91380 Crib Wedge IB_ART
 WASH & CARE INSTRUCTIONS:
To clean: Wipe clean with a damp cloth.
go visit us at www.summerinfant.com
QG
Summer Infant stands behind all of its products. If you are not completely
ummer satisfied or have any questions, please contact our Consumer Relations Team
S infant at 1-800-268-6237 or www.summerinfant.com/contact
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
©2016 Summer Infant, Inc.
(For Europe call +44 (0) 144 250 5000 or [email protected])
connect with us: us Youf 7)
Summer Infant Europe, Ltd. MADE IN CHINA.
Ist Floor, North Wing Colors and styles may vary.
Focus 31, Cleveland Road Please retain information
Hemel Hempstead, HP2 7BW UK for future reference.
0144 250 5000 10/16
©
SwaddleMe
91380
Please read the following instructions
and warnings carefully.
IMPORTANT! KEEP FOR FUTURE REFERENCE
Tools required: Phillips head screwdriver (not included).
Requires 3 “AA” batteries (included).
Adult assembly required.
For technical support, call 1-800-268-6237, or
e-mail at [email protected]
In Europe, call +44 (0) 144 250 5000, or e-mail
us at [email protected]
For use with children from birth and up.
Keep small parts away from children.
—
INSTRUCTION MANUAL
Good Vibes™ Vibrating Crib Wedge
Thank you for purchasing the Good Vibes Vibrating Crib Wedge from
Summer Infant. The Good Vibes was designed to provide both comfortable
incline and soothing vibration to help little ones fall asleep and stay asleep,
especially when transitioning from inclined sleepers to the crib.
above below
Л WARNING: mattress mattress
* NEVER use product on top of or under a crib sheet.
* NEVER use product on top of a crib mattress. Say
e Product should only be used under a crib mattress. au
To prevent rolling or sliding, only the child's back or head Sosition
should be elevated.
A BATTERY WARNING:
* Do not mix old and new batteries.
Do not mix alkaline, standard, or rechargeable batteries.
e Remove batteries when product is stored for long periods of time or when batteries are exhausted.
e Dispose of exhausted batteries properly.
e Non-rechargeable batteries are not to be recharged.
e Rechargeable batteries are to be removed from the toy before being charged.
e Rechargeable batteries are only to be charged under adult supervision.
e Batteries are to be inserted with the correct polarity.
* The supply terminals are not to be short-circuited.
TO USE:
TO USE:
NOTE: Batteries are included for the “Try Me” mode. To activate the normal play mode,
move switch to any of the three timer positions. When in “Try Me” mode, each function
Will automatically shut off after 10 seconds.
Power/ Timer Control:
The main on/off/timer switch can be found next
to the battery door on the bottom of the unit.
Open the pocket to locate the switch.
Turn switch to the “Off” position
during long periods of inactivity.
ON/OFF/TIMER CONTROL:
| st position:
2nd position:
3rd position:
4th position:
5th position:
“Try Me” mode
Off
On/ 15 min auto shut-off
On/ 30 min auto shut-off
On/45 min auto shut-off
PLACEMENT IN CRIB:
Step I:
Place product under head of crib
mattress. Product is not intended for
use on top of crib mattress.
Step 2:
Unfasten hook and loop closures on
power button handle and pull one
end of handle through crib slats.
Step 3:
Wrap handle around crib slats and
refasten hook and loop closures.
Power button is now easily accessible
without waking baby.
Vibration:
Adjust the level of vibration with the button located on the “Easy-Access” handle.
Press the button once for low vibration, twice for medium vibration, and three times
for high vibration. Once you make a decision, the vibration will play the selected
amount of time before shutting off automatically.You can turn off the vibration feature
manually by cycling through all three options and then pressing the button once more.
Low Vibration
Press once
Medium Vibration
Press twice
| —
High Vibration
Press three times
TO CHANGE BATTERIES:
Step I:
Open pocket on bottom of unit.
Step 2:
Use a Phillips head screwdriver to loosen
battery door screw. Open battery door.
Remove old batteries and dispose of them safely.
Step 3:
Insert 3 new “AA” batteries, making sure
that the “+ and -” are facing the correct way.
The battery compartment is marked for clarity.
Step 4:
Screw battery door back onto unit.
Make sure the On/Off Switch is in
one of the three "On/Timer" positions
and secure pocket.
On/Off/ Timer Switch —
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement