OCC-FO Connectivity.indd

FIBER OPTIC CONNECTIVITY
FIBER OPTIC CONNECTIVITY
FIBE R
O P TI C
C O N N E C T I V I T Y
CONTENTS:
As an alternative to traditional copper structured wiring
FC 2
Wall Mount
Enclosures
solutions, Optical Cable Corporation designed the
Rack Mount
Enclosures
product set to meet the demands of one of the fastest
FC 11
Pre-terminated
Enclosures
line provides a wide range of fiber distribution solutions from
FC 12
Fiber Accessories
– Splice Trays,
Connectors, etc.
FC 5
FC 14
Zone Distribution
FC 15
Adapter Plates
and Cassette
Modules
FC 19
Jumpers and
Cable Assemblies
FC 21
Fibreguard
Closures
FiberOpticx™ product line to offer customers a complete
growing network markets today. The FiberOpticx™ product
the telecommunication closet to the building entrance to the
main equipment room. Within this
product set, customers have
discovered a cost effective
solution offering quality,
performance, and flexibility.
As fiber optic cabling needs have
increased due to throughput
demands, Optical Cable
Corporation has continuously
developed fiber solutions that are
designed to last a lifetime. All
fiber connectivity components
offer quality manufacturing
coupled with Optical Cable Corporation’s trademark
enthusiasm towards engineering perfection. Add in the
flexibility of customized solutions and Optical Cable
Corporation’s FiberOpticx™ interconnect products are a
guaranteed solution.
WALL MOUNT ENCLOSURES
FC 2
| FIBER OPTIC CONNECTIVITY
Wall Mount Enclosures
Optical Cable Corporation’s FiberOpticx™ Wall Mount Cabinets (WTC)
provide a solid foundation for any fiber optic application with features like
integrated fiber management and easy cable distribution. Each cabinet may
be ordered empty or loaded to meet exact specifications. Every WTC
cabinet easily accommodates all cross-connect
functions including splicing, termination and
interconnects for outside plant backbone and
building cables. The WTC series enclosures
are scalable, modular and constructed for
durability and with Optical Cable
Corporation’s variety of adapter plates,
cassette modules and splicing features, the
application options are endless.
WTC72x
WTC48x
WTC12/24x
• Constructed of 16 gauge steel with durable powder coat finish
• Accommodates Optical Cable Corporation snap-in adapter plates and
cassette modules
• Removable hinged door provides easy front access and lockable hasp
• Two-tier fiber storage hoops designed to maintain orderly fiber management
• Top and bottom accesses have cable tie-downs/strain relief and full grommets
• Lockable inner door is removable and can be used as a work surface by
inserting the tabs into slots provided at the bottom frame of the cabinet
• Port identification sheets are included
WTC144x
• All WTC Series enclosures meet NEMA 12 rated requirements
• Mounting hardware included
• Available in Almond or Black
FiberOpticx™ Wall Mount Cabinets (Empty)
Port
Capacity
Adapter
Plates
WMC12A – (Available in Almond only)
12
WTC12/24x – (2 blank plates included for 12 port applications)
24
WTC48x
WTC72x
Catalog Number
WSV72x – (Splice cabinet)
WTC144x
WSV288x – (Splice cabinet)
Splice
Capacity
Splice
Trays/Kits
2
-
-
11 x 7 x 3
4
24
-
13 x 12 x 3.5
48
8
48
W48S
13 x 5 x 17 x 5.5
72
12
72
W72S
17 x 12 x 11
-
-
72
W72S
17 x 8.14 x 4
144
24
144
W144S
23 x 17 x 11
-
-
288
W288S
23 x 17 x 11
*“x” denotes cabinet color; Replace with A for Almond or B for Black
** Port capacity based on standard 6-pack adapter plates
Optical Cable Corporation reserves the right to change this specification without prior notification.
Box Dimensions
WALL MOUNT ENCLOSURES
FIBER OPTIC CONNECTIVITY |
Optical Cable Corporation’s OC Series Wall
Mount Enclosures offer the same modular
features of the WTC series with the added
outdoor durability for outside plant
functionality. The OC series, like all Optical
Cable Corporation Wall Mount cabinets can
be ordered empty or can be easily
customized to fit any exact specification. For
NEMA 4 requirements, the OCO48 cabinets
offer ideal protection from the outdoor
elements. For smaller OSP and inside
premise applications the new OCO6N and
OCO12N are a perfect fit with the additional
benefit of being NEMA Type 3 compliant.
FC 3
OCO48N
• OCO Enclosures accommodate snap-in adapter plates
and cassette modules
• Lockable hasp ideal for any combination padlock
OCWS864x
• Fiber storage hoops designed to
maintain orderly fiber management included
• Port identification sheets are included
• Mounting hardware included
FiberOpticx™ Outside Wall Mount Cabinets (Empty)
Catalog Number
Port Capacity
Adapter Plates
Splice Capacity
Splice Trays/Kits
Box Dimensions
OCO48N
48
8
-
-
14.5 x 16.5 x 6.1
OCO48NS
48
8
48
W48S
14.5 x 16.5 x 6.1
OCWS864X
-
-
144
W144S
24 x 36 x 15
OCO6N
6
1
12
-
10.3 x 7.7 x 3.1
OCO6NS
6
1
6
Splice Block
10.3 x 7.7 x 3.1
OCO12N
12
2
-
-
10.3 x 7.7 x 3.1
OCO12NS
12
2
12
Splice Block
10.3 x 7.7 x 3.1
* “x” denotes cabinet color; Replace with A for Almond or B for Black
FiberOpticx™ OCO6N Accessories:
Catalog Number
Descriptions
10801301
3/4" Conduit Adapter for OCO6N
10801201
1" Conduit Adapter for OCO6N
Optical Cable Corporation reserves the right to change this specification without prior notification.
WALL MOUNT ENCLOSURES
FC 4
| FIBER OPTIC CONNECTIVITY
Wall Mount Splice Kits
FiberOpticx™ Wall Mount Splice Kits
Optical Cable Corporation offers user friendly Wall Mount
splice kits for all applications. All Optical Cable Corporation
splice kits are injection-molded and have hinged, clear
plastic covers for fiber visibility and maximum protection.
Tabs along the tray’s side allow for easy fiber routing and all
Optical Cable Corporation splice kits are available for
smaller fiber capacities.
• All kits include transition trays for cable
management and radius control
Catalog Number
Description
10419901
Splice Tray for 12 Fiber splices
8003469
Splice Tray for 24 Fiber splices
W12RT
Wall Mount Splice Kit for WTC12/24x Cabinet,
12 Fiber Splice Tray
W24PT
Wall Mount Splice Kit for WTC12/24x Cabinet,
24 Fiber Splice Tray
W48S
Wall Mount Splice Kit for 48 Fiber splices
W48RS
Wall Mount Splice Kit, Ribbon Tray,
for 48 Fiber splices
W48TS
Wall Mount Splice Kit, Thin Tray,
for 48 Fiber splices
W72S
Wall Mount Splice Kit for 72 Fiber splices
W72RS
Wall Mount Splice Kit, Ribbon Tray,
for 72 Fiber splices
W72TS
Wall Mount Splice Kit, Thin Tray,
for 72 Fiber splices
W144S
Wall Mount Splice Kit for 144 Fiber splices
W144RS
Wall Mount Splice Kit, Ribbon Tray,
for 144 Fiber splices
W144TS
Wall Mount Splice Kit, Thin Tray,
for 144 Fiber splices
W288S
Wall Mount Splice Kit for 288 Fiber Splices
• Tubing for transporting buffered fibers safely
• Accessories for adapting the trays into the cabinets
• Felt strips and cable ties for securing and strain relieving
buffered fibers
Optical Cable Corporation reserves the right to change this specification without prior notification.
RACK MOUNT ENCLOSURES
FIBER OPTIC CONNECTIVITY |
FC 5
Rack Mount Enclosures
Optical Cable Corporation’s FiberOpticx™ Rack Mount
Cabinets (RTC) apply integrated fiber management into a
convenient rack mountable solution. Whether ordering
empty or loaded for a customized application, the RTC
series enclosures deliver rugged durability with the
convenience of one source distribution. Each RTC may be
mounted to either a 19" or 23" rack or enclosure and can
easily accommodate all cross-connect functions including
splicing and termination.
RTC18x
RTC36x
• Constructed of 16-gauge steel with durable
powder-coat finish
• Accommodates Optical Cable Corporation snap-in
adapter plates and cassette modules
• High Density patch & splice
• Front and rear locking options available
• Two-tier fiber storage hoops designed to maintain orderly
fiber management included
RTC72x
• Full rubber grommets offer dust protection for all cable
entry and exit points
• Removable rear access panel
• Port identification sheets are included
• Mounting hardware included for 19" or 23"
rack mounting
• Available in Almond or Black
RTC144x
FiberOpticx™ Rack Mount Cabinets (Empty)
Catalog Number
Rack Units
Port Capacity*
Adapter Plates
Splice Capacity
RTC18x
2
18
3
24
Splice Trays/Kits
R24S
RTC36x
2
36
6
48
R48S
RTC72x
3
72
12
72
R72S
RTC72Sx – (With Storage Bay)
4
72
12
72
R72S
RTC144x
7
144
24
144
R144S
RSC-x
4
-
-
144
RxxTS
RSC-72x (Includes R72TS Kit)
4
-
-
72
RxxTS
RSC-144x (Includes R144TS Kit)
4
-
-
144
RxxTS
* “x” denotes cabinet color; Replace with A for Almond or B for Black
** Port capacity based on standard 6-pack adapter plates
Optical Cable Corporation reserves the right to change this specification without prior notification.
RACK MOUNT ENCLOSURES
FC 6
| FIBER OPTIC CONNECTIVITY
FiberOpticx™ Specialized Rack Mount Cabinets
Optical Cable Corporation’s Specialized Series Rack Mount
Cabinets provide the same reliable performance as the RTC
series with the added bonus of a specific use design. Each
specialized rack mount cabinet offers rugged durability and
options for complete customization.
For applications that require easy access to the rear
side of installed couplers, the RTD18B fiber termination
drawer is a perfect solution. This low profile high density rack
mount cabinet simply slides out for obstruction free access
for up to 36 ports.
FiberOpticx™ Rack Mount Cabinets (Empty)
Catalog Number
Description
RTD18B
Rack Mount Cabinet, Sliding Drawer, Plexiglas™
cover, 18 port, 1 RU, Black
* 18 port capacity based on standard 6 port coupler plates; higher
density may be achieved through 8- and 12-pack coupler plates
• Removable (Plexiglas™) cover protects contents, and is
easily removed to provide access to cable management
or splicing area of the cabinet
• Fiber cable managers are used to manage extra fiber
while maintaining bend radius requirements
• Allows for up to 36 connections per drawer, with
high-density 12-pack coupler plates
• Front side cable support shelf provides room to perform
cable management and tie-down.
For larger applications that mandate rear coupler access,
Optical Cable Corporation designed the RTS series rack
mount cabinets. With 24 to 48 port capabilities, the RTS
rack mount cabinet is ideal for easy contractor installations
offering the convenience of a sliding tray that operates both
forward and backward. Each cabinet is built to be a strong,
durable, high-density, patch and splice solution for fiber
optic networking.
• Constructed of 16 gauge steel with a black
powder coat finish
• High Density patch and splice
• Open top access and removable front door
• Sliding tray moves forwards and backwards
FiberOpticx™ Rack Mount Cabinets (Empty)
Catalog Number
Description
RTS24B
Rack Mount Cabinet, Sliding Tray, Plexiglas™
cover, 24 port, 2 RU, Black
• Rear locking feature for access control of
fiber terminations
* 24 port capacity based on standard 6 port coupler plates; higher
density may be achieved through 8- and 12-pack coupler plates
(Plexiglas™ is a Registered Trademark of Rohm & Haas)
Optical Cable Corporation reserves the right to change this specification without prior notification.
RACK MOUNT ENCLOSURES
FIBER OPTIC CONNECTIVITY |
FC 7
When higher density applications are needed, Optical Cable
Corporation rack mount cabinets offer a compact solution.
This rack mountable cabinet offers rugged durability and
complete application flexibility and is ideal for small racks
and closets. The RTR not only offers high density capabilities,
but also left and right rear cable entry and a removable top
access panel.
• Constructed of 16 gauge steel with a black powder
coat finish
FiberOpticx™ Rack Mount Cabinets (Empty)
• High density patch and splice in a 1 RU rack space
Catalog Number
Description
• Left and right rear cable entry
RTR12B
Rack Mount Cabinet, Recessed, High Density,
12 Port, 1 RU, Black
• Removable top access panel
* 12 port capacity based on standard 6 port coupler plates; higher
density may be achieved through 8- and 12-pack coupler plates
• Recessed feature for small rack form factor
• Includes (8) Bridge lances and (1) Rear metal
quarter-turn bail lock
• Accommodates any Optical Cable Corporation
snap-in adapter plate and R12 splicing kit
RTC1UB-48DLC
RTC1UB-24SCSM
Optical Cable Corporation’s RTC series fiber optic cabinets
offer a quick solution for easy plug and play connectivity.
Whether ordering empty for field installations or completely
pre-terminated for easy plug and play installations, the RTC
rack mount cabinets are a versatile and flexible option for
fiber optic structured cabling systems.
• Constructed of 16 gauge steel with a black
powder coat finish
FiberOpticx™ Rack Mount Cabinets
Catalog Number
Description
RTC1UB
Rack Mount Cabinet, With Cover & Fiber
Management, 18 Port, 1 RU, Black, Empty
RTC1UB-24SC
Rack Mount Cabinet, 24 Port, 1 RU, SC, Simplex,
SM/MM, Black
RTC1UB-24SCMM
Rack Mount Cabinet, 24 Port, 1 RU, SC, Simplex,
MM, Black
RTC1UB-24SCSM
Rack Mount Cabinet, 24 Port, 1 RU, SC, Simplex,
SM, Black
RTC1UB-48DLC
Rack Mount Cabinet, 48 Port, 1 RU, LC, Duplex,
SM/MM, Black
RTC1UB-48DLCMM
Rack Mount Cabinet, 48 Port, 1 RU, LC, Duplex,
MM, Black
RTC1UB-48DLSCM
Rack Mount Cabinet, 48 Port, 1 RU, LC, Duplex,
SM, Black
• High density patch and splice in a 1 RU rack space
• Left and right rear cable entry
• Removable top access panel
• Cable management hoops included
• Accommodates any Optical Cable Corporation
snap-in adapter plate or cassette module
• May be ordered pre-terminated for plug and
play operability
Optical Cable Corporation reserves the right to change this specification without prior notification.
RACK MOUNT ENCLOSURES
FC 8
| FIBER OPTIC CONNECTIVITY
For a multi-media application, Optical Cable Corporation offers
a universal rack mount patch panel for termination and cable
management only. The BHP panel system is well suited for
multi-application cabling environments and with Optical Cable
Corporation’s snap-in adapter plates and cassette modules,
these panels can be installed in a variety of combinations.
• Constructed of 16 gauge steel with a black powder
coat finish
• Strain relief bar offers enhanced cable management
• Tie wraps included for controlled cable
• Accommodates any Optical Cable Corporation snap-in
adapter plate or cassette module
FiberOpticx™ Universal Fiber Patch Panels (Empty)
Catalog Number
Rack Units
Port Capacity*
Adapter Plates
Splice Capacity
BHP3 - Panel
1
18
3
-
BHP6 – Panel
2
36
6
-
BHP72 – Plate
3
72
12
-
BHP144 – Plate
6
144
24
-
* Port capacity based on standard 6-pack adapter plates
Rack Mount Locking Kits
All standard RTC series cabinets are available with a locking
option for both front and rear access security. Order the
cabinet with a factory installed kit or specify
a retro-kit to upgrade any cabinet in service today.
RTCLK18/36x
FiberOpticx™ Retro-Fit Rack Mount Cabinet Locking Kits
Catalog Number
Description
RTCLK18/36x
Rack Mount Cabinet, 18 or 36 port, With Retro-Fit Lock Kit
RTCLK72x
Rack Mount Cabinet, 72 port, With Retro-Fit Lock Kit
RTCLK72Sx
Rack Mount Cabinet, 72 port, With Storage, With Retro-Fit Lock Kit
RTCLK144x
Rack Mount Cabinet, 144 port, With Retro-Fit Lock Kit
* “x” denotes cabinet color; Replace with A for Almond or B for Black
** Port capacity based on standard 6-pack adapter plates
Optical Cable Corporation reserves the right to change this specification without prior notification.
RACK MOUNT ENCLOSURES
FIBER OPTIC CONNECTIVITY |
FC 9
FiberOpticx™ Rack Mount Cabinets with Factory Installed Locking Kits
Catalog Number
Description
RTCL18x
Rack Mount Cabinet, 18 port, With Factory Installed Lock Kit
RTCL36x
Rack Mount Cabinet, 36 port, With Factory Installed Lock Kit
RTCL72x
Rack Mount Cabinet, 72 port, With Factory Installed Lock Kit
RTCL72Sx
Rack Mount Cabinet, 72 port, With Storage, With Factory Installed Lock Kit
RTCL144x
Rack Mount Cabinet, 144 port, With Factory Installed Lock Kit
* “x” denotes cabinet color; Replace with A for Almond or B for Black
** Port capacity based on standard 6-pack adapter plates
FiberOpticx™ Retro-Fit Rack Mount Cabinet Locking Kits with Metal Doors
Catalog Number
Description
RTCLKM18/36x
Rack Mount Cabinet, 18 or 36 port, With Retro-Fit Lock Kit, Metal Door
RTCLKM72x
Rack Mount Cabinet, 72 port, With Retro-Fit Lock Kit, Metal Door
RTCLKM72Sx
Rack Mount Cabinet, 72 port with storage, With Retro-Fit Lock Kit, Metal Door
RTCLKM144x
Rack Mount Cabinet, 144 port with storage, With Retro-Fit Lock Kit, Metal Door
* “x” denotes cabinet color; Replace with A for Almond or B for Black
** Port capacity based on standard 6-pack adapter plates
Rack Mount Recess Brackets
Optical Cable Corporation’s recess brackets allow RTC series
cabinets to easily mount into any enclosure with a front door.
By using Optical Cable Corporation’s recess brackets, the
cabinet will be flush with the rack’s mounting rails, allowing
sufficient room between the cabinet and the door.
BKTR1836x
FiberOpticx™ Recess Brackets for Rack Mount Cabinets (19” Mounting)
Catalog Number
Description
BKTR1836x
Recess Bracket for 18 or 36 port cabinet, 19” Mounting
BKTR72x
Recess Bracket for 72 port cabinet, 19” Mounting
BKTR144x
Recess Bracket for 144 port cabinet, 19” Mounting
* “x” denotes color; Replace with A for Almond or B for Black
FiberOpticx™ Recess Brackets for Rack Mount Cabinets (23” Mounting)
Catalog Number
Description
BKTR23/1836x
Recess Bracket for 18 or 36 port cabinet, 23” Mounting
BKTR23/72x
Recess Bracket for 72 port cabinet, 23” Mounting
BKTR23/144x
Recess Bracket for 144 port cabinet, 23” Mounting
* “x” denotes color; Replace with A for Almond or B for Black
Optical Cable Corporation reserves the right to change this specification without prior notification.
RACK MOUNT ENCLOSURES
FC 10
| FIBER OPTIC CONNECTIVITY
Rack Mount Splice Kits
FiberOpticx™ Rack Mount Splice Kits
Catalog Number
Description
R12S
Rack Mount Splice Kit for 12 Fiber splices
for use with RTR12B
R24S1UB
Rack Mount Splice Kit for 24 Fiber splices,
for use with RTC1UB
R24S
Rack Mount Splice Kit for 24 Fiber splices
R24TS
Rack Mount Splice Kit, Thin Tray,
for 24 Fiber splices
R24RS
Rack Mount Splice Kit, Ribbon Tray,
for 24 Fiber splices
R36TS
Rack Mount Splice Kit, Thin Tray,
for 36 Fiber splices
R48S
Rack Mount Splice Kit, for 48 Fiber splices
R48TS
Rack Mount Splice Kit, Thin Tray,
for 48 Fiber splices
R48RS
Rack Mount Splice Kit, Ribbon Tray,
for 48 Fiber splices
R72S
Rack Mount Splice Kit for 72 Fiber splices
R72TS
Rack Mount Splice Kit, Thin Tray,
for 72 Fiber splices
• All kits include transition trays for cable
management and radius control
R72RS
Rack Mount Splice Kit, Ribbon Tray,
for 72 Fiber splices
• Tubing for transporting buffered fibers safely
R96S
Rack Mount Splice Kit for 96 Fiber splices
• Accessories for adapting the trays into the cabinets
R96TS
• Felt strips and cable ties for securing and strain relieving
buffered fibers
Rack Mount Splice Kit, Thin Tray,
for 96 Fiber splices
R96RS
Rack Mount Splice Kit, Ribbon Tray,
for 96 Fiber splices
R144S
Rack Mount Splice Kit for 144 Fiber splices
R144TS
Rack Mount Splice Kit, Thin Tray,
for 144 Fiber splices
R144RS
Rack Mount Splice Kit, Ribbon Tray,
for 144 Fiber splices
R288RS
Rack Mount Splice Kit, Ribbon Tray,
for 288 Fiber splices
Optical Cable Corporation offers user friendly Rack Mount
splice kits for all applications. All Optical Cable Corporation
splice kits are injection-molded and have hinged clear plastic
covers for fiber visibility and maximum protection. Tabs
along the tray’s side allow for easy fiber routing and all
Optical Cable Corporation splice kits are available for smaller
fiber capacities.
Optical Cable Corporation reserves the right to change this specification without prior notification.
PRE-TERMINATED ENCLOSURES
FIBER OPTIC CONNECTIVITY |
FC 11
Pre-terminated Enclosures
Optical Cable Corporation has always strived to provide an
easy solution for any structured cabling problem. To alleviate
the need for complicated fiber optic installations, Optical
Cable Corporation offers a complete line of pre-terminated
and completely loaded FiberOpticx™ enclosures. Every
Optical Cable Corporation Wall Mount or Rack Mount cabinet
can be factory terminated for easy field installs and comes
with testing information for 100% guaranteed performance.
• Any pre-terminated or loaded enclosure can
be ordered using any Optical Cable Corporation
fiber optic enclosure
• Available in a variety of termination options
and application combinations (Single-mode
or multimode)
• Testing information included with every
pre-terminated cabinet
Use the ordering guide below to custom configure any Optical Cable Corporation cabinet:
FiberOpticx™ Pre-terminated Cabinets
Cabinet Type
Ports
Color
WTC
Wall Mount Cabinet
12
A
Almond
OCO
Outdoor Cabinet
18
24
36
B
Black
Loaded
Parts
Adapter Type
Pig Tails
6
ST (MM/SM)
P
12
MMST
18
SMST
24
SC (MM/SM)
RTC
Rack Mount Cabinet
48
36
MMSC
72
48
SMSC
RTD
Rack Mount Drawer
144
64
SCAPC
RTS
Rack Mount Slide
RTR
Rack Mount Recessed
72
SMFC
96
MMFC
120
FCAPC
144
MMRJ
192
SMRJ
288
LC (MM/SM)
MMLC
*OCO available in 6, 12, and 48 ports; RTD available in 18 ports;
RTS available in 18 and 24 ports; RTR available in 12 ports
SMLC
Multi-Mode
only
6
62.5 µm
Splice Kit
S
5
50 µm
5G
50 µm LO
Example: WTC144A144SMSCPS =
Wall Mount Cabinet 144 Port, Almond,
With 24 6-pack SMSC adapter plates,
With Splice Kit and Pigtails
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC ACCESSORIES
FC 12
| FIBER OPTIC CONNECTIVITY
Fiber Optic Accessories
Xpress Fiber Connectors
Optical Cable Corporation’s Xpress Fiber Connectors are
the new generation in field installable fiber terminations.
These connectors eliminate the need for messy epoxies
and expensive tools by offering a pre-polished solution
that can be installed in minutes. Xpress Connectors have
a pre-stubbed factory polished ferrule that joins to the
fiber using a precise mechanical alignment and a special
low loss index matching gel. Each connector comes with
a specially designed clip that holds the clamping devices
open for the fiber to be inserted. Once the fiber is
inserted, squeeze the clip to release the blades, remove
clip and discard.
Specifications
• Available for single-mode and multi-mode fibers
and come in SC, ST, and LC termination styles
• Easy to assemble
Parameter
Value
Insertion Loss:
Single-mode
50/125
62.5/125
Average: 0.2 dB, Maximum: 0.5 dB
Average: 0.1 dB, Maximum: 0.5 dB
Average: 0.1 dB, Maximum: 0.5 dB
Return Loss (Single-mode)
Average: 56.4 dB, Maximum: 45 dB
Operating Temperature
-40°C to +75°C
FiberOpticx™ Xpress Fiber Connectors
• No expensive tools or epoxy required
Catalog Number
• No polishing required
FXC-SCx-6
Xpress SC Connector, 6-pack
• Fiber can be re-installed
FXC-SCx-12
Xpress SC Connector, 12 pack
• Meets TIA/EIA 568 performance requirements
FXC-SCx-100
Xpress SC Connector, 100 contractor pack
FXC-STx-6
Xpress ST Connector, 6-pack
FXC-STx-12
Xpress ST Connector, 12 pack
FXC-STx-100
Xpress ST Connector, 100 contractor pack
FXC-LCx-6
Xpress LC Connector, 6-pack
FXC-LCx-12
Xpress LC Connector, 12 pack
FXC-LCx-100
Xpress LC Connector, 100 contractor pack
Description
Replace “x” with 5 for 50 micron, 5G for 50 micron 10 Gig,
6 for 62.5 micron or 8 for single-mode
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC ACCESSORIES
FIBER OPTIC CONNECTIVITY |
FC 13
Splice Trays
For the ultimate in splicing capabilities, Optical Cable
Corporation offers fiber Splice Trays that are available in
a variety of options and are injection molded for a cost
effective solution.
10180401
FiberOpticx™ Splice Trays
Catalog Number
Description
10180401
Optical Cable Corporation Standard Tray for 24
Fiber splices (up to 36 splices)
10455501
Optical Cable Corporation Splice Tray for (12) 12
Ribbon Fiber capacity
10630501
Optical Cable Corporation Thin Tray for up to
36 Fiber splices
10419901
Optical Cable Corporation Splice Tray for 12
Fiber splices
8003469
Optical Cable Corporation Splice Tray for 24
Fiber splices
80805110
Optical Cable Corporation Splice Tray with
Molded slots for up to
36 Fiber splices
10455501
10419901
Fiber Strippers and Cleavers
To create a full solution, Optical Cable Corporation offers
Fiber Strippers and Cleavers to assist in field fiber polishes
and terminations. These tools, necessary for any fiber optic
project installation, are backed by Optical Cable
Corporation’s 15 year product warranty and are a value
added component to the Optical Cable Corporation
FiberOpticx™ product line.
FOCT2
FiberOpticx™ Fiber Strippers and Cleavers
Catalog Number
Description
FOCT
FiberOpticx™ Precision Fiber Cleaver
FOCT2
FiberOpticx™ Economy Fiber Cleaver
(AKA Beaver)
FOST
FiberOpticx™ Fiber Stripper
FOST
Optical Cable Corporation reserves the right to change this specification without prior notification.
ZONE DISTRIBUTION
FC 14
| FIBER OPTIC CONNECTIVITY
Zone Distribution
Optical Cable Corporation’s Fiber Zone Distribution
solution for cable tray mounting provides a convenient
access point for network zone cross connect points. Each
Fiber Distribution module can be ordered blank or
custom configured with either Optical Cable Corporation
Fiber MT Cassette Modules or Optical Cable Corporation
Fiber Adapter Plates. These modules allow customers to
take the distribution point out of the equipment room to
where it’s needed, while giving installers less installation
time and a reduction in cabling costs.
• Fully customizable with Optical Cable Corporation
MT Cassette Modules or Fiber Adapter Plates
• Expandable design will fit tray widths from 12" to 18"
• Easy installations and additions without disturbing
previously installed cable
• Reduces the number of cables and congestion in
a cable tray
• All components made in the U.S.
When hours of tedious installation time are not available,
consider Optical Cable Corporation's pre-assembled fiber
optic connectivity solution that effectively eliminates the
labor associated with standard fiber field terminations.
Optical Cable Corporation’s plug and play zone distribution
box offers a variety of
fiber optic connectivity
options with the ease
of quick installations.
Perfect for the office
environment or if rack
space is limited, these
fiber zone boxes
mount anywhere and
are 100% factory
tested to ensure
superior performance.
• Available in a variety of pre-assembled plug and play
solutions, including MT to ST, MT to SC, MT to MT-RJ,
and MT to LC
FiberOpticx™ Zone “Spider” Distribution Solution
(for cable tray)
Catalog Number
Description
ZDMB2-WB1218
Fiber Zone Distribution Module – Bracket only*
* Order any Optical Cable Corporation MT Cassette Module or Fiber
Adapter Plate to custom configure your Zone Module
• Multi-mode adaptation only
• Mounts anywhere
• 100% performance tested using certified
ISO procedures
FiberOpticx™ Plug and Play Zone Distribution Boxes
Catalog Number
Description
PPEAMMDLC-005
Fiber Zone Box, Portable Patch Enclosure, Dual
LC x 6 to MT, 50 µm
PPEAMMDLC-006
Fiber Zone Box, Portable Patch Enclosure, Dual
LC x 6 to MT, 62.5 µm
PPEAMMDSC-005
Fiber Zone Box, Portable Patch Enclosure, Dual
SC x 6 to MT, 50 µm
PPEAMMDSC-006
Fiber Zone Box, Portable Patch Enclosure, Dual
SC x 6 to MT, 62.5 µm
PPEAMMQLC-005
Fiber Zone Box, Portable Patch Enclosure,
Quad LC x 3 to MT, 50 µm
PPEAMMQLC-006
Fiber Zone Box, Portable Patch Enclosure,
Quad LC x 3 to MT, 62.5 µm
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC CONNECTORS
FIBER OPTIC CONNECTIVITY |
FC 15
Fiber Optic Connectors
For those who prefer to assemble connectors at the component level, Optical Cable Corporation offers a complete line
of connector kits for field terminations. Each connector kit
offers exceptional optical performance in an easy to install
form factor.
• Available in FC, LC, SC, and ST connector styles.
• Single-mode and Multimode
• Low insertion loss and back reflection
Fiber Optic Connectors
Catalog Number
Description
FC-ST-SM
ST Connector Kit, Single-Mode, Blue Housing
FC-ST-MM
ST Connector Kit, Multimode, Beige Housing
FC-SC-SM
SC Connector Kit, Single-Mode, Blue Housing
FC-SC-MM
SC Connector Kit, Multimode, Beige Housing
FC-LC-SM
LC Connector Kit, Single-Mode, Blue Housing
FC-LC-MM
LC Connector Kit, Multimode, Beige Housing
FC-FC-SM
FC Connector Kit, Single-Mode, Blue Housing
FC-FC-MM
FC Connector Kit, Multimode, Beige Housing
Specifications
Parameter
Value
Insertion Loss (average)
0.2 dB
Reflectance
< -30 dB for PC
< -40 dB for Super PC
< -55 dB for Ultra PC
< -65 dB for Angled PC
Durability
≤ 0.2 dB change, 500 rematings, FOTP -21
Tensile Strength
≤ 0.2 dB change, 15 lb, FOTP -6
Temperature Cycling
-40° to +75°C, 21 cycles, < 0.3 dB change
Material
Ferrule: Preradiused zirconia
Housing: Thermoplastic
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC CLEANERS
FC 16
| FIBER OPTIC CONNECTIVITY
Fiber Optic Cleaners
To compliment our connectors, Optical Cable
Corporation offers dry cloth cleaners specifically designed
to clean single fiber connectors. Each cleaner is easy to
use and very effective at eliminating contaminants that
can deter optical performance.
• Cleaning system rotates 180° for a complete sweep
• Easy pushing motion employs connector and
commences cleaner
• Disposable with 525+ cleanings per unit
Fiber Optic Cleaners
Catalog Number
Description
FC-SCK-LC-125
Fiber Optic Cleaner, LC-MU
FC-SCK-SC-250
Fiber Optic Cleaner, SC-FC-ST
Environmental Properties:
Crush resistance up to 45 lbs
Impact resistance up to 6 feet
Operating Temperature Range -10°C to +60°C
Anaerobic Field Termination Kit
These small, light-weight kits offered by Optical Cable
Corporation are ideal for field terminations. These kits
include interchangeable Single-Mode and Multimode light
sources, termination tools, and portable fiber meters.
Fiber Optic Anaerobic Field Termination Kit
Catalog Number
Description
FC-AFT
Fiber Optic Anaerobic Field Termination Kit,
Includes SM Fiber Meter, MM Fiber Meter, Light
Source Mainframe, SM Light Source Module,
MM Light Source Module, 2.5mm to 1.25mm
Adapter, LC-ST Test Lead, LC-SC Test Lead,
ST-FC Adapter, SC-SC Adapter
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC ADAPTER PLATES
FIBER OPTIC CONNECTIVITY |
FC 17
Fiber Optic Adapter Plates
To accompany all Optical Cable Corporation FiberOpticx™
enclosures, Optical Cable Corporation developed snap-in
fiber adapter plates that are versatile enough to meet any
fiber application and durable enough to withstand field
installations. All Optical Cable Corporation fiber adapter
plates guarantee performance parameters for the application
specified and can be pre-loaded into Optical Cable
Corporation fiber cabinets for easy plug and play operability.
• Available in 6-, 8-, and 12-port fiber configurations
• Panel options available include ST, SC, DSC, FC,
MTRJ, LC, and others
• High density applications can be reached through
Dual and Quad LC applications
• Composite, Metal, or Ceramic sleeve options
• Blank panels are available for use as dust covers
• Plates are available for mounting Bezel style jacks,
creating a mixed media environments
ST Adapters
FiberOpticx™ ST Adapter Plates
Catalog Number
Description
616MMST
Fiber Adapter Plate, 6-port, ST, Multi-mode, Composite sleeve
616ST
Fiber Adapter Plate, 6-port, ST, Multi-mode/Single-mode, Metal sleeve
616SMST
Fiber Adapter Plate, 6-port, ST, Single-mode, Ceramic sleeve
616SMDST
Fiber Adapter Plate, 6-port, Dual ST, Single-mode, Ceramic sleeve
616ST/SC
Fiber Adapter Plate, 6-port, ST to SC patch, Multi-mode/Single-mode,
Composite sleeve
818MMST
Fiber Adapter Plate, 8-port, ST, Multi-mode, Composite sleeve
818ST
Fiber Adapter Plate, 8-port, ST, Multi-mode/Single-mode, Metal sleeve
818SMST
Fiber Adapter Plate, 8-port, ST, Single-mode, Ceramic sleeve
6112MMDST
Fiber Adapter Plate, 12-port, Dual ST, Multi-mode, Composite sleeve
6112DST
Fiber Adapter Plate, 12-port, Dual ST, Multi-mode/Single-mode, Metal sleeve
6112SMDST
Fiber Adapter Plate, 12-port, Dual ST, Single-mode, Ceramic sleeve
616ST/SC
818ST
616ST
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC ADAPTER PLATES
FC 18
| FIBER OPTIC CONNECTIVITY
616MMSC
SC Adapters
FiberOpticx™ SC Adapter Plates
Catalog Number
Description
616MMSC
Fiber Adapter Plate, 6-port, SC, Multi-mode, Composite sleeve
616SC
Fiber Adapter Plate, 6-port, SC, Multi-mode/Single-mode, Metal sleeve
616SMSC
Fiber Adapter Plate, 6-port, SC, Single-mode, Ceramic sleeve
616MMDSC
Fiber Adapter Plate, 6-port, Dual SC, Multi-mode, Composite sleeve
616DSC
Fiber Adapter Plate, 6-port, Dual SC, Multi-mode/Single-mode, Metal sleeve
616SMDSC
Fiber Adapter Plate, 6-port, Dual SC, Single-mode, Ceramic sleeve
616SCAPC
Fiber Adapter Plate, 6-port, SC, Single-mode, Angled, Composite sleeve
818MMSC
Fiber Adapter Plate, 8-port, SC, Multi-mode, Composite sleeve
818SC
Fiber Adapter Plate, 8-port, SC, Multi-mode/Single-mode, Metal sleeve
818SMSC
Fiber Adapter Plate, 8-port, SC, Single-mode, Ceramic sleeve
818SCAPC
Fiber Adapter Plate, 8-port, SC, Single-mode, Angled, Composite sleeve
6112MMDSC
Fiber Adapter Plate, 12-port, Dual SC, Multi-mode, Composite sleeve
6112DSC
Fiber Adapter Plate, 12-port, Dual SC, Multi-mode/Single-mode, Metal sleeve
6112SMDSC
Fiber Adapter Plate, 12-port, Dual SC, Single-mode, Ceramic sleeve
6112SMDSCAPC
Fiber Adapter Plate, 12-port, Dual SC, Single-mode, Angled, Ceramic sleeve
6112MMDSC
818SMSC
LC Adapters
FiberOpticx™ LC Adapter Plates
616MMDLC
6112SMDLC
6124MMQLC
Catalog Number
Description
616MMDLC
Fiber Adapter Plate, 6-port, Dual LC, Multi-mode, Composite sleeve
616DLC
Fiber Adapter Plate, 6-port, Dual LC, Multi-mode/Single-mode, Metal sleeve
616SMDLC
Fiber Adapter Plate, 6-port, Dual LC, Single-mode, Ceramic sleeve
818DLC
Fiber Adapter Plate, 8-port, Dual LC, Multi-mode/Single-mode, Composite sleeve
818SMDLC
Fiber Adapter Plate, 8-port, Dual LC, Single-mode, Metal sleeve
6112DLC
Fiber Adapter Plate, 12-port, Dual LC, Multi-mode/Single-mode, Metal sleeve
6112MMDLC
Fiber Adapter Plate, 12-port, Dual LC, Multi-mode, Ceramic sleeve
6112SMDLC
Fiber Adapter Plate, 12-port, Dual LC, Single-mode, Ceramic sleeve
6124MMQLC
Fiber Adapter Plate, 24-port, Quad LC, Multi-mode, Metal sleeve
6124SMQLC
Fiber Adapter Plate, 24-port, Quad LC, Single-mode, Ceramic sleeve
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC ADAPTER PLATES
FIBER OPTIC CONNECTIVITY |
FC 19
616SC50G
50 Micron 10 Gig Adapters
FiberOpticx™ 50 Micron 10 Gig Adapter Plates
Catalog Number
Description
616SC50G
Fiber Adapter Plate, 6-port, SC, Multi-mode, 50 Micron, Composite sleeve
616DSC50G
Fiber Adapter Plate, 6-port, Dual SC, Multi-mode, 50 Micron, Composite sleeve
6112DSC50G
Fiber Adapter Plate, 12-port, Dual SC, Multi-mode, 50 Micron, Composite sleeve
616DLC50G
Fiber Adapter Plate, 6-port, Dual LC, Multi-mode, 50 Micron, Composite sleeve
6112DLC50G
Fiber Adapter Plate, 12-port, Dual LC, Multi-mode, 50 Micron, Composite sleeve
6124QLC50G
Fiber Adapter Plate, 24-port, Quad LC, Multi-mode, 50 Micron, Composite sleeve
6112DLC50G
MT-RJ Adapters
FiberOpticx™ MT-RJ Adapter Plates
Catalog Number
Description
616MMRJ
Fiber Adapter Plate, 6-port, MT-RJ, Multi-mode, Composite sleeve
616MMDRJ
Fiber Adapter Plate, 6-port, Dual MT-RJ, Multi-mode, Composite sleeve
818MMRJ
Fiber Adapter Plate, 8-port, MT-RJ, Multi-mode, Composite sleeve
6112MMDRJ
Fiber Adapter Plate, 12-port, Dual MT-RJ, Multi-mode, Composite sleeve
6112SMDRJ
Fiber Adapter Plate, 12-port, Dual MT-RJ, Single-mode, Composite sleeve
616MMRJ
FC Adapters
FiberOpticx™ FC Adapter Plates
Catalog Number
Description
616FC
Fiber Adapter Plate, 6-port, FC, Multi-mode/Single-mode, Metal sleeve
616SMFC
Fiber Adapter Plate, 6-port, FC, Single-mode, Ceramic sleeve
616FCAPC
Fiber Adapter Plate, 6-port, FC, Single-mode, Angled, Ceramic sleeve
818MMFC
Fiber Adapter Plate, 8-port, FC, Multi-mode, Composite sleeve
818FC
Fiber Adapter Plate, 8-port, FC, Multi-mode/Single-mode, Metal sleeve
818SMFC
Fiber Adapter Plate, 8-port, FC, Single-mode, Ceramic sleeve
818FCAPC
Fiber Adapter Plate, 8-port, FC, Single-mode, Angled, Ceramic sleeve
616FC
818FC
Specialty Adapters
FiberOpticx™ Specialty Adapter Plates
Catalog Number
Description
600
Fiber Adapter Plate, 6-port, Blank
616BNC
Fiber Adapter Plate, 6-port, BNC adapters loaded
616F
Fiber Adapter Plate, 6-port, F adapters loaded
616SMA
Fiber Adapter Plate, 6-port, SMA adapters loaded
Optical Cable Corporation reserves the right to change this specification without prior notification.
600
FIBER OPTIC ADAPTER PLATES
FC 20
| FIBER OPTIC CONNECTIVITY
MT Plug and Play Cassette Modules
Designed for speed and effortless
installation, Optical Cable Corporation’s
fiber optic cassette modules are available
with many adapter choices and offer
customers a dependable, performance
driven solution. The cassettes simply
Snap-In to any Optical Cable Corporation
FiberOpticx™ rack mount or wall mount
cabinet and can be configured to meet any
fiber optic protocol. These cassettes provide
significant installation savings with no field
terminations required. Simply plug and play!
• Both 6- and 12-port modules are available with Duplex
ST, SC, MT-RJ, and LC adapters
• 24-port modules are available with new Quad LC adapters
• Cassette modules are factory terminated and 100%
tested for guaranteed performance
• Standard configuration has male MT (with pins) installed
FiberOpticx™ MT Cassette Modules
MTCM
Fiber Count
• Fits into any Optical Cable Corporation FiberOpticx™
rack or wall mount cabinet
• Available in 50, 62.5 or 8.3 micron for either Multi-mode
or Single-mode applications
Fiber Type
6
ST
5 = 50 µm
12
SC
5G = 10 Gig
24*
RJ
6 = 62.5 µm
LC
8 = 8.3 µm
• Available in 6-, 12-, and even 24-port adapters
• Easily field installable with Snap-In push pin design
Connector
* Note: 24 Port Cassette available in LC only
MT Cable Assemblies
The Optical Cable Corporation MT to MT cable assembly coupled
with Optical Cable Corporation's MT Cassette Modules offer a
true plug and play connectivity solution that effectively eliminates
standard labor costs associated with fiber field installations. The
MT solution ensures guaranteed performance through 100%
testing to ISO procedures and provides a low-profile cross
connect solution designed for reliability. Included with the MT
solution, Optical Cable Corporation’s pulling eye simplifies
connectivity needs by stream-lining connectors for snag-less
installations. This product can be used for pulling connected cable
through conduit or other channels, enabling quick connections.
• Available in 50/125 µm or 62.5/125 µm multi-mode
• Single-mode also available
• Riser or plenum rated cable can be ordered in any length
FiberOpticx™ MT to MT Cable Assemblies
MT
Fiber
Count
Fiber
Material
Fiber Style
Connector
Ends
Fiber Type
Fiber
Capacity
Length
in Feet
Pulling Eye Kit
06
R = Riser
B = Ribbon
F = Female
5 = 50 µm
TK = Standard
PK = 1 end
12
P = Plenum
R = Round
M = Male
6 =62.5 µm
TG = 10 Giga
PK2 = 2 ends
8 = SM
Example: MT12RBM5TK-03PK = MT Riser Cable Assembly, 12 fiber, Ribbon, Male connectors, Multi-mode 50 micron, 3 feet in length with 1 end pulling kit.
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC JUMPERS
FIBER OPTIC CONNECTIVITY |
FC 21
Fiber Optic Jumpers
Get exactly the jumper you need to make the transition
from cross-connect point to the electronics. With
unmatched insertion loss and exceptional return loss
performance, Optical Cable Corporation’s comprehensive
line of fiber jumpers ensures the right connection every
time. Each polish is 100% tested, including interferometer
inspection of end-face geometry and every assembly is
provided with corresponding test data. Available in simplex
or duplex, multimode (50/125 or 62.5/125) or Single-mode
and a variety of connector types and lengths, Optical Cable
Corporation’s jumpers can be ordered to customize any
fiber optic protocol.
FC
LC
• ISO certified
SC
• Telcordia GR-326-CORE compliant
• Automated polishing equipment
• Interferometer testing for End-face geometry
• 100% testing on Multi-mode for insertion loss
• 100% testing on Single-mode for insertion
and return loss
ST
• Multi-Fiber distribution cables, single or
dual ended terminations
• Discrete connectors utilize ceramic ferrules
• Custom jacket colors for security applications
• Any specified length available
MTRJ
• PC polish is standard
FiberOpticx™ Multi-mode Jumpers
-
-
Fiber Count
Fiber Type
Connector Type
Connector Type
Length in Meters
Gigabit
D = Duplex
5 = 50 µm
ST
ST
1M
G
S = Simplex
6 = 62.5 µm
SC
SC
2M
LC
LC
3M
RJ = MT-RJ
RJ = MT-RJ
5M
FC
FC
Example: D6RJ-SC-1M = Duplex 62.5 µm, MT-RJ to SC, 1 Meter in length
10M
*Any custom length
available
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBER OPTIC JUMPERS
FC 22
| FIBER OPTIC CONNECTIVITY
FiberOpticx™ Single-mode Jumpers
8
Optional
Fiber Count
Connector Type
Polish Type
Connector Type
Polish Type
Length in Meters
D = Duplex
ST
UPC = Ultra
ST
UPC = Ultra
1M
S = Simplex
SC
XUPC = Extreme
SC
XUPC = Extreme
2M
LC
APC = Angled
LC
APC = Angled
3M
FC
FC
5M
RJ = MT-RJ
RJ = MT-RJ
10M
*Any custom length
available
Example: S8FCXUPC-SC-3M = Simplex Extreme Polish, FC to SC, 3 Meters in length
Factory Polishes - Discretes
Polish
Return Loss
Insertion Loss
PC
-50 dB
.35 max
UPC
-55 dB
.30 max
XUPC
-55 dB
.20 max
APC
-65 dB
.30 max
Fiber Optic Pigtails
Optical Cable Corporation’s fiber optic pigtail assemblies are
designed for reliability and performance. All Optical Cable
Corporation pigtail assemblies may be ordered pre-terminated
in any Optical Cable Corporation rack or wall
mount cabinet or custom configured for field
installations. Either way, Optical Cable
Corporation’s pigtail assemblies combine
high-precision zirconia ferrules and rugged
composite hardware to provide the optical
performance, durability and repeatability
necessary for today’s network applications.
• Available in 6 or 12 bundle pigtails
• Color-coded 900 micron
designed for splicing in enclosure
environments
• Fiber sleeving color coded to
differentiate Multi-mode, Singlemode, and 50 Micron
• Ribbon and jacketed cable pigtails
also available
• Any specified length available
FiberOpticx™ Pigtail Assemblies
P
Optional
-
Fiber Type
Connector Type
Polish Type
Fiber Count
5 = 50 µm
ST
UPC = Ultra Polish
06
1M
5G = 50 Gig
SC
APC = Angled Polish
12
2M
6 = 62.5 µm
RJ = MT-RJ
8 = Single-mode
LC
5M
FC
10M
Example: P8SCUPC12-3M = Pigtail Assembly, Single-mode, SC, Ultra Polish, 12 fiber, 3 Meters in length
Optical Cable Corporation reserves the right to change this specification without prior notification.
Length in Meters
3M
FIBREGUARD™ CLOSURE
FIBER OPTIC CONNECTIVITY |
FC 23
Fibreguard™ Closure
Ideal for Campus LANs, Data Centers and Entrance Facilities,
Optical Cable Corporation offers the Fibreguard™
Enclosure, a complete and fully accessible fiber closure
solution. The Fibreguard™ enclosure was engineered with
the contractor in mind by providing an express cable port
design and an innovative end plate design with segmented
sections that allow for individual access to each cable
without disruption to surrounding cables. Additionally, a full
line of multi-hole grommets ensure the ultimate level of
flexibility. Re-entry is quick and requires no special tools or
kits. Moreover, the Fibreguard™ enclosure provides a
connectivity solution that was specifically designed for an
ever-evolving telecommunications network.
• No special tools required
• Easy future drop cable installation
• No gas equipment cost
• Mechanical Cable and Closure Sealing System
• Expandable Split Grommets
• Multi-drop Ability from one port
• Wide opening express cable ports
• Extensive size of cable ranges accepted
• Proven “O” ring sealing system from dome to end plate
• Flash testing to prove closure integrity
• Minimal cable preparation required
• Cost effective
Fibreguard™ Enclosures
Catalog Numer
Descpription
Express Ports
Drop Ports
Fiber Trays
Included
Grommets Included
FG5-1S
Fibreguard™ 500 Series
2
2
(1) 12 fiber
A (2 pcs.)
FG5-2S
Fibreguard™ 500 Series
2
2
(2) 12 fiber
A (2 pcs.)
FG5-3S
Fibreguard™ 500 Series
2
2
(3) 12 fiber
A (2 pcs.)
FG5-4S
Fibreguard™ 500 Series
2
2
(4) 12 fiber
A (2 pcs.)
FG6-1S
Fibreguard™ 650 Series
2
3
(1) 24 fiber
A, B, & C (2 each)
FG6-2S
Fibreguard™ 650 Series
2
3
(2) 24 fiber
A, B, & C (2 each)
FG6-3S
Fibreguard™ 650 Series
2
3
(3) 24 fiber
A, B, & C (2 each)
FG6-4S
Fibreguard™ 650 Series
2
3
(4) 24 fiber
A, B, & C (2 each)
FG8-1S
Fibreguard™ 800 Series
2
5
(1) 24 fiber
A, B, & C (2 each)
FG8-1S48
Fibreguard™ 800 Series
2
5
(1) 48 fiber
A, B, & C (2 each)
FG8-1S72
Fibreguard™ 800 Series
2
5
(1) 72 fiber
A, B, & C (2 each)
Optical Cable Corporation reserves the right to change this specification without prior notification.
FIBREGUARD™ CLOSURE
FC 24
| FIBER OPTIC CONNECTIVITY
Fibreguard™ Enclosure Information
Closure Designation
on
Express Port
Sizes mm
(inches)
Drop Port
Sizes mm
(inches)
No. of
Drop Ports
Closure
Length mm
(inches)
Closure
Diameter
mm (inches)
Max. No.
of Splice
Trays
24 per tray
36 per tray
500 Series
2 x 10 -25
(.39 -1.00)
2 x 3 -25
(.11 -1.00)
2
515 (20-25)
130 (5)
4
48
N/A
650 Series
2 x 10 -25
(.39 -1.00)
3 x 3 -25
(.11 -1.00)
3
600 (24.5)
165 (6.5)
4
96
144
800 Series
2 x 10 -25
(.39 -1.00)
2 x 3 -25
(.11 -1.00)
5
700 (28.5)
203 (8.0)
8
192
288
FibreGuard™ Grommets
Splice Capacity
FibreGuard™ Splice Trays
Catalog Number
Description
Catalog Number
Description
FGD-1H
Includes A, B, and C grommets
FG5003
12 fiber slide-n-lock tray, fusion splice
FGD-2H
(1) 2-hole grommet
FGT-24S
24 fiber slide-n-lock tray, fusion splice
FGD-4H
(1) 4-hole grommet
FGT-48S
48 fiber slide-n-lock tray, fusion splice
FGT-72S
72 fiber slide-n-lock tray, fusion splice
FibreGuard™ Grommet Drop Port Combinations
Closure
Designation
Cable Range mm
(inches)
Number of
Entries
A
10-15 (0.39-0.59)
1
B
15-21 (0.59-0.82)
1
C
21-25 (0.82-1.00)
1
2H
7-12 (0.27-0.47)
2
4H
3-7 (0.11-0.27)
4
Optical Cable Corporation reserves the right to change this specification without prior notification.
Download PDF