Full-cover case
for iPod touch
Protect iPod from the elements
in a full-cover, touch-through case
Interlocking silicone and polycarbonate provide 360-degree coverage for maximum
protection and minimal bulk. Enjoy full use of iPod while protected in the case, including
covers for the headphone jack and dock connector when not in use.
Extreme protection
• Covered buttons for push-through protection
• Dual-material construction provides strength and grip
• Interlocking 360-degree design for all-over coverage
• Silicone plugs seal openings when not in use
Protection on the go
• Slim design fits easily into your pocket
• Quick and easy protection in a snap
Screen protection
• Touch-through silicone for access while protected
Full-cover case
for iPod touch
Design and finishing
• Color(s): clear
• Materials: silicone/polycarbonate
Packaging dimensions
• Packaging type: Box
• Number of products included: 1
• Packaging dimensions (W x H x D):
5.0 x 7.0 x 1.0 inch
• Gross weight: 0.201 lb
• Nett weight: 0.099 lb
• Tare weight: 0.101 lb
• UPC: 6 09585 19477 9
Outer Carton
Number of consumer packagings: 18
Outer carton (L x W x H): 12.8 x 11.3 x 7.3 inch
Gross weight: 3.858 lb
Nett weight: 1.786 lb
Tare weight: 2.072 lb
GTIN: 2 06 09585 19477 3
Inner Carton
Number of consumer packagings: 3
Inner carton (L x W x H): 7.0 x 5.4 x 3.7 inch
Gross weight: 0.639 lb
Nett weight: 0.298 lb
Tare weight: 0.342 lb
GTIN: 1 06 09585 19477 6
Slim, pocket-friendly design
The slim design adds protection with minimal added
bulk, so your device still fits easily into your pocket
or bag for protection on the go.
Protection in a snap
This case is made from a durable material that is
custom made to fit your device perfectly. The case is
quick and easy to put on, and adds a layer of
protection to your device.
Covered buttons
The case material covers the volume buttons, giving
you push-through control while your device stays
Dual-material construction
Two materials combine for even better protection.
Made from an outer layer of durable see-through
silicone that adds secure grip, plus a backbone of
strong, crystal-clear polycarbonate that seals the
case closed.
Interlocking 360-degree design
Constructed of silicone and polycarbonate, the twopart case features an advanced seal to provide total,
360-degree coverage, protecting your device from
the elements when you need it most.
Silicone plugs seal openings
Integrated silicone plugs seal the headphone jack and
connector port for protection against the elements
when not in use.
Touch-through silicone
You can see your device's display through the
silicone face of the case. Plus, the silicone is touch
sensitive, allowing touch-through control of your
device for full functionality while protected inside the
Issue date 2014-03-14
© 2014 Koninklijke Philips N.V.
All Rights reserved.
Version: 2.1.2
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
12 NC: 8670 000 67184
UPC: 6 09585 19477 9