
¼
¼
¼
¼
¼
Air consumption*
l/min
300
300
348
348
396
Air consumption*
l/s
5.0
5.0
5.8
5.8
6.6
Weight
kg
0.7
0.8
0.9
0.9
0.9
Pack.
qty
1
1
1
1
1
Art. no.
10329 (-0607)
(-0706)
(-0805)
-0904
(-1001)
Yokota
No
Y-56E
Y-61A
Y-61E
Y-70E
Y-90E
Socket drive square
inch
3/8
3/8
3/8
½
For bits with hexedge drive (design 4)
inch
¼
Bolt capacity
mm
6-8
6-8
6-8
8-10
10-12
Speed
rpm
7000
5500
5500
5500
5000
Tightening torque min.-max.
Nm
25-47
27-41
34-54
44-72
78-116
Noise level (according to DIN 45635)
dB (A) 80
74
74
75
72
Vibrations (according to NEN-ISO 5349) m/s²
1.0
1.0
1.0
2.0
1.5
Rec. hose dimension
inch
3/8
3/8
3/8
3/8
3/8
Connection thread
G (R)
¼
¼
¼
¼
¼
Air consumption*
l/min
396
396
396
450
498
Air consumption*
l/s
6.6
6.6
6.6
7.5
8.3
Weight
kg
0.9
1.0
1.0
1.4
1.9
Pack.
qty
1
1
1
1
1
Art. no.
10329 -1100
(-1209)
(-1308)
Yokota
No
Y-100E
Y-130E
Y-140E
Socket drive square
inch
½
½
¾
For bits with hexedge drive (design 4)
inch
Bolt capacity
mm
12
14
16
Speed
rpm
5000
3500
3300
Tightening torque min.-max.
Nm
100-145 140-220 160-270
Noise level (according to DIN 45635)
dB (A) 80
82
82
Vibrations (according to NEN-ISO 5349) m/s²
2.1
2.2
3.3
Rec. hose dimension
inch
½
½
½
Connection thread
G (R)
¼
¼
¼
Air consumption*
l/min
708
768
786
Air consumption*
l/s
11.8
12.8
13.1
Weight
kg
2.0
2.5
3.2
Pack.
qty
1
1
1
Torque wrenches
Assembly tools
5
453
Luna_torque.fm Page 454 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Assembly tools
Impact wrench, hydraulic
"Yokota" Hydraulic impact wrench/power driver with double turbine air motor which generates more power and
higher production speeds. Easy to adjust the torque. Unique hydraulic double blade hammer mechanism that reduces
vibration as well as sound level. Oil cooling system which ensures the tolerances remain even with intensive utilisation.
The machines have an ergonomic design, are small and light and require no more than 6 bar pressure.
Suitable where demands are made on accuracy and the torque being reached quickly.
Equipped with hanging eye, soft rubber handle and silenced exhaust in the handle.
Art. no.
12981 -0107
-0156
-0206
-0305
-0404
Yokota
No
YLA-70
YLA-70A YLA-80
YLA-90
YLA-110
For bits with hex-edge drive (design 4)
inch
¼
Socket drivesquare
inch
3/8
3/8
3/8
½
Bolt capacity
mm
6-8
6-8
8
8-10
10-12
Speed
rpm
7000
7000
7000
6500
6000
Tightening torque min.-max.
Nm
20-35
20-28
33-50
45-70
65-105
Noise level (according to DIN 45635)
dB (A) 74
74
75
78
81
Vibrations (according to NEN-ISO 5349) m/s²
1.4
1.4
1.2
1.2
1.8
Rec. hose dimension
inch
¼
¼
3/8
3/8
3/8
Connection thread
G (R) ¼
¼
¼
¼
¼
Air consumption*
l/min
300
300
300
348
576
Air consumption*
l/s
5.5
5.5
5.8
6.7
9.6
Weight
kg
0.8
0.8
0.9
1.0
1.4
Pack.
qty
1
1
1
1
1
Impact wrench, hydraulic
"Yokota" Hydraulic impact wrench/power driver with double turbine air motor which generates more power and
higher production speeds. Easy-to-adjust torque and tightening time. The machines switch off automatically when the
set tightening torque is reached. Accuracy of ± 10%. Unique hydraulic double blade hammer mechanism that reduces
vibration as well as sound level. Patented oil cooling system which ensures the tolerances remain even with intensive
utilisation. The machines have an ergonomic design, are small and light and require no more than 6 bar pressure.
Suitable where demands are made on accuracy and the torque being reached quickly.
Equipped with sensitive throttle with 3-steps, hanging eye, soft rubber handle and silenced exhaust in the handle.
E = square-drive.
A = Quick chuck for bits with hex-drive (design 4).
Brochure on request 10329-9996.
Art. no.
10330
(-0059)
(-0109)
(-0208)
Yokota
No
Y-T40A
Y-T45E
Y-T45A
Socket drivesquare
inch
3/8
Bolt capacity
mm
4-5
6
6
For bits with hex-edge drive (design 4)
inch
¼
¼
Speed
rpm
6000
7000
7000
Tightening torque min.-max.
Nm
8-13
17-25
15-20
Noise level (according to DIN 45635)
dB (A)
82
74
74
Vibrations (according to NEN-ISO 5349) m/s²
2.2
1.6
1.6
Rec. hose dimension
inch
3/8
3/8
3/8
Connection thread
G (R)
¼
¼
¼
Air consumption*
l/min
360
348
348
Air consumption*
l/s
6
5.8
5.8
Weight
kg
0.95
1.1
1.1
Pack.
qty
1
1
1
Art. no.
10330
(-0301)
-0406
-0505
(-0604)
Yokota
No
Y-T55E
Y-T55A
Y-T70E
Y-T90E
Socket drivesquare
inch
3/8
3/8
½
Bolt capacity
mm
6-8
6-8
10
10-12
For bits with hex-edge drive (design 4)
inch
¼
Speed
rpm
6000
6000
5500
5000
Tightening torque min.-max.
Nm
25-38
20-30
40-55
60-90
Noise level (according to DIN 45635)
dB (A)
75
75
82
85
Vibrations (according to NEN-ISO 5349) m/s²
2.3
2.3
2.1
1.5
Rec. hose dimension
inch
3/8
3/8
3/8
3/8
Connection thread
G (R)
¼
¼
¼
¼
Air consumption*
l/min
348
348
396
450
Air consumption*
l/s
5.8
5.8
6.6
7.5
Weight
kg
1.1
1.1
1.5
1.9
Pack.
qty
1
1
1
1
454
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 455 Monday, March 30, 2009 11:45 AM
Assembly tools
"Yokota" Hydraulic impact wrench/power driver with double turbine air motor which generates more power and
higher production speeds. Easy-to-adjust torque and tightening time. Suitable where demands are made on accuracy and
the torque being reached quickly. Unique hydraulic double blade hammer mechanism that reduces vibration as well as
sound level. Patented oil cooling system which ensures the tolerances remain even with intensive utilisation. The machine should be used together with the Yokota Poke-Yoke controller YTC-2 art. no 12701-0106. With a number of
easily adjusted parameters you can create reliable machine shut off, count the number of approved joints and receive an
output signal for external equipment with an OK. The machines have an ergonomic design, are small and light and require no more than 6 bar pressure.
Equipped with hanging eye, soft rubber handle and silenced exhaust in the handle.
Hose cover as accessory: Protects the hoses from the machine to equipment.
E = square-drive.
A = Quick chuck for bits with hex-drive (design 4).
S = Straight model.
Brochure on request.
Art. no.
12687 (-0104)
(-0203)
(-0302)
Yokota
No
Y-41A-J
Y-46E-J
Y-56E-J
Socket drivesquare
inch
3/8
3/8
For bits with hex-drive (design 4)
inch
¼
Bolt capacity
mm
4-6
5-6
6-8
Speed
rpm
9300
8000
7000
Tightening torque min.-max.
Nm
6-12
16-30
25-47
Noise level (according to DIN 45635)
dB (A) 72
80
80
Vibrations (according to NEN-ISO 5349)
m/s²
2.1
1.0
1.0
Rec. hose dimension
inch
¼
3/8
3/8
Connection thread
NPT
¼
¼
¼
Air consumption*
l/min
300
348
396
Air consumption*
l/s
5.0
5.8
6.6
Weight
kg
0.7
0.9
0.9
Pack.
qty
1
1
1
Hose cover
12687 (-1003)
(-1003)
(-1003)
Pack.
m
1
1
1
Art. no.
12687 (-0401)
(-0500)
(-0609)
Yokota
No
Y-61E-J
Y-70-J
Y-90E-J
Socket drivesquare
inch
3/8
3/8
½
For bits with hex-drive (design 4)
inch
Bolt capacity
mm
6-8
8-10
10-12
Speed
rpm
5500
5500
5000
Tightening torque min.-max.
Nm
34-54
44-72
78-116
Noise level (according to DIN 45635)
dB (A) 74
75
72
Vibrations (according to NEN-ISO 5349)
m/s²
1.0
2.0
1.5
Rec. hose dimension
inch
3/8
3/8
3/8
Connection thread
NPT
¼
¼
¼
Air consumption*
l/min
396
450
498
Air consumption*
l/s
6.6
7.5
8.3
Weight
kg
1.0
1.4
1.9
Pack.
qty
1
1
1
Hose cover
12687 (-1003)
(-1003)
(-1003)
Pack.
m
1
1
1
Art. no.
12687 (-0708)
(-0807)
(-0906)
Yokota
No
Y-100E-J
Y-130E-J
Y-140E-J
Socket drivesquare
inch
½
½
¾
For bits with hex-drive (design 4)
inch
Bolt capacity
mm
12
14
16
Speed
rpm
5000
3500
3300
Tightening torque min.-max.
Nm
100-145
140-220
160-270
Noise level (according to DIN 45635)
dB (A) 60
83
82
Vibrations (according to NEN-ISO 5349)
m/s²
2.1
2.2
3.3
Rec. hose dimension
inch
½
½
½
Connection thread
NPT
¼
¼
¼
Air consumption*
l/min
708
768
786
Air consumption*
l/s
11.8
12.8
13.1
Weight
kg
2.0
2.5
3.2
Pack.
qty
1
1
1
Hose cover
12687 (-1003)
(-1003)
(-1003)
Pack.
m
1
1
1
Torque wrenches
Impact wrench
5
455
Luna_torque.fm Page 456 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Assembly tools
Control unit Poke Yoke YTC-2
"Yokota" The Poke Yoke System checks the torque by measuring the incoming air pressure in the motor. By measuring the air pressure the electronics discover when the torque builds up and then activates the "timer" which affects
the shutoff. The adjustment of the "timer" is adapted to whether the joint is hard of soft. In addition, the control box
discovers whether the screw has already been tightened or whether the machine is switched off in advance. The torque
is adjusted using the machines adjuster screw. Through the torque setting of the machine and parameters in the control
box YTC-2 a reliable shutoff of the required torque is obtained. On a completed screw cycle the operator receives a
green lamp and a signal that informs everything is okay (OK). With incorrect tightening the operator receives a red lamp
and a signal informing that something is wrong (NOK). Brochure on request.
Art. no.
12701
(-0106)
Yokota
No
YTC-2
Mains voltage
inch
230
Pack.
qty
1
System solution YETC-200
"Yokota" YETC-200 system solution checks the tightness of bolted joints electronically. The system is based on an
air-hydraulic power driver equipped with a rotary transducer. The transducer measures the torque on the output drive
axle and sends a signal electronically to the control unit. Using a pressure equaliser the controller shuts down the tool
when the required torque is reached.
The microprocessor in YETC-200 receives the signal and determines whether the set demands have been satisfied or
not. The operator can be informed via audio and visual signals about the status of the tightened bolted joint. The equipment can handle up to 8 different programmed groups and each group can handle up to 99 bolted joints. YETC-200 is
easily programmed using either the display or via a PC with YETC-software. A printer can be connected to document
the results or these can be transferred to a PC. The PC software also includes the possibility to produce different types
of diagrams/graphs.
For more information contact us. Brochure on request.
Art. no.
12707
(-0100)
Yokota
No
YETC-200
Pack.
qty
1
Torque wrench pneumatic
Power driver
"Yokota" Gun model. Two-stage wrench. Reversible with slip clutch. External adjustment for the required tightening
torque. Return air led off through the handle which is fitted with a muffler. Low weight. Supplied with spanner.
Art. no.
2450
-0100
Yokota
No
YD-5PHCA
For bits with hex-drive (design 4)
inch
¼
Screw capacity
mm
5
Speed max.
rpm
1650
Tightening torque max.
Nm
6.6
Noise level (according to DIN 45635)
dB (A)
75
Vibrations (according to NEN-ISO 5349)
m/s²
2.0
Rec. hose dimension
inch
¼
Connection thread
G (R)
¼
Air consumption*
l/min
350
Air consumption*
l/s
5.8
Weight
kg
1.2
Pack.
qty
1
Power driver, gun model
"Yokota" Pistol model in reversible design. Equipped with quick and easy adjustable shut-off clutch. Starts automatically
when applied to the screw when the throttle is held in. Return air is led off through the handle. Reduced sound level
and less vibration. Suitable e.g. for garages and mechanical workshops. Supplied with chuck for quick change of bits.
Art. no.
10327
-0104
Yokota
No
RRI-25100 P
For bits with hex-drive (design 4)
inch
¼
Screw capacity
mm
6
Speed
rpm
500
Torque
Nm
2.5-10
Noise level (according to DIN 45635)
dB (A)
74
Vibrations (according to NEN-ISO 5349)
m/s²
2,5
Rec. hose dimension
inch
¼
Connection thread
G (R)
¼
Air consumption*
l/min
378
Air consumption*
l/s
6.3
Weight
kg
1.1
Pack.
qty
1
456
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 457 Monday, March 30, 2009 11:45 AM
Assembly tools
"Luna" Gun model. Ergonomic grip recessed into the handle which insulates against cold air and vibrations. Stepless
trigger. Reversible. Swiveling air intake. 360°. Handle exhaust. Equipped with adjustable clutch mechanism at tighening
and full power without clutch at loosening. Automatic start when the bit is pressed to the screw when the trigger is
pulled. Suitable for car and mechanical workshops. Developed for professional workshop applications. Supplied with 3
different torque springs.
Art. no.
20775
-0100
Luna
No
ASD6-800
For bits with hex-ffix (perform. 4)
inch
¼
Screw capacity
mm
6
Rotating speed
r/min
800
Torque
Nm
1.1-14.6
Sound level (CEN/TC 255 N81)
dB (A)
82
Vibration (ISO 5349)
m/s²
0.7
Rec. hose dimension
inch
3/8
Air inlet
G (R)
¼
Air consumption*
l/min
555
Air consumption*
l/s
9.3
Weight
kg
0.95
Pack.
-
Torque wrenches
Screwdriver gun model
5
Power driver
"Cooper-Cleco" Series 14. Power driver. Gun with p-handle in reversible design. Equipped with adjustable shut-off
clutch. Clecomatic. Powerful machines well suited for constant industrial use. Rubber handle that insulates against the
cold. Return air through the handle. Very well-balanced and ergonomically designed. Starts automatically when applying
the screw when the throttle is held in.
Art. no.
12644 (-0106)
(-0205)
(-0304)
-0403
(-0502)
Cooper-Cleo
No
14PCA02Q 14PCA03Q 14PCA04Q 14PCA05Q 14PCA06Q
Torque
Nm
0.5-2.1
0.5-2.9
0.3-4.5
0.2-5.1
0.2-5.1
Speed
rpm
2800
1900
1100
660
260
For bits with hex-drive (design 4)
inch
¼
¼
¼
¼
¼
Noise level (acc to DIN 45635)
dB (A) 75
75
75
75
75
Vibrations (acc to NEN-ISO 5349) m/s²
2
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
¼
Connection thread
NPT 1/8
1/8
1/8
¼
1/8
Air consumption*
l/min 310
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
5.17
Length
mm
208
213
208
218
218
Weight
kg
0.8
0.8
0.8
0.8
0.8
Pack.
qty
1
1
1
1
1
Power driver
"Cooper-Cleco" Series 14. Power driver. Gun with p-handle in reversible design. Equipped with adjustable shut-off
clutch. Clecomatic. Powerful machines well suited for constant industrial use. Rubber handle that insulates against the
cold. Return air through the handle. Very well-balanced and ergonomically designed. Starts when the throttle is held in.
Art. no.
12645 (-0105)
(-0204)
(-0303)
(-0402)
Cooper-Cleo
No
14PTA02Q 14PTA03Q 14PTA04Q 14PTA05Q
Torque
Nm
0.5-2.1
0.5-2.9
0.3-4.5
0.2-5.1
Speed
rpm
2800
1900
1100
660
For bits with hex-drive (design 4)
inch
¼
¼
¼
¼
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
Connection thread
NPT
1/8
1/8
1/8
¼
Air consumption*
l/min
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
Length
mm
205
210
205
215
Weight
kg
0.8
0.8
0.8
0.8
Pack.
qty
1
1
1
1
Art. no.
12645 (-0501)
(-0600)
(-0709)
(-0808)
Cooper-Cleo
No
14PTA06Q 14PTA07Q 14PTA10Q 14PTA15Q
Torque
Nm
0.2-5.1
2.4-6.8
3.4-9.8
4.0-14.7
Speed
rpm
260
660
400
250
For bits with hex-drive (design 4)
inch
¼
¼
¼
¼
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
Connection thread
NPT
1/8
1/8
1/8
1/8
Air consumption*
l/min
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
Length
mm
215
249
254
249
Weight
kg
0.8
1.0
1.0
1.0
Pack.
qty
1
1
1
1
457
Luna_torque.fm Page 458 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Assembly tools
Power driver
"Yokota" Straight model. Slip clutch. Starts automatic when applied to the screw. One-hand operated reversing. External adjustment for the required tightening torque. Rear exhaust air flow with low noise level. Supplied with hanging
eye and spanner.
Art. no.
2453
-0107
Yokota
No
YD-400SCA
For bits with hex-drive (design 4)
inch
¼
Screw capacity
mm
4
Speed
rpm
1700
Noise level (according to DIN 45635)
dB (A)
77
Vibrations (according to NEN-ISO 5349)
m/s²
4.0
Rec. hose dimension
inch
¼
Tightening torque max.
Nm
3.2
Connection thread
G (R)
¼
Air consumption*
l/min
150
Air consumption*
l/s
2.5
Weight
kg
0.5
Pack.
qty
1
Power driver, straight model
"Yokota" Straight model in reversible design. Equipped with quick and easy adjustable shut-off clutch. Starts automatically when applied to the screw when the throttle is held in. Return air is led off through the handle. Reduced sound
level and less vibration. Suitable e.g. for garages and mechanical workshops.
Supplied with grip friendly vibration minimising handle, chuck for quick change of bits and hanging eye.
Art. no.
10328
(-0103)
Yokota
No
RRI-2580 SP
For bits with hex-drive (design 4)
inch
¼
Screw capacity
mm
5
Speed
rpm
1000
Torque
Nm
2.5-8
Noise level (according to DIN 45635)
dB (A)
77
Vibrations (according to NEN-ISO 5349)
m/s²
2,5
Rec. hose dimension
inch
¼
Connection thread
G (R)
¼
Air consumption*
l/min
480
Air consumption*
l/s
8.0
Weight
kg
0.9
Pack.
qty
1
Straight power driver
"Cooper-Cleco" Series 14. Straight model in reversible design. Equipped with adjustable shut-off clutch. Clecomatic.
Heavy-duty machines well suited for continuous industrial use. Embedded comfort grip which makes the machine light
and insulates against the cold. Very well-balanced and ergonomically designed. Return air through the handle with possibility of fitting a return air hose. Starts automatic when applied on the screw.
Art. no.
12035 (-0103)
(-0202)
(-0301)
(-0400)
(-0509)
14SPA02Q
14SPA03Q
14SPA04Q
14SPA05Q
14SPA06Q
Cooper-Cleo
No
Torque
Nm
0.5-2.1
0.5-2.9
0.4-4.5
2.0-5.1
2.0-5.1
Speed
rpm
2800
1900
1100
660
260
For bits with drive.hex (Design 4)
inch
¼
¼
¼
¼
¼
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
¼
Connection thread
NPT
1/8
1/8
1/8
1/8
1/8
Air consumption*
l/min
310
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
5.17
Length
mm
230
235
230
240
240
Weight
kg
0.63
0.64
0.61
0.67
0.68
Pack.
qty
1
1
1
1
1
Straight power driver
"Cooper-Cleco" Series 14. Straight model in reversible design. Equipped with adjustable shut-off clutch. Clecomatic.
Heavy-duty machines well suited for continuous industrial. Embedded comfort grip which makes the machine light and
insulates against the cold. Very well-balanced and ergonomically designed. Return air through the handle with possibility
of fitting a return air hose. Supplied with ¼ quick socket. Starts automatically when applied to the screw when the throttle is held in.
Art. no.
12034 (-0104)
-0203
-0302
(-0401)
(-0500)
14SCA02Q 14SCA03Q 14SCA04Q 14SCA05Q 14SCA06Q
Cooper-Cleo
No
Torque
Nm
0.5-2.1
0.5-2.9
0.4-4.5
2.0-5.1
2.0-5.1
Speed
rpm
2800
1900
1100
660
260
For bits with drive hex (Design 4)
inch
¼
¼
¼
¼
¼
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
¼
458
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 459 Monday, March 30, 2009 11:45 AM
Assembly tools
NPT
l/min
l/s
mm
kg
qty
1/8
310
5.17
249
0.69
1
1/8
310
5.17
254
0.70
1
1/8
310
5.17
249
0.66
1
1/8
310
5.17
259
0.73
1
1/8
310
5.17
259
0.74
1
Angled impact wrench
"Cooper-Cleco" Series 14. Stall angle wrench in reversible design. Torque adjusted via the air pressure. Powerful machines well suited for constant industrial use. Rubber handle that insulates against the cold. Return air through the handle
with possibility of fitting a return air hose. Extremely well-balanced and ergonomic design.
Art. no.
12031 (-0107)
(-0206)
(-0305)
(-0404)
14RAS03AM2
14RAS04AH2
14RAS05AM2
14RAS06A2H13
Cooper-Cleo
No
Torque
Nm
3.2
3.6
5.2
6,2
Speed
rpm
1700
1250
850
850
Socket drivesquare
inch
¼
¼
¼
¼
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
Connection thread
NPT
1/8
1/8
1/8
1/8
Air consumption*
l/min
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
Length
mm
289
284
268
279
Weight
kg
0.59
0.64
0.54
0.59
Pack.
qty
1
1
1
1
Torque wrenches
Connection thread
Air consumption*
Air consumption*
Length
Weight
Pack.
5
Angled impact wrench
"Cooper-Cleco" Series 14. Angled impact wrench. Single hand machine in reversibile design. Equipped with adjustable
shut-off clutch. Clecomatic. Powerful machines well suited for constant industrial use. Rubber handle that insulates
against the cold. Return air through the handle with possibility of fitting a return air hose. Very well-balanced and ergonomically designed.
Art. no.
12033 (-0105)
(-0204)
(-0303)
(-0402)
14RAA02AM2
14RAA02AH2
14RAA03AL2
14RAA03AM2
Cooper-Cleo
No
Torque
Nm
0.5-2.1
0.5-2.4
0.5-2.8
0.5-3.0
Speed
rpm
2400
2100
570
1650
Socket drivesquare
inch
¼
¼
¼
¼
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
Connection thread
NPT
1/8
1/8
1/8
1/8
Air consumption*
l/min
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
Length
mm
297
308
306
302
Weight
kg
0.77
0.82
0.82
0.82
Pack.
qty
1
1
1
1
Angled impact wrench
"Cooper-Cleco" Series 14. Angled impact wrench. Single hand machine in reversibile design. Equipped with adjustable
shut-off clutch. Clecomatic. Powerful machines well suited for constant industrial use. Rubber handle that insulates
against the cold. Return air through the handle with possibility of fitting a return air hose. Very well-balanced and ergonomically designed.
Art. no.
12032 (-0205)
-0106
-0304
(-0403)
14RAA07AH3
14RAA09AH3
14RAA11AH3
14RAA12AH3
Cooper-Cleo
No
Torque
Nm
0.5-6.8
1.1-8.5
1.1-11.0
1.1-11.0
Speed
rpm
500
500
340
200
Socket drivesquare
inch
3/8
3/8
3/8
3/8
Noise level (according to DIN 45635)
dB (A) 75
75
75
75
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
Rec. hose dimension
inch
¼
¼
¼
¼
Connection thread
NPT
1/8
1/8
1/8
1/8
Air consumption*
l/min
310
310
310
310
Air consumption*
l/s
5.17
5.17
5.17
5.17
Length
mm
318
340
345
340
Weight
kg
0.86
0.95
1.00
0.95
Pack.
qty
1
1
1
1
Angled impact wrench
"Cooper-Cleco" Series 24. Angle wrench in reversible design. Equipped with adjustable shut-off clutch. Clecomatic.
Powerful machines well suited for constant industrial use. Rubber handle that insulates against the cold. Very well-balanced and ergonomically designed. Return air through the handle with possibility of fitting a return air hose. Starts when
the throttle lever is held in.
Art. no.
12030
(-0108)
(-0207)
(-0306)
-0405
(-0504)
(-0603)
Cooper-Cleo
No
24RAA07AL2 24RAA11AL2 24RAA12AM3 24RAA19AM3 24RAA23AM3 24RAA26AH3
459
Luna_torque.fm Page 460 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Assembly tools
Torque
Speed
Socket drivesquare
Noise level (according
to DIN 45635)
Vibrations (according
to NEN-ISO 5349)
Rec. hose dimension
Connection thread
Air consumption*
Air consumption*
Length
Weight
Pack.
Nm
rpm
inch
dB (A)
5.0-7.0
1170
¼
78
7.0-11.0
1260
¼
78
6.0-12.0
1200
3/8
78
10.0-19.0
700
3/8
78
12.0-23.0
600
3/8
78
13.0-26.0
535
3/8
78
m/s²
2
2
2
2
2
2
inch
NPT
l/min
l/s
mm
kg
qty
5/16
3/8
680
11.33
358
1.2
1
5/16
3/8
680
11.33
358
1.2
1
5/16
3/8
680
11.33
360
1.3
1
5/16
3/8
680
11.33
380
1.4
1
5/16
3/8
680
11.33
380
1.4
1
5/16
3/8
680
385
575
1.4
1
Angled impact wrench
"Cooper-Cleco" Series 34. Angle wrench in reversible design. Equipped with adjustable shut-off clutch. Clecomatic.
Powerful machines well suited for constant industrial use. Rubber handle that insulates against the cold. Very well-balanced and ergonomically designed. Return air through the handle with possibility of fitting a return air hose. Starts when
the throttle lever is held in.
Art. no.
12036
(-0102)
(-0201)
-0300
Cooper-Cleo
No
34RAA26AH3
34RAA28AH3
34RAA33AX3
Torque
Nm
13.0-26.0
14.0-28.0
17.0-33.0
Speed
rpm
710
580
545
Socket drivesquare
inch
3/8
3/8
3/8
Noise level (according to DIN 45635)
dB (A)
80
80
80
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
Rec. hose dimension
inch
5/16
5/16
5/16
Connection thread
NPT
3/8
3/8
3/8
Air consumption*
l/min
960
960
960
Air consumption*
l/s
16
16
16
Length
mm
390
390
393
Weight
kg
1.5
1.5
1.6
Pack.
qty
1
1
1
Art. no.
12036
(-0409)
-0508
-0607
(-0706)
Cooper-Cleo
No
34RAA37AX3
34RAA47AX3
34RAA68AZ4
34RAA75AZ4
Torque
Nm
18.0-37.0
24.0-47.0
34.0-68.0
38.0-75.0
Speed
rpm
480
385
255
155
Socket drivesquare
inch
3/8
3/8
½
½
Noise level (according to DIN 45635)
dB (A)
80
80
80
80
Vibrations (according to NEN-ISO 5349)
m/s²
2
2
2
2
Rec. hose dimension
inch
5/16
5/16
5/16
5/16
Connection thread
NPT
3/8
3/8
3/8
3/8
Air consumption*
l/min
960
960
960
960
Air consumption*
l/s
16
16
16
16
Length
mm
397
397
411
431
Weight
kg
1.5
1.5
1.7
1.8
Pack.
qty
1
1
1
1
Angled impact wrench
"Cooper-Cleco" Series 75. Stall angle wrench in reversible design. Torque adjusted via the air pressure. Powerful machines well suited for constant industrial use. Supplied with fitted plate for counterhold arm. Well-balanced and ergonomic design. Starts when the throttle lever is held in.
Art. no.
12037
(-0507)
(-0606)
-0705
Cooper-Cleo
No
75RNL-3V-4
75RNL-3X-6
75RNAL-2X-6
Max. tightening torque at 6.2 bar.
Nm
210
330
440
Speed
rpm
190
120
90
Socket drivesquare
inch
½
¾
¾
Noise level (according to DIN 45635)
dB (A)
82
82
82
Vibrations (according to NEN-ISO 5349)
m/s²
2.5
2.5
2.5
Rec. hose dimension
inch
½
½
½
Connection thread
NPT
½
½
½
Air consumption*
l/min
1980
1980
1980
Air consumption*
l/s
33
33
33
Length
mm
492
511
511
Weight
kg
5.2
6.0
6.0
Pack.
qty
1
1
1
460
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 461 Monday, March 30, 2009 11:45 AM
Torque measurement instruments
"Cooper-Cleco" Series 75. Angle wrench in reversible design. Equipped with adjustable shut-off clutch. Clecomatic.
Powerful machines well suited for constant industrial use. Supplied with fitted plate for counterhold arm. Well-balanced
and ergonomic design. Starts when the throttle is held in.
Art. no.
12037 (-0101)
(-0200)
(-0309)
(-0408)
75RNAL-3V-4
75RNAL-2V-4
75RNAL-3X-6
75RNAL-2X-6
Cooper-Cleo
No
Torque
Nm
95-190
122-255
150-305
203-410
Speed
rpm
175
130
110
80
Socket drivesquare
inch
½
½
¾
¾
Noise level (according to DIN 45635)
dB (A) 82
82
82
82
Vibrations (according to NEN-ISO 5349)
m/s²
2.5
2.5
2.5
2.5
Rec. hose dimension
inch
½
½
½
½
Connection thread
NPT
½
½
½
½
Air consumption*
l/min
1980
1980
1980
1980
Air consumption*
l/s
33
33
33
33
Length
mm
556
556
575
575
Weight
kg
6.0
6.0
6.8
6.8
Pack.
qty
1
1
1
1
Torque wrenches
Angled impact wrench
5
Torque wrench, electric
Tightening equipment
"Cooper-Cleco" Cooper TME and TMEM tightening equipment are designed to correctly tighten bolted joints when
high demands are required. The system has a modular design giving greater flexibility. TME manages both single applications with a hand held or fixed machines in jigs and more complicated joints that require multi-spindle, interconnected
power drivers. TMEM manages applications with hand held or fixed machines in jigs. Both systems feature the advanced
Cleco Tightening Manager System, that prevents results deviating from the set required target. The result is documented
and can easily be integrated in a factory network. Today, many assembly industries require easy communication and
management of joint data. Information shall be easily available for those that need it. Cooper-Cleco equipment is easily
programmed via the panel or PC. The software is Windows based and therefore very familiar to most people. TME and
TMEM manage different types of tools between 2 and 4000 Nm
For more information contact us. Brochure on request.
Art. no.
12708
(-0109)
(-0208)
(-0307)
Cooper-Cleo
No
TME-111
TME-121
TMEM-114
Pack.
qty
1
1
1
Torque measurement instruments
Torque measurement instruments
Mechanical
Mechanical analysers for torque screwdrivers
"Torqueleader" DM and TCA analysers are basic mechanical analysers to check torque screwdrivers and small
torque wrenches in production. Easy to read scale in two units facilitates the assessment of tools and gives complete
information about the need of calibration /adjustment of torque tools. Accuracy of the analysers is ±2% of the read value
(Class 4) within 20-100% of the measurement range. Supplied with calibration certificate.
Art. no.
12123
(-0106)
(-0205)
(-0304)
Torqueleader
No
013000
013100
013200
Torque range ISO
cNm
0-7
7-35
14-70
Torque range ISO
Nm
Graduation
cNm
0.5
0.5
1
Graduation
Nm
Torque range Imperial
ozf.in
0-10
10-50
20-100
Torque range Imperial
lbf.in
Measurement direction right/left
r/l
h
h
Drive ¼" hex-square
yes
yes
yes
Drive ¼" square-hole
yes
yes
Drive 3/8" square-hole
Nm
Pack.
qty
1
1
1
Art. no.
12123
(-0601)
(-0403)
-0502
(-0700)
Torqueleader
No
013450
013300
013400
013500
Torque range ISO
cNm
26-130
Torque range ISO
Nm
0.8-4
2.4-12
5.4-27
Graduation
cNm
2
Graduation
Nm
0.05
0.2
0.5
Torque range Imperial
ozf.in
36-180
Torque range Imperial
lbf.in
7.2-36
24-120
48-240
Measurement direction right/left
h
h
h
h
Drive ¼" hex-square
yes
yes
Drive ¼" square-hole
yes
yes
yes
yes
Drive 3/8" square-hole
Nm
yes
yes
Pack.
qty
1
1
1
1
461
Luna_torque.fm Page 462 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque measurement instruments
Electronic (digital)
Electronic torsion torque tester
"Rahsol" A flexible control measurement instrument for both clockwise and anti-clockwise torque measurement. The
measurement instrument features a removable display for free placement. The display has large, easy-to-read numbers.
Supplied with different adapters (see the table below). There are 4 preset measurement units Nm, cNm, lbf.ft or lbf.in.
The instrument has an accuracy of ±1% tolerance of reading value ±1 digit and is supplied with traceable to national
norms. Integrated V24/RS232 serial interface for PC/printer.
Art. no.
12284
(-0051)
(-0101)
(-0200)
(-0309)
Rahsol
No
8624-B01
8624-B10
8624-B50
8624-B100
Torque range ISO
Nm
0.5-15
4-100
20-500
50-1000
Resolution
Nm
0.001
0.01
0.10
0.10
Square drive
inch
¼
½
¾
¾
Square adapters
inch
¼, 3/8
3/8, ½
3/8, ½
Weight
kg
4.6
9.8
10.1
10.1
Pack.
qty
1
1
1
1
Torque tester
"Limit" Torque Check 350. Digital torque wrench tester for click type torque wrenches. Solid and simple to use.
Torque value on the wrench can be compared to ral value shown on the tester display.
Accuracy of ±1% of rading over range 35-350 Nm.
Supplied with a traceable calibration for clockwise direction.
Art. no.
13528
-0105
Limit
No
TC 350
Measuring range
Nm
35-350
Measuring range
lbf-ft
25-250
Square drive
inch
½
Pack
qty
1
Torque tester
"Norbar" Type TST. Complete instrument with integrated torque transducer for testing and calibration of small
torque tools (up to 25 Nm divided over three models). Also includes a joint simulator to check and test screw and nut
runners. The instrument also has an extra output for transducers with automatic transducer recognition (Norbar transducers) which is activated via a push button. The instrument is preprogrammed for different types of torque tools (control torque wrenches, click torque wrenches, screw and angle wrench, pulsating tools) which are activated by pressing
the symbol display. The instrument features adjustable limit values with visual and audio signals with approved or non
approved values. Supplied with integrated battery and possibility to connect an AC current 90-264 Volt. The number of
pulses is also tested when checking pulsating tools. Adjustable filter frequency for different application areas. Can also
be used for continuous monitoring, in tracking mode the torque value is measured and registered 11 times per second.
Analogue output for external OK/NOK signals. Password protected. Accuracy ± 0.1% of read value (class 0.2) 10-100%
of measured value, ± 1%.
¹) As standard the transducer is supplied with an accredited clockwise calibration certificate. Anti-clockwise calibration
can be offered if necessary.
²) Joint simulator included in measurement instrument and only applies when ordering as a spare part.
Art. no.
12129
(-0100)
(-0209)
(-0308)
Norbar
No
43212
43213
43214
Torque range ISO
Nm
0.04-2
0.5-10
1.25-25
Torque range Imperial
lbf.ft
0.4-20
5-100
12.5-250
Right/left action ¹)
yes
yes
yes
Output drive
inch
¼
¼
¼
Joint simulator ²)
yes
yes
yes
Joint simulator as a spare part
No
50539
50540
50541
Pack.
qty
1
1
1
Accessories for torque testers TST and TTT
"Norbar" Accessories for torque testers TST and TTT.
No 60216.200. Transducer cable 2 metres with 10 pin connector for Norbar rotating torque transducers.
No 60217.200. Transducer cable 2 metre with 6 pin connector for Norbar static and integrated torque transducers.
No. 26716. Transport and storage case for TTT measurement instruments.
No. 26717. Transport and storage case For TST measurement instruments.
Art. no.
12153
(-5991)
(-6007)
(-6106)
(-6205)
Norbar
No
60216.200
60217.200
26716
26717
Pack.
qty
1
1
1
1
Torque tester
"Norbar" Type TTT. Instrument that contains the same software as instrument TST. The instrument is however a
freestanding instrument without integrated transducer. The instrument has two outputs for external transducers with
automatic recognition of the transducer (Norbar).
Transducer and cable must be ordered separately.
Suitable transducer see art. no.
Art. no.
12130
(-0107)
Norbar
No
43215
Pack.
qty
1
462
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 463 Monday, March 30, 2009 11:45 AM
Torque measurement instruments
Torque wrenches
Torque tester Pro-Test
5
"Norbar" Type Pro-Test. A robust and basic measurement instruments designed to check torque wrenches in factory environments. Transducer and display are separate and can be easily changed if you require more transducers. The
display is illuminated and indicates the measured values with large, easy-to-read digits. Pro-Test offers three different
working modes, tracking for continuous measurement, first top value (where the torque wrench "clicks" and second
top value (the highest measured value). The software contains 10 different language, among which one is Swedish. Accuracy is ±0.5% (Class 1) from 20-100% of the transducers area and ±1% (Class 2) from 5-20% of the transducers area.
All transducers supplied with accredited Calibration certificate. All instruments have RS-232C computer outputs for
transfer to a PC/printer.
* As standard the transducer is supplied with an accredited clockwise calibration certificate. Anti-clockwise calibration
can be offered if necessary.
Transducer
12126
-1002
-1051
-1101
Norbar
No
43218
43219
43220
Torque range ISO
Nm
1.2-60
8-400
30-1500
Right/left action
yes
yes
yes
Hexagonal output drive
10 mm
22 mm
36 mm
Pack.
qty
1
1
1
Accessories
12126
-0509
(-0608)
-0707
Norbar
No
60188
60191
62198
Product
12V mains adapter Used together with Transport case
Wall bracket for12V DC car battery for portable use
mounting on a wall
Pack.
qty
1
1
1
Torque transducer
"Norbar" FMT-series. Torque transducers designed with mounting plate for easy fastening.
¹) As standard the transducer is supplied with an accredited clockwise calibration certificate. Anti-clockwise calibration
can be offered if necessary.
Art. no.
12296 (-0107)
(-0206)
(-0305)
(-0404)
(-0503)
(-0602)
Norbar
60571.log
50672.log
50673.log
50674.log
50675.log
50676.log
Torque range ISO
0.04-2
0.5-10
1.25-25
7.5-150
20-400
30-1500
Right/left action ¹)
yes
yes
yes
yes
yes
yes
Output drive
inch
¼
¼
¼ 3/8
3/8 / ½
½/¾
3/4/1
Joint simulator
yes
yes
yes
yes
Suitable instrument
12130-0107, 12130-0107, 12130-0107, 12130-0107, 12130-0107, 12130-0107,
TTT
TTT
TTT
TTT
TTT
TTT
Pack.
qty
1
1
1
1
1
1
Standard static torque transducer
"Norbar" Standard static torque transducer uses the same concept as the FMT-transducer with integrated chips for
automatic recognition of the measurement instrument (Norbar). They offer greater versatility due to their cylindrical
design. Can be used together with table fixtures. Supplied with accredited calibration certificate (UKAS), Accuracy ±0.5%
(Class 1) of read value 20-100% of transducers capacity. Ideally used with instrument TTT (art. no. 12130-0107).
The tables transducer can be offered with mv/V calibration for use with other instruments Norbar suffix .IND.
¹) As standard the transducer is supplied with an accredited clockwise calibration certificate. Anti-clockwise calibration
can be offered if necessary. For TTT/TST measurement instruments use cable art. no. 12153-6007.
Art. no.
12297
(-0106)
(-0205)
(-0304)
(-0403)
(-0502)
Norbar
No
50588.log
50589.log
50590.log
50591.log
50592.log
Torque range ISO
Nm
0.25-2.5
0.5-5
1-10
2.5-25
5-50
Right/left action ¹)
yes
yes
yes
yes
yes
Output drive
inch
¼ square
¼ square
¼ square
3/8 square
½ square
Bench fixture
No
50211
50211
50211
50212
50212
Calibration fixture
mm
UKAS
UKAS
UKAS
UKAS
UKAS
Pack.
qty
1
1
1
1
1
Art. no.
12297
(-0700)
(-0809)
(-0908)
Norbar
No
50701.log
50596.log
50597.log
50703.log
50599.log
Torque range ISO
Nm
25-250
50-500
1000-1000
250-2500
500-5000
Right/left action ¹)
yes
yes
yes
yes
yes
Output drive
inch
¾ square
¾ square
1 square
1½ square
1½ square
Bench fixture
No
50220
50220
50221
50127
50127
Calibration fixture
mm
UKAS
UKAS
UKAS
UKAS
UKAS
Pack.
qty
1
1
1
-
(-0601)
50593.log
10-100
yes
½ square
50213
UKAS
1
50600.log
1000-10000
yes
2½ square
traceable
-
Test jig
Testing device for torque wrenches
"Rahsol" The testing device is used to check torque wrenches and to guarantee precise calibration according to DIN
EN ISO 6789. Supplemented with torque wrench tester E-TP 8624. By using the testing device hand crank variations
that occur during calibration can be reduced. A sliding reaction point means that the side loads that affect the torque
wrench can be minimised. Large torque wrenches can be calibrated and or checked without problem. The testing device
can be disassembled for transporting purposes.
Test instrument and torque wrench not included.
Art. no.
6817 -0109
Rahsol
No 8612-830
Pack.
qty 1
463
Luna_torque.fm Page 464 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
Torque service
Torque service
Service - training - hiring
Calibration, service and repair of torque tools
Service and calibration of torque wrenches
We offer calibration, service and repair of all torque wrenches and makes available on the market (under the condition
that spare parts are available). Naturally our calibration is carried out according to applicable standards for torque
wrenches (ISO 6789) and traceability certificates are issued. When necessary, the torque wrench is adjusted during calibration, so as a customer you receive a correct torque wrench in return. When major repairs are necessary we always
contact the customer before starting work.
Service
Art. no.
Pack.
10592
qty
Calibration of torque wrench 0-400 Nm clockwise
(-1308)
1
Calibration of torque wrench 401-1000 Nm clockwise
(-1407)
1
Calibration of torque wrench 1001-2000 Nm clockwise
(-1506)
1
Additional calibration of torque wrench (special request)
(-1605)
1
Adjusting the torque wrench during calibration
(-1704)
1
Preset of torque on the torque wrench with certificate
(-1803)
1
Preset of torque on the torque wrench without certificate
(-1902)
1
ID-marking of the torque tool
(-2009)
1
Repair of the torque wrench
(-2108)
1
Cancellation charge
(-2116)
1
Service and calibration of torque multipliers
In order to ensure the correct multiplication of the torque multiplier and give a long life to the tool it is appropriate to
carry out maintenance and possible calibration of the torque multiplier. We offer these services. During calibration we
perform a test where we check the torque against calibrated torque wrenches and measure both the torque and actual
multiplication. Naturally the calibration includes a traceable calibration protocol.
Service
Art. no.
Pack.
10592
qty
Calibration of torque multiplier 0-10000 Nm
(-2124)
1
Additional calibration of the torque multiplier
(-2132)
1
Repair of the torque multiplier
(-2140)
1
Preventive maintenance of the torque multiplier
(-2157)
1
Cancellation charge
(-2116)
1
Service and calibration of pneumatic and electrical high torque wrenches
Via our brake bench we can simulate a rotating joint which is stopped by the force from a high torque wrench. It is
important to calibrate the high torque wrench as true as possible. We handle all stall-torque machines on the market
up to 10.000 Nm. We also carry out service, repair and periodic maintenance. Naturally the calibration includes a traceable calibration protocol.
Service
Art. no.
Pack.
10592
qty
Calibration of pneumatic high torque wrenches
(-2165)
1
Calibration of electrical high torque wrenches
(-2173)
1
Additional calibration of pneumatic and electrical high torque wrenches
(-2181)
1
Pressure gauge test 0-10 bar
(-2199)
1
Repair of high torque wrenches
(-2207)
1
Preventive maintenance pneumatic high torque wrenches
(-2215)
1
Cancellation charge
(-2116)
1
464
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Luna_torque.fm Page 465 Monday, March 30, 2009 11:45 AM
Torque service
Via our brake bench we can simulate a rotating joint which is stopped by the force from a hydraulic high torque wrench.
It is important to calibrate the high torque wrench as true as possible. We handle all machines on the market up to
10.000 Nm. We also carry out service, repair and periodic maintenance. Naturally the calibration includes a traceable
calibration protocol.
Service
Art. no.
Pack.
10592
qty
Calibration of hydraulic high torque wrenches
(-2223)
1
Additional calibration of hydraulic high torque wrenches
(-2231)
1
Pressure gauge test 0-700 bar
(-2249)
1
Repair of hydraulic high torque wrenches
(-2256)
1
Cancellation charge
(-2116)
1
Torque wrenches
Service and calibration of hydraulic high torque wrenches
5
Service and calibration of torque measurement equipment
We carry out the calibration of torque sensors and measuring instruments. Via our contact network we can offer the
calibration of torque sensors in different accuracy classes depending on our customers needs. As a part of our service
the torque sensors are inspected on our equipment to ensure that the probability of the sensor being correct before
costs for calibration are incurred. We cooperate with accredited measurement laboratories in Sweden, England, Germany and Italy. In addition to the services below, we also offer anti-clockwise calibration when necessary as well as conformity testing of measuring instruments. Please ask if you have other wishes.
* The calibration of Norbar torque equipment also includes the repair and adjustment of torque sensors when possible
to repair. When adjusting, measured values are documented before and after adjustment. Freight to and from England
is included in the price.
Service
SWEDAC (Sweden)
Art. no.
Pack.
10592
qty
Calibration of torque sensors 0-50 Nm clockwise traced
(-2314)
1
Calibration of torque sensors 51-500 Nm clockwise traced
(-2322)
1
Calibration of torque sensors 501-1500 Nm clockwise traced
(-2330)
1
General calibration of torque transducer clockwise traced
(-2348)
1
Calibration of torque sensors 0-5000 Nm clockwise traced
(-2355)
1
Service
UKAS (England)
Art. no.
Pack.
10592
qty
Calibration static torque sensors 0-50 Nm clockwise traced/left*
(-2264)
1
Calibration static torque sensors 51-500 Nm clockwise traced/left*
(-2272)
1
Calibration static torque sensors 501-1500 Nm clockwise traced/left*
(-2280)
1
Calibration static torque sensors 1501-5000 Nm clockwise traced/left*
(-2298)
1
Calibration rotating torque transducer 0-5000 Nm clockwise traced/left*
(-2355)
1
Calibration of PRO-TEST torque sensor clockwise traced/left*
(-2306)
1
Calibration TST measuring instruments and transducer clockwise traced/left*
(-2736)
1
Calibration TTT/PRO+-LOG measuring instruments clockwise traced/left*
(-2744)
1
Calibration ETS measuring instruments art. no. 40300-40327 traced/left*
(-2751)
1
Calibration ETS measuring instruments art. no. 40050-40094 traced/left*
(-2769)
1
Calibration of TWA measuring instruments and transducer traced/left*
(-2777)
1
465
Luna_torque.fm Page 466 Monday, March 30, 2009 11:45 AM
Torque wrenches
5
466
Torque service
Training - torque technology
Training - torque technology
An important part in overall quality assurance within torque tightening is knowledge of handling torque tools. In recent
years we have trained a large number of users of torque products. Courses last for one day and are aimed towards
fitters, designers, inspectors, production technicians and purchasers. Over and above standard courses we also offer
customer adapted training. Depending on the need we put together a program that suits the customers normal working
day. Please ask.
The courses include, among others:
Torque
Discusses the interacting forces applied to a bolted joint and what happens to the bolted joint.
Tool
A description of the different choices you should consider.
Working methods
Describes how you should work with torque tools and how you should assure the good quality of your joints.
ISO
A description of current ISO standards within the torque areas ISO 6789, ISO 5393.
Practice
Participants have the chance to test some of their knowledge.
Art. no.
10592
(-2389)
Course
Torque technology incl. course material
Pack.
per
1
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement