PoE-Touch Fingerprint and RFID Access Control

P7
PoE-Touch Fingerprint and
RFID Access Control
P7
Intelligent Security
PoE-Touch Fingerprint and
RFID Access Control
P7 is a new generation access control device of Anviz. The P7 adopts touch activation
technologies in fingerprint sensor and keypad for easy for ease of operation. As an access
control device, which are designed with PoE communication and access interface separation,
the P7 is easy to install and reducing the labor cost. The powerful access control function is
noteworthy for P7. Relay output for door control, Wiegand output and group, time zones. Multi
communications with TCP/IP, RS485 and Mini USB port. The Alarm push function increases area
security.
3
High Precision
OLED Display
Touch Keypad&Sensor
PoE
Access Control
Equipment
CrossChex
Touch-On
PoE
When you place your finger on
Power Over Ethernet provides device
fingerprint sensor, sensor will be
network communication and the power
activated automatically and will awaken
is sufficient for both device and lock to
the device from sleep.
operate.
Sense-On
Outline Drawing
When you reach out your hand to
touch the keypad, P7 will be
54mm
activated automatically and ready
170mm
for your entering.
Easy Installation
The access interface adopts quick Install
connector, without any tools to finish the
wiring of the access control. The P7 with
front and rear clamshell design will further
simplifies installation operation for
installer.
41mm
Event Push
Switch
P7
Intelligent Security
PoE-Touch Fingerprint and
RFID Access Control
BioNANO - The core algorithm
BioNano is applied in all Anviz biometric-based products used for identification.
Independent research and development
Suitable for both wet and dry fingers
Automatically heals the broken lines in fingerprint images
Core Algorithm V10
Extraction of features in worn fingerprints
Fingerprint - Facial - Iris
Fingerprint template auto update
Parameters
Features
Activation Mode
Touch
Scan Area
22mm*18mm
Resolution
500 DPI
Display
128*64 OLED
Touch activation fingerprints sensor and keypad
Fingerprint Capacity
3000
Support POE power supply for both device and lock
Card Capacity
3000
Log Capacity
50000
Tamper alarm door magnetic signal interface (known the
Applicable Situation
Max 3000 Users
door open and close state), to support himself back
Identification Mode
FP, Card, ID+FP, ID+PW, PW+Card, FP+Card
Identification Time
<0.5S
Communication Interface RS485, Mini USB Slave, TCP/IP, Wiegand Out&In
Using Anviz intelligent core algorithm
3000 Fingerprints, 3000 Cards, 50000 Records
Optical waterproof fingerprint collection device, abrasion
resistance, adapt to all kinds of fingerprints
RS485, mini USB and TCP/IP communications, Wiegand output
Directly controlled door lock, grouping management, time setting
Fingerprint, password and card combination of independence and
recognition
Touch the bright background number keys
High precision OLED displays
Standard EM the RFID card reader module, optional Mifare
Card Reader Module
EM RFID, Optional Mifare
Workcode
6-digit Work Code
Short Message
50
Software support for period of time, group management, 16
Relay
Relay Output (COM, NO, NC or Direct Lock Control)
group
Door Open Sensor
Yes
Tamper Alarm
Yes
PoE
Standard IEEE802.3af
Operating Voltage
DC 12V
Size
54(w)*170(h)*41(d)mm
Temperature
-13°F/-25°C~158°F/70°C
module
Optional waterproof cover, realize outdoor use, IP53
access permissions, flexible control
32 entrance guard time real-time monitoring data, easy to learn
and easy to use
P7
Intelligent Security
PoE-Touch Fingerprint and
RFID Access Control
Application
Flexible applications such as standalone, secure and network system for different industries.
Network Topology Illustration
Standalone Access Control System
The core part of this system is stand alone
access control. With the lock directly controlled
by the standalone access control, this system is
able to supply easy and safe solution.
Door
Lock
PoE
Door
Sensor
Exit Button
P7
Secure Access Control System
AP123(Power Supply)
SC011
(Access Controller)
PoE
The secure system consists of an access controller and reader. Because the lock is controlled by
the access controller, this system is more secure
and suitable for a single door having higher
safety requirement.
Door
Lock
Door
Sensor
Exit Button
P7
Network Access Control System
P7
Exit Button P7
TCP/IP
Exit Button
PoE
PC Client
P7
Exit Button
Server
U-Bio
The network access control system consists of
different access control systems such as standalone system, secure system and distributed
system. This system is the most professional
solution, which best fits projects with multiple
requirements.
Download PDF