Handset Hardware Operation

Handset Hardware Operation Version V1.0
Handset Hardware Operation Ver1.0 Contents 1. Preface .................................................................................................1 2. Features................................................................................................1 3. Package Accessories ............................................................................3 3. Package Accessories ............................................................................3 4. Appearance, Installation and Connection ............................................4 4.1 Front View .................................................................................4 4.2 Back View..................................................................................5 4.3 Cradle.........................................................................................6 4.4 Lithium Battery Installation.......................................................6 4.5 Connect with PC through cradle................................................7 5. Extensible Slots ...................................................................................8 6. Technical Parameters ...........................................................................9 7. Communication Interface at the bottom ............................................12
Handset Hardware Operation Ver1.0 1. Preface In today's information age, no matter traditional industries or governments, health cares, banks, or retails, have become increasingly dependent on e­commerce transactions. With the increase in electronic transactions, fraud also increases. In order to prevent this threat, the consumer must prove himself the power to approve a transaction. In all biometric technologies, fingerprint image is the most accurate and the most matured products. It is also very convenient to use. The product has a wide range of commercial value and can be used in commercial electronic cash registers, bank savings, ATM machines, border control, time attendance, vehicle management, social security, population management, and customer loyalty surveys etc. Hand­set fingerprint POS machine is a management system developed by basing on my latest fingerprint identification module and Pocket PC with smart card. This system adopts security mechanisms and encryption technologies of IC cards for data encryption, and adopts biometric technologies to confirm the identity of the cardholder, so ensures the safety and legality. 2. Features Ø Adopt high­performance 32­bit embedded processor of ZK6001, CPU: speed of 400MHz, run WINDOWS CE 5.0 Ø Integration of universal high­performance UPEK silicon fingerprint sensor with the resolution as 500DPI Ø Support contactless IC cards, ID cards etc., which are compliant with the ISO14443­A/B standard. The optional equipments support
All copyrights are reserved ­ 1 ­ Handset Hardware Operation Ver1.0 the contact IC card with the standard ISO7816 and the contactless IC card with the standard ISO15693. Ø Adopt the hardware­encrypted chip to ensure that each machine has a hardware ID, and bind with user software to protect the intellectual property rights of software, so improve the terminal security, and make it wider application and the upgrade more safe and convenient. Ø Extension function: can extend the optional camera with 130­500 ten thousands pixels, GPRS, WIFI module, USB HOST/DEVICE. It can connect the external U disk and itself can also be used as a U disk. Ø Low consumption, long standby time, unique energy­saving design ensures a longer use time. Ø The battery of certification handset adopts lithium battery.
All copyrights are reserved ­ 2 ­ Handset Hardware Operation Ver1.0 3. Package Accessories Name Quantity Handset 1 Cradle 1 USB cable 1 1 USB cable 2 1 4000mA Picture lithium 1 battery Charger 1 Disk 1
All copyrights are reserved ­ 3 ­ Handset Hardware Operation Ver1.0 4. Appearance, Installation and Connection 4.1 Front View 1. On/Off key (long press for 3 seconds) 2. Indicator light (from left to right) Power light is on since power on Charging light is on when in charge Status light flashes during normal operation 3. UPEK fingerprint sensor 4. Color screen 5. Earphone 6. GPRS/WIFI antenna 7. Microphone hole 8. Cradle communication connecter 9. Head­set adapter 10. Hand strap attachment 11. Function key 12. Navigation key (Left, Right, Up, Down)
All copyrights are reserved ­ 4 ­ Handset Hardware Operation Ver1.0 4.2 Back View 1. The removable module 2. 1,300,000 pixels camera 3. Speaker 4. USB connector 5. Lithium battery cover 6. Touch pen
All copyrights are reserved ­ 5 ­ Handset Hardware Operation Ver1.0 4.3 Cradle 1. Power interface 2. Ethernet interface 3. RS232 interface 4. USB client: communication interface 5. USB host: connect the external USB 4.4 Lithium Battery Installation Press the bottom button down and then remove the battery cover. When loading lithium battery, please place the face with metal contacts down into the box. After loading, close the battery cover.
All copyrights are reserved ­ 6 ­ Handset Hardware Operation Ver1.0 4.5 Connect with PC through cradle After inserting into the cradle, the handset can connect with PC through USB cable 2.
All copyrights are reserved ­ 7 ­ Handset Hardware Operation Ver1.0 5. Extensible Slots 1) Use a screwdriver to loosen two fixed screws at the top, and then you can remove the fingerprint module at the top. Note: Please be careful to avoid pulling out the communication lines between the fingerprint module and the handset. Otherwise, re­fixing communication lines will become very difficult. In general, please don’t remove the fingerprint module at the top. 2)Suppose the fingerprint module is removed, the extensive slot at the top is as below shown: a) UPEK b) ID/MF Antenna c) Camera
All copyrights are reserved ­ 8 ­ Handset Hardware Operation Ver1.0 6. Technical Parameters Basic Parameters CPU Speed ZK6001 Operation System Windows CE 5.0 Cache 16K I­cache, 16K D­cache RAM Two pieces of SDRAM 64M Byte RAM Frequency 400MHZ Bus 112M FLASH 1 piece 8­bit Nand Flash, standard configuration 256M byte LCD Interface 3,2" QVGA TFT LCD LED backlight Touch Screen 4­wire resistive Keypad Interface 25­key waterproof and dustproof keyboard USB Interface One USB Host 1.1, one USB HOST/Device 1.1interface, can connect with PC or U disk Main USB Interface Connect U disk by the side USB interface Status indicator light LED Indicator Power indicator light Charging indicator light Audio Output IIS interface, can play MP3, has a earphone, or a speaker output High Precision Time Philips clock chip ON/OFF key SW1 Control handset by On/Off key Reset Key SW2 System reset Power Parameters
All copyrights are reserved ­ 9 ­ Handset Hardware Operation Ver1.0 Power Adapter Input: 100­240V~50/60Hz 0.5A Max Output: 5V, 2A Power Rechargeable 4000mA lithium battery Boot Static Power 200mA 3.7V Test condition 3.7V power by the battery Standby Current 23 mA 3.7V Test condition 3.7V power by the battery Shutdown Current Less than 60uA Charge Mode DC charge Power Voltage :DC5V+/­5%,current 2A, ripple < 50MV Charging Supply Charging Time 4 hours charging current 1000mA Work Hour 8­12 hours Standby Time 2­4 working days Dimension 245mm*8mm*46mm (length*width*height) Weight 250 g Work Temperature 0­50 degree Protection Level IP54
All copyrights are reserved ­ 10 ­ Handset Hardware Operation Ver1.0 All copyrights are reserved ­ 11 ­
Handset Hardware Operation Ver1.0 7. Communication Interface at the bottom Extension 15PIN
extensive interfaces Interface PIN number 15 PIN Status 1 5VIN input 2 5VIN input 3 GND 4 GND 5 USB0­ 6 USB0+ 7 USB1­ 8 USB1+ 9 5VOUT output 10 TXD0 TTL 11 RXD0 TTL 12 VCC_ USB0 13 RD+ 14 RD­ 15 TD­ 16 TD+ All copyrights are reserved Signal Function Charging power input ground USB Client USB Host input USB Host’s power supply terminal 200mA 5V TTL serial port USB Client load Current 300mA USB doesn’t charge the battery when supplying power, but can maintain the machine working Ethernet
­ 12 ­ 
Download PDF