FAN COIL TECHNICAL MANUAL

FAN COIL TECHNICAL MANUAL
TECHNICAL MANUAL
FAN COIL
FCX
ISO 9001 - Cert. n° 0128/4
IFCXTY
0806
6191101_00
Replace : 64560.41_01 / 0308
4
5
6
7
8
10
11
12
16
17
25
27
28
30
32
33
34
35
37
38
53
54
58
74
DECLARATION OF CONFORMITY
Carriage • Safety symbol
Important information
Description • Versions
Main components• Component description
Selection
System configuration
Technical data
Operating limits
Delivery cooling capacity
Heating power input (3R)
Heating power input ( (4R)
Potenza termica resa BV (1R)
Cooling power yield (direct expansion)
Hanging version available static pressure
Battery pressure drop
Fattori di correzione nel funzionamento with glycol water
Sound power and sound pressure
Sound power level delle versioni pensili canalizzate
Accessories
Unit installation • Electrical connections
Dimensions
Wiring diagram
Trouble shooting • Maintenance
REMARKS
Store the manuals in a dry location to avoid deterioration, as
they must be kept for at least 10 years for any future reference.
All the information in this manual must be carefully read and
understood. Pay particular attention to the operating standards
with “DANGER” or “WARNING” signals as failure to
comply with them can cause damage to the machine and/or
persons or objects.
If any malfunctions are not included in this manual, contact
the local After-sales Service immediately.
The apparatus must be installed in such a way that maintenance and/or repair operations are possible.
The apparatus's warranty does not in any case cover costs due
to automatic ladders, scaffolding or other lifting systems necessary for carrying out repairs under guarantee.
Normal wear of components and filter is not covered by the
warranty.
AERMEC S.p.A. declines all responsibility for any damage
whatsoever
caused by improper use of the machine, and a partial
or superficial acquaintance with the information contained in
this manual.
The number of pages in this manual is: 76.
3
Italiano
INDEX
FCX
AERMEC S.p.A.
I-37040 Bevilacqua (VR) Italia – Via Roma, 44
Tel. (+39) 0442 633111
Telefax (+39) 0442 93730 – (+39) 0442 93566
www.aermec.com - [email protected]
DICHIARAZIONE DI CONFORMITÀ
Noi, firmatari della presente, dichiariamo sotto la nostra esclusiva
responsabilità, che il prodotto:
VENTILCONVETTORE
serie FCX
al quale questa dichiarazione si riferisce è conforme alle seguenti norme
armonizzate:
- CEI EN 60335-2-40
- CEI EN 55014-1
- CEI EN 55014-2
- CEI EN 61000-6-1
- CEI EN 61000-6-3
soddisfando così i requisiti essenziali delle seguenti direttive:
- Direttiva LVD 2006/95/CE
- Direttiva compatibilità elettromagnetica 2004/108/CE
- Direttiva Macchine 98/37/CE
FCX APC CON ACCESSORI
E’ fatto divieto di mettere in servizio il prodotto dotato di accessori
non di fornitura Aermec.
CERTIFICAT DE CONFORMITÉ
Nous soussignés déclarons sous notre exclusive responsabilité que le
produit:
VENTILO-CONVECTEURS
série FCX
auquel cette déclaration fait référence, est conforme aux normes
harmonisées suivantes:
- EN 60335-2-40
- EN 55014-1
- EN 55014-2
- EN 61000-6-1
- EN 61000-6-3
satisfaisant ainsi aux conditions essentielles des directives suivantes:
- Directive LVD 2006/95/CE
- Directive compatibilité électromagnétique 2004/108/CE
- Directive Machines 98/37/CE
FCX APC PLUS ACCESSOIRES
Il est interdit de faire fonctionner l'appareil avec des accessoires qui ne
sont pas fournis de Aermec.
CONFORMITY DECLARATION
We the undersigned declare, under our own exclusive responsibility,
that the product:
FAN COIL
FCX series
to which this declaration refers, complies with the following standardised
regulations:
- EN 60335-2-40
- EN 55014-1
- EN 55014-2
- EN 61000-6-1
- EN 61000-6-3
thus meeting the essential requisites of the following directives:
- Directive LVD 2006/95/CE
- EMC Electromagnetic Compatibility Directive 2004/108/CE
- Machine Directive 98/37/CE
FCX APC WITH ACCESSORIES
It is not allowed to use the unit equipped with accessories not supplied
by Aermec.
KONFORMITÄTSERKLÄRUNG
Wir, die hier Unterzeichnenden, erklären auf unsere ausschließlich
Verantwortung, dass das Produkt:
GEBLÄSEKONVEKTOR
der Serie FCX
auf das sich diese Erklärung bezieht, den folgenden harmonisierten
Normen entspricht:
- EN 60335-2-40
- EN 55014-1
- EN 55014-2
- EN 61000-6-1
- EN 61000-6-3
womit die grundlegenden Anforderungen folgender Richtlinien erfüllt
werden:
- Richtlinie LVD 2006/95/CE
- Richtlinie zur elektromagnetischen Verträglichkeit 2004/108/CE
- Maschinenrichtlinie 98/37/CE
FCX APC + ZUBEHÖR
Falls das Gerät mit Zubehörteilen ausgerüstet wird, die nicht von
Aermec geliefert werden, ist dessen Inbetriebnahme solange untersagt.
DECLARACIÓN DE CONFORMIDAD
Los que suscriben la presente declaran bajo la propia y exclusiva
responsabilidad que el conjunto en objeto, definido como sigue:
FAN COIL
serie FCX
al que esta declaración se refiere, está en conformidad a las siguientes
normas armonizadas:
- EN 60335-2-40
- EN 55014-1
- EN 55014-2
- EN 61000-6-1
- EN 61000-6-3
al que esta declaración se refiere, está en conformidad a las siguientes
normas armonizadas:
- Directiva LVD 2006/95/CE
- Directiva compatibilidad electromagnétic 2004/108/CE
- Directiva máquinas 98/37/CE
FCX APC CON ACCESORIOS
Está prohibido poner en marcha el producto con accesorios
no suministrados por Aermec.
Bevilacqua, 30/05/2008
4
La Direzione Commerciale – Sales and Marketing Director
Luigi Zucchi
Sovrapponibilità: controllare sull’imballo la posizione della freccia per
conoscere il numero di macchine impilabili.
Stacking: control the packing for the arrow position to know the number of machines that can be stacked.
Empilement: vérifier sur l’emballage la position de la flèche pour connaître le nombre d’appareils pouvant être empilés.
Stapelung: Anhand der Position des Pfeiles an der Verpackung kontrollieren, wieviele Geräte stapelbar sind.
Apilamiento: observe en el embalaje la posición de la flecha para saber
cuántos equipos pueden apilarse.
English
NON calpestare • Do NOT trample
NE PAS marcher sur cet emballage • Nicht betreten
NO pisar
5
NON lasciare gli imballi sciolti durante il trasporto.
Do NOT leave loose packages during transport.
ATTACHER les emballages pendant le transport.
Die Verpackungen nicht ungesichert transportieren.
NO lleve las cajas sueltas durante el transporte.
35Kg
Deutsche
NON trasportare la macchina da soli se il suo peso supera i 35 Kg.
DO NOT handle the machine alone if its weight is over 35 Kg.
NE PAS transporter tout seul l’appareil si son poids dépasse 35 Kg.
Das Gerät NICHT alleine tragen, wenn sein Gewicht 35 Kg überschreitet.
NO maneje los equipos en solitario si pesan más de 35 kg.
Français
NON bagnare • Do NOT wet
CRAINT l’humidité • Vor Nässe schützen
NO mojar
Italiano
TRASPORTO • CARRIAGE • TRANSPORT • TRANSPORT • TRANSPORTE
Pericolo:
Tensione
Pericolo:
Organi in movimento
Pericolo!!!
Danger:
Power supply
Danger:
Movings parts
Danger!!!
Danger:
Tension
Danger:
Organes en mouvement
Danger!!!
Gefahr !
Spannung
Gefahr !
Rotierende Teile
Gefahr!!!
Peligro:
Tensión
Peligro:
Elementos en movimiento
Peligro!!!
Español
SIMBOLI DI SICUREZZA • SAFETY SYMBOL • SIMBOLES DE SECURITE
SICHERHEITSSYMBOLE • SÍMBOLOS DE SEGURIDAD
5
English
IMPORTANT MAINTENANCE INFORMATION
WARNING: The fancoil is connected to
the power supply and a water circuit.
Operations performed by persons
without
the required technical skills can lead
to personal injury to the operator or
damage to the unit and surrounding
objects.
DANGER: never switch the appliance on
without having re/mounted the fan coil
casing.
The ultra-violet radiation emitted
from the bulbs inside is dangerous and
can cause conjunctivitis, burns and
dermatitis.
The device has safety micro switches
that prevent functioning if the casing
and filter are missing.
DANGER: do not tamper with the micro
switches as this would make functioning
of the fan coil unsafe..
FUNCTIONING ANOMALIES
In the case of functioning anomalies,
remove the voltage from the unit
and then re-apply it and re-start the
appliance. If the problem persists, call
the area after-sales service immediately.
ONLY POWER THE FAN COIL USING
230 VOLT, SINGLE-PHASE, 50 Hz
The fan coil may undergo permanent
damage if different electric power
supplies are used.
DO NOT PULL THE ELECTRIC CABLE
It is very dangerous to pull, step on,
crush or fix the electric power supply
cable using nails or staples.
The damaged cable can cause short
circuits and injury to persons.
DO NOT INTRODUCE OBJECTS INTO
AIR VENTS
Do not introduce any type of object into
the air outlet slots.
6
This could cause injury to persons or
damage the fan.
N E V E R U S E T H E FA N C O I L F O R
APPLICATIONS FOR WHICH IT WAS
NOT DESIGNED
Do not use the fancoil in husbandry
applications (e.g. incubation).
AIR THE ROOM
Periodically air the room in which
the fancoil has been installed; this is
particularly important if the room is
occupied by many people, or if gas
appliances or sources of odours are
present.
C O R R E C T LY
ADJUST
THE
TEMPERATURE
Room temperature should be regulated
to ensure maximum comfort to persons
present, particularly in the case of the
elderly, infants and invalids. Prevent
temperature fluctuations between
indoors and outdoors greater than 7 °C
during summer.
Note that very low temperatures during
summer will lead to greater electricity
consumption.
ORIENT AIR FLOW CORRECTLY
Air delivered by the fancoil should
not be oriented directly at people;
even if air temperature is greater than
room temperature, it can cause a cold
sensation and consequently discomfort.
DO NOT USE HOT WATER
When cleaning the indoor unit, use rags
or soft sponges soaked in warm water
(no higher than 40°C).
Do not use chemical products or solvents to clean any part of the fancoil.
Do not splash water on interior or exterior surfaces of the fancoil; danger of
short circuit.).
PERIODICALLY CLEAN THE FILTER
Frequent cleaning of the filter will ensure
more efficient unit operation.
Check whether the filter requires cleaning; if it is particularly dirty, clean it
more often.
Clean the filter frequently. Use a vacuum
cleaner to remove built up dust.
After cleaning and drying the filter, fit it
on the fancoil by following the removal
procedure in reverse order.
The normal wear of the germicidal lamp
and of the filter are not covered by warranty.
SPECIAL CLEANING
The removable drip tray and fan volute
ensure thorough cleaning of the unit (by
specifically trained personnel), essential for installations in venues subject to
crowding or in those with special hygiene requirements.
IT IS NORMAL
During cooling, water vapour may be
present in the air delivery of the fan coil.
In the heating function it might be
possible to hear a slight hiss around the
fan coil. Sometimes the fan coil might
give off unpleasant smells due to the
accumulation of dirt in the air of the
environment (especially if the room is
not ventilated regularly, clean the filter
more often).
During the operation, there could be
noises and creaks inside the device, due
to the various heat expansions of the
elements (plastic and metallic), but this
does not indicate any malfunctioning
and does not cause damage to the
unit unless the maximum input water
temperature is exceeded.
FCX - - FAN COIL
Congratulations on your purchase of the Aermec FCX fan coil.
Made with materials of superior quality in strict compliance with safety regulations, the "FCX " is easy to use and
will have a long life.
used in summer as an air conditioner if
the heating system has a water chiller..
The removable drip tray and fan
volute ensure thoroug cleaning of the
unit essential for installations in venues
subject to crowding or in those with
special hygiene requirements.
The quietness of the new centrifugal fan
assembly is such that at normal speed of
use you cannot hear when the FCX cuts
in.
The FCX fan coil has been designed to
meet all system requirements thanks to
its extensive range of accessories.
The AERMEC fan coil versions without
control panels can be combined to an
AERDOMUS central control unit.
Full respect for accident prevention
regulations
English
The fan coil units treat room air during
summer and winter seaqsons.
Th e F C X f a n c o i l c o n c e n t ra t e s
high technological and functional
characteristics that make it the ideal
climate control unit for all types of
rooms. The supply of climate controlled
air is immediate and distributed
throughout the room;; FCX generates
heat if included in a heating system with
boiler or heat pump but may also be
VERSION
SIZES AVAILABLE
The FCX fan coil series are avaailable in
with 3 row coil
9 versions for 8 sizes
FCX 17 (*)
FCX 62
FCX 22
FCX 82
FCX 32
FCX 102 (**)
FCX 42
FCX 50
with 4-row coil battery
2 version P and PO for 6 sizes
FCX 24
FCX 34
FCX 44
FCX 54
FCX 64
FCX 84
(*) FCX 17 not available in UE, PE and PO versions .
(**) FCX 102 not available in PO versions .
FCX A - AS - ACB - ACT - APC
ZX
FCX 17 ÷ 50 U - UE
FCX 62 ÷ 102 U - UE
FCX P - PPC
- PO - PE
FCX_A: with selector and a 3 speed fan unit, free standing for vertical installation coated
with anti rust polyester, colour RAL 9002. The delivery grill and the skirting for floor standing
installations (accessory ZX) are made of plastic and are colour RAL 7044.
FCX_AS: without control panels and with a 3 speed fan unit, free standing for vertical
installation coated with anti rust polyester, colour RAL 9002. The delivery grill and the skirting
for floor standing installations (accessory ZX) are made of plastic and are colour RAL 7044. An
external control panel is necessary (accessory).
FCX_ACB: with an electronic thermostat and a 3 speed fan unit free standing for vertical
installation coated with anti rust polyester, colour RAL 9002. The delivery grill and the skirting for
floor standing installations (accessory ZX) are made of plastic and are colour RAL 7044.
FCX_ACT: with an electronic multifinction thermostat and a 3 speed fan unit, free standing
for vertical installation coated with anti rust polyester, colour RAL 9002. The delivery grill and
the skirting for floor standing installations (accessory ZX) are made of plastic and are colour RAL
7044.
FCX_APC: with a PLASMACLUSTER ionizing filter, with an electronic multifinction thermostat
and a 3 speed fan unit free standing for vertical installation coated with anti rust polyester, colour
RAL 9002. The delivery grill and the skirting for floor standing installations (accessory ZX) are
made of plastic and are colour RAL 7044..
FCX_U: without control panels and with a 3 speed fan unit, free standing for vertical installation
coated with anti rust polyester, colour RAL 9002. The delivery grill and the skirting for floor
standing installations (accessory ZX) are made of plastic and are colour RAL 7044. An external
control panel is necessary (accessory)..
FCX_UE: with direct expansion coil, without control panels and with a 3 speed fan unit, free
standing for vertical installation coated with anti rust polyester, colour RAL 9002. The delivery grill
and the skirting for floor standing installations (accessory ZX) are made of plastic and are colour
RAL 7044. An external control panel is necessary (accessory).
FCX_P: version in galvanised steel without cabinet, without control panels and with a 3 speed
fan unit, for horizontal and vertical wall installation. An external control panel is necessary
(accessory).
FCX_PE: with direct expansion coil, version in galvanised steel without cabinet, without control
panels and with a 3 speed fan unit, for horizontal and vertical wall installation. An external
control panel is necessary (accessory).
FCX_PPC: with a PLASMACLUSTER ionizing filter, version in galvanised steel without cabinet,
without control panels and with a 3 speed fan unit, for horizontal and vertical wall installation.
An external PXAE control panel is necessary (accessory).
FCX_PO: version in galvanised steel without cabinet, without control panels and with a 7
speed fan unit, for horizontal and vertical wall installation. An external control panel is necessary
(accessory).
7
COMPONENTI PRINCIPALI
1
2
3
4
5
6 Fan
7 Main Frame
8 Condensate pump
9 Hydraulic connections
10 Head with adjustable fins (RAL7044)
Control panel (accessory)
Thermic exchange coil
Air Filter
Cover cabinet (RAL9002)
Fan motor
1
10
FCX 42 U
2
English
3
4
5
6
9
8
7
DESCRIPTION OF COMPONENTS
CONTROL PANEL
The control panel is located under the
grill positioined at the right of the fan
coil.In A, AS, ACB, ACT, APC and U
(62U, 82U e 102U) versions, the panel
can be protected from tampering by
using a screw to block the cover door.
In the AS and U versions, the controls
panel (accessory) can be installed on the
fan coil or on the wall.
In versions P, PO and PE, the controls
panel (accessory) can be installed only
on the wall.
The AERMEC fan coil versions without
control panels can be combined to a
HSH AERDOMUS central control unit
with or without connection cables.
Before selecting, consult the control
panels features.
FCX A
:
fan coil equipped with control panel for
use and selcting the fan speed.
WITH MANUAL SELECTORS
FCX ACT e APC
WITH ELECTRONIC
THERMOSTAT :
M U LT I F U N C T I O N
fan coils equipped with multifunction
electronic thermostat control panels,
the fan coils FCX ACT and FCX APC
are supplied ready for use with standard
configuration, but the installer can adapt
them the special requirements of the
system with the appropriate accessories
and personalising the functions by acting
on the internal Dip-Switch.
The controls are prompt but if valves are
presence they could delay.
8
System types
The FCX-ACT fan coils have been
designed for systems with 2 pipes, in the
following versions:
- without valve;
- with water valve (VCF);
- with electrical resistance (RX);
- with electrical resistance (RX) and valve
(VCF);
- with hot water battery (BV) and 2 valves
(VCF).
FCX APC : fancoils with
PLASMACLUSTER designed for 2-pipes
plant, in the following models:
- without valve;
- with water valve (VCF);
Ventilation
Th e t h r e e - s p e e d ve n t i l a t i o n c a n
be controlled either manually or
automatically.
For systems with valve and Water Probe
installation upstream of the valve there
may be a delay (delayed ventilation up
to 2’40” max) between the valve start-up
and the fan activation (exchanger preheating).
- manually with the selector in V1, V2 e
V3 position (the fan coil is used with on
off cycles on selected speed);
- automatically with the selector
in AUTO position (the fan speed is
controlled by the thermostat according
to the room temperature)
Change over
The thermostat automatically changes
over from Heating/cooling mode.
Change over is based on the water
temperature detected in the system. It is
possible to choose between two change
over modes by changing the settings on
the DIP switch :
- only minimum/maximum temperature
control;
- with minimum/maximum temperature
control and the preheating of the coil
(fan delayed for a maximum of 2’40”).
Only systems with water probes
positioned downstream of the valve
or with a two way valve, change over
occurs on the air side by acting on
the temperature selector; this setting
allows the fan coil to be used in
systems with two way valves but is not
advised because it reduces the use of
the electronic thermostat (the heating/
cooling modes displayed by the led
are altered depending on the selected
temperature and of the air temperature
in the environment.
Water temeperature controls
The
thermostat
enables
ventilatsolamenteon only if the water
temperature is suited to Hetaing or
Cooling mode.
The enabling threshold is 35°C or
39°C for Heating and 17°C or 22°C for
Cooling and can be configured by the
Dip-Switch.
The control panels signal the situation
when the water temperature is not
adequate to the function mode set by
means of the alternate flashing of the
pink C led with red or blue depending
on the relative active modes.
If a three way valve is inserted with a
water probe as per standard, it must be
replaced with the SW3 accessory in
which the bulb must be positioined on
FCX ACB
WITH SIMPLIFIED ELECTRONIC THERMOSTAT:
fan coil equipped with control panel
with electronic room thermostat for
controlling switch on and switch off of
the fan.
The control panel controls the function
of the fan coil in order to maintain the
set room temperature. It allows the
electronic adjustment of the temperature,
manual speed change on the fan,manual
function selection in Heating or Cooling
mode (manual change over).
The room probe temperature is located
bext to the “AERMEC” plate.
It is not possible to couple the thermostat
with a water temperature probe.
If the power supply is cut, the fan coils
restarts resetting the previous modes set
The controls are prompt if the room
temperature allows it. Water temperature
control of the system is not foreseen
Type of system
The fan coil series FCX ACB are designed
for two pipe systems :
- without valve;
- with water valve (VCF);
Ventilation
The 3 speed fan is manually controlles
with a selector positioned in V1, V2 and
V3 (the fan is used with on off cycles on
the speed selected).
Change over
Change over is manual, the user selects
the function mode (Heating or Cooling)
by acting on the selector of the controls
panel.
Valve control
The valve (accessory) opens or closes in
correspondance with the switching on
and switching off of the fan .
and with a door for accessing the control
panel.
Version U, UE : are inserted with
adjustable grills on the top in thermo
plastic material for the diffusion of air
and with a door for accessing the control
panel. With the adjustable grill closed,
intervening on the micro switch stops the
fan, interrupting any heat change with
the room. The cabinet has a front grill in
thermoplastic material for air intake. .
HEAT EXCHANGE COIL
Made from thick galvanised steel The
rear has holes for fitting the appliance
to the wall For wall panels, a panel for
closing the fan group is provided. Each
appliance is supplied with a condensate
drain tray
Coil with copper pipe and finned
in blocked aluminium by means of
mechanical expansion pipes The
collectors are attached with female
connectors and air relief at the top of
the coil.
FILTER SECTION
Easily removable and built with
regenerised materialsand can be cleaned
by washing
Versions P and PO filters with filtration
class G2.
CABINET CASE
Colour RAL9002
Delivery and Intake grill colour
RAL7044
The steel case is treated and coated with
powered polyester to guarantee high rust
resistance and corrosion.
Versions A, AS, ACT, APC, ACB : are
inserted with grills on the top in thermo
plastic material for the diffusion of air
ELECTRO FAN UNIT
It is made up of double inlet centrifugal
fans with blades along its length for
obtaining a high capacity with a low
number of revs. The electric motor
protects from over loads, it is three speed
with condenser always inserted, directly
coupled with the fans and with elastic
supports. The FCX PO versions have 7
speed motors. (3 selections) .
SUPPORT STRUCTURE
CONDENSATE DRAIN
Each appliance is supplied with a
condensate drain tray connected to the
condensate outlet produced from the
unit id cooling mode.
HYDRAULIC CONNECTIONSI
The connections, positioned on the
left side have female attachments. It is
possible to rotate the coil.
PACKING
The units are shipped in cardboard box
standard packing and polystirene shells.
9
English
the delivery pipe upstream of the valve.
Valve control
The valve can be controlled in two
ways::
- optimised: uses the fan coil capacity
in Heatingto produce heat even with
ventilation off and in Cooling for a
continuous ventilation controlling the
room temperature by means of a valve;
- normal: the valve opens and closes in
correspondance with the switch on and
switch off of the fan coil.
Emergency mode
In case of probe troubleshooting SA, the
thermostat enters in emergency mode,
indicated by a flashing led (D) yellow. In
this condition the thermostat behaves as
follows::
- with selector (A) in OFF position the
water valave is closed and the fan is off.
- with selector (A) in AUTO position,
V1, V2 and V3 the water valve is always
open and the fan performs on off cycles;
in this situation, the power provided by
the terminal is manually controlled by
selcetor (B): turning towards the right
the duration of the On cycle increases;
turningn towards the left it reduces.
English
CRITERIA OF CHOICE
The versions with high cabinet (A, AS,
ACB, ACT and APC) have intake from
below and can be used for vertical wallhung or floor installation using the relevant skirting (accessory ZX). The accessory SE (external air damper) where
requested, also allows, to change the
environment air.
The versions with universal cabinet (U
and UE) have front intake and can be
vertically wall-hung or installed horizontally on the ceiling.
The suspended versions (P, PPC, PO and
PE), without cover cabinets and intake
from below, are suitable for vertical or
horizontal installation.
In the case of ducted installations where
the loss of load of the channel is relevant, the PO version (with multi-speed
enhanced motor) allows to obtain the
static pressure necessary to guarantee a
correct air flow rate.
The PO version is available with coils
with 3 and 4 rows.
The AS, U, UE versions require coupling
with a control panel to be applied inside or outside, consult the features and
the compatibility of the control panels
supplied as accessories.
The P, PE and PO require coupling with
a control panel to be applied outside,
consult the features and the compatibility of the control panels supplied as
accessories.
The PPC version must be coupled to
panel PXA E.
The other versions of fan coil are supplied with incorporated control panel.
Some control panels can control a network of fan coils if they are combined
with the SIT3 and SIT5 interface board
supplied as an accessory.
In the versions without control
panels, the AERMEC fan coils can all
be coupled to the centralised HSH
AERDOMUS control system with wired
or wireless connection.
The main technical data of the FCX are
summarised in the tables.
10
The sensitive and total cooling capacity at maximum speed depending on
the temperature of the inlet water, its
heat drop and the dry and wet bulb
temperatures of the air respectively for
sensitive capacity and total capacity for
the versions with coils with 3 rows are
stated in the table. The efficiency at average and minimum speed is obtained by
multiplying the table values by the corrective factors indicate. For the versions
with 4 rows, they are obtained by multiplying the table values by the corrective
factors indicated for every speed.
The water side pressure drop for the
coils with 3, 1 and 4 rows is respectively stated in the graphics.
The correction factors in functioning
with glycoled water in cooling mode
and in heating mode are stated in the
graphics per percentages of glycol of
10%, 20% and 35%.
The heating capacity of the coils with 3,
4 and 1 row (accessory BV) depending
on the water flow rate and the temperature difference between inlet water
and inlet air is stated in a graphical
form and is referred at maximum speed.
Performance at average and minimum
speed is obtained by multiplying the
values obtained from the graphics at
maximum speed by the indicated corrective factors.
The sensitive and total cooling capacities of the direct expansion coils (FCX
PE) depending on the evaporation temperature and the dry and wet bulb temperatures of the air entering are stated in
the graphical form respectively for total
and sensitive capacity and are stated at
maximum speed. Performance at average and minimum speed is obtained
by multiplying the values obtained from
the graphics at maximum speed by the
indicated corrective factors.
For the ducted, suspended versions
(P-PE-PO) the performance stated above
must be intended as referring to air flow
rates equal to those of corresponding
models of other versions (A-U) at maximum speed (nominal flow rate).
The head of the suspended versions,
depending on the air flow rate and fan
speed, are stated in table form. The curves are indicated for every speed.
For dimensioning of the ducted, suspended versions, it is recommended to proceed as follows: select the size which,
in nominal flow rate conditions, have
immediate power that is higher than
that requested; trace the curve of the
channel pressure drop on the flow ratestatic pressure diagram relative to the
machine in question, thus identify the
functioning points of the machine at
the different speeds. On the basis of the
flow rate values corresponding to the
above-mentioned points, the corrective
factors are finally obtained that allow to
calculate the power yielded in real air
flow conditions. The above-mentioned
procedure allows, in the case of multispeed versions, to appropriately choose
the speed to be set.
The sound power and sound pressure level of the fan coils at the various
speeds is stated in separate tables for
the versions with 3 rows and versions
with 4 rows. For ducted, suspended versions, the sound power level is expressed depending on the air flow rate and
static pressure and is represented using
graphics.
A wide range of accessories is available for FCX series fan coils, sometimes some of them cannot be used at
the same time. The compatibility of the
accessories with the selected fan coil
must be checked. The manual contains
the description, drawing and compatibility of each accessory.
The information regarding installation
is inserted in the manual supplied with
every fan coil and every accessory. This
manual is limited to general information
in order to perform correct installation.
There are also drawings with dimensions of the fan coils and wiring diagrams with connections to the control
panels.
FCX UNIT LAY-OUT
Reading Key:
Water temperature probe
Solenoid valve (Heating / Cooling)
Solenoid valve (Heating),
Solenoid valve (Cooling)
SA
V3,V2,V1
RX
PC
Ambient temperature probe
Maximum, Average, Minimum Fan Coil speed.
Resistance
Plasmacluster
2-pipe unit with water probe
AIR
SA
AIR
SW
SA
VCF SW
SA
SW
RX
SA
PC
RX
BV
SA
VCF SW
VC/VF
SW
VC
SW
SA
RX
SA
BV
VC
VF SW
SA
VCF
VCF SW
SA
SA
VCF
AIR
AIR
SA
220V
PC
SA
VCF
PC
AIR
AIR
SA
RX
RX
VCF
VCF
AIR
SA
RX
VCF
4-pipe unit without water probe
SW
BV
VCF
220V
PC
AIR
AIR
SA
AIR
AIR
AIR
AIR
VF
SA
220V
PC
4-pipe unit with water probe
AIR
SA
VCF
220V
AIR
SW
SW
SA
SW
AIR
AIR
220V
AIR
SA
SA
AIR
220V
PC
AIR
AIR
AIR
SA
2-pipe unit without water probe
SA
BV
VC
AIR
VF
SA
BV
VC
VF
AIR
SA
BV
11
English
SW
VCF
VC
VF
TECHNICAL DATA
FCX A-AS-ACT-APC-ACB-U-P with 3-row coil
FCX 17
FCX 22
FCX 32
FCX 42
FCX 50
FCX 62
FCX 82 FCX 102
W (max.)
W (med.)
W (min.)
2490
2070
1610
3400
2700
1915
4975
4085
3380
7400
6415
5115
8620
7530
5420
12920
10940
8330
15140
13350
10770
17020
15240
12560
W (E)
1360
2100
3160
4240
4900
6460
7990
9670
W
l/h
kPa
700
214
2,8
950
292
6,3
1300
427
14,2
1650
636
14,1
1950
741
14,2
2200
1110
14,8
2200
1300
19,8
2200
1464
16,6
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
1000
890
720
830
710
540
172
2,6
1500
1330
1055
1240
1055
755
258
5,8
2210
2055
1570
1750
1540
1100
380
16,6
3400
2800
2310
2760
2115
1635
585
14,3
4190
3640
2840
3000
2750
2040
721
19,3
4860
4660
3950
3980
3510
2825
836
11,6
7420
5500
4710
5680
4250
3450
1276
13,5
7620
7140
6270
5980
4984
4263
1311
19,2
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
W (E)
A
200
160
110
1
36,5
29,5
22,5
45
38
31
0,58
35
0,16
290
220
140
1
41,5
34,5
22,5
50
43
31
0,79
25
0,12
450
350
260
2
39,5
32,5
25,5
48
41
34
1,11
44
0,21
600
460
330
2
42,5
35,5
28,5
51
44
37
1,48
57
0,28
720
600
400
2
47,5
42,5
33,5
56
51
42
1,48
67
0,35
920
720
520
3
48,5
42,5
33,5
57
51
42
2,52
82
0,40
1140
930
700
3
53,5
48,5
41,5
62
57
50
2,52
106
0,49
1300
1120
900
3
57,5
52,5
47,5
66
61
56
2,52
131
0,58
W
735
975
1344
1707
2017
2282
2306
2331
A
3,2
4,25
5,86
7,45
8,83
9,97
10,06
10,15
ø
ø
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
Mod.
Heating
Heating capacity
English
Heating capacity*
(water inlet 50°C)
Heating capacity (accessory RX)
Water flow rate
Water pressure drop
Cooling
Total cooling capacity
Sensible cooling capacity
Water flow rate
Water pressure drop
Air flow rate
Fans
Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Max. motor power
with electric heater
Input current
with electric heater
Coil connections 3R
Coil connections 1R
Power supply = 230V ~ 50Hz
Performance values refer to the following conditions:
Sound pressure measured in an 85 m 3 semi-reverberant test
chamber with reverberation time Tr = 0.5s.
Cooling:
- room air temperature 27 °C B.S., 19 °C B.U.;
• maximum speed:
- water inlet temperature 7 °C; ∆t water 5 °C.
• medium and low speed:
- water inlet temperature 7 °C;
- water flow rate remains same as at maximum speed.
12
(E) = EUROVENT certified performance
Heating:
room air temperature 20 °C B.S.;
• maximum speed:
- water inlet temperature 70 °C; ∆t water 10 °C;
• medium and low speed:
- water inlet temperature 70 °C;
- water flow rate remains same as at maximum speed.
• maximum speed (water inlet 50°C):
- water inlet temperature 50 °C;
- water flow rate same as in cooling operation.
TECHNICAL DATA
FCX 22
FCX 32
FCX 42
FCX 50
FCX 62
FCX 82
W (max.)
W (med.)
W (min.)
3400
2700
1915
4975
4085
3380
7400
6415
5115
8620
7530
5420
12920
10940
8330
15140
13350
10770
W (E)
2100
3160
4240
4900
6460
7990
W
l/h
kPa
950
292
6,3
1300
427
14,2
1650
636
14,1
1950
741
14,2
2200
1110
14,8
2200
1300
19,8
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
1500
1330
1055
1240
1055
755
258
5,8
2210
2055
1570
1750
1540
1100
380
16,6
3400
2800
2310
2760
2115
1635
585
14,3
4190
3640
2840
3000
2750
2040
721
19,3
4860
4660
3950
3980
3510
2825
836
11,6
7420
5500
4710
5680
4250
3450
1276
13,5
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
W
A
290
220
140
1
41,5
34,5
22,5
50
43
31
0,79
54
0,25
450
350
260
2
39,5
32,5
25,5
48
41
34
1,11
97
0,45
600
460
330
2
42,5
35,5
28,5
51
44
37
1,48
111
0,51
720
600
400
2
47,5
42,5
33,5
56
51
42
1,48
82
0,36
920
720
520
3
48,5
42,5
33,5
57
51
42
2,52
97
0,48
1140
930
700
3
53,5
48,5
41,5
62
57
50
2,52
135
0,62
W
1004
1397
1761
2032
2297
2335
A
4,38
6,00
7,68
8,84
10,05
10,19
ø
ø
1/2”
1/2”
1/2”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
Mod.
Heating
Heating capacity
Heating capacity*
(water inlet 50°C)
Heating capacity (accessory RX)
Water flow rate
Water pressure drop
Cooling
Total cooling capacity
Sensible cooling capacity
Water flow rate
Water pressure drop
Air flow rate
Fans
Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Max. motor power
with electric heater
Input current
with electric heater
Coil connections 3R
Coil connections 1R
Power supply = 230V ~ 50Hz
Performance values refer to the following conditions:
Sound pressure measured in an 85 m3 semi-reverberant test chamber
with reverberation time Tr = 0.5s.
Cooling:
- room air temperature 27 °C B.S., 19 °C B.U.;
• maximum speed:
- water inlet temperature 7 °C; t water 5 °C.
• medium and low speed:
- water inlet temperature 7 °C;
- water flow rate remains same as at maximum speed.
English
FCX PO with 3-row coil
(E) = EUROVENT certified performance
Heating:
room air temperature 20 °C B.S.;
• maximum speed:
- water inlet temperature 70 °C; t water 10 °C;
• medium and low speed:
- water inlet temperature 70 °C;
- water flow rate remains same as at maximum speed.
• maximum speed (water inlet 50°C):
- water inlet temperature 50 °C;
- water flow rate same as in cooling operation.
13
TECHNICAL DATA
FCX P with 4-row coil
FCX 24
FCX 34
FCX 44
FCX 54
FCX 64
FCX 84
W (max.)
W (med.)
W (min.)
3950
3200
2200
5850
4850
3850
8600
6930
5200
10100
8760
6240
14300
11500
8500
17100
14420
11200
W (E)
2320
3550
5250
6100
7810
10400
l/h
kPa
340
4
503
8
740
21
869
22
1230
22
1471
30
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
1730
1500
1150
1380
1140
828
297
3
2800
2450
2050
2130
1789
1441
482
9
4450
3780
2970
3300
2722
2079
765
19,2
4970
4770
3620
3540
3101
2281
855
25,9
6350
5520
4500
5030
4195
3330
1092
13
8600
7600
6270
5780
5016
4013
1479
22
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
W (E)
A
ø
290
220
140
1
42,5
37,5
26,5
51
46
35
1
33
0,25
3/4”
450
350
260
2
39,5
32,5
27,5
48
41
36
1,5
44
0,45
3/4”
600
460
330
2
46,5
41,5
32,5
55
50
41
1,9
57
0,51
3/4”
720
600
400
2
47,5
44,5
35,5
56
53
44
1,9
67
0,36
3/4”
920
720
520
3
48,5
42,5
35,5
57
51
44
3,4
91
0,48
3/4”
1140
930
700
3
52,5
48,5
42,5
61
57
51
3,4
106
0,62
3/4”
Mod.
Heating
Heating capacity
English
Heating capacity*
(water inlet 50°C)
Water flow rate
Water pressure drop
Cooling
Total cooling capacity
Sensible cooling capacity
Water flow rate
Water pressure drop
Air flow rate
Fans
Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Coil connections 4R
Power supply = 230V ~ 50Hz
Performance values refer to the following conditions:
Sound pressure measured in an 85 m 3 semi-reverberant test
chamber with reverberation time Tr = 0.5s.
Cooling:
- room air temperature 27 °C B.S., 19 °C B.U.;
• maximum speed:
- water inlet temperature 7 °C; ∆t water 5 °C.
• medium and low speed:
- water inlet temperature 7 °C;
- water flow rate remains same as at maximum speed.
14
(E) = EUROVENT certified performance
Heating:
room air temperature 20 °C B.S.;
• maximum speed:
- water inlet temperature 70 °C; ∆t water 10 °C;
• medium and low speed:
- water inlet temperature 70 °C;
- water flow rate remains same as at maximum speed.
• maximum speed (water inlet 50°C):
- water inlet temperature 50 °C;
- water flow rate same as in cooling operation.
TECHNICAL DATA
FCX 24
FCX 34
FCX 44
FCX 54
FCX 64
FCX 84
W (max.)
W (med.)
W (min.)
3950
3200
2200
5850
4850
3850
8600
6930
5200
10100
8760
6240
14300
11500
8500
17100
14420
11200
W (E)
2320
3550
5250
6100
7810
10400
l/h
kPa
340
4
503
8
740
21
869
22
1230
22
1471
30
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
1730
1500
1150
1380
1140
828
297
3
2800
2450
2050
2130
1789
1441
482
9
4450
3780
2970
3300
2722
2079
765
19,2
4970
4770
3620
3540
3101
2281
855
25,9
6350
5520
4500
5030
4195
3330
1092
13
8600
7600
6270
5780
5016
4013
1479
22
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (max.)
l
W (E)
A
ø
290
220
140
1
49,5
58
1
54
0,25
3/4”
450
350
260
2
44
52,5
1,5
97
0,45
3/4”
600
460
330
2
50
58,5
1,9
111
0,51
3/4”
720
600
400
2
50,5
59
1,9
82
0,36
3/4”
920
720
520
3
53,5
62
3,4
97
0,48
3/4”
1140
930
700
3
55,5
64
3,4
135
0,62
3/4”
Mod.
Heating
Heating capacity
Heating capacity*
(water inlet 50°C)
Water flow rate
Water pressure drop
Cooling
Total cooling capacity
Sensible cooling capacity
Water flow rate
Water pressure drop
Air flow rate
Fans
Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Coil connections 4R
Power supply = 230V ~ 50Hz
Performance values refer to the following conditions:
Sound pressure measured in an 85 m 3 semi-reverberant test
chamber with reverberation time Tr = 0.5s.
Cooling:
- room air temperature 27 °C B.S., 19 °C B.U.;
• maximum speed:
- water inlet temperature 7 °C; t water 5 °C.
• medium and low speed:
- water inlet temperature 7 °C;
- water flow rate remains same as at maximum speed.
English
FCX PO with 4-row coil
(E) = EUROVENT certified performance
Heating:
- room air temperature 20 °C B.S.;
• maximum speed:
- water inlet temperature 70 °C; t water 10 °C;
• medium and low speed:
- water inlet temperature 70 °C;
- water flow rate remains same as at maximum speed.
• maximum speed (water inlet 50°C):
- water inlet temperature 50 °C;
- water flow rate same as in cooling operation.
15
OPERATING LIMITS
Maximum water inlet temperature............................ 80 °C
Maximum working pressure ....................................... 8 bar
Operating Voltage ..............................230V(±10%) ~ 50Hz
Room Temperature ................................................. 0÷45°C
Room Humidity................................................. <85% U.R.
Water flow limits (3-row coil ):
English
MOD.
Minimum water flow
Maximum water flow
FCX
[l/h]
[l/h]
17
100
750
22
100
750
32
100
750
42
150
1100
50
150
1100
62
300
2200
82
300
2200
102
300
2200
17
50
400
22
50
400
32
50
400
42
50
400
50
50
400
62
100
900
82
100
900
102
100
900
24
150
1100
34
150
1100
44
150
1100
54
150
1100
64
300
2200
84
300
2200
Water flow limits (1-row coil):
MOD.
Minimum water flow
Maximum water flow
FCX
[l/h]
[l/h]
Water flow limits (4-row coil):
MOD.
Minimum water flow
Maximum water flow
FCX
[l/h]
[l/h]
Minimum average water temperature
To prevent the formation of condensation on the exterior of
the unit while the fan is operating, the average water
temperature should not drop beneath the limits shown in the
table below, determined by the thermo-hydrometric ambient
conditions.
These limits refer to unit operation with fan at minimum speed.
In case condensation is formed on the exterior of the unit
if cold water circulates through the coil while the fan is off
for prolonged periods of time, it is advisable to fit the
additional three-way valve.
Dry bulbe air temperature [°C]
MINIMUM AVERAGE WATER TEMPERATURE
Wet bulbe air temperature °C
16
15
17
19
21
23
21
3
3
3
6
-
23
3
3
3
5
8
25
3
3
3
4
7
27
3
3
3
3
6
29
3
3
3
3
5
31
3
3
3
3
5
COOLING CAPACITY
FCX 17
Water temp.
Inlet [°C]
5
6
7
8
9
10
11
12
13
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
∆t
15
17
19
21
23
21
23
25
27
29
31
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
884
750
699
–
–
777
674
627
–
–
671
602
–
–
–
597
551
–
–
–
539
500
–
–
–
481
–
–
–
–
429
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1246
1071
920
852
–
1109
934
823
768
–
964
825
736
–
–
845
718
660
–
–
727
635
593
–
–
630
575
–
–
–
572
525
–
–
–
514
473
–
–
–
456
–
–
–
–
1624
1472
1277
1105
1027
1495
1328
1141
991
927
1362
1171
2012
1866
1710
1525
1328
1882
1734
1572
1364
1191
1750
1595
1403
1209
1075
1615
1452
1252
1061
970
1472
1282
1098
941
878
1309
1118
955
843
–
1152
982
829
757
–
986
845
730
–
–
856
732
654
–
–
2428
2286
2137
1975
1803
2299
2157
2002
1833
1638
2167
2021
1859
1684
1466
2031
1879
1710
1505
1296
1889
1730
1555
1346
1146
1744
1578
1378
1177
1023
1591
1405
1205
1027
918
1432
1227
1045
891
826
1259
1071
904
795
–
723
652
615
583
548
654
595
562
530
498
589
544
512
480
447
532
493
461
429
395
477
443
411
378
345
425
392
360
326
292
374
342
310
275
238
324
292
258
222
182
273
240
206
167
120
857
768
718
685
652
786
711
666
635
601
727
652
615
580
548
658
595
562
530
497
594
544
512
479
446
536
493
461
429
395
479
443
410
378
344
425
392
360
326
292
374
341
309
275
238
996
907
820
781
747
923
840
768
731
699
858
780
716
683
649
796
717
667
634
600
728
654
614
579
548
662
594
561
530
497
598
543
510
479
446
541
492
461
428
395
483
442
410
377
343
1112
1044
956
877
835
1054
980
895
823
791
995
911
1226
1161
1093
1011
933
1170
1104
1029
945
879
1113
1046
966
879
832
1054
982
899
822
788
995
912
835
771
739
930
851
773
725
694
860
787
716
678
648
798
725
664
630
599
732
664
614
578
547
1337
1276
1211
1145
1068
1282
1220
1155
1086
1001
1226
1163
1096
1018
936
1168
1105
1038
954
878
1110
1046
969
891
827
1053
982
903
828
782
993
918
839
770
737
928
853
778
723
693
858
789
720
678
648
1000
891
837
1212
1036
875
807
–
1055
900
775
725
–
920
779
694
–
–
788
679
622
–
–
679
600
–
–
–
605
547
–
–
–
830
777
744
930
849
769
730
695
859
784
715
682
649
797
722
665
631
600
731
659
614
579
547
665
595
561
528
497
602
542
510
479
446
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 17
total capacity
1,00
Maximun speed
sensible capacity
1,00
total capacity
0,89
Medium speed
sensible capacity
0,86
total capacity
0,72
Minimum speed
sensible capacity
0,65
17
English
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
COOLING CAPACITY
FCX 22
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
Water temp.
Inlet [°C]
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
5
English
∆t
6
7
8
9
10
11
12
13
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
15
17
19
21
23
21
23
25
27
29
31
1238
1110
948
866
–
1085
963
837
779
–
948
841
750
707
–
837
748
683
–
–
750
671
616
–
–
683
593
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1731
1579
1372
1167
1049
1555
1387
1198
1015
946
1372
1207
1033
908
847
1198
1046
901
817
–
1033
907
783
738
–
901
796
713
–
–
782
716
646
–
–
713
637
–
–
–
646
–
–
–
–
2254
2090
1893
1677
1436
2086
1917
1701
1478
1247
1893
1719
–
2613
2440
2250
2028
2613
2440
2258
2063
1811
2440
2258
2072
1841
1597
2258
2072
1862
1625
1390
2072
1878
1640
1420
1198
1862
1652
1433
1222
1052
1640
1433
1238
1061
933
1433
1247
1073
918
840
1238
1058
921
806
–
–
3163
3003
2826
2631
–
2994
2826
2640
2436
–
2817
2640
2445
2232
–
2631
2449
2245
1997
–
2440
2250
2019
1762
2449
2241
2037
1780
1542
2250
2032
1795
1555
1329
2037
1801
1564
1350
1143
1795
1561
1350
1155
988
1065
973
864
814
768
980
875
786
742
698
885
783
719
673
627
794
701
649
603
558
714
625
580
534
487
633
554
510
464
415
551
486
441
393
342
467
416
370
322
266
392
346
299
246
181
1253
1162
1048
955
907
1164
1068
955
882
840
1066
977
869
814
766
983
891
786
742
696
890
793
717
673
627
799
711
648
603
558
719
629
579
534
487
638
554
510
464
415
556
485
440
393
342
1434
1350
1236
1124
1033
1352
1252
1143
1038
969
1262
1165
1056
953
905
1164
1073
971
882
839
1079
984
878
813
766
986
897
790
741
696
893
801
717
673
627
804
720
648
603
558
723
638
578
534
487
1590
1512
1430
1322
1207
1511
1432
1334
1229
1119
1432
1350
1743
1669
1594
1511
1407
1667
1591
1514
1422
1314
1589
1513
1432
1326
1223
1508
1430
1340
1235
1129
1429
1350
1250
1147
1047
1347
1260
1159
1062
968
1257
1167
1067
975
904
1162
1075
985
889
836
1078
989
896
812
764
1891
1823
1751
1673
1591
1814
1745
1672
1594
1510
1736
1666
1595
1513
1419
1662
1590
1514
1430
1327
1582
1511
1434
1337
1230
1505
1431
1345
1245
1143
1424
1349
1252
1151
1058
1343
1259
1161
1070
974
1253
1165
1070
983
902
1500
1280
1107
1701
1512
1311
1119
994
1527
1314
1137
966
889
1311
1134
977
858
–
1137
978
854
767
–
977
854
753
701
–
854
762
678
–
–
1240
1139
1036
1349
1260
1149
1049
967
1261
1166
1061
966
904
1163
1073
979
884
840
1078
986
888
812
764
988
901
799
741
696
896
809
720
671
627
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 22
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,89
Medium speed
sensible capacity
0,85
total capacity
0,70
Low speed
sensible capacity
0,61
18
FCX 24
1,15
1,11
1,00
0,92
0,77
0,67
COOLING CAPACITY
FCX 32
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
5
6
7
8
9
10
11
12
13
∆t
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
15
17
19
21
23
21
23
25
27
29
31
1303
1618
1415
1231
1064
1587
1407
1236
1056
960
1363
1205
1069
939
871
1174
1056
942
841
–
1042
952
843
–
–
942
847
–
–
–
839
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1866
2281
2026
1793
1556
2241
2013
1780
1552
1332
1989
1758
1552
1341
1152
1723
1523
1337
1161
1012
1475
1320
1152
1009
911
1264
1131
1014
900
–
1095
1007
909
–
–
992
904
–
–
–
891
–
–
–
–
2512
2921
2728
2502
2246
–
2693
2491
2219
1964
–
2456
3148
–
3419
3228
3010
–
–
3189
2984
2759
–
3138
2947
2733
2456
–
2895
2693
2448
2170
–
2649
2413
2158
1881
–
2386
2113
1864
1623
2320
2078
1832
1618
1398
2035
1793
1583
1390
1209
1739
1534
1352
1198
1042
–
–
–
3968
3770
–
–
3924
3732
3528
–
–
3681
3489
3272
–
–
3438
3228
2997
–
–
3182
2959
2693
–
3112
2914
2680
2378
–
2851
2636
2355
2078
–
2579
2316
2030
1789
–
2267
1995
1754
1534
1134
1351
1231
1088
997
1347
1230
1103
974
906
1219
1095
987
878
817
1084
990
878
785
727
981
881
764
695
635
875
774
663
622
542
769
661
574
512
448
661
546
483
419
347
552
452
391
321
238
1368
1604
1485
1360
1222
1593
1477
1366
1236
1104
1479
1355
1240
1114
997
1349
1233
1114
990
906
1221
1114
1001
881
817
1089
997
891
785
727
983
891
778
695
635
880
783
667
605
542
774
672
574
512
448
1612
1851
1750
1623
1493
1831
1733
1623
1494
1368
1726
1604
1488
1377
1248
1593
1476
1372
1255
1120
1477
1357
1248
1128
1003
1348
1240
1134
1008
906
1224
1109
1010
895
817
1091
1003
902
788
727
987
898
792
695
635
1817
2055
1973
1881
1753
2029
1954
1867
1755
1630
1928
1849
2004
2253
2176
2090
2001
2220
2153
2076
1989
1895
2120
2054
1973
1884
1759
2022
1950
1868
1755
1636
1921
1848
1752
1632
1261
1819
1743
1624
1513
1389
1716
1615
1503
1392
1274
1587
1491
1379
1274
1159
1472
1359
1260
1158
1033
2184
2438
2371
2292
2210
2409
2340
2272
2193
2106
2313
2246
2174
2090
2004
2212
2149
2072
1989
1896
2115
2046
1970
1882
1771
2013
1948
1864
1755
1638
1914
1844
1749
1634
1524
1813
1737
1622
1517
1405
1709
1610
1503
1394
1291
2210
1956
1705
2403
2193
1938
1710
1490
2162
1912
1688
1472
1275
1872
1653
1447
1271
1104
1600
1420
1258
1102
963
1363
1212
1087
971
–
1172
1063
971
–
–
1750
1630
1501
1827
1744
1625
1501
1382
1722
1616
1492
1386
1263
1591
1491
1376
1266
1145
1474
1359
1254
1148
1015
1349
1242
1141
1021
911
1210
1114
1019
911
817
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 32
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,86
Medium speed
sensible capacity
0,81
total capacity
0,65
Low speed
sensible capacity
0,58
FCX 34
1,17
1,12
1,02
0,94
0,85
0,76
19
English
Water temp.
Inlet [°C]
COOLING CAPACITY
FCX 42
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
Water temp.
Inlet [°C]
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
5
English
∆t
6
7
8
9
10
11
12
13
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
15
17
19
21
23
21
23
25
27
29
31
2871
2491
2156
1808
1602
2491
2166
1879
1563
1457
2146
1882
1621
1415
1321
1850
1647
1482
1279
–
1644
1482
1266
–
–
1482
1312
–
–
–
1320
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3516
3110
2717
2278
3497
3103
2730
2343
1924
3071
2742
2375
2014
1689
2704
2382
2040
1737
1518
2324
2033
1782
1515
1386
1995
1769
1563
1350
–
1727
1579
1392
–
–
1566
1412
–
–
–
1405
–
–
–
–
–
4551
4241
3825
3368
–
4194
3832
3426
2962
–
3825
–
–
5329
5010
4635
–
–
4963
4626
4204
–
4898
4579
4223
3471
–
4523
4185
3748
3297
–
4128
3741
3297
2846
–
3683
3284
2846
2446
3625
3245
2852
2465
2098
3149
2800
2433
2117
1789
2730
2375
2104
1824
1544
–
–
–
6191
5854
–
–
6126
5816
5460
–
–
5751
5423
5048
–
–
5357
5010
4616
–
–
4954
4588
4109
–
4869
4532
4109
3619
–
4448
4083
3613
3155
–
4012
3580
3142
2710
–
3535
3103
2691
2317
2336
2149
1920
1648
1544
2131
1939
1706
1496
1402
1929
1740
1523
1355
1260
1740
1564
1334
1216
1118
1571
1388
1169
1074
976
1398
1203
1027
932
831
1224
1010
885
788
684
1047
841
744
642
529
863
698
600
491
359
2730
2550
2332
2113
1850
2542
2349
2143
1908
1685
2336
2160
1944
1679
1544
2136
1948
1751
1507
1402
1934
1753
1557
1355
1260
1746
1581
1368
1214
1118
1577
1405
1179
1074
976
1407
1226
1027
932
831
1233
1037
885
788
684
3088
2942
2752
2530
2298
2918
2755
2554
2337
2094
2730
2553
2343
2138
1878
2539
2357
2160
1940
1695
2334
2166
1962
1733
1540
2135
1961
1772
1534
1402
1938
1767
1584
1361
1260
1753
1598
1402
1213
1118
1584
1422
1206
1072
976
3401
3279
3134
2955
2737
3240
3112
2962
2754
2528
3076
2941
3715
3602
3468
3320
3155
3552
3437
3303
3150
2951
3393
3275
3133
2960
2754
3228
3108
2958
2761
2559
3064
2936
2758
2565
2362
2899
2750
2560
2380
2169
2732
2547
2373
2186
1966
2529
2356
2177
1999
1768
2329
2172
2003
1808
1564
–
3907
3791
3653
3507
–
3749
3628
3489
3339
3702
3592
3465
3322
3163
3540
3429
3298
3151
2975
3379
3267
3131
2964
2760
3215
3100
2956
2762
2573
3052
2929
2757
2570
2373
2883
2741
2561
2385
2189
2717
2545
2374
2195
2004
3400
2987
2556
3761
3381
3013
2601
2195
3342
2987
2588
2233
1859
2936
2581
2246
1924
1615
2517
2195
1927
1647
1450
2149
1901
1669
1466
–
1850
1669
1502
–
–
2760
2558
2338
2909
2754
2561
2353
2140
2739
2554
2369
2172
1932
2536
2357
2169
1977
1718
2333
2168
1990
1770
1547
2136
1984
1794
1574
1402
1945
1780
1604
1382
1260
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 42
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,82
Medium speed
sensible capacity
0,77
total capacity
0,68
Low speed
sensible capacity
0,59
20
FCX 44
1,31
1,20
1,11
0,99
0,87
0,75
COOLING CAPACITY
FCX 50
Water temp.
Inlet [°C]
5
6
7
8
9
10
11
12
13
∆t
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
6
4
5
6
7
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
15
17
19
21
23
21
23
25
27
29
31
3542
3227
2912
2588
2246
3170
2885
2605
2307
1983
2833
2579
2329
2062
1721
2535
2325
2075
1817
–
2299
2097
1861
–
–
2075
1874
–
–
–
1852
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4260
3892
3516
3130
–
3848
3498
3139
2789
3778
3454
3130
2806
2474
3376
3078
2789
2496
2189
3008
2745
2491
2229
1940
2675
2456
2237
1992
–
2412
2224
2010
–
–
2193
2001
–
–
–
1970
–
–
–
–
–
5468
5083
4663
4234
–
5031
4628
4225
3813
–
4575
–
–
6406
6011
5565
–
–
5960
5539
5083
–
–
5486
5039
4593
–
5390
4996
4558
4137
–
4908
4505
4094
3700
–
4435
4032
3665
3279
–
3962
3603
3253
2912
3831
3507
3192
2885
2579
3398
3113
2833
2561
2299
–
–
–
7451
7043
–
–
–
6979
6546
–
–
–
6495
6037
–
–
6406
5986
5503
–
–
5909
5468
4987
–
–
5398
4926
4479
–
5267
4847
4418
3997
–
4733
4339
3927
3551
–
4243
3848
3489
3139
2624
2461
2284
2064
1755
2448
2290
2096
1848
1537
2278
2105
1892
1618
1355
2090
1900
1675
1367
–
1884
1690
1448
1147
–
1678
1476
1210
–
–
1469
1255
951
–
–
1258
1025
–
–
–
1045
765
–
–
–
2952
2810
2643
2467
2251
2788
2642
2470
2290
2053
2623
2472
2301
2104
1827
2448
2298
2119
1892
1581
2282
2122
1917
1666
1367
2093
1917
1702
1428
–
1892
1706
1481
1174
v
1687
1493
1251
–
–
1481
1275
992
–
–
3296
3145
2999
2831
2646
3113
2980
2829
2656
2471
2941
2809
2657
2483
2292
2786
2642
2483
2308
2102
2612
2478
2318
2127
1884
2449
2308
2138
1929
1650
2288
2134
1941
1706
1400
2102
1929
1727
1476
–
1896
1718
1509
1222
–
3632
3500
3343
3185
3015
3458
3326
3168
3013
2841
3280
3139
–
3836
3704
3545
3369
3791
3663
3523
3356
3194
3619
3486
3343
3182
3020
3443
3307
3165
3006
2854
3262
3129
2994
2845
2683
3079
2967
2828
2675
2515
2916
2803
2662
2513
2342
2762
2641
2500
2344
2170
2612
2480
2343
2175
1972
–
4164
4039
3896
3740
–
3989
3861
3720
3556
–
3819
3690
3541
3370
3772
3647
3516
3357
3195
3598
3468
3329
3172
3024
3421
3291
3141
3005
2853
3240
3111
2979
2836
2693
3061
2955
2823
2679
2527
2897
2797
2660
2516
2365
4190
3796
3402
–
4129
3791
3393
3034
4024
3700
3358
3017
2693
3603
3279
2982
2684
2386
3192
2920
2653
2395
2123
2833
2605
2377
2150
–
2531
2351
2150
–
–
3000
2838
2670
3096
2975
2829
2666
2496
2931
2808
2659
2502
2320
2775
2644
2492
2331
2137
2606
2478
2332
2154
1932
2448
2316
2157
1957
1706
2288
2146
1957
1739
1457
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 50
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,87
Medium speed
sensible capacity
0,92
total capacity
0,68
Low speed
sensible capacity
0,68
FCX54
1,26
1,18
1,14
1,03
0,86
0,76
21
English
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
COOLING CAPACITY
FCX 62
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
Water temp.
Inlet [°C]
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
5
English
∆t
6
7
8
9
10
11
12
13
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
15
17
19
21
23
21
23
25
27
29
31
4190
3725
3185
2739
2586
3734
3302
2804
2501
2358
3316
2924
2478
2287
–
2943
2618
2394
2073
–
2655
2339
2004
–
–
2394
2050
–
–
–
2125
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5511
5018
4460
3818
3241
5009
4506
3967
3325
2953
4498
4023
3501
2907
2693
4004
3567
3083
2618
2460
3544
3149
2720
2390
–
3135
2800
2418
2176
–
2800
2520
2125
–
–
2539
2246
–
–
–
2278
–
–
–
–
6974
6500
5949
5335
4609
6460
5967
5409
4776
4050
5930
5418
–
8084
7583
7015
6365
–
7556
7041
6446
5762
–
7015
6474
5847
5149
6946
6446
5874
5251
4553
6392
5855
5279
4665
3976
5800
5260
4702
4107
3437
5204
4693
4153
3595
2981
4618
4135
3651
3139
2683
4064
3632
3204
2748
2451
–
–
9315
8801
8205
–
9248
8774
8233
7624
–
8706
8205
7651
6988
–
8151
7637
7028
6338
–
7569
7028
6392
5688
–
6974
6392
5744
5056
6866
6352
5744
5111
4441
6257
5698
5111
4506
3864
5614
5064
4506
3939
3344
3490
3214
2836
2611
2460
3253
2970
2558
2387
2236
3017
2704
2314
2163
2012
2757
2411
2089
1938
1783
2480
2099
1865
1714
1558
2202
1797
1641
1485
1327
1914
1598
1417
1258
1091
1612
1344
1190
1027
845
1283
1116
959
813
575
3981
3725
3424
3030
2867
3735
3482
3171
2818
2975
3499
3240
2909
2606
2460
3262
3001
2616
2387
2236
3031
2742
2323
2163
2012
2777
2455
2089
1938
1783
2498
2158
1865
1714
1558
2221
1836
1641
1485
1327
1938
1566
1415
1258
1091
4464
4222
3955
3637
3249
4210
3982
3710
3372
3053
3977
3738
3463
3102
2869
3728
3499
3216
2836
2671
3502
3266
2967
2906
2455
3269
3029
2694
2382
2231
3043
2777
2382
2158
2007
2786
2494
2094
1936
1783
2513
2202
1860
1711
1558
4949
4720
4465
4184
3848
4701
4468
4219
3934
3581
4456
4227
5415
5208
4977
4717
4419
5175
4964
4727
4465
4167
4934
4721
4471
4213
3913
4691
4471
4233
2967
3648
4448
4226
3982
3717
3382
4198
3980
3742
3472
3107
3957
3746
3514
3229
2880
3727
3520
3281
2972
2674
3504
3293
3044
2681
2455
5861
5681
5465
5231
4963
5620
5441
5224
4986
4714
5388
5200
4977
4733
4453
5155
4960
4731
4482
4203
4915
4714
4474
4227
3955
4675
4462
3982
3982
3697
4433
4208
3986
3746
3447
4182
3978
3753
3504
3188
3944
3744
3522
3268
2921
4860
4237
3492
5391
4869
4330
3725
3111
4833
4349
3827
3251
2813
4302
3836
3363
2822
2567
3790
3380
2962
2515
2348
3334
2990
2627
2278
–
2957
2683
2344
–
–
3980
3685
3304
4205
3985
3729
3431
3066
3965
3742
3489
3170
2867
3735
3508
3252
2897
2973
3506
3278
3005
2626
2455
3273
3049
2753
2382
2231
3050
2806
2451
2158
2007
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 62
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,96
Medium speed
sensible capacity
0,83
total capacity
0,81
Low speed
sensible capacity
0,67
22
FCX 64
1,31
1,19
1,14
0,99
0,93
0,79
COOLING CAPACITY
FCX 82
Water temp.
Inlet [°C]
5
6
7
8
9
10
11
12
13
∆t
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
15
17
19
21
23
21
23
25
27
29
31
5591
4979
4320
3553
3291
4979
4427
3815
3217
3008
4427
3930
3392
2927
2725
3949
3526
3210
2645
–
3566
3156
2585
–
–
3210
2773
–
–
–
2847
–
–
–
–
–
–
–
–
–
–
–
–
–
–
7373
6701
5975
5167
4225
6688
6014
5315
4549
3782
6002
5369
4710
3984
3432
5342
4763
4159
3473
3143
4724
4219
3687
3096
2861
4192
3762
3291
2780
–
3755
3392
2894
–
–
3405
3015
–
–
–
3049
–
–
–
–
–
8676
7952
7131
6243
–
7965
7212
6405
5517
7925
7218
–
10810
10144
9381
8503
–
10106
9401
8597
7696
–
9361
8638
7803
6902
–
8611
7830
6997
6136
–
7803
7024
6230
5382
7723
6997
6270
5503
4697
6916
6230
5530
4831
4077
6136
5503
4871
4239
3539
5402
4831
4293
3728
3156
–
0
12453
11749
10985
–
–
11729
10985
10164
–
–
10966
10203
9342
–
10887
10183
9381
8477
–
10106
9361
8503
7589
–
9283
8503
7642
6754
–
8450
7628
6808
5948
–
7562
6781
6002
5194
7440
6727
5988
5275
4535
4995
4612
4127
3569
3346
4656
4262
3710
3248
3032
4318
3890
3256
2934
2718
3950
3480
2852
2621
2405
3555
3054
2532
2308
2083
3151
2599
2219
1995
1770
2741
2136
1905
1679
1442
2323
1811
1589
1358
1103
1868
1495
1270
1025
732
5671
5326
4927
4400
3939
5338
4990
4576
3978
3658
4996
4652
4211
3591
3346
4670
4310
3815
3248
3032
4340
3942
3375
2934
2718
3971
3539
2905
2621
2405
3576
3114
2532
2308
2088
3181
2681
2219
1995
1770
2774
2196
1905
1679
1444
6366
6023
5664
5232
4689
6008
5672
5313
4879
4291
5669
5337
4972
4504
3953
5337
5009
4624
4115
3651
5002
4671
4275
3674
3346
4678
4340
3898
3271
3032
4355
3986
3472
2934
2718
3994
3584
3017
2621
2405
3599
3166
2554
2308
2088
7036
6722
6367
5983
5556
6699
6373
6019
5643
5193
6354
6011
7680
7409
7082
6715
6331
7344
7073
6732
6357
5969
7018
6723
6381
6015
5619
6679
6364
6022
5668
5263
6329
6008
5688
5320
4898
5978
5686
5357
4984
4538
5647
5357
5026
4650
4132
5326
5026
4704
4297
3718
4995
4713
4372
3915
3346
8303
8055
7760
7440
7069
7987
7735
7428
7085
6718
7657
7401
7084
6742
6367
7324
7056
6740
6380
6006
6978
6711
6375
6032
5660
6644
6356
6034
5694
5315
6300
6000
5694
5351
4968
5953
5671
5369
5026
4617
5622
5348
5038
4691
4254
7420
5705
4817
7185
6486
5773
5033
4172
6432
5786
5113
4414
3648
5719
5113
4508
3875
3284
5046
4522
3984
3405
2995
4448
4003
3553
2988
–
3957
3600
3176
–
–
5680
5290
4818
5999
5681
5337
4938
4427
5654
5347
4996
4588
4008
5336
5017
4668
4219
3666
4997
4692
4329
3808
3346
4679
4370
3971
3346
3032
4365
4024
3547
2949
2718
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 82
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,80
Medium speed
sensible capacity
0,85
total capacity
0,68
Low speed
sensible capacity
0,69
FCX 84
1,24
1,06
1,10
1,00
0,91
0,80
23
English
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
COOLING CAPACITY
FCX 102
TOTAL COOLING CAPACITY [W]
Wet bulbe air temperature [°C]
Water temp.
Inlet [°C]
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
3
4
5
6
7
5
English
∆t
6
7
8
9
10
11
12
13
SENSIBLE COOLING CAPACITY [W]
Dry bulbe air temperature [°C]
15
17
19
21
23
21
23
25
27
29
31
6495
5846
5153
4403
3609
5802
5196
4576
3869
3263
5153
4612
4057
3379
2953
4569
4122
3609
2903
–
4114
3703
3162
–
–
3710
3278
–
–
–
3299
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
7808
7043
6221
5326
–
7029
6293
5514
4648
6956
6278
5586
4865
4028
6206
5571
4937
4273
3508
5485
4937
4381
3783
3119
4850
4388
3912
3306
–
4331
3956
3480
–
–
3927
3537
–
–
–
3523
–
–
–
–
–
10067
9291
8428
7519
–
9249
8457
7591
6697
–
8413
–
–
11788
10970
10025
–
–
10928
10067
9120
–
–
10046
9149
8226
–
9962
9120
8255
7360
–
9063
8226
7389
6524
–
8139
7360
6552
5730
–
7274
6524
5773
5023
7101
6423
5745
5081
4388
6264
5644
5052
4475
3862
–
–
–
13656
12816
–
–
–
12795
11914
–
–
12711
11893
10970
–
–
11809
10928
9962
–
–
10865
9941
9005
–
–
9878
8976
8053
–
9753
8890
8024
7129
–
8760
7937
7101
6264
–
7822
7029
6249
5485
5223
4880
4441
3828
3308
4881
4521
4063
3330
2985
4537
4151
3608
2912
2670
4158
3726
3139
2582
2348
3748
3293
2626
2264
2033
3330
2846
2176
1945
1706
2905
2370
1857
1621
1379
2472
1820
1536
1298
1037
2025
1447
1213
962
662
5958
5605
5230
4778
4140
5588
5248
4866
4399
3696
5227
4900
4503
3978
3315
4886
4554
4124
3491
2985
4551
4195
3696
2978
2670
4180
3770
3242
2582
2352
3770
3345
2751
2264
2033
3352
2905
2209
1945
1709
2934
2436
1857
1621
1381
6664
6333
5974
5582
5122
6294
5963
5607
5208
4725
5932
5610
5249
4847
4315
5581
5261
4898
4481
3843
5223
4921
4554
4084
3374
4888
4575
4183
3623
2993
4559
4224
3770
3125
2670
4195
3806
3315
2612
2355
3784
3381
2846
2264
2033
7366
7080
6715
6348
5940
7003
6693
6352
5971
5562
6630
6329
–
7784
7473
7105
6716
–
7426
7094
6717
6347
7337
7056
6715
6357
5969
6968
6687
6339
5991
5618
6598
6295
5988
5631
5247
6231
5951
5628
5278
4896
5878
5609
5288
4943
4525
5559
5270
4947
4595
4134
5203
4936
4623
4229
3667
–
8471
8200
7863
7501
–
8107
7835
7489
7120
–
7754
7460
7117
6734
7659
7390
7087
6727
6373
7297
7027
6707
6362
5996
6935
6652
6334
5999
5638
6563
6278
5976
5646
5293
6189
5930
5632
5302
4937
5845
5595
5295
4968
4589
7620
6798
5918
–
7562
6812
6033
5196
7447
6754
6033
5312
4547
6639
5990
5341
4677
3956
5860
5283
4713
4129
3451
5153
4677
4194
3667
–
4569
4186
3761
–
–
5980
5608
5195
6264
5964
5623
5255
4820
5913
5614
5273
4901
4432
5574
5265
4927
4548
4015
5217
4928
4594
4171
3506
4889
4598
4239
3733
3029
4571
4253
3828
3257
2670
NB: Values of capacity in bold face refer to nominal value.
Values of sensible capacity higher than values of total capacity mean that cooling is without dehumidification. In this case consider only the values of sensible capacity.
The cooling capacities in the table must be multiplied by the following factors:
MOD.
FCX 102
total capacity
1,00
Maximum speed
sensible capacity
1,00
total capacity
0,94
Medium speed
sensible capacity
0,90
total capacity
0,82
Low speed
sensible capacity
0,77
24
HEATING POWER YIELD 3-ROW COIL
FCX 17
FCX 22
50
40
30
500
400
300
200
100
1
1,5
2
2,5
3
3,5
30
40
2,5
3
400
300
200
4
1
1,5
2
20
4,5
5
5,5
∆t °C (temperature entering water - temperature entering air)
60
1050
70
600
Water flow rate [l/h]
Water flow rate [l/h]
50
40
30
500
400
300
200
50
40
30
70
60
900
750
600
450
300
150
1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5
20
2
3
4
5
6
7
8
10 11
9
Heating capacity [kW]
Heating capacity [kW]
FCX 50
FCX 62
∆t °C (temperature entering water - temperature entering air)
1050
20
50
40
30
60
∆t °C (temperature entering water - temperature entering air)
2100
70
900
750
600
450
300
20
1900
Water flow rate [l/h)
Water flow rate [l/h]
4
FCX 42
∆t °C (temperature entering water - temperature entering air)
150
3,5
Heating capacity [kW]
FCX 32
100
70
60
500
Heating capacity [kW]
700
50
600
100
0,5
20
700
70
60
Water flow rate [l/h]
Water flow rate [l/h]
20
∆t °C (temperature entering water - temperature entering air)
30
40
50
60
70
1700
1500
1300
1100
900
700
2
3
4
5
6
7
8
9 10 11 12 13
Heating capacity [kW]
500
4
8
12
16
20
Heating capacity [kW]
25
English
∆t °C (temperature entering water - temperature entering air)
600
HEATING POWER YIELD 3-ROW COIL
FCX 82
FCX 102
∆t °C (temperature entering water - temperature entering air)
English
20
30
40
50
60
2200
70
2000
1800
Water flow rate (l/h]
Water flow rate (l/h)
2100
∆t °C (temperature entering water - temperature entering air)
1500
1200
900
600
1800
1600
1400
1200
1000
800
300
4
6
8
10 12 14 16 18 20
600
22
5
7
9
Heating capacity [kW]
11 13 15 17 19 21 23 25
Heating capacity [kW]
HEATING CAPACITY CORRECTION FACTORS
The heating capacities are at maximum speed. For the other speeds, the values must be multiplied by the following factors:
MOD.
Medium speed
Low speed
26
FCX17
FCX 22
FCX 32
FCX 42
FCX 50
FCX 62
0,83
0,65
0,79
0,56
0,82
0,68
0,87
0,69
0,87
0,63
0,85
0,64
FCX 82 FCX102
0,88
0,71
0,90
0,74
HEATING POWER YIELD 4-ROW COIL
FCX 24
FCX 34
20
50
40
30
700
70
60
600
Water flow rate [l/h]
Water flow rate [l/h]
700
∆t °C (temperature entering water - temperature entering air)
500
400
300
200
100
0
1
2
3
4
5
6
400
300
200
0
1
2
3
5
6
7
8
9
FCX 54
∆t °C (temperature entering water - temperature entering air)
∆t °C (temperature entering water - temperature entering air)
1050
1000
20
50
40
30
70
60
Water flow rate [l/h]
Water flow rate [l/h]
4
Heating capacity [kW]
FCX 44
800
600
400
950
20
30
4
6
50
40
60
70
12
14
850
750
650
550
450
350
250
200
0
2
4
6
8
10
12
150
14
0
2
FCX 64
10
16
FCX 84
∆t °C (temperature entering water - temperature entering air)
2100
1900
8
Heating capacity [kW]
Heating capacity [kW]
20
40
30
50
60
∆t °C (temperature entering water - temperature entering air)
2100
70
Water flow rate [l/h]
Water flow rate [l/h]
70
60
500
Heating capacity [kW]
1700
1500
1300
1100
900
700
500
300
50
40
30
600
100
7
20
20
50
40
30
60
70
1900
1700
1500
1300
1100
900
700
500
0
5
10
15
20
25
300
0
5
10
15
20
25
30
Heating capacity [kW]
Heating capacity [kW]
HEATING CAPACITY CORRECTION FACTORS
The heating capacities are at maximum speed. For the other speeds, the values must be multiplied by the following factors:
MOD.
Medium speed
Low speed
FCX 24
FCX 34
FCX 44
FCX 54
FCX 64
FCX 84
0,81
0,56
0,83
0,66
0,81
0,60
0,87
0,62
0,80
0,59
0,84
0,65
27
English
∆t °C (temperature entering water - temperature entering air)
1-ROW COIL HEATING CAPACITY (ACCESSORY BV)
FCX 17 (BV 117)
∆t °C (temperature entering water - temperature entering air)
∆t °C (temperature entering water - temperature entering air)
400
400
70
300
250
200
150
100
50
30
20
350
Water flow rate [l/h]
Water flow rate [l/h]
60
50
40
30
20
350
English
FCX 22 (BV122)
300
250
200
150
100
1
1,2 1,4 1,6 1,8
2
2,2
0,5
1
FCX 42 (BV142)
∆t °C (temperature entering water - temperature entering air)
∆t °C (temperature entering water - temperature entering air)
20
30
40
50
60
400
70
Water flow rate [l/h]
350
3,5
3
2,5
Heating capacity [kW]
FCX 32 (BV132)
400
2
1,5
Heating capacity [kW]
Water flow rate [l/h]
70
50
0,4 0,6 0,8
300
250
200
150
30
20
350
40
60
50
70
300
250
200
150
100
100
50
50
0,5 1
1,5 2
2,5
3 3,5
4
4,5 5
0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6
Heating capacity [kW]
Heating capacity [kW]
FCX 50 (BV142)
FCX 62 (BV162)
∆t °C (temperature entering water - temperature entering air)
∆t °C (temperature entering water - temperature entering air)
400
900
800
700
20
350
30
40
60
50
70
Water flow rate [l/h]
Water flow rate [l/h]
60
50
40
300
250
200
150
300
200
50
100
28
1,5
2,5
3,5
4,5
Heating capacity [kW]
5,5
6,5
60
50
70
600
500
400
100
0,5
40
30
20
1
2
3
4
5
6
Heating capacity [kW]
7
8
9
10
1-ROW COIL HEATING CAPACITY (ACCESSORY BV)
FCX 82 (BV162)
FCX 102 (BV162)
60
50
40
30
20
900
800
70
600
500
400
300
200
100
1
2
3
4
5
6
7
8
9
50
40
30
60
70
9
10 11
700
600
500
400
300
200
100
10 11
20
1
2
3
Heating capacity [kW]
4
5
6
7
8
Heating capacity [kW]
HEATING CAPACITY CORRECTION FACTORS
The heating capacities are at maximum speed. For the other speeds, the values must be multiplied by the following factors:
MOD.
Medium speed
Low speed
FCX17
FCX 22
FCX 32
FCX 42
FCX 50
FCX 62
0,89
0,73
0,85
0,64
0,86
0,72
0,88
0,68
0,89
0,74
0,86
0,71
FCX 82 FCX102
0,9
0,76
0,91
0,81
The 3- row coil heating capacity in the fancoil quipped with BV coil accessory ( 3R + 1R lay-out) are detected by the charts /
graphs relating to the 3-row standard coil by applying the here below coefficients.
Total cooling capacity
Sensible cooling capacity
Heating
= 0,99
= 0,98
= 0,99
29
English
900
800
700
∆t °C (temperature entering water - temperature entering air)
Water flow rate [l/h]
Water flow rate [l/h]
∆t °C (temperature entering water - temperature entering air)
DIRECT EXPANSION COIL COOLING CAPACITY
Evaporation temperature:
A = 2,5 °C
B = 5 °C
C = 7,5 °C
D = 10 °C
A
B
C
D
2,7
Cooling capacity [kW]
2,2
1,7
1,2
0,7
15
17
19
21
23
1,7
A
1,5
B
C
D
1,3
1,1
0,9
0,7
21
wet bulb temperature intake air [°C]
23
25
27
29
31
wet bulb temperature intake air [°C]
A
B
C
D
5
4
3
2
1
15
17
19
21
23
Sensible cooling capacity [kW]
FCX 32
2,5
A
B
C
2
D
1,5
1
21
wet bulb temperature intake air [°C]
23
25
27
29
31
dry bulb temperature intake air [°C]
7
A
B
C
D
6
5
4
3
2
1
15
17
19
21
23
Sensible cooling capacity [kW]
FCX 42
3,5
A
B
C
D
3
2,5
2
1,5
wet bulb temperature intake air [°C]
21
23
25
27
29
31
dry bulb temperature intake air [°C]
FCX 50
9
A
B
C
D
7
5
3
1
15
17
19
21
23
wet bulb temperature intake air [°C]
30
Sensible cooling capacity [kW]
English
3,2
Sensible cooling capacity [kW]
FCX 22
3
A
B
C
D
2,5
2
1,5
1
21
23
25
27
29
dry bulb temperature intake air [°C]
31
DIRECT EXPANSION COIL COOLING CAPACITY
Evaporation temperature:
A = 2,5 °C
B = 5 °C
C = 7,5 °C
D = 10 °C
FCX 62
10
8
6
4
2
15
17
19
21
6
23
A
B
C
D
5
4
3
English
A
B
C
D
Sensible cooling capacity [kW]
Cooling capacity [kW]
12
2
21
wet bulb temperature intake air [°C]
23
25
27
29
31
wet bulb temperature intake air [°C]
FCX 82
11
9
7
5
3
15
17
19
21
7
Sensible cooling capacity [kW]
A
B
C
D
13
23
A
B
C
6
5
D
4
3
21
wet bulb temperature intake air [°C]
23
25
27
29
31
dry bulb temperature intake air [°C]
FCX 102
15
12
9
6
3
15
17
19
21
23
A
B
C
7
Sensible cooling capacity [kW]
A
B
C
D
6
D
5
4
3
21
wet bulb temperature intake air [°C]
23
25
27
29
31
dry bulb temperature intake air [°C]
COOLING CAPACITY CORRECTION FACTORS
The cooling capacity are referred to the maximum speed. For the other speeds, the values must be multiplied by the following factors:
MOD.
Medium speed
Low speed
FCX17
total capacity
sensible capacity
total capacity
sensible capacity
FCX 22
FCX 32
0,84
0,83
0,61
0,58
FCX 42
0,86
0,85
0,7
0,68
FCX 50
0,85
0,84
0,67
0,65
0,9
0,88
0,71
0,68
FCX 62
0,85
0,82
0,67
0,64
FCX 82 FCX102
0,89
0,88
0,74
0,7
0,92
0,91
0,8
0,77
Note: Sensible power values are higher than the total power and they show the cooling is carried out without dehumidification. Only the sensible power values must be kept into consideration.
31
HANGING VERSION AVAILABLE STATIC PRESSURE
IPO series fancoils have been designed to adjust available static pressure provided by the fan to pressure drop in the ducting
system by selecting the appropriate operating speed.
Tables give the available static pressure of machines fitted with
multiple-speed extra-strength motors, according to air flow and
fan speed (L1...L7).
The diagrams also illustrate the available static pressure curves
of models with standard motors (P-PE) operating at maximum
and medium speed.
L1: max. speed PO version
L7: min. speed PO version
max. speed P version
average speed P version
60
Av.Stat.pressure [Pa]
Av.Stat.pressure [Pa]
FCX 32 - 34
L1
45
L2
L3
30
L4
L5
L6
15
L7
0
140 155 170 185 200 215 230 245 260 275 290
60
L1
L2
45
L3
L4
30
15
L5
L6
L7
0
260 275 290 305 320 335 350 365 380 395 410 425 440 455
Air flow rate [m3/h]
Air flow rate [m3/h]
FCX 42 - 44
FCX 50 - 54
L3
L4
45
L5
30
L6
15
0
Av.Stat.pressure [Pa]
60
60
L1
L2
L7
330 355 380 405 430 455 480 505 530 555 580 605
Air flow rate [m3/h]
FCX 62 - 64
Av.Stat.pressure [Pa]
80
L3
60
L1
L5
40
0
L2
L4
L6
20
L7
520 560 600 640 680 720 760 800 840 880 920
Air flow rate [m3/h]
FCX 102 (only P)
60
40
20
0
900 940 980 1020 1060 1100 1140 1180 1220 1260 1300
Air flow rate [m3/h]
32
L1
50
L2
40
30
L3
L4
20
L5
10
L6
0
400 430 460 490 520 550 580 610 640 670 700 730
Air flow rate [m3/h]
FCX 82 - 84
Av.Stat.pressure [Pa]
Av.Stat.pressure [Pa]
75
Av.Stat.pressure [Pa]
English
FCX 22 - 24
60
40
L5
L3
L2
L6
20
0
L1
L4
L7
700 740 780 820 860 900 940 980 1020 1060 1100 1140
Air flow rate [m3/h]
3-ROW COIL PRESSURE DROP
FCX 62
50
FCX 32
40
FCX 22
FCX 17
FCX 102
FCX 42
FCX 50
FCX 82
30
20
10
0
0
200
400
800 1000 1200 1400 1600 1800 2000 2200
600
Water flow rate [l/h]
The pressure drops in the charts above refer to an average water temperature of 10 °C. The following table shows the corrections
to apply to the pressure drops with a variation in average water temperature.
Average water temperature
Correction factor
°C
5
1,03
10
1
15
0,96
20
0,91
50
0,78
60
0,75
70
0,72
4-ROW COIL PRESSURE DROP
Coil pressure drop (kPa]
50
FCX 64
40
FCX 44
FCX 54
FCX 34
30
FCX 84
FCX 24
20
10
0
0
200
400
800 1000 1200 1400 1600 1800 2000 2200
600
Water flow rate [l/h]
The pressure drops in the charts above refer to an average water temperature of 10 °C. The following table shows the corrections
to apply to the pressure drops with a variation in average water temperature.
Temperatura media dell’acqua
Correction factor
°C
5
1,03
10
1
15
0,96
20
0,91
50
0,78
60
0,75
70
0,72
1-ROW COILPRESSURE DROP (accessory BV)
Coil pressure drop (kPa]
50
40
FCX 62
FCX 22-32
FCX 42-50
30
FCX 17
FCX 82-102
20
10
0
0
100
200
300
400
500
600
700
800
900
Water flow rate [l/h]
The pressure drops in the charts above refer to an average water temperature of 65 °C. The following table shows the corrections
to apply to the pressure drops with a variation in average water temperature.
Average water temperature
Correction factor
°C
5
1,4
10
1,36
15
1,31
20
1,24
50
1,06
60
1,02
70
0,98
33
English
Coil pressure drop [kPa]
60
CORRECTION FACTORS IN COOLING OPERATION WITH GLYCOL WATER
Reading Key:
Pressure drops
Water flow
Capacity
IN COOLING
IN HEATING
1,4
1,2
1,1
Correction factor
Correction factor
1,3
1,0
0,9
0,8
6
7
8
9
10
11
12
13
14
15
16
1,2
1,1
1,0
0,9
0,8
17 °C
30
Average temperature of the glycol water
40
50
60
70
80
90 °C
Average temperature of the glycol water
1,2
1,4
1,1
1,3
FCorrection factor
Correction factor
GLYCOL WATER AT 20%
1,0
0,9
0,8
0,7
0,6
6
7
8
9
10
11
12
13
14
15
16
1,2
1,1
1,0
0,9
0,8
17 °C
30
Average temperature of the glycol water
40
50
60
70
80
90 °C
Average temperature of the glycol water
GLYCOL WATER AT 35%
1,6
1,4
1,5
1,3
1,4
1,3
Correction factor
Correction factor
English
GLYCOL WATER AT 10%
1,2
1,1
1,0
0,9
0,8
0,7
0,6
0,5
6
7
8
9
10
11
12
13
14
15
16
17
Average temperature of the glycol water
34
18 °C
1,2
1,1
1,0
0,9
0,8
30
40
50
60
70
80
Average temperature of the glycol water
90 °C
Speed
FCX17
Max
Med.
Min
125
40,4
34,1
26,1
250
45,8
40,2
33,0
Band middle frequency [Hz]
500
1000
2000
43,4
39,7
36,2
36,7
32,6
26,9
29,2
26,1
19,7
4000
28,3
21,1
16,2
8000
14,8
4,0
4,1
Global
dB
49,3
43,0
35,8
dB (A)
45 (E)
38 (E)
31 (E)
FCX22
Max.
Med.
Min.
45,6
39,2
25,8
50,6
44,9
33,0
48,4
41,7
29,1
44,7
37,6
26,2
41,3
31,9
19,9
33,3
25,8
16,2
19,7
7,5
2,6
54,2
47,9
35,7
50 (E)
43 (E)
31 (E)
FCX32
Max.
Med.
Min.
43,6
37,0
28,9
48,8
43,0
36,1
46,4
39,7
32,2
42,7
35,7
29,0
39,0
29,9
22,9
31,3
24,0
19,2
17,7
5,4
3,1
52,3
45,9
38,8
48 (E)
41 (E)
34 (E)
FCX42
Max.
Med.
Min.
46,6
39,6
31,9
51,8
44,8
39,1
49,4
42,4
35,2
45,7
38,7
32,0
42,0
35,0
25,9
34,3
27,3
22,2
20,7
13,7
6,1
55,3
48,3
41,8
51 (E)
44 (E)
37 (E)
FCX50
Max.
Med.
Min.
51,6
46,6
37,6
56,8
51,8
42,8
54,4
49,4
40,4
50,7
45,7
36,7
47,0
42,0
33,0
39,3
34,3
25,3
25,7
20,7
11,7
60,3
55,3
46,3
56 (E)
51 (E)
42 (E)
FCX62
Max.
Med.
Min.
52,6
46,4
37,7
57,5
51,8
42,6
55,4
49,6
40,4
51,7
45,7
36,8
48,3
41,9
33,0
40,3
34,3
25,3
26,7
20,8
11,7
61,2
55,3
46,3
57 (E)
51 (E)
42 (E)
FCX82
Max.
Med.
Min.
57,6
52,4
45,6
62,8
57,8
51,0
60,5
55,5
48,4
56,7
51,7
44,6
53,2
48,2
41,1
45,0
40,1
33,2
31,8
26,7
19,8
66,3
61,3
54,4
62 (E)
57 (E)
50 (E)
FCX102
Max.
Med.
Min.
61,5
56,6
51,7
66,7
61,8
56,8
64,4
59,4
54,4
60,7
55,7
50,7
57,1
52,0
46,9
49,3
44,3
39,3
35,8
30,7
25,7
70,3
65,3
60,3
66 (E)
61 (E)
56 (E)
Mod.
(E) =
EUROVENT certified performance.
SOUND PRESSURE LEVEL RATED IN DB (A)
Speed
Max
Med.
Min
Mod. FCX
17
36,5
29,5
22,5
22
41,5
34,5
22,5
32
39,5
32,5
25,5
42
42,5
35,5
28,5
50
47,5
42,5
33,5
62
48,5
42,5
33,5
82
53,5
48,5
41,5
102
57,5
52,5
47,5
Sound pressure level (weighted A) measured in a room with 85 m3 volume , reverberation time t= 0,5 s , direction.factor Q= 2 ,
distance r= 2,5m .
35
English
SOUND POWER LEVEL RATED IN dB (A)
SOUND POWER LEVEL RATED IN DB (A)
Speed
FCX24
Max.
Med.
Min.
125
46,5
42,0
29,8
250
51,6
47,9
37,2
Band middle frequency [Hz]
500
1000
2000
49,3
45,7
42,3
44,8
40,6
34,8
33,1
30,0
23,8
4000
34,3
28,8
20,2
8000
20,8
10,5
5,1
Global
dB
54,2
47,9
35,7
dB (A)
51
46
35
FCX34
Max.
Med.
Min.
43,7
37,2
30,8
48,8
42,5
38,0
46,5
40,0
34,2
42,7
35,7
31,1
39,1
29,9
24,9
31,3
24,2
21,2
17,6
6,1
5,7
52,3
45,9
38,8
48
41
36
FCX44
Max.
Med.
Min.
50,4
45,9
36,2
55,8
50,6
42,5
53,7
48,4
39,4
49,3
44,6
36,2
46,0
41,3
29,8
38,5
33,3
26,2
24,7
20,0
9,9
55,3
48,3
41,8
55
50
41
FCX54
Max.
Med.
Min.
51,8
48,5
40,0
56,8
53,8
44,8
54,2
51,2
42,3
50,7
47,7
38,7
47,3
44,3
35,2
39,2
36,4
27,3
25,5
22,8
13,9
60,3
55,3
46,3
56
53
44
FCX64
Max.
Med.
Min.
52,3
46,5
39,6
57,6
52,0
44,5
55,4
49,6
42,4
51,7
45,7
39,1
48,3
41,7
34,8
41,1
34,3
27,9
26,5
20,6
13,7
61,2
55,3
46,3
57
51
44
FCX84
Max.
Med.
Min.
56,8
52,5
46,7
61,8
57,7
52,3
59,4
55,5
49,6
55,7
51,7
45,2
52,0
48,2
42,1
44,3
40,3
34,5
30,9
26,6
21,2
66,3
61,3
54,4
61
57
51
English
Mod.
SOUND PRESSURE LEVEL RATED IN dB (A)
Velocità
Max.
Med.
Min.
Mod. FCX
24
42,5
37,5
26,5
34
39,5
32,5
27,5
44
46,5
41,5
32,5
54
47,5
44,5
35,5
64
48,5
42,5
35,5
84
52,5
48,5
42,5
Sound pressure level (weighted A) measured in a room with 85 m3 volume , reverberation time t= 0,5 s , direction.factor Q= 2 ,
distance r= 2,5m .
36
FCX-PO SOUND POWER LEVELS OF DUCTED HANGING VERSIONS in dB
The sound power level generated by ducted fancoils (FCX -PO)
depends on fan speed and on the point of operation reached
according to pressure drop.
The following diagrams can be used to obtain the sound power
level (weighted A), expressed in dB (A) in relation to the relevant curve, according to air flow and available static pressure
values.
The overall sound power level expressed in dB(A) are given for each curve.
FCX 32
52
54
90
58
56
50
75
48
60
46
45
44
42
30
40
15
38
0
140 155 170 185 200 215 230 245 260 275 290
Available static pressure [Pa]
Available static pressure [Pa]
90
48
46
60
44
45
42
30
40
15
38
0
260 275 290 305 320 335 350 365 380 395 410 425 440 455
Air flow rate [m3/h]
FCX 42
56
90
58
54
120
105
Available static pressure [Pa]
Available static pressure [Pa ]
Air flow rate [m3/h]
FCX 50
135
52
90
75
50
60
48
45
46
30
44
15
42
0
75
59
50
60
48
45
46
30
44
15
0
330 355 380 405 430 455 480 505 530 555 580 605
400 430 460 490 520 550 580 610 640 670 700 730
Air flow rate [m3/h]
FCX 82
140
120
100
54
56
58
60
62
64
52
50
80
60
48
40
46
20
44
0
520 560 600 640 680 720 760 800 840 880 920
Air flow rate [m3/h]
120
Available static pressure [Pa]
FCX 62
58
56
54
52
Air flow rate [m3/h]
Available static pressure [Pa]
54
52
50
75
English
FCX 22
100
60
62
64
58
80
60
56
40
54
20
52
0
700 740 780 820 860 900 940 980 1020 1060 1100 1140
Air flow rate [m3/h]
37
English
ACCESSORIES
AMP BRACKETS FOR HANGING UNITS
Kit includes brackets and bolts for ceiling
installation..
BC AUXILIARY CONDENSATE DRIP
TRAY
Made of thermoplastic material, collects
the condensate forming in summer
operation in the region of the noninsulated hydraulic connections and
conveys it to the outside. In particular,
the BC4 drip tray must be used on all the
sizes with vertical installation of the unit.
Attention: The valve VCF and the
driptray BC4 can be installed at the
same time on the fan coil.
Attention: BC8 and BC9 are not
applicable to fan coils with cabinet case
The BC5 drip tray must be installed on
sizes FCX 17, 22, 32, 42, 50 and 24, 34,
44, 54 with horizontal installation.
The BC6 drip tray must be installed
on sizes 62, 82, 102 e 64, 84 with
horizontal installation.
The BC8 drip tray must be installed on
sizes FCX 17, 22, 32, 42, 50 and 24, 34,
44, 54 in version P - PE - PO - POE with
horizontal installation.
The BC9 drip tray must be installed on
sizesFCX 62, 82, 102 and 64, 84 in
version P - PE - PO - POE with horizontal
installation.
BV WATER HEATING COIL
The single-row heating coil can be
installed in four-tube fancoils above the
standard coil.Coil operation is regulated
by a control panel, that actuates a twin
valve
CHF VENTILCASSAFORMA
A galvanised template that makes it
possible to space to the house fan coils
in the wall (FCX P). The template will
make masonary work easy during the
construction of a niche where the fan
coils will be intalled. When work is
finished the fan coil will be completely
hidden from view.
DSC
C O N D E N S AT E D R A I NAG E
DEVICE
A pump drains condensate from the
unit when natural runoff is not possible.
Installed on the exterior of the unit
GA INTAKE LOUVRE
Fixed slat sheet metal louvre with stoved
polyurethane powder paint finish. The
sub-frame is supplied as standard
GAF INTAKE LOUVRE WITH FRAME
AND FILTER
Fixed slat louvre with stoved
polyurethane powder paint finish; rear
side features frame for the filter. The subframe and filter are supplied as standard.
GM DELIVERY LOUVRE
Louvre with high-resistance enamel
finish; comes with adjustable heatmoulded plastic slats for air diffusion.
The subframe is supplied as standard.
MA HIGH COVER CABINET
Consisting of the cover cabinet, fixed
louver and air filter for fan coil in
vertical, floor-standing version. The
FCX for ceiling installation with the MA
cabinet assume the characteristics of the
38
FCX-AS and can only be fitted with the
accessories reserved for this model. BC8
and BC9 are not applicable to fan coils
with cabinet case.
MU UNIVERSAL COVER CABINET
Consisting of the cover cabinet, tiltable
(in sizes 17, 22, 32, 42 and 50) or
fixed louver (in sizes 62, 82 and 102)
and air filter for universal version fan
coil (FCX - U). The FCX for ceiling
installation with the MU cabinet assume
the characteristics of the FCX-US and
can only be fitted with the accessories
reserved for this model. BC8 and BC9
are not applicable to fan coils with
cabinet case..
PA INTAKE PLENUM
In galvanized steel, complete with
connections for circular section ducts of
diameter 200 mm.
There are two assembly positions for the
plenum, for intake parallel to the fan coil
or intake at 90°.
PA FRONT INTAKE PLENUM
In galvanized steel, complete with
connections for circular section ducts of
diameter 200 mm. The plenum can be
used with a front intake coupling parallel
to the fan coil delivery or, in sizes PA 32
- 42 - 62 F, also with lateral intake.
PC REAR COVER PANEL
Conveniently covers exposed rear fancoil
sections.
The panel is required by current safety
standards for units installed away from
the room wall.
PCR CONTROL PANEL COVER
Galvanised sheet metal cover designed
to protect unit controls and electrical
terminals of ducted installations with
electrical resistance.
PM DELIVERY PLENUM
Galvanised sheet metal plenum,
externally insulated, complete with
plastic delivery unions for circular
section ducting.
RD STRAIGHT CONNECTION FOR
AIR DELIVERY
Galvanised sheet metal used to convey
air in case of installation of vertical or
horizontal recessed fan coil.
RDA STRAIGHT CONNECTION FOR
AIR INTAKE
Galvanised sheet metal used to convey
intake air in case of installation of
vertical or horizontal recessed fan coil.
RP CONNECTION AT 90° FOR AIR
DELIVERY
Galvanised sheet metal used to convey
air in case of installation of vertical or
horizontal recessed fan coil.
RPA CONNECTION AT 90° FOR AIR
INTAKE
Galvanised sheet metal used to convey
intake air in case of installation of
vertical or horizontal recessed fan coil.
RX ELECTRIC RESISTANCE
Armoured electric resistance, complete
with safet thermostat. It is available as an
accessory for all versions.
SE FRESH AIR DAMPER
Foreseen for versions A, AS, ACB, ACT,
APC, P, PPC, PO and PE with skirting
and allows the changing of air in the
room. It is mounted at the base of the fan
coil, between the skirting. The manual
control is loacted on the right skirting.
SIT 3
Each fan coil has a SIT3 card that
becomes Slave and can be controlled
by a central control panel with
electromechanic selector or with SIT5.
Up to 10 fan coils can be applied with
SIT 3 and one central control unit. The
electronic control panels and those
equipped with valve controls must be
interfaced with a SIT 5. The electronic
control panels with speed control only
can be connected directlt to the SIT 3
without interface SIT 5.
SIT 5
The SIT 5 accessory, interface master
card Master, is connected to electronic
control panels or electromechanic
control panels with valave controls
and /or electric resistances. The SIT 5
interface card connected (up to 10) are
all equipped with interface Slave SIT3.
SW3 MINIMUM WATER TEMPERATURE
PROBE
The SW3 accessory is a probe for
detecting the water temperature of the
heating coil to prevent functioning when
the temperature is less than 39°C. The
SW3 probes are powered by a 230V
single phase voltage. The probes are
equipped with cables 2500mm long.
VCF 3 WAY VALVE KIT
The SW3 probe must be combined to
this accessory.
Kit complete with copper
connections and 3 way valves all
or nothing type, to be powered by a
230 V ~ 50Hz voltage supply.
They are available for fan coils :
- with 3 row coil 4 (VCF41, VCF42,
VCF43),
- with 4 row coil(VCF42, VCF43),
- with 1 row additional coil (BV) (VCF44,
VCF45).
* Attention: The VCF valve and the drip
tray BC4 can be installed at the same
time as the fan coil.
ZX5 - ZX6 SKIRTING FOR HIGH
CABINET
In plastic, mounted at the base of the
cabinet when the appliance is placed on
the floor.
ZX7 - ZX8 SKIRTING FOR WALL
VERSION
In galvanised steel, mounted at the base
of the cabinet when the appliance is
placed on the floor and recessed into the
wall.
CONTROL PANEL
F M T 1 0 C O N T R O L PA N E L W I T H
ELECTRONIC THERMOSTAT FOR WALL
RECESSING
Electronic thermostat for fan coils installed on plants with 4 pipes, 2 pipes and 2
pipes with resistance, with the possibility of connecting 2 On - Off valves for
the interception of coil feeding water.
Simplified controls with only 2 selector switches for temperature control and
fan control (3 speed). External air probe
(cable length 6 metres, supplied with
the probe-holder) to be positioned inside
the fan coil. Recess installation (module
503).
For further information refer to the accessory instructions.
F M T 2 0 C O N T R O L PA N E L W I T H
ELECTRONIC THERMOSTAT AND LCD
FOR WALL RECESSING
Electronic thermostat with LCD for fan
coils installed on plants with 4 pipes, 2
pipes and 2 pipes with resistance with
the possibility of connecting 2 On - Off
valves for the interception of coil feeding water. Air temperature probe inside
panel.
Recess installation (module 503).
KTL M REMOTE CONTROL KIT WITH
THERMOSTAT
Kit with adjustment thermostat made up
from an I.R. remote control, an I.R receiver, a circuit board with air temperature
probe, the connection cable, brackets
and fixing equipment. KTLM can be
applied to a fan coil installed in a plant
with 2 pipes with or without water valve
or with 4 pipes with water valve. For fan
coils with cabinet in the FCX series.
For further information refer to the accessory instructions.
KTL P REMOTE CONTROL KIT WITH
THERMOSTAT
Kit with adjustment thermostat made up
from an I.R. remote control, an I.R receiver, a circuit board with air temperature
probe, the connection cable, brackets
and fixing equipment. can be applied
to a fan coil installed in a plant with 2
pipes with or without water valve or with
4 pipes with water valve. For fan coils
with cabinet in the FCX series.
For further information refer to the accessory instructions.
P C T 2 C O N T R O L PA N E L W I T H
THERMOSTAT
Control panel with electro-mechanical
thermostat for plants with 2 pipes with
ventilation thermostating.
PTI MULTI-FUNCTION CONTROL
PANEL WITH THERMOSTAT
Electronic control panel for plants with
two pipes, with electronic multi-function
thermostat; it has the same functions as
the “electronic multi-function thermostat
installed in the ACT version”. Installation
on board and on wall.
For further information refer to the accessory instructions.
PX2 CONTROL PANEL WITH SWITCHOVER
Control panel for the manual control of
fan speed, made up of an on/off switchover with 3 positions for the selection of
fan speed. Installation on board and on
wall.
For further information refer to the accessory instructions.
P X A E C O N T R O L PA N E L W I T H
E L E C T R O N I C M U LT I - F U N C T I O N
THERMOSTAT
Eltronic multi-function room thermostat in plants with two or four pipes.
Simplified controls with only two selector switched for control of the temperature and ventilation, 3 speed + automatic
speed, on-off and automatic summer/
winter switch-over, depending on the
temperature of the water. The SW minimum water temperature probe is available as an accessory, which prevents
functioning in central heating mode with
water temperature below 35°C. Wall
installation.
For further information refer to the accessory instructions.
P X A I C O N T R O L PA N E L W I T H
E L E C T R O N I C M U LT I - F U N C T I O N
THERMOSTAT
Electronic multi-function room thermostat for fan coils in plants with two or
four pipes. Simplified controls with only
two selector switched for control of the
temperature and ventilation, 3 speed +
automatic speed, on-off and automatic summer/winter switch-over, depending on the temperature of the water.
Complete with minimum water temperature probe, which prevents functioning
in central heating mode with water temperature below 35°C.
Installation on board.
For further information refer to the accessory instructions.
P X A R C O N T R O L PA N E L W I T H
E L E C T R O N I C M U LT I - F U N C T I O N
THERMOSTAT
Electronic multi-function room thermostat for fan coils in plants with two pipes
and electric resistance. Simplified controls with only two selector switched for
control of the temperature and ventilation, 3 speed + automatic speed, on-off,
activation of the electric resistance when
desired and automatic summer/winter
switch-over, depending on the temperature of the water. Complete with minimum water temperature probe, which
prevents functioning in central heating
mode with water temperature below
35°C. By means of appropriate configuration of the board dip-it can also be
used in plants without electric resistance,
with two or four pipes. For installation
on the machine or wall installation.
For further information refer to the accessory instructions.
PXBI ELECTRONIC CONTROL PANEL
Control panel with electronic room thermostat with simplified functions. It has
the same functions as the “Thermostat
installed on the ACB version”. The room
temperature probe is positioned inside
the thermostat.
The thermostat cannot be coupled with
a water temperature probe. Installation
on board.
For further information refer to the accessory instructions.
PXLM MULTIFUNCTION CONTROL
PANEL
Kit for motorization of the fins and control with a control panel. Consists of a
control panel with electronic thermostat,
a motor to be fitted to the delivery fins, a
feed card and probes for detecting water
and air temperature.
The PXLM controls the operation of a
fan coil inserted in a two-pipe hydraulic
plant.
The control parameters of the electronic
panel may be programmed even after
installation, simply be pressing the two
buttons.
Ideally the panel is for wall installation,
but can also be fitted on board the unit
provided that the ambient probe used
is external to the fan coil (excluding
that inside the panel) and that suitable
corrections are made to the probe calibration. For further information, see the
instructions coming with the accessory.
WMT05 CONTROL PANEL WITH
THERMOSTAT
Electronic thermostat for fan coils installed in plants with 2 pipes. The panel is
protected electrically by an internal fuse.
Wall installation. For further information
refer to the accessory instructions.
WMT10 CONTROL PANEL WITH
THERMOSTAT
Electro-mechanical thermostat for fan
coils installed in plants with 4 pipes, 2
pipes and 2 pipes with resistance, with
the possibility to connect two On - Off
valves for the interception of coil feeding
water.
The panel is protected electrically by an
internal fuse. Continuous or thermostated ventilation. Wall installation.
39
English
ACCESSORIES
ACCESSORIES
Consult the table of compatibility for the selection.
Accessory
Fan Coil FCX
Size
17
English
AMP
4
5
BC 6
8 (*)
9 (*)
117 (**)
122 (**)
BV 132 (**)
142 (**)
162 (**)
17
22
CHF 32
42
62
DSC 4
17
22
GA 32
42
62
17
22
GAF 32
42
62
17
22
GM 32
42
62
17 (*)
22 (*)
MA 32 (*)
42 (*)
62 (*)
17 (*)
22 (*)
MU 32 (*)
42 (*)
62 (*)
17
22
PA 32
42
62
17
22
PA F 32
42
62
17
18
22
23
PC 32
33
42
43
62
PCR 1
2
17
22
PM 32
42
62
40
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
22 - 24
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
32 - 34
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
42 - 44
✔
✔
✔
Version
50 - 54
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
62 - 64
✔
✔
82 - 84
✔
✔
102
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
P-PPC-PO-PE-U-UE
all
P-PPC-PO-PE-U-UE
P-PPC-PO-PE-U-UE
P-PPC-PO-PE
P-PPC-PO-PE
A-AS-ACT-ACB-P-U
A-AS-ACT-ACB-P-PO-U
A-AS-ACT-ACB-P-PO-U
A-AS-ACT-ACB-P-PO-U
A-AS-ACT-ACB-P-PO-U
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
all
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
A-AS-ACT-ACB-APC
U
A-AS-ACT-ACB-APC
U-UE
A-AS-ACT-ACB-APC
U-UE
A-AS-ACT-ACB-APC
U-UE
A-AS-ACT-ACB-APC-U-UE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
ACCESSORIES
Accessory
FCX Fan coil
Size
17
22
RD 32
42
62
17
22
RDA 32
42
62
17
22
RP 32
42
62
17
22
RPA 32
42
62
17 (**)
22 (**)
32 (**)
RX 42 (**)
52 (**)
62 (**)
15X (***)
20X (***)
SE 30X (***)
40X (***)
80X (***)
SIT3
SIT5
SW3
41 (****)
42 (****)
VCF 43 (****)
44 (****)
45 (****)
5
ZX 6
7
8
✔
22 - 24
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
32 - 34
42 - 44
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Version
50 - 54
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
The 4-row models are only available in the P and PO versions
(*) BC8 and BC9 are not applicable to fan coils with cover cabinets.(**)
For the 4-row model, accessories RX and BV are not available..
(***) SE accessories are matched with ZX feet
COMBINATION OF PANELS/ FAN COILS
Mod.
IN OUT
FCX - AS
FMT10
FMT20
KTLM
KTLP
PCT2
PTI
PX2
PXAE
PXAI
PXAR
PXBI
PXLM
WMT05
WMT10
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
IN = control panel installed on machine
✔
✔
62 - 64
82 - 84
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VCF42 (FCX 24-34-44-54) e VCF43 (FCX 64-84).
FCX 62-102 U
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
P-PPC-PO-PE
A-AS-P-PPC-U
A-AS-P-PO-PE-U-UE
A-AS-P-PO-PE-U-UE
A-AS-P-PO-PE-U-UE
A-AS-P-PO-PE-U-UE
A-AS-P-PO-PE-U-UE
A-AS-ACT-ACB-P
A-AS-ACT-ACB-P-PO-PE
A-AS-ACT-ACB-P-PO-PE
A-AS-ACT-ACB-P-PO-PE
A-AS-ACT-ACB-P-PO-PE
AS-P-PO-U
AS-P-PO-U
AS-P-PO-U
A-AS-ACT-ACB-P-PPC-PO-U
A-AS-ACT-ACB-P-PPC-PO-U
A-AS-ACT-ACB-P-PPC-PO-U
A-AS-P-PPC-PO-U
A-AS-P-PPC-PO-U
A-AS-ACT-ACB
A-AS-ACT-ACB
P-PPC-PO-PE
P-PPC-PO-PE
(****) The 4-row models may only be used in combination with valves
FCX 17-50 U
✔
✔
✔
102
✔
✔
✔
✔
✔
FCX - P
FCX - PO
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
OUT = wall-mounted control panel
41
English
17
ACCESSORIES
English
AMP SUPPORTS FOR WALL/CEILING MOUNTING VERSION
BC4 DRIP TRAY
BC5-6 DRIP TRAY
VCF valve and BC4
drip tray can not be
contemporary installed on the same fan
coil.
2
2
2
DIMENSIONS [mm]
Mod.
FCX 22÷50
A [mm]
109
FCX 62÷82
126
DIMENSIONS [mm]
Mod.
BC 5
A [mm]
375
B [mm]
69
BC 6
476
72
BC8-9 DRIP TRAY FOR HORIZONTALLY INSTALLATION
DIMENSIONS [mm]
Mod.
BC 8
A [mm]
420
B [mm]
146
C [mm]
25
B
6
ø1
C
42
BC 9
524
146
25
ACCESSORIES
BV 1-ROW HEATING COIL
FCX 62 ÷ 102
OUT
OUT
OUT
OUT
96
96
IN
IN
155
IN
156
194
170
153
167 mm
378
194
323
Øe 1
519
408
Øe 17,5
IN
m
m
88
108
49
65 mm
For FCX - U versions do not consider the foot - For all model the hydraulic attack are the following: 1/2” (female)
CHF VENTILCASSAFORMA
DSC CONDENSATE DISCHARGE DEVICE
FC
X
DS
C4
DS
C4
X
FC
43
English
FCX 17 ÷ 50
ACCESSORIES
GA AIR SUCTION GRILL
English
GAF AIR SUCTION GRILL
DIMENSIONS [mm]
Mod.
A
B
C
D
E
GA 17
396 214 440 258 390
GA 22
506 214 550 258 500
GA 32
737 214 781 258 731
GA 42
957 214 1001 258 951
GA 62
1078 244 1122 288 1072
F
208
208
208
208
238
DIMENSIONS [mm]
Mod.
A
B
GAF 17
451 270
GAF 22
561 270
GAF 32
792 270
GAF 42 1012 270
GAF 62 1133 300
C
495
605
836
1056
1177
D
E
F
G
314 444 262 390
314 554 262 500
314 785 262 731
314 1005 262 951
344 1126 292 1072
H
208
208
208
208
238
GM AIR DELIVERY GRILL
DIMENSIONS [mm]
Mod.
GM 17
GM 22
GM 32
GM 42
GM 62
60
6
48
A
347
457
688
908
1029
B
C
134 392
134 502
134 733
134 953
134 1074
PCR RESISTANCE COVER PANEL
B
A
44
C
DIMENSIONS [mm]
Mod.
PCR 1
A [mm]
340
B [mm]
170
C [mm]
93
PC42
445
170
93
D
E
178 342
178 452
178 683
178 903
178 1024
F
128
128
128
128
128
ACCESSORIES
MA HIGH COVER CABINET
B
22
0
MA 17
MA 22
MA 32
MA 42
MA 62
A [mm]
458
458
458
458
563
B [mm]
640
750
980
1200
1320
English
Mod.
A
BC8 and BC9 are not compatible with MA accessories
MU UNIVERSAL COVER CABINET
B
C
B
C
A
A
MU 17 - 22 - 32 - 42 - 50
Mod.
MU 62 - 82 - 102
MU 17
MU 22
MU 32
MU 42
MU 62
A [mm]
520
520
520
520
590
B [mm]
640
750
980
1200
1320
BC8 and BC9 are not compatible with MU accessories
PC REAR CLOSING PANEL
B
DIMENSIONS [mm]
Mod. PC 22
PC 32
A [mm] 740
971
B [mm] 437
437
PC42
1191
437
PC62
1312
542
A
45
ACCESSORIES
215
PA INTAKE PLENUM
A
200
English
216
Mod.
A [mm]
No. of intake blocks
PA 17
390
1
PA 22
500
2
PA 32
731
2
PA 42
951
3
PA 62
1072
4
PA-F FRONT INTAKE PLENUM
L
245
L
216
A
8
200
A
Mod.
L [mm]
No. of intake blocks
PA 17 F
658
1 (A)
8
200
40
14
PA 22 F
768
1 (A)
8
40 1
4
216
216
B
8
245
216
PA 32 F
1039
2 (A+B*)
PA 42 F
1259
2 (A+B*)
PA 62 F
1381
2 (A+B)
B* = Closed intake mouth, to use it, remove the cut-out panel,in the plenum PA 42F used in combination with FCX
50/54 P - PO, the cut-out panel must be removed and the two intake mouths used.
46
ACCESSORIES
PM DELIVERY PLENUM
C
B
200
180
150
DIMENSIONS [mm]
PM
Mod.
PM 22
A [mm]
522
B [mm]
250
C [mm]
136
No. delivery outlet blocks 2
42
A
PM 42
973
320
166
3
PM 62
1094
270
142
4
English
140
PM 32
753
370
191
2
210
RDA STRAIGHT INTAKE CONNECTION
RPA 90° INTAKE CONNECTION
C
C
B
A
A
B
DIMENSIONS [mm]
Mod.
A
RDA 17
345
RDA 22
455
RDA 32
686
RDA 42
906
RDA 62
1027
B
180
180
180
180
180
C
60
60
60
60
60
DIMENSIONS [mm]
Mod.
A
RPA 17
345
RPA 22
455
RPA 32
686
RPA 42
906
RPA 62
1027
D
389
499
730
950
1071
RD STRAIGHT DELIVERED CONNECTION
B
150
150
150
150
150
C
389
499
730
950
1071
D
132
132
132
132
132
E
226
226
226
226
226
RP 90° DELIVERED CONNECTION
A
B
A
B
C
C
DIMENSIONS [mm]
Mod.
A
RD 17
345
RD 22
455
RD 32
686
RD 42
906
RD 62
1027
B
132
132
132
132
132
C
60
60
60
60
60
D
412
522
753
973
1094
E
149
149
149
149
149
DIMENSIONS [mm]
Mod.
A
RP 17
345
RP 22
455
RP 32
686
RP 42
906
RP 62
1027
B
156
156
156
156
156
C
412
522
753
973
1094
D
132
132
132
132
132
E
161
161
161
161
161
47
ACCESSORIES
SW3 MINIMUM WATER TEMPERATURE PROBE
English
RX ELECTRIC HEATER
2500 mm
Resistance heating power [W]
RX 17
700
RX 22
950
RX 32
1300
RX 42
1650
RX 50
1950
RX 62
2200
Current absorbed by the electric resistance[A]
RX 17
3,04
RX 22
4,13
RX 32
5,65
RX 42
7,17
RX 50
8,48
RX 62
9,57
SE FRESH AIR LOUVER
B
90
15
=
A
=
DIMENSIONS [mm]
Mod.
SE 15 X
SE 20 X
SE 30 X
SE 40 X
SE 80 X
A
436
546
777
997
1118
B
65
65
65
65
85
HANDLED FRESH AIR
Mod.
max
Air flow
med
min.
48
[m3/h]
[m3/h]
[m3/h]
FCX 17
40
35
30
FCX 22
60
50
40
FCX 32
80
70
50
FCX 42
100
80
65
FCX 50
140
115
90
FCX 62
180
160
120
FCX 82 FCX 102
220
250
190
210
150
170
ACCESSORIES
SIT3 - SIT5 INTERFACE CARDS
52
65
15
V1 V2 V3
OUTPUT
DIN
English
90
SIT 3
SIT 5
INPUT
V3 V2 V1 N N
PH L
SIT
3
SIT
3
Fan coil 1
Fan coil 1
SIT
5
SIT
3
Fan coil 2
SIT
3
Fan coil 3
SIT
3
Fan coil 2
SIT
3
Fan coil 3
SIT
3
SIT
3
Fan coil 4-10
Fan coil 4-10
Fan coils
49
TECHNICAL SPECIFICATIONS:
Power supply:
Start-up input power:
Operation input power:
Water temperature range:
Liquids
Operation time:
Maximum differential pressure:
Maximum work pressure applied to fan coil:
Environmental working condition
temperature:
relative humidity:
without condensation
Storaging environmental condition
temperature:
relative humidity:
without condensation
Actuator water protection degree:
230V (±10%) ~ 50Hz
46VA
2,5W
4°C ÷ 80°C
acqua (con glicole ≤ 50%)
2 min ÷ 4min
30kPa
800kPa
0°C ÷ 40°C
10% ÷ 90%
-18°C ÷ 60°C
10% ÷ 90%
Flow direction
IP44 acc.to EN 60529
A
Actuator electrical protection degree:
Classe II
Flow direction in the valve (see fig.)
with fed valve
with not fed valve
A - AB
B - AB
B
Valve attack [mm]
Mod.
A - AB - B
VCF 41
3/4”
VCF 42
3/4”
VCF 43
3/4”
VCF 44
1/2”
VCF 45
1/2”
Pressure drop
Mod.
Kvs AB-A
Kvs AB-B (by-pass)
VCF 41
2,5
1,6
VCF 42
2,5
1,6
VCF 43
2,5
1,6
VCF 44
1,7
1,2
VCF 45
1,7
1,2
Dp =
( (
10 q
Kvs
2
AB
OUT
IN
∆p [kPa] = Pressure drop
3
q [m /h] = Water flow rate
FAN COIL
VCF41
VCF42
for
FCX, FCS, FHX
VCF44
for
BV
VCF 44 (1/2”)
VCF 41 (3/4”)
VCF 42 (3/4”)
31
3/4”
166
1/2”
FAN COIL
100
46
54
38
37
102
40
VCF43
for
FCX, FCS, FHX
VCF45
for
BV
VCF 45 (1/2”)
VCF 43 (3/4”)
3/4”
179
1/2”
155
English
ACCESSORIES
VCF valve and BC4 drip tray can not be contemporary installed
on the same fan coil.
50
46
58
38
37
109
40
ACCESSORIES
167 mm
ZX 5-6 BASE SUPPORTS FOR HIGH CABINET
65 mm
B
[mm]
ZX 5
ZX 6
m
m
English
49
B
88
108
C
105
125
C
ZX 7-8 BASE SUPPORTS FOR HANGING VERSION
B
A
[mm]
ZX 7
ZX 8
A
20
20
B
88
108
C
199
199
C
51
ACCESSORIES
CONTROL PANELS WITH THERMOSTAT
PXAR
PXAE
+
-
+
English
-
PCT2
FMT20
FMT10
20 2
10
5
WARMER
COOLER
START/
STOP
WMT05
WMT10
CONTROL PANEL WITH SPEED SELECTOR SWITCH
PX2
52
ON OFF
C
30 °
15
WARNING: check that the power supply is disconnected before performing
operations on the unit.
WARNING: before carrying out any
interventions be prepared with suitable
I.P.D.
WARNING: The appliance must be
installed in compliance with national
system regulations.
WARNING: wiring connections installation of the fancoil and relevant accessories should be performed by a technician
who has the necessary technical and
professional expertise to install, modify,
extend and maintain plants and who is
able to check the plants for the purposes of safety and correct operation.
WARNING: Install a device, master
switch or plug that allows to completely
interrupt the appliances electric power
supply.
Here, find the indications essential for
correct installation of the appliances.
Leave processing of all operations to the
experience of the installer, according to
specific requirements.
The fan coil must be installed in a position such that the air can be distributed
throughout the entire room and there are
no obstacles (curtains or objects) to the
passage of the air from the intake grills.
The fan coil must be installed in a position such to allow easy routine (cleaning
the filter) and extraordinary maintenance, as well as access to the air vent valve
on the side of the frame (connections
side).
The installation must not constitute a
danger for persons.
If the 3-way VCF valve is installed, the
water probe SW must be replaced with
accessory SW3, whose bulb will be
applied on the delivery pipe upstream
from the valve.
The VCF valve and the basin BC4 cannot be installed at the same time on
the same fan coil.
Make the electric connections according to that stated in the wiring diagrams and in the “Electric connections” chapter.
To modify the settings of the electronic
thermostat act on the Dip-Switches
positioned inside the panel (see installation manual).
Re-mount the cover, without forgetting, that for models that have one,
to connect the room probe that must
project outwards by about 3mm from
the probe-holder and must be wellfixed using the relevant probe-block.
Re-position the air filter.
Check the correct functioning of the
fan and any accessories.
Some models with electronic thermostat, by means of the Autotest procedure, allow to check correct functioning. The function is described in the
manuals supplied with the unit.
Electric connections
The electric circuits are connected to the
mains voltage of 230V ~ 50Hz; all connections and components must therefore
be isolated for this voltage.
-
-
-
-
167 mm
UNIT INSTALLATION
The place of assembly must be selected
in a way that the maximum and minimum room temperature limit is respected 0÷45°C (<85% U.R.).
Follow the precautions given below
when installing the unit:
- In wall installation, maintain a minimum distance from the floor of 80
mm. In the case of floor installation
using skirting, refer to the instructions
supplied with the accessory.
- For wall fixing, use expansion plugs
(not supplied)
- Make the hydraulic connections.
The position and diameter of the
hydraulic connections are stated in the
dimensional data.
It is advised to suitably insulate the
water pipes or to install an auxiliary
condensate collection basin, available
as an accessory, in order to prevent
dropping during functioning in cooling
mode.
The condensate drain network must
be appropriately dimensioned and the
piping positioned in a way to maintain an adequate slope along the route
(min.1%). In case of draining into the
sewer system, it is recommended to
realise a siphon that prevents nasty
smells from returning towards the
rooms.
- Apply any accessories.
FEATURES OF THE CONNECTION
CABLES
Use cable type H05V-K or N07V-K with
300/500 V insulation recessed in a pipe or
channel. All cables must be recessed in a pipe
or channel until they reach the fan coil. The
cables exiting the pipe or channel must be
positioned in a way as not to undergo stress
from traction or twisting and, however, protected from external agents
For all connections, follow the wiring diagrams supplied with the appliance and stated
in this documentation.
To protect the unit against short circuits,
mount a magnet omnipolar switch 2A
250V (IG) on the power supply line with
a minimum opening distance of the contacts of 3mm.
Every control panel can control just one
fan coil.
WARNING: the probes have double
insulation as they are exposed to a voltage of 230Vac.
ZX
49
m
m
65 mm
B
B
B
A
A
A
53
English
INFORMATION FOR THE INSTALLATION
DIMENSIONS [mm]
FCX - A - ACB - ACT - AS
B
C
50
English
100
A
167 mm
50
100
49
m
m
65 mm
D
Mod.
FCX 17 FCX 22 FCX 32 FCX 42 FCX 50 FCX 62 FCX 82 FCX 102
A
563
563
563
563
563
688
688
688
B
640
750
980
1200
1200
1320
1320
1320
C
220
220
220
220
220
220
220
220
D
105
105
105
105
105
125
125
125
Peso * [kg]
13
15
20
24
24
34
34
34
* Fan coil weight without feet
FCX - U
B
C
C
B
A
A
Mod. 17 - 22 - 32 - 42 - 50
50
Mod. 62 - 82 - 102
50
100
Mod.
54
FCX 17 FCX 22 FCX 32 FCX 42 FCX 50 FCX 62 FCX 82 FCX 102
A
520
520
520
520
520
590
590
590
B
640
C
220
750
980
1200
1200
1320
1320
1320
220
220
220
220
220
220
220
Weight [kg] 13
15
20
24
24
34
34
34
DIMENSIONS [mm]
3R
A
B
30
96
216
60
85
388
Øe 17,5
453
453
144
197
49
25
30
216
41 101
45
9 x 20
3R+1R
50
C
50
FCX 62 - 82 - 102
64 - 84
3R
A (FCX-P)
216
41 107
B
14
216
60
96
350
Øe 17,5
141
558
558
253
248
32
110
14
39
9 x 20
3R+1R
C
FCX P - PO
Mod.
FCX 17
FCX 22
FCX 24
FCX 32
FCX 34
FCX 42
FCX 44
FCX 50
FCX 54
FCX 62
FCX 64
FCX 82
FCX 84
FCX 102
A
[mm] 452
562
793
1013
1013
1147
1147
1147
B
[mm] 412
522
753
973
973
1122
1122
1122
C
[mm] 330
440
671
891
891
1102
1102
1102
COIL CONNECTIONS
Mod.
FCX 17
FCX 22
FCX 32
FCX 42
FCX 50
FCX 62
FCX 82
FCX 102
3R
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
3/4”
3/4”
1R
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
FCX 24
FCX 34
FCX 44
FCX 54
FCX 64
FCX 84
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Mod.
4R
55
English
FCX 17 - 22 - 32 - 42 - 50
24 - 34 - 44 - 54
DIMENSIONS [mm]
Installation with AMP supports (accessories)
FCX-U 17 - 22 - 32 - 42 - 50
258
117
258
English
48
FCX-U 62 - 82 -102
FCX-P 17 - 22 - 32 - 42 - 50
24 - 34 - 44 - 54
105
258
36
100
min.
FCX-U 62 - 82 -102
64 - 84
100
min.
5
258
5
FCX A - U - P
A
C
D
E
24x9
B
G
F
Mod. FCX 17 FCX 22 FCX 32 FCX 42 FCX 50 FCX 62 FCX 82 FCX 102
FCX 24 FCX 34 FCX 44 FCX 54 FCX 64 FCX 84
A
640
750
981
1201
1201
1322
1322
1322
B
445
555
786
1006
1006
1127
1127
1127
C
490
600
831
1051
1051
1172
1172
1172
D
95,5
95,5
95,5
95,5
95,5
95,5
95,5
95,5
E
54,5
54,5
54,5
54,5
54,5
54,5
54,5
54,5
F
144,5
144,5
144,5
144,5
144,5
144,5
144,5
144,5
G
103,5
103,5
103,5
103,5
103,5
103,5
103,5
103,5
In case of inversion hydraulic connections, invert D with E, F with G
56
DIMENSIONS [mm]
3 AND 4- ROW COILS
FCX 62 ÷ 102
64 ÷ 84
OUT
OUT
41
41
142
IN
148
194
m
m
108
88
49
170
273
167 mm
153
260
194
Øe 17,5
526
404
Øe 17,5
IN
English
FCX 17 ÷ 50
24 ÷ 54
65 mm
Mod.
Coil connections (female)
Mod.
Coil connections (female)
FCX 17
FCX 22
FCX 32
FCX 42
FCX 50
FCX 62
FCX 82
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
3/4”
FCX 24
FCX 34
FCX 44
FCX 54
FCX 64
FCX 84
3/4”
3/4”
3/4”
3/4”
3/4”
FCX 102
3/4”
3/4”
For FCX - U versions do not consider the foot
DIRECT EXPANSION COIL
DIMENSIONS [mm]
Mod.
A
FCX 22÷50
FCX 62-102
400
522
B
408
530
Ø1
9,52
9,52
Ø2
12
16
Cooling connections on all FCX models fitted with
direct expansion coil (FCX - UE, FCX - PE) are located
on the right side of the unit; the control panel must
therefore be positioned on the left side. The coil cannot be rotated on these models..
57
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
LEGENDA • READING KEY • LEGENDE • LEGENDE • LEYENDA
AL = Alimentatore 12V
Power supply 12V
Alimentation electrique 12V
Spannung 12V
Alimentador
MV = Motore ventilatore • Fan motor
Moteur ventilateur • Ventilatormotor
Motor del ventilador
PE = Collegamento a terra
GND Earth connection
Mise à terre
Erdanschluss
Toma de tierra
RE = Resistenza elettrica • Electric heater
RX = Résistance électrique • Elt. Heizregister
Resistencia eléctrica
CN = Connettore
Connector
Connecteur
Schütz
Conector
SA = Sonda ambiente • Room sensor
Sonde ambiante • Raumtemperaturfuhler
Sonda ambiente
SC = Scheda di controllo
Electronic control board
Platine de contrôle • Steuerschaltkreis
Tarjeta electrónica de control
CRE= Contattore resistenza elettrica
Electric heater contactor
Contacteur résistance eléctrique
El. Heizregister-Schutz
Contactor de la resistencia eléctrica
F
SW = Sonda minima temperatura acqua
Water low temperature sensor
Sonde minimum temp. eau
Wasserfühler
Sonda temperatura mínima del agua
= Fusibile • Fuse • Fusible
Sicherung • Fusible
IG = Interruttore generale • Main switch
Interupteur général • Hauptschalter
Interruptor general
TR = Trasformatore • Transformer
Transformateur
Transformator • Transformador
M = Morsettiera • Terminal board
Boitier • Klemmleiste
Placa de bornes
TSR = Termostato a riarmo automatico
Automatic resetting thermostat
Thermostat à réarmement automatique
Thermostat automatischer Entriegelung
Termostato de rearme automático
ML = Motore aletta
Louvre motor
Moteur deflecteur
Motor- Umlenkklappe
Lamas motorizadas
TSRM= Termostato a riarmo manuale
Manual resetting thermostat
Thermostat à réarmement manuel
Thermostat manueller Entriegelung
Termostato de rearme manual
MS = Microinterruttore griglia
(Solo per i modelli che ne sono provvisti)
Louvre microswitch
(Only for the appropriate models)
Micro-interrupteur grille
(Uniquement pour les modèles qui en sont fournis)
Mikroschalter Gitter
(Nur bei Modellen, die damit ausgestattet sind)
Microinterruptor de la rejilla de impulsión
(Sólo para los modelos que lo incluyen)
= Componenti non forniti
Components not supplied
Composants non fournis
Nicht lieferbare Teile
Componentes no suministrados
= Componenti forniti optional
Optional components
Composants en option
Optionsteile
Componentes opcionales
= Collegamenti da eseguire in loco
On-site wiring
Raccordements à effectuer in situ
Vor Ort auszuführende Anschlüsse
Cableado in situ
AR = Arancio • Orange • Orange • Orange • Naranja
BI = Bianco • White • Blanc • Weiss • Blanco
BL = Blu • Blue • Bleu • Blau • Azul
GR = Grigio • Grey • Gris • Gray • Gris
MA = Marrone • Brown • Marron • Braun • Marrón
NE = Nero • Black • Noir • Schwarz • Negro
RO = Rosso • Red • Rouge • Rot • Rojo
VE = Verde • Green • Vert • Grün • Verde
VI = Viola • Violet • Violet • Violet • Violeta
VCF=Valvola solenoide • Solenoid valve
Vanne solenoide • Magnetventil
Válvula solenoide
VC = Valvola solenoide caldo
Solenoid valve hot
Vanne magnétique chaud
Magnetventil Heizbetrieb
Válvula solenoide para calor
MIN. VEL. - RO
MED. VEL. - MA
COMUNE - BL
MAX. VEL. - NE
SCHEMA DI COLLEGAMENTO MOTORE FCX - PO • FCX - PO MOTOR CONNECTION DIAGRAM
SCHEMA DE RACCORDEMENT MOTEUR FCX - PO • ANSCHLUSSPLAN MOTOR FCX - PO
ESQUEMA DE CONEXIONADO ELÉCTRICO DEL MOTOR FCX - PO
RO
AR
VE
BL
GI
GR
NE
BI
L 1 2 3 4 5 6 7
BL
English
CE = Contatto esterno
EX External contact
Contact extérieur
Externer Kontakt
Contacto externo
VF = Valvola solenoide freddo
Solenoid valve cold
Vanne magnétique froid
Magnetventil Kühlbetrieb
Válvula solenoide para frío
MA
Le velocità disponibili sono numerate da 1 a 7 in ordine decrescente di velocità
Available speeds are numbered from 1 to 7 following a speed decreasing order
Les vitesses disponibles sont numeratées de 1 à 7 en ordre de vitesse décroissante
Die verfügbaren Drehzahlen sind von 1 zu 7 mit abnehmender Drehzahlstufe numeriert
Las velocidades disponibles se numeran, en orden decreciente, de 1 a 7.
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
58
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
SC
T °C
SA
V1
V2
V3
Y1
Y2
L
PE
N
SW
ON/VEL
GR
ROS
AR AR
SA
10k
M
1
2
BI
GR
3
4
BL
5
6
MA
NE
7
8
9
RO
English
FCX - APC
10
1
2
3
4
6
5
1
2
3
4
6
NE
BL NE MA RO
ROS
1
BL
M
MV
1 3 5 6 7
PE
N
L
C L U S T E R
IG
230V ~ 50Hz
BL
L
N
Y N
MAX
VCF
10k
5
MIN
SW
MED
BL NE MA RO
FCX - ACT
SC
V1
V2
V3
Y1
L
PE
N
SA
GR
SW
BL
AR
MA
NE
BI
RO
PE
AR
M
4
5
6
7
8
SA
SW
5
1
2
3
4
6
5
1
2
3
4
6
BL
VC/F
NE MA RO
MV
~1
Sez. 1,5 mm2
IG 2A L
9 10
MIN
3
MED
2
MAX
1
N
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
59
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX - A
SC
3
4
5
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
2
6
MAX
M 1
FCX
MED
English
1
2
3
4
5
6
NE
BL
10
MA
1
M
RO
M
MV
PE
Sez. 1,5 mm2
N
L
IG
230V ~ 50Hz
FCX - ACB
SC
N
N
PE
L
Y1
V3
V2
V1
M1
M2
DL1
2
3
4
5
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
1
6
MAX
M
MED
PT1
BL
VCF
NE
10
MA
1
INT
EXT
JP1
SA
SA
RO
M
MV
PE
Sez. 1,5 mm2
N
L
IG
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
60
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX - AS
FCX - P
FCX - U
FCX - U
(escluso 62 - 82 - 102) Universale senza comandi
(except 62 - 82 - 102) Universal, without controls
(esclus 62 - 82 - 102) Universel sans commandes
(ohne 62 - 82 - 102) Universalgerät ohne Steuerungen
(excluidos 62 - 82 - 102) Universal sin panel de
mandos
(solo 62 - 82 - 102) Universale senza comandi
(62 - 82 - 102 only) Universal, without controls
(seulement 62 - 82 - 102) Universel sans commandes
(nur 62 - 82 - 102) Universalgerät ohne Steuerungen
(sólo 62 - 82 - 102) Universal sin panel de mandos
6
M 1
FCX
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
NE
BL
Sez. 1,5 mm2
10
MA
1
2
3
4
5
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
5
MED
4
6
MAX
3
MIN
2
MED
1
MAX
M
FCX
RO
BL
NE
Sez. 1,5 mm2
M
English
MS
MV
10
MA
1
RO
M
MV
IG
IG
PE
L N
230V ~ 50Hz
L N PE
230V ~ 50Hz
FCX U*
PXLM
2 tubi pannello PXLM a muro
2 tubes PXLM wall-mounted panel
2 tuyaux panneau PXLM inst. murale
2 Röhren Platte PXLM an Wand
2 tubos panel PXLM mural
NE
BI
BL
GI
RO
EX
AL
M2 12Vdc
2
3
4
5
6
Sez. 1,5 mm2
L
N
M1
1
2
3
4
5
CN1
EX
EX
M3
12V
GND
8
9
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
BL
NE
1
IG
PE
L N
230V ~ 50Hz
10
MA
M4
SA
SW
7
BL
MIN
1
0
MAX
M
FCX
230
BL
MED
M1
M2
SA
SA
SW
SW
GND
GR
V1
V2
V3
* termostato elettronico ed alette motorizzate
con FCX - U (escluso 62 - 82 - 102)
* electronic thermostat and motorized fins
with FCX - U (62 - 82 - 102 excluded)
RO
* thermostat électronique et ailettes motorisees
M
avec FCX - U (esclus 62 - 82 - 102)
MV
12345
ML
* elektronischer Thermostat mit Motorbetriebenen Lamellen
mit FCX - U (ohne 62 - 82 - 102)
* termostato electrónico y lamas motorizadas
con FCX - U (excluidos 62 - 82 - 102)
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
61
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
FCX
PX2
PXBI + VCF
commutatore a distanza
remote switch
commutateur à distance
Fernumschalter
conmutador remoto
2 tubi pannello PXBI a bordo macchina
2 tubes PXBI panel on board machine
2 tuyaux panneau PXBI sur l'appareil
2 Röhren Platte PXBI am Gerät
2 tubos panel PXBI en el equipo
PXBI
MS*
MS*
N
N
PE
L
Y1
V3
V2
V1
MS*
1
2
3
4
5
6
MS*
M1
5
6
M 1
FCX
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
BL
NE
10
MA
1
2
3
4
5
6
M
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
4
MAX
3
MIN
2
MED
M 1
FCX
MED
M2
MAX
NE
BL
VCF
MA
1
RO
DL1 EXT
SA
M
RO
M
M
MV
PE
Sez. 1,5 mm2
MV
PE
Sez. 1,5 mm2
INT
JP1
10
N
L
N
IG
L
230V ~ 50Hz
IG
230V ~ 50Hz
FCX
PTI + VCF
MS*
2 tubi pannello PTI a bordo macchina
2 tubes PTI panel on board machine
2 tuyaux panneau PTI sur l'appareil
2 Röhren Platte PTI am Gerät
2 tubos panel PTI en el equipo
PTI
V1
V2
V3
Y1
L
PE
N
SA
MS*
SW
GR
1
BL
NE
MA
RO
BI
2
3
4
5
7
8
9
10
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
M
FCX
AR
MED
AR
6
SA
SW
MAX
English
PX2
VCF
Sez. 1,5 mm2
BL
NE
MA
1
RO
M
MV
IG 2A
PE
L N
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
62
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
PXAE + VC + VF
4 tubi pannello PXAE a muro
4 tubes PXAE wall-mounted panel
4 tuyaux panneau PXAE inst. murale
4 Röhren Platte PXAE an Wand
4 tubos panel PXAE mural
MAX 15m
PXAE
M1
N
L
CE
MS*
MAX 100m
M
FCX
1
2
3
4
5
6
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
SW
SW
NE
MA
1
EXT
MAX 15m
MIN
MED
MAX
BL
VC
+
10
SW
VF
-
English
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
SA (INT)
JP1
INT
RO
M
MV
PE
Sez. 1,5 mm2
N
230V ~ 50Hz
L
IG
FCX
PXAE + VCF
2 tubi pannello PXAE a muro
2 tubes PXAE wall-mounted panel
2 tuyaux panneau PXAE inst. murale
2 Röhren Platte PXAE an Wand
2 tubos panel PXAE mural
MAX 15m
PXAE
M1
N
L
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
CE
MAX 100m
3
4
5
6
7
8
9
BL
NE
MA
RO
SW
5
1
2
3
4
6
5
1
2
3
4
6
BL
VCF
NE
SW
SW
EXT
MAX 15
MIN
MA
1
+
10
MED
2
MAX
M 1
FCX
MS*
-
JP1
SA (INT)
INT
RO
M
MV
PE
Sez. 1,5 mm2
N
L
230V ~ 50Hz
IG
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
63
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
PXAI + VC + VF
4 tubi pannello PXAI a bordo macchina
4 tube PXAI panel on board machine
4 tuyaux panneau PXAI sur l'appareil
4 Röhren Platte PXAI am Gerät
4 tubos panel PXAI en el equipo
PXAI
M1
N
L
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
English
CE
1
2
3
4
5
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
M
FCX
MED
MS*
6
10
MAX
NE
BL
VC
MA
1
+
SA
SW
VF
-
SW
SW
SA (INT)
RO
M
MV
PE
2
Sez. 1,5 mm
N
L
IG
230V ~ 50Hz
FCX
PXAI + VCF
4 tubi pannello PXAI a bordo macchina
4 tube PXAI panel on board machine
4 tuyaux panneau PXAI sur l'appareil
4 Röhren Platte PXAI am Gerät
4 tubos panel PXAI en el equipo
PXAI
M1
N
L
CE
2
3
4
5
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MIN
1
6
10
SA
SW
MAX
M
FCX
MED
MS*
VCF
BL
NE
MA
1
M
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
-
+
SA
SA
SW
SW
SA (INT)
RO
M
MV
PE
Sez. 1,5 mm2
N
L
IG
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
64
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
PXAR + VF + RX
2 tubi pannello PXAR a muro
2 tubes PXAR wall-mounted panel
2 tuyaux panneau PXAR inst. murale
2 Röhren Platte PXAR an Wand
2 tubos panel PXAR mural
MAX 15m
PXAR
M1
N
L
CE
MS*
1
2
3
4
5
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
BL
NE
MA
1
RE
10
MED
MAX
VF
6
EXT
M
SA (INT)
JP1
INT
RO
M
MV
SA (EXT)
PE
TSR
N
CRE
L
SW
230V ~ 50Hz
IG
Sez. 1,5 mm2
TSRM
+
SA
SA
SW
SW
SW
MIN
M
FCX
-
English
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
RX
FCX
PXAR + VCF + RX
2 tubi pannello PXAR a bordo macchina
2 tube PXAR panel on board machine
2 tuyaux panneau PXAR sur l'appareil
2 Röhren Platte PXAR am Gerät
2 tubos panel PXAR en el equipo
PXAR
M1
N
L
CE
MS*
2
3
5
6
7
8
9
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MAX
VF
4
BL
RE
10
NE
MA
1
SA
SW
+
SA
SA
SW
SW
JP1
SA (INT)
INT
RO
M
MV
SA (EXT)
PE
TSR
N
CRE
SW
L
TSRM
RX
-
EXT
M
MIN
1
MED
M
FCX
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
Sez. 1,5 mm2
IG
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
65
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
FCX
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
4 tubi
4 tube
4 tuyaux
4 Röhren
4 tubos
KTLM/KTLP + VC + VF
OWE
C
O
O
L
R
P
KTLM/KTLP + VCF
H
E
A
T
IR receiver
UT
O
KTLM / KTLP
C
O
O
L
H
E
A
T
IR receiver
KTLM / KTLP
SC
TR
Room
Sensor
L1
Room
Sensor
L1
SC
TR
SA
L2 - N
GND
HEAT
GND
HEAT
F
10 A
L2 - N
F
10 A
COOL
COOL
FAN LOW
FAN LOW
VI
GR
Receiver
BI
FAN MED
BL
BI
VI
GR
FAN MED
BL
FAN HIGH
FAN HIGH
NE
NE
MA
MA
3
4
5
VCF
6
7
8
9
10
BL
NE
MA
RO
M
FCX
5
1
2
3
4
6
5
1
2
3
4
6
VC
N
MV
MA
1
230V ~ 50Hz
NE
MIN
MED
MAX
230V ~ 50Hz
3
VF
4
5
6
7
8
9
10
BL
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
IG 2A
BL
PE
2
M
IG 2A
L
1
MIN
2
MED
1
RO
RO
RO
M
L
MAX
M
FCX
Receiver
English
SA
BL
N
NE
MV
MA
1
M
RO
M
PE
FCX
WMT05
2
3
4
5
6
8
9
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
BL
NE
Sez. 1,5 mm2
L
IG
10
MA
1
RO
M
1234N
MV
N
PE
WMT05
7
BL
MIN
MS*
MAX
M 1
FCX
MS*
MED
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
66
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
WMT10 + VCF
MS*
2
3
4
5
6
8
9
NE
MA
RO
5
1
2
3
4
6
5
1
2
3
4
6
MAX
VCF
7
BL
MIN
M 1
FCX
MED
MS*
NE
BL
MA
L
English
HIGH
MED
LOW
HEAT
COOL
L2 - N
MV
N
IG
RO
M
Sez. 1,5 mm
PE
WMT10
Fan coil
L1~
2 1
10
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
230V ~ 50Hz
FCX
WMT10 + VF + VC
MS*
1
2
3
4
5
6
8
9
NE
MA
RO
1
2
3
4
6
5
1
2
3
4
6
NE
BL
4 tubi
4 tube
4 tuyaux
4 Röhren
4 tubos
RO
HIGH
MED
LOW
HEAT
COOL
M
L2 - N
L1~
1
Sez. 1,5 mm2
MV
L
N
IG
MA
WMT10
Fan coil
BL
VC
PE
10
5
MAX
VF
7
MIN
M
FCX
MED
MS*
230V ~ 50Hz
FCX
WMT10 + VF + RX
MS*
MS*
3
4
5
6
1
2
3
4
6
5
1
2
3
4
6
4
2
NE
NE
2
C
TSRM
L
HIGH
6
MED
N
NE
8
MV
PE
Sez. 1,5 mm2
F 2A
NE
RO
M
LOW
MA
1
HEAT
0
NE
Fan coil
COOL
BL
1
NE
RX
5
BL
RO
1
10
L2 - N
CRE
RO
C
BL
RO
9
MA
L1~
RO
8
NE
MAX
VF
7
BL
N
L
IG
230V ~ 50Hz
2
MIN
1
MED
WMT10
M
FCX
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
67
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
FMT10 + VCF
MS*
MS*
4
5
6
8
9
3
4
6
NE
English
BL
Sez. 1,5 mm2
MA
1
M
EXT. SENSOR
RO
HIGH
2
MED
6
1
LOW
4
5
HEAT
RO
3
COOL
MA
2
L2 - N
NE
1
L1~
BL
FMT10
(6m)
AIR
10
5
MAX
VCF
7
MIN
3
MED
2
M
MV
WARMER
C650 FS - 1C - 1H
M 1
FCX
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
OFF
ON
LOW MED HIGH
COOLER
L
PE
N
IG
230V ~ 50Hz
FCX
FMT10 + VF + VC
MS*
MS*
3
4
5
6
8
9
10
3
4
6
BL
VC
NE
MA
1
Sez. 1,5 mm2
M
EXT. SENSOR
RO
HIGH
2
MED
6
1
LOW
4
5
HEAT
RO
3
COOL
MA
2
L2 - N
NE
1
L1~
BL
FMT10
(6m)
AIR
5
MAX
VF
7
MIN
2
MED
1
M
MV
WARMER
C650 FS - 1C - 1H
M
FCX
4 tubi
4 tube
4 tuyaux
4 Röhren
4 tubos
OFF
ON
LOW MED HIGH
COOLER
L
N
IG
PE
230V ~ 50Hz
FCX
FMT10 + VF + RX
MS*
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
MS*
4
5
6
6
BL
0
NE
MA
1
F 2A
8
6
4
2
NE
NE
NE
2
C
TSRM
L
EXT. SENSOR
RO
M
MV
Sez. 1,5 mm
N
NE
M
HIGH
6
4
MED
4
3
LOW
3
2
HEAT
2
1
COOL
1
5
1
NE
RX
5
BL
RO
1
10
L2 - N
CRE
RO
C
BL
RO
9
MA
L1~
RO
8
NE
MAX
VF
7
BL
PE
2
N
L
IG
230V ~ 50Hz
3
MIN
2
MED
1
FMT10
(6m)
AIR
WARMER
C650 FS - 1C - 1H
M
FCX
OFF
ON
LOW MED HIGH
COOLER
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
68
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX
FMT20 + VCF
MS*
MS*
FMT20
6
8
9
4
6
NE
Sez. 1,5 mm2
1
RO
M
MV
L
N
IG
MA
M
N/C
3
HIGH
2
MED
6
1
LOW
4
5
HEAT
RO
3
COOL
MA
2
L2 - 0
NE
1
L1~
BL
BL
PE
10
5
MAX
VCF
7
English
5
MIN
4
MED
3
C650 FS - 1C - 1H
2
EXT. SENSOR
M 1
FCX
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
230V ~ 50Hz
FCX
FMT20 + VF + VC
MS*
MS*
FMT20
4
5
6
8
9
4
6
BL
NE
1
Sez. 1,5 mm2
RO
M
MV
L
N
IG
MA
M
N/C
3
HIGH
2
MED
6
1
LOW
4
5
HEAT
RO
3
COOL
MA
2
L2 - 0
NE
1
L1~
BL
VC
PE
10
5
MAX
VF
7
MIN
3
MED
2
C650 FS - 1C - 1H
1
EXT. SENSOR
M
FCX
4 tubi
4 tube
4 tuyaux
4 Röhren
4 tubos
230V ~ 50Hz
FCX
FMT20 + VF + RX
MS*
2 tubi
2 tube
2 tuyaux
2 Röhren
2 tubos
MS*
FMT20
5
6
4
6
BL
0
NE
MA
1
N
NE
6
4
2
NE
NE
NE
2
C
TSRM
RO
M
MV
PE
Sez. 1,5 mm2
F 2A
8
M
L
N/C
3
HIGH
2
MED
6
1
LOW
4
5
HEAT
RO
3
COOL
MA
2
1
NE
RX
NE
1
L2 - 0
CRE
BL
BL
RO
1
10
5
C
BL
RO
9
L1~
RO
8
MAX
VF
7
N
L
IG
230V ~ 50Hz
4
MIN
3
MED
2
C650 FS - 1C - 1H
1
EXT. SENSOR
M
FCX
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
69
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
FCX PPC
PXAE
M1
N
L
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
English
CE
M
1
2
3
4
5
6
7
8
9
BL
NE
MA
10
1
2
3
4
6
5
1
2
3
4
6
NE
BL
NE
MA
1
SW
SW
EXT
JP1
SA (INT)
INT
MIN
MED
MAX
Y N
ROS
L
N
5
BL
BL
+
RO
SW
VC/F
-
RO
M
MV
PE
1 3 5 6 7
N
L
C L U S T E R
IG
230V ~ 50Hz
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
70
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
+
FCX PPC
PXAE
English
JP1
EXT
L = 15m MAX
L = 100m MAX
SIT5
INPUT
CE
L PH N N V1 V2 V3 Y1 Y2
SW
L = 15m MAX
F 1A
INT
SW
SW
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
N
L
M1
PXAE
-
SA (INT)
SIT3 + SIT5
OUTPUT
V1 Y1 Y2
FC/ 1
MV
RO
MA
M
4
3
2
N
L
IG
C L U S T E R
BL
1 3 5 6 7
NE
BL
ROS
VC/F
4
3
MS
2
Y N
FC/ 2
MV
RO
MA
M
4
3
2
BL
1
5
5
1
1
6
4
3
2
NE
6
10
RO
9
MA
8
NE
6
SIT3/ 2
C L U S T E R
BL
1 3 5 6 7
NE
BL
VC/F
ROS
5
4
3
2
MS
1
Y N
L
N
M
N
N
FC/ 2
PH L
L
INPUT
V3 V2 V1 N
7
V3
MAX
V2
OUTPUT
MED
V1
MIN
F
2A
BL
M
N
1
L
FC/ 1
5
N
PH L
L
N
230V ~ 50Hz
BL
1
5
5
1
1
6
4
3
2
NE
6
10
RO
9
MA
8
NE
6
INPUT
V3 V2 V1 N
7
SIT3/ 1
V3
MAX
V2
OUTPUT
MED
V1
MIN
F
2A
BL
PE
V3 V2
MAX FC/10
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
71
SCHEMI ELETTRICI • WIRING DIAGRAMS • SCHEMAS ELECTRIQUES • SCHALTPLÄNE • ESQUEMAS ELÉCTRICOS
+
FCX AS
PXAE
EXT
INT
JP1
SW
SW
N
L
V1
V2
V3
Y1
Y2
CE
CE
MS
MS
L = 15m MAX
English
M1
Y2 Y1 V3 V2 V1 N N PH L
PXAE
-
SA (INT)
SIT3 + SIT5
F 1A
SIT5
INPUT
OUTPUT
V2 V3
FCX/1
RO
MA
M
1
L
N
230V ~ 50Hz
BL
MV
NE
4
3
6
4
3
2
2
1
5
6
1
5
6
10
RO
9
MA
8
7
6
BL
SIT3/1
MAX
F
2A
INPUT
N
PH L
4A
IG
VCH
4
FCX/2
RO
MA
M
1
MV
NE
4
3
BL
4
3
2
1
5
6
2
1
5
6
10
RO
9
MA
8
NE
7
6
SIT3/2
F
2A
INPUT
PH L
VCH
4
FCX/N
RO
MV
MA
M
1
4
3
NE
BL
4
3
2
1
5
2
1
5
10
RO
9
MA
8
NE
7
6
SIT3/10
F
2A
INPUT
PH L
VCH
4
M
1
2
3
MS
5
N
V3 V2 V1 N
MAX
V3
MIN
V2
OUTPUT
MED
V1
BL
M
1
2
3
MS
5
N
V3 V2 V1 N
MAX
V3
MIN
V2
OUTPUT
MED
V1
BL
M
1
2
3
MS
5
V3 V2 V1 N
MIN
V3
MED
V2
OUTPUT
NE
6
PE
Y2 Y1 V1
V1
Gli schemi elettrici sono soggetti ad un continuo aggiornamento, è obbligatorio quindi fare riferimento a quelli a bordo macchina.
All
wiring
diagrams
are
constantly
updated.
Please
refer
to
the
ones
supplied
with
the
unit.
Nos schémas électriques étant constamment mis à jour, il faut absolument se référer à ceux fournis à bord de nos appareils.
Die Schaltpläne werden ständig aktualisiert, deswegen muss man sich stets auf das mit dem Gerät gelieferte Schaltschema beziehen.
El cableado de las máquinas es sometido a actualizaciones constantes. Por favor, para cada unidad hagan referencia a los esquemas suministrados con la misma.
72
73
English
TROUBLE SHOOTING
PROBLEM
Feeble air discharge
PROBABLE CAUSE
Wrong speed setting on the control panel
SOLUTION
Select the speed on the control panel
Clean the filter
Blocked filter
Remove the obstruction
Ostruzione del flusso d’aria (entrata e/o uscita)
It does not heat
Control the boiler
Control the heating pump
See control panel settings
Poor hot power supply
English
Wrong setting on control panel
It does not cool
Poor chilled water supply
Control the chiller
See control panel settings
Wrong setting on control panel
Control the power supply
The fan does not turn
Check up the boiler or the chiller and/or their
setting
Check up the thermostat settings
The water has not reached operating temperature
Increase the water temperature beyond the
The water has not reached operating temperature
The limit conditions of temperature and humi- minimum limits indicated in “MINIMUM
dity indicated in “MINIMUM AVERAGE WATER AVERAGE WATER TEMPERATURE”.
TEMPERATURE” have been reached
No current
Condensation on the unit
cabinet
For anomalies don’t hesitate, contact the after sales service immediately.
MAINTENANCE
ROUTINE MAINTENANCE
Routime maitenance can be performed by
the user. It consists of a series of simple
operations that allow the facncoil to
operatore at its maximum performance.
Before carrying out any intervention
be sure that electrical power supply
is disconnected. Do nor remove the
shell or the electrical or mechanical
protections.
Interventions:
- External cleaning must be carried out
weekly. Use a wet rag (with water at max,
40°C temperature) and neutral detergent;
avoid other detergents or solvents. .
- Do not spray water in the external or
internal surfaces of the fancoil (short circuit coud occur) .
- Examination of the fancoil status at any maintenance intervention: any anomaly must be communicated to the After Sales dept.
EXTRAORDINARY MAINTENANCE
Only Aermec After Sales dept. or
personnel with all the technicalprofessional capacities for the
installation,transformation and
maintenance of the units and able
to verify them according to the safety
normes in force with particular reference
to electrical connections can carry out
the extraordinary maintenance. The
following verifications relating to the
above are requested:
- Measure of the electrical unit
insulatioon resistance.
- Continuity testo of the protection
conductors.
Extraordinary maintenance consists of a
series of complex operations that involve
the disassembling of the fancoil or its
Intervention:
- Internal cleaning with year frequence or before prolonged
period. In particular situation where an high level nof cleaning
is requetsed, it can be carried out more frequently. It consists in
the coil cleaning, fancoil fins, drip tray, ioniser and all the parts
in contact with the treated air. Moreover verify the status of the
filter, clean it and if necessary replace it.
For cleaning do nou use jets or water spray..
74
components. Thanks to this operation
the maximum efficency condition for the
bfan coil functioning is restored.
Before any intervention, be sure
electrical power supply is disconnected.
Use a small brush to remove possible dust deposit.
- For repairing or setting operation, consult the TROUBLE AND
SHOOTING chapter before contact the After Sales dept.
75
Aermec partecipa al Programma di Certificazione EUROVENT. I prodotti interessati figurano nella Guida EUROVENT dei Prodotti Certificati.
Aermec is partecipating in the EUROVENT Certification Programme. Products are as listed in the EUROVENT Directory of Certified Products.
Aermec partecipe au Programme de Certification EUROVENT. Les produits figurent dans l’Annuaire EUROVENT des Produits Certifiés.
Aermec ist am Zertifikations - Programm EUROVENT beteiligt. Die entsprechend gekennzeichneten Produkte sind im EUROVENT - Jahrbuch aufgefürt.
AERMEC S.p.A. participa en el programa de certificación EUROVENT. Sus equipos aparecen en el directorio de productos certificados EUROVENT.
I dati tecnici riportati nella presente documentazione non sono impegnativi.
AERMEC S.p.A. si riserva la facoltà di apportare in qualsiasi momento tutte le modifiche ritenute necessarie per il miglioramento del prodotto.
Les données mentionnées dans ce manuel ne constituent aucun engagement de notre part. Aermec S.p.A. se réserve le droit de modifier à tous moments les
données considérées nécessaires à l’amelioration du produit.
Technical data shown in this booklet are not binding.
Aermec S.p.A. shall have the right to introduce at any time whatever modifications deemed necessary to the improvement of the product.
Im Sinne des technischen Fortsschrittes behält sich Aermec S.p.A. vor, in der Produktion Änderungen und Verbesserungen ohne Ankündigung durchzuführen.
ILos datos técnicos indicados en la presente documentación no son vinculantes.
Aermec S.p.A. se reserva el derecho de realizar en cualquier momento las modificaciones que estime necesarias para mejorar el producto.
AERMEC S.p.A.
I-37040 Bevilacqua (VR) - Italia
Via Roma, 44 - Tel. (+39) 0442 633111
Telefax (+39) 0442 93730 - (+39) 0442 93566
www.aermec.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement