STF04E_Salton elite tower fan

STF04E_Salton elite tower fan
Congratulations on purchasing our Salton Elite Tower Fan. Each unit is manufactured to
ensure safety and reliability. Before using this appliance for the first time, please read the
instruction manual carefully and keep it for future reference.
The Salton Elite Tower Fan has 3 speed settings to suit any cooling requirement.
The 90˚ oscillation function ensures that the whole room is cooled.
The Salton Elite Tower Fan has a built-in 120 minute timer that switches the unit off
after the preset period of time.
The stylish modern design will suit any décor.
The sturdy round base ensures the unit is stable and safe to use.
The tower fan has a built-in carry handle to make mobility easy and convenient.
The Salton Elite Tower Fan uses a powerful 60w motor for fast and effective cooling.
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. Please read these instructions carefully before using this appliance.
2. Always ensure that the voltage on the rating label corresponds to the mains voltage in
your home.
3. Incorrect operation and improper use can damage the appliance and cause injury to
the user.
4. The appliance is intended for household use only. Commercial use invalids the
warranty and the supplier can not be held responsible for injury or damage caused
when using the appliance for any other purpose than that intended.
5. Avoid any contact with moving parts.
6. Close supervision is required when any appliance is used near or by children or
7. Check the power cord and plug regularly for any damage. If the cord or the plug is
damaged, it must be replaced by the manufacturer or a qualified person in order to
avoid an electrical hazard.
8. Do not use the appliance if it has been dropped or damaged in any way. In case of
damage, take the unit in for examination and/or repair by an authorised service agent
9. To reduce the risk of electric shock, do not immerse or expose the motor assembly,
plug or the power cord to water or any other liquid.
10. Never immerse the unit in water or any other liquid for cleaning purposes.
11. Remove the plug from the socket by gripping the plug. Do not pull on the cord to
disconnect the appliance from the mains. Always unplug the unit when not in use,
before cleaning or when adding or removing parts.
12. The use of accessory attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.
13. A short cord is provided to reduce the hazards resulting from becoming entangled in or
tripping over a longer cord.
14. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is
not in a position where it can be pulled on inadvertently.
15. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or
electric burner or in a heated oven.
16. Do not use the appliance on a gas or electric cooking top or over or near an open
17. Use of an extension cord with this appliance is not recommended. However, if it is
necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the appliance to avoid overheating of the extension cord, appliance or
plug point. Do not place the extension cord in a position where it can be pulled on by
children or animals or tripped over.
18. This appliance is not suitable for outdoor use. Do not use this appliance for anything
other than its intended use.
19. DO NOT carry the appliance by the power cord.
20. Do not leave this appliance unattended during use. Always unplug the unit when not in
use or before cleaning.
21. Always operate the appliance on a smooth, even, stable surface. Do not place the unit
on a hot surface.
22. Ensure that the switch is in the “Off” position after each use.
23. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
24. In case of technical problems, switch off the machine and do not attempt to repair it
yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to comply
with the above mentioned pre-cautions and instructions, could affect the safe operation
of this machine.
1. Lay the fan down, with the front grill and control panel facing up.
2. Assemble the base of the fan by interlocking the guides on base A with base B,
ensuring the power cord is threaded through the large hole in the centre of the bases.
See Figure 1.
3. Secure the four short screws supplied into the four holes in a row at the bottom of the
base. See Figure 2.
4. Align the base with the fan, and secure using the four long screws supplied. Ensure
that the power supply cord is tightly routed to the back of the base, and secure the
cord under the Wire locating trough at the back of the base next to the power supply
cord exit hole.
5. Check that all screws are secured tightly, and place the fan on its base. The Tower
Fan is now ready for use.
1. Place the fan on a clean, dry, stable surface.
2. Ensure the buttons are all raised by pressing the “0” button. Turn the timer to the “0”
3. Plug the unit into the wall socket and switch on the wall socket.
4. Press the relevant button to select the desired fan speed, as follows:
“1” for slow
“2” for medium
“3” for fast
5. Turn the rotary timer control to “ON”. The fan will now turn on to the speed selected.
6. To use the timer, turn the timer in a clockwise direction until the desired time is
reached. The fan will now work for the time selected, and will switch itself off once the
time is finished.
7. To use the oscillation function, use the button located below the rotary timer control.
Push the button to the down to turn the oscillation function on. The button will stay in
the down position. To turn the oscillation off, push the button down again. The button
will now remain up.
8. After use, turn the fan off by pressing the “0” button. This will stop the fan, the
oscillation and the timer. Turn the wall socket off as well, and then unplug the fan from
the wall socket.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and
before cleaning. Ensure that the fan is set to “0”.
The body of the appliance should be cleaned with a damp cloth. Do not let water
enter the appliance.
Do not use bleach or other abrasive substance or solvents to clean your appliance
as it can be damaging to the finish.
Do not immerse the appliance in water or any other liquid, or hold it under a
running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened
in soapy water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth.
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
There are no user serviceable parts in this appliance. If the unit is not operating correctly,
please check the following:
• You have followed the instructions correctly
• That the unit has been wired correctly and that the wall socket is switched on.
• That the mains power supply is ON.
• That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:
• The unit is packed carefully back into its original packaging.
• Proof of purchase is attached.
• A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Amalgamated Appliance
(Pty) Ltd service centre. Servicing outside the warranty period is still available, but will,
however, be chargeable.
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on 220V-240V current only. Connecting to other
power sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
= Neutral
= Live
Amalgamated Appliances (Pty) Limited (“the Supplier”) warrants to the original purchaser
of this product (“the Customer”) that this product will be free of defects in material and
workmanship which under normal, personal, family or household purpose manifest
themselves within a period of 365 days from the date of purchase or in respect of
commercial or professional purposes, manifest themselves within a period of 90 days from
the date of purchase. Any claim in terms of the warranty must be supported by a proof of
purchase. If such proof is not available, then notwithstanding anything to the contrary
herein, the Supplier’s normal charge for service and/or spares will be payable by the
Customer upon collection of the repaired product. If a claim is made in terms of the
aforesaid warranty within the first 7 days from the date of purchase, the faulty product will
be exchanged (provided that the product is in its original packaging with all accessories).
Failing return of the product within 7 days, the Supplier’s liability shall be limited on return
to the Supplier of the product or parts thereof, to the replacement or repair (in the sole
discretion of the Supplier, or its duly authorised service dealer) of the product to eliminate
any defect in workmanship or materials found to be due exclusively to any acts or
omissions on the parts of the Suppliers, of which defects the Supplier shall have been
notified in writing by the Customer within the aforesaid warranty period. The warranty
provided herein and the obligations of the Supplier as aforesaid are in lieu of, and the
Customer waives, all other warranties, guarantees, conditions or liabilities, express or
implied, arising by law or otherwise, including without limitation, any obligation of the
Supplier in respect of any injury, loss or damage (direct, indirect or consequential) arising
out of the use of, or inability to use, this product and whether or not occasioned by the
Supplier’s negligence (gross or otherwise) or any act or omission on its part. The warranty
does not include and will not be construed to cover products damaged as a result of
disaster, misuse, abuse or any non-authorised modification of the product. The warranty
does not include replacement of light bulbs, heater bars, paper bags or any glass, plastic
bowl or jug or other expendables. During the warranty period the product should be taken
to a service centre of the Supplier or one of its duly authorised service agents. The
Supplier neither assumes nor authorises any other person to assume for it, any additional
liability in connection with the sale or servicing of its products.
P O BOX 39186
TEL NO. (011) 490-9000
TEL NO. (021) 535-0600
TEL NO. (031) 792-6000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF