AK5850HS
A-KABEL TWINCOM HEADBAND HEADSETH ATEX
FEATURES
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Rugged headset for EX application
Noise-cancelling microphone
High quality digital background noise reduction*
HD-voice compatible*
High quality audio
Optional in-ear monitors may be connected for added damping in extreme
environments
IP Rating: IP66
Standard 4-pole Nexus connector for easy connection/replacement
For use with 1008150025, “EX-approved Cable for headset with PTT”
Designed for Turbine EX explosion-proof intercoms
*when used with Turbine Industrial intercom stations
DESCRIPTION
The AK5850HS is a high quality industrial EX approved headset for use in rugged
conditions. It offers an adjustable boom microphone and a short curly cable for flexible
connectivity through a 4-pole Nexus plug.
Used with the TAX-2b Ex approved Cable and Plugbox with PTT for EX Headset, it offers an
exceptional range of over 10 meters. The pluggable nature of the headset allows for easy
maintenance/replacement as well as allowing operators to use their personal headset as a
hearing protection aid, and disconnecting once the conversation is over.
SPECIFICATIONS
MECHANICAL
Weight
400 g
ENVIRONMENTAL
Operational Temperature
-40°C to +60°C
Ingress Protection (IP)
IP-66
ELECTRICAL
Impedance
230 ohm
Sensitivity (mic)
4 mV / 220 ohm
ACOUSTICAL
Frequency Response
90-7000 Hz
Noise Reduction
-12dB @ 1kHz
DATASHEET
AK5850HS
www.vingtor.com
www.stentofon.com
ITEM NUMBER
DESCRIPTION
AK5850HS
1008150025
A-Kabel TwinCom Headband Headseth ATEX
TAX-2b EX-approved Cable for headset with PTT
Zenitel Norway AS
Sandakerveien 24C, P.O. BOX 4498 Nydalen
NO-0403 Oslo, Norway
A-KABEL TWINCOM HEADBAND HEADSETH ATEX
SOUND ATTENUATION
Above 1kHz:
-35 to -40 dB
500-1000 Hz
-27.5 to -35 dB
125-500 Hz
-15 to -27.5 dB
H84
31 dB (with in-ear monitor: 39 dB)
M84
26 dB (with in-ear monitor: 37 dB)
L84
20 dB (with in-ear monitor: 33 dB)
SNR84
29 dB (with in-ear monitor: 40 dB)
NRR
21 dB
ORDER NUMBER
DOC NO
AK5850HS
A100K11514
03.06.2014
sales@vingtor.com
sales@stentofon.com
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. STENTOFON and VINGTOR products are developed and marketed by Zenitel.
The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.
ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel – All rights reserved.
Download PDF