G32D5 ON THE P8M Proofer/Holding

G32D5 ON THE P8M Proofer/Holding
G32D5 / P8M
Technical data sheet for
G32D5 ON THE P8M Proofer/Holding
Cabinet Full Size Digital / Gas Convection Oven on a
8 Tray Manual / Electric Proofer/Holding Cabinet
• Full size sheet pan capacity
• 5 tray Oven / 8 tray Proofer
• Compact 287/8” / 735mm width
• Low unit height 613/8” / 1560mm
• Side hinged doors (standard LH hinge)
Optional RH hinge (field convertible)
• Dual halogen lamps in Oven and Proofer
• Proofer with dual function Proof and Holding modes
•31/3”/ 85mm tray spacing
• Electronic digital display Time and Temperature controls
• Manual mode and Program mode
• 20 programs with 3 stage cooking and stage end alarms
• Core Probe program cooking (optional Core Probe Kit)
• Moisture injection mode (5 levels) and manual injection
• Bi-directional reversing fan system
• Safe-Touch vented door
• Porcelain enameled oven chamber
• 33,000 Btu/hr patented infrared burner system
• Plug-in continuous oven door seal
• 5 oven wire racks supplied
• 100% recyclable packaging
Unit shall be a Moffat gas heated Turbofan convection oven NSF-4 and CSA
listed. The oven shall have a one piece porcelain enameled oven chamber,
stainless top and sides and safe touch vented easy clean side hinged door that
offers field reversible hinging. Oven shall have capacity for five full size sheet
pans. The oven shall be controlled by an electronic control having separate
digital displays and adjusting knobs for time and temperature functions. The
oven control shall allow both manual and programmed operating modes with
programmable moisture injection and 3 stage cooking. A core temperature probe
M236060 is optional. The unit shall include dual halogen oven lamps. Unit shall
be supplied in 100% recyclable shipping packaging. This unit shall be Energy
Star certified.
Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet
ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have double
skin construction with stainless steel interior and exterior sides, front and top.
Door shall be side hinged and field reversible. Unit shall have capacity for up
to 16 half size sheet pans or 8 full size sheet pans. A single speed fan shall
gently and evenly circulate air around the cabinet. Cabinet shall be controlled
by a mechanical thermostat and humidity via a control of the water tank. A
thermometer shall indicate the cabinet temperature. Proofer and holding cabinet
shall be mounted on castors, with two rigid castors at rear and two swivel castors
dual swivel and wheel lock and front. Proofer and Holding Cabinets shall be fitted
with NEMA 5-15P cordsets. Unit shall be supplied in 100% recyclable shipping
• 3”/ 76mm tray spacing
• Auto water fill system with optional integrated water filter kit
• Continuous door seal
• Low velocity circulation fan system
• Mechanical thermostat and humidity level control
• Cabinet temperature display thermometer
• 4 dia. 3” / 76mm castors with 2 front castors dual wheel
and swivel lock, 2 rigid rear castors
• 100% recyclable packaging
• Optional M236060 Core Temp Probe Kit
• Optional 3M Cuno water filter kit complete with cartridge
and connection fittings
• Installs in pre-fitted rear housing of cabinet for flush rear
G32D5 / P8M
G32D5 Full Size Digital / Gas
Convection Oven
P8M Full Size Manual / Electric
Proofer/Holding Cabinet
Gas Requirements - Oven (G32D5)
33,000 Btu/hr / 35MJ/hr burner rating
Natural, Propane/Butane models
Unit supplied complete with gas type conversion kit
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel frame side hinged door
0.2” / 5mm thick door inner and outer glass
Stainless steel control panel
Aluminized coated steel base and rear panels
304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels
CONTROLS - Oven (G32D5)
Electronic controls with Digital Time and Temperature display,
Manual or Program modes
Large ¾” / 20mm high LED displays
Two individual time and temperature setting control knobs
ON/OFF key.
Oven Lights key
Timer Start/Stop key
Moisture Injection key (5 levels)
Programs select key
Actual temperature display key
Adjustable buzzer/alarm volume
Thermostat range 150-500°F / 50-260°C
Timer range from 180 minute in countdown mode /
999 minute in count-up mode
Direct burner ignition control flame failure safety control
Optional Core Probe temperature range 122-194°F / 50-90°C
Over-temperature safety cut-out
CONTROLS - Proofer (P8M)
Off / Proof / Holding mode selector switch
Mechanical thermostat 32-185°F / 20-85°C
Humidity level control
Cabinet temperature thermometer
Auto-fill water system standard
Gas Connection - Oven (G32D5)
½” NPT male
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven and proofer side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass (no
tools required)
Removable plug-in oven door seal (no tools required)
Electrical Requirements
Oven (G32D5)
110-120V, 60Hz, 1-phase, 1A
NEMA 5-15P cordset fitted
Moffat Inc
3765 Champion Boulevard
Proofer (P8M)
110-120V, 50/60Hz, 1-phase, 1.45kW, 11.6A
NEMA 5-15P cordset fitted
North Carolina 27105
Water Requirements
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
Connection to oven optional
Ph Toll Free 1-800-551 8795
External Dimensions
Width 287/8” / 735mm
Height 57¾” / 1715mm
Depth317/8” / 810mm
Email [email protected]
Ph 336-661 0257
Fax 336-661 9546
Nett Weight
Oven (G32D5)
250lbs / 113kg
Proofer (P8M)
171lbs / 77.5kg
Packing Data
Oven (G32D5)
289lbs / 131kg
25ft³ / 0.71m3
Width 297/8” / 760mm
Height393/4” / 1010mm
Depth363/8” / 925mm Proofer (P8M)
201lbs / 95.3kg
26.8 ft³ / 0.76m3
Width 30” / 760mm
42½” / 1080mm
363/8” / 925mm
3” / 75mm
3” / 75mm
LH Side
2” / 50mm
2” / 50mm
RH Side* 3” / 75mm
3” / 75mm
* For fixed installations a minimum of 20” / 500mm is required
for service
A minimum distance of 12” / 300mm from the appliance
sides is required
Manufactured by:
Moffat Limited
45 Illinois Drive, Izone Business Hub
Rolleston 7675, New Zealand
Designed and manufactured by
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
© Copyright Moffat Ltd
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF