ELAC FS 127: Great music, slender design
The elegant proportions of the FS 127 together with
the high gloss lacquer baffle are a joy to behold. This
loudspeaker will give many years of pleasure not only
for your ears but also for your eyes.
Technical features / benefits
ELAC’s 140mm aluminium sandwich woofers
provide perfect integration while reducing
partial resonances.
25mm tweeter with deep-drawn dome and
bobbin to provide for low-distortions and
thermal overload protection. The elliptical
waveguide offers homogeneous directional
The special design of the baffle eliminates
deffraction which results in improved tweeter
Resonances of the cabinet are avoided due to ring-shaped
High-quality terminals, with separate circuit boards for
bass/midrange and treble circuits, are easy to access, and allow
larger cable diameters (16 mm2), as well as high-quality spade
connectors (e. g. WBT products).
The FS 127 provides one bass port on the rear and one down-firing bass port. Inserting the ELAC bass control plug into
the rear bass port will improve the sound when it comes to critical room conditions. This way, the upper bass area will be
reduced, while the deep bass area will be increased. This results in deep, dry bass sound. In case of critical room
conditions, the bass port on the rear may be closed by using the two-piece bass control plug.
• The FS 127 is a 2 1/2-way floor
standing speaker. The two bass
woofers work in tandem, however the
second bass driver becomes decoupled above 550Hz when it then
operates as a midrange unit.
• The utilization of two bass drivers has resulted in a high efficiency system, thus
enabling the smaller amplifiers to be used. Built in overload protection is a feature of
the FS127.
Finishes: silver, titan, cherry, black
Dimensions H x W x D
Recom. Amplifier Power
at Nominal Impedance
950 x 235 x 330 mm
16 kg
2 1/2-way, bass reflex
2 x 140 mm AS cone,
magn. shielded
1 x HT 25 KST V, magn. shielded
30-180 W/channel
Crossover Frequency
Nominal / Peak Power Handling
Frequency Range
Nominal Impedance
550/2500 Hz
80 W / 120 W
35-25000 Hz
89 dB/2.8V/m
4 Ohm
Minimum Impedance
3,6 Ohm / 200 Hz