OTHER OPERATIONAL HARDWARE
MAGNETIC
HOLDERS
D-MDH-113
MODEL D-MDH-113
3/16"
5mm
2-3/4"
70mm
1-5/8"
41mm
4-1/2"
114mm
1-3/4"
44mm
2-17/32"
64mm
APPLICATION
• Wall Mount
• Low Profile
• Concealed Wiring
PRODUCT
DESCRIPTION & FEATURES
Total Projection
• 1-13/16" (46mm)
Mounting Requirements
• 2" x 4" x 2-1/2" (51 x 102 x 64mm) outlet box
• Wall must be properly reinforced and oulet
box adequately fastened
• UL listed door holder
TECHNICAL INFORMATION
Voltage and Current
• 120 VAC, 60Hz., .020 amp
• 24 VAC/DC, 60Hz., .020 amp
• 12VDC, .040 amp
• 250VAC, 50/60Hz., .009 amp
Shipping Weight
• 2 lbs. (0.9 kg)
FOR INFORMATION CALL 800.872.3267
OR VISIT RITEDOOR.COM
© 2016, HANCHETT ENTRY SYSTEMS, INC., AN ASSA ABLOY GROUP COMPANY
OTHER OPERATIONAL HARDWARE
MAGNETIC
HOLDERS
INSTALLATION
INSTALLATION
• Install where required by code, where doors
may be used to confine smoke or fire, or
wherever remote control or automatic closing
doors are required.
• Be sure door hardware and trim projections are
compatible with total projection of door release.
• Door-mounted contact plate includes
hardware for through-bolting or concealed
mounting.
• Spotting template included with unit ensures
correct alignment.
• 14AWG. Max. Wire Size.
• Anchor the electromagnet firmly since the
wall portion will function as a door stop.
• Locate magnet approximately 6 inches in
from lock edge of door. Wall magnets should
be mounted approximately 2 to 4 feet above
the floor for optimum performance.
FOR INFORMATION CALL 800.872.3267
OR VISIT RITEDOOR.COM
© 2016, HANCHETT ENTRY SYSTEMS, INC., AN ASSA ABLOY GROUP COMPANY
Download PDF