PoE Splitter
Model
502900
Deliver Power over Ethernet to remote devices.
The INTELLINET NETWORK SOLUTIONS™ PoE Splitter allows you to deliver both data and electrical
power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter
you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as
Network Cameras and Wireless Access Points*, where power outlets are not readily available.
Simplify Installation for an Ethernet-based Device
Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry
about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to
100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.
802.3af Compliant Power over Ethernet
The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium
businesses a complete end-to-end PoE solution. This unit supports 802.3af ensuring compatibility with other
802.3af PoE compliant injector units or midspan switches.
Adjustable Power Output
During the setup, the PoE Splitter can be set to power any compatible 5V or 12V Ethernet-enabled device
via the volt selector located on the back.
Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all INTELLINET NETWORK SOLUTIONS
products. All items carry a full Lifetime Warranty – the strongest quality commitment anyone can make.
* Contact your INTELLINET NETWORK SOLUTIONS reseller for ordering information.
** Maximum distance per 802.3u specifications.
Model
502900
Features
• IEEE 802.3af-compliant PoE splitter
• Can be used to connect non-PoE IEEE 802.3af-compliant devices to a PoE
injector or PoE switch
• Output current, selectable: 5 V DC or 12 V DC
• Output power, max.: 19.2 W
• 10/100 auto-sensing input port — automatically detect optimal network
speeds
• RJ-45 input port with Auto-MDIX and NWAY auto-negotiation support
• Full/half duplex operation
• Compact metal case
• LED for link on PoE input port
• Lifetime Warranty
Specifications
STANDARDS
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3af (Power over Ethernet)
GENERAL
• Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45
• Ports:
- 1 RJ-45 10/100 Mbps input port for 48 V IEEE 802.3af-compliant
signal
- 1 RJ-45 10/100 Mbps output port
- 1 power output port
• Output power:
- 5 V DC or 12 V DC, selectable via switch
- Maximum output: 19.2 W
- Polarity, outer: negative ( – ); inner: positive ( + )
• Certifications: FCC Class A, CE Mark
LEDS
• LINK
ENVIRONMENTAL
• Metal housing
• Dimensions: 102 (L) x 74 (W) x 22 (H) mm (4.0 x 2.9 x 0.9 in.)
• Weight: 0.24 kg (0.5 lbs.)
• Operating temperature: 0 – 60°C (32 – 140°F)
• Operating humidity: 10 – 90% RH, non-condensing
• Storage temperature: -20 – 90°C (-4 – 194°F)
PACKAGE CONTENTS
• PoE Splitter
• Power output cable
• User manual
For more information on INTELLINET NETWORK SOLUTIONS products,
consult your local dealer or visit www.intellinet-network.com.
Copyright © INTELLINET NETWORK SOLUTIONS
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of
the contents herein, are prohibited unless specifically authorized.
INT-502900-DS-0806-01
Download PDF