Specification Sheet INSIGHT 4K Quad Lamp (Preliminary)

Specification Sheet
INSIGHT 4K Quad Lamp (Preliminary)
25,000 ANSI Lumens | Contrast Ratio: 2000:1 | Part No:115-900
Colour System:
DMD Specification:
3-chip DLP®
4096 x 2160 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
1.90:1
Fill Factor
87%
Display Type:
3 x 1.38" DarkChip™ DMD™
Key Features
Video & Graphics Processing
Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
3D Capable
Scaling of HDMI 1.4 formats to fill the 4K display
Dark Time insertion capability
HDMI 1.4b up to 3840 x 2160 at 30 fps.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Synchronisation of active glasses or polarising switcher.
Color adjustments
Up to 12 bits per color processing (depending on source and input type).
Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.
Individual R, G & B lift and gain.
Black and White level adjustment via Brightness & Contrast control.
Degamma selection from a list of parametric curves.
ColorMax™
Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary user defined color targets up to 7 points.
3D Functionality
Full 4K 3D display capability
Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.
Synchronisation of active glasses or polarising switcher.
Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses
and polarizers.
Projector Control
Keypad.
Wired remote control.
Network control via RJ45 and protocol.
Group Controller Application
Source Compatibility:
Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI.
Inputs/Outputs
Video & Computer
Communication & Control
Type
Connector
Qty
Type
Connector
Qty
DisplayPort 1.2
HDMI 1.4
DisplayPort
HDMI
2
2
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Infra-Red
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
Front and Rear IR
Receivers
1
1
1
1
1
2
3D Formats Supported
HDTV Formats Supported
Dual Pipe (Q3 2016)
Frame Sequential
4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
1080p (24, 25, 30, 50, 59.94, 60 Hz)
Computer Compatibility
Bandwidth
Up to 4096 x 2160
N/A
Remote Control
Automation Control
Wired remote control
On-Board keypad
RS232
LAN
Colour Temperature
Adjustable
Lamp Type
Typical Lamp Life
4 x 465W High Intensity Discharge
Full Power: 1500 hours (up to 6000 hours in lamp
sequential mode) Eco Mode : 2000 hours (up to 8000
hours in lamp sequential mode)
Lenses
Lens
Part No.
Focus Range
Lens Shift
0.93:1 fixed
1.13 - 1.72:1 zoom
1.65 - 2.60:1 zoom
2.53 - 4.98:1 zoom
116-087
115-627
115-630
115-632
0.5m - 100m 2.5m - 100m 3.5m - 100m 4.5m - 100m Vert: 0.210 (U) 0.210 (D) frame, Hor: 0.08 (L) 0.08 (R)
frame
Vert: 0.340 (U) 0.190 (D) frame, Hor: 0.09 (L) 0.09 (R)
frame
Vert: 0.400 (U) 0.200 (D) frame, Hor: 0.13 (L) 0.13 (R)
frame
Vert: 0.375 (U) 0.200 (D) frame, Hor: 0.13 (L) 0.13 (R)
frame
Lens Mount
Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.
Mechanical Mounting
Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and
yaw adjustments.
Table Top or Inverted: Yes
Pointing Up:
Yes
Pointing Down: No
Roll (Portrait): No
Power Requirements
Power Consumption
200-240VAC 50/60Hz single phase
2100WW
Thermal Dissipation
Fan Noise
7165 BTU/Hour BTU/Hour
48 dBA
Operating/Storage Temperature
Operating Humidity
Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)
20 to 80% non-condensing
Weight (Chassis Only)
Dimensions
H: 32.5 cm W: 70.0 cm L: 93.5 cm
H: 12.8 in W: 27.56 in L: 36.8 in
Safety & EMC Regulations
CE, FCC Class A
Accessories
Accessory
Part No.
RapidRig™ Frame
Ceiling Mount
Replacement Filter Set
116-064
116-065
TBD
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this
display for more accurate information.
Downloads
PDF CAD Drawings
AUTOCAD Drawings
Specifications subject to change without notice. Digital Projection version: - ©2016 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc
DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk
DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 | F: 770.420.1360 | www.digitalprojection.com
DIGITAL PROJECTION, CHINA TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING,
PR CHINA 100101
T: +86.10.58239771 | F: +86 10 58239770
DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238
Download PDF