A removable fader panel allows the mixer to be easily configured as a linear fader or a rotary fader mixer.
All faders plug in and can therefore be changed easily should the need arise.
All switches are illuminated to show system status clearly. 2 push button types have been utilised to ease
recognition of frequently used switches. Knob sizes and control spacing has been maximised.
Channel Features
6 Channels. 1&2 are switchable to Mic- Line, (mic inputs Lo Z balanced). Channels 3 -6 are switchable to
either phono - line or line - line. All inputs have rear panel gain trims to set individual levels.
Channels 3 - 6 have a concealed switch to select phono or line input.
Front Panel Controls
1 Illuminated input select push switch with adjacent led indicator
1 Gain pot with adjacent clip indicator and 5 segment led meter indicating signal presence.
3 band E.Q. featuring +6 dB boost and -25dB cut at HF 10kHz, Mid 1kHz & Bass 100Hz
Full routing to crossfader A -B or direct to master from all channels. Illuminated push buttons.
Cue switch.
Rotary or Linear faders on removable panel along with 45mm VCA controlled crossfader.
Master Section
Very comprehensive effects routing and mixing facilities
Features 2 effects loops A & B with wet / dry mixing controls, punch or latching push switches. Loop Swap facility.
Mono switch and bal / pan control . Send and return gain trims to allow correct level matching into any outboard
effects processors. Cue switch allows checking of the desired effect before selection.
1 switchable insert on the main outputs.
Outputs:- Master output available in stereo and mono on XLR connectors (balanced)
Zone output available in stereo and mono on XLR connectors (balanced)
Booth Monitors output switchable to mono on XLR connectors (balanced)
Record outputs are provided on phono connectors.
Console Mic.
An input for a separate console microphone (XLR connector Lo Z Balanced) is fitted. This signal is routed to the
zone and master outputs but it is not present in the booth outputs.
2 band E.Q. Cue & Mic ON switch also fitted.
Phones outputs are provided on 3.5mm and standard 6.5mm jack sockets driven by a powerful headphone
amplifier. Split cue switch and cue mixing control are also featured.
2 X 12 segment stereo led meters are fitted to visually monitor Cue and output signals.
Steel Front panel with a rear printed polycarbonate overlay guarantees that the mixer will still look good in years
to come.
Our 30+ years of pro-audio manufacturing ensures that the highest performance audio quality, build quality
and reliability is assured.
Formula Sound Ltd. Ashton Road. Bredbury. Stockport. Cheshire. SK6 2SR
Telephone: +44 (0)161 494 5650 Fax: +44 (0)161 494 5651
email: [email protected] Web site: www.formula-sound.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF